Number of Facilities: 319
Total Full-Time Employment: 21,499
December 29, 2015
Report Kentucky Facilities
Steel
Introduction and Methodology
The Kentucky industry reports provide a list of facilities (with 10 or more employees) normally associated with Cabinet programs. Most information is taken directly from surveys completed by each facility or from phone or personal contact with the facility. Survey information is collected on an annual basis. Facility name, address, location, product or service, employment and other information may change and often does change between annual surveys. While all attempts are made to capture ongoing changes from data provided by facilities, local economic development contacts, media announcements, and Cabinet programs, no guarantee can be made that changes will be discovered. Also included on these reports, but not counted in the total number of facilities or full-time employment, are new location projects recently announced in Kentucky. The projects are identified by (announced) next to their projected full-time employment.
Disclaimer
The information provided herein by the Kentucky Cabinet for Economic Development is believed to be accurate but is not warranted and is for informational purposes only. While all attempts are made to insure the correctness and accuracy of information in this report and to make corrections and change errors brought to our attention, no representation or guarantee, express or implied, is made as to the accuracy of the information presented. Any information provided in this report is provided without assurances or warranties and should not be relied upon as fact. The Kentucky Cabinet for Economic Development assumes no liability for the accuracy of the information contained in this report.
A & C Sheet Metal
988 Swan StLouisville, KY 40204-1810
502-635-6363
Electrical boxes; plate, ornamental, sheet & structural metal fabricating and installation
Full-time Employment: 8
Contact: Mr. Glenn Arington, Pres
NAICS Codes: 332312, 332322, 332323
(2014)
1977Established:
www.aandcsheetmetal.com
A & L Manufacturing Co Inc
4219 S Brook StreetLouisville, KY 40214-1815
502-366-3037
Miscellaneous and structural metal fabricating including stairs and railings
Full-time Employment: 12
Contact: Ms. Lee Lattis, Pres
NAICS Codes: 332312, 332323, 332999
(2014)
1964Established:
A & S Fabricating Co
265 US Highway 431 NLivermore, KY 42352
270-278-2371
Job shop specializing in large, heavy custom metal fabrications, complete machine shop service including large machining, industrial repairs, machinery builder, sandblast, painting, assembly
Full-time Employment: 25
Contact: Mrs. Karen Whitaker, Pres
NAICS Codes: 332312, 332313, 332710, 333318
(2014)
1969Established:
PO Box 160Livermore, KY 42352-0160
www.asfabco.com
A N Roth Company LLC
749 E Jefferson StLouisville, KY 40202-1030
502-584-8503
Architectural & ornamental sheet metal fabricating; heating & air conditioning duct work, sales and service
Full-time Employment: 10
Contact: Mr. Karl P. Roth Jr., Pres
NAICS Codes: 332322, 332323
(2015)
1866Established:
www.anroth.com
Accurite Machine & Manufacturing Inc
4421 Poplar Level RoadLouisville, KY 40213
502-238-4808
Machinery and equipment; fixtures; gauges
Full-time Employment: 16
Contact: Mr. Paul Blandford, Pres
NAICS Codes: 333514, 333519
(2015)
1992Established:
www.accuritemachine.com
Acramold Inc
1670 Distribution DrCommerce Park WestBurlington, KY 41005-9507
859-525-8811
Reverse engineering, tool, dies and custom molds & plastic injection molded products
Full-time Employment: 8
Contact: Mr. Dallas Trinkle, Pres
NAICS Codes: 326199, 333514
(2014)
1979Established:
www.acramold.com
Adams Magnetic Products Co
509 Assembly DrElizabethtown, KY 42701-1162
270-763-9090
Magnets, magnetic tools & magnet assemblies, flexible and advertising magnetic sheeting
Full-time Employment: 13
Contact: Mr. Tony Hull, GM Admin
NAICS Codes: 332999, 333515
(2014)
2005Established:
www.adamsmagnetic.com
Advanced Drainage Systems Inc
121 Buck Creek Church RdCalhoun, KY 42327
270-733-4324
Corrugated plastic pipes
Full-time Employment: 64
Contact: Mr. Aaron Buck, Plant Mgr
NAICS Codes: 326122, 326199, 332996
(2014)
1977Established:
www.ADS-pipe.com
12/29/2015 Page 1 of 47
Advanced Green Components LLC
4005 Corporate DrWinchester, KY 40391-9680
859-737-6016
Produces forgings and machined rings for tapered roller bearings; produce outer and inner rings for tapered wheel bearings
Full-time Employment: 100
Contact: Ms. Velva Hall, HR Mgr
NAICS Codes: 332111, 339991
(2014)
1997Established:
www.advgreen.com
Aggressive Tool & Die Inc
5 Quality PlBuckner, KY 40010
502-222-5555
Tool & die, molds
Full-time Employment: 8
Contact: Mr. Roger Geary, Pres
NAICS Codes: 333514
(2014)
1989Established:
PO Box 335Buckner, KY 40010-0335
Aichi Forge USA Inc
596 Triport RdGeorgetown, KY 40324-9529
502-863-7575
Steel forgings and powder metal sinter forgings for application in automotive/aircraft engine and suspension components.
Full-time Employment: 327
Contact: Mr. Takehiro Isogai, Pres
NAICS Codes: 332111
(2015)
1985Established:
AK Steel Corp
Ashland Works
170 Armco RoadAshland, KY 41101
606-329-7422
Steel slabs
Full-time Employment: 934
Contact: Mr. Doug Brown, Genl Mgr
NAICS Codes: 331221
(2014)
1921Established:
www.aksteel.com
Alabama Wire Products Inc
1100 West Park RoadElizabethtown, KY 42701
270-737-6581
Drawn wire for refrigerator shelving, oven racks, and modular storage racks; supplier of coil-based wire.
Full-time Employment: 29
Contact: Mr. Todd Seger, Genl Mgr
NAICS Codes: 331222
(2014)
2005Established:
www.sswholding.net
A-Line Tool & Die Inc
4158 Reservoir AveLouisville, KY 40213-2077
502-451-5741
Tool & die, plastic injection molds & aluminum stamping dies
Full-time Employment: 7
Contact: Mr. Greg French, Owner
NAICS Codes: 331318, 333514
(2014)
1967Established:
Allstate Tower Inc
232 Heilman AveHenderson, KY 42420
270-830-8512
AST is a full service tower contracting firm. . AST's also manufactures a plethora of steel structures including, but not limited to, telecommunication towers, agricultural material handling, and custom structures.
Full-time Employment: 150
Contact: Mr. Ben Johnston, Dir
NAICS Codes: 332312, 551114
(2015)
2005Established:
PO Box 25Henderson, KY 45419-0025
www.allstatetower.com
Alro Steel Corporation
310 Boxley AveLouisville, KY 40209
502-635-7481
Steel service center: shearing, burning & sawing
Full-time Employment: 50
Contact: Mr. William McMurphy, Genl Mgr
NAICS Codes: 423510
(2015)
1987Established:
www.alro.com
12/29/2015 Page 2 of 47
Alutrim
810 W Main StLebanon, KY 40033-1804
270-692-2142
Decorative aluminum trim for automotive/white goods iIndustries (sill/scuff plates and decorative aluminum trim i.e. door panel).
Full-time Employment: 192
Contact: Mr. John Simpson, HR
NAICS Codes: 331318, 332999
(2014)
1965Established:
www.angell-demmel.com
Amcor Flexibles Shelbyville
6850 Midland Industrial DrShelbyville, KY 40065-9743
502-223-7800
Flexible packaging for pharmaceutical industry
Full-time Employment: 115
Contact: Mr. Ron Jones
NAICS Codes: 326199, 332999
(2014)
1994Established:
www.amcor.com
America Sednair Compressor Systems
3551 Park Ave.Suite CPaducah, KY 42001
270-443-3111
Air compressor parts
Full-time Employment: 3
Contact: Mr. Hunter Guan, Pres
NAICS Codes: 332999
(2014)
2005Established:
P.O. Box 7954Paducah, KY 42002
www.americasednair.com
American Building Components
6975 Danville RdNicholasville, KY 40356-9594
859-887-4406
Metal building products
Full-time Employment: 26
Contact: Mr. Jack Bell, Plant Mgr
NAICS Codes: 331221, 423510
(2015)
1991Established:
PO Box 310Nicholasville, KY 40340-0310
www.abcmetalroofing.com/abcroofing
American Highway Fence
220 Midland Trail Industrial ParkMt. Sterling, KY 40353
859-498-3658
Fencing materials
Full-time Employment: 4
Contact: Mr. Robert Reynolds, Pres
NAICS Codes: 331222
(2015)
1997Established:
PO Box 717Mt. Sterling, KY 40353
www.highwayfenceusa.com
American Metal Supply Co
1250 Old Fern Valley RdLouisville, KY 40219
502-634-4321
Steel and metals distributor and manufacturer. Provides turnkey service of steel products as well as first tier processing and forming.
Full-time Employment: 30
Contact: Ms. Lynn Rhea, Branch Mgr
NAICS Codes: 332312
(2015)
1993Established:
www.americanmetalsupply.com
Andrews Laser Works Corp
100 Andrews WayWilder, KY 41071
859-292-8881
Provider of laser processing, metal stamping, welding, fabrication, and machining services; and manufacturer of jet engine components.
Full-time Employment: 99
Contact: Mr. Dave Schneider, Pres
NAICS Codes: 332119, 333514, 336412
(2014)
1946Established:
www.andrewslaserworks.com
12/29/2015 Page 3 of 47
Aquatic Access Inc
1921 Production DrLouisville, KY 40299
502-425-5817
Water-powered handicapped swimming pool & spa lifts meeting ADA guidelines for public pools, and other lifts for residential pools
Full-time Employment: 15
Contact: Ms. Linda Nolan, Pres
NAICS Codes: 332999
(2014)
1987Established:
www. AquaticAccess.com
Armag Corporation
Sub of Haydon Holdings, LLC
300 Armag AvenueBardstown, KY 40004-2041
502-348-3987
Steel fabricating: ammunition & explosive storage magazines
Full-time Employment: 62
Contact: Mr. Paul Haydon, Pres
NAICS Codes: 332312
(2014)
1999Established:
40 Lucknow CtBardstown, KY 40004-2113
www.armagcorp.com
Artiflex Manufacturing
111 Commerce BlvdFrankfort, KY 40601
502-565-4386
Manufacturer of metal stamping dies, die repair service, producer of metal stamped parts
Full-time Employment: 41
Contact: Mr. Darrin Whitehouse, Plant Mgr
NAICS Codes: 333514
(2015)
2008Established:
www.artiflexmfg.com
Asahi Forge of America Corporation
5030 Corporate WayRichmond, KY 40475
859-626-4100
Hot forge manufacturing for the automotive industry
Full-time Employment: 62
Contact: Mr. Hirofumi Mori, Vice Pres
NAICS Codes: 332111, 336310
(2014)
2003Established:
www.asahiforge.co.jp/en/
Ashland Fabricating & Welding
3321 Greenup AveAshland, KY 41101-2099
606-324-5255
Steel fabricating, arc & gas welding, grinding; drilling, cutting
Full-time Employment: 35
Contact: Mr. Gary L. Layman, Pres
NAICS Codes: 332312, 332999, 811310
(2014)
1954Established:
B & H Tool Works Inc
1785 Lancaster RdRichmond, KY 40475-8755
859-624-2458
A full service tooling, machining, stamping, and fabrication job shop. Capabilities include CNC, EDM, and laser machining. Progressive and hand transfer stamping capabilities
Full-time Employment: 81
Contact: Mr. Sammy Hammons, Pres
NAICS Codes: 332618, 333514, 333517, 336370
(2014)
1978Established:
PO Box 149Richmond, KY 40476-0149
www.bhtoolworks.com
B & H Tool Works Inc of Rockcastle County
83 Henderson DriveRockcastle Industrial Park SMount Vernon, KY 40456
606-256-4878
Specialty machinery, metal stamping tooling, dies
Full-time Employment: 26
Contact: Mr. Everett Harper, Genl Mgr
NAICS Codes: 333514
(2014)
1998Established:
PO Box 1228Mount Vernon, KY 40456-1228
Bandana Co Inc
6228 Strawberry LaneLouisville, KY 40214
502-637-8752
Metal yard sculptures
Full-time Employment: 2
Contact: Mr. Richard Kolb, Pres
NAICS Codes: 332323
(2014)
1991Established:
www.yardbirds.info
12/29/2015 Page 4 of 47
Bekaert Corporation
2000 Isaac Shelby DrShelbyville, KY 40065-9129
502-633-6722
Preformed steel staple wire, fine wire, flat wire, nylon-coated wire, tin-coated wire and galvanized wire
Full-time Employment: 96
Contact: Mr. Kendall Hall, Plant Mgr
NAICS Codes: 331222
(2014)
1990Established:
www.bekaert.com
Berea Tool & Cutter Grinding
93 Mason Lake RdBerea, KY 40403-2177
859-986-2214
Tool and die, cutter grinding, fixtures, prototype, fabricating, machining and repair work.
Full-time Employment: 5
Contact: Ms. Ponjetta Hobbs, Owner
NAICS Codes: 333318, 333514
(2014)
1984Established:
www.bereatool.com
Bilstein Cold Rolled Steel LP
3250 Spring Hollow AvenueBowling Green, KY 42104
270-908-4906
Cold rolled steel production mill
Full-time Employment: 50-90
Contact: Mr. Mark J Loik, Pres/CEO
NAICS Codes: 331110
(announced)
2013Announced:
www.bilstein-north-america.com
Blandford Machine & Tool Co
5604 Fern Valley RdLouisville, KY 40228-1056
502-964-3375
Machine shop: tools, dies, jigs, fixtures, prototypes & special machinery; drilling & boring; progressive dies
Full-time Employment: 12
Contact: Mr. Todd Bello, Pres
NAICS Codes: 333249, 333318, 333514
(2014)
1979Established:
Blue Grass Manufacturing Inc
1454 Jingle Bell LaneLexington, KY 40509-4112
859-233-7445
Contract manufacturer & fulfillment center. CNC machining all materials, metal fabrication; spot, MIG, TIG, welding, and electro mechanical assembly, fabricated wire, tube and pipe. We run production quantities only. No tooling
Full-time Employment: 80
Contact: Mr. Don R. Bundy, Pres
NAICS Codes: 332618, 332710, 332999, 493110, 561910
(2014)
1961Established:
www.bluegrassmfg.com
Bottoms Engineering & Service Inc
955 Chenault RdFrankfort, KY 40601
502-695-2200
Structural steel fabricating for the KY highway bridge industry. Handrails, fence, finger dams, steel, and contractor supplies
Full-time Employment: 13
Contact: Mr. Thomas Thompson, Pres
NAICS Codes: 332312
(2014)
1967Established:
www.bottomsengineering.com
Branch Tool Inc
680 Chappells Dairy RoadSomerset, KY 42503
606-679-9335
Machine shop: milling & CNC machining; tool & die
Full-time Employment: 20
Contact: Mr. Jesse Reynolds, Pres
NAICS Codes: 332710, 333514
(2014)
1998Established:
12/29/2015 Page 5 of 47
Brewer Machine and Parts LLC
Highway 70 WCentral City, KY 42330
270-754-1768
Steel fabricating, gang rip saws and woodworking machinery, custom machinery for wood industry.
