Report Kentucky Facilities(2015) Established: 2005 PO Box 25 Henderson, KY 45419-0025 Alro Steel...

Number of Facilities: 319

Total Full-Time Employment: 21,499

December 29, 2015

Report Kentucky Facilities

Steel

Introduction and Methodology

The Kentucky industry reports provide a list of facilities (with 10 or more employees) normally associated with Cabinet programs. Most information is taken directly from surveys completed by each facility or from phone or personal contact with the facility. Survey information is collected on an annual basis. Facility name, address, location, product or service, employment and other information may change and often does change between annual surveys. While all attempts are made to capture ongoing changes from data provided by facilities, local economic development contacts, media announcements, and Cabinet programs, no guarantee can be made that changes will be discovered. Also included on these reports, but not counted in the total number of facilities or full-time employment, are new location projects recently announced in Kentucky. The projects are identified by (announced) next to their projected full-time employment.

Disclaimer

The information provided herein by the Kentucky Cabinet for Economic Development is believed to be accurate but is not warranted and is for informational purposes only. While all attempts are made to insure the correctness and accuracy of information in this report and to make corrections and change errors brought to our attention, no representation or guarantee, express or implied, is made as to the accuracy of the information presented. Any information provided in this report is provided without assurances or warranties and should not be relied upon as fact. The Kentucky Cabinet for Economic Development assumes no liability for the accuracy of the information contained in this report.

A & C Sheet Metal

988 Swan StLouisville, KY 40204-1810

502-635-6363

Electrical boxes; plate, ornamental, sheet & structural metal fabricating and installation

Full-time Employment: 8

Contact: Mr. Glenn Arington, Pres

NAICS Codes: 332312, 332322, 332323

(2014)

1977Established:

www.aandcsheetmetal.com

A & L Manufacturing Co Inc

4219 S Brook StreetLouisville, KY 40214-1815

502-366-3037

Miscellaneous and structural metal fabricating including stairs and railings


Contact: Ms. Lee Lattis, Pres

NAICS Codes: 332312, 332323, 332999

(2014)

1964Established:

A & S Fabricating Co

265 US Highway 431 NLivermore, KY 42352

270-278-2371

Job shop specializing in large, heavy custom metal fabrications, complete machine shop service including large machining, industrial repairs, machinery builder, sandblast, painting, assembly


Contact: Mrs. Karen Whitaker, Pres

NAICS Codes: 332312, 332313, 332710, 333318

(2014)

1969Established:

PO Box 160Livermore, KY 42352-0160

www.asfabco.com

A N Roth Company LLC

749 E Jefferson StLouisville, KY 40202-1030

502-584-8503

Architectural & ornamental sheet metal fabricating; heating & air conditioning duct work, sales and service


Contact: Mr. Karl P. Roth Jr., Pres

NAICS Codes: 332322, 332323

(2015)

1866Established:

www.anroth.com

Accurite Machine & Manufacturing Inc

4421 Poplar Level RoadLouisville, KY 40213

502-238-4808

Machinery and equipment; fixtures; gauges


Contact: Mr. Paul Blandford, Pres

NAICS Codes: 333514, 333519

(2015)

1992Established:

www.accuritemachine.com

Acramold Inc

1670 Distribution DrCommerce Park WestBurlington, KY 41005-9507

859-525-8811

Reverse engineering, tool, dies and custom molds & plastic injection molded products


Contact: Mr. Dallas Trinkle, Pres

NAICS Codes: 326199, 333514

(2014)

1979Established:

www.acramold.com

Adams Magnetic Products Co

509 Assembly DrElizabethtown, KY 42701-1162

270-763-9090

Magnets, magnetic tools & magnet assemblies, flexible and advertising magnetic sheeting


Contact: Mr. Tony Hull, GM Admin

NAICS Codes: 332999, 333515

(2014)

2005Established:

www.adamsmagnetic.com

Advanced Drainage Systems Inc

121 Buck Creek Church RdCalhoun, KY 42327

270-733-4324

Corrugated plastic pipes


Contact: Mr. Aaron Buck, Plant Mgr

NAICS Codes: 326122, 326199, 332996

(2014)

1977Established:

www.ADS-pipe.com

12/29/2015 Page 1 of 47

Advanced Green Components LLC

4005 Corporate DrWinchester, KY 40391-9680

859-737-6016

Produces forgings and machined rings for tapered roller bearings; produce outer and inner rings for tapered wheel bearings


Contact: Ms. Velva Hall, HR Mgr

NAICS Codes: 332111, 339991

(2014)

1997Established:

www.advgreen.com

Aggressive Tool & Die Inc

5 Quality PlBuckner, KY 40010

502-222-5555

Tool & die, molds


Contact: Mr. Roger Geary, Pres

NAICS Codes: 333514

(2014)

1989Established:

PO Box 335Buckner, KY 40010-0335

Aichi Forge USA Inc

596 Triport RdGeorgetown, KY 40324-9529

502-863-7575

Steel forgings and powder metal sinter forgings for application in automotive/aircraft engine and suspension components.


Contact: Mr. Takehiro Isogai, Pres

NAICS Codes: 332111

(2015)

1985Established:

AK Steel Corp

Ashland Works

170 Armco RoadAshland, KY 41101

606-329-7422

Steel slabs


Contact: Mr. Doug Brown, Genl Mgr

NAICS Codes: 331221

(2014)

1921Established:

www.aksteel.com

Alabama Wire Products Inc

1100 West Park RoadElizabethtown, KY 42701

270-737-6581

Drawn wire for refrigerator shelving, oven racks, and modular storage racks; supplier of coil-based wire.


Contact: Mr. Todd Seger, Genl Mgr

NAICS Codes: 331222

(2014)

2005Established:

www.sswholding.net

A-Line Tool & Die Inc

4158 Reservoir AveLouisville, KY 40213-2077

502-451-5741

Tool & die, plastic injection molds & aluminum stamping dies


Contact: Mr. Greg French, Owner

NAICS Codes: 331318, 333514

(2014)

1967Established:

Allstate Tower Inc

232 Heilman AveHenderson, KY 42420

270-830-8512

AST is a full service tower contracting firm. . AST's also manufactures a plethora of steel structures including, but not limited to, telecommunication towers, agricultural material handling, and custom structures.


Contact: Mr. Ben Johnston, Dir

NAICS Codes: 332312, 551114

(2015)

2005Established:

PO Box 25Henderson, KY 45419-0025

www.allstatetower.com

Alro Steel Corporation

310 Boxley AveLouisville, KY 40209

502-635-7481

Steel service center: shearing, burning & sawing


Contact: Mr. William McMurphy, Genl Mgr

NAICS Codes: 423510

(2015)

1987Established:

www.alro.com

12/29/2015 Page 2 of 47

Alutrim

810 W Main StLebanon, KY 40033-1804

270-692-2142

Decorative aluminum trim for automotive/white goods iIndustries (sill/scuff plates and decorative aluminum trim i.e. door panel).


Contact: Mr. John Simpson, HR

NAICS Codes: 331318, 332999

(2014)

1965Established:

www.angell-demmel.com

Amcor Flexibles Shelbyville

6850 Midland Industrial DrShelbyville, KY 40065-9743

502-223-7800

Flexible packaging for pharmaceutical industry


Contact: Mr. Ron Jones

NAICS Codes: 326199, 332999

(2014)

1994Established:

www.amcor.com

America Sednair Compressor Systems

3551 Park Ave.Suite CPaducah, KY 42001

270-443-3111

Air compressor parts


Contact: Mr. Hunter Guan, Pres

NAICS Codes: 332999

(2014)

2005Established:

P.O. Box 7954Paducah, KY 42002

www.americasednair.com

American Building Components

6975 Danville RdNicholasville, KY 40356-9594

859-887-4406

Metal building products


Contact: Mr. Jack Bell, Plant Mgr

NAICS Codes: 331221, 423510

(2015)

1991Established:

PO Box 310Nicholasville, KY 40340-0310

www.abcmetalroofing.com/abcroofing

American Highway Fence

220 Midland Trail Industrial ParkMt. Sterling, KY 40353

859-498-3658

Fencing materials


Contact: Mr. Robert Reynolds, Pres

NAICS Codes: 331222

(2015)

1997Established:

PO Box 717Mt. Sterling, KY 40353

www.highwayfenceusa.com

American Metal Supply Co

1250 Old Fern Valley RdLouisville, KY 40219

502-634-4321

Steel and metals distributor and manufacturer. Provides turnkey service of steel products as well as first tier processing and forming.


Contact: Ms. Lynn Rhea, Branch Mgr

NAICS Codes: 332312

(2015)

1993Established:

www.americanmetalsupply.com

Andrews Laser Works Corp

100 Andrews WayWilder, KY 41071

859-292-8881

Provider of laser processing, metal stamping, welding, fabrication, and machining services; and manufacturer of jet engine components.


Contact: Mr. Dave Schneider, Pres

NAICS Codes: 332119, 333514, 336412

(2014)

1946Established:

www.andrewslaserworks.com

12/29/2015 Page 3 of 47

Aquatic Access Inc

1921 Production DrLouisville, KY 40299

502-425-5817

Water-powered handicapped swimming pool & spa lifts meeting ADA guidelines for public pools, and other lifts for residential pools


Contact: Ms. Linda Nolan, Pres

NAICS Codes: 332999

(2014)

1987Established:

www. AquaticAccess.com

Armag Corporation

Sub of Haydon Holdings, LLC

300 Armag AvenueBardstown, KY 40004-2041

502-348-3987

Steel fabricating: ammunition & explosive storage magazines


Contact: Mr. Paul Haydon, Pres

NAICS Codes: 332312

(2014)

1999Established:

40 Lucknow CtBardstown, KY 40004-2113

www.armagcorp.com

Artiflex Manufacturing

111 Commerce BlvdFrankfort, KY 40601

502-565-4386

Manufacturer of metal stamping dies, die repair service, producer of metal stamped parts


Contact: Mr. Darrin Whitehouse, Plant Mgr

NAICS Codes: 333514

(2015)

2008Established:

www.artiflexmfg.com

Asahi Forge of America Corporation

5030 Corporate WayRichmond, KY 40475

859-626-4100

Hot forge manufacturing for the automotive industry


Contact: Mr. Hirofumi Mori, Vice Pres

NAICS Codes: 332111, 336310

(2014)

2003Established:

www.asahiforge.co.jp/en/

Ashland Fabricating & Welding

3321 Greenup AveAshland, KY 41101-2099

606-324-5255

Steel fabricating, arc & gas welding, grinding; drilling, cutting


Contact: Mr. Gary L. Layman, Pres

NAICS Codes: 332312, 332999, 811310

(2014)

1954Established:

B & H Tool Works Inc

1785 Lancaster RdRichmond, KY 40475-8755

859-624-2458

A full service tooling, machining, stamping, and fabrication job shop. Capabilities include CNC, EDM, and laser machining. Progressive and hand transfer stamping capabilities


Contact: Mr. Sammy Hammons, Pres

NAICS Codes: 332618, 333514, 333517, 336370

(2014)

1978Established:

PO Box 149Richmond, KY 40476-0149

www.bhtoolworks.com

B & H Tool Works Inc of Rockcastle County

83 Henderson DriveRockcastle Industrial Park SMount Vernon, KY 40456

606-256-4878

Specialty machinery, metal stamping tooling, dies


Contact: Mr. Everett Harper, Genl Mgr

NAICS Codes: 333514

(2014)

1998Established:

PO Box 1228Mount Vernon, KY 40456-1228

Bandana Co Inc

6228 Strawberry LaneLouisville, KY 40214

502-637-8752

Metal yard sculptures


Contact: Mr. Richard Kolb, Pres

NAICS Codes: 332323

(2014)

1991Established:

www.yardbirds.info

12/29/2015 Page 4 of 47

Bekaert Corporation

2000 Isaac Shelby DrShelbyville, KY 40065-9129

502-633-6722

Preformed steel staple wire, fine wire, flat wire, nylon-coated wire, tin-coated wire and galvanized wire


Contact: Mr. Kendall Hall, Plant Mgr

NAICS Codes: 331222

(2014)

1990Established:

www.bekaert.com

Berea Tool & Cutter Grinding

93 Mason Lake RdBerea, KY 40403-2177

859-986-2214

Tool and die, cutter grinding, fixtures, prototype, fabricating, machining and repair work.


Contact: Ms. Ponjetta Hobbs, Owner

NAICS Codes: 333318, 333514

(2014)

1984Established:

www.bereatool.com

Bilstein Cold Rolled Steel LP

3250 Spring Hollow AvenueBowling Green, KY 42104

270-908-4906

Cold rolled steel production mill

Full-time Employment: 50-90

Contact: Mr. Mark J Loik, Pres/CEO

NAICS Codes: 331110

(announced)

2013Announced:

www.bilstein-north-america.com

Blandford Machine & Tool Co

5604 Fern Valley RdLouisville, KY 40228-1056

502-964-3375

Machine shop: tools, dies, jigs, fixtures, prototypes & special machinery; drilling & boring; progressive dies


Contact: Mr. Todd Bello, Pres

NAICS Codes: 333249, 333318, 333514

(2014)

1979Established:

Blue Grass Manufacturing Inc

1454 Jingle Bell LaneLexington, KY 40509-4112

859-233-7445

Contract manufacturer & fulfillment center. CNC machining all materials, metal fabrication; spot, MIG, TIG, welding, and electro mechanical assembly, fabricated wire, tube and pipe. We run production quantities only. No tooling


Contact: Mr. Don R. Bundy, Pres

NAICS Codes: 332618, 332710, 332999, 493110, 561910

(2014)

1961Established:

www.bluegrassmfg.com

Bottoms Engineering & Service Inc

955 Chenault RdFrankfort, KY 40601

502-695-2200

Structural steel fabricating for the KY highway bridge industry. Handrails, fence, finger dams, steel, and contractor supplies


Contact: Mr. Thomas Thompson, Pres

NAICS Codes: 332312

(2014)

1967Established:

www.bottomsengineering.com

Branch Tool Inc

680 Chappells Dairy RoadSomerset, KY 42503

606-679-9335

Machine shop: milling & CNC machining; tool & die


Contact: Mr. Jesse Reynolds, Pres

NAICS Codes: 332710, 333514

(2014)

1998Established:

[email protected]

12/29/2015 Page 5 of 47

Brewer Machine and Parts LLC

Highway 70 WCentral City, KY 42330

270-754-1768

Steel fabricating, gang rip saws and woodworking machinery, custom machinery for wood industry.


