PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 8
EXTREMELY HARD VERY HARD HARD MEDIUM SOFT VERY SOFT
ITEM DESCRIPTION IDEAL USE
HOL.502631QCSHOL.502535QCS
Yellow DS 25 GritYellow SS 25 Grit
Designed for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.502632QCS HOL.502536QCS
Yellow DS 40 GritYellow SS 40 Grit
Designed to hone concrete for diamond polishing or thin mil coating application
HOL.502633QCSHOL.502537QCS
Yellow DS 80 GritYellow SS 80 Grit
Follows 40 Grit, often used as a first step on new concrete, ideal prep for acid staining
HOL.502634QCSHOL.502538QCS
Yellow DS 150 GritYellow SS 150 Grit
Follows the 80 Grit in polishing to leave a smooth, even profile
ITEM DESCRIPTION IDEAL USE
HOL.502555QCSHOL.502549QCS
Gold DS 16 Grit Gold SS 16 Grit
Designed for exposing large aggregate and removing or prepping for 10-20 mil coatings
HOL.5025555QCSHOL.5025495QCS
Gold DS 25 GritGold SS 25 Grit
Designed for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.502556QCSHOL.502550QCS
Gold DS 40 Grit Gold SS 40 Grit
Designed to hone concrete for diamond polishing or thin mil coating preparation
HOL.502557QCSHOL.502551QCS
Gold DS 80 GritGold SS 80 Grit
Follows 40 Grit used as a first step on new concrete, ideal prep for acid staining
HOL.502558QCSHOL.502552QCS
Gold DS 150 GritGold SS 150 Grit
Follows the 80 Grit in polishing to leave a smooth, even profile
HOL.502559QCS Gold DS 300 GritRemoves 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond
HOL.502621QCS HOL.502629QCS
Gold DS 25 Grit ArrowGold SS 25 Grit Arrow
Follows the 80 Grit in polishing to leave a smooth, even profile
Very soft bond used to grind extremely hard concrete floors.
YE
LLO
W S
ER
IES
GO
LD S
ER
IES
EXTREMELY HARD VERY HARD HARD MEDIUM SOFT VERY SOFT
Very soft bond used to grind very hard to hard concrete floors.
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 9
Soft bond used to grind hard to medium concrete floors.
ITEM DESCRIPTION IDEAL USE
HOL.502601QCS Blue DS 6 Grit Designed for exposing large aggregate and removing or prepping for 20 mil coatings
HOL.502602QCS Blue DS 16 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.5026025QCS Blue DS 25 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.502603QCS Blue DS 40 Grit Designed to hone concrete for diamond polishing or thin mil coating preparation
HOL.502604QCS Blue DS 80 Grit Designed to follow 40 Grit, often used as a first step on new concrete, ideal prep for acid staining
HOL.502605QCS Blue DS 150 Grit Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile
HOL.502606QCS Blue DS 300 Grit Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond
HOL.502620QCSHOL.502628QCS
Blue DS 25 Grit ArrowBlue SS 25 Grit Arrow
Fast effective coatings removal and floor preparation
ITEM DESCRIPTION IDEAL USE
HOL.502612QCSHOL.502542QCS
Red DS 16 GritRed SS 16 Grit
Designed for exposing large aggregate and removing or prepping for 10-20 mil coatings
HOL.5026125QCS Red DS 25 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.502613QCSHOL.502543QCS
Red DS 40 GritRed SS 40 Grit
Designed to hone concrete for diamond polishing or thin mil coating preparation
HOL.502614QCS Red DS 80 Grit Follows 40 Grit, used as a first step on new concrete, ideal prep for acid staining
HOL.502615QCS Red DS 150 Grit Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile
HOL.502616QCS Red DS 300 GritRemoves 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond
HOL.502619QCSHOL.502627QCS
Red DS 25 Grit ArrowRed SS 25 Grit Arrow
Fast effective coatings removal and floor preparation
Medium bond used to grind medium to soft concrete floors.
BLU
E S
ER
IES
RE
D S
ER
IES
EXTREMELY HARD VERY HARD HARD MEDIUM SOFT VERY SOFT
EXTREMELY HARD VERY HARD HARD MEDIUM SOFT VERY SOFT
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 10
ITEM DESCRIPTION IDEAL USE
HOL.502622QCS Black DS 16 Grit Designed for exposing large aggregate and removing or prepping for 10-20 mil coatings
HOL.5026225QC Black DS 25 Grit Designed for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.502623QCS Black DS 40 Grit Designed to hone concrete for diamond polishing or thin mil coating preparation
HOL.502624QCS Black DS 80 Grit Designed to follow 40 Grit, often used as a first step on new concrete, ideal to prep for acid staining
HOL.502625QCS Black DS 150 Grit Designed to follow the 80 Grit in polishing applications to leave a smooth, even profile
HOL.502626QCS Black DS 300 Grit Removes 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond
EXTREMELY HARD VERY HARD HARD MEDIUM SOFT VERY SOFT
BLA
CK
SE
RIE
S
Hard bond used to grind soft concrete floors.