Full-time Employment: 40
Contact: Mr. Alvin Bates
NAICS Codes: 332216, 332312, 333243
(2014)
1969Established:
PO Box 512Central City, KY 42330-0512
www.brewermach.com
C & S Machine & Manufacturing Corp
3832 Fitzgerald RdLouisville, KY 40216-5292
502-778-4479
Machine shop: CNC machining, arc & gas welding, drilling, boring, cutting, lathe & mill work, production machining. Tier 1 supplier. ISO 9001
Full-time Employment: 35
Contact: Mr. Robert Steele, Pres
NAICS Codes: 332710, 332721, 332999
(2014)
1969Established:
www.csmachinemfg.com
C G S Machine & Tool Inc
2750 Griffin DriveBG CampusBowling Green, KY 42101
270-783-3589
Specialty machinery, tool & die, spare parts, production runs
Full-time Employment: 56
Contact: Mr. Stephen Allen, Pres
NAICS Codes: 332710, 333249, 333514
(2015)
1994Established:
www.cgsmachine.com
Caldwell Tanks Inc
4000 Tower RdLouisville, KY 40219-1901
502-964-3361
Manufacture steel water tanks & towers
Full-time Employment: 400
Contact: Mr. Bernard Fineman, Pres
NAICS Codes: 332312, 332420, 423830
(2015)
1985Established:
PO Box 35770Louisville, KY 40232-5770
www.caldwelltanks.com
Campbells Machine Shop Inc
387 Garfield Cemetery LaneGarfield, KY 40140-9801
270-756-0995
CNC mill & lathe work & screw machine products, pharmaceutical products, automotive products, lawn care products, wire EDM, CNC plasma
Full-time Employment: 5
Contact: Mr. Tim Campbell, Pres
NAICS Codes: 332721, 332999
(2014)
1987Established:
6307 E Highway 60Garfield, KY 40140-9801
www.campbellsmachineshop.com
Campbellsville Industries Inc
440 Taylor BlvdCampbellsville, KY 42718-1200
270-465-8135
Ornamental metal & aluminum fabricating; steeples, cupolas, crosses, cornices, awnings, columns, louvers, shutters, railings & balusters
Full-time Employment: 78
Contact: Mr. Rick Moon
NAICS Codes: 332323
(2014)
1955Established:
PO Box 278Campbellsville, KY 42719-0278
www.cvilleindustries.com
12/29/2015 Page 6 of 47
Carbide Products Inc
800 Clayton AveGeorgetown, KY 40324-1571
502-863-2340
Special tools, dies, machine parts any material; multi-discipline hi-precision machine, turn, grind, lap, EDM; solid & brazed carbide cutting tools; carbide, steel & composite
Full-time Employment: 34
Contact: Mr. Carl D Strippelhoff, Pres
NAICS Codes: 325180, 332216, 332710, 333514, 333515, 33351
(2014)
1942Established:
PO Box 550Georgetown, KY 40324-0550
www.carbidepros.com
Cardinal Manufacturing Co
225 Eiler AveLouisville, KY 40214-2924
502-363-2661
Steel, bronze, brass & aluminum roll formed metal products & parts
Full-time Employment: 52
Contact: Mr. Eric Weisbach, Prdtn/Ops Exec
NAICS Codes: 331221, 331420, 332322
(2015)
1958Established:
PO Box 14127Louisville, KY 40214-0127
www.cardinalmfg.com
Cardinal Shower Enclosures
4795 Shepherdsville RoadLouisville, KY 40218
502-969-4059
Full service manufacturer of shower door enclosures. Commercial products.
Full-time Employment: 330
Contact: Ms. Colleen Wilson, HR Mgr
NAICS Codes: 332999
(2015)
N/AEstablished:
www.cardinalshower.com
CC Metals & Alloys LLC
1542 North Main StCalvert City, KY 42029-9251
270-395-7631
Ferro alloys (metal) production & warehouse distribution
Full-time Employment: 200
Contact: Mr. Motti Korf, CEO
NAICS Codes: 331110, 541614
(2015)
1949Established:
PO Box 217Calvert City, KY 42029-0217
www.ccmetals.com
CCI Industrial Services
799 Kit Cowan RdSomerset, KY 42501
606-677-0241
Metal fabrication, machinery installation & maintenance, certified heat treated wood crate packaging, air & water piping, CNC machining, heavy haul transportation
Full-time Employment: 70
Contact: Mr. Rick Cable, Owner
NAICS Codes: 332312, 423830
(2015)
2004Established:
P.O. Box 433Somerset, KY 42502
www.cciindustrial.us
Central Machinery Movers and Fabricators Inc
137 Ballard RdLancaster, KY 40444-9043
859-548-2506
Steel fabricating
Full-time Employment: 13
Contact: Mr. Jim Lane, Pres
NAICS Codes: 332312
(2015)
1994Established:
PO Box 41Lancaster, KY 40444-0041
12/29/2015 Page 7 of 47
Centria
1099 US Highway 421 SFrankfort, KY 40601-8821
502-695-5578
Steel building components: electrified floor decks, roll formed products, gutters, louvers, vents, siding & wall panels
Full-time Employment: 90
Contact: Mr. William Jones, VP
NAICS Codes: 332322, 332999
(2015)
1987Established:
www.centria.com
Cepeda Associates Inc
11100 Decimal DrLouisville, KY 40299-2440
502-267-4945
Submarine air purifying equipment, welding, machining, fabrication
Full-time Employment: 52
Contact: Mrs. Star Dillard, Pres
NAICS Codes: 332710, 333413, 333514, 541330, 811310
(2014)
1977Established:
http://www.cepedaassociates.com
Challenger Lifts Inc
200 Cabel StLouisville, KY 40206-1810
502-625-0700
Designs, manufactures and distributes vehicle lifts and accessories for the automotive repair sector.
Full-time Employment: 92
Contact: Mr. David Reavis, Pres
NAICS Codes: 332999
(2014)
1995Established:
PO Box 3944Louisville, KY 40201-3944
www.challengerlifts.com
Chieftain Steel LLC
South US 127Liberty, KY 42539
606-787-4613
Manufacture welded rolled steel tube
Full-time Employment: 25
Contact: Mr. Bryan Floyd, Owner
NAICS Codes: 331210
(2015)
2008Established:
1498 S Wallace Wilkinson BlvdLiberty, KY 42539
www.chieftainsteel.com
Clark Machine Tool & Die Inc
1314 Shun PikeNicholasville, KY 40356-9401
859-885-9488
Customer specific production machinery, special fixtures, special tooling, including electronics and computer programming on the machinery
Full-time Employment: 19
Contact: Mr. Ray Clark, Pres
NAICS Codes: 333318, 333514, 811219
(2015)
1967Established:
Clayton & Lambert Manufacturing Co
3813 W Highway 146Buckner, KY 40010
800-626-5819
Grain bins, storage silos, stainless steel panels for in ground pools and spas & pool structures, outdoor poster panels, standing seam roofs, above ground containment basins
Full-time Employment: 8
Contact: Mr. John W. Lambert, Pres
NAICS Codes: 332311, 332313, 332999
(2014)
1956Established:
PO Box 9Buckner, KY 40010-0009
www.claytonlambert.com
Clinton Industries Inc
203 Valley Creek RdElizabethtown, KY 42701-9052
270-769-1354
Tools, dies & specialty machinery
Full-time Employment: 16
Contact: Mr. Clint Schaffrick, Pres
NAICS Codes: 333318, 333514
(2015)
1967Established:
12/29/2015 Page 8 of 47
Collins Engineering Inc
1584 US Highway 41A NDixon, KY 42409
270-639-7956
Machine shop: general & CNC machining, boring & cutting & lathe & mill work. Build molds for the plastic injection molding industry.
Full-time Employment: 4
Contact: Mr. Edward Knapp, Pres
NAICS Codes: 332710, 333511, 811310
(2015)
1985Established:
PO Box 400Dixon, KY 42409
www.pioneerplastics.com
Combs Custom Manufacturing
1300 Lakeside DrJackson, KY 41339-9678
606-666-2418
Truck bumpers & accessories, push bars, grilles & grille guards; equipment parts - loaders, dozers, handrails, custom off road and ATV parts
Full-time Employment: 1
Contact: Mr. Darrell Miller, Owner
NAICS Codes: 331221, 332312, 336390
(2015)
1979Established:
Commonwealth Tool & Machine Inc
3511 Main StStamping Ground, KY 40379-9631
502-535-4430
Design, build and integrate robotic welding equipment, resistance welders, spot welders, end effectors, tool & die, special machines & gauges, EDM work, materials handling equip & machine shop
Full-time Employment: 29
Contact: Mrs. Linda Whitlock, Pres
NAICS Codes: 332313, 332710, 333514
(2014)
1984Established:
PO Box 120Stamping Ground, KY 40379-0120
www.commonwealthtool.com
Conco Inc
4000 Oaklawn DrLouisville, KY 40219-2796
502-969-1333
Metal fabricated ammunition containers & boxes
Full-time Employment: 126
Contact: Mr. Gil Everson, Pres/CEO
NAICS Codes: 332431, 332439
(2015)
1967Established:
PO Box 19076Louisville, KY 40259-0076
www.concocontainers.com
Contech Engineered Solutions LLC
5726 Roberts DrAshland, KY 41102-8361
606-928-6404
Corrugated steel culvert pipe
Full-time Employment: 10
Contact: Mr. J.D. Griffith, Plant Supt
NAICS Codes: 332439, 332996
(2014)
1966Established:
www.conteches.com
CONTECH Engineered Solutions LLC
700 Tech DrWinchester, KY 40391-9662
859-744-3339
Steel retaining sheets & multiplate bridge planks. Galvanized structural steel & aluminum drainage & bridge products & retaining walls
Full-time Employment: 48
Contact: Mr. Joe Kuhn, Plant Mgr
NAICS Codes: 331221
(2014)
1985Established:
www.conteches.com
Contract Machining & Manufacturing
2425 Over DrLexington, KY 40511-2613
859-253-9700
General, CNC, prototype & custom machining; tooling
Full-time Employment: 54
Contact: Mr. Fred Lawson, Pres
NAICS Codes: 332420, 332710, 332721, 332996, 336350
(2014)
1981Established:
www.contract-machining.com
12/29/2015 Page 9 of 47
Corrosion Resistant Reinforcing
935 Wendstrup DriveWalton, KY 41094
513-719-0114
Fabricate stainless rebar
Full-time Employment: 21
Contact: Mr. Robert faircloth, Owner
NAICS Codes: 332312
(2015)
2015Established:
10320 S. Medallion DriveCincinnati, OH 45241
www.cmcmmi.com
Craig Machinery & Design Inc
629 W Magnolia AveLouisville, KY 40208-2239
502-635-7950
Automation machinery & tooling, plastic assembly equipment. Also clam shell, blister welding and closure machinery. Low volume contract plastic welding
Full-time Employment: 20
Contact: Mr. Ken Rabeneck, Pres
NAICS Codes: 333514, 333999
(2015)
1977Established:
www.craigmachinery.com
Cumberland Mine Service Inc
12326 N US Hwy 119Totz, KY 40870
606-573-7650
Metal fabricating; custom ceramic & abrasion resistant coating service; ceramic liners, construction and maintenance
Full-time Employment: 39
Contact: Ms. Nancy Garland
NAICS Codes: 332812, 332999
(2015)
1980Established:
PO Box 394Cumberland, KY 40823-0394
www.cumberlandmineservice.com
Curtis-Maruyasu America Inc
Plt 1, 2, & 3
665 Metts DrLebanon, KY 40033-1909
270-692-2109
Motor vehicle fuel systems & parts; fabricates pipes & fittings fuel or oil caps, hybrid fuel storage systems, fuel injection systems, fuel tanks, breather elements, nonferrous alloy tubing
Full-time Employment: 470
Contact: Mr. Doug Vyverberg, Pres
NAICS Codes: 332996, 336390
(2014)
1988Established:
www.curtismaruyasu.com
D C Morrison Co
201 Johnson StCovington, KY 41011-1437
859-581-7511
Machine shop: keyseaters, Schaver speed lathe, feedscrews
Full-time Employment: 20
Contact: Mr. Roger Reder, Treas
NAICS Codes: 332710, 332999, 333517
(2015)
1950Established:
P O Box 586Covington, KY 41011
www.dcmorrison.com
D G Industries Inc
1270 S Preston HwyShepherdsville, KY 40165
502-955-1670
Custom metal, steel & plastic fabricating
Full-time Employment: 8
Contact: Mr. Donald Gravatte, Pres
NAICS Codes: 326199, 332312, 332322
(2014)
1989Established:
PO Box 753Mt. Washington, KY 40047-0753
Dafco Aerospace
4830 Crittenden DrLouisville, KY 40209
502-361-8826
Investment casting foundry
Full-time Employment: 20
Contact: Mr. John Dameron, CEO
NAICS Codes: 331512, 331513
(2014)
2011Established:
www.dameron.net
12/29/2015 Page 10 of 47
Dafco Inc
Div Dameron Alloy Foundries
6851 Cane Run RdLouisville, KY 40258-2845
502-933-9311
Investment castings foundary
Full-time Employment: 59
Contact: Mr. John Dameron, CEO
NAICS Codes: 331512, 331513
(2015)
1994Established:
www.dameron.net
Dahl & Groezinger Inc
940 W 9th StOwensboro, KY 42301-2001
270-684-1404
Scrap iron, ferrous & nonferrous metal processing, export scrap.
Full-time Employment: 20
Contact: Mr. Drew Kirkland, Pres
NAICS Codes: 331420, 331511, 423930
(2014)
1885Established:
PO Box 926Owensboro, KY 42302-0926
Dant Clayton Corp
1500 Bernheim LnLouisville, KY 40210-2210
502-634-3626
Grandstands/bleachers, spectator seating, custom structural steel products and press boxes
Full-time Employment: 110
Contact: Mr. Keith Williams, Pres/CEO
NAICS Codes: 332312, 337127
(2015)
1979Established:
www.dantclayton.com
Davert USA Inc
100 N Graham AvenueBowling Green, KY 42102
270-796-5076
Steel carrier
Full-time Employment: 19
Contact: Mr. Bob Collier, Pres
NAICS Codes: 332999
(2013)
2013Established:
Deltech Manufacturing Inc
3910 Oaklawn DrLouisville, KY 40219-2719
502-962-3500
Manufacture and distribute our own line of fitnness equipment, conveyor bearings and utility pole components along with contract machining, metal stamping and metal fabrication
Full-time Employment: 32
Contact: Mr. Glenn Hillis, CEO
NAICS Codes: 326199, 332119, 332710, 332721, 333514, 33992
(2014)
1984Established:
www.deltechmfg.com
Denios Inc
1152 Industrial BlvdLouisville, KY 40219
502-933-7272
Spill containment and storage equipment for chemicals
Full-time Employment: 70
Contact: Mr. Brian Pahl, Pres
NAICS Codes: 332312
(2015)
1990Established:
www.denios-us.com
Derby Welding & Machine Co Inc
4624 Pinewood RdLouisville, KY 40218-2930
502-966-0232
Steel fabricating & welding
Full-time Employment: 18
Contact: Mr. Gary Young, Owner
NAICS Codes: 332312, 811310
(2014)
1967Established:
Desma USA Inc
2195 Arbor Tech DrHebron, KY 41048
859-525-6610
Rubber injection molding machinery sales and service. Production of rubber machine injection molds.