Contact: Mr. Alvin Bates

NAICS Codes: 332216, 332312, 333243

(2014)

1969Established:

PO Box 512Central City, KY 42330-0512

www.brewermach.com

C & S Machine & Manufacturing Corp

3832 Fitzgerald RdLouisville, KY 40216-5292

502-778-4479

Machine shop: CNC machining, arc & gas welding, drilling, boring, cutting, lathe & mill work, production machining. Tier 1 supplier. ISO 9001


Contact: Mr. Robert Steele, Pres

NAICS Codes: 332710, 332721, 332999

(2014)

1969Established:

www.csmachinemfg.com

C G S Machine & Tool Inc

2750 Griffin DriveBG CampusBowling Green, KY 42101

270-783-3589

Specialty machinery, tool & die, spare parts, production runs


Contact: Mr. Stephen Allen, Pres

NAICS Codes: 332710, 333249, 333514

(2015)

1994Established:

www.cgsmachine.com

Caldwell Tanks Inc

4000 Tower RdLouisville, KY 40219-1901

502-964-3361

Manufacture steel water tanks & towers


Contact: Mr. Bernard Fineman, Pres

NAICS Codes: 332312, 332420, 423830

(2015)

1985Established:

PO Box 35770Louisville, KY 40232-5770

www.caldwelltanks.com

Campbells Machine Shop Inc

387 Garfield Cemetery LaneGarfield, KY 40140-9801

270-756-0995

CNC mill & lathe work & screw machine products, pharmaceutical products, automotive products, lawn care products, wire EDM, CNC plasma


Contact: Mr. Tim Campbell, Pres

NAICS Codes: 332721, 332999

(2014)

1987Established:

6307 E Highway 60Garfield, KY 40140-9801

www.campbellsmachineshop.com

Campbellsville Industries Inc

440 Taylor BlvdCampbellsville, KY 42718-1200

270-465-8135

Ornamental metal & aluminum fabricating; steeples, cupolas, crosses, cornices, awnings, columns, louvers, shutters, railings & balusters


Contact: Mr. Rick Moon

NAICS Codes: 332323

(2014)

1955Established:

PO Box 278Campbellsville, KY 42719-0278

www.cvilleindustries.com

12/29/2015 Page 6 of 47

Carbide Products Inc

800 Clayton AveGeorgetown, KY 40324-1571

502-863-2340

Special tools, dies, machine parts any material; multi-discipline hi-precision machine, turn, grind, lap, EDM; solid & brazed carbide cutting tools; carbide, steel & composite


Contact: Mr. Carl D Strippelhoff, Pres

NAICS Codes: 325180, 332216, 332710, 333514, 333515, 33351

(2014)

1942Established:

PO Box 550Georgetown, KY 40324-0550

www.carbidepros.com

Cardinal Manufacturing Co

225 Eiler AveLouisville, KY 40214-2924

502-363-2661

Steel, bronze, brass & aluminum roll formed metal products & parts


Contact: Mr. Eric Weisbach, Prdtn/Ops Exec

NAICS Codes: 331221, 331420, 332322

(2015)

1958Established:


www.cardinalmfg.com

Cardinal Shower Enclosures

4795 Shepherdsville RoadLouisville, KY 40218

502-969-4059

Full service manufacturer of shower door enclosures. Commercial products.


Contact: Ms. Colleen Wilson, HR Mgr

NAICS Codes: 332999

(2015)

N/AEstablished:

www.cardinalshower.com

CC Metals & Alloys LLC

1542 North Main StCalvert City, KY 42029-9251

270-395-7631

Ferro alloys (metal) production & warehouse distribution


Contact: Mr. Motti Korf, CEO

NAICS Codes: 331110, 541614

(2015)

1949Established:

PO Box 217Calvert City, KY 42029-0217

www.ccmetals.com

CCI Industrial Services

799 Kit Cowan RdSomerset, KY 42501

606-677-0241

Metal fabrication, machinery installation & maintenance, certified heat treated wood crate packaging, air & water piping, CNC machining, heavy haul transportation


Contact: Mr. Rick Cable, Owner

NAICS Codes: 332312, 423830

(2015)

2004Established:

P.O. Box 433Somerset, KY 42502

www.cciindustrial.us

Central Machinery Movers and Fabricators Inc

137 Ballard RdLancaster, KY 40444-9043

859-548-2506

Steel fabricating


Contact: Mr. Jim Lane, Pres

NAICS Codes: 332312

(2015)

1994Established:

PO Box 41Lancaster, KY 40444-0041

12/29/2015 Page 7 of 47

Centria

1099 US Highway 421 SFrankfort, KY 40601-8821

502-695-5578

Steel building components: electrified floor decks, roll formed products, gutters, louvers, vents, siding & wall panels


Contact: Mr. William Jones, VP

NAICS Codes: 332322, 332999

(2015)

1987Established:

www.centria.com

Cepeda Associates Inc

11100 Decimal DrLouisville, KY 40299-2440

502-267-4945

Submarine air purifying equipment, welding, machining, fabrication


Contact: Mrs. Star Dillard, Pres

NAICS Codes: 332710, 333413, 333514, 541330, 811310

(2014)

1977Established:

http://www.cepedaassociates.com

Challenger Lifts Inc

200 Cabel StLouisville, KY 40206-1810

502-625-0700

Designs, manufactures and distributes vehicle lifts and accessories for the automotive repair sector.


Contact: Mr. David Reavis, Pres

NAICS Codes: 332999

(2014)

1995Established:


www.challengerlifts.com

Chieftain Steel LLC

South US 127Liberty, KY 42539

606-787-4613

Manufacture welded rolled steel tube


Contact: Mr. Bryan Floyd, Owner

NAICS Codes: 331210

(2015)

2008Established:

1498 S Wallace Wilkinson BlvdLiberty, KY 42539

www.chieftainsteel.com

Clark Machine Tool & Die Inc

1314 Shun PikeNicholasville, KY 40356-9401

859-885-9488

Customer specific production machinery, special fixtures, special tooling, including electronics and computer programming on the machinery


Contact: Mr. Ray Clark, Pres

NAICS Codes: 333318, 333514, 811219

(2015)

1967Established:

Clayton & Lambert Manufacturing Co

3813 W Highway 146Buckner, KY 40010

800-626-5819

Grain bins, storage silos, stainless steel panels for in ground pools and spas & pool structures, outdoor poster panels, standing seam roofs, above ground containment basins


Contact: Mr. John W. Lambert, Pres

NAICS Codes: 332311, 332313, 332999

(2014)

1956Established:


www.claytonlambert.com

Clinton Industries Inc

203 Valley Creek RdElizabethtown, KY 42701-9052

270-769-1354

Tools, dies & specialty machinery


Contact: Mr. Clint Schaffrick, Pres

NAICS Codes: 333318, 333514

(2015)

1967Established:

12/29/2015 Page 8 of 47

Collins Engineering Inc

1584 US Highway 41A NDixon, KY 42409

270-639-7956

Machine shop: general & CNC machining, boring & cutting & lathe & mill work. Build molds for the plastic injection molding industry.


Contact: Mr. Edward Knapp, Pres

NAICS Codes: 332710, 333511, 811310

(2015)

1985Established:

PO Box 400Dixon, KY 42409

www.pioneerplastics.com

Combs Custom Manufacturing

1300 Lakeside DrJackson, KY 41339-9678

606-666-2418

Truck bumpers & accessories, push bars, grilles & grille guards; equipment parts - loaders, dozers, handrails, custom off road and ATV parts


Contact: Mr. Darrell Miller, Owner

NAICS Codes: 331221, 332312, 336390

(2015)

1979Established:

Commonwealth Tool & Machine Inc

3511 Main StStamping Ground, KY 40379-9631

502-535-4430

Design, build and integrate robotic welding equipment, resistance welders, spot welders, end effectors, tool & die, special machines & gauges, EDM work, materials handling equip & machine shop


Contact: Mrs. Linda Whitlock, Pres

NAICS Codes: 332313, 332710, 333514

(2014)

1984Established:

PO Box 120Stamping Ground, KY 40379-0120

www.commonwealthtool.com

Conco Inc

4000 Oaklawn DrLouisville, KY 40219-2796

502-969-1333

Metal fabricated ammunition containers & boxes


Contact: Mr. Gil Everson, Pres/CEO

NAICS Codes: 332431, 332439

(2015)

1967Established:


www.concocontainers.com

Contech Engineered Solutions LLC

5726 Roberts DrAshland, KY 41102-8361

606-928-6404

Corrugated steel culvert pipe


Contact: Mr. J.D. Griffith, Plant Supt

NAICS Codes: 332439, 332996

(2014)

1966Established:

www.conteches.com

CONTECH Engineered Solutions LLC

700 Tech DrWinchester, KY 40391-9662

859-744-3339

Steel retaining sheets & multiplate bridge planks. Galvanized structural steel & aluminum drainage & bridge products & retaining walls


Contact: Mr. Joe Kuhn, Plant Mgr

NAICS Codes: 331221

(2014)

1985Established:

www.conteches.com

Contract Machining & Manufacturing

2425 Over DrLexington, KY 40511-2613

859-253-9700

General, CNC, prototype & custom machining; tooling


Contact: Mr. Fred Lawson, Pres

NAICS Codes: 332420, 332710, 332721, 332996, 336350

(2014)

1981Established:

www.contract-machining.com

12/29/2015 Page 9 of 47

Corrosion Resistant Reinforcing

935 Wendstrup DriveWalton, KY 41094

513-719-0114

Fabricate stainless rebar


Contact: Mr. Robert faircloth, Owner

NAICS Codes: 332312

(2015)

2015Established:

10320 S. Medallion DriveCincinnati, OH 45241

www.cmcmmi.com

Craig Machinery & Design Inc

629 W Magnolia AveLouisville, KY 40208-2239

502-635-7950

Automation machinery & tooling, plastic assembly equipment. Also clam shell, blister welding and closure machinery. Low volume contract plastic welding


Contact: Mr. Ken Rabeneck, Pres

NAICS Codes: 333514, 333999

(2015)

1977Established:

www.craigmachinery.com

Cumberland Mine Service Inc

12326 N US Hwy 119Totz, KY 40870

606-573-7650

Metal fabricating; custom ceramic & abrasion resistant coating service; ceramic liners, construction and maintenance


Contact: Ms. Nancy Garland

NAICS Codes: 332812, 332999

(2015)

1980Established:

PO Box 394Cumberland, KY 40823-0394

www.cumberlandmineservice.com

Curtis-Maruyasu America Inc

Plt 1, 2, & 3

665 Metts DrLebanon, KY 40033-1909

270-692-2109

Motor vehicle fuel systems & parts; fabricates pipes & fittings fuel or oil caps, hybrid fuel storage systems, fuel injection systems, fuel tanks, breather elements, nonferrous alloy tubing


Contact: Mr. Doug Vyverberg, Pres

NAICS Codes: 332996, 336390

(2014)

1988Established:

www.curtismaruyasu.com

D C Morrison Co

201 Johnson StCovington, KY 41011-1437

859-581-7511

Machine shop: keyseaters, Schaver speed lathe, feedscrews


Contact: Mr. Roger Reder, Treas

NAICS Codes: 332710, 332999, 333517

(2015)

1950Established:

P O Box 586Covington, KY 41011

www.dcmorrison.com

D G Industries Inc

1270 S Preston HwyShepherdsville, KY 40165

502-955-1670

Custom metal, steel & plastic fabricating


Contact: Mr. Donald Gravatte, Pres

NAICS Codes: 326199, 332312, 332322

(2014)

1989Established:

PO Box 753Mt. Washington, KY 40047-0753

Dafco Aerospace

4830 Crittenden DrLouisville, KY 40209

502-361-8826

Investment casting foundry


Contact: Mr. John Dameron, CEO

NAICS Codes: 331512, 331513

(2014)

2011Established:

www.dameron.net

12/29/2015 Page 10 of 47

Dafco Inc

Div Dameron Alloy Foundries

6851 Cane Run RdLouisville, KY 40258-2845

502-933-9311

Investment castings foundary


Contact: Mr. John Dameron, CEO

NAICS Codes: 331512, 331513

(2015)

1994Established:

www.dameron.net

Dahl & Groezinger Inc

940 W 9th StOwensboro, KY 42301-2001

270-684-1404

Scrap iron, ferrous & nonferrous metal processing, export scrap.


Contact: Mr. Drew Kirkland, Pres

NAICS Codes: 331420, 331511, 423930

(2014)

1885Established:

PO Box 926Owensboro, KY 42302-0926

Dant Clayton Corp

1500 Bernheim LnLouisville, KY 40210-2210

502-634-3626

Grandstands/bleachers, spectator seating, custom structural steel products and press boxes


Contact: Mr. Keith Williams, Pres/CEO

NAICS Codes: 332312, 337127

(2015)

1979Established:

www.dantclayton.com

Davert USA Inc

100 N Graham AvenueBowling Green, KY 42102

270-796-5076

Steel carrier


Contact: Mr. Bob Collier, Pres

NAICS Codes: 332999

(2013)

2013Established:

Deltech Manufacturing Inc

3910 Oaklawn DrLouisville, KY 40219-2719

502-962-3500

Manufacture and distribute our own line of fitnness equipment, conveyor bearings and utility pole components along with contract machining, metal stamping and metal fabrication


Contact: Mr. Glenn Hillis, CEO

NAICS Codes: 326199, 332119, 332710, 332721, 333514, 33992

(2014)

1984Established:

www.deltechmfg.com

Denios Inc

1152 Industrial BlvdLouisville, KY 40219

502-933-7272

Spill containment and storage equipment for chemicals


Contact: Mr. Brian Pahl, Pres

NAICS Codes: 332312

(2015)

1990Established:

www.denios-us.com

Derby Welding & Machine Co Inc

4624 Pinewood RdLouisville, KY 40218-2930

502-966-0232

Steel fabricating & welding


Contact: Mr. Gary Young, Owner

NAICS Codes: 332312, 811310

(2014)

1967Established:

Desma USA Inc

2195 Arbor Tech DrHebron, KY 41048

859-525-6610

Rubber injection molding machinery sales and service. Production of rubber machine injection molds.