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 11
ITEM DESCRIPTION IDEAL USE
HOL.502607QCS Orange DS 16 GritDesigned for exposing large aggregate and removing or prepping for thin mil coatings
HOL.5026075QC Orange DS 25 GritDesigned for exposing large aggregate or removing or prepping for 10 mil coatings
HOL.502608QCS Orange DS 40 GritDesigned to hone concrete for diamond polishing or thin mil coating preparation
HOL.502609QCS Orange DS 80 Grit Designed to follow 40 Grit, often used as a first step on new concrete, ideal prep for acid staining
HOL.502610QCS Orange DS 150 GritDesigned to follow the 80 Grit in polishing applications to leave a smooth, even profile
HOL.502611QCS Orange DS 300 GritRemoves 150 Grit scratch pattern and leaves an ideal profile prior to going to a resin bond diamond
ITEM DESCRIPTION IDEAL USE
HOL.502808QCS Orange Long Life 30/40 Grit
Designed for smoothing out broom finished and heavy shot blasted concrete surfaces
HOL.502809QCS Orange Long Life 60/80 Grit
Designed for smoothing rained on slabs,sight shot blasted concrete and for removing thin coatings
HOL.502810QCS Orange Long Life 120/150 Grit
Designed for smoothing rained on slabs and extremely soft concrete
were engineered for the most abrasive grinding applications, including rained on concrete, spalled concrete, broom finished concrete, and shot blasted floors.
The Orange Series Long Life Diamonds
OR
AN
GE
SE
RIE
S
EXTREMELY HARD VERY HARD HARD MEDIUM SOFT VERY SOFT
Very hard bond used to grind very soft concrete floors.
OR
AN
GE
SE
RIE
S
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 12
ITEM DESCRIPTION
HOL.800753HOL.800740HOL.800741HOL.800749
5 Segment Gold 18/20 Grit5 Segment Gold 30/40 Grit5 Segment Gold 60/80 Grit5 Segment Gold 120/150 Grit
HOL.800754HOL.800742HOL.800743HOL.800750
10 Segment Gold 18/20 Grit10 Segment Gold 30/40 Grit10 Segment Gold 60/80 Grit10 Segment Gold 120/150 Grit
HOL.800755HOL.800744HOL.800745HOL.800751
5 Segment Blue 18/20 Grit5 Segment Blue 30/40 Grit5 Segment Blue 60/80 Grit5 Segment Blue 120/150 Grit
HOL.800756HOL.800746HOL.800747HOL.800752
10 Segment Blue 18/20 Grit10 Segment Blue 30/40 Grit10 Segment Blue 60/80 Grit10 Segment Blue 150 Grit
HOL.800757HOL.800759HOL.800761HOL.800763
5 Segment Black 18/20 Grit5 Segment Black 30/40 Grit5 Segment Black 60/80 Grit5 Segment Black 120/150 Grit
HOL.800758HOL.800760HOL.800762HOL.800764
10 Segment Black 18/20 Grit10 Segment Black 30/40 Grit10 Segment Black 60/80 Grit10 Segment Black 120/150 Grit
3" METAL BOND PUCK DIAMONDS
3"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 13
ITEM DESCRIPTION IDEAL USE
HOL.200809 D2 Hybrid Diamonds80 Grit
Followed by Xenith pads for polishing overlays
HOL.200810 D2 Hybrid Diamonds120 Grit
Followed by Xenith pads for polishing overlays
HYBRID STYLE DIAMONDS
ITEM DESCRIPTION IDEAL USE
HOL.502832Y3” QuikCut Hybrid Diamond Yellow Series, Medium Grit
For quick, aggressive cutting on new concrete. (For hard concrete)
HOL.502832B 3” QuikCut Hybrid Diamond, Black Series, Medium Grit
For quick, aggressive cutting on new concrete. (For soft to medium concrete)
HOL.502838Y 2” QuikCut Hybrid Diamond, Yellow Series, Medium Grit
For quick, aggressive cutting on new concrete. (For hard concrete)
HOL.502838B 2” QuikCut Hybrid Diamond, Black Series, Medium Grit
For quick, aggressive cutting on new concrete. (For soft to medium concrete)
QuikCut hybrids are the perfect transition diamond as you move from metal to resin bond. In some applications, these diamonds can be used as the initial cut, thus eliminating the use of a metal bond.
