+ All Categories
Transcript
Page 1: Prefabricated Palmer-Bowlus and Parshall Flumespt.mjk.com/fileadmin/downloadcenter/3._Flow_meters/... · General The Parshall flumes are made of fiberglass-reinforced polyester resins

MJK North America, Inc.37 Sherwood Terrace, #126Lake Bluff, IL 60044Tel: 847-482-8655 877 MJK LINKFax: [email protected]

Data Sheet

� Asourproductsarecontinuouslyimproved,wereservetheright tomakeanychangeinthestatedspecificationsanddimensionswithoutpriornotice.US3.8Flumes0608

3.8

Prefabricated Palmer-Bowlus and Parshall Flumes

Maintenance free, accurate and economical.

Page 2: Prefabricated Palmer-Bowlus and Parshall Flumespt.mjk.com/fileadmin/downloadcenter/3._Flow_meters/... · General The Parshall flumes are made of fiberglass-reinforced polyester resins

MJK North America, Inc.37 Sherwood Terrace, #126Lake Bluff, IL 60044Tel: 847-482-8655 877 MJK LINKFax: [email protected]

Data Sheet

Palmer-Bowlus Flumes

General ThePalmer-Bowlustrapezoidalthroatdesignensuresahighvelocityatcriticalflowlevels,translatingintominimalflowrestric-tion,lowenergylossandbettermeasure-mentaccuraciesatbothlowflowandpeakcapacity.Thesmoothgelcoatedsurfacesminimizefrictionandpreventsolidsbuild-up.Aone-piecemoldedconstructionmakesinstallationquick,easyandcosteffective.Allcomponentsaremadewithcorrosionresistantmaterialsforwiderangesofap-plicationtypes.ManufacturedtoconformtoASTMandUSDepartmentoftheInteriorstandards.

Specifications

Dimensions

Size: CFS: MGD: GPM: Max.head: Shippingweight: ThroatSize

Approximately @approx. Permanent Insert Exit/cutback

maximumdischarge max.discharge

4” 0.�� 0.07 54 3.0” �0lbs 7lbs 5lbs 6” 0.30 0.�9 �3� 4.�” �5lbs �0lbs 8lbs 8” 0.69 0.45 3�0 6.0” �0lbs �5lbs ��lbs �0” �.�� 0.7� 50� 7.�” �5lbs �0lbs �7lbs ��” �.67 �.08 75� 8.4” 33lbs �5lbs �0lbs �5” 3.09 �.99 �,385 �0.8” 50lbs 33lbs 30lbs �8” 4.6� �.98 �,07� ��.6” 75lbs 50lbs 45lbs ��” 7.04 4.55 3,�6� �5.0” ��5lbs 75lbs 65lbs �4” 9.47 6.�0 4,�48 �6.8” �50lbs 90lbs 80lbs �7” �3.09 8.44 5,873 �9.�” - ��0lbs �00lbs 30” �6.5� �0.66 7,4�3 ��.0” - �30lbs ��5lbs 36” �9.97 �9.37 �3,45� �7.0” - �75lbs �60lbs 4�” 43.77 �8.�9 �9,645 3�.4” - �00lbs �85lbs

Permanent Exit/cutback Insert

D: D/2: L1: L2: H: R: Y: C: T:

4” �” �7” �0” 6” �/3” ��3/�6” 45/8” 3/�6”

6” 3” �5” �4” 8” �” ��3/�6” 65/8” 3/�6”

8” 4” 33” �8” �0” ��/3” 3�3/�6” 85/8” 3/�6”

�0” 5” 4�” ��” ��” ��/3” 4�3/�6” �05/8” 3/�6”

��” 6” 49” �6” �4” �” 5�3/�6” ��5/8” 3/�6”

�5” 7�/�” 6�” 3�” �7” ��/�” 75/�6” �55/8” 3/�6”

�8” 9” 73” 38” �0” 3” 8�3/�6” �85/8” 3/�6”

��” �0�/�” 85” 44” �3” 3�/�” �05/�6” ��5/8” 3/�6”

�4” ��” 97” 50” �6” 4” ���3/�6” �45/8” 3/�6”