Full-time Employment: 36
Contact: Mr. L. Scott Early, Pres
NAICS Codes: 333249, 333511
(2015)
1999Established:
www.desma-usa.com
12/29/2015 Page 11 of 47
Dotweld
1300 Lakeside DriveJackson, KY 41339
606-666-9200
Metal manufacturing and fabrication
Full-time Employment: 3
Contact: Ms. Dottie Combs, Owner
NAICS Codes: 332312, 811310
(2014)
2002Established:
PO Box 703Jackson, KY 41339
Drilco Industrial Inc
Div Thompson International Inc
5840 Airline RdHenderson, KY 42420-9561
270-826-3751
Drill pipe fabricating, stabilizers, shock subs
Full-time Employment: 15
Contact: Mr. Clifford Thompson, Pres
NAICS Codes: 332996, 333515
(2014)
1952Established:
PO Box 656Henderson, KY 42419-0656
www.thompsoninternational.com
Drill Steel Service Inc
4898 Highway 15Whitesburg, KY 41858-8582
606-633-4492
Steel rods, overcast, mandoors and other metal products. Distributes cutting bits & roof bolt products
Full-time Employment: 21
Contact: Mr. Larry Cornett, Pres
NAICS Codes: 331110
(2014)
1983Established:
DSI Underground Systems Inc
UNA Tunneling Division
1032 E Chestnut StLouisville, KY 40204-1019
502-583-1001
Structural steel fabricating & underground shaft and tunnel liners as well as rock bolts; all used in mining and tunneling applications.
Full-time Employment: 44
Contact: Mr. Tom Clemens, Pres
NAICS Codes: 332312, 332313
(2015)
1985Established:
1774 Mellwood AveLouisville, KY 40206-1756
www.dsiunderground.com
Dynamic Fabrication Inc
3523 US Hwy 62EBeaver Dam, KY 42320
270-274-5810
Full service steel fabrication
Full-time Employment: 34
Contact: Mr. Brian Law, Owner/Pres
NAICS Codes: 332312
(2014)
2006Established:
Eastlex Machine Corp
2170 Christian RdLexington, KY 40509-4300
859-254-1388
Attaching & belt loop cutting machines & press-type machines.
Full-time Employment: 16
Contact: Mr. Andrew Schmidt, Pres
NAICS Codes: 332999, 333517
(2014)
1956Established:
www.eastlex.com
Eckert Welding & Erectors Inc
1015 Town DriveWilder, KY 41076
859-572-9444
Arc, gas, MIG, TIG & heliarc welding; steel fabricating & erecting; steel erection & welding services
Full-time Employment: 20
Contact: Ms. Teresa Eckert, CEO
NAICS Codes: 238120
(2015)
1946Established:
www,eckertwelding.com
12/29/2015 Page 12 of 47
EDAC Composites LLC
1400 Jamike AvenueErlanger, KY 41018
859-283-7155
Manufacture composite engine and aerostructure components to support the aerospace industry.
Full-time Employment: 187
Contact: Mr. Mike Braun, Plant Mgr
NAICS Codes: 325211, 326199, 332999, 336413, 541712
(2014)
1986Established:
www.edactechnologies.com
Elizabeth Carbide Kentucky
dba Scheu & Kniss
1500 W Ormsby AveLouisville, KY 40210-2499
502-635-6303
Parts and service for rotary tablet presses
Full-time Employment: 47
Contact: Mr. David Risinger, Genl Mgr
NAICS Codes: 332710, 332721, 333514, 333999, 336413
(2015)
1915Established:
PO Box 2947Louisville, KY 40201-2947
www.eliz.com
EST Tool & Machine Inc
55 Dug Hill RdBrodhead, KY 40409
606-758-4626
Custom tooling and machining for the automotive, aerospace, forging and railroad industries. 3 axis CNC machining, CNC lathe work, wire EDM services, welded fabrication
Full-time Employment: 30
Contact: Mr. A. Eugene Taylor, CEO
NAICS Codes: 333514
(2015)
1995Established:
PO Box 357Brodhead, KY 40409-0357
www.esttool.com
EZ-Access
Homecare Products Inc
3215 SR 2835Morganfield, KY 42437
270-389-1702
Manufacture portable wheelchair ramps and modular wheelchair ramps for home/commercial use. Also manufacture Vertical Porch Lifts for home/commercial use.
Full-time Employment: 26
Contact: Mr. Don Everard, CEO
NAICS Codes: 332999, 333924, 339113
(2014)
2009Established:
Fab Steel Inc
476 Transport CtLexington, KY 40511-1015
859-253-0630
Structural and miscellaneous steel fabricating
Full-time Employment: 20
Contact: Mr. Duane Redmon, Secy/Treas
NAICS Codes: 332312
(2014)
1992Established:
www.fabsteelinc.com
FABCO Inc
1339 Campbellsville Rd.Columbia, KY 42728-1236
270-384-4657
Machine shop: arc & gas welding; drilling, boring, cutting, honing; structural steel fabricating, steel truckbed flats, custom benches, plasma cut designs, stairs, handrail, guardrail
Full-time Employment: 12
Contact: Mr. Anthony Janes, Owner
NAICS Codes: 332312, 333318, 811310
(2014)
1980Established:
PO Box 486Columbia, KY 42728-0486
12/29/2015 Page 13 of 47
Fabricated Metals
Div Fabricated Metals LLC
6300 Kenjoy DrLouisville, KY 40214-2927
502-363-2625
Railroad and mass transit accessories: houses/bunglows/cases/ cantilevers/bridges
Full-time Employment: 125
Contact: Ms. Tina Fowler, Pres
NAICS Codes: 332999
(2014)
1955Established:
PO Box 9535Louisville, KY 40209-0535
www.fabricatedmetals.com
Farmer's Gate Co
8610 Liberty RdCampbellsville, KY 42718-8278
270-465-7056
Steel gates, corral panels, round bale feeders, walk-throughs
Full-time Employment: 20
Contact: Mr. Mark Farmer, Pres
NAICS Codes: 332312, 332323, 333111
(2013)
1997Established:
www.farmersgate.com
Fast Fabricators LLC
164 Hamilton CtLouisville, KY 40229-4023
502-955-8525
Ductile iron pipe fabricating
Full-time Employment: 15
Contact: Mr. Greg Creehan, Opers Mgr
NAICS Codes: 332996
(2014)
1991Established:
www.fastfab.com
Federal-Mogul Products Inc
Vehicle Safety & Protection Division
20 Aberdeen DrGlasgow, KY 42141-8238
270-651-3609
Heavy duty truck brake friction blocks for the commercial vehicle industry.
Full-time Employment: 175
Contact: Mr. Rick Zimmerman, Plant Mgr
NAICS Codes: 332999, 336211
(2014)
1996Established:
www.federalmogul.com
Felker Brothers Corp
125 Beaver TrlGlasgow, KY 42141-1273
270-678-4143
Stainless steel pipe, stainless steel pipe and tube 2" thru 24" in diameter.
Full-time Employment: 75
Contact: Mr. Gary Hartell, Plant Mgr
NAICS Codes: 331221
(2014)
1993Established:
www.felkerbrothers.com
Ferrous85" Company
Ferragon Corporation
100 Steel Plant RoadWilder, KY 41076
859-261-6161
Steel toll processors of flat rolled steel
Full-time Employment: 20
Contact: Mr. Eduardo Gonzalez, Pres
NAICS Codes: 331110
(2014)
2011Established:
PO Box 429Newport, KY 41071
www.ferrous85.com
12/29/2015 Page 14 of 47
FET Engineering Inc
903 Nutter DrBardstown, KY 40004-2606
502-348-2130
Nickel molds, vacuum form tooling and trials,fixtures, jigs, foam tooling, guages, laser welding, CAD design/development for the automotive, aerospace, medical and home building industries
Full-time Employment: 43
Contact: Ms. Ann Hardin, Vice Pres
NAICS Codes: 332313, 333511, 333514, 541512
(2014)
1987Established:
www.fetusa.com
Fikeco Inc
149 Tech WayCynthiana, KY 41031-9217
859-234-2878
Sheet metal fabrication, HVAC, welding
Full-time Employment: 21
Contact: Mr. James R. Donaldson, Pres
NAICS Codes: 332312, 332322
(2015)
1985Established:
PO Box 576Cynthiana, KY 41031-0576
Floyd Industries LLC
2248 KY 910Liberty, KY 42539
606-787-6343
Livestock handling equipment made from tubular steel
Full-time Employment: 32
Contact: Mr. Bryan Floyd, Member
NAICS Codes: 331210
(2014)
2006Established:
6401 S US 127Liberty, KY 42539
www.floydgate.com
Freedom Metals Inc
1225 S 15th StLouisville, KY 40210-1860
502-637-7657
Ferrous, nonferrous, industrial & precious scrap processing & recycling base metals, headquarters
Full-time Employment: 82
Contact: Mr. Bruce Blue, Chairman/CEO
NAICS Codes: 423510, 423930, 551114
(2014)
1983Established:
1401 W Ormsby AveLouisville, KY 40210
www.freedommetals.com
Freedom Metals Inc
194 Crucible RoadElizabethtown, KY 42701
270-982-0888
Ferrous, nonferrous, industrial & precious scrap processing & recycling base metals
Full-time Employment: 25
Contact: Mr. Bruce Blue, Chairman/CEO
NAICS Codes: 423510, 423930
(2015)
2005Established:
PO Box 1024Elizabethtown, KY 42702-1024
www.freedommetals.com
Freedom Metals Inc
425 Gawthrop DrWinchester, KY 40391
859-744-7555
Ferrous, nonferrous, industrial and precious scrap processing and recycling base metals
Full-time Employment: 25
Contact: Mr. Bruce Blue, Pres/Owner
NAICS Codes: 423510, 423930, 562920
(2015)
2008Established:
Fuel Total Systems Kentucky Corporation
535 Corporate DriveLebanon, KY 40033
270-692-1117
Manufacture and supply automotive plastic fuel tank systems and fuel filler pipe systems
Full-time Employment: 89
Contact: Mr. Tatsutoshi Takashima, Pres
NAICS Codes: 326199, 332996
(2014)
2010Established:
12/29/2015 Page 15 of 47
GCH International Inc
330 Boxley AvenueLouisville, KY 40209
502-636-1374
Bulk materials handling equipment, conveyors & storage bins. Polishing & CNC punching; industrial sheet metal & stainless steel fabricating, custom sheet metal fabrication; HVAC Duct, process equipment.
Full-time Employment: 80
Contact: Mr. John Thornton, Pres/CEO
NAICS Codes: 332312, 332322, 333921, 333922, 551114
(2015)
1941Established:
PO Box 17347Louisville, KY 40217-0347
www.gchintl.com
General Products Corporation
188 Earl Davis DrRussellville, KY 42276
270-726-6126
Machining and assembly of cast iron and aluminum castings to manufacture products for the automotive and heavy-duty truck industries
Full-time Employment: 76
Contact: Mr. Stan Edger, Plant Mgr
NAICS Codes: 332710, 332999, 336390
(2014)
2004Established:
www.general-products.com
Gerdau
12612 Avoca RdLouisville, KY 40223-4708
502-245-0256
Reinforcing steel sales, detailing and fabrication.
Full-time Employment: 20
Contact: Mr. Gregory R. Fleitz, Sls Dir
NAICS Codes: 332312
(2014)
1965Established:
www.gerdau.com
Gerdau Calvert City Mill
1035 Shar-Cal RdCalvert City, KY 42029
270-395-3100
Structural steel mill: angles, channels, flats and misc. channel
Full-time Employment: 140
Contact: Mr. Jim Christina, VP/Genl Mgr
NAICS Codes: 331110, 332312, 332510
(2015)
1983Established:
www.gerdau.com/longsteel
Gibbs Die Casting Corp
KOCH Enterprises Inc
369 Community DrHenderson, KY 42420-4397
270-827-1801
Aluminum die castings & Gibbs headquarters
Full-time Employment: 861
Contact: Mr. Steve Church, Pres
NAICS Codes: 331523, 332999, 551114
(2015)
1966Established:
www.gibbsdc.com
Great Northern Building Products LLC
901 South 15th StreetLouisville, KY 40210
502-266-6662
Manufacturer and distributor of specialty building materials, such as nails, brackets, vents slate roofing and flooring, industrial roofing products, shutters and drywall tools.
Full-time Employment: 34
Contact: Mr. Carroll Mackin Jr, Owner
NAICS Codes: 331318, 331491, 332618, 333120, 423320, 42351
(2015)
2001Established:
www.gnbuilding.com
Greenlee Textron
4601 E Indian TrailLouisville, KY 40213
502-966-2508
Manufacturer of industrial tools and parts including hand tools and battery-operated.
Full-time Employment: 64
Contact: Mr. Fred Miller, Facility Mgr
NAICS Codes: 332216, 333991
(2015)
N/AEstablished:
http://www.greenlee.com/
12/29/2015 Page 16 of 47
H&S Gate, Inc.
232 Fields RoadRussell Springs, KY 42642
606-679-5090
Gate manufacturing
Full-time Employment: 31
Contact:
NAICS Codes: 332312
(2015)
2015Established:
P.O. Box 307Russell Springs, KY 42642
Hafendorfer Machine Inc
550 O'Bryne Ave.Louisville, KY 40223
502-244-3669
Machining, sheet metal fabricating, forming, cutting
Full-time Employment: 30
Contact: James Hafendorfer, Pres
NAICS Codes: 332999
(2015)
1994Established:
www.hafendorfer.com
Hanner Machine Co
130 Pond River Colliers RdMadisonville, KY 42431-8561
270-821-0947
Machine shop: precision machining, fabricated steel, hard chrome plating, custom welding, hydraulic cylinders & components
Full-time Employment: 12
Contact: Mr. Randy Hanner, Co-Owner
NAICS Codes: 332312, 332813, 333318
(2014)
1976Established:
www.hannermachine.com
Harbor Steel & Supply Corp
2381 Innovation DriveLexington, KY 40511-1085
859-255-7884
Steel service center: metal cutting, burning & shearing, laser cutting, press brake, saw cutting
Full-time Employment: 50
Contact: Ms. Melissa Marcum, Div Mgr
NAICS Codes: 423510, 493110
(2014)
1995Established:
www.harborsteel.com
Harris Engineering Inc
999 Broadway StBarlow, KY 42024-9616
270-334-3633
Bipods for guns & rifles; adapters
Full-time Employment: 66
Contact: Mrs. Edna Harris, Pres
NAICS Codes: 332999
(2015)
1975Established:
Harry Gordon Steel Co Inc
695 N Main StreetWinchester, KY 40391
859-255-2442
Fabricated structural metal/steel manufacturing
Full-time Employment: 20
Contact: Mr. Ben Norris, Pres
NAICS Codes: 332312
(2015)
2014Established:
PO Box 330Winchester, KY 40392
Heartland Automation LLC
106 Supply CourtGeorgetown, KY 40324
502-868-7638
Custom industrial automation equipment design & build including turn key integration on customer site. Robotic work cells, conveyors, material handling & assembly machinery, headquarters.