Contact: Mr. L. Scott Early, Pres

NAICS Codes: 333249, 333511

(2015)

1999Established:

www.desma-usa.com

12/29/2015 Page 11 of 47

Dotweld

1300 Lakeside DriveJackson, KY 41339

606-666-9200

Metal manufacturing and fabrication


Contact: Ms. Dottie Combs, Owner

NAICS Codes: 332312, 811310

(2014)

2002Established:

PO Box 703Jackson, KY 41339

Drilco Industrial Inc

Div Thompson International Inc

5840 Airline RdHenderson, KY 42420-9561

270-826-3751

Drill pipe fabricating, stabilizers, shock subs


Contact: Mr. Clifford Thompson, Pres

NAICS Codes: 332996, 333515

(2014)

1952Established:


www.thompsoninternational.com

Drill Steel Service Inc

4898 Highway 15Whitesburg, KY 41858-8582

606-633-4492

Steel rods, overcast, mandoors and other metal products. Distributes cutting bits & roof bolt products


Contact: Mr. Larry Cornett, Pres

NAICS Codes: 331110

(2014)

1983Established:

DSI Underground Systems Inc

UNA Tunneling Division

1032 E Chestnut StLouisville, KY 40204-1019

502-583-1001

Structural steel fabricating & underground shaft and tunnel liners as well as rock bolts; all used in mining and tunneling applications.


Contact: Mr. Tom Clemens, Pres

NAICS Codes: 332312, 332313

(2015)

1985Established:

1774 Mellwood AveLouisville, KY 40206-1756

www.dsiunderground.com

Dynamic Fabrication Inc

3523 US Hwy 62EBeaver Dam, KY 42320

270-274-5810

Full service steel fabrication


Contact: Mr. Brian Law, Owner/Pres

NAICS Codes: 332312

(2014)

2006Established:

Eastlex Machine Corp

2170 Christian RdLexington, KY 40509-4300

859-254-1388

Attaching & belt loop cutting machines & press-type machines.


Contact: Mr. Andrew Schmidt, Pres

NAICS Codes: 332999, 333517

(2014)

1956Established:

www.eastlex.com

Eckert Welding & Erectors Inc

1015 Town DriveWilder, KY 41076

859-572-9444

Arc, gas, MIG, TIG & heliarc welding; steel fabricating & erecting; steel erection & welding services


Contact: Ms. Teresa Eckert, CEO

NAICS Codes: 238120

(2015)

1946Established:

www,eckertwelding.com

12/29/2015 Page 12 of 47

EDAC Composites LLC

1400 Jamike AvenueErlanger, KY 41018

859-283-7155

Manufacture composite engine and aerostructure components to support the aerospace industry.


Contact: Mr. Mike Braun, Plant Mgr

NAICS Codes: 325211, 326199, 332999, 336413, 541712

(2014)

1986Established:

www.edactechnologies.com

Elizabeth Carbide Kentucky

dba Scheu & Kniss

1500 W Ormsby AveLouisville, KY 40210-2499

502-635-6303

Parts and service for rotary tablet presses


Contact: Mr. David Risinger, Genl Mgr

NAICS Codes: 332710, 332721, 333514, 333999, 336413

(2015)

1915Established:


www.eliz.com

EST Tool & Machine Inc

55 Dug Hill RdBrodhead, KY 40409

606-758-4626

Custom tooling and machining for the automotive, aerospace, forging and railroad industries. 3 axis CNC machining, CNC lathe work, wire EDM services, welded fabrication


Contact: Mr. A. Eugene Taylor, CEO

NAICS Codes: 333514

(2015)

1995Established:

PO Box 357Brodhead, KY 40409-0357

www.esttool.com

EZ-Access

Homecare Products Inc

3215 SR 2835Morganfield, KY 42437

270-389-1702

Manufacture portable wheelchair ramps and modular wheelchair ramps for home/commercial use. Also manufacture Vertical Porch Lifts for home/commercial use.


Contact: Mr. Don Everard, CEO

NAICS Codes: 332999, 333924, 339113

(2014)

2009Established:

Fab Steel Inc

476 Transport CtLexington, KY 40511-1015

859-253-0630

Structural and miscellaneous steel fabricating


Contact: Mr. Duane Redmon, Secy/Treas

NAICS Codes: 332312

(2014)

1992Established:

www.fabsteelinc.com

FABCO Inc

1339 Campbellsville Rd.Columbia, KY 42728-1236

270-384-4657

Machine shop: arc & gas welding; drilling, boring, cutting, honing; structural steel fabricating, steel truckbed flats, custom benches, plasma cut designs, stairs, handrail, guardrail


Contact: Mr. Anthony Janes, Owner

NAICS Codes: 332312, 333318, 811310

(2014)

1980Established:

PO Box 486Columbia, KY 42728-0486

12/29/2015 Page 13 of 47

Fabricated Metals

Div Fabricated Metals LLC

6300 Kenjoy DrLouisville, KY 40214-2927

502-363-2625

Railroad and mass transit accessories: houses/bunglows/cases/ cantilevers/bridges


Contact: Ms. Tina Fowler, Pres

NAICS Codes: 332999

(2014)

1955Established:


www.fabricatedmetals.com

Farmer's Gate Co

8610 Liberty RdCampbellsville, KY 42718-8278

270-465-7056

Steel gates, corral panels, round bale feeders, walk-throughs


Contact: Mr. Mark Farmer, Pres

NAICS Codes: 332312, 332323, 333111

(2013)

1997Established:

www.farmersgate.com

Fast Fabricators LLC

164 Hamilton CtLouisville, KY 40229-4023

502-955-8525

Ductile iron pipe fabricating


Contact: Mr. Greg Creehan, Opers Mgr

NAICS Codes: 332996

(2014)

1991Established:

www.fastfab.com

Federal-Mogul Products Inc

Vehicle Safety & Protection Division

20 Aberdeen DrGlasgow, KY 42141-8238

270-651-3609

Heavy duty truck brake friction blocks for the commercial vehicle industry.


Contact: Mr. Rick Zimmerman, Plant Mgr

NAICS Codes: 332999, 336211

(2014)

1996Established:

www.federalmogul.com

Felker Brothers Corp

125 Beaver TrlGlasgow, KY 42141-1273

270-678-4143

Stainless steel pipe, stainless steel pipe and tube 2" thru 24" in diameter.


Contact: Mr. Gary Hartell, Plant Mgr

NAICS Codes: 331221

(2014)

1993Established:

www.felkerbrothers.com

Ferrous85" Company

Ferragon Corporation

100 Steel Plant RoadWilder, KY 41076

859-261-6161

Steel toll processors of flat rolled steel


Contact: Mr. Eduardo Gonzalez, Pres

NAICS Codes: 331110

(2014)

2011Established:

PO Box 429Newport, KY 41071

www.ferrous85.com

12/29/2015 Page 14 of 47

FET Engineering Inc

903 Nutter DrBardstown, KY 40004-2606

502-348-2130

Nickel molds, vacuum form tooling and trials,fixtures, jigs, foam tooling, guages, laser welding, CAD design/development for the automotive, aerospace, medical and home building industries


Contact: Ms. Ann Hardin, Vice Pres

NAICS Codes: 332313, 333511, 333514, 541512

(2014)

1987Established:

www.fetusa.com

Fikeco Inc

149 Tech WayCynthiana, KY 41031-9217

859-234-2878

Sheet metal fabrication, HVAC, welding


Contact: Mr. James R. Donaldson, Pres

NAICS Codes: 332312, 332322

(2015)

1985Established:

PO Box 576Cynthiana, KY 41031-0576

Floyd Industries LLC

2248 KY 910Liberty, KY 42539

606-787-6343

Livestock handling equipment made from tubular steel


Contact: Mr. Bryan Floyd, Member

NAICS Codes: 331210

(2014)

2006Established:

6401 S US 127Liberty, KY 42539

www.floydgate.com

Freedom Metals Inc

1225 S 15th StLouisville, KY 40210-1860

502-637-7657

Ferrous, nonferrous, industrial & precious scrap processing & recycling base metals, headquarters


Contact: Mr. Bruce Blue, Chairman/CEO

NAICS Codes: 423510, 423930, 551114

(2014)

1983Established:

1401 W Ormsby AveLouisville, KY 40210

www.freedommetals.com

Freedom Metals Inc

194 Crucible RoadElizabethtown, KY 42701

270-982-0888

Ferrous, nonferrous, industrial & precious scrap processing & recycling base metals


Contact: Mr. Bruce Blue, Chairman/CEO

NAICS Codes: 423510, 423930

(2015)

2005Established:

PO Box 1024Elizabethtown, KY 42702-1024

www.freedommetals.com

Freedom Metals Inc

425 Gawthrop DrWinchester, KY 40391

859-744-7555

Ferrous, nonferrous, industrial and precious scrap processing and recycling base metals


Contact: Mr. Bruce Blue, Pres/Owner

NAICS Codes: 423510, 423930, 562920

(2015)

2008Established:

Fuel Total Systems Kentucky Corporation

535 Corporate DriveLebanon, KY 40033

270-692-1117

Manufacture and supply automotive plastic fuel tank systems and fuel filler pipe systems


Contact: Mr. Tatsutoshi Takashima, Pres

NAICS Codes: 326199, 332996

(2014)

2010Established:

12/29/2015 Page 15 of 47

GCH International Inc

330 Boxley AvenueLouisville, KY 40209

502-636-1374

Bulk materials handling equipment, conveyors & storage bins. Polishing & CNC punching; industrial sheet metal & stainless steel fabricating, custom sheet metal fabrication; HVAC Duct, process equipment.


Contact: Mr. John Thornton, Pres/CEO

NAICS Codes: 332312, 332322, 333921, 333922, 551114

(2015)

1941Established:


www.gchintl.com

General Products Corporation

188 Earl Davis DrRussellville, KY 42276

270-726-6126

Machining and assembly of cast iron and aluminum castings to manufacture products for the automotive and heavy-duty truck industries


Contact: Mr. Stan Edger, Plant Mgr

NAICS Codes: 332710, 332999, 336390

(2014)

2004Established:

www.general-products.com

Gerdau

12612 Avoca RdLouisville, KY 40223-4708

502-245-0256

Reinforcing steel sales, detailing and fabrication.


Contact: Mr. Gregory R. Fleitz, Sls Dir

NAICS Codes: 332312

(2014)

1965Established:

www.gerdau.com

Gerdau Calvert City Mill

1035 Shar-Cal RdCalvert City, KY 42029

270-395-3100

Structural steel mill: angles, channels, flats and misc. channel


Contact: Mr. Jim Christina, VP/Genl Mgr

NAICS Codes: 331110, 332312, 332510

(2015)

1983Established:

www.gerdau.com/longsteel

Gibbs Die Casting Corp

KOCH Enterprises Inc

369 Community DrHenderson, KY 42420-4397

270-827-1801

Aluminum die castings & Gibbs headquarters


Contact: Mr. Steve Church, Pres

NAICS Codes: 331523, 332999, 551114

(2015)

1966Established:

www.gibbsdc.com

Great Northern Building Products LLC

901 South 15th StreetLouisville, KY 40210

502-266-6662

Manufacturer and distributor of specialty building materials, such as nails, brackets, vents slate roofing and flooring, industrial roofing products, shutters and drywall tools.


Contact: Mr. Carroll Mackin Jr, Owner

NAICS Codes: 331318, 331491, 332618, 333120, 423320, 42351

(2015)

2001Established:

www.gnbuilding.com

Greenlee Textron

4601 E Indian TrailLouisville, KY 40213

502-966-2508

Manufacturer of industrial tools and parts including hand tools and battery-operated.


Contact: Mr. Fred Miller, Facility Mgr

NAICS Codes: 332216, 333991

(2015)

N/AEstablished:

http://www.greenlee.com/

12/29/2015 Page 16 of 47

H&S Gate, Inc.

232 Fields RoadRussell Springs, KY 42642

606-679-5090

Gate manufacturing


Contact:

NAICS Codes: 332312

(2015)

2015Established:

P.O. Box 307Russell Springs, KY 42642

Hafendorfer Machine Inc

550 O'Bryne Ave.Louisville, KY 40223

502-244-3669

Machining, sheet metal fabricating, forming, cutting


Contact: James Hafendorfer, Pres

NAICS Codes: 332999

(2015)

1994Established:

www.hafendorfer.com

Hanner Machine Co

130 Pond River Colliers RdMadisonville, KY 42431-8561

270-821-0947

Machine shop: precision machining, fabricated steel, hard chrome plating, custom welding, hydraulic cylinders & components


Contact: Mr. Randy Hanner, Co-Owner

NAICS Codes: 332312, 332813, 333318

(2014)

1976Established:

www.hannermachine.com

Harbor Steel & Supply Corp

2381 Innovation DriveLexington, KY 40511-1085

859-255-7884

Steel service center: metal cutting, burning & shearing, laser cutting, press brake, saw cutting


Contact: Ms. Melissa Marcum, Div Mgr

NAICS Codes: 423510, 493110

(2014)

1995Established:

www.harborsteel.com

Harris Engineering Inc

999 Broadway StBarlow, KY 42024-9616

270-334-3633

Bipods for guns & rifles; adapters


Contact: Mrs. Edna Harris, Pres

NAICS Codes: 332999

(2015)

1975Established:

Harry Gordon Steel Co Inc

695 N Main StreetWinchester, KY 40391

859-255-2442

Fabricated structural metal/steel manufacturing


Contact: Mr. Ben Norris, Pres

NAICS Codes: 332312

(2015)

2014Established:

PO Box 330Winchester, KY 40392

Heartland Automation LLC

106 Supply CourtGeorgetown, KY 40324

502-868-7638

Custom industrial automation equipment design & build including turn key integration on customer site. Robotic work cells, conveyors, material handling & assembly machinery, headquarters.