3" & 2" HYBIRD BOND DIAMONDS
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 14
ITEM DESCRIPTION
HOL.400500 3" Hybrid Diamond Puck Lime Green 30 Grit
HOL.400502 3” Hybrid Diamond Puck Grey 50 Grit
HOL.400503 3” Hybrid Diamond Puck Black 100 Grit
HOL.400504 3” Hybrid Diamond Puck Blue 200 Grit
HOL.400505 3” Hybrid Diamond Puck Red 400 Grit
These hybrid pucks are fast cutting and designed to use wet or dry.
ITEM DESCRIPTION
HOL.300601 3" Hybrid Puck Wet 50 Grit
HOL.300602 3" Hybrid Puck Wet 100 Grit
HOL.300603 3" Hybrid Puck Wet 200 Grit
HOL.300604 3" Hybrid Puck Wet 400 Grit
These hybrid pucks are fast cutting and designed to use wet.
3" HYBRID BOND PUCK DIAMONDS
3" HYBRID BOND WET PUCK DIAMONDS
3"
3"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 15
ITEM DESCRIPTION IDEAL USEHOL.200839 50 Grit Grey Removal of scratches left by metal bonds
HOL.200840 100 Grit Black Used as the first step in polishing
HOL.200841 200 Grit Blue Typically used as the last step before dye and densifier are applied
HOL.200842 400 Grit Red Used to remove 200 Grit profile
HOL.200843 800 Grit White Provides high shine, last step in polishing of retail stores
HOL.200844 1500 Grit Yellow Provides a very high shine
ITEM DESCRIPTION IDEAL USE
HOL.300705 3" 800 Grit White High shine
HOL.300706 3" 1500 Grit Yellow A very high shine
HOL.300707 3" 3000 Grit Green The highest shine
SERIESX
2" RESIN BOND DIAMONDS
3" RESIN BOND DIAMONDS
ITEM DESCRIPTION IDEAL USE
HOL.502710 3” Puck Style Grey 50 Grit Resin Removal of scratches left by metal bonds
HOL.502711 3” Puck Style Black 100 Grit Resin Used as the first step in polishing
HOL.502712 3” Puck Style Blue 200 Grit Resin Used for removal of 100 grit scratches
HOL.502713 3” Puck Style Red 400 Grit Resin Used as the last step before dye and densifier are applied
HOL.502714 3" Puck Style White 800 Grit Resin Provides a high shine, often the last step in polishing fo retail stores
HOL.502715 3" Puck Style Yellow 1500 Grit Resin Provides a very high shine
HOL.502716 3" Puck Style Gree 3000 Grit Resin Provides the highest shine
“Hockey” Puck StyleResin Bond Diamonds
2"
3"
3"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 16
SASE offers a complete line of PCD (poly crystalline diamonds) and Removal Tools for fast, effective removal of coatings and self-levelers.
ITEM DESCRIPTION IDEAL USE
HOL.200996QCS
HOL.200997QCS
PCD Split SS QCS
PCD Split DS QCS
For fast, effective thin mil coatings removal.
HOL.200993(A)
HOL.200994(B)
PCD ¼ Round DS
*PCD ¼ Round DS <opposite>
For fast, effective thick mil coatings removal. Tears through elastic or rubberized membranes and compounds.
HOL.200510(A)
HOL.200511(B)
Silver PCD Wear Bar
*Silver PCD Wear Bar DS <opposite>
Removes thin to medium mil coatings without damaging the concrete surface. Diamond wear bar controls the depth of the cut.
HOL.201012(A) HOL.201013(B)
Gold PCD Diamond Plate 270mm *Gold PCD Diamond Plate 270mm <opposite>
Ideal for removing medium to thick mil coatings. 10 PCD segments versus 6, providing maximum removal.
HOL.201014(A) HOL.201015(B)
Silver PCD Diamond Plate with Wear Bar, 270mm
*Silver PCD Diamond Plate with Wear Bar, 270mm <opposite>
Removes thin to medium mil coatings without damaging the concrete surface. Diamond wear bar controls the depth of the cut while leaving a smooth profile.
NB.13.118 Screw, Flat Head Socket CapFor use with non-plate style PCD tooling. Requires three per segment.
