NORSOK standard M650 annex D edilion 4, september 2011
~ .,.,OIIcJelsRL e QTR QTR. No.:
M650-03/A CUI\li'ANY
~ WITH QUAUTV MANAGE:\1ENT
Qualification Test Record SVSTEM CEJI.T I FIED UV BV Rev. No.: o =ISO 9001 12008"
CERT NR. ll0827 NORSOK M-650 ed 4 P age#: l of l
Manufacturer COPROSIDER SRL
n a me l address l VIA CASSOLI7, 29122 PIACENZA - ITALY
Web page: www.coorosider.it
Reference standard NORSOK M -650 ed 4
Mater ia! designation Wrought fittings ASTM A815 UNS 532760
and M DS No.: NORSOK M630 ed. 6 MDS 053 rev. 5
Manufacturing Route# Manufactuting summary # Rev#
summa ry doc. No.: 01 MAS M650-02-01 o 02 MAS M650-02-02 o 03 MAS M650-02-03 o 04 MAS M650-02-04 o
Product s and Route # Description
manufacturing 01 Co/d formed seamless LR & SR elbows process(es): 02 Co/d formed seamless equa/ an d reducing tee
03 Co/d formed seamless eone and ecc reducers 04 Co/d formed elliptical caps 2:1
M andatory conditions Furnace F6 or F20 (located in IBF fittings division) to be used forali routes, furnace details included in
and sub-contractors: the heat t reatment procedure PR 462 rev. 8
Soaking ti me is measured on the basis of mobile thermocouples
Any revision of heat treatment procedure, raw materia! suppliers an d sketches for testes shall be evaluated
by the qualifying company whom accepted this QTR for evaluation on possible new testing
Other information : Externa//aborotories
SI DER TEST accredit ISO 17025:2005 nr0864
LPM Snc, veirified according to ISO 17025:2005 principles (Approved vendor list)
For sampling sketches for regular production and qualification testing see attached sampling test report'
MAS sequence
Audit for verification of satisfactory heat treatment procedure No. PR 462 rev. 8 of Furnace F6 & F20
completed in aprii 2013 by qualifying company DNV
Sub contracted activities : Pickling and passivation in IBF Fittings divisions
Tested and Qualified Thickness Product s and Test e d Qualified
manufacturing Test record No. thickness thickness Prototype- Test pieces description
process(es): m m m m
Route 01 M650-03-0l- l 14,00 17,50 go• LR Elbows 4" SCH. 160 -- -- -- - - - -- - --Route 02 M650-03-02-l 14,00 17,50 Equal 4" SCH. 160 -- - -- -Route 03 M 650-03-03-l 14,00 17,50 Ecc. Red 4" x 3" SCH. 160 X 160
1- --- -- -- -- - --Route 04 M650-03-04-l 15~ 18,75 Eli Cap 4 " SCH~ --- ----- --- - -- -- -
Qualification l Acceptance signatures Manufacturer: Prepared by l Date: Checked by l Date:
D.MARASCHIN 2210112014 A.GROPPI 22/01/2014
The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of
NORSOK M-650 for supply of the above list ed products an d mat erials.