Contact: Mr. Scott McElmurray, VP/Genl Mgr

NAICS Codes: 332710, 333514, 333922, 333992, 551114

(2014)

2001Established:

www.ici-ky.com

HEC Manufacturing Inc

222 W John Rowan BlvdBardstown, KY 40004-9103

502-331-9500

Custom structural steel fabricating, steel returnable containers (racks or pallets)


Contact: Mr. Leo Essex, Pres

NAICS Codes: 332312

(2014)

1997Established:

12/29/2015 Page 17 of 47

Huff Technologies Inc

325 Industrial RdMorganfield, KY 42437

270-389-4833

PC and PLC based systems to test production engines and sub-systems. Custom testing, assembly and inspections equipment. Process machinery and systems for automotive and industrial. Pallatizers


Contact: Mr. Darrel Huff, Owner/Pres

NAICS Codes: 332999, 333318, 334513, 334519

(2014)

1998Established:

www.huff-tech.com

Ideal Machine & Tool Inc

7150 Distribution DrLouisville, KY 40258-2825

502-995-5751

General machine shop, CNC milling & turning, press operations, dies & fixtures


Contact: Mr. Dennis Bradley, Pres

NAICS Codes: 332710, 333514

(2015)

2004Established:

IDT Tools Inc

108 Corporate DriveFrankfort, KY 40601-8311

502-848-5858

Produce die components and stamping dies.


Contact: Mr. Yoji Nakamura, Pres

NAICS Codes: 333514

(2015)

2003Established:

Imperial Tool & Manufacturing Co Inc

725 Westland DrLexington, KY 40504-1015

859-231-6127

Design and builder of molds, tools, dies, fixtures, gauges as well as product development


Contact: Mr. David Meeks, Pres

NAICS Codes: 326199, 333514

(2014)

1966Established:

www.imperialtool.com

Industrial Carbide Saw & Tool

3810 Bishop LnLouisville, KY 40218-2974

502-968-8104

Carbide tipped cutting tools; band saw, segmental & inserted saw blades, strapping, fittings & knives, stretch film, plastic and steel banding, sharpening services


Contact: Mr. C. J. Crush Jr., Pres

NAICS Codes: 332216, 333243, 333515, 333517, 811310

(2015)

1970Established:

www.icstc.com

Industrial Machine Services Inc

83 State Route 85 WSacramento, KY 42372-9533

270-736-2283

Machine shop: general machining, sheet & plate steel fabricating & equipment repair; pins and bushings for mining industry.


Contact: Mr. Barry L. Ellis, Owner

NAICS Codes: 332312, 332710, 811219

(2014)

1989Established:

www.industrialmachine.info

Industrial Mold & Machine Co

1101 Wing AveOwensboro, KY 42303-0867

270-684-3668

Machine shop: general, CNC & electrical discharge machining; injection & blow molds; arc, MIG & TIG welding; mill & lathe work. Waterjet cutting service.


Contact: Mr. Tom Jones, Vice Pres

NAICS Codes: 333318, 333514, 811310

(2014)

1986Established:

www.immci.com

Indy Honeycomb

1016 Mary Laidley DrCovington, KY 41017

859-359-4052

Welded metallic honeycomb


Contact: Mr. Don Prysi, Pres

NAICS Codes: 332999

(2014)

1996Established:

www.indyhoneycomb.com

12/29/2015 Page 18 of 47

International Identification Inc

dba National Band & Tag Co

721 York StNewport, KY 41072-0430

859-261-2035

Animal identification tags, including livestock ear tags, poultry wing bands, metal & bar coded identification tags


Contact: Mrs. Faye Wendel, Pres

NAICS Codes: 332119, 332999

(2015)

1902Established:

PO Box 72430Newport, KY 41072-0430

www.nationalband.com

International Mold Steel Inc

Sub Okaya (U S A) Inc

6796 Power Line DrFlorence, KY 41042-3093

859-342-6000

Specialty steel distributor and service center: Steel cutting, tool steel & mold steel. Machining, grinding, milling, and gun drilling


Contact: Mr. Thomas Schade, Exec VP

NAICS Codes: 332710, 423510

(2014)

1997Established:

www.imsteel.com

Iron Works Enterprises Inc

3901 Pennebaker AvenueBardstown, KY 40004

502-348-4001

Fabrication, industrial maintenance and repair. Structural steel erection.


Contact: Mr. Todd Durbin, Owner

NAICS Codes: 238120

(2015)

2008Established:

ITW Powertrain Fastening

ITW Powertrain Metals

2001 Buck LnLexington, KY 40511-1074

859-255-6400

Metric screws, fastener assemblies and suspension end links


Contact: Mr. Tim Swanson, Genl Mgr/VP

NAICS Codes: 326199, 332722, 333514, 336310, 336330, 33639

(2015)

1956Established:

www.itwpf.com

J & K Tool

701 West Main StreetCampbellsville, KY 42718-9505

270-465-3449

Machine shop: general machining, tool & die. Parts for various local busnisses.


Contact: Mr. John Hedgespeth, Owner/VP

NAICS Codes: 332710, 333514

(2014)

1992Established:

J R Buck Industries

600 Adcolor DriveLexington, KY 40511

859-288-7543

Custom metal fabrication services: MIG & TIG welding, CNC milling & turning, Stamping and die building, engineering & design services, and assemblies. We excel in low to medium production orders.


Contact: Mr. James Buck, Pres

NAICS Codes: 332119, 332439, 332710, 332999, 333514, 33392

(2014)

2006Established:

www.jrbuckindustries.com

12/29/2015 Page 19 of 47

J R Hoe & Sons Inc

N 19th StMiddlesboro, KY 40965

606-248-5560

Iron castings, gray and ductile; pattern tooling services; CNC machined castings; prototypes; metal fabrications-steel, stainless and aluminum; AISC structural and miscellaneous; autoCAD design and engineering.


Contact: Mr. Harry H. Hoe, Pres

NAICS Codes: 331511, 332312, 332710, 332721

(2015)

1909Established:

PO Box 1737Middlesboro, KY 40965-3737

www.jrhoe.com

Jackson Tool & Mold LLC

1853 Petersburg RdHebron, KY 41048-9506

859-586-8242

Tool & mold, CNC machining, large or small machine parts run production


Contact: Ms. Wanda Jackson, Owner

NAICS Codes: 326199, 333318, 333514

(2014)

1982Established:

Jay Gee Manufacturing

Div Griffin Industries Inc

191 Bradford RoadButler, KY 41006-9675

859-472-7511

Machine shop: drilling & boring, arc, gas, MIG & TIG welding; sheet, plate & structural metal fabricating


Contact: Mr. Daniel Ferguson, Genl Mgr

NAICS Codes: 332312, 332313, 332710

(2015)

1971Established:

www.darlingii.com

Jennmar of Kentucky Inc

Div Jennmar Corp

271 Gawthrop DrWinchester, KY 40391-8910

859-744-9600

Ground control products for mining and tunneling made out of flat and round stock steel.


Contact: Ms. Melissa Cockrell, HR Mgr

NAICS Codes: 332312, 336510

(2015)

1981Established:

PO Box 501Winchester, KY 40392-0501

www.jennmar.com/

Jennmar of West Kentucky Inc

860 Sandcut RdEarlington, KY 42410

270-383-3171

Manufacture steel roof support systems used in underground mining and tunneling


Contact: Mr. Jeff Reeves, Sls Mgr

NAICS Codes: 332312, 332722

(2015)

2006Established:

www.jennmar.com

Jero Inc

7430 Empire DrFlorence, KY 41042

859-342-5858

Stub ends, buttweld pipe fittings, 1/2' thru 60", stainless steel, high nickel alloys, aluminum, copper nickel; also custom machining, Non Destructive Testing (NDT) X-Ray, Ultrasonic. Alloy Identifacation, Rockwell hardness testing.


Contact: Mr. Donnie Boyers, Pres/Owner

NAICS Codes: 332996

(2013)

1976Established:

www.jeroinc.com

12/29/2015 Page 20 of 47

JMS Russel Metals Corp

1455 Bloom AvePaducah, KY 42001-7058

270-575-0308

Metal sales, processing, distributing & light manufacturing, mainly sawing & burning


Contact: Mr. Dan Bailey, Regl Mgr

NAICS Codes: 331221

(2014)

1999Established:

www.jmsmetal.com

Jones Ornamental Iron

10115 Tom Jones DriveRush, KY 41168

606-928-6909

Structural steel, ornamental & structural iron fabricating; arc welding. Custom made swing or slide gates.


Contact: Mr. Thomas G. Jones, Owner

NAICS Codes: 332312, 332323, 811310

(2014)

1946Established:

PO Box 196Rush, KY 41168

www.jonesornamentaliron.com

Karr Industries Inc

1170 Young Cemetery RdCorbin, KY 40701-8883

606-528-8757

Machine shop: tool & die; machinery parts; tool and die manufacturing replacement parts for local manufacturers


Contact: Mr. Rondal Karr, Pres

NAICS Codes: 332710, 333318, 333514

(2015)

1981Established:

Ken-Tron Mfg Inc

610 Industrial DrOwensboro, KY 42301-0187

270-684-0431

Wire drawing & precision stampings for aerospace, electronics, battery, medical, automotive and television products.


Contact: Mr. Robert Hudson, Chairman

NAICS Codes: 331222, 332119

(2015)

1960Established:


www.ken-tron.com

Kentuckiana Curb Co/KCC International Inc

2716 Grassland DrLouisville, KY 40299-2526

502-491-9880

Metal components, roof curbs, manufacture of retrofit air condition for restaurant industry,and high efficency HVAC commercial units


Contact: Mr. Albert Fiorini, Pres

NAICS Codes: 332999

(2015)

1987Established:

www.kcccurbs.com

Kentucky Advanced Forge LLC

596 Triport RoadGeorgetown, KY 40324-9529

502-863-3646

Forged bearing components


Contact: Mr. Jim Spurlock, Plant Mgr

NAICS Codes: 332111

(2015)

2002Established:

Kentucky Electric Steel

2704 South Big Run RdAshland, KY 41102-2119

606-929-1200

Steel flat bars and round bars


Contact: Mr. John Scheel, Genl Mgr

NAICS Codes: 331110

(2014)

2004Established:

PO Box 2119Ashland, Ky 41105-2119

www.kentuckyelectricsteel.com

12/29/2015 Page 21 of 47

Kentucky Machine & Tool Co

3107 Millers LnLouisville, KY 40216-5345

502-774-5733

Machine shop: general & CNC machining, repairing, tool & die, jigs & fixtures, welding, drilling, boring, cutting, honing, lathe & mill work


Contact: Mr. Maurice Meisner, Ch of Bd

NAICS Codes: 332710, 333514

(2014)

1925Established:

Kentucky Mountain Industries

200 Industrial Park RdManchester, KY 40962

606-598-8641

Cold rolled, brass, CRS & stainless steel automotive stampings; plumbing fixtures & appliance parts, other types of metals stampings; tool & die. Outsourcing capabilities of: coating, plating (decorative and functional), deburring.


Contact: Mr. Jimmy Chesnut, Pres

NAICS Codes: 332119, 332913, 333514, 336370

(2014)

1977Established:

PO Box 368Manchester, KY 40962-0368

www.kmi-inc.net

Kentucky Ornamental Iron

1047 Goodwin DrLexington, KY 40505-3809

859-255-7791

Architectural metal, brass, aluminum & ornamental iron products, entrance gates, railings & spiral staircases, fencing


Contact: Mr. Brad Ellis, Owner/Pres

NAICS Codes: 332323

(2015)

1961Established:

www.kentuckyornamentaliron.com

Kentucky Steel Center Inc

Sub Nippon Steel and Sumikin Bussan Corp

1101 Mayde RdBerea, KY 40403-9723

859-986-0572

Steel service center: coil slitting and steel sheets


Contact: Mr. Seiji Motoni, Pres

NAICS Codes: 423510

(2014)

1996Established:

www.kentuckysteel.com

Kerco Inc

1671 Progress DriveMadisonville, KY 42431

270-821-2889

Mining equipment, parts, and service, custom fabricator


Contact: Mr. Chuck Reed, CEO

NAICS Codes: 332312, 332313

(2015)

1963Established:

P.O. BoxMadisonville, KY 42431

www.kerco.net

Kevil Tool & Machine MFG Inc

668 Veterans AveKevil, KY 42053

270-462-2178

Machine shop: general & CNC machining, drilling, boring, cutting, tool & die


Contact: Mr. Paul R. Owen, Pres

NAICS Codes: 332710, 333514

(2014)

1969Established:

PO Box 190Kevil, KY 42053-0190

www.keviltoolandmachine.com

12/29/2015 Page 22 of 47

KI (USA) Corporation

Sub Keiaisha Co Ltd

501 Mayde RdBerea, KY 40403-8730

859-986-1420

Machined, metal stamped & cationic painted automotive parts & components, arc & resistance welding


Contact: Mr. Shigeru Oi, Pres

NAICS Codes: 332999, 336370, 336390

(2014)

1989Established:

www.kiusa.com

Kintec LLC

5801 Haunz LnLouisville, KY 40241-1407

502-241-9456

Wooden roof & floor trusses, light gauge steel trusses


Contact: Mr. Keith E. Kinser, Pres

NAICS Codes: 321214, 332312

(2014)

1976Established:

PO Box 587Pewee Valley, KY 40056-0587

www.kintectruss.com

Knight's Mechanical LLC

4250 Leitchfield RdCecilia, KY 42724-9642

270-765-4141

Process piping, sheet metal fabrication, industrial welding, steel fabrication, equipment setup, design build, and bid projects


Contact: Mr. John Knight, Pres

NAICS Codes: 332322, 332710, 423510, 811310

(2014)

1980Established:

www.knightsmechanical.com

Lawless Welding Inc

938 W Steve Warriner DrRussell Springs, KY 42642-4542

270-866-5416

Arc, gas, MIG, TIG, heliarc & aluminum welding; structural steel fabricating; cutting & shearing; weldments; fuel oil tank distributor. Manufacture of recycling trailers.


