ISO9001:2008 QUALITY SYSTEM PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™™
WWW.NORTHAMERICAN-STEEL.COM
MATERIALS FOR HEAVY INDUSTRIAL MAINTENANCE
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
THE “SHEFFIELD™
” BRANDS OF STEEL ARE ENGINEERED TO PROVIDE OPTIMAL
PERFORMANCE TO EXTEND SERVICE LIFE.
TG&P (4100 SERIES) ALLOY SHAFTING - SHEFFIELD™
#20
▪ Heat Treated, High Strength and Fatigue Resistant
▪ Machine Straightened (1/8” In Any 5 Ft)
▪ Deep Uniform Hardness and Fine Grain Structure
▪ Electric Furnace Melt and Vacuum Degassed
▪ Consider As Replacement For 4140, 4150, 4130, 4340 and
▪ 6150 Steels
Typical Mechanical Properties (based on 1/2” test specimen)
▪ Tensile Strength - 156,000 PSI
▪ Yield Strength - 125,000 PSI
▪ Hardness - 269/341 BHN
▪ Micro Finish - 15 RMS
Availability
English Sizes - 1/2” to 8”
Metric Sizes - 8mm to 100mm
Lengths - 10/13 Ft R/L, 20/26 Ft R/L and Custom Cut Lengths
TG&P (1100 SERIES) CARBON SHAFTING - SHEFFIELD™
#20 FM
▪ Free Machining Grade - Hybrid Steel ▪ Uniform Hardness - No Hard & Soft Spots ▪ Machinability Rating (85% of Carbon Steel) ▪ Machine Straightened (1/8” In Any 5 Ft) ▪ Consider As Replacement For 1018, 1045, ▪ 1141, 1144 and 12L14 Steels
Typical Mechanical Properties
▪ Tensile Strength - 135,000 PSI
▪ Yield Strength - 113,000 PSI
▪ Hardness - 260 BHN
▪ Micro Finish - 15 RMS (based on 1/2” test specimen)
Availability
English Sizes - 1/4” to 4” (Inquire on metric sizes.)
Lengths - 10/13 Ft R/L, 20/26 Ft R/L and Custom Cut Lengths
Please contact your local field representative or call our Cleveland
office for the latest data.
Also Available
Full Length Pre-Keyed Shafting
Chrome Plated Shafting
Case Hardened, Linear Polished Shafting
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
COLD FINISHED (4100 SERIES) ALLOY BAR - SHEFFIELD™
CD
▪ Heat Treatable, High Strength and Fatigue Resistant
▪ Excellent Wear Properties For Automation Rails
▪ Easy To Machine and Weld
▪ Fully Annealed
▪ Machine Straightened
Availability
Flats - 1/4” x 1” up to 2” x 6”
Squares - 3/8” up to 4”
Hexagons - 3/16” up to 4”
Lengths - 10/13 Ft R/L, 20/26 Ft R/L and Custom Cut Lengths
Commercial grades of steel are produced to only minimum standards. Our producing mills
manufacture our “ SHEFFIELD™” brand of steels under strict process controls to ensure the
highest degree of quality and reliability. This is known as Clean Steel Processing.
LARGE SELECTION OF COLD DRAWN & HOT ROLL SHAPES
FOR CUSTOM HARDENED, CUSTOM
MACHINED CLOSE TOLERANCE WEAR
RAILS ASK ABOUT REDI-RAIL®
REDI-RAIL®
HEAT TREATED (4100 SERIES) ALLOY BAR - SHEFFIELD™
#10
▪ Heat Treated, High Strength and Fatigue Resistant
▪ Machine Straightened (1/8” In Any 5 Ft)
▪ Deep Uniform Hardness and Fine Grain Structure
▪ Electric Furnace Melt and Vacuum Degassed
▪ Upgrade For 4140, 4150, 4130, 4340 and 6150 Steels
Typical Mechanical Properties
Tensile Strength - 156,000 PSI
Yield Strength - 125,000 PSI
Hardness - 269/341 BHN (based on 1/2” test specimen)
Availability
Rounds - 1/2” up to 16”
Squares - 5/8” up to 6”
Flats - 1/4” x 1” up to 3” x 6”
Lengths - 10/13 Ft R/L, 20/26 Ft R/L and Custom Cut Lengths
SHEFFIELD™
#10
SHEFFIELD™ CD
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
AR400 BHN WEAR PLATE - SHEFFIELD™
45XL
Typical Mechanical Properties
Tensile Strength - 182,000 PSI
Yield Strength - 142,000 PSI
Hardness - 400/440 BHN
North American Steel Company™ offers a wide range of abrasion resistant products each, suited to handle your maintenance applications. Whether your requirements are for wear chutes, bucket liners, chain returns, hoppers, screens or deflector plates, our Sheffield™ wear products are produced to give maximum performance in severe service.