Th is acceptance do es not exempt any purchaser f rom his responsibility to ensure that this qualif icat ion is vali d
f,qr his products within the essential variables of NORSOK M-650 l Qualified l A«epted by l'fii ~~ ~~ddc~)c Signature l Date:
l L
~ ~
BE~ l i ( l -e. o
~w. v "' ' v v
18
~ \
. . document rev1s1ons are 1dent1fied by red color QTR 532760 COLO SEAMLESS
-
NORSOK standard M650 annex D edition 4, september 2011
~ C~OIIdelsRL QTR. No.: QTR
MGS0-03/B CUI\lPA.I'ò'l' \VITH QUALI TV MANA<ìE~tENT
SVSTEM CERTIFIED UV BV =ISO 9001 :2008=
CERT NR. 220827
Qualification Test Record NORSOK M-650 ed 4
Rev. No.: l
Page #: l of l
Manufacturer name l address l Web page: Reference standard
Mater ia! designation and MDS No.:
Manufacturing summary doc. No.:
Products and manufacturing process(es):
Mandatory conditions and sub-contractors:
Other information:
Products and manufacturing
process(es):
Route 06
Manufacturer:
COPROSIDER SRL VIA CASSOLI 7, 29122 PIACENZA - ITALY www .coprosider. i t NORSOK M-650 ed 4
Wrought fittings ASTM A815 UNS 532760 NORSOK M630 ed. 6 MDS 053 rev. 5
Route#
05
06
07
08
Route #
05
06
07
08
Manufactu.ting summary # MAS M650-03-05 MAS M650-03-06 MAS M650-03-07 MAS M650-03-08 Description
Ho t formed seamless LR & SR elbows Ho t jormed seamless equa/ an d reducing tee Hotformed seamless eone and ecc reducers Ho t jormed elliptical caps 2:1
Rev# o o o o
Furnace F6 or F20 (located in IBF f i ttings division) to be used for ali routes, furnace details included in
the heat treatment procedure PR 462 rev. 8
Soaking ti me is measured on the basis of mobile thermocouples
Any revision of heat t reatment procedure, raw materia! suppliers an d sketches for testes shall be evaluated
by the qualifying company whom accepted this QTR for evaluation on possible new testing
Externallabaratories
SIDER TEST accredit ISO 17025:2005 nr 0864
LPM Snc, accredit ISO 1702S:2005 nr 1598
Far sampling sketches for regular production and qualification testing see attached sampling test repor1
MAS sequence
Audi! for verification of satisfactory heat treatment procedure No. PR 462 rev. 8 of Furnace F6 & F20
completed in aprii 2013 by qualifying company DNV
Sub controcted activities: Pickling and passivation in IBF Fittings divisions
Test record No.
M650-03-06-1
Tested and Qualified Thickness Test ed
thickness m m
26,00
Qualified thickness
m m
32,50
Qualification l Acceptance signatures Prepared by l Date: Checked by l Date:
M.BENELLI 2411012016 A.GROPPI
Prototype- Test pieces description
Equal 6" SCH. XXS
24110/2016 The manufacturer and this QTR are evaluated and found to be in compliance with the requirements of
NORSOK M-650 for supply of the above listed products an d materials. This acceptance does not exempt any purchaser f rom his responsibility to ensure that thli.ruJ.alifica~u;..~
for his products within t he essential variables of NORSOK M-pSo ~ ~<'\.
document revis ions are identified by red color QTR S32760 HOT SEAMLESS REV 1
-
NORSOK standard M650 annex D edition 4, september 2011
QTR. No.: QTR
M650-03/C CU~trAN~
WITH Q UAL.ITV MANA<òE:-tENT SVSTEM CERTIFIED UV BV
= ISO 9001:2008= CERT N R. Zl08l7
Qualification Test Record
NORSOK M-650 ed 4
Rev. No. : l
P age#: l of l
Manufacturer name l address l Web page:
Reference standard
Materia! designat ion
and MDS No.:
Manufacturing summary doc. No.:
Products and
manufacturing process(es):
COPROSIDER SRL VIA CASSOll7, 29122 PIACENZA - ITALY
www.coprosider.it NORSOK M -650 ed 4
Wrought fittings ASTM A815 UNS 532760
NORSOK M630 ed. 6 MDS 053 rev. 5
Route #
09
10
11
Route #
09
10
11
Manufactuting summary # MAS M650-03-09 MAS M650-03-10 MAS M650-03-11
Description
Co/d formed we/ded LR & SR elbows Co/d formed welded equa/ and reducing tee Co/d formed welded eone and ecc reducers
Rev #
o o o
Mandatory conditions Furnace F6 or F20 (located in IBF fittings division) to be used forali routes, furnace details included in and sub-cont ractors: the heat treatment procedure PR 462 rev. 8
Other information:
Products and manufacturing
process(es):
Route 09
Route 10
Route 11
Manufacturer:
