Projects &
Solutions SHERIDAN MARINEBy River, By Road, By Mail...
Order the Solutions
01491 652 085
Freeman Sea Cock Sea Cock CapThe Sea Cock Cap prevents water entering the boat but allows access to the filter. Should water in the sea cock freeze the cap top may ‘bulge’ slightly or even crack. If the cap has bulged into a ‘dome’ or has signs of wear, it should be replaced.
New Sea Cock Cap GV070
Cap WasherReplace the Cork Washer in the cap regularly, this helps create a watertight seal when the sea cock cap is tightened.
Sea Cock FiltersSea Cock Filters remove unwanted debris from the river water that is used in the engine cooling system. Cleaning regularly is essential and if worn or damaged, a new filter should be installed.
Freeman Sea Cock
Filters
Cork Washer GV071
Most common Freeman Sea Cock setup.
Domed cap
due to freezing.
Projects &
Solutions SHERIDAN MARINEBy River, By Road, By Mail...
Order the Solutions
01491 652 085
Freeman Sea CockThe Gate ValveThis should be capable of stopping water flow when required. Common wear points are the handle and the shaft. Once the Gate Valve fails to work consider replacing immediately.
AccessoriesAdditional useful equipment for the Freeman Sea Cock.
Mastic Tape
Water StrainerCheck that the hull Water Strainer is clear. Young Mussels can enter, grow & become stuck, blocking water flow. This is the first line of engine cooling water filtration so it is good practice to keep this clear.
Bilge Cleaner
Bilge Paint
New Water
Scoops
© Sheridan Marine 2016. All rights reserved. E&OE. This is a project guidance sheet and not a ‘How-to’ fact book. It is presumed that all work is carried out safely following the product man-ufacturers instructions. Each project may differ so may need further discussions and guidance.
Sea Cock Gate Valve
New Water Strainers