Full-time Employment: 60
Contact: Mr. Scott McElmurray, VP/Genl Mgr
NAICS Codes: 332710, 333514, 333922, 333992, 551114
(2014)
2001Established:
www.ici-ky.com
HEC Manufacturing Inc
222 W John Rowan BlvdBardstown, KY 40004-9103
502-331-9500
Custom structural steel fabricating, steel returnable containers (racks or pallets)
Full-time Employment: 33
Contact: Mr. Leo Essex, Pres
NAICS Codes: 332312
(2014)
1997Established:
12/29/2015 Page 17 of 47
Huff Technologies Inc
325 Industrial RdMorganfield, KY 42437
270-389-4833
PC and PLC based systems to test production engines and sub-systems. Custom testing, assembly and inspections equipment. Process machinery and systems for automotive and industrial. Pallatizers
Full-time Employment: 10
Contact: Mr. Darrel Huff, Owner/Pres
NAICS Codes: 332999, 333318, 334513, 334519
(2014)
1998Established:
www.huff-tech.com
Ideal Machine & Tool Inc
7150 Distribution DrLouisville, KY 40258-2825
502-995-5751
General machine shop, CNC milling & turning, press operations, dies & fixtures
Full-time Employment: 8
Contact: Mr. Dennis Bradley, Pres
NAICS Codes: 332710, 333514
(2015)
2004Established:
IDT Tools Inc
108 Corporate DriveFrankfort, KY 40601-8311
502-848-5858
Produce die components and stamping dies.
Full-time Employment: 21
Contact: Mr. Yoji Nakamura, Pres
NAICS Codes: 333514
(2015)
2003Established:
Imperial Tool & Manufacturing Co Inc
725 Westland DrLexington, KY 40504-1015
859-231-6127
Design and builder of molds, tools, dies, fixtures, gauges as well as product development
Full-time Employment: 13
Contact: Mr. David Meeks, Pres
NAICS Codes: 326199, 333514
(2014)
1966Established:
www.imperialtool.com
Industrial Carbide Saw & Tool
3810 Bishop LnLouisville, KY 40218-2974
502-968-8104
Carbide tipped cutting tools; band saw, segmental & inserted saw blades, strapping, fittings & knives, stretch film, plastic and steel banding, sharpening services
Full-time Employment: 24
Contact: Mr. C. J. Crush Jr., Pres
NAICS Codes: 332216, 333243, 333515, 333517, 811310
(2015)
1970Established:
www.icstc.com
Industrial Machine Services Inc
83 State Route 85 WSacramento, KY 42372-9533
270-736-2283
Machine shop: general machining, sheet & plate steel fabricating & equipment repair; pins and bushings for mining industry.
Full-time Employment: 11
Contact: Mr. Barry L. Ellis, Owner
NAICS Codes: 332312, 332710, 811219
(2014)
1989Established:
www.industrialmachine.info
Industrial Mold & Machine Co
1101 Wing AveOwensboro, KY 42303-0867
270-684-3668
Machine shop: general, CNC & electrical discharge machining; injection & blow molds; arc, MIG & TIG welding; mill & lathe work. Waterjet cutting service.
Full-time Employment: 19
Contact: Mr. Tom Jones, Vice Pres
NAICS Codes: 333318, 333514, 811310
(2014)
1986Established:
www.immci.com
Indy Honeycomb
1016 Mary Laidley DrCovington, KY 41017
859-359-4052
Welded metallic honeycomb
Full-time Employment: 34
Contact: Mr. Don Prysi, Pres
NAICS Codes: 332999
(2014)
1996Established:
www.indyhoneycomb.com
12/29/2015 Page 18 of 47
International Identification Inc
dba National Band & Tag Co
721 York StNewport, KY 41072-0430
859-261-2035
Animal identification tags, including livestock ear tags, poultry wing bands, metal & bar coded identification tags
Full-time Employment: 58
Contact: Mrs. Faye Wendel, Pres
NAICS Codes: 332119, 332999
(2015)
1902Established:
PO Box 72430Newport, KY 41072-0430
www.nationalband.com
International Mold Steel Inc
Sub Okaya (U S A) Inc
6796 Power Line DrFlorence, KY 41042-3093
859-342-6000
Specialty steel distributor and service center: Steel cutting, tool steel & mold steel. Machining, grinding, milling, and gun drilling
Full-time Employment: 22
Contact: Mr. Thomas Schade, Exec VP
NAICS Codes: 332710, 423510
(2014)
1997Established:
www.imsteel.com
Iron Works Enterprises Inc
3901 Pennebaker AvenueBardstown, KY 40004
502-348-4001
Fabrication, industrial maintenance and repair. Structural steel erection.
Full-time Employment: 8
Contact: Mr. Todd Durbin, Owner
NAICS Codes: 238120
(2015)
2008Established:
ITW Powertrain Fastening
ITW Powertrain Metals
2001 Buck LnLexington, KY 40511-1074
859-255-6400
Metric screws, fastener assemblies and suspension end links
Full-time Employment: 84
Contact: Mr. Tim Swanson, Genl Mgr/VP
NAICS Codes: 326199, 332722, 333514, 336310, 336330, 33639
(2015)
1956Established:
www.itwpf.com
J & K Tool
701 West Main StreetCampbellsville, KY 42718-9505
270-465-3449
Machine shop: general machining, tool & die. Parts for various local busnisses.
Full-time Employment: 4
Contact: Mr. John Hedgespeth, Owner/VP
NAICS Codes: 332710, 333514
(2014)
1992Established:
J R Buck Industries
600 Adcolor DriveLexington, KY 40511
859-288-7543
Custom metal fabrication services: MIG & TIG welding, CNC milling & turning, Stamping and die building, engineering & design services, and assemblies. We excel in low to medium production orders.
Full-time Employment: 8
Contact: Mr. James Buck, Pres
NAICS Codes: 332119, 332439, 332710, 332999, 333514, 33392
(2014)
2006Established:
www.jrbuckindustries.com
12/29/2015 Page 19 of 47
J R Hoe & Sons Inc
N 19th StMiddlesboro, KY 40965
606-248-5560
Iron castings, gray and ductile; pattern tooling services; CNC machined castings; prototypes; metal fabrications-steel, stainless and aluminum; AISC structural and miscellaneous; autoCAD design and engineering.
Full-time Employment: 59
Contact: Mr. Harry H. Hoe, Pres
NAICS Codes: 331511, 332312, 332710, 332721
(2015)
1909Established:
PO Box 1737Middlesboro, KY 40965-3737
www.jrhoe.com
Jackson Tool & Mold LLC
1853 Petersburg RdHebron, KY 41048-9506
859-586-8242
Tool & mold, CNC machining, large or small machine parts run production
Full-time Employment: 4
Contact: Ms. Wanda Jackson, Owner
NAICS Codes: 326199, 333318, 333514
(2014)
1982Established:
Jay Gee Manufacturing
Div Griffin Industries Inc
191 Bradford RoadButler, KY 41006-9675
859-472-7511
Machine shop: drilling & boring, arc, gas, MIG & TIG welding; sheet, plate & structural metal fabricating
Full-time Employment: 34
Contact: Mr. Daniel Ferguson, Genl Mgr
NAICS Codes: 332312, 332313, 332710
(2015)
1971Established:
www.darlingii.com
Jennmar of Kentucky Inc
Div Jennmar Corp
271 Gawthrop DrWinchester, KY 40391-8910
859-744-9600
Ground control products for mining and tunneling made out of flat and round stock steel.
Full-time Employment: 80
Contact: Ms. Melissa Cockrell, HR Mgr
NAICS Codes: 332312, 336510
(2015)
1981Established:
PO Box 501Winchester, KY 40392-0501
www.jennmar.com/
Jennmar of West Kentucky Inc
860 Sandcut RdEarlington, KY 42410
270-383-3171
Manufacture steel roof support systems used in underground mining and tunneling
Full-time Employment: 69
Contact: Mr. Jeff Reeves, Sls Mgr
NAICS Codes: 332312, 332722
(2015)
2006Established:
www.jennmar.com
Jero Inc
7430 Empire DrFlorence, KY 41042
859-342-5858
Stub ends, buttweld pipe fittings, 1/2' thru 60", stainless steel, high nickel alloys, aluminum, copper nickel; also custom machining, Non Destructive Testing (NDT) X-Ray, Ultrasonic. Alloy Identifacation, Rockwell hardness testing.
Full-time Employment: 29
Contact: Mr. Donnie Boyers, Pres/Owner
NAICS Codes: 332996
(2013)
1976Established:
www.jeroinc.com
12/29/2015 Page 20 of 47
JMS Russel Metals Corp
1455 Bloom AvePaducah, KY 42001-7058
270-575-0308
Metal sales, processing, distributing & light manufacturing, mainly sawing & burning
Full-time Employment: 42
Contact: Mr. Dan Bailey, Regl Mgr
NAICS Codes: 331221
(2014)
1999Established:
www.jmsmetal.com
Jones Ornamental Iron
10115 Tom Jones DriveRush, KY 41168
606-928-6909
Structural steel, ornamental & structural iron fabricating; arc welding. Custom made swing or slide gates.
Full-time Employment: 2
Contact: Mr. Thomas G. Jones, Owner
NAICS Codes: 332312, 332323, 811310
(2014)
1946Established:
PO Box 196Rush, KY 41168
www.jonesornamentaliron.com
Karr Industries Inc
1170 Young Cemetery RdCorbin, KY 40701-8883
606-528-8757
Machine shop: tool & die; machinery parts; tool and die manufacturing replacement parts for local manufacturers
Full-time Employment: 8
Contact: Mr. Rondal Karr, Pres
NAICS Codes: 332710, 333318, 333514
(2015)
1981Established:
Ken-Tron Mfg Inc
610 Industrial DrOwensboro, KY 42301-0187
270-684-0431
Wire drawing & precision stampings for aerospace, electronics, battery, medical, automotive and television products.
Full-time Employment: 67
Contact: Mr. Robert Hudson, Chairman
NAICS Codes: 331222, 332119
(2015)
1960Established:
PO Box 21250Owensboro, KY 42304-1250
www.ken-tron.com
Kentuckiana Curb Co/KCC International Inc
2716 Grassland DrLouisville, KY 40299-2526
502-491-9880
Metal components, roof curbs, manufacture of retrofit air condition for restaurant industry,and high efficency HVAC commercial units
Full-time Employment: 217
Contact: Mr. Albert Fiorini, Pres
NAICS Codes: 332999
(2015)
1987Established:
www.kcccurbs.com
Kentucky Advanced Forge LLC
596 Triport RoadGeorgetown, KY 40324-9529
502-863-3646
Forged bearing components
Full-time Employment: 59
Contact: Mr. Jim Spurlock, Plant Mgr
NAICS Codes: 332111
(2015)
2002Established:
Kentucky Electric Steel
2704 South Big Run RdAshland, KY 41102-2119
606-929-1200
Steel flat bars and round bars
Full-time Employment: 149
Contact: Mr. John Scheel, Genl Mgr
NAICS Codes: 331110
(2014)
2004Established:
PO Box 2119Ashland, Ky 41105-2119
www.kentuckyelectricsteel.com
12/29/2015 Page 21 of 47
Kentucky Machine & Tool Co
3107 Millers LnLouisville, KY 40216-5345
502-774-5733
Machine shop: general & CNC machining, repairing, tool & die, jigs & fixtures, welding, drilling, boring, cutting, honing, lathe & mill work
Full-time Employment: 16
Contact: Mr. Maurice Meisner, Ch of Bd
NAICS Codes: 332710, 333514
(2014)
1925Established:
Kentucky Mountain Industries
200 Industrial Park RdManchester, KY 40962
606-598-8641
Cold rolled, brass, CRS & stainless steel automotive stampings; plumbing fixtures & appliance parts, other types of metals stampings; tool & die. Outsourcing capabilities of: coating, plating (decorative and functional), deburring.
Full-time Employment: 20
Contact: Mr. Jimmy Chesnut, Pres
NAICS Codes: 332119, 332913, 333514, 336370
(2014)
1977Established:
PO Box 368Manchester, KY 40962-0368
www.kmi-inc.net
Kentucky Ornamental Iron
1047 Goodwin DrLexington, KY 40505-3809
859-255-7791
Architectural metal, brass, aluminum & ornamental iron products, entrance gates, railings & spiral staircases, fencing
Full-time Employment: 5
Contact: Mr. Brad Ellis, Owner/Pres
NAICS Codes: 332323
(2015)
1961Established:
www.kentuckyornamentaliron.com
Kentucky Steel Center Inc
Sub Nippon Steel and Sumikin Bussan Corp
1101 Mayde RdBerea, KY 40403-9723
859-986-0572
Steel service center: coil slitting and steel sheets
Full-time Employment: 51
Contact: Mr. Seiji Motoni, Pres
NAICS Codes: 423510
(2014)
1996Established:
www.kentuckysteel.com
Kerco Inc
1671 Progress DriveMadisonville, KY 42431
270-821-2889
Mining equipment, parts, and service, custom fabricator
Full-time Employment: 18
Contact: Mr. Chuck Reed, CEO
NAICS Codes: 332312, 332313
(2015)
1963Established:
P.O. BoxMadisonville, KY 42431
www.kerco.net
Kevil Tool & Machine MFG Inc
668 Veterans AveKevil, KY 42053
270-462-2178
Machine shop: general & CNC machining, drilling, boring, cutting, tool & die
Full-time Employment: 10
Contact: Mr. Paul R. Owen, Pres
NAICS Codes: 332710, 333514
(2014)
1969Established:
PO Box 190Kevil, KY 42053-0190
www.keviltoolandmachine.com
12/29/2015 Page 22 of 47
KI (USA) Corporation
Sub Keiaisha Co Ltd
501 Mayde RdBerea, KY 40403-8730
859-986-1420
Machined, metal stamped & cationic painted automotive parts & components, arc & resistance welding
Full-time Employment: 120
Contact: Mr. Shigeru Oi, Pres
NAICS Codes: 332999, 336370, 336390
(2014)
1989Established:
www.kiusa.com
Kintec LLC
5801 Haunz LnLouisville, KY 40241-1407
502-241-9456
Wooden roof & floor trusses, light gauge steel trusses
Full-time Employment: 18
Contact: Mr. Keith E. Kinser, Pres
NAICS Codes: 321214, 332312
(2014)
1976Established:
PO Box 587Pewee Valley, KY 40056-0587
www.kintectruss.com
Knight's Mechanical LLC
4250 Leitchfield RdCecilia, KY 42724-9642
270-765-4141
Process piping, sheet metal fabrication, industrial welding, steel fabrication, equipment setup, design build, and bid projects
Full-time Employment: 110
Contact: Mr. John Knight, Pres
NAICS Codes: 332322, 332710, 423510, 811310
(2014)
1980Established:
www.knightsmechanical.com
Lawless Welding Inc
938 W Steve Warriner DrRussell Springs, KY 42642-4542
270-866-5416
Arc, gas, MIG, TIG, heliarc & aluminum welding; structural steel fabricating; cutting & shearing; weldments; fuel oil tank distributor. Manufacture of recycling trailers.