WÜLFREMOVAL TOOLING
ITEM DESCRIPTION IDEAL USE
HOL.904150 Tungsten Scraper Holder w/ Scraper Squares (complete unit)
For quick and easy removal of even the thickest and most difficult mastics
HOL.SPMW643 Tungsten Scraper Square For quick and easy removal of even the thickest and most difficult mastics
HOL.904145 Tungsten Holder For quick and easy removal of even the thickest and most difficult mastics
HOL.900000 Screws, Flat Head Socket Cap For use with non-plate style PCD tooling. Requires 3 per segment
TUNGSTEN SCRAPER SQUARES
Note: These are directional tools. (A) clockwise │ (B) counter-clockwisePropane Plantary Ginders only use (B) counter-clockwise
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 17
ITEM DESCRIPTION IDEAL USE
SAS.905999 270mm Bush Hammer Complete PlateCoarse profile, 45 pin Fits PDG 8000
SAS.905800 45 Pin Roller w / Holder, Coarse Fits PDG 8000
SAS.905700 45 Roller Only, Coarse Fits PDG 8000
SAS.905600 Holder Only (for use with medium & coarse) Fits PDG 8000
SAS.905998 270mm Bush Hammer Complete PlateMedium profile, 100 pin Fits PDG 8000
SAS.905701 100 Pin Roller Only Holder, Medium Fits PDG 8000
SAS.905801 100 Pin Roller w / Holder, Medium Fits PDG 8000
SAS.905500 230mm Bush Hammer Complate PlateStandard profile Fits PDG 6000 & 5000
SAS.20016 Mounting head assembly, 5K bush hammer Fits PDG 5000
SAS.20016 Roller, 5K Bush Hammer Fits PDG 5000
SAS.20007 Bearing, 5k Bush Hammer Fits PDG 5000
SAS.00178 240mm Bush Hammer PlateStandard profile Fits Diamatic
A bush hammer is a tungsten tip tool used to remove coatings or texture concrete. The 45/100 pins leave an excellent profile for the bonding of coatings and overlays. This tool is also effective at creating a non-stick profile suitable for both inside and outside environments.
BUSH HAMMER
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 18
ITEM DESCRIPTION IDEAL USE
SC30.500502 3” Metal Flex Aqua 30 Grit Aggressive cutting without gouging
SC30.500503 3” Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete
SC30.500504 3” Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads
The Metal Flex diamonds are ideal for removing mastics and sealers, and to profile edges without gouging the floor. Each individual diamond segment is 1/8” and won’t bind or close up.
ITEM DESCRIPTION IDEAL USE
SC30.500240 3” Polishing Resin Bond Diamond Grey 50 Grit Removal of scratches left by metal bonds
SC30.500241 3” Polishing Resin Bond Diamond Black 100 Grit Used as the first step in polishing
SC30.500242 3” Polishing Resin Bond Diamond Blue 200 Grit Used for removal of 100 Grit scratches
SC30.500243 3” Polishing Resin Bond Diamond Red 400 Grit Typically used as the last step before dye and densifier are applied
SC30.500244 3” Polishing Resin Bond Diamond White 800 Grit Provides a high shine, often the last step in polishing of retail stores
SC30.500245 3” Polishing Resin Bond Diamond Yellow 1500 Grit Provides a very high shine
SC30.500246 3” Polishing Resin Bond Diamond Green 3000 Grit Provides a very high shine
These polishing diamonds work great under smaller, lighter weight machines, and are a great alternative for concrete polishing. Good on various self-leveling compounds.
3" METAL FLEX DIAMONDS
3" POLISHING RESIN BOND DIAMONDS
3"
3"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 19
ITEM DESCRIPTION IDEAL USE
SC50.500502 5” Metal Flex Aqua 30 Grit Aggressive cutting without gouging
SC50.500503 5” Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete
SC50.500504 5” Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads
The Metal Flex Pads are ideal for removing mastics and to profile edges without gouging the floor. Each individual diamond segment is 1/8” and won’t bind or close up providing an extended life. These diamonds are for use on the SASE SC50 and other industry 5” hand grinders.