Contact: Mr. Gene V. Smith, Pres

NAICS Codes: 332312, 332313, 811310

(2014)

1954Established:

www.lawlesswelding.com

LB Manufacturing

360 Industry DrSpringfield, KY 40069-1506

859-336-0090

Robotic and manual MIG welding of carbon and stainless steels, resistance (spot) welding, resistance seam welding, automotive glass assembly, light and medium stamping


Contact: Mr. Dwayne Hogan, Plant Mgr

NAICS Codes: 333514

(2013)

1998Established:

PO Box 232Springfield, KY 40069-0232

www.leanbmfg.com

Legacy Mold & Tool Inc

4525 Springfield RdBardstown, KY 40004-8948

502-348-8151

Tool & die: plastic injection molds, jigs & fixtures


Contact: Mr. Gary Proctor, Pres

NAICS Codes: 326199, 333511, 333514

(2015)

1997Established:

Lesco Design & Manufacturing Co Inc

1120 Fort Pickens RdLa Grange, KY 40031-9213

502-222-7101

Steel fabricators: conveyors, cranes and related material handling equipment and vehicle loading ramps


Contact: Mr. Lance Kaufman, CEO

NAICS Codes: 332311, 332312, 333922

(2014)

1961Established:

www.lesco-design.com

12/29/2015 Page 23 of 47

Lily Gate Co

735 Loop RdHustonville, KY 40437-9015

606-346-4403

Metal farm gates; farm related, feeding facilites


Contact: Ms. Nell Duggins, Secy

NAICS Codes: 332323

(2015)

1991Established:

www.lilyfarmgate.com

Lincoln Tool Inc

200 Commerce PkwyHodgenville, KY 42748-9400

270-358-9698

Precision tool & die manufacturing. Build special machines to manufacturing specs. Build molds and repair machines and parts


Contact: Mr. Otto Woodall, Owner/Pres

NAICS Codes: 333514, 333999

(2015)

1994Established:

Logan Corporation

740 Honeybranch Industrial ParkDebord, KY 41214

606-298-2000

Metals service center: steel cutting, slitting, shearing, burning, forming and braking. Mining supplies for surface and underground. Fire suppression installations and service, custom dumptruck body manufacturing


Contact: Mr. Zachary M. Taylor, Pres

NAICS Codes: 332322, 423510

(2015)

1938Established:

www.logancorp.com

Louisville Ladder Inc

7765 National TurnpikeUnit 190Louisville, KY 40214

502-636-2811

Corporate headquarters and distribution center. Louisville Ladder Inc is a wholesale distribution of ladders and related climbing products to retailers and industrial users.


Contact: Mr. Ricardo Clausse, Pres

NAICS Codes: 326199, 332999, 551114

(2015)

1946Established:

www.louisvilleladder.com

Louisville Metal Hose

Air Hydro Power Inc

2550 Blankenbaker ParkwayLouisville, KY 40299-2467

502-361-2300

Specialized industrial distributor and local fabrication of industrial hose, metal hose, teflon hose, expansion joints, industrial belting: specialists in application of fluid


Contact: Mr. Thomas McGuire, VP/Owner

NAICS Codes: 326299, 332439, 332999, 493110

(2014)

1989Established:


www.airhydropower.com

Lucas Equine Equipment Inc

4161 US Highway 27 SCynthiana, KY 41031

859-234-6920

Wood & metal farm gates; steel & wood horse barn window grills, doors & stall fronts


Contact: Mr. Mike Ravenscraft, Pres

NAICS Codes: 321911, 332323

(2015)

1981Established:

PO Box 158Cynthiana, KY 41031-0158

www.lucasequine.com

M & M Manufacturing Inc

709 Sportsman Lake RdFranklin, KY 42134-7659

270-586-8208

Custom metal, aluminum and stainless steel fabricating for water and sewer industries


Contact: Ms. Jennifer McBride, Pres

NAICS Codes: 332322, 332999

(2015)

1998Established:

12/29/2015 Page 24 of 47

M C Steel and Crane Service Inc.

2 Braco Int. Blvd.Wilder, KY 41076

859-781-8600

Steel service center; products: I-beams, columns, rebar, mesh, drain tile and structural steel


Contact: Mr. Michael Chilelli, Owner

NAICS Codes: 423510, 493110

(2015)

1980Established:

www.mcsteel.com

M M I of KY

2081 Mercer RdLexington, KY 40511-1018

859-255-0070

Distributor of imbedded concrete accessories for the commercial/ industrial and highway construction industry. Full line fabricator of concrete reinforcing steel (rebar).


Contact: Ms. Megan Faircloth, Pres

NAICS Codes: 332312, 493110

(2014)

1989Established:

www.cmcmmi.com

Madison Tool & Die Inc

145 Orchard StRichmond, KY 40475-1638

859-623-2680

Tool and die making; welding jigs and fixtures.


Contact: Mr. Gary Rose, Pres

NAICS Codes: 332119, 333514

(2014)

1978Established:

PO Box 57Richmond, KY 40476-0057

Mainstream Packaging Inc

650 Hendrickson DriveLebanon, KY 40033

270-692-4640

Metals service: material handling and manufacturer of steel returnable containers for auto industry


Contact: Mr. Fredrick Clark, Owner

NAICS Codes: 332439, 423510

(2014)

2001Established:

www.mainstreamfabrication.com

Marine Systems Inc

4036 Clarks River RoadPaducah, KY 42003

270-444-0069

Machine shop: drilling, boring, cutting, honing, lathe & mill work, general machining, steel fabricating, arc & gas welding. Repair and rebuild diesel and high speed engines. Marine repair facility & authorized parts distributor/dealer.


Contact: Mr. Thomas W. Bottoms, Vice Pres

NAICS Codes: 332312, 333318, 811310

(2014)

1984Established:

P O Box 3430Paducah, KY 42002-3430

www.marinesystemsinc.com

Marmon/Keystone Corp

1155 Victory PlaceHebron, KY 41048-8294

859-586-4000

Steel service center: metal cutting


Contact: Mr. Frankie Krouse, Opers Mgr

NAICS Codes: 423510

(2014)

N/AEstablished:

www.marmonkeystone.com

Mayes Coatings & Insulation Inc

6082 Peters-London RoadReed, KY 42451

270-826-8584

Manufacturer of insulation systems for ground storage tanks, insulation panel installer. Ridglok Panel insulation systems for storage tanks.


Contact: Mr. Bob Mayes, CEO

NAICS Codes: 332312

(2015)

2004Established:

www.mayescoatings.com

12/29/2015 Page 25 of 47

McElroy Metal Inc

Div McElroy Metal Mill Inc

9435 Highway 60Lewisport, KY 42351

270-295-3196

Metal forming, panel, trim, accessories


Contact: Mr. Ian McElroy, Pres

NAICS Codes: 332312, 332322

(2014)

1964Established:

www.mcelroymetal.com

Mercer Tool & Die Inc

100 Morgan Soaper RdHarrodsburg, KY 40330-1056

859-734-0303

Tools, dies, jigs & fixtures; machine shop: general machining, drilling, boring, cutting, honing, grinding, electric welding, mill & lathe work


Contact: Mr. Robert Collier, Pres

NAICS Codes: 332710, 333511, 811310

(2014)

1994Established:

Merrick Construction Co Inc

Sub Multi Industries

3808 Ralph AveLouisville, KY 40211-2037

502-449-1234

Sheet, ornamental & structural metal fabricating


Contact: Mr. William Merrick, Pres

NAICS Codes: 332312, 332322, 332439

(2013)

1902Established:


www.merrick-kemper.com

Metal Solutions Design & Fabrication LLC

215 Main StreetDayton, KY 41074

859-282-5000

Manufacture DOT certified metal containers for nuclear waste & other hazardous products. Reusable shipping containers, airport ground support equipment, ornamental & architectural metal work.


Contact: Mr. David Berger, Genl Mgr

NAICS Codes: 238120, 332322, 332439, 332999, 541712

(2015)

2005Established:

www.msdf1.com

Metals N More Inc

1040 Old Barren River RoadBowling Green, KY 42101-5000

270-781-3642

Metal manufacturing, fabricating, and merchant wholesales, machinery welding


Contact: Mr. Malcolm Cherry, Owner

NAICS Codes: 332710, 423510

(2015)

2004Established:

www.metalsnmore.com

Metalworks Recycle-Reload LLC

199 Mitch McConnel DriveBowling Green, KY 42101

270-282-2400

Processing, packaging, shipping, receiving, and purchasing of all types of non-ferrous metals


Contact: Mr. David Bradford, Pres

NAICS Codes: 423510

(2014)

2010Established:

Metcalf Metal Inc

3324 Irvine RoadRichmond, KY 40475

859-369-3133

Steel fabrication, mfg. farm equipment, trailer sales & repairs


Contact: Mr. Mark Metcalf, Bus Mgr

NAICS Codes: 332312, 333111, 811310

(2015)

1961Established:

12/29/2015 Page 26 of 47

Mid American Metals Company

616 Bark CoveOwensboro, KY 42303-0605

270-926-3515

Metal recovery, automotive computers and mass air flow sensors;


Contact: Mr. Paul Busse, Owner

NAICS Codes: 423140, 423510

(2014)

1987Established:

Mid-America Machine Inc

92 Pioneer Industrial DrMayfield, KY 42066-9056

270-247-6909

Machine shop: cylindrical grinding, lathe & mill work, small plate & structural metal fabricating & hard chrome plating


Contact: Mr. Paul Crowell, Owner/Pres

NAICS Codes: 332312, 332313, 332710

(2015)

1987Established:

PO Box 483Mayfield, KY 42066-0483

www.midamericamachine.com

Midwest Steel Contractors

500 Industrial RdMurray, KY 42071-2195

270-753-0521

Steel structural fabricating; arc, gas, MIG, TIG & heliarc welding & steel erection


Contact: Mr. Donald Wisecup, Owner

NAICS Codes: 332312, 811310

(2015)

1968Established:

PO Box 1308Murray, KY 42071-1308

Mike Alexander Dies Inc

1134 W Kentucky StLouisville, KY 40210-1345

502-515-2777

Steel rule cutting dies flat & rotary-male & female stripping tools-male & female blanking tools-steel counters-flexographic platemaking; water jet cutting


Contact: Mr. Michael Alexander, Pres

NAICS Codes: 333514

(2014)

1984Established:

www.madies.com

Miles Enterprises LLC

2740 Keller RoadOwensboro, KY 42301-2919

270-926-2420

HQ; Service, sell, construct grain bins, tire shop


Contact: Mrs. Debra Seymour, Pres

NAICS Codes: 236220, 423390, 551114

(2014)

1995Established:

PO Box 22919Owensboro, KY 42304

Millennium Forge Inc

990 W Ormsby AveLouisville, KY 40210-1888

502-635-3350

Steel forging & fittings for valve & OEM use, custom forging-raw.Tool and Die Shop


Contact: Mr. Dan Gonring, Plant Mgr

NAICS Codes: 332111, 332919, 333514

(2014)

2000Established:

990 W Ormsby AveLouisville, KY 40210

www.millenniumforge.com

MISA Metal Fabricating Inc

MMFI

7101 International DriveLouisville, KY 40258-2832

502-933-5555

Steel processing and fabrication: plate steel cutting, machining, bending, forming, welding and CNC machining.


Contact: Mr. Mike Talis, Pres

NAICS Codes: 332999, 423510

(2014)

1989Established:

www.misametalfab.com

12/29/2015 Page 27 of 47

MISA Metal Processing Inc

7300 Global DrLouisville, KY 40258-1982

502-937-0505

Steel processing and coil slitting for material owned by our customers.


Contact: Mr. Gene Miller, Genl Mgr

NAICS Codes: 423510

(2015)

1996Established:

www.misteel.com

Mitchell Hobbs & Sons Inc

3100 Vermont AveLouisville, KY 40211-3344

502-778-7344

Custom stainless steel & sheet metal erecting & fabricating


Contact: Mr. David Hobbs, Pres

NAICS Codes: 332322, 332999

(2015)

1962Established:

www.mhobbsandsons.com

Miyama USA Inc

Miyama Kogyo Co Ltd

7081 International DrLouisville, KY 40258-2865

502-933-4100

Automotive and appliance sub-assemblies, 6 axis precise robotic welding, stamping, precise resistance welding, CNC drill & tap, CNC lathing, parts kit packaging & fulfillment services


Contact: Mr. Mark Koeberlein, Genl Mgr

NAICS Codes: 332999, 339999, 561910

(2015)

1989Established:

www.miyamausa.com

Modern Welding Co of Kentucky Inc

Div Modern Welding Co Inc

303 Steel DrElizabethtown, KY 42701-8135

270-769-1368

Structural metal manufacturing


Contact: Mr. James Prindle, VP/Genl Mgr

NAICS Codes: 332312, 332420, 811310

(2015)

1964Established:

PO Box 117Elizabethtown, KY 42702-0117

www.modweldco.com

Modern Welding Co of Kentucky Inc

Sub Modern Welding Co Inc

155 Bean Cemetery RdMadisonville, KY 42431-9678

270-821-3575

Custom structural steel & metal fabricating; arc & MIG welding


Contact: Mr. Mike Eddings, VP/Genl Mgr

NAICS Codes: 332312, 811310

(2014)

1932Established:

PO Box 1147Madisonville, KY 42431-8147

www.modweldco.com

Modern Welding Co of Owensboro

Sub Modern Welding Co Inc

1450 E Parrish AveOwensboro, KY 42303-0837

270-683-5323

Steel (cs & ss) storage tanks, pressure vessels & miscellaneous fabrication (10ga - 2" thick;<200,000#); steel forming including rolling, shearing, breaking and high-def (plasma only) burning; welding; warehouse steel sales. Headquarters.


Contact: Mr. John Austin, VP/Genl Mgr

NAICS Codes: 332312, 332420, 551114

(2014)

1932Established:


www.modweldco.com

12/29/2015 Page 28 of 47

Montebello Packaging Inc

650 Industrial DrLebanon, KY 40033-1953

270-692-5760

Collapsible aluminum tubes and aerosol cans primarily for the pharmaceutical, cosmetic, and industrial industries.