Full-time Employment: 12
Contact: Mr. Gene V. Smith, Pres
NAICS Codes: 332312, 332313, 811310
(2014)
1954Established:
www.lawlesswelding.com
LB Manufacturing
360 Industry DrSpringfield, KY 40069-1506
859-336-0090
Robotic and manual MIG welding of carbon and stainless steels, resistance (spot) welding, resistance seam welding, automotive glass assembly, light and medium stamping
Full-time Employment: 92
Contact: Mr. Dwayne Hogan, Plant Mgr
NAICS Codes: 333514
(2013)
1998Established:
PO Box 232Springfield, KY 40069-0232
www.leanbmfg.com
Legacy Mold & Tool Inc
4525 Springfield RdBardstown, KY 40004-8948
502-348-8151
Tool & die: plastic injection molds, jigs & fixtures
Full-time Employment: 2
Contact: Mr. Gary Proctor, Pres
NAICS Codes: 326199, 333511, 333514
(2015)
1997Established:
Lesco Design & Manufacturing Co Inc
1120 Fort Pickens RdLa Grange, KY 40031-9213
502-222-7101
Steel fabricators: conveyors, cranes and related material handling equipment and vehicle loading ramps
Full-time Employment: 100
Contact: Mr. Lance Kaufman, CEO
NAICS Codes: 332311, 332312, 333922
(2014)
1961Established:
www.lesco-design.com
12/29/2015 Page 23 of 47
Lily Gate Co
735 Loop RdHustonville, KY 40437-9015
606-346-4403
Metal farm gates; farm related, feeding facilites
Full-time Employment: 3
Contact: Ms. Nell Duggins, Secy
NAICS Codes: 332323
(2015)
1991Established:
www.lilyfarmgate.com
Lincoln Tool Inc
200 Commerce PkwyHodgenville, KY 42748-9400
270-358-9698
Precision tool & die manufacturing. Build special machines to manufacturing specs. Build molds and repair machines and parts
Full-time Employment: 6
Contact: Mr. Otto Woodall, Owner/Pres
NAICS Codes: 333514, 333999
(2015)
1994Established:
Logan Corporation
740 Honeybranch Industrial ParkDebord, KY 41214
606-298-2000
Metals service center: steel cutting, slitting, shearing, burning, forming and braking. Mining supplies for surface and underground. Fire suppression installations and service, custom dumptruck body manufacturing
Full-time Employment: 38
Contact: Mr. Zachary M. Taylor, Pres
NAICS Codes: 332322, 423510
(2015)
1938Established:
www.logancorp.com
Louisville Ladder Inc
7765 National TurnpikeUnit 190Louisville, KY 40214
502-636-2811
Corporate headquarters and distribution center. Louisville Ladder Inc is a wholesale distribution of ladders and related climbing products to retailers and industrial users.
Full-time Employment: 75
Contact: Mr. Ricardo Clausse, Pres
NAICS Codes: 326199, 332999, 551114
(2015)
1946Established:
www.louisvilleladder.com
Louisville Metal Hose
Air Hydro Power Inc
2550 Blankenbaker ParkwayLouisville, KY 40299-2467
502-361-2300
Specialized industrial distributor and local fabrication of industrial hose, metal hose, teflon hose, expansion joints, industrial belting: specialists in application of fluid
Full-time Employment: 19
Contact: Mr. Thomas McGuire, VP/Owner
NAICS Codes: 326299, 332439, 332999, 493110
(2014)
1989Established:
PO Box 34170Louisville, KY 40232-4170
www.airhydropower.com
Lucas Equine Equipment Inc
4161 US Highway 27 SCynthiana, KY 41031
859-234-6920
Wood & metal farm gates; steel & wood horse barn window grills, doors & stall fronts
Full-time Employment: 30
Contact: Mr. Mike Ravenscraft, Pres
NAICS Codes: 321911, 332323
(2015)
1981Established:
PO Box 158Cynthiana, KY 41031-0158
www.lucasequine.com
M & M Manufacturing Inc
709 Sportsman Lake RdFranklin, KY 42134-7659
270-586-8208
Custom metal, aluminum and stainless steel fabricating for water and sewer industries
Full-time Employment: 10
Contact: Ms. Jennifer McBride, Pres
NAICS Codes: 332322, 332999
(2015)
1998Established:
12/29/2015 Page 24 of 47
M C Steel and Crane Service Inc.
2 Braco Int. Blvd.Wilder, KY 41076
859-781-8600
Steel service center; products: I-beams, columns, rebar, mesh, drain tile and structural steel
Full-time Employment: 19
Contact: Mr. Michael Chilelli, Owner
NAICS Codes: 423510, 493110
(2015)
1980Established:
www.mcsteel.com
M M I of KY
2081 Mercer RdLexington, KY 40511-1018
859-255-0070
Distributor of imbedded concrete accessories for the commercial/ industrial and highway construction industry. Full line fabricator of concrete reinforcing steel (rebar).
Full-time Employment: 24
Contact: Ms. Megan Faircloth, Pres
NAICS Codes: 332312, 493110
(2014)
1989Established:
www.cmcmmi.com
Madison Tool & Die Inc
145 Orchard StRichmond, KY 40475-1638
859-623-2680
Tool and die making; welding jigs and fixtures.
Full-time Employment: 4
Contact: Mr. Gary Rose, Pres
NAICS Codes: 332119, 333514
(2014)
1978Established:
PO Box 57Richmond, KY 40476-0057
Mainstream Packaging Inc
650 Hendrickson DriveLebanon, KY 40033
270-692-4640
Metals service: material handling and manufacturer of steel returnable containers for auto industry
Full-time Employment: 18
Contact: Mr. Fredrick Clark, Owner
NAICS Codes: 332439, 423510
(2014)
2001Established:
www.mainstreamfabrication.com
Marine Systems Inc
4036 Clarks River RoadPaducah, KY 42003
270-444-0069
Machine shop: drilling, boring, cutting, honing, lathe & mill work, general machining, steel fabricating, arc & gas welding. Repair and rebuild diesel and high speed engines. Marine repair facility & authorized parts distributor/dealer.
Full-time Employment: 53
Contact: Mr. Thomas W. Bottoms, Vice Pres
NAICS Codes: 332312, 333318, 811310
(2014)
1984Established:
P O Box 3430Paducah, KY 42002-3430
www.marinesystemsinc.com
Marmon/Keystone Corp
1155 Victory PlaceHebron, KY 41048-8294
859-586-4000
Steel service center: metal cutting
Full-time Employment: 12
Contact: Mr. Frankie Krouse, Opers Mgr
NAICS Codes: 423510
(2014)
N/AEstablished:
www.marmonkeystone.com
Mayes Coatings & Insulation Inc
6082 Peters-London RoadReed, KY 42451
270-826-8584
Manufacturer of insulation systems for ground storage tanks, insulation panel installer. Ridglok Panel insulation systems for storage tanks.
Full-time Employment: 10
Contact: Mr. Bob Mayes, CEO
NAICS Codes: 332312
(2015)
2004Established:
www.mayescoatings.com
12/29/2015 Page 25 of 47
McElroy Metal Inc
Div McElroy Metal Mill Inc
9435 Highway 60Lewisport, KY 42351
270-295-3196
Metal forming, panel, trim, accessories
Full-time Employment: 17
Contact: Mr. Ian McElroy, Pres
NAICS Codes: 332312, 332322
(2014)
1964Established:
www.mcelroymetal.com
Mercer Tool & Die Inc
100 Morgan Soaper RdHarrodsburg, KY 40330-1056
859-734-0303
Tools, dies, jigs & fixtures; machine shop: general machining, drilling, boring, cutting, honing, grinding, electric welding, mill & lathe work
Full-time Employment: 3
Contact: Mr. Robert Collier, Pres
NAICS Codes: 332710, 333511, 811310
(2014)
1994Established:
Merrick Construction Co Inc
Sub Multi Industries
3808 Ralph AveLouisville, KY 40211-2037
502-449-1234
Sheet, ornamental & structural metal fabricating
Full-time Employment: 65
Contact: Mr. William Merrick, Pres
NAICS Codes: 332312, 332322, 332439
(2013)
1902Established:
PO Box 185Louisville, KY 40201-0185
www.merrick-kemper.com
Metal Solutions Design & Fabrication LLC
215 Main StreetDayton, KY 41074
859-282-5000
Manufacture DOT certified metal containers for nuclear waste & other hazardous products. Reusable shipping containers, airport ground support equipment, ornamental & architectural metal work.
Full-time Employment: 28
Contact: Mr. David Berger, Genl Mgr
NAICS Codes: 238120, 332322, 332439, 332999, 541712
(2015)
2005Established:
www.msdf1.com
Metals N More Inc
1040 Old Barren River RoadBowling Green, KY 42101-5000
270-781-3642
Metal manufacturing, fabricating, and merchant wholesales, machinery welding
Full-time Employment: 9
Contact: Mr. Malcolm Cherry, Owner
NAICS Codes: 332710, 423510
(2015)
2004Established:
www.metalsnmore.com
Metalworks Recycle-Reload LLC
199 Mitch McConnel DriveBowling Green, KY 42101
270-282-2400
Processing, packaging, shipping, receiving, and purchasing of all types of non-ferrous metals
Full-time Employment: 11
Contact: Mr. David Bradford, Pres
NAICS Codes: 423510
(2014)
2010Established:
Metcalf Metal Inc
3324 Irvine RoadRichmond, KY 40475
859-369-3133
Steel fabrication, mfg. farm equipment, trailer sales & repairs
Full-time Employment: 5
Contact: Mr. Mark Metcalf, Bus Mgr
NAICS Codes: 332312, 333111, 811310
(2015)
1961Established:
12/29/2015 Page 26 of 47
Mid American Metals Company
616 Bark CoveOwensboro, KY 42303-0605
270-926-3515
Metal recovery, automotive computers and mass air flow sensors;
Full-time Employment: 5
Contact: Mr. Paul Busse, Owner
NAICS Codes: 423140, 423510
(2014)
1987Established:
Mid-America Machine Inc
92 Pioneer Industrial DrMayfield, KY 42066-9056
270-247-6909
Machine shop: cylindrical grinding, lathe & mill work, small plate & structural metal fabricating & hard chrome plating
Full-time Employment: 30
Contact: Mr. Paul Crowell, Owner/Pres
NAICS Codes: 332312, 332313, 332710
(2015)
1987Established:
PO Box 483Mayfield, KY 42066-0483
www.midamericamachine.com
Midwest Steel Contractors
500 Industrial RdMurray, KY 42071-2195
270-753-0521
Steel structural fabricating; arc, gas, MIG, TIG & heliarc welding & steel erection
Full-time Employment: 1
Contact: Mr. Donald Wisecup, Owner
NAICS Codes: 332312, 811310
(2015)
1968Established:
PO Box 1308Murray, KY 42071-1308
Mike Alexander Dies Inc
1134 W Kentucky StLouisville, KY 40210-1345
502-515-2777
Steel rule cutting dies flat & rotary-male & female stripping tools-male & female blanking tools-steel counters-flexographic platemaking; water jet cutting
Full-time Employment: 22
Contact: Mr. Michael Alexander, Pres
NAICS Codes: 333514
(2014)
1984Established:
www.madies.com
Miles Enterprises LLC
2740 Keller RoadOwensboro, KY 42301-2919
270-926-2420
HQ; Service, sell, construct grain bins, tire shop
Full-time Employment: 20
Contact: Mrs. Debra Seymour, Pres
NAICS Codes: 236220, 423390, 551114
(2014)
1995Established:
PO Box 22919Owensboro, KY 42304
Millennium Forge Inc
990 W Ormsby AveLouisville, KY 40210-1888
502-635-3350
Steel forging & fittings for valve & OEM use, custom forging-raw.Tool and Die Shop
Full-time Employment: 95
Contact: Mr. Dan Gonring, Plant Mgr
NAICS Codes: 332111, 332919, 333514
(2014)
2000Established:
990 W Ormsby AveLouisville, KY 40210
www.millenniumforge.com
MISA Metal Fabricating Inc
MMFI
7101 International DriveLouisville, KY 40258-2832
502-933-5555
Steel processing and fabrication: plate steel cutting, machining, bending, forming, welding and CNC machining.
Full-time Employment: 160
Contact: Mr. Mike Talis, Pres
NAICS Codes: 332999, 423510
(2014)
1989Established:
www.misametalfab.com
12/29/2015 Page 27 of 47
MISA Metal Processing Inc
7300 Global DrLouisville, KY 40258-1982
502-937-0505
Steel processing and coil slitting for material owned by our customers.
Full-time Employment: 37
Contact: Mr. Gene Miller, Genl Mgr
NAICS Codes: 423510
(2015)
1996Established:
www.misteel.com
Mitchell Hobbs & Sons Inc
3100 Vermont AveLouisville, KY 40211-3344
502-778-7344
Custom stainless steel & sheet metal erecting & fabricating
Full-time Employment: 5
Contact: Mr. David Hobbs, Pres
NAICS Codes: 332322, 332999
(2015)
1962Established:
www.mhobbsandsons.com
Miyama USA Inc
Miyama Kogyo Co Ltd
7081 International DrLouisville, KY 40258-2865
502-933-4100
Automotive and appliance sub-assemblies, 6 axis precise robotic welding, stamping, precise resistance welding, CNC drill & tap, CNC lathing, parts kit packaging & fulfillment services
Full-time Employment: 49
Contact: Mr. Mark Koeberlein, Genl Mgr
NAICS Codes: 332999, 339999, 561910
(2015)
1989Established:
www.miyamausa.com
Modern Welding Co of Kentucky Inc
Div Modern Welding Co Inc
303 Steel DrElizabethtown, KY 42701-8135
270-769-1368
Structural metal manufacturing
Full-time Employment: 30
Contact: Mr. James Prindle, VP/Genl Mgr
NAICS Codes: 332312, 332420, 811310
(2015)
1964Established:
PO Box 117Elizabethtown, KY 42702-0117
www.modweldco.com
Modern Welding Co of Kentucky Inc
Sub Modern Welding Co Inc
155 Bean Cemetery RdMadisonville, KY 42431-9678
270-821-3575
Custom structural steel & metal fabricating; arc & MIG welding
Full-time Employment: 22
Contact: Mr. Mike Eddings, VP/Genl Mgr
NAICS Codes: 332312, 811310
(2014)
1932Established:
PO Box 1147Madisonville, KY 42431-8147
www.modweldco.com
Modern Welding Co of Owensboro
Sub Modern Welding Co Inc
1450 E Parrish AveOwensboro, KY 42303-0837
270-683-5323
Steel (cs & ss) storage tanks, pressure vessels & miscellaneous fabrication (10ga - 2" thick;<200,000#); steel forming including rolling, shearing, breaking and high-def (plasma only) burning; welding; warehouse steel sales. Headquarters.
Full-time Employment: 50
Contact: Mr. John Austin, VP/Genl Mgr
NAICS Codes: 332312, 332420, 551114
(2014)
1932Established:
PO Box 1450Owensboro, KY 42302-1450
www.modweldco.com
12/29/2015 Page 28 of 47
Montebello Packaging Inc
650 Industrial DrLebanon, KY 40033-1953
270-692-5760
Collapsible aluminum tubes and aerosol cans primarily for the pharmaceutical, cosmetic, and industrial industries.
Full-time Employment: 138
Contact: Mr. Dan Blakeman, Plant Mgr
NAICS Codes: 332999
(2015)
1999Established:
www.montebellopkg.com
Monticello Tool & Die Inc
218 Cardinal AveMonticello, KY 42633-2126
606-348-8104
Tool & die: jigs & fixtures
Full-time Employment: 20
Contact: Mr. Danny Morgan, Pres
NAICS Codes: 333514
(2014)
1978Established:
PO Box 148Monticello, KY 42633-0148
Morehead Machining Inc
25 Lake Park DriveMorehead, KY 40351-7984
606-783-1841
Tool & die: jigs, fixtures & progressive dies, welding/fabrication
Full-time Employment: 16
Contact: Mr. James W. Lewis, Pres
NAICS Codes: 333514
(2014)
1996Established:
www.moreheadmachining.com
Morris Tool & Plastics Inc
1383 Commonwealth DriveHenderson, KY 42420-4673
270-827-1181
Building and repair of plastic injection molds, including plastic injection molding and processing parts. ISO 9001 Certified.