ITEM DESCRIPTION IDEAL USE
SC50.500240 5” Polishing Resin Bond Diamond Grey 50 Grit Removal of scratches left by metal bonds
SC50.500241 5” Polishing Resin Bond Diamond Black 100 Grit Used as the first step in polishing
SC50.500242 5” Polishing Resin Bond Diamond Blue 200 Grit
Used for removal of 100 Grit scratches and as the last step before concrete dye in some applications
SC50.500243 5” Polishing Resin Bond Diamond Red 400 Grit
Typically used as the last step before dye and densifier are applied
SC50.500244 5” Polishing Resin Bond Diamond White 800 Grit
Provides a high shine, often the last step in polishing of retail stores
SC50.500245 5” Polishing Resin Bond Diamond Yellow 1500 Grit Provides a very high shine
SC50.500246 5” Polishing Resin Bond Diamond Green 3000 Grit Provides the highest shine
These diamonds are excellent for concrete polishing edge work. For use on the SASE SC50 and other industry 5” hand grinders.
5" POLISHING DIAMONDS
5" METAL FLEX DIAMONDS
5"
5"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 20
ITEM DESCRIPTION IDEAL USE
SC50.500400 5” SURE CUT Copper Polishing Diamond Aqua 30 Grit
Often used in place of the 50 Grit metal bond for removal of thin mil coatings and sealers
SC50.500401 5” SURE CUT Copper Polishing Diamond Grey 50 Grit
Often used in place of the 100 Grit metal bond for removal of thin mil coatings and sealers
SC50.500402 5” SURE CUT Copper Polishing Diamond Black 100 Grit
Often used to reduce scratches left from 50 Grit metal bond
These copper bonded diamonds provide improved longevity and elimination of swirl marks. These diamonds are for use on the SASE SC50 and other industry 5” hand grinders.
ITEM DESCRIPTION IDEAL USE
SC50.900901 5” Rigid Backer Pad 5/8” Arbor Preferred use with 5” Metal Flex
SC50.900902 5” Flexible Backer Pad 5/8” Arbor Preferred use with 5” Resin Polishing Pad
5" SURE CUT COPPER BOND DIAMONDS
5" BACKER PADS
Item Description Ideal Use
SC50.500339 5" Honeycomb Pad, Lime 30 Grit Aggressive cut, quick & fast
SC50.500340 5" Honeycomb Pad, Blue 50 Grit Aggressive cut, quick & fast
SC50.500341 5" Honeycomb Pad, Yellow 100 Grit Aggressive cut, quick & fast
SC50.500342 5" Honeycomb Pad, Orange 200 Grit Aggressive cut, quick & fast
SC50.500343 5" Honeycomb Pad, Red 400 Grit Aggressive cut, quick & fast
SC50.500344 5" Honeycomb Pad, Green 800 Grit Aggressive cut, quick & fast
5" HONEYCOMB PADS
These dry polishing pads are the most economicaland productive way to do edge work.
5"
5"
5"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 21
ITEM DESCRIPTION IDEAL USE
SC60.500249 6” Metal Flex Yellow 16 Grit Very Aggressive cutting without gouging
SC60.500250 6” Metal Flex Aqua 30 Grit Aggressive cutting without gouging
SC60.500251 6” Metal Flex Grey 50 Grit Ideal for removing sealers and as a first cut on new concrete
SC60.500252 6” Metal Flex Black 100 Grit Removes scratches left by 50 Grit Metal Flex Pads
The Metal Flex Pads are ideal for removing mastics and to profile edges without gouging the floor. Each individual diamond segment is 1/8” and won’t bind or close up providing an extended life.
6" METAL FLEX DIAMONDS
5" HYBRID EDGE PAD
6" HYBRID EDGE PRO PAD
ITEM DESCRIPTION IDEAL USE
SC.50500600 5" Hybrid Edge Pad For use on SC50
ITEM DESCRIPTION IDEAL USE
SC.60500260 6” Hybrid edge pro pad 100 Grit SASE Edge Pro 180
Using this new high quality SASE hybrid edge tooling will eliminate steps in the edge polishing process.
Using this new high quality SASE hybrid edge tooling will eliminate steps in the edge polishing process.
ITEM DESCRIPTION IDEAL USE
SAS.04015 5" Rapid strip disc, coarse wheel used to sand structural polyurethane off of polished concrete For use on SC50
5" RAPID STRIP DISC
6"
6"
5"
5"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 22
Excellent for concrete polishing edge work, these diamonds are designed to be used on the SASE EDGE PRO 180.