ABRASION & IMPACT RESISTANT MATERIALS
AR500 BHN WEAR PLATE - SUPRA™
HT
Typical Mechanical Properties
Tensile Strength - 255,000 PSI
Yield Strength - 200,000 PSI
Hardness - 475/535 BHN
WEAR BARS & STRIPS Available in sheared strips, plasma cut strips, oxy burned, or hot rolled wear bars.
SCREEN, DECKS & GRATES Contact your local field sales representative for further details.
1/8”* 3/16” 1/4” 3/8” 1/2” 5/8” 3/4”
1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4”
48” x 96” 96” x 144”
48” x 144” 96” x 240”
48” x 288” 96” x 288”
For complete “turn-key” projects, contact our Special Services Department.
We can quote from your existing worn parts, sketches, or drawings. For
files being sent via email, send in AutoCAD format.
Shaded sizes are offered in both 400BHN
and 500BHN, otherwise just 400BHN.
*Only offered in 60” x 120”.
Also Available Upon Request 14% Manganese Products, Chromium Carbide Overlay,
and INDUCTION HARDENED 600BHN WEAR PIPE
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
Austenitic Stainless Steels (304L and 316L) get their strength and hardness from cold working. They do not respond to heat treatment. As the sizes get larger than 1-3/4” diameter, the strength drops by 40% or more. Type 410 and 416 stainless are hardenable by heat treatment, but offer very poor corrosion resistance.
Nass 45 is hardened by heat treatment. The strength does not drop off. It has consistent hardness and strength (typical 140,000 PSI) from 1/2” diameter through 9” diameter.
“NASS 45®” A HARDENED STAINLESS – THE 4340 OF THE STAINLESS WORLD.
Advantages
▪ Heat Treated, High Strength and Fatigue Resistant
▪ Easy To Machine and Easy To Weld
▪ Similar Corrosion Resistance To 316L Stainless
▪ Pump Shaft Quality Straightness (TG&P only)
▪ Double Stress Relieved - Reduces “Walking”
▪ Galling Resistant
▪ Limit Service Temperature To 800°F
▪ Replaces 304L, 316L, 410, 416, 15-5 and 17-4PH
▪ Also Available as Fine Turned Oversize
Typical Mechanical Properties (based on 1/2” test specimen)
▪ Tensile Strength - 140,000 PSI
▪ Yield Strength - 108,000 PSI
▪ Hardness - 258/294 BHN
Agency Concurrence
▪ NACE MR-01-75-97 rev. ▪ FDA
▪ AMS-5763 (chemistry only) ▪ API-6A
1/4” 1” 1-9/16” 2-1/2” 3-7/16” 5-1/2”
5/16” 1-1/8” 1-5/8” 2-9/16” 3-1/2” 6”
3/8” 1-3/16” 1-3/4” 2-11/16” 3-3/4” 6-1/2”
7/16” 1-1/4” 1-15/16” 2-3/4” 3-15/16” 6-3/4”
1/2” 1-5/16” 2” 2-15/16” 4” 7”
9/16” 1-3/8” 2-3/16” 3” 4-7/16” 8”
5/8” 1-7/16” 2-1/4” 3-1/4” 4-1/2” 9”
15/16” 1-1/2” 2-7/16” 3-3/8” 5”
Availability - Round Bar Stock x Lengths Up To 30 Ft
Availability - Bushing /Sleeve Stock x 18” Lengths
O.D. I.D. O.D. I.D. O.D. I.D.