�7” �3�/�” �09” 56” �9” 4�/�” �35/�6” �75/8” 3/�6”

30” �5” ���” 6�” 3�” 5” �4�3/�6” 305/8” 3/�6”

36” �8” �45” 74” 38” 6” �7�3/�6” 365/8” 3/�6”

4�” ��” �69” 86” 44” 7” �0�3/�6” 4�5/8” 3/�6”

Flow directionFlow direction

Flow direction

Page 3: Prefabricated Palmer-Bowlus and Parshall Flumespt.mjk.com/fileadmin/downloadcenter/3._Flow_meters/... · General The Parshall flumes are made of fiberglass-reinforced polyester resins

MJK North America, Inc.37 Sherwood Terrace, #126Lake Bluff, IL 60044Tel: 847-482-8655 877 MJK LINKFax: [email protected]

Data Sheet

3

Parshall Flumes

Size: CFS: MGD: GPM: Max.head: Shippingweight:Dimension“D”

Approximately @approx. maximumdischarge max.discharge

�” 0.36 0.�3 �6� 8” 35lbs 3” �.86 �.�0 834 �8” 45lbs 6” 3.9� �.5� �,754 �8” 65lbs 9” 8.87 5.73 3,980 �4” 85lbs ��” �6.�3 �0.40 7,��5 30” �75lbs �8” �4.60 �5.89 ��,040 30” �85lbs �4” 33.�� ��.39 �4,855 30” �40lbs 36” 50.39 3�.57 ��,6�9 30” 3�0lbs 48” 67.93 43.88 30,473 30” 4�0lbs

General TheParshallflumesaremadeoffiberglass-reinforcedpolyesterresinslayedupoverwhiteisophthallicgel-coat.Theyhavearigid�-piececonstructionandareespeciallywellsuitedformeasuringliquidscontainingso-lids.ManufacturedtoconformtoASTMandUSDepartmentoftheInteriorstandards.Thesmoothsurfaceandinternalflowlineshelpreducemeasuringerrorsthatoccurewiththeaccumulationofdebris.TheintegralreinforcingribsandextrudedFRPangles,boltedtothetopflanges,aidinmaintainingdimensionalintegrityduringshipmentandinstallation.Fiberglassanchorclipsareprovidedtohelpsecuretheunitinconcrete.

Specifications

W: A: 2/3A: B: C: D: E: F: P: K: N: R: T:

�” �’-45/�6” �07/8” �’-4” 55/�6” 8�3/3�” 9” 4�/�” �’-6�/�” 7/8” ���/�6” �3/4” 3/�6”

3” �’-63/8” �’-�/4” �’-6” 7” �03/�6” �’-0” 6” 3’-0” �” ��/4” �” 3/�6” 6” �’-7/�6” �’-45/�6” �’-0” �’-3�/�” �’-35/8” �’-0” �’-0” 5’-0” 3“ 4�/�” ��/�” 3/�6” 9” �’-�05/8” �’-���/8” �’-�0” �’-3” �’-�05/8” �’-6” �’-0” 5’-4” 3“ 4�/�” ��/�” 3/�6” ��” 4’-6” 3’-0” 4’-47/8” �’-0” �’-9�/4” 3’-0” �‘-0“ 9’-47/8” 3” 9“ ��/�” �/4” �8” 4’-9” 3’-�” 4’-77/8” �’-6” 3’-43/8” 3’-0” �‘-0“ 9’-77/8” 3” 9“ ��/�” �/4” �4” 5’-0” 3’-4” 4’-�07/8” 3’-0” 3’-���/�” 3’-0” �‘-0“ 9’-�07/8” 3” 9“ ��/�” �/4” 36” 5’-6” 3’-8” 5’-43/4” 4’-0” 5’-�7/8” 3’-0” �‘-0“ �0’-43/4” 3” 9“ ��/�” 5/�6” 48” 6’-0” 4‘-0” 5’-�05/8” 5’-0” 6’-4�/4” 3’-0” �‘-0“ �0’-45/8” 3” 9“ ��/�” 3/8”

Dimensions

Flow direction

Can be delivered with optional stilling well on either left or right hand side. Contact MJK for further

information.