Soaking time is measured on t he basis of mobile thermocouples Any revision of heat treatment procedure, raw materia! suppliers and sketches for testes shall be evaluated by the qualifying company whom accepted this QTR for evaluation o n possible new testing
Externolloborotories
SI DER TEST accredit ISO 17025:2005 nr 0864
LPM Snc, accredit ISO 17025:2005 nr 1598
Far sampling sketches far regular production and qualification testing see attached sampling test re pori
MAS sequence
Audit far verification of satisfactory heat treatment procedure No. PR 462 rev. 8 of Furnace F6 & F20
completed in april2013 by qualifying com pany DNV
Sub contracted activities : Pickling and passivation in IBF Fittings divisions
Tested and Qualified Thickness Test ed Qualified
Test record No. thickness thickness m m m m
M650-03-09-l 13,00 16,25 --
M650-03-10-l 13,00 16,25 -
M650-03-11-l 13,00 16,25
Qualification l Acceptance signatures Prepared by l Date: Checked by l Date:
M.BENELll 2411012016 A.GROPPI
Prototype - Test pieces descr iption
90° LR Elbow 8" WTh. 13,00 mm
Red Tee 8" x 4" WTh. 13,00 mm
Ecc. Red 8" x 6" WTh. 13,00 mm
24110/2016 The manufacturer and t his QTR are evaluated and found to be in compliance with the requirements of
NORSOK M-650 for supply of the above listed products an d materials. ~ This acceptance does not exempt any purchaser from his responsibility to ensure that this qualification is va l id
for his products within the essentia l variables of NORSOK M -650 ;;.auA~0 Qualified j Accepted by (company nome l address): Signature l Date: "- ~~,t? s~~~
i~64 ~l o o ~ v·c\41'
2 4 OCT Z01 "7"'~ ~... a 9f 32-,27
document revisions are identified by red color QTR S32760 COLO WELbED REV 1
NORSOK standard M650 annex D edition 4, september 2011
~ C~OiidelsRL QTR. No. : QTR
M650-03/D CUI\li'ANY
WITII QUALITV MMIAGE:'VIENT SVSTEM CERTIFJF.D UV BV
=ISO 9001 12008= CERT NR. 220827
Qualification Test Record
NORSOK M-650 ed 4
Rev. No.: l
P age#: l of l
Manufacturer n a me l address l Web page: Reference standard
Materia! designation and MDS No.:
Manufacturing summary doc. No.:
Products and manufacturing process(es):
Mandatory conditions
and sub-contractors:
Other information:
Products and manufacturing
process(es):
-Route 13 --
--
COPROSIDER SRL VIA CASSOLI 7, 29122 PIACENZA -ITALY www.coprosider.it NORSOK M-650 ed 4
Wrought fittings ASTM A815 UNS 532760 NORSOK M630 ed. 6 MDS 053 rev. 5
Route #
12
13
Manufactuting summary # MAS M650-03-12 MAS M650-03-13
14 MAS M650-03-14
Route #
12
13
14
Description Hot formed welded LR & SR elbows
Ho t formed welded equa/ and reducing tee
Ha t formed welded eone and ecc reducers
Rev #
o
Furnace F6 or F20 (located in IBF fittings division) to be used fora li routes, furnace details included in
the heat treatment procedure PR 462 rev. 8
Soaking ti me is measured o n the basis of mobile thermocouples
Any revision of heat treatment procedure, raw materia l suppliers and sketches for testes shall be evaluated
by the qualifying company whom accepted this QTR for eva luation on possible new testing
Externolloboratories
SIDER TEST accredit ISO 17025:2005 nr 0864
LPM Snc, accredit ISO 17025:2005 nr 1598
For sampling sketches for regular production and qualification testing see attached sampling test repon
MAS sequence
Audit for verification of satisfactory heat treatment procedure No. PR 462 rev. 8 of Furnace F6 & F20
completed in aprii 2013 by qualifying company DNV
Sub contracted activities: Pickling and passivatian in IBF Fittings divisions
Tested and Qualified Thickness Test ed Qualified
Test record No. thickness thickness Prototype- Test pieces description m m m m
M650-03-13-l 24,00 32,50 Equal tee 8" WTh. 24,00 mm
-- - -
--
Qualification l Acceptance signatures Manufacturer: Prepared by l Date: Checked by l Date:
M.BENELLI 2411012016 A.GROPPI 2411012016 The manufacturer and this QTR are evaluated and found to be in compliance with the requireme~ts of
NORSOK M-650 for supply of the above listed products an d materials. This acceptance does not exempt any purchaser from his responsibility to ensure that t his qualification is valid
for his products within the essential variables of NORSOK M-650 / ~~
document revisions are identified by red color QTR S32760 HOT WELDED REV 1