2-1/2” 1” 4” 2” 5-1/2” 3”
3” 1-1/2” 4-1/2” 2-1/2” 6” 3”
3-1/2” 1-1/2” 5” 3” 6-1/2” 3”
Also available is Sheffield™ Stainless, our precision TGP shafting that meets and/or exceeds criteria for 316L stainless. Sheffield™ Stainless is an excellent choice for elevated temperature ap-plications.
Bushing Stock
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
Duplex Stainless Steels provide benefits that relate directly to the structure, which displays equal amounts of Austenite and Ferrite. Austenitic grades like 304L and 316L are recognized for their corrosion resistant properties. Ferritic grades like 410 and 416 series stainless are most noted for their strength values and resistance to SCC. Lean Duplex is a hybrid that provides the best of both grades.
“SHEFFIELD™ MICRO-DUPLEX” IS MORE CORROSION RESISTANT THAN 304L AND 316L STAINLESS, AND UP TO 3X STRONGER.
Advantages
▪ Easy To Machine and Easy To Weld
▪ Excellent in Sour Service
▪ Stress Corrosion Cracking (SCC) Resistance
▪ Pitting Resistance (PRE26)
▪ Corrosion Fatigue Resistance
▪ Crevice Corrosion Cracking Resistance
▪ Limit Service Temperature To 800°F
▪ Replaces 304L, 316L, 410 and 416
▪ Bearing-Fit Tolerances - TG&P only (-.0005”/-.0015”)
▪ Also Available as Fine Turned Oversize
Typical Mechanical Properties (based on 1/2” test specimen)
▪ Tensile Strength - 94,000 PSI min.
▪ Yield Strength - 65,000 PSI
▪ Hardness - 290 BHN
Agency Concurrence
▪ National Sanitation Foundation (NSF Section 61)
▪ USDA Approval (3-A Format)
Availability - Bar Stock
English Sizes - 3/4” to 5” Rounds
Metric Sizes - 20mm to 100mm Rounds
Lengths - 10/13 Ft R/L, 20/26 Ft R/L & Custom Cut Lengths
Availability - Plate Stock Sheet Size
14 Gage 3/16” 3/8”
10 Gage 1/4” 1/2”
48” x 120”
INDUSTRIES SERVED BY
LEAN DUPLEX STAINLESS
▪ Bio-Refineries ▪ Pulp and Paper
▪ Food Processing ▪ Petro-Chemical
▪ Waste Water Treatment ▪ Alternative Energy
▪ Marine ▪ Steel
Please contact your local field sales representative or
call our Cleveland office for the latest data.
HIGH DEFINITION PLASMA CUTTING
STAINLESS PLATES /
SHEETS / CUSTOMER SHAPES
SHEFFIELD™ MICRO-DUPLEX
Outperforms Most Austenitic and Martensitic
Grades In Chloride Environments
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
Fatigue remains the greatest cause of failure in severe service applications. Utilizing Clean Steel Production
Methods is the most effective means to combat fatigue and increase toughness.
Sheffield™Stud Stock is manufactured using the “thread rolling” process. This process hardens the thread, resulting in higher physical properties and a greater resistance to stretching (creep). It also eliminates, stress ris-ers, the tooling marks that cause fatigue failure.
Sheffield™Stud Stock should be considered as a suitable upgrade where maintenance applications require improved strength and durability. In high torque and high stress applications, Sheffield™Stud Stock signifi-cantly exceed the expected service life of other threaded products and conforms to specifications for: ASTM
A193, Grade B7.