Page 4: Prefabricated Palmer-Bowlus and Parshall Flumespt.mjk.com/fileadmin/downloadcenter/3._Flow_meters/... · General The Parshall flumes are made of fiberglass-reinforced polyester resins

MJK North America, Inc.37 Sherwood Terrace, #126Lake Bluff, IL 60044Tel: 847-482-8655 877 MJK LINKFax: [email protected]

Data Sheet

4

Palmer-Bowlus and Parshall Flumes

Palmer-Bowlusprefabricatedflumes: Parshallprefabricatedflumes:Dimension: Permanent: Insert: Exit/cutback: Standardincludesstaffgauge:

�” - - - �79000 3” - - - �7900� 4” �79�00 �79�00 �79300 - 6” �79�0� �79�0� �7930� �7900� 8” �79�0� �79�0� �7930� - 9” - - - �79003 �0” �79�03 �79�03 �79303 - ��” �79�04 �79�04 �79304 �79004 �5” �79�05 �79�05 �79305 - �8” �79�06 �79�06 �79306 �79005 ��” �79�07 �79�07 �79307 - �4” �79�08 �79�08 �79308 �79006 �7” - �79�09 �79309 - 30” - �79��0 �793�0 - 36” - �79��� �793�� - 4�” - �79��� �793�� -

Order numbers

Options(Consult MJK)

•Embeddedstaffgaugewithcalibrationunitsin0.�’,0.0�’&¼”increments.

•Attachedstillingwellsin��”,�0”,8”,and6”I.D.canbesupplied.

•Shuttle®UltrasonicLevelMeterwithsup-portbracketforShuttle®LevelTransmitter.Seeseparatedatasheet.

•�½”widestandardendflangesinfiberglass.

•Bulkheadsandpipestubscanbebuiltonformanyapplications.

•AdditionalflumestylessuchasHandtrape-zoidalcanbebuilttospecifications.

•Allflumesarebuilttoorder-pleaseallow3weeksfordelivery.

Universalbracket(200205)

Standardsensorbracket(200220)

Shortsensorbracket(200219)

Sensorbracketforchannelorflume(��.6in:200230/37.4in:200235)

��.6/37.4in

4.5in

�in

�9.7in

Mounting Brackets

Page 5: Prefabricated Palmer-Bowlus and Parshall Flumespt.mjk.com/fileadmin/downloadcenter/3._Flow_meters/... · General The Parshall flumes are made of fiberglass-reinforced polyester resins

MJK North America, Inc.37 Sherwood Terrace, #126Lake Bluff, IL 60044Tel: 847-482-8655 877 MJK LINKFax: [email protected]

Data Sheet

5

Palmer-Bowlus and Parshall Flumes

TheMJK7�3worksbymeasuringflowinflumesorweirs.TheMJK7�3measuresthedepthofflowintheflumeorweirandcalculatestheflowratebasedonthestan-dardcurvefortheflumeorweirused.Thisistypicallybasedontheequation:

FLOW Q = level x * constant

Theexponent(X)andconstantdependonthetypeofprimarydeviceused.Apre-programmedlistofstandardweirs

How the MJK 713 Open Channel Flowmeter works

andflumesallowseasyselectionoftheequationrequiredfortheflumeorweir,howeveracustomcurvecanbeconfiguredfornon-standardflumesorweirs.

TheMJK7�3iseasilyoperatedwith4functionkeys:FlowKey,TotalizerKey,AlarmKey,andtheSamplerKey.Thefunctionkeysallowsaccesstothevariousparametersshownbelow:

Flow key: •actualflowrate•averageflowrate - overlasthour - today - previousday

Totalizer key:• totalflow - sincestartup - overlasthour - today - previousday - anypreviousdayup

to99daysback

Alarm key:•displayslast9alarmswith

dateandtimestamp - sensorerrors - highandlowflowalarms - highandlowhourlyflows - highandlowflowforday - powerfailure

Sampler key:• totalsamples• totalsamplestoday• totalsamplespreviousday

Page 6: Prefabricated Palmer-Bowlus and Parshall Flumespt.mjk.com/fileadmin/downloadcenter/3._Flow_meters/... · General The Parshall flumes are made of fiberglass-reinforced polyester resins

Denmark [email protected]+4545560656

The [email protected]+3��5�67��7�

North America [email protected]+�84748�8655

[email protected]+4769�06070

[email protected]+46533�7750

[email protected]+6�397588533

Dis

trib

uted

by:

MJK

offi

ces:

Data Sheet Palmer-Bowlus and Parshall Flumes

Formeasurementaccuracyuseflumesizestomatchactualflows.Sizingtonominalpipesizeisnotalwayscorrect.Optimumflowreadingsareob-tainedbyselectingaflumesizethathasflowratesbetweenmaximumandminimumdischargerates.