Full-time Employment: 7
Contact: Mr. Richard Morris, Pres
NAICS Codes: 326199, 332710, 333511, 561499
(2014)
1989Established:
www.morristoolplatics.net
MST Steel Corporation of Kentucky
860 Withrow CtBardstown, KY 40004-4100
502-350-4100
Slitting & cold-reduction of steel coil
Full-time Employment: 15
Contact: Mr. Richard Thompson, Pres
NAICS Codes: 331110, 493110
(2015)
2001Established:
www.mststeel.com
Mubea Inc
6800 Industrial RdFlorence Campus OperationsFlorence, KY 41042
859-746-5300
Automotive component parts (springs, hose clamps, stabilizer
Full-time Employment: 1,400
Contact: Mr. Doug Cain, CEO
NAICS Codes: 331221, 332613, 336390
(2015)
1982Established:
www.mubea.com
Murray Mold & Die Co
506 Industrial RdMurray, KY 42071-2195
270-759-4851
Plastic injection & die cast molds & metal stampings; wire EDM & precision CNC machining
Full-time Employment: 10
Contact: Mr. Jerry B. Duncan, Pres
NAICS Codes: 326199, 333511
(2015)
1985Established:
www.murraymold.com
National Chimney KY
211 Windsor DrMt. Sterling, KY 40353
859-498-3537
Steel stove pipes & flexible cleaning lines
Full-time Employment: 12
Contact: Mr. Evan Havers, Mgr
NAICS Codes: 332996
(2015)
1990Established:
PO Box 798Mt Sterling, KY 40353
www.nationalchimneysupply.com
12/29/2015 Page 29 of 47
Neill-LaVielle Supply Co
Steel Warehouse Division
4575 Jennings LaneLouisville, KY 40218
502-456-2444
Steel distribution, metal processing
Full-time Employment: 14
Contact: Mr. Robert Wuetcher, Opers Mgr
NAICS Codes: 423510
(2014)
1954Established:
www.neill-lavielle.com
Niemco Fabricators Inc
1600 Northwestern PkwyLouisville, KY 40203-1454
502-584-7721
Steel and stainless steel fabricating with machine shop and 2 lasers.
Full-time Employment: 45
Contact: Mr. John Hodgin, Pres
NAICS Codes: 332312, 332710, 333922
(2015)
1983Established:
Nisshin Automotive Tubing LLC
107 Fieldview DriveVersailles, KY 40383-1532
859-879-6067
Stainless steel automotive tubing
Full-time Employment: 18
Contact: Mr. Satoshi Steve Migita, Pres
NAICS Codes: 331210
(2012)
2005Established:
Nooyen Manufacturing Inc
111 Adena DrMt. Sterling, KY 40353-9069
859-497-4429
Manufacture galvanized steel pig flooring
Full-time Employment: 9
Contact: Mr. Hubert Verhofstadt, Vice Pres
NAICS Codes: 332312
(2014)
1997Established:
www.nooyenky.com
North American Stainless
6870 Highway 42 EGhent, KY 41045-9615
502-347-6000
Stainless steel flat products - coils, sheets, strips, plates and stainless steel long products - bar, wire, rod, rebar, angles
Full-time Employment: 1,314
Contact: Mr. Cristobal Fuentes, Pres
NAICS Codes: 331110, 331221
(2015)
1990Established:
www.northamericanstainless.com
Nucor Steel Gallatin
4831 US Highway 42 WestGhent, KY 41045
859-567-3100
Flat rolled steel coils
Full-time Employment: 430
Contact: Mr. John Farris, VP Opers/GM
NAICS Codes: 331110, 331221
(2015)
1993Established:
www.nucorsteel.com
OCTA Inc
3603 Mattingly RdBuckner, KY 40010-8803
502-222-8985
Tube specialist - cutting, bending, forming, etc. (I.e., copper, aluminum, etc.); manufacturing of parts and assemblies for refrigeration, HVAC, etc.
Full-time Employment: 82
Contact: Ms. Joann Adams, Pres
NAICS Codes: 332999
(2014)
1987Established:
PO Box 217Buckner, KY 40010-0217
www.octainc.com
12/29/2015 Page 30 of 47
Olympic Steel Inc
Mt Sterling
3379 Owensville RdMt. Sterling, KY 40353
859-499-4188
Processing, machining, and handling of steel between producers and manufacturers
Full-time Employment: 65
Contact: Mr. Jeremy Thiessen, Genl Mgr
NAICS Codes: 423510
(2014)
2011Established:
175 Clarence DrMt Sterling, KY 40353
www.olysteel.com
Omni Materials Inc
Augusta, KY
Marketer of lime by-products, primarily used as road foundations
Full-time Employment: 10
Contact:
NAICS Codes: 423390
(announced)
2015Announced:
On Time Fab Inc
3021 Medley RoadOwensboro, KY 42301
270-686-0105
Steel fabrication
Full-time Employment: 22
Contact: Mr. Ray Middleton, Pres
NAICS Codes: 332999
(2014)
2007Established:
Owensboro Manufacturing LLC
3001 Tamarack RdOwensboro, KY 42301-6565
270-729-4242
Metal stampings, production machining, & fabricated metal products
Full-time Employment: 35
Contact: Mr. Kevin Booth, Pres
NAICS Codes: 332119, 332721, 333514
(2014)
1999Established:
PO Box 1598Owensboro, KY 42302
www.TheHinesGroup.com
PEBCO Inc
Manufacturing
3885 Coleman RoadPaducah, KY 42001
270-442-1996
Manufactured/fabricated metal products & equipment used for bulk materal handling
Full-time Employment: 25
Contact: Mr. Thomas Scott, Pres/CEO
NAICS Codes: 332999, 333922
(2014)
2004Established:
PO Box 7506Paducah, KY 42002-7506
www.pebco.com
Perfect Patterns Central Inc
3841 Vincent Station DrOwensboro, KY 42303-9315
270-683-3930
Wood, metal & plastic industrial patterns, dies and molds.
Full-time Employment: 8
Contact: Mr. Greg Van Nuland, Plant Mgr
NAICS Codes: 332999
(2014)
1998Established:
www.perfectpatterns.com
Phillips Diversified Mfg Inc
80 Carpenter DrJackson County Industrial ParkAnnville, KY 40402
606-364-2750
Metal fab and assembly, mechanical and electronic assembly, vacuum form molding and metal fabrication
Full-time Employment: 42
Contact: Ms. Donna Bray, Persnl Mgr
NAICS Codes: 332312
(2014)
1994Established:
PO Box 250Annville, KY 40402-0250
www.phillipsdminc.com
12/29/2015 Page 31 of 47
Phoenix Products Inc
106 Bethford RdMcKee, KY 40447
606-965-3333
Metal and composite products for the military, and upholstery products, metal bending and manufacturing
Full-time Employment: 31
Contact: Mrs. Peggy Wilson, CEO
NAICS Codes: 332510, 332710, 332999, 335991, 336413, 54151
(2014)
1995Established:
www.acstuff.com
Piccola Manufacturing Co
985 Old Preston Hwy SShepherdsville, KY 40165-5455
502-955-8299
Materials handling equipment: racks; shipping containers, custom steel, stainless steel & aluminum fabricating & robotic welding, laser cutting
Full-time Employment: 45
Contact: Mr. Richard A. Eschman, Pres
NAICS Codes: 332312, 332322, 332999
(2015)
1950Established:
PO Box 705Shepherdsville, KY 40165-0705
www.piccolamfg.com
Pilot Steel Inc
2301 Triad DriveOwensboro, KY 42301
270-684-8030
Fabricated structural steel
Full-time Employment: 30
Contact: Mr. Ray Assmar, Owner
NAICS Codes: 332312
(2015)
2002Established:
www.pilotsteel.com
Piper's Saw Shop Inc
454 Philliip Stone WayCentral City, KY 42330-1507
270-754-2354
Saw blades & sharpening service
Full-time Employment: 30
Contact: Mr. Jimmy Piper, Pres
NAICS Codes: 332216, 811310
(2014)
1989Established:
PO Box 30Central City, KY 42330-0030
www.piperssawshop.com
P-K Tool & Manufacturing Co
300 Duncannon LnRichmond, KY 40475-9603
859-623-0300
Metal stampings, production machining, fabricating & assembly; complete stamping die construction; nylor dip coating; robotic & resistance welding.
Full-time Employment: 40
Contact: Mr. Darrin Nunley, Plant Mgr
NAICS Codes: 332119, 333514, 336370
(2014)
1994Established:
www.pktool.com
Plastisud
95 Industrial Park RoadMount Vernon, KY 40456
606-256-1947
Tools & dies, plastic injection & thermoform molds
Full-time Employment: 24
Contact: Mr. Laurent Buzzo, Pres
NAICS Codes: 333511
(2014)
1989Established:
PO Box 3109Mount Vernon, KY 40456
www.plastisud.com
12/29/2015 Page 32 of 47
Plymouth Engineered Shapes
Div Plymouth Tube Co
201 Commerce CtHopkinsville, KY 42240-9200
270-886-6631
Stainless, carbon & alloy steel extrusions; special & structural titanium & nickel base shapes
Full-time Employment: 122
Contact: Mr. David Crouch, Genl Mgr
NAICS Codes: 331221, 331491, 332510
(2014)
1980Established:
www.plymouth.com/extrusions
Porter Steel & Fabrication Inc
8488 Rt 1428Allen, KY 41601
606-874-2129
Develops and constructs specialized metal and steel structures, equipment; material handling products; steel products and fabrication for mining and aggregate industry.
Full-time Employment: 5
Contact: Mr. Frank Porter, Pres
NAICS Codes: 332312, 423990
(2015)
1996Established:
PO Box 358Allen, KY 41601-0358
Portland Forge
Div of Allegheny Technologies Co
400 Corporate DrLebanon, KY 40033
270-692-3554
Custom impression steel die forgings for truck & farm machinery industries
Full-time Employment: 101
Contact: Mr. Greg Drane, Opers Mgr
NAICS Codes: 332111
(2014)
1990Established:
PO Box 674Lebanon, KY 40033-0674
www.portlandforge.com
Powerhead Machine Inc
125 Charlie Norris RoadRichmond, KY 40475
859-369-5154
Factory services/steel fabrication/sales
Full-time Employment: 1
Contact: Mr. Harold Bingham, Pres
NAICS Codes: 332312, 332710
(2014)
1971Established:
Precision Machine Inc
1231 S 3rd StPaducah, KY 42003-1611
270-443-8444
Machine shop: industrial repairing, metal & plastic fabricating, arc & gas welding, millwright services
Full-time Employment: 80
Contact: Mr. Buel Alexander, Pres
NAICS Codes: 332312, 332710, 336611
(2015)
1964Established:
PO Box 2753Paducah, KY 42002-2753
www.precisionmachineinc.com
Precision Steel LLC
6062 Industrial ParkwayCalvert City, KY 42029
270-395-5665
AISC and ASME certified. We have blasting and painting facilities for sophisticated paint systems. We build structural steel buildings, large/heavy custom fabrications such as bag-houses, ductwork, pressure vessels, tanks, and barges.
Full-time Employment: 25
Contact: Mr. Brent Wyatt, CEO
NAICS Codes: 332312, 332313, 332410, 332420, 332999
(2014)
2001Established:
PO Box 1465Calvert City, KY 42029
www.precisionsteelonline.com
12/29/2015 Page 33 of 47
Precision Strip Inc
Plt 3
4001 Hardison RdWoodburn, KY 42170
270-542-6100
Steel, aluminum & copper processing & slitting service
Full-time Employment: 105
Contact: Mr. Nick Moorman, Genl Mgr
NAICS Codes: 331110, 331314, 561439
(2014)
1994Established:
4001 Hardison RdWoodburn, KY 42170
www.precision-strip.com
Precision Tube Inc
1025 Fortune DriveRichmond, KY 40475
859-623-5595
Tube fabricating, wire forming, forklift components and CNC machining
Full-time Employment: 63
Contact: Mr. Mark Gentry, Pres
NAICS Codes: 332618, 332710, 332996
(2014)
1979Established:
www.ptube.net
Pride Industries Inc
14432 State Route 141 SouthPride, KY 42404-7310
270-333-9552
Steel & aluminum standing seam roofing, preformed metal shingles.
Full-time Employment: 28
Contact: Mr. Luke Pride, Pres
NAICS Codes: 331221, 331318
(2014)
1978Established:
14432 State Route 141 SouthClay, KY 42404-7310
www.prideindinc.com
Progress Rail Services Corp
11209 Electron DrLouisville, KY 40299
800-741-7112
Structural steel & aluminum fabricating; railroad signal equipment, electronic enclosures
Full-time Employment: 53
Contact: Mr. Benjamin Stamford, Plant Mgr
NAICS Codes: 332312, 332322, 336510
(2014)
1972Established:
www.progressrail.com
PTC Seamless Tube Corp
500 Frank Yost LnHopkinsville, KY 42240-6817
Produce seamless steel tubes for the energy industry, such as oil country tubular goods (OCTGs), which include high strength tube products used in oil and gas wells and certain other industrial applications.
Full-time Employment: 283
Contact:
NAICS Codes: 331210
(announced)
2013Announced:
Quality Fabrication Inc
555 Brown LaneMadisonville, KY 42431
270-824-9791
Machine shop: general, CNC lathe, & mill machining, sheet, plate, ornamental & structural metal fabricating
Full-time Employment: 17
Contact: Mr. Dale Holt, Pres
NAICS Codes: 332312, 332313, 332710, 333318
(2015)
1982Established:
Quality Tooling Inc
14228 US Highway 41-ACorydon, KY 42406-9701
270-533-9263
Tools, steel dies, jigs & plastic injection molds
Full-time Employment: 21
Contact: Mr. J. Michael Alvey, Pres
NAICS Codes: 333514
(2014)
1968Established:
www.qualitytoolinginc.com
12/29/2015 Page 34 of 47
R & S Godwin Truck Body Co LLC
5168 S US Hwy 23Ivel, KY 41642
606-874-2151
Steel & aluminum fabricating: dump truck bodies & trailers
Full-time Employment: 85
Contact: Mr. James Godwin Sr, Owner/Mgr
NAICS Codes: 332312, 332322, 336211
(2015)
1968Established:
PO Box 420Allen, KY 41601-0420
www.rstruckbody.com
R C Bratcher Welding Service
Radiator & Automotive
2386 Windhaven DrOwensboro, KY 42303-0955
270-684-5256
Arc, heliarc, MIG & TIG welding; custom metal fabricating; radiator service and sales, automotive repair shop
Full-time Employment: 9
Contact: Mr. Gary Bratcher, Pres/Owner
NAICS Codes: 332322, 332999, 811310
(2014)
1992Established:
PO Box 1943Owensboro, KY 42302-1943
www.rcbratcher.com
Republic Conduit Manufacturing
7301 Logistics DriveLouisville, KY 40258
800-840-8823
Republic ConduitTM is a domestic producer of EMT, IMC, and rigid electrical steel conduit. Republic Conduit is an ISO 9001:2008, ISO 14000, ISO 18000 and UL certified company.