Item Description Ideal Use
SC60.500240 6” Polishing Resin Diamond Grey 50 Grit Removal of scratches left by metal bonds
SC60.500241 6” Polishing Resin Diamond Black 100 Grit Used as the first step in polishing
SC60.500242 6” Polishing Resin Diamond Blue 200 Grit Used for removal of 100 Grit scratches
SC60.500243 6” Polishing Resin Diamond Red 400 Grit Typically used as the last step before dye and densifier are applied
SC60.500244 6” Polishing Resin Diamond White 800 Grit Provides a high shine, often the last step in retail stores
SC60.500245 6” Polishing Resin Diamond Yellow 1500 Grit Provides a very high shine
SC60.500246 6” Polishing Resin Diamond Green 3000 Grit Provides the highest shine
6" POLISHING DIAMONDS
6"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 23
Item Description Ideal Use
HOL.502901 Corner Metal Bond Diamond Green 60 Grit Removal of cream and sealers
HOL.502902 Corner Metal Bond Diamond Black 120 Grit Removal of 60 Grit metal bond scratches
HOL.502903 Corner Metal Bond Diamond Red 200 Grit Readies corners for polishing
HOL.502904 Corner Metal Bond Diamond Yellow 400 Grit First polishing step of corners
These corner polishing pads are ideal for corners and tight areas and are designed to be used on the SASE Corner Polisher.
Item Description Ideal Use
HOL.502905 Corner Resin Bond Diamond White 500 Grit Creates a high shine
HOL.502906 Corner Resin Bond Diamond Blue 1000 Grit Creates a high shine
HOL.502907 Corner Resin Bond Diamond Orange 3000 Grit Creates the highest shine
These corner polishing pads are ideal for corners and tight areas and are designed to be used on the SASE Corner Polisher.
SAS.FMM0510 Pad, 2pk Corner Polisher
Item Description
CORNER POLISHING METAL BOND DIAMONDS
CORNER POLISHING RESIN BOND DIAMONDS
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 24
TECHNICAL DATA
Item Number: SSP.219023
Diameter 21”
Capacity Holds Ten 3” (7.5 cm) Diamond Polishing Pads
TECHNICAL DATA
Item Number: SSP.279002
Diameter 27”
Capacity Holds Fifteen 3” (7.5 cm) Diamond Polishing Pads
SC30.500240 Grey 50 Grit
SC30.500241 Black 100 Grit
SC30.500242 Blue 200 Grit
SC30.500243 Red 400 Grit
SC30.500244 White 800 Grit
SC30.500245 Yellow 1500 Grit
SC30.500246 Green 3000 Grit
TECHNICAL DATA
Item Number: SSP.209034
Diameter 20”Capacity Holds Ten 3” (7.5 cm) Diamond Polishing Pads
Carrier pads available in 27”, 21” & 20”
GALAXY 3" Resin Pads
SASE GALAXY SYSTEM
27"
21"
20"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 25
ITEM DESCRIPTION IDEAL USE
SC50.900702C 5” QUIKCUT Edge WheelCoarse Grey
For stock removal of concrete and mastics, rubbers, epoxies, and other coatings
SC50.900701M 5” QUIKCUT Edge WheelMedium Blue
For stock removal of concrete and mastics, rubbers, epoxies, and other coatings
SC50.900700F 5” QUIKCUT Edge WheelFine Yellow Aggressive removal of thin to medium coatings
Our advanced technology 3 step edge wheel polishing system with outstanding finishes. This system will reduce your time by up to 50% compared with conventional methods.
ITEM DESCRIPTION IDEAL USE
SC50.900608 5” 18 Segment Cup Wheel Threaded
For stock removal of concrete and mastics, rubbers, epoxies, and other coatings
SC50.900609 5” T-Segment Cup Wheel Threaded
For stock removal of concrete and mastics, rubbers, epoxies, and other coatings
SC50.900610 5” Arrow Segment Cup Wheel Threaded Aggressive removal of thin to medium coatings
SC50.900810 5” Hybrid Resin Filled Coarse Threaded
Ideal for light surface prep or for polished concrete edge work to expose minimal aggregate, while leaving a smooth profile and blending edges
SC50.900811 5” Hybrid Resin Filled Medium Threaded
Ideal for light surface prep or for polished concrete edge work, leaving a smooth profile and blending edges
SC50.900812 5” Hybrid Resin Filled Fine Threaded
Ideal for polished concrete edge work, leaving a smooth profile and blending edges
SC50.900711 5” Diamond Cluster Cup Wheel Medium Grit
Fast aggressive removal of paints, epoxies and glue
The 5” cup wheels are excellent for coatings removal and aggregate exposure of concrete surfaces, and are used on the SASE SC50 and all other industry 5” hand grinders.