Contact: Mr. Dan Blakeman, Plant Mgr

NAICS Codes: 332999

(2015)

1999Established:

www.montebellopkg.com

Monticello Tool & Die Inc

218 Cardinal AveMonticello, KY 42633-2126

606-348-8104

Tool & die: jigs & fixtures


Contact: Mr. Danny Morgan, Pres

NAICS Codes: 333514

(2014)

1978Established:

PO Box 148Monticello, KY 42633-0148

Morehead Machining Inc

25 Lake Park DriveMorehead, KY 40351-7984

606-783-1841

Tool & die: jigs, fixtures & progressive dies, welding/fabrication


Contact: Mr. James W. Lewis, Pres

NAICS Codes: 333514

(2014)

1996Established:

www.moreheadmachining.com

Morris Tool & Plastics Inc

1383 Commonwealth DriveHenderson, KY 42420-4673

270-827-1181

Building and repair of plastic injection molds, including plastic injection molding and processing parts. ISO 9001 Certified.


Contact: Mr. Richard Morris, Pres

NAICS Codes: 326199, 332710, 333511, 561499

(2014)

1989Established:

www.morristoolplatics.net

MST Steel Corporation of Kentucky

860 Withrow CtBardstown, KY 40004-4100

502-350-4100

Slitting & cold-reduction of steel coil


Contact: Mr. Richard Thompson, Pres

NAICS Codes: 331110, 493110

(2015)

2001Established:

www.mststeel.com

Mubea Inc

6800 Industrial RdFlorence Campus OperationsFlorence, KY 41042

859-746-5300

Automotive component parts (springs, hose clamps, stabilizer

Full-time Employment: 1,400

Contact: Mr. Doug Cain, CEO

NAICS Codes: 331221, 332613, 336390

(2015)

1982Established:

www.mubea.com

Murray Mold & Die Co

506 Industrial RdMurray, KY 42071-2195

270-759-4851

Plastic injection & die cast molds & metal stampings; wire EDM & precision CNC machining


Contact: Mr. Jerry B. Duncan, Pres

NAICS Codes: 326199, 333511

(2015)

1985Established:

www.murraymold.com

National Chimney KY

211 Windsor DrMt. Sterling, KY 40353

859-498-3537

Steel stove pipes & flexible cleaning lines


Contact: Mr. Evan Havers, Mgr

NAICS Codes: 332996

(2015)

1990Established:

PO Box 798Mt Sterling, KY 40353

www.nationalchimneysupply.com

12/29/2015 Page 29 of 47

Neill-LaVielle Supply Co

Steel Warehouse Division

4575 Jennings LaneLouisville, KY 40218

502-456-2444

Steel distribution, metal processing


Contact: Mr. Robert Wuetcher, Opers Mgr

NAICS Codes: 423510

(2014)

1954Established:

www.neill-lavielle.com

Niemco Fabricators Inc

1600 Northwestern PkwyLouisville, KY 40203-1454

502-584-7721

Steel and stainless steel fabricating with machine shop and 2 lasers.


Contact: Mr. John Hodgin, Pres

NAICS Codes: 332312, 332710, 333922

(2015)

1983Established:

Nisshin Automotive Tubing LLC

107 Fieldview DriveVersailles, KY 40383-1532

859-879-6067

Stainless steel automotive tubing


Contact: Mr. Satoshi Steve Migita, Pres

NAICS Codes: 331210

(2012)

2005Established:

Nooyen Manufacturing Inc

111 Adena DrMt. Sterling, KY 40353-9069

859-497-4429

Manufacture galvanized steel pig flooring


Contact: Mr. Hubert Verhofstadt, Vice Pres

NAICS Codes: 332312

(2014)

1997Established:

www.nooyenky.com

North American Stainless

6870 Highway 42 EGhent, KY 41045-9615

502-347-6000

Stainless steel flat products - coils, sheets, strips, plates and stainless steel long products - bar, wire, rod, rebar, angles

Full-time Employment: 1,314

Contact: Mr. Cristobal Fuentes, Pres

NAICS Codes: 331110, 331221

(2015)

1990Established:

www.northamericanstainless.com

Nucor Steel Gallatin

4831 US Highway 42 WestGhent, KY 41045

859-567-3100

Flat rolled steel coils


Contact: Mr. John Farris, VP Opers/GM

NAICS Codes: 331110, 331221

(2015)

1993Established:

www.nucorsteel.com

OCTA Inc

3603 Mattingly RdBuckner, KY 40010-8803

502-222-8985

Tube specialist - cutting, bending, forming, etc. (I.e., copper, aluminum, etc.); manufacturing of parts and assemblies for refrigeration, HVAC, etc.


Contact: Ms. Joann Adams, Pres

NAICS Codes: 332999

(2014)

1987Established:


www.octainc.com

12/29/2015 Page 30 of 47

Olympic Steel Inc

Mt Sterling

3379 Owensville RdMt. Sterling, KY 40353

859-499-4188

Processing, machining, and handling of steel between producers and manufacturers


Contact: Mr. Jeremy Thiessen, Genl Mgr

NAICS Codes: 423510

(2014)

2011Established:

175 Clarence DrMt Sterling, KY 40353

www.olysteel.com

Omni Materials Inc

Augusta, KY

Marketer of lime by-products, primarily used as road foundations


Contact:

NAICS Codes: 423390

(announced)

2015Announced:

On Time Fab Inc

3021 Medley RoadOwensboro, KY 42301

270-686-0105

Steel fabrication


Contact: Mr. Ray Middleton, Pres

NAICS Codes: 332999

(2014)

2007Established:

Owensboro Manufacturing LLC

3001 Tamarack RdOwensboro, KY 42301-6565

270-729-4242

Metal stampings, production machining, & fabricated metal products


Contact: Mr. Kevin Booth, Pres

NAICS Codes: 332119, 332721, 333514

(2014)

1999Established:

PO Box 1598Owensboro, KY 42302

www.TheHinesGroup.com

PEBCO Inc

Manufacturing

3885 Coleman RoadPaducah, KY 42001

270-442-1996

Manufactured/fabricated metal products & equipment used for bulk materal handling


Contact: Mr. Thomas Scott, Pres/CEO

NAICS Codes: 332999, 333922

(2014)

2004Established:

PO Box 7506Paducah, KY 42002-7506

www.pebco.com

Perfect Patterns Central Inc

3841 Vincent Station DrOwensboro, KY 42303-9315

270-683-3930

Wood, metal & plastic industrial patterns, dies and molds.


Contact: Mr. Greg Van Nuland, Plant Mgr

NAICS Codes: 332999

(2014)

1998Established:

www.perfectpatterns.com

Phillips Diversified Mfg Inc

80 Carpenter DrJackson County Industrial ParkAnnville, KY 40402

606-364-2750

Metal fab and assembly, mechanical and electronic assembly, vacuum form molding and metal fabrication


Contact: Ms. Donna Bray, Persnl Mgr

NAICS Codes: 332312

(2014)

1994Established:

PO Box 250Annville, KY 40402-0250

www.phillipsdminc.com

12/29/2015 Page 31 of 47

Phoenix Products Inc

106 Bethford RdMcKee, KY 40447

606-965-3333

Metal and composite products for the military, and upholstery products, metal bending and manufacturing


Contact: Mrs. Peggy Wilson, CEO

NAICS Codes: 332510, 332710, 332999, 335991, 336413, 54151

(2014)

1995Established:

www.acstuff.com

Piccola Manufacturing Co

985 Old Preston Hwy SShepherdsville, KY 40165-5455

502-955-8299

Materials handling equipment: racks; shipping containers, custom steel, stainless steel & aluminum fabricating & robotic welding, laser cutting


Contact: Mr. Richard A. Eschman, Pres

NAICS Codes: 332312, 332322, 332999

(2015)

1950Established:

PO Box 705Shepherdsville, KY 40165-0705

www.piccolamfg.com

Pilot Steel Inc

2301 Triad DriveOwensboro, KY 42301

270-684-8030

Fabricated structural steel


Contact: Mr. Ray Assmar, Owner

NAICS Codes: 332312

(2015)

2002Established:

www.pilotsteel.com

Piper's Saw Shop Inc

454 Philliip Stone WayCentral City, KY 42330-1507

270-754-2354

Saw blades & sharpening service


Contact: Mr. Jimmy Piper, Pres

NAICS Codes: 332216, 811310

(2014)

1989Established:

PO Box 30Central City, KY 42330-0030

www.piperssawshop.com

P-K Tool & Manufacturing Co

300 Duncannon LnRichmond, KY 40475-9603

859-623-0300

Metal stampings, production machining, fabricating & assembly; complete stamping die construction; nylor dip coating; robotic & resistance welding.


Contact: Mr. Darrin Nunley, Plant Mgr

NAICS Codes: 332119, 333514, 336370

(2014)

1994Established:

www.pktool.com

Plastisud

95 Industrial Park RoadMount Vernon, KY 40456

606-256-1947

Tools & dies, plastic injection & thermoform molds


Contact: Mr. Laurent Buzzo, Pres

NAICS Codes: 333511

(2014)

1989Established:

PO Box 3109Mount Vernon, KY 40456

www.plastisud.com

12/29/2015 Page 32 of 47

Plymouth Engineered Shapes

Div Plymouth Tube Co

201 Commerce CtHopkinsville, KY 42240-9200

270-886-6631

Stainless, carbon & alloy steel extrusions; special & structural titanium & nickel base shapes


Contact: Mr. David Crouch, Genl Mgr

NAICS Codes: 331221, 331491, 332510

(2014)

1980Established:

www.plymouth.com/extrusions

Porter Steel & Fabrication Inc

8488 Rt 1428Allen, KY 41601

606-874-2129

Develops and constructs specialized metal and steel structures, equipment; material handling products; steel products and fabrication for mining and aggregate industry.


Contact: Mr. Frank Porter, Pres

NAICS Codes: 332312, 423990

(2015)

1996Established:

PO Box 358Allen, KY 41601-0358

[email protected]

Portland Forge

Div of Allegheny Technologies Co

400 Corporate DrLebanon, KY 40033

270-692-3554

Custom impression steel die forgings for truck & farm machinery industries


Contact: Mr. Greg Drane, Opers Mgr

NAICS Codes: 332111

(2014)

1990Established:

PO Box 674Lebanon, KY 40033-0674

www.portlandforge.com

Powerhead Machine Inc

125 Charlie Norris RoadRichmond, KY 40475

859-369-5154

Factory services/steel fabrication/sales


Contact: Mr. Harold Bingham, Pres

NAICS Codes: 332312, 332710

(2014)

1971Established:

Precision Machine Inc

1231 S 3rd StPaducah, KY 42003-1611

270-443-8444

Machine shop: industrial repairing, metal & plastic fabricating, arc & gas welding, millwright services


Contact: Mr. Buel Alexander, Pres

NAICS Codes: 332312, 332710, 336611

(2015)

1964Established:

PO Box 2753Paducah, KY 42002-2753

www.precisionmachineinc.com

Precision Steel LLC

6062 Industrial ParkwayCalvert City, KY 42029

270-395-5665

AISC and ASME certified. We have blasting and painting facilities for sophisticated paint systems. We build structural steel buildings, large/heavy custom fabrications such as bag-houses, ductwork, pressure vessels, tanks, and barges.


Contact: Mr. Brent Wyatt, CEO

NAICS Codes: 332312, 332313, 332410, 332420, 332999

(2014)

2001Established:

PO Box 1465Calvert City, KY 42029

www.precisionsteelonline.com

12/29/2015 Page 33 of 47

Precision Strip Inc

Plt 3

4001 Hardison RdWoodburn, KY 42170

270-542-6100

Steel, aluminum & copper processing & slitting service


Contact: Mr. Nick Moorman, Genl Mgr

NAICS Codes: 331110, 331314, 561439

(2014)

1994Established:

4001 Hardison RdWoodburn, KY 42170

www.precision-strip.com

Precision Tube Inc

1025 Fortune DriveRichmond, KY 40475

859-623-5595

Tube fabricating, wire forming, forklift components and CNC machining


Contact: Mr. Mark Gentry, Pres

NAICS Codes: 332618, 332710, 332996

(2014)

1979Established:

www.ptube.net

Pride Industries Inc

14432 State Route 141 SouthPride, KY 42404-7310

270-333-9552

Steel & aluminum standing seam roofing, preformed metal shingles.


Contact: Mr. Luke Pride, Pres

NAICS Codes: 331221, 331318

(2014)

1978Established:

14432 State Route 141 SouthClay, KY 42404-7310

www.prideindinc.com

Progress Rail Services Corp

11209 Electron DrLouisville, KY 40299

800-741-7112

Structural steel & aluminum fabricating; railroad signal equipment, electronic enclosures


Contact: Mr. Benjamin Stamford, Plant Mgr

NAICS Codes: 332312, 332322, 336510

(2014)

1972Established:

www.progressrail.com

PTC Seamless Tube Corp

500 Frank Yost LnHopkinsville, KY 42240-6817

Produce seamless steel tubes for the energy industry, such as oil country tubular goods (OCTGs), which include high strength tube products used in oil and gas wells and certain other industrial applications.


Contact:

NAICS Codes: 331210

(announced)

2013Announced:

Quality Fabrication Inc

555 Brown LaneMadisonville, KY 42431

270-824-9791

Machine shop: general, CNC lathe, & mill machining, sheet, plate, ornamental & structural metal fabricating


Contact: Mr. Dale Holt, Pres

NAICS Codes: 332312, 332313, 332710, 333318

(2015)

1982Established:

Quality Tooling Inc

14228 US Highway 41-ACorydon, KY 42406-9701

270-533-9263

Tools, steel dies, jigs & plastic injection molds


Contact: Mr. J. Michael Alvey, Pres

NAICS Codes: 333514

(2014)

1968Established:

www.qualitytoolinginc.com

12/29/2015 Page 34 of 47

R & S Godwin Truck Body Co LLC

5168 S US Hwy 23Ivel, KY 41642

606-874-2151

Steel & aluminum fabricating: dump truck bodies & trailers


Contact: Mr. James Godwin Sr, Owner/Mgr

NAICS Codes: 332312, 332322, 336211

(2015)

1968Established:

PO Box 420Allen, KY 41601-0420

www.rstruckbody.com

R C Bratcher Welding Service

Radiator & Automotive

2386 Windhaven DrOwensboro, KY 42303-0955

270-684-5256

Arc, heliarc, MIG & TIG welding; custom metal fabricating; radiator service and sales, automotive repair shop


Contact: Mr. Gary Bratcher, Pres/Owner

NAICS Codes: 332322, 332999, 811310

(2014)

1992Established:


www.rcbratcher.com

Republic Conduit Manufacturing

7301 Logistics DriveLouisville, KY 40258

800-840-8823

Republic ConduitTM is a domestic producer of EMT, IMC, and rigid electrical steel conduit. Republic Conduit is an ISO 9001:2008, ISO 14000, ISO 18000 and UL certified company.