Full-time Employment: 188
Contact: Mr. Joost Grubben, Pres
NAICS Codes: 331210
(2014)
2006Established:
www.republicconduit.com
Revere Packaging LLC
39 Pearce Industrial RdShelbyville, KY 40065-8125
502-633-1404
Aluminum foil containers & plastic dome food covers
Full-time Employment: 51
Contact: Mr. J. P. Wherry, Pres
NAICS Codes: 326199, 332999
(2014)
1967Established:
www.reverepackaging.com
Riggs Machine & Fabricating Inc
3850 Belford StAshland, KY 41101-3144
606-324-0090
Machine shop: CNC, general machining; welding; mill & lathe work; sheet, plate, structural metal fabricating; industrial machine and parts repairing
Full-time Employment: 44
Contact: Mr. John Bert Riggs, Pres
NAICS Codes: 332312, 332313, 332710
(2014)
1981Established:
www.riggsmachine.com
Roll Forming Corp
1070 Brooks Industrial RdShelbyville, KY 40065-9141
502-633-4435
Headquarters; expertise in the design and production of roll formed products for a broad range of industries. From transportation and construction projects to renewable energy, aerospace, and everything in between.
Full-time Employment: 220
Contact: Mr. Ray Leathers, Pres
NAICS Codes: 332114, 332999, 551114
(2014)
1947Established:
PO Box 369Shelbyville, KY 40066-0369
www.rfcorp.com
12/29/2015 Page 35 of 47
Roller Die & Forming Co Inc
1172 Industrial BlvdLouisville, KY 40219-1889
502-969-1327
Custom roll formed metal shapes, tool & die for solar industry
Full-time Employment: 70
Contact: Mr. H. Ray Hammons, Pres
NAICS Codes: 331491, 332999, 333514
(2015)
1951Established:
www.rollerdie.com
Royster's Machine Shop LLC
215 US Highway 41 SHenderson, KY 42420-3850
270-826-3396
Machine shop: general & CNC machining, drilling, boring, cutting, honing, custom grinding, steel fabricating, arc & gas welding, lathe & mill work, production machining
Full-time Employment: 54
Contact: Mr. R. Michael Royster, Pres
NAICS Codes: 332312, 332710, 333318
(2015)
1975Established:
PO Box 1199Henderson, KY 42419-1199
www.roystersmachine.com
Ryerson Inc
920 Old Brunerstown RdShelbyville, KY 40065-9132
502-633-7770
Aluminum & stainless steel processing
Full-time Employment: 40
Contact: Mr. Edward Wawrzynski, Genl Mgr
NAICS Codes: 331492, 332439, 332999
(2014)
1990Established:
www.ryerson.com
S & S Tool & Die Inc
3290 Hathaway RdUnion, KY 41091-8112
859-384-4303
Machine shop: cutting, boring, drilling, honing, general machining, tool & die
Full-time Employment: 1
Contact: Mr. John D. Smith, Pres
NAICS Codes: 332710, 333514
(2014)
1991Established:
S & S Tool & Machine Co Inc
13045 Middletown Industrlal BlvdLouisville, KY 40223-4762
502-254-5401
Machine shop: CNC machining, production parts, gauges & checking fixtures
Full-time Employment: 25
Contact: Mr. George Copeland, Plant Mgr
NAICS Codes: 332710, 333514, 333515
(2015)
1993Established:
PO Box 23267Louisville, KY 40223-0267
S & S Tool & Machine Co Inc
910 N English Station RdLouisville, KY 40223-4730
502-245-3481
Machine shop: precision machined parts, gauges & fixtures
Full-time Employment: 37
Contact: Mr. Charles Siegel Jr, Pres
NAICS Codes: 333318, 333514, 333515
(2015)
1967Established:
PO Box 23267Louisville, KY 40223-0267
www.iglou.com/sstool
S & V Fabrication
1306 Pleasant Valley RdOwensboro, KY 42303-9619
270-684-9651
Steel, aluminum & stainless steel fabricating, mechanical contractors
Full-time Employment: 8
Contact: Ms. Jennifer Vogel, Pres
NAICS Codes: 332312, 332322, 332999, 811310
(2014)
1964Established:
www.sg-ky.com
12/29/2015 Page 36 of 47
Saturn Machine & Welding Co
223 N Willie Pride RdSturgis AirportSturgis, KY 42459
270-333-2104
Specialty machinery, structural jam cleaners & pollution control equipment; steel fabricating
Full-time Employment: 70
Contact: Mr. Billy C. Baird, Owner
NAICS Codes: 332312, 333249, 333413
(2014)
1964Established:
PO Box 69Sturgis, KY 42459-0069
www.saturnmachine.net
Schuler Machine and Tool Co
1500 S 10th StLouisville, KY 40210-2316
502-637-4700
Full-service steel fabrication facility with paint booth; laser and water jet cutting
Full-time Employment: 42
Contact: Mr. Kevin Schuler, Pres
NAICS Codes: 332119, 332312, 332313, 332812, 332999
(2014)
1983Established:
PO Box 37282Louisville, KY 40233-7282
www.schulermfg.com
Scott Heavy Equipment Inc
6100 Hanson RdMadisonville, KY 42431-6454
270-322-3316
Structural steel fabrications, conveyor structure, land mine clearing blade system, government contracting and manufacturer
Full-time Employment: 10
Contact: Mr. Dennis Scott, Pres
NAICS Codes: 332999, 336212, 336992
(2014)
1989Established:
www.scottheavyequipment.com
Service Tool & Die Inc
2323 S Green StHenderson, KY 42420-4395
270-827-9582
Tool & die
Full-time Employment: 37
Contact: Mr. Dwight Fruit, Pres
NAICS Codes: 333514
(2014)
1969Established:
www.servicetool.com
Shoreline Steel South LLC
450 South 16th StreetPaducah, KY 42003
270-444-0088
Roll forming of interlocking steel sheet piling
Full-time Employment: 10
Contact: Ms. Karri Quandt, Ofc Mgr
NAICS Codes: 331513
(2015)
2013Established:
PO Box 7207Paducah, KY 42002
www.shorelinesteel.com
Simiens Industry Inc
2400 Nelson Miller PkwyLouisville, KY 40223
502-618-8800
Railroad products & signal crossing equipment. Engineer control systems for railways and transit authorities.
Full-time Employment: 300
Contact: Mr. Kevin Riddett, CEO
NAICS Codes: 332999, 334290, 336510, 541330, 551114
(2015)
1972Established:
www.siemens.com
Siskin Steel & Supply Co Inc
7611 Port RoadLouisville, KY 40258
502-716-5140
Stainless steel, aluminum, carbon steel manufacturing.
Full-time Employment: 42
Contact: Mr. Tony Adkins, Div Mgr
NAICS Codes: 331110
(2015)
1900Established:
www.siskin.com
12/29/2015 Page 37 of 47
Six Sigma Inc
11901 Capital WayLouisville, KY 40299
502-267-6555
Hydraulic & electronic tooling systems
Full-time Employment: 40
Contact: Mr. Owen Thompson, Pres
NAICS Codes: 333514, 333996
(2014)
1985Established:
www.sixsigmausa.com
Somerset Tool & Die Corp
289 Northwood DriveSomerset, KY 42503-4518
606-423-3005
Machine shop: tools, dies, jigs & fixtures
Full-time Employment: 2
Contact: Mr. William L Burge, Pres
NAICS Codes: 333318, 333514
(2015)
1978Established:
Sonoco
Can Div
3100 Ohio DrHenderson, KY 42420-5045
270-827-5637
Aluminum Easy Open end, peelable membrane ends, and steel can ends
Full-time Employment: 116
Contact: Mr. Henry Mangum, Plant Mgr
NAICS Codes: 331318, 332431
(2014)
1967Established:
www.sonoco.com
Southeast Tube Inc
174 Roger Thomas RdCadiz, KY 42211-9766
270-522-0491
Carbon steel tube fabricating & bending
Full-time Employment: 6
Contact: Mr. Steve Parrent, Plant Mgr
NAICS Codes: 331210
(2014)
1997Established:
PO Box 1309Cadiz, KY 42211-1309
www.southeasttube.com
Southern Metal Products Co Inc
5516 Poplar Park BlvdLouisville, KY 40228-1073
502-966-3179
Structural steel fabricating and installation. Resaling joist & deck
Full-time Employment: 24
Contact: Mrs. Jesscia Clark, Pres
NAICS Codes: 332312
(2014)
1977Established:
PO Box 35245Louisville, KY 40232-5245
www.southernmetals.net
Southern Tent & Awning Co
539 E 3rd StLexington, KY 40508-1612
859-255-7772
Fabric and metal awnings, swimming pool covers, tents, tarpaulins, filter bags, industrial curtains, floor and field covers, tennis nets & backdrops; contract sewing.
Full-time Employment: 2
Contact: Mr. Barry Singer, Pres
NAICS Codes: 238190, 238990, 314910, 326199, 337920
(2014)
1906Established:
PO Box 395Lexington, KY 40588-0395
www.southerntentandawning.net
Spalding & Day Tool & Die Co
13040 Aiken RoadLouisville, KY 40223-4746
502-245-2283
Tools, dies, fixtures, gauges, nuts, brackets, appliance parts and military can tooling prototypes.
Full-time Employment: 41
Contact: Mr. Daniel L. Day, Pres
NAICS Codes: 333514
(2014)
1948Established:
www.spaldingday.com
12/29/2015 Page 38 of 47
Specialty Manufacturing
3331 Gilmore Industrial BlvdLouisville, KY 40213-2174
502-969-8609
Machine shop: general & CNC machining; custom metal fabricating; arc, gas, MIG & TIG welding; drilling, boring, cutting & honing; lathe & mill work, laser & press brake
Full-time Employment: 42
Contact: Mr. David Weyler, Pres
NAICS Codes: 332322, 332710, 332999
(2015)
1974Established:
www.smfgky.com
Specialty Wire Reel Inc
602 Gilbert StHopkinsville, KY 42240-1934
270-885-1925
Reels, spools & wire
Full-time Employment: 19
Contact: Mr. Thomas Watkins Jr., Pres
NAICS Codes: 332618, 332999
(2015)
1991Established:
Speedwell Tool & Die
1020 Speedwell RdRichmond, KY 40475
859-369-3932
Tool & die, custom molded dies
Full-time Employment: 1
Contact: Mr. James Crawford, Owner
NAICS Codes: 333514
(2015)
1984Established:
Stamler Machine Co Inc
828 S 17th StLouisville, KY 40210
502-585-1820
Machine shop; machine, welding, repairs and fabrication
Full-time Employment: 6
Contact: Mr. Gerald R Stamler, Pres
NAICS Codes: 332710, 332999, 811310
(2014)
1946Established:
www.stamlermachine.com
Stanley Black & Decker Corp
1251 Harry Long RdShelbyville, KY 40065-9139
502-633-5082
Professional power tool accessories - circular saw blades/reciprocating saw blades/ jig saw blades/ hole saws
Full-time Employment: 140
Contact: Mr. Craig Zielinski, Plant Mgr
NAICS Codes: 332216
(2013)
1977Established:
www.stanleyblackanddecker.com
Star Manufacturing Inc
1200 Russell Cave RoadLexington, KY 40505-3114
859-252-6741
Furniture mechanisms; metal stampings; jigs & fixtures; production & spot welding; surface, blanchard & production grinding, automotive parts
Full-time Employment: 130
Contact: Mr. Mark Stanley, Pres
NAICS Codes: 332119, 332510, 332999, 333514
(2015)
1995Established:
www.starmanufacturinginc.com
Steel Structural Products LLC
150 Rochester DrLouisville, KY 40214
502-368-4252
Roll formed steel framing components and light-gauge metal construction material
Full-time Employment: 38
Contact: Mr. Scott Stuckert, Pres
NAICS Codes: 331221
(2015)
2004Established:
PO Box 9427Louisville, KY 40209
www.steelstructuralproducts.com
12/29/2015 Page 39 of 47
Steel Technologies LLC
196 Shawnee DrEminence, KY 40019-1414
502-845-4202
Steel service center: steel rolling, annealing & slitting/ blanking of steel coils
Full-time Employment: 85
Contact: Mr. Joe Wright, Genl Mgr
NAICS Codes: 331221, 423510
(2013)
1971Established:
www.steeltechnologies.com
Steel Technologies LLC
3985 US HWY 42 WGhent, KY 41045
859-567-7502
Process flat rolled steel
Full-time Employment: 85
Contact: Mr. John Hollander, VP
NAICS Codes: 331221
(2014)
1995Established:
www.steeltechnologies.com
Steinkamp Molding LP
Mold and Tool
3436 Turfway RoadErlanger, KY 41018
859-647-1801
Design and production of industrial molds and tools, rubber and plastic injection molds, plastic blow molds, foam molds. Prototypes, parts, jigs, fixtures, robot end-of arm tooling. Precision high-speed CNC machining, EDM. Laser welding.
Full-time Employment: 23
Contact: Mrs. Brigitte Reinking
NAICS Codes: 332710, 332721, 333511, 333514
(2014)
1999Established:
www.steinkampmold.com
Stephens Pipe & Supply
2225 E Highway 619Russell Springs, KY 42642-7928
270-866-3331
Chain link fence, industrial gates, dog kennels
Full-time Employment: 550
Contact: Mr. Terry Stephens, Pres/Owner
NAICS Codes: 331222
(2015)
1974Established:
PO Box 618Russell Springs, KY 42642-0618
www.spsfence.com
Sterling Tool & Die Inc
100 Tococo CourtWilmore, KY 40390-9595
859-858-9327
Fabrication and Installation of machines and machine parts
Full-time Employment: 9
Contact: Mr. Louis Daniels, Owner
NAICS Codes: 332322, 332999, 333514
(2014)
1995Established:
Stewart Iron Works Co
Covington Ironworks LLC
30 Kenton Lands RoadErlanger, KY 41018-1874
859-431-1985
Ornamental iron, guard rail, handrail, fences, posts and gates, gazebos, fountains, flagpoles, and site furniture fabrication and installation. Any custom ornamental iron work.
Full-time Employment: 29
Contact: Mr. Ted Reilly, COO
NAICS Codes: 332323, 332618, 337127
(2015)
1886Established:
www.stewartironworks.com
12/29/2015 Page 40 of 47
Strong Hold Products
Div Fabricated Metals LLC
6333 Strawberry LnLouisville, KY 40214-2929
502-363-4175
Steel fabrication: Industrial storage products: heavy duty 12ga steel cabinets, tables, tool & service carts, computer cabinets, personal lockers, etc.
Full-time Employment: 135
Contact: Ms. Tina Fowler, Pres
NAICS Codes: 332999, 337211, 337215
(2013)
1993Established:
PO Box 9043Louisville, KY 40209-0043
www.strong-hold.com
Structures Unlimited Inc
4122 Bishop LaneSuite 104Louisville, KY 40218
502-966-6061
Structural steel, mix steel, and railings fabricating and erection
Full-time Employment: 10
Contact: Mr. Nikki Heady, Pres
NAICS Codes: 332312
(2014)
1995Established:
Structures USA LLC
333 Peterson DriveElizabethtown, KY 42701
270-506-2184
Fabricate steel poles and structures for traffic signs, lights, cell towers, transmission lines, etc.