5" HYBRID CUP WHEELS
5" CUP WHEELS
5"
5"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 26
ITEM DESCRIPTION IDEAL USE
SC70.850802C 7” QUIKCUT Edge WheelCoarse Grey
For stock removal of concrete and mastics, rubbers, epoxies, and other coatings
SC70.850801M 7” QUIKCUT Edge WheelMedium Blue
For stock removal of concrete and mastics, rubbers, epoxies, and other coatings
SC70.850800F 7” QUIKCUT Edge WheelFine Yellow Aggressive removal of thin to medium coatings
Item Description Ideal Use
SC70.900613SC70.900607
7” 6 PCD Segment Wulf Series Non-Threaded7” 6 PCD Segment Wulf Series Threaded
Removal of thick mil coatings and self levelers
SC70.900614SC70.900615
7” 10 Segment Arrow Configuration Non-Threaded 7” 10 Segment Arrow Configuration Threaded
Fast, aggressive thin to medium mil coatings removal
SC70.900605SC70.900619
7” 14 Segment T Configuration Non-Threaded 7” 14 Segment T Configuration Threaded Light prep work
SC70.900600SC70.900617
7” 24 Segment Turbo Non-Threaded 7” 24 Segment Turbo Threaded Prep
SC70.900603SC70.900618
7” 12 Segment Turbo Non-Threaded7” 12 Segment Turbo Threaded Aggressive prep
SC70.900601 7” 12 Segment Single Row Non-Threaded Aggressive prep
SC70.900602 7” 24 Segment Double Row Non-Threaded Prep
SC70.900604 7” 18 Segment 9 Long, 9 Short Non-Threaded Thin mil removal
SC70.90016 7” Diamond Cluster Cup Wheel Medium Grit Fast aggressive removal of paints, glue and epoxies
The 7” cup wheels are excellent for coatings removal and aggregate exposure of concrete surfaces. They are used on the SASE SC70 and other industry 7” hand grinders.
Our most advanced technology, a three step edge wheel polishing system with outstanding finishes. Reduces your time by up to 50% compared with conventional methods.
7" HYBRID CUP WHEELS
7" CUP WHEELS
7"
7"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 27
ITEM DESCRIPTION
HOL.400880 50 Grit Xenith MR Pad
HOL.400881 100 Grit Xenith MR Pad
HOL.400882 200 Grit Xenith MR Pad
HOL.400883 400 Grit Xenith MR Pad
HOL.400884 800 Grit Xenith MR Pad
HOL.400885 1500 Grit Xenith MR Pad
HOL.400886 3000 Grit Xenith MR Pad
11" XENITH MR PADS
For use on SASE Tri-Force 3 head polisher
MAINTENANCE & REPAIR
11"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 28
ITEM DESCRIPTIONHOL.200811 50 Grit Xenith Pad
HOL.200812 100 Grit Xenith Pad
HOL.200813 200 Grit Xenith Pad
HOL.200814 400 Grit Xenith Pad
HOL.200815 800 Grit Xenith Pad
HOL.200816 1500 Grit Xenith Pad
HOL.200817 3000 Grit Xenith Pad
5" Xenith pads for use on SASE SC50 and other 5" hand grinders
ITEM DESCRIPTION
HOL.200833 50 Grit Xenith Pad
HOL.200834 100 Grit Xenith Pad
HOL.200835 200 Grit Xenith Pad
HOL.200836 400 Grit Xenith Pad
HOL.200837 800 Grit Xenith Pad
HOL.200838 1500 Grit Xenith Pad
HOL.200839 3000 Grit Xenith Pad
6" Xenith pads for use on SASE Edge Pro 180
ITEM DESCRIPTION
HOL.3008505 30 Grit Xenith Pad
HOL.300850 50 Grit Xenith Pad
HOL.300851 100 Grit Xenith Pad
HOL.300852 200 Grit Xenith Pad
HOL.300853 400 Grit Xenith Pad
HOL.300854 800 Grit Xenith Pad
HOL.300855 1500 Grit Xenith Pad
HOL.300863 3000 Grit Xenith Pad
8" Xenith Pads for use on SASE PDG 5000, PDG 6000 and other industry grinders
Ideal for polishing concrete and overlays. Designed to prevent scratching while polishing concrete.