Contact: Mr. Joost Grubben, Pres

NAICS Codes: 331210

(2014)

2006Established:

www.republicconduit.com

Revere Packaging LLC

39 Pearce Industrial RdShelbyville, KY 40065-8125

502-633-1404

Aluminum foil containers & plastic dome food covers


Contact: Mr. J. P. Wherry, Pres

NAICS Codes: 326199, 332999

(2014)

1967Established:

www.reverepackaging.com

Riggs Machine & Fabricating Inc

3850 Belford StAshland, KY 41101-3144

606-324-0090

Machine shop: CNC, general machining; welding; mill & lathe work; sheet, plate, structural metal fabricating; industrial machine and parts repairing


Contact: Mr. John Bert Riggs, Pres

NAICS Codes: 332312, 332313, 332710

(2014)

1981Established:

www.riggsmachine.com

Roll Forming Corp

1070 Brooks Industrial RdShelbyville, KY 40065-9141

502-633-4435

Headquarters; expertise in the design and production of roll formed products for a broad range of industries. From transportation and construction projects to renewable energy, aerospace, and everything in between.


Contact: Mr. Ray Leathers, Pres

NAICS Codes: 332114, 332999, 551114

(2014)

1947Established:

PO Box 369Shelbyville, KY 40066-0369

www.rfcorp.com

12/29/2015 Page 35 of 47

Roller Die & Forming Co Inc

1172 Industrial BlvdLouisville, KY 40219-1889

502-969-1327

Custom roll formed metal shapes, tool & die for solar industry


Contact: Mr. H. Ray Hammons, Pres

NAICS Codes: 331491, 332999, 333514

(2015)

1951Established:

www.rollerdie.com

Royster's Machine Shop LLC

215 US Highway 41 SHenderson, KY 42420-3850

270-826-3396

Machine shop: general & CNC machining, drilling, boring, cutting, honing, custom grinding, steel fabricating, arc & gas welding, lathe & mill work, production machining


Contact: Mr. R. Michael Royster, Pres

NAICS Codes: 332312, 332710, 333318

(2015)

1975Established:


www.roystersmachine.com

Ryerson Inc

920 Old Brunerstown RdShelbyville, KY 40065-9132

502-633-7770

Aluminum & stainless steel processing


Contact: Mr. Edward Wawrzynski, Genl Mgr

NAICS Codes: 331492, 332439, 332999

(2014)

1990Established:

www.ryerson.com

S & S Tool & Die Inc

3290 Hathaway RdUnion, KY 41091-8112

859-384-4303

Machine shop: cutting, boring, drilling, honing, general machining, tool & die


Contact: Mr. John D. Smith, Pres

NAICS Codes: 332710, 333514

(2014)

1991Established:

S & S Tool & Machine Co Inc

13045 Middletown Industrlal BlvdLouisville, KY 40223-4762

502-254-5401

Machine shop: CNC machining, production parts, gauges & checking fixtures


Contact: Mr. George Copeland, Plant Mgr

NAICS Codes: 332710, 333514, 333515

(2015)

1993Established:


S & S Tool & Machine Co Inc

910 N English Station RdLouisville, KY 40223-4730

502-245-3481

Machine shop: precision machined parts, gauges & fixtures


Contact: Mr. Charles Siegel Jr, Pres

NAICS Codes: 333318, 333514, 333515

(2015)

1967Established:


www.iglou.com/sstool

S & V Fabrication

1306 Pleasant Valley RdOwensboro, KY 42303-9619

270-684-9651

Steel, aluminum & stainless steel fabricating, mechanical contractors


Contact: Ms. Jennifer Vogel, Pres

NAICS Codes: 332312, 332322, 332999, 811310

(2014)

1964Established:

www.sg-ky.com

12/29/2015 Page 36 of 47

Saturn Machine & Welding Co

223 N Willie Pride RdSturgis AirportSturgis, KY 42459

270-333-2104

Specialty machinery, structural jam cleaners & pollution control equipment; steel fabricating


Contact: Mr. Billy C. Baird, Owner

NAICS Codes: 332312, 333249, 333413

(2014)

1964Established:

PO Box 69Sturgis, KY 42459-0069

www.saturnmachine.net

Schuler Machine and Tool Co

1500 S 10th StLouisville, KY 40210-2316

502-637-4700

Full-service steel fabrication facility with paint booth; laser and water jet cutting


Contact: Mr. Kevin Schuler, Pres

NAICS Codes: 332119, 332312, 332313, 332812, 332999

(2014)

1983Established:


www.schulermfg.com

Scott Heavy Equipment Inc

6100 Hanson RdMadisonville, KY 42431-6454

270-322-3316

Structural steel fabrications, conveyor structure, land mine clearing blade system, government contracting and manufacturer


Contact: Mr. Dennis Scott, Pres

NAICS Codes: 332999, 336212, 336992

(2014)

1989Established:

www.scottheavyequipment.com

Service Tool & Die Inc

2323 S Green StHenderson, KY 42420-4395

270-827-9582

Tool & die


Contact: Mr. Dwight Fruit, Pres

NAICS Codes: 333514

(2014)

1969Established:

www.servicetool.com

Shoreline Steel South LLC

450 South 16th StreetPaducah, KY 42003

270-444-0088

Roll forming of interlocking steel sheet piling


Contact: Ms. Karri Quandt, Ofc Mgr

NAICS Codes: 331513

(2015)

2013Established:

PO Box 7207Paducah, KY 42002

www.shorelinesteel.com

Simiens Industry Inc

2400 Nelson Miller PkwyLouisville, KY 40223

502-618-8800

Railroad products & signal crossing equipment. Engineer control systems for railways and transit authorities.


Contact: Mr. Kevin Riddett, CEO

NAICS Codes: 332999, 334290, 336510, 541330, 551114

(2015)

1972Established:

www.siemens.com

Siskin Steel & Supply Co Inc

7611 Port RoadLouisville, KY 40258

502-716-5140

Stainless steel, aluminum, carbon steel manufacturing.


Contact: Mr. Tony Adkins, Div Mgr

NAICS Codes: 331110

(2015)

1900Established:

www.siskin.com

12/29/2015 Page 37 of 47

Six Sigma Inc

11901 Capital WayLouisville, KY 40299

502-267-6555

Hydraulic & electronic tooling systems


Contact: Mr. Owen Thompson, Pres

NAICS Codes: 333514, 333996

(2014)

1985Established:

www.sixsigmausa.com

Somerset Tool & Die Corp

289 Northwood DriveSomerset, KY 42503-4518

606-423-3005

Machine shop: tools, dies, jigs & fixtures


Contact: Mr. William L Burge, Pres

NAICS Codes: 333318, 333514

(2015)

1978Established:

Sonoco

Can Div

3100 Ohio DrHenderson, KY 42420-5045

270-827-5637

Aluminum Easy Open end, peelable membrane ends, and steel can ends


Contact: Mr. Henry Mangum, Plant Mgr

NAICS Codes: 331318, 332431

(2014)

1967Established:

www.sonoco.com

Southeast Tube Inc

174 Roger Thomas RdCadiz, KY 42211-9766

270-522-0491

Carbon steel tube fabricating & bending


Contact: Mr. Steve Parrent, Plant Mgr

NAICS Codes: 331210

(2014)

1997Established:

PO Box 1309Cadiz, KY 42211-1309

www.southeasttube.com

Southern Metal Products Co Inc

5516 Poplar Park BlvdLouisville, KY 40228-1073

502-966-3179

Structural steel fabricating and installation. Resaling joist & deck


Contact: Mrs. Jesscia Clark, Pres

NAICS Codes: 332312

(2014)

1977Established:


www.southernmetals.net

Southern Tent & Awning Co

539 E 3rd StLexington, KY 40508-1612

859-255-7772

Fabric and metal awnings, swimming pool covers, tents, tarpaulins, filter bags, industrial curtains, floor and field covers, tennis nets & backdrops; contract sewing.


Contact: Mr. Barry Singer, Pres

NAICS Codes: 238190, 238990, 314910, 326199, 337920

(2014)

1906Established:

PO Box 395Lexington, KY 40588-0395

www.southerntentandawning.net

Spalding & Day Tool & Die Co

13040 Aiken RoadLouisville, KY 40223-4746

502-245-2283

Tools, dies, fixtures, gauges, nuts, brackets, appliance parts and military can tooling prototypes.


Contact: Mr. Daniel L. Day, Pres

NAICS Codes: 333514

(2014)

1948Established:

www.spaldingday.com

12/29/2015 Page 38 of 47

Specialty Manufacturing

3331 Gilmore Industrial BlvdLouisville, KY 40213-2174

502-969-8609

Machine shop: general & CNC machining; custom metal fabricating; arc, gas, MIG & TIG welding; drilling, boring, cutting & honing; lathe & mill work, laser & press brake


Contact: Mr. David Weyler, Pres

NAICS Codes: 332322, 332710, 332999

(2015)

1974Established:

www.smfgky.com

Specialty Wire Reel Inc

602 Gilbert StHopkinsville, KY 42240-1934

270-885-1925

Reels, spools & wire


Contact: Mr. Thomas Watkins Jr., Pres

NAICS Codes: 332618, 332999

(2015)

1991Established:

Speedwell Tool & Die

1020 Speedwell RdRichmond, KY 40475

859-369-3932

Tool & die, custom molded dies


Contact: Mr. James Crawford, Owner

NAICS Codes: 333514

(2015)

1984Established:

Stamler Machine Co Inc

828 S 17th StLouisville, KY 40210

502-585-1820

Machine shop; machine, welding, repairs and fabrication


Contact: Mr. Gerald R Stamler, Pres

NAICS Codes: 332710, 332999, 811310

(2014)

1946Established:

www.stamlermachine.com

Stanley Black & Decker Corp

1251 Harry Long RdShelbyville, KY 40065-9139

502-633-5082

Professional power tool accessories - circular saw blades/reciprocating saw blades/ jig saw blades/ hole saws


Contact: Mr. Craig Zielinski, Plant Mgr

NAICS Codes: 332216

(2013)

1977Established:

www.stanleyblackanddecker.com

Star Manufacturing Inc

1200 Russell Cave RoadLexington, KY 40505-3114

859-252-6741

Furniture mechanisms; metal stampings; jigs & fixtures; production & spot welding; surface, blanchard & production grinding, automotive parts


Contact: Mr. Mark Stanley, Pres

NAICS Codes: 332119, 332510, 332999, 333514

(2015)

1995Established:

www.starmanufacturinginc.com

Steel Structural Products LLC

150 Rochester DrLouisville, KY 40214

502-368-4252

Roll formed steel framing components and light-gauge metal construction material


Contact: Mr. Scott Stuckert, Pres

NAICS Codes: 331221

(2015)

2004Established:

PO Box 9427Louisville, KY 40209

www.steelstructuralproducts.com

12/29/2015 Page 39 of 47

Steel Technologies LLC

196 Shawnee DrEminence, KY 40019-1414

502-845-4202

Steel service center: steel rolling, annealing & slitting/ blanking of steel coils


Contact: Mr. Joe Wright, Genl Mgr

NAICS Codes: 331221, 423510

(2013)

1971Established:

www.steeltechnologies.com

Steel Technologies LLC

3985 US HWY 42 WGhent, KY 41045

859-567-7502

Process flat rolled steel


Contact: Mr. John Hollander, VP

NAICS Codes: 331221

(2014)

1995Established:

www.steeltechnologies.com

Steinkamp Molding LP

Mold and Tool

3436 Turfway RoadErlanger, KY 41018

859-647-1801

Design and production of industrial molds and tools, rubber and plastic injection molds, plastic blow molds, foam molds. Prototypes, parts, jigs, fixtures, robot end-of arm tooling. Precision high-speed CNC machining, EDM. Laser welding.


Contact: Mrs. Brigitte Reinking

NAICS Codes: 332710, 332721, 333511, 333514

(2014)

1999Established:

www.steinkampmold.com

Stephens Pipe & Supply

2225 E Highway 619Russell Springs, KY 42642-7928

270-866-3331

Chain link fence, industrial gates, dog kennels


Contact: Mr. Terry Stephens, Pres/Owner

NAICS Codes: 331222

(2015)

1974Established:

PO Box 618Russell Springs, KY 42642-0618

www.spsfence.com

Sterling Tool & Die Inc

100 Tococo CourtWilmore, KY 40390-9595

859-858-9327

Fabrication and Installation of machines and machine parts


Contact: Mr. Louis Daniels, Owner

NAICS Codes: 332322, 332999, 333514

(2014)

1995Established:

Stewart Iron Works Co

Covington Ironworks LLC

30 Kenton Lands RoadErlanger, KY 41018-1874

859-431-1985

Ornamental iron, guard rail, handrail, fences, posts and gates, gazebos, fountains, flagpoles, and site furniture fabrication and installation. Any custom ornamental iron work.


Contact: Mr. Ted Reilly, COO

NAICS Codes: 332323, 332618, 337127

(2015)

1886Established:

www.stewartironworks.com

12/29/2015 Page 40 of 47

Strong Hold Products


6333 Strawberry LnLouisville, KY 40214-2929

502-363-4175

Steel fabrication: Industrial storage products: heavy duty 12ga steel cabinets, tables, tool & service carts, computer cabinets, personal lockers, etc.



NAICS Codes: 332999, 337211, 337215

(2013)

1993Established:


www.strong-hold.com

Structures Unlimited Inc

4122 Bishop LaneSuite 104Louisville, KY 40218

502-966-6061

Structural steel, mix steel, and railings fabricating and erection


Contact: Mr. Nikki Heady, Pres

NAICS Codes: 332312

(2014)

1995Established:

Structures USA LLC

333 Peterson DriveElizabethtown, KY 42701

270-506-2184

Fabricate steel poles and structures for traffic signs, lights, cell towers, transmission lines, etc.