Advantages
▪ Heat Treated & High Strength
▪ Roll Thread vs. Cut Thread
▪ Excellent Toughness
▪ Superior Surface Finish
▪ Less Creep
▪ Consistent Grain Structure
▪ Strain Hardened Threads
▪ High Degree of Accuracy
Typical Mechanical Properties
▪ Tensile Strength - 156,000 PSI
▪ Yield Strength - 134,000 PSI
▪ Hardness - 321 BHN
▪ (based on 1/2” test specimen)
SHEFFIELD™ STUD STOCK
COMMERCIAL THREADED BAR
Precision Fit &
Smooth Surfaces
Tooling Marks 1/4” (28) 9/16” (18) 1-1/8” (12)
5/16” (24) 5/8” (18) 1-1/4” (12)
3/8” (24) 3/4” (16 ) 1-3/8” (12)
7/16” (20) 7/8” (14) 1-1/2” (12)
1/2” (20) 1” (12,14) 2” (12)
1/4” (20) 9/16” (12) 1-1/8” (7) 2” (4-1/2)
5/16” (18) 5/8” (11) 1-1/4” (7) 2-1/4” (4-1/2)
3/8” (16) 3/4” (10) 1-3/8” (6) 2-1/2” (4)
7/16” (14) 7/8” (9) 1-1/2” (6)
1/2” (13) 1” (8) 1-3/4” (5)
National Fine
National Coarse
1” (8) 1-5/8” (8)
1-1/8” (8) 1-3/4” (8)
1-1/4” (8) 1-7/8” (8)
1-3/8”(8) 2” (8)
1-1/2” (8) 2-1/8” (8)
Eight Pitch Series
Diameter Thread Pitch
Alternate Pitch
Diameter Thread Pitch
Alternate Pitch
3/8” 12 - 1-1/4” 5 4
1/2” 10 - 1-1/2” 4 5
5/8” 8 6 1-3/4” 4 5
3/4” 6 8 2” 4 -
7/8” 6 - 2-1/2” 4 -
1” 5 4, 6, 8
Acme Availability
▪ 10/12 FT R/L
▪ Custom Lengths
11/14 rev.2
CLEVELAND, OHIO PHONE: 1.800.321.9310 FAX: 1.800.441.5052
™
HEAVY INDUSTRY
MAINTENANCE MATERIALS
TG&P 4100 SERIES SHAFTING
TG&P PRE-KEYED SHAFTING
HEAT TREATED 4100 SERIES BAR
COLD FINISHED 4100 SERIES BAR
PRECISION “WEAR” RAILS
HARDENED “PSQ” STAINLESS
LEAN DUPLEX STAINLESS
THREADED PRODUCTS
PRECISION-FIT KEYSTOCK
AR400 / AR500 / AR600 PRODUCTS
METRIC SIZED METALS
™
WWW.NORTHAMERICAN-STEEL.COM
At North American Steel Company™, we stock a variety of high strength steels that are available in metric sizes including; alloy, carbon steel, stainless steel, threaded rod, and keystock. We supply our metric sized steels in several finishes such as: TG&P, TG&P bearing-fit, Cold Drawn and Chrome Plated.
METRIC TG&P SHAFTING
Carbon Steel / Alloy Steel / Stainless Steel / Chrome Plated Steel /
Induction Hardened Chrome Plated Steel / Linear Shaft Steel
4mm 10mm 16mm 22mm 28mm 40mm 70mm
5mm 11mm 17mm 23mm 30mm 45mm 80mm
6mm 12mm 18mm 24mm 32mm 50mm 90mm
7mm 13mm 19mm 25mm 35mm 55mm 100mm
8mm 14mm 20mm 26mm 36mm 60mm
9mm 15mm 21mm 27mm 38mm 65mm
IN STOCK – READY FOR IMMEDIATE SHIPMENT
METRIC SQUARES
Alloy Steel
20mm 40mm
25mm 50mm
30mm
Other sizes may be available,
please contact us for details.
METRIC SQUARES
Carbon Steel (Keystock)
5mm 10mm 15mm 20mm 32mm 45mm
6mm 12mm 16mm 25mm 35mm 50mm
8mm 14mm 18mm 30mm 40mm
METRIC THREADED ROD
Alloy Steel (B-7 / Rolled Threads)
4mm 12mm 22mm 24mm 39mm
5mm 14mm 16mm 27mm
6mm 16mm 18mm 30mm
8mm 18mm 20mm 33mm
10mm 20mm 22mm 36mm
Please contact your local field sales representative for the latest data.