Full-time Employment: 26
Contact: Mr. Oscar Hatchett, Genl Mgr
NAICS Codes: 237310, 238120, 332312
(2015)
2013Established:
PO Box 2281Elizabethtown, KY 42702
www.vsisales.com
Stupp Bridge Company
Div Stupp Bros Inc
445 Century StBowling Green, KY 42101-7517
270-393-5000
Plate girder bridge fabrication
Full-time Employment: 117
Contact: Mr. Reuben Netherland, VP/Genl Mgr
NAICS Codes: 332312
(2014)
1999Established:
www.stuppbridge.com
Summit Fire Apparatus Inc
11 Sperti DrEdgewood, KY 41017-9654
859-331-0360
Custom metal, aluminum & steel fabricating; welding & fire truck bodies. Build firetrucks, general/custom fabrication - job shop.
Full-time Employment: 22
Contact: Mr. Joseph Messmer, Pres
NAICS Codes: 332312, 336211
(2015)
1957Established:
PO Box 17128Edgewood, KY 41017-0128
www.summitfireapparatus.com
Sunrise Tool & Die Inc
1333 Commonwealth DrHenderson, KY 42420
270-826-9153
Plastic injection molds & repairing
Full-time Employment: 32
Contact: Mr. Darrell Littrell, Owner
NAICS Codes: 333511
(2014)
1989Established:
www.sunrisetool.net
12/29/2015 Page 41 of 47
Superior Graphite Co
Desulco Div
4059 Calvin DrHopkinsville, KY 42240-5021
270-885-7186
Granular synthetic graphite & desulfurized petroleum coke
Full-time Employment: 80
Contact: Mr. Steve Hargrove, Plant Mgr
NAICS Codes: 327992, 331110
(2014)
1976Established:
PO Box 535Hopkinsville, KY 42241-0535
www.superiorgraphite.com
Superior Tool & Die
79 Ladonna DrClay City, KY 40312-9648
606-663-5670
Sheet metal fabricating, tools, dies & fixtures
Full-time Employment: 7
Contact: Mr. Kevin Morton, Owner
NAICS Codes: 332322, 333514
(2014)
1987Established:
Synergy Tool & Gauge LLC
1201 Deatsville RdCoxs Creek, KY 40013-7614
502-331-9819
Aluminum based v-shaped hulls and raised chassis for armor of military vehicles. Machine design and construction.
Full-time Employment: 29
Contact: Mr. Shawn Bryan, CEO
NAICS Codes: 333514
(2014)
1997Established:
www.synergytool.com
Sypris Technologies Inc
Sub Sypris Solutions Inc
2820 W BroadwayLouisville, KY 40211-1219
502-774-6011
Custom forgings and machining for the automotive, truck, mining, and alternative energy markets.
Full-time Employment: 185
Contact: Mr. Steve Straub, VP Opers
NAICS Codes: 332111, 332112, 336390
(2014)
1927Established:
www.sypris.com
Tamarlane Industries Inc
846 S Main StBeaver Dam, KY 42320-2131
270-274-4534
Sheltered workshop: wooden door sills, dishwasher parts, pallet repair, furniture hardware, boxes and inserts.
Full-time Employment: 200
Contact: Mr. Jerry Bevil, Pres
NAICS Codes: 321999, 332999, 624310
(2015)
1983Established:
www.tamarlane.org
Tammcor Industries
100 Venture CourtNicholasville, KY 40356
859-887-4697
Machine shop: general, CNC, prototype & development machining; tooling, prototypes, tool & die; extrusion & progressive dies
Full-time Employment: 25
Contact: Mr. Keith Tamminga, Pres
NAICS Codes: 332710, 332999, 333514
(2015)
2000Established:
www.tammcor.com
Tarter Gate Company LLC
Plant 1
10892 US 127Dunnville, KY 42528
606-787-7455
Metal farm & livestock products
Full-time Employment: 76
Contact: Mr. Donald Tarter, Pres
NAICS Codes: 332323
(2014)
1975Established:
PO Box 10Dunnville, KY 42528-0010
www.tartergate.com
12/29/2015 Page 42 of 47
Tarter Tube LLC
12464 US 127Dunnville, KY 42528-6054
606-787-7455
Welded steel tubing; galvanized welded steel tubing; custom steel tube fabricating
Full-time Employment: 80
Contact: Mr. Donald Tarter, Pres
NAICS Codes: 332996
(2014)
1975Established:
PO Box 10Dunnville, KY 42528-0125
www.tartergate.com
Taubensee Steel & Wire Co
3200 Ohio DrHenderson, KY 42420-5047
270-830-9473
Steel wire, high & low carbon
Full-time Employment: 56
Contact: Mr. Todd Swanson, Vice Pres
NAICS Codes: 331222
(2014)
1995Established:
taubensee.com
TEBCO of Kentucky Inc
100 Whitehall Shrine RoadRichmond, KY 40475
859-624-0653
Manufacture truck bodies, snowplows, and related equipment and distribution
Full-time Employment: 40
Contact: Mr. Michael Faulkner, Pres
NAICS Codes: 332312
(2014)
1991Established:
www.tebcoky.com
Tenryu America Inc
3601 Hargrave DrHebron, KY 41048
859-282-8158
Distribution center with product support service work provided.
Full-time Employment: 9
Contact: Mr. Yoshinori Suzuki, Pres
NAICS Codes: 332216, 493110
(2014)
2002Established:
www.tenryu.com
The Lyons Co
11401 Electron DrLouisville, KY 40299-3857
502-267-0087
Metal fabricating, store fixtures retail product, stainless steel appliances
Full-time Employment: 150
Contact: Mr. Keith Lyons, Pres
NAICS Codes: 331491, 332322, 332999
(2014)
1952Established:
www.lyons-companies.com
Titan Fabricators Inc
920 Wing AveOwensboro, KY 42303-0417
270-686-7436
Steel fabricated tanks, boiler components, ASME coded vessels, ducts, absorbers.
Full-time Employment: 75
Contact: Mr. Mike Horn, Pres
NAICS Codes: 332312, 332420
(2014)
1985Established:
PO Box 927Owensboro, KY 42302-0927
www.titanfabricators.com
TMK IPSCO Tubulars Kentucky Inc
100 Steel Plant RoadWilder, KY 41071
859-292-6000
Manufacture steel pipes for oil and gas industry
Full-time Employment: 349
Contact: Mr. Mark Wolber, Plant Mgr
NAICS Codes: 331110, 331210
(2014)
1981Established:
PO Box 721670Newport, KY 41072-1670
www.tmk-group.com
12/29/2015 Page 43 of 47
Toolco Inc
615 Bark CoveOwensboro, KY 42303-0606
270-684-1084
Tools, dies, jigs, fixtures & industrial molds
Full-time Employment: 12
Contact: Mr. Robert Evans, Pres
NAICS Codes: 333514
(2015)
1980Established:
PO Box 1250Owensboro, KY 42302-1250
www.toolco-inc.com
Toyota Tsusho America Inc
700 Triport RdGeorgetown, KY 40324-8974
502-868-3450
Headquarters, metals service center; steel slitting; blanking; warehousing; distribution, logistics
Full-time Employment: 450
Contact: Mr. Mike Lavender, Sr VP
NAICS Codes: 332312, 423510, 541614, 551114
(2015)
1986Established:
www.taiamerica.com
Tri County Steel Inc
3501 Mattingly RdBuckner, KY 40010-8801
502-222-2201
Sheet, structural, ornamental, miscellaneous steel fabricating
Full-time Employment: 3
Contact: Ms. Brenda Moyer, Pres
NAICS Codes: 332312, 332322, 332323
(2015)
1990Established:
P.O. Box 307Buckner, KY 40010-8801
Tri-Star Metals Inc
1415 East Parrish AvenueOwensboro, KY 42303
270-281-4500
Steel bar distributor: alloy, carbon, stainless, tool steel and high speed steel bars. Manufacture band saw guides. General machine shop.
Full-time Employment: 1
Contact: Mr. Edward Belfiglio, Pres
NAICS Codes: 332710, 423510
(2015)
1986Established:
www.tri-starmetalsinc.com
Trophy Awards Manufacturing Inc
1023 Town DriveWilder, KY 41076
859-442-7500
Awards, crystal awards, acrylic awards, trophies, plaques, corporate awards, gifts, promotional items, imprinted apparel, signage & nametags
Full-time Employment: 46
Contact: Mr. Tom Busch, Pres
NAICS Codes: 332999
(2014)
1985Established:
www.trophyawards.com
Tungco
3955 Anton RoadMadisonville, KY 42431
270-825-0000
Tungsten reclamation, mining bits, headquarters
Full-time Employment: 40
Contact: Mr. Steve Nance, CEO
NAICS Codes: 423510, 551114
(2014)
2001Established:
www.tungco.com
United Supply Services Inc
USS Inc
2100 Pennebaker AveBardstown, KY 40004
502-349-7144
Fabricated structural metal products
Full-time Employment: 4
Contact: Mr. Wilman E. Davis Jr., Pres/Owner
NAICS Codes: 332312, 332999
(2015)
2010Established:
www.uss-usa.com
US Chita
200 Hilpp DriveLebanon, KY 40033
270-692-0469
Coil springs for ATV's and motorcycles, valves for shock absorbers, snowmobile runners
Full-time Employment: 42
Contact: Mr. Eiji Minekawa, Pres
NAICS Codes: 332119, 332999
(2015)
2003Established:
12/29/2015 Page 44 of 47
Utility Metals
Div Fabricated Metals LLC
6210-R Strawberry LaneLouisville, KY 40214-2929
502-363-6681
Steel & alum fabricating: outdoor lighting products - poles/mast arms/brackets/etc.
Full-time Employment: 45
Contact: Ms. Tina Fowler, Pres
NAICS Codes: 332312, 332323, 332999
(2014)
1988Established:
PO Box 9054Louisville, KY 40209-0054
www.utilitymetals.com
Vegan Metal Fabricators Co
2045 State Route 339 ESedalia, KY 42079-9604
270-328-8980
Shelving racks; metal racks, dollies & material handling products
Full-time Employment: 10
Contact: Mr. Vegan Fakhoorian, Pres/Owner
NAICS Codes: 238390, 331110, 332510, 333924, 423440
(2014)
1985Established:
www.veganmetal.com
Vendome Copper & Brass Works Inc
729 Franklin StLouisville, KY 40202-6007
502-587-1930
Distillation & brewery equipment, ASME pressure vessels, condensers & tanks, distillation columns & internal components, custom fabricated process equipment, heat exchangers, field installation and repairs.
Full-time Employment: 65
Contact: Mr. Thomas E Sherman, Vice Pres
NAICS Codes: 332313, 332999, 333241, 333249
(2014)
1903Established:
www.vendomecopper.com
Vermont Thread Gage LLC
564 Reasonover DrFranklin, KY 42134
270-586-8107
Manufacturers threaded gage products for industries such as aerospace, automotive, electrical, fastener, and medical tooling
Full-time Employment: 120
Contact: Mr. John Gehret III, Mgr
NAICS Codes: 332216
(2014)
2000Established:
www.vermontgage.com
Vetco Inc
750 Paintlick RdBerea, KY 40403
859-986-8500
Custom designed and built metal buildings
Full-time Employment: 20
Contact: Mr. Owen Barnes, Owner
NAICS Codes: 332312
(2015)
1983Established:
PO Box 216Berea, KY 40403
www.vetcoinc.com
Vuteq Engineering Corp
Sub Vuteq Corporation
100 Carley DriveGeorgetown, KY 40324-9363
502-863-6377
Automotive stamping dies, automated assembly line equipment, checking fixture gauges, and metal stamping
Full-time Employment: 2
Contact: Mr. Hisao Nagahiro, Pres
NAICS Codes: 333514
(2014)
1988Established:
www.vuteqeng.com
W J Baker Co
120 South StreetWilder, KY 41071-2937
859-261-8482
Metal stampings and tubular spacers
Full-time Employment: 16
Contact: Mr. John Hengelbrok, VP/Genl Mgr
NAICS Codes: 332999
(2014)
1899Established:
www.bakerstamping.com
12/29/2015 Page 45 of 47
Waldemar Design & Machine LLC
1797 Matherly RoadLiberty, KY 42539-9301
606-787-8474
Plate, angle, and roll bending machines
Full-time Employment: 10
Contact: Mr. Ammon Weaver, Pres
NAICS Codes: 332999
(2015)
1980Established:
Wayne Floyd Gate Co Inc
6401 South US 127Liberty, KY 42539
606-787-6343
Steel farm gates
Full-time Employment:
Contact: Mr. Wayne Floyd, Pres
NAICS Codes: 332323
(2014)
1984Established:
www.floydgate.com
Werner Co
Louisville Plant
11225 Bluegrass PkwyLouisville, KY 40299-2319
502-267-5577
Industrial aluminum, fiberglass, climbing scaffolding, wood attic ladders, fall protection
Full-time Employment: 72
Contact: Mr. David Plotner, Plant Mgr
NAICS Codes: 321999, 326199, 332999
(2014)
1976Established:
www.wernerladder.com
West KY Steel Construction
701 Gulf StProvidence, KY 42450-1170
270-667-2913
Steel fabricating for coal mining industry
Full-time Employment: 13
Contact: Mr. James E. Gooch, Pres
NAICS Codes: 332312, 332313, 332323
(2014)
1958Established:
PO Box 68Providence, KY 42450-0068
www.kentuckysteel.org
Whip-Mix Corp
361 Farmington AveLouisville, KY 40209-1833
502-637-1451
Headquarters; Dental equipment & supplies, casting investment, jewelry casting, vacuum mixing laboratory equipment & gypsum powders. Milled zirconia dental restorations. Contract jobs.
Full-time Employment: 142
Contact: Mr. Allen F. Steinbock, CEO
NAICS Codes: 331512, 339114, 339116, 551114
(2014)
1919Established:
PO Box 17183Louisville, KY 40217-0183
www.whipmix.com
Whitworth Tool Inc
114 Industrial Park LnHardinsburg, KY 40143
270-756-0098
Components for aerospace, defense, automotive, pharmecutical, energy, and railway. Replacement parts for the tool & die industry, cmm data collection, engineering services.
Full-time Employment: 190
Contact: Mr. Kenny Whitworth, Pres
NAICS Codes: 332710, 332721, 333514
(2014)
1998Established:
P.O.Box 759Hardinsburg, KY 40143
www.whittool.com
Wise Industry LLC
170 Industry RdGeorgetown, KY 40324-9547
502-868-9493
Metal die blocks & special machinery tools, box spring tables (Sealy Corp.), electrical box handles (Square D), automotive stampings (Johnson Control), metal fabricating (TMMK)
Full-time Employment: 2
Contact: Mr. Billy Wise, Owner
NAICS Codes: 332119, 333514, 333517
(2015)
1987Established:
12/29/2015 Page 46 of 47
World Tower Co
1213 Compressor DrCampusMayfield, KY 42066
270-247-3642
Radio, TV, microwave & cellular communication towers
Full-time Employment: 36
Contact: Mr. Doug Walker, Pres
NAICS Codes: 332312, 334220
(2015)
1957Established:
PO Box 508Mayfield, KY 42066-0031
www.worldtower.com
Worldwide Technologies LLC
145 Reasonover DriveFranklin, KY 42134
270-598-7100
2d and 3d die sets and die forms to primarily service automotive market; production machining, heavy trucks, fence and railroad
Full-time Employment: 46
Contact: Mr. Michael Jones
NAICS Codes: 333514
(2014)
2006Established:
P.O. Box 1487Franklin, KY 42135
www.wwt-bg.com
12/29/2015 Page 47 of 47