Contact: Mr. Oscar Hatchett, Genl Mgr

NAICS Codes: 237310, 238120, 332312

(2015)

2013Established:

PO Box 2281Elizabethtown, KY 42702

www.vsisales.com

Stupp Bridge Company

Div Stupp Bros Inc

445 Century StBowling Green, KY 42101-7517

270-393-5000

Plate girder bridge fabrication


Contact: Mr. Reuben Netherland, VP/Genl Mgr

NAICS Codes: 332312

(2014)

1999Established:

www.stuppbridge.com

Summit Fire Apparatus Inc

11 Sperti DrEdgewood, KY 41017-9654

859-331-0360

Custom metal, aluminum & steel fabricating; welding & fire truck bodies. Build firetrucks, general/custom fabrication - job shop.


Contact: Mr. Joseph Messmer, Pres

NAICS Codes: 332312, 336211

(2015)

1957Established:

PO Box 17128Edgewood, KY 41017-0128

www.summitfireapparatus.com

Sunrise Tool & Die Inc

1333 Commonwealth DrHenderson, KY 42420

270-826-9153

Plastic injection molds & repairing


Contact: Mr. Darrell Littrell, Owner

NAICS Codes: 333511

(2014)

1989Established:

www.sunrisetool.net

12/29/2015 Page 41 of 47

Superior Graphite Co

Desulco Div

4059 Calvin DrHopkinsville, KY 42240-5021

270-885-7186

Granular synthetic graphite & desulfurized petroleum coke


Contact: Mr. Steve Hargrove, Plant Mgr

NAICS Codes: 327992, 331110

(2014)

1976Established:

PO Box 535Hopkinsville, KY 42241-0535

www.superiorgraphite.com

Superior Tool & Die

79 Ladonna DrClay City, KY 40312-9648

606-663-5670

Sheet metal fabricating, tools, dies & fixtures


Contact: Mr. Kevin Morton, Owner

NAICS Codes: 332322, 333514

(2014)

1987Established:

Synergy Tool & Gauge LLC

1201 Deatsville RdCoxs Creek, KY 40013-7614

502-331-9819

Aluminum based v-shaped hulls and raised chassis for armor of military vehicles. Machine design and construction.


Contact: Mr. Shawn Bryan, CEO

NAICS Codes: 333514

(2014)

1997Established:

www.synergytool.com

Sypris Technologies Inc

Sub Sypris Solutions Inc

2820 W BroadwayLouisville, KY 40211-1219

502-774-6011

Custom forgings and machining for the automotive, truck, mining, and alternative energy markets.


Contact: Mr. Steve Straub, VP Opers

NAICS Codes: 332111, 332112, 336390

(2014)

1927Established:

www.sypris.com

Tamarlane Industries Inc

846 S Main StBeaver Dam, KY 42320-2131

270-274-4534

Sheltered workshop: wooden door sills, dishwasher parts, pallet repair, furniture hardware, boxes and inserts.


Contact: Mr. Jerry Bevil, Pres

NAICS Codes: 321999, 332999, 624310

(2015)

1983Established:

www.tamarlane.org

Tammcor Industries

100 Venture CourtNicholasville, KY 40356

859-887-4697

Machine shop: general, CNC, prototype & development machining; tooling, prototypes, tool & die; extrusion & progressive dies


Contact: Mr. Keith Tamminga, Pres

NAICS Codes: 332710, 332999, 333514

(2015)

2000Established:

www.tammcor.com

Tarter Gate Company LLC

Plant 1

10892 US 127Dunnville, KY 42528

606-787-7455

Metal farm & livestock products


Contact: Mr. Donald Tarter, Pres

NAICS Codes: 332323

(2014)

1975Established:

PO Box 10Dunnville, KY 42528-0010

www.tartergate.com

12/29/2015 Page 42 of 47

Tarter Tube LLC

12464 US 127Dunnville, KY 42528-6054

606-787-7455

Welded steel tubing; galvanized welded steel tubing; custom steel tube fabricating


Contact: Mr. Donald Tarter, Pres

NAICS Codes: 332996

(2014)

1975Established:

PO Box 10Dunnville, KY 42528-0125

www.tartergate.com

Taubensee Steel & Wire Co

3200 Ohio DrHenderson, KY 42420-5047

270-830-9473

Steel wire, high & low carbon


Contact: Mr. Todd Swanson, Vice Pres

NAICS Codes: 331222

(2014)

1995Established:

taubensee.com

TEBCO of Kentucky Inc

100 Whitehall Shrine RoadRichmond, KY 40475

859-624-0653

Manufacture truck bodies, snowplows, and related equipment and distribution


Contact: Mr. Michael Faulkner, Pres

NAICS Codes: 332312

(2014)

1991Established:

www.tebcoky.com

Tenryu America Inc

3601 Hargrave DrHebron, KY 41048

859-282-8158

Distribution center with product support service work provided.


Contact: Mr. Yoshinori Suzuki, Pres

NAICS Codes: 332216, 493110

(2014)

2002Established:

www.tenryu.com

The Lyons Co

11401 Electron DrLouisville, KY 40299-3857

502-267-0087

Metal fabricating, store fixtures retail product, stainless steel appliances


Contact: Mr. Keith Lyons, Pres

NAICS Codes: 331491, 332322, 332999

(2014)

1952Established:

www.lyons-companies.com

Titan Fabricators Inc

920 Wing AveOwensboro, KY 42303-0417

270-686-7436

Steel fabricated tanks, boiler components, ASME coded vessels, ducts, absorbers.


Contact: Mr. Mike Horn, Pres

NAICS Codes: 332312, 332420

(2014)

1985Established:


www.titanfabricators.com

TMK IPSCO Tubulars Kentucky Inc

100 Steel Plant RoadWilder, KY 41071

859-292-6000

Manufacture steel pipes for oil and gas industry


Contact: Mr. Mark Wolber, Plant Mgr

NAICS Codes: 331110, 331210

(2014)

1981Established:

PO Box 721670Newport, KY 41072-1670

www.tmk-group.com

12/29/2015 Page 43 of 47

Toolco Inc

615 Bark CoveOwensboro, KY 42303-0606

270-684-1084

Tools, dies, jigs, fixtures & industrial molds


Contact: Mr. Robert Evans, Pres

NAICS Codes: 333514

(2015)

1980Established:


www.toolco-inc.com

Toyota Tsusho America Inc

700 Triport RdGeorgetown, KY 40324-8974

502-868-3450

Headquarters, metals service center; steel slitting; blanking; warehousing; distribution, logistics


Contact: Mr. Mike Lavender, Sr VP

NAICS Codes: 332312, 423510, 541614, 551114

(2015)

1986Established:

www.taiamerica.com

Tri County Steel Inc

3501 Mattingly RdBuckner, KY 40010-8801

502-222-2201

Sheet, structural, ornamental, miscellaneous steel fabricating


Contact: Ms. Brenda Moyer, Pres

NAICS Codes: 332312, 332322, 332323

(2015)

1990Established:

P.O. Box 307Buckner, KY 40010-8801

Tri-Star Metals Inc

1415 East Parrish AvenueOwensboro, KY 42303

270-281-4500

Steel bar distributor: alloy, carbon, stainless, tool steel and high speed steel bars. Manufacture band saw guides. General machine shop.


Contact: Mr. Edward Belfiglio, Pres

NAICS Codes: 332710, 423510

(2015)

1986Established:

www.tri-starmetalsinc.com

Trophy Awards Manufacturing Inc

1023 Town DriveWilder, KY 41076

859-442-7500

Awards, crystal awards, acrylic awards, trophies, plaques, corporate awards, gifts, promotional items, imprinted apparel, signage & nametags


Contact: Mr. Tom Busch, Pres

NAICS Codes: 332999

(2014)

1985Established:

www.trophyawards.com

Tungco

3955 Anton RoadMadisonville, KY 42431

270-825-0000

Tungsten reclamation, mining bits, headquarters


Contact: Mr. Steve Nance, CEO

NAICS Codes: 423510, 551114

(2014)

2001Established:

www.tungco.com

United Supply Services Inc

USS Inc

2100 Pennebaker AveBardstown, KY 40004

502-349-7144

Fabricated structural metal products


Contact: Mr. Wilman E. Davis Jr., Pres/Owner

NAICS Codes: 332312, 332999

(2015)

2010Established:

www.uss-usa.com

US Chita

200 Hilpp DriveLebanon, KY 40033

270-692-0469

Coil springs for ATV's and motorcycles, valves for shock absorbers, snowmobile runners


Contact: Mr. Eiji Minekawa, Pres

NAICS Codes: 332119, 332999

(2015)

2003Established:

12/29/2015 Page 44 of 47

Utility Metals


6210-R Strawberry LaneLouisville, KY 40214-2929

502-363-6681

Steel & alum fabricating: outdoor lighting products - poles/mast arms/brackets/etc.



NAICS Codes: 332312, 332323, 332999

(2014)

1988Established:


www.utilitymetals.com

Vegan Metal Fabricators Co

2045 State Route 339 ESedalia, KY 42079-9604

270-328-8980

Shelving racks; metal racks, dollies & material handling products


Contact: Mr. Vegan Fakhoorian, Pres/Owner

NAICS Codes: 238390, 331110, 332510, 333924, 423440

(2014)

1985Established:

www.veganmetal.com

Vendome Copper & Brass Works Inc

729 Franklin StLouisville, KY 40202-6007

502-587-1930

Distillation & brewery equipment, ASME pressure vessels, condensers & tanks, distillation columns & internal components, custom fabricated process equipment, heat exchangers, field installation and repairs.


Contact: Mr. Thomas E Sherman, Vice Pres

NAICS Codes: 332313, 332999, 333241, 333249

(2014)

1903Established:

www.vendomecopper.com

Vermont Thread Gage LLC

564 Reasonover DrFranklin, KY 42134

270-586-8107

Manufacturers threaded gage products for industries such as aerospace, automotive, electrical, fastener, and medical tooling


Contact: Mr. John Gehret III, Mgr

NAICS Codes: 332216

(2014)

2000Established:

www.vermontgage.com

Vetco Inc

750 Paintlick RdBerea, KY 40403

859-986-8500

Custom designed and built metal buildings


Contact: Mr. Owen Barnes, Owner

NAICS Codes: 332312

(2015)

1983Established:

PO Box 216Berea, KY 40403

www.vetcoinc.com

Vuteq Engineering Corp

Sub Vuteq Corporation

100 Carley DriveGeorgetown, KY 40324-9363

502-863-6377

Automotive stamping dies, automated assembly line equipment, checking fixture gauges, and metal stamping


Contact: Mr. Hisao Nagahiro, Pres

NAICS Codes: 333514

(2014)

1988Established:

www.vuteqeng.com

W J Baker Co

120 South StreetWilder, KY 41071-2937

859-261-8482

Metal stampings and tubular spacers


Contact: Mr. John Hengelbrok, VP/Genl Mgr

NAICS Codes: 332999

(2014)

1899Established:

www.bakerstamping.com

12/29/2015 Page 45 of 47

Waldemar Design & Machine LLC

1797 Matherly RoadLiberty, KY 42539-9301

606-787-8474

Plate, angle, and roll bending machines


Contact: Mr. Ammon Weaver, Pres

NAICS Codes: 332999

(2015)

1980Established:

Wayne Floyd Gate Co Inc

6401 South US 127Liberty, KY 42539

606-787-6343

Steel farm gates

Full-time Employment:

Contact: Mr. Wayne Floyd, Pres

NAICS Codes: 332323

(2014)

1984Established:

www.floydgate.com

Werner Co

Louisville Plant

11225 Bluegrass PkwyLouisville, KY 40299-2319

502-267-5577

Industrial aluminum, fiberglass, climbing scaffolding, wood attic ladders, fall protection


Contact: Mr. David Plotner, Plant Mgr

NAICS Codes: 321999, 326199, 332999

(2014)

1976Established:

www.wernerladder.com

West KY Steel Construction

701 Gulf StProvidence, KY 42450-1170

270-667-2913

Steel fabricating for coal mining industry


Contact: Mr. James E. Gooch, Pres

NAICS Codes: 332312, 332313, 332323

(2014)

1958Established:

PO Box 68Providence, KY 42450-0068

www.kentuckysteel.org

Whip-Mix Corp

361 Farmington AveLouisville, KY 40209-1833

502-637-1451

Headquarters; Dental equipment & supplies, casting investment, jewelry casting, vacuum mixing laboratory equipment & gypsum powders. Milled zirconia dental restorations. Contract jobs.


Contact: Mr. Allen F. Steinbock, CEO

NAICS Codes: 331512, 339114, 339116, 551114

(2014)

1919Established:


www.whipmix.com

Whitworth Tool Inc

114 Industrial Park LnHardinsburg, KY 40143

270-756-0098

Components for aerospace, defense, automotive, pharmecutical, energy, and railway. Replacement parts for the tool & die industry, cmm data collection, engineering services.


Contact: Mr. Kenny Whitworth, Pres

NAICS Codes: 332710, 332721, 333514

(2014)

1998Established:

P.O.Box 759Hardinsburg, KY 40143

www.whittool.com

Wise Industry LLC

170 Industry RdGeorgetown, KY 40324-9547

502-868-9493

Metal die blocks & special machinery tools, box spring tables (Sealy Corp.), electrical box handles (Square D), automotive stampings (Johnson Control), metal fabricating (TMMK)


Contact: Mr. Billy Wise, Owner

NAICS Codes: 332119, 333514, 333517

(2015)

1987Established:

12/29/2015 Page 46 of 47

World Tower Co

1213 Compressor DrCampusMayfield, KY 42066

270-247-3642

Radio, TV, microwave & cellular communication towers


Contact: Mr. Doug Walker, Pres

NAICS Codes: 332312, 334220

(2015)

1957Established:

PO Box 508Mayfield, KY 42066-0031

www.worldtower.com

Worldwide Technologies LLC

145 Reasonover DriveFranklin, KY 42134

270-598-7100

2d and 3d die sets and die forms to primarily service automotive market; production machining, heavy trucks, fence and railroad


Contact: Mr. Michael Jones

NAICS Codes: 333514

(2014)

2006Established:

P.O. Box 1487Franklin, KY 42135

www.wwt-bg.com

12/29/2015 Page 47 of 47

Date post:	19-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Report Kentucky Facilities(2015) Established: 2005 PO Box 25 Henderson, KY 45419-0025 Alro Steel...

Documents