Reed Gun Set-Up

Model No. SOVA-VO7

Hot Gun Set-Up for gunning side walls in Induction Furnaces

Refractory Gunite Hose

1 ½” Refractory Gunite Hose 50 ft length, with male 1

½” coupling on one end and female 1 ½” coupling on

other end. Female end has a 1 ½” wing nut.

Nozzle Assembly Set-Up

1” Water Body, Water Ring, 1” Blue Washer, 1”

Slide Washer, 1” Flex tip

Nozzle Assembly (1 ½”)

1 ½” Double Bobble, 1 ½” Water Body, 1 ½”

Water Ring, 1 ½” Rubber Washer (blue), 1 ½”

Slide Washer, DB Retainer Bushing.

Rubber Pad and Parts Assembly

Rubber Wear Pad, Cover Plate for Feed Bowl

(chrome), Steel Back-up Plate for Pad (black), Steel

Felt Retainer Band Weldment, Blue Tip Felt Seal

Rock Shear Plate

Cover Plate for Feed Bowl (chrome), Steel Felt

Retainer Band Weldment, Rock Shear Plate (square)

Gooseneck Assembly

Steel Back-up Plate for Pad, 4 screws,

Gooseneck, Gooseneck Liner (blue)

18 Pocket Bowl

The 18 Pocket Bowl is recommended for use

when hot-gunning the induction furnaces.

16 Pocket Bowl

The 16 Pocket Bowl is recommended for larger

scale gunning installations, that is, if you are

going to gun more than 1-2 pallets.

2” Primary Air/Water Separator

Assembly

2” piping with 2” 90° elbows on each end, ½” Air

Separator, ½” Oiler

Hot Gunning Assembly

Lance for Hot Gunning side walls of induction furnaces.

The material piping is made out of aluminum for ease

of handling. The length of water and material piping

can vary depending on size of furnace.

Water Inlet

Connection

Material Feed

from 1 ½” Hose

Material Discharge

Opening

End welded

closed for

wear abrasion

Water Ring Water Piping

(length can vary)

Material Piping Aluminum

(length can vary) Approx 8 ft length

Reed Gun Kit (Gun is fully serviced, ready to work)

Part

Number Description QTY

Unit

Price Cost

SOVA Reed Gun Complete-16 Pkt-1 ½” Feed-

10907-1 Screen; Air Drive 1 $10,980.00

10314 2” Air-Water Air Filter Assy 1 Installed $855.00

BB 1 ½” 50’ Refractory Material Hose, cpld 2 $955.00 $1,910.00

71500 Double Bubble Nozzle Assy Complete 1 $416.00 $416.00

20089P

/

20098N

Cover Plate w/ Hex Nut 1 $144.00 included

Merchandise Subtotal $14,161.00

Applicable Factory Freight Surcharge

(inbound) $708.05

Prepaid Freight (To Buyer) FOB Bham

Subtotal $14,869.55

Applicable Sales Taxes Buyer

Responsible

Total $14,869.55

Spare Parts/Wear Parts

Part

Number Description QTY

Unit

Price Cost

20090M Rubber Wear Pad 12 $23.32 $279.84

10959B Gooseneck Liner 2 $59.40 $118.80

20158B Felt Seal 2 $8.80 $17.60

71501B 1 ½” Double Bubble Nozzle Tip 2 $58.30 $116.60

71503 1 ½” Water Ring-12 hole 4 $23.10 $92.40

71504 1 ½” Blue Rubber Backup Washer 2 $8.14 $16.28

71505 1 ½” Steel Slider Washer 2 $8.14 $16.28

71506 ½” Complete Needle Valve Set 1 $81.40 $81.40

Merchandise Subtotal $739.20

Applicable Factory Freight Surcharge

(inbound) $36.96

Prepaid Freight (To Buyer) FOB Bham

Subtotal $776.16

Applicable Sales Taxes Buyer

Responsible

Total $776.16

Spare Parts

Part

Number Description QTY

Unit

Price Cost

20089 16 Pocket Feed Bowl ( gunning 1-2

pallets) 1 $971.00 $971.00

20189 18 Pocket feed Bowl (hot-gunning Ind.

Furnaces) 1 $980.00 $980.00

71000 1” Nozzle Assy Complete 1 $349.00 $349.00

71001 1” Flex Nozzle Tip 4 $17.00 $68.00

71003 1” Aluminum Water Ring-8 hole 4 $23.00 $92.00

71004 1” Blue Rubber Backup Washer 2 $8.14 $16.28

71005 1” Steel Slider Washer 2 $8.14 $16.28

90_ _ _ 1 ½” Assorted Pipe Fittings for Nozzle Tip 2 $28.50 $57.00

71008 1 ½” to 1” Thread Adaptor to Nozzle 2 $195.80 $391.60

Merchandise Subtotal $2,941.16

Applicable Factory Freight Surcharge

(inbound) $147.06

Prepaid Freight (To Buyer) FOB Bham

Subtotal $3,088.22

Applicable Sales Taxes Buyer

Responsible

Total $3,088.22