Phone: 519-