Reed Gun Set-Up
Model No. SOVA-VO7
Hot Gun Set-Up for gunning side walls in Induction Furnaces
Refractory Gunite Hose
1 ½” Refractory Gunite Hose 50 ft length, with male 1
½” coupling on one end and female 1 ½” coupling on
other end. Female end has a 1 ½” wing nut.
Nozzle Assembly Set-Up
1” Water Body, Water Ring, 1” Blue Washer, 1”
Slide Washer, 1” Flex tip
Nozzle Assembly (1 ½”)
1 ½” Double Bobble, 1 ½” Water Body, 1 ½”
Water Ring, 1 ½” Rubber Washer (blue), 1 ½”
Slide Washer, DB Retainer Bushing.
Rubber Pad and Parts Assembly
Rubber Wear Pad, Cover Plate for Feed Bowl
(chrome), Steel Back-up Plate for Pad (black), Steel
Felt Retainer Band Weldment, Blue Tip Felt Seal
Rock Shear Plate
Cover Plate for Feed Bowl (chrome), Steel Felt
Retainer Band Weldment, Rock Shear Plate (square)
Gooseneck Assembly
Steel Back-up Plate for Pad, 4 screws,
Gooseneck, Gooseneck Liner (blue)
18 Pocket Bowl
The 18 Pocket Bowl is recommended for use
when hot-gunning the induction furnaces.
16 Pocket Bowl
The 16 Pocket Bowl is recommended for larger
scale gunning installations, that is, if you are
going to gun more than 1-2 pallets.
2” Primary Air/Water Separator
Assembly
2” piping with 2” 90° elbows on each end, ½” Air
Separator, ½” Oiler
Hot Gunning Assembly
Lance for Hot Gunning side walls of induction furnaces.
The material piping is made out of aluminum for ease
of handling. The length of water and material piping
can vary depending on size of furnace.
Water Inlet
Connection
Material Feed
from 1 ½” Hose
Material Discharge
Opening
End welded
closed for
wear abrasion
Water Ring Water Piping
(length can vary)
Material Piping Aluminum
(length can vary) Approx 8 ft length
Reed Gun Kit (Gun is fully serviced, ready to work)
Part
Number Description QTY
Unit
Price Cost
SOVA Reed Gun Complete-16 Pkt-1 ½” Feed-
10907-1 Screen; Air Drive 1 $10,980.00
10314 2” Air-Water Air Filter Assy 1 Installed $855.00
BB 1 ½” 50’ Refractory Material Hose, cpld 2 $955.00 $1,910.00
71500 Double Bubble Nozzle Assy Complete 1 $416.00 $416.00
20089P
/
20098N
Cover Plate w/ Hex Nut 1 $144.00 included
Merchandise Subtotal $14,161.00
Applicable Factory Freight Surcharge
(inbound) $708.05
Prepaid Freight (To Buyer) FOB Bham
Subtotal $14,869.55
Applicable Sales Taxes Buyer
Responsible
Total $14,869.55
Spare Parts/Wear Parts
Part
Number Description QTY
Unit
Price Cost
20090M Rubber Wear Pad 12 $23.32 $279.84
10959B Gooseneck Liner 2 $59.40 $118.80
20158B Felt Seal 2 $8.80 $17.60
71501B 1 ½” Double Bubble Nozzle Tip 2 $58.30 $116.60
71503 1 ½” Water Ring-12 hole 4 $23.10 $92.40
71504 1 ½” Blue Rubber Backup Washer 2 $8.14 $16.28
71505 1 ½” Steel Slider Washer 2 $8.14 $16.28
71506 ½” Complete Needle Valve Set 1 $81.40 $81.40
Merchandise Subtotal $739.20
Applicable Factory Freight Surcharge
(inbound) $36.96
Prepaid Freight (To Buyer) FOB Bham
Subtotal $776.16
Applicable Sales Taxes Buyer
Responsible
Total $776.16
Spare Parts
Part
Number Description QTY
Unit
Price Cost
20089 16 Pocket Feed Bowl ( gunning 1-2
pallets) 1 $971.00 $971.00
20189 18 Pocket feed Bowl (hot-gunning Ind.
Furnaces) 1 $980.00 $980.00
71000 1” Nozzle Assy Complete 1 $349.00 $349.00
71001 1” Flex Nozzle Tip 4 $17.00 $68.00
71003 1” Aluminum Water Ring-8 hole 4 $23.00 $92.00
71004 1” Blue Rubber Backup Washer 2 $8.14 $16.28
71005 1” Steel Slider Washer 2 $8.14 $16.28
90_ _ _ 1 ½” Assorted Pipe Fittings for Nozzle Tip 2 $28.50 $57.00
71008 1 ½” to 1” Thread Adaptor to Nozzle 2 $195.80 $391.60
Merchandise Subtotal $2,941.16
Applicable Factory Freight Surcharge
(inbound) $147.06
Prepaid Freight (To Buyer) FOB Bham
Subtotal $3,088.22
Applicable Sales Taxes Buyer
Responsible
Total $3,088.22