Typicallyoversizedflumesreducetheac-curacyoftheflowmeasurement.Whenthepipelinesizeislargerthantheflume,theapproachsection,constructedonsitebytheinstaller,onthepermanentflumemustsmooththeflowbeforeitreachesthepointofmeasurement.

GeneralFlumesshouldnotbeplacedatrightanglestoflowingstreamssuchasinturnoutsun-lesstheflowiseffectivelystraightenedanduniformlyredistributedbeforeitenterstheflume.Surgesandwavesofanyappreciablesizeshouldbeeliminatedandtheflowlinesshouldbeessentiallyparalleltotheflume’scenterline.Also,theflowattheflume’sen-tranceshouldbefreeofturbulence(visiblesurfaceboils).

AllflumeshaveextrudedFRPanglesthatareboltedontothetopflangestomaintaindimensionalintegrityduringshipmentandinstallation.AlthoughtheseanglescanberemovedAFTERtheinstallationprocessiscomplete,MJKrecommendsleavingtheanglesinplacetomaintaintheflume’sdimensionalintegrityshouldthegroutsink.

Palmer-Bowlus flumes grouted in placePermanenttypePalmer-Bowlusflumesaretypicallygroutedintoplacebetweentwosectionsofpipehavingthesamediameterastheflume.Inexistingpipelines,asectionofpipeequaltothelengthoftheflumeisremovedandreplacedwiththeflume.

Wheninstalingtheflume,theinvert(insidebottommostpoint)shouldbeusedasareference.Theinvertoftheflumemustbelevelinbothfronttobackandsidetosidedirections.Theparallelsidewallsmustbeplumb.Theflumeshouldbesetonasolidfoundationtopreventsettlingorheaving.FRPanchorclipsareprovidedforattachingwiretotheflumetopreventtheflumefromfloatingorshiftingduringstagedpouringofflowablegrout.

Internalbracingmustbeprovidedontheperpendicularsidewallsoftheflumebytheinstallertopreventanyunduestressordeformationduringbackfillingwithflowablegroutorothermaterials.Flowablegroutbackfillshouldbestagefilledpouredin�to6”deepincrements(lifts)withminimaluseofavibrator.ThefirstliftshouldbeSLOWLYpouredononesidesothatthegroutwillflowundertheflumetotheotherside,therebyhelpingtoeliminateanyvoidareasundertheraisedtrapezoidalfloorsection.Eachliftmustbeallowedtosetupbeforenextstageispoured.

Parshall flumes grouted in placeWheninstallingParshallflumes,thecrest(flooroftheconvergingsection)shouldbeusedasareference.

Thecrestoftheflumemustbelevelinbothfronttobackandsidetosidedirections.

Flumesshouldbesetonasolidfoundationtopreventsettlingorheaving.FRPanchorclipsareprovidedforattachingwirestotheflume.Thisaidsinpreventingtheflumefromfloatingorshiftingduringstagepouringofflowablegrout.

Wheninstallingflumes,internalbracingshouldbeprovidedbytheinstaller.

Thishelpstopreventanyunduestressordeformationduringbackfillingwithflowablegroutorothermaterials.Flowablegroutbackfillshouldbe“stage-poured”inappro-ximately6”deepincrements(“lifts”).Thefirst6”“lift”shouldbepouredSLOWLYononeside,Thisallowsthegrouttoflowundertheflumetotheoppositeside,bythathelpingtoeliminateanyvoidareasunderthefloorsection.Each“lift”mustbeallowedtosetupbeforethenext“lift”ispoured.

Selecting a flume

Installation requirements


Top Related