XENITH PADS
5"
6"
8"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 29
ITEM DESCRIPTION
HOL.3008645 30 Grit Xenith Pad
HOL.300864 50 Grit 9" Xenith Pad
HOL.300865 100 Grit 9"Xenith Pad
HOL.300866 200 Grit 9"Xenith Pad
HOL.300867 400 Grit 9"Xenith Pad
HOL.300868 800 Grit 9"Xenith Pad
HOL.300869 1500 Grit 9"Xenith Pad
HOL.300870 3000 Grit 9"Xenith Pad
ITEM DESCRIPTION
HOL.3008715 30 Grit Xenith Pad
HOL.300871 50 Grit Xenith Pad
HOL.300872 100 Grit Xenith Pad
HOL.300873 200 Grit Xenith Pad
HOL.300874 400 Grit Xenith Pad
HOL.300875 800 Grit Xenith Pad
HOL.300876 1500 Grit Xenith Pad
HOL.300877 3000 Grit Xenith Pad
17" Xenith Pads for use on PDG 9500 Plus
9" Xenith Pads for use on the 500 and other industry grinders
11" Xenith Pads for use on the SASE PDG 8000, 800 series, 820, G320, 3200 and other industry 32" grinders
ITEM DESCRIPTION
HOL.3008785 30 Grit Xenith Pad
HOL.300878 50 Grit Xenith Pad
HOL.300879 100 Grit Xenith Pad
HOL.300880 200 Grit Xenith Pad
HOL.300881 400 Grit Xenith Pad
HOL.300882 800 Grit Xenith Pad
HOL.300883 1500 Grit Xenith Pad
HOL.300884 3000 Grit Xenith Pad
XENITH PADS
9"
11"
17"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 30
ITEM DESCRIPTION IDEAL USE
SSP.27.40100 27” TRIFECTA PAD 100 Grit Used for burnishing and restoration under 27” burnishers
SSP.27.40400 27” TRIFECTA PAD 400 Grit Used for burnishing and restoration under 27” burnishers
SSP.27.40800 27” TRIFECTA PAD 800 Grit Used for burnishing and restoration under 27” burnishers
SSP.27.41500 27” TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 27” burnishers
SSP.27.43000 27” TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 27” burnishers
ITEM DESCRIPTION IDEAL USE
SSP.24.30100 24” TRIFECTA PAD 100 Grit Used for burnishing and restoration under 24” burnishers
SSP.24.30400 24” TRIFECTA PAD 400 Grit Used for burnishing and restoration under 24” burnishers
SSP.24.30800 24” TRIFECTA PAD 800 Grit Used for burnishing and restoration under 24” burnishers
SSP.24.31500 24” TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 24” burnishers
SSP.24.33000 24” TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 24” burnishers
These pads will mount to a high speed burnisher to restore shine or burnish in guard. Use our TRIFECTA pads for a full rejuvenation of a polished concrete floor & remove imperfections left by the polishing process.
ITEM DESCRIPTION IDEAL USE
SSP.17.10100 17” TRIFECTA PAD 100 Grit Used for burnishing and restoration under 17” burnishers
SSP.17.10400 17” TRIFECTA PAD 400 Grit Used for burnishing and restoration under 17” burnishers
SSP.17.10800 17” TRIFECTA PAD 800 Grit Used for burnishing and restoration under 17” burnishers
SSP.17.11500 17” TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 17” burnishers
SSP.17.13000 17” TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 17” burnishers
ITEM DESCRIPTION IDEAL USE
SSP.20.20100 20” TRIFECTA PAD 100 Grit Used for burnishing and restoration under 20” burnishers
SSP.20.20400 20” TRIFECTA PAD 400 Grit Used for burnishing and restoration under 20” burnishers
SSP.20.20800 20” TRIFECTA PAD 800 Grit Used for burnishing and restoration under 20” burnishers
SSP.20.21500 20” TRIFECTA PAD 1500 Grit Used for burnishing and restoration under 20” burnishers
SSP.20.23000 20” TRIFECTA PAD 3000 Grit Used for burnishing and restoration under 20” burnishers
®
Sold 2 per box27"
24"
20"
17"
PRODUCT CATALOG © 2017 SASECompany, Inc.
Page 31
ITEM DESCRIPTION IDEAL USE
SSP.27.005 27" White Burnisher Pad (5 per pack)
Used to clean floor between polishing steps and after applying SASE Protect Plus or polish guard under 27" burnishers
ITEM DESCRIPTION
SAS.00013 13" Sapphire Pad
SAS.00014 14" Sapphire Pad
SAS.00016 16" Sapphire Pad
SAS.00017 17" Sapphire Pad
SAS.00020 20" Sapphire Pad
ITEM DESCRIPTION IDEAL USE
SSP.27HEAT 27" SureShine Pad (5 per pack)
Used on floors where a matte finish is desired. For use on SASE 27" high speed burnisher
Sold 5 per box
Sold 5 per box
Sold 5 per box
SAPPHIRE PADS
These pads are for daily cleaning on polished concrete floors.
SURE SHINE HEAT PADS
BURNISHER PAD
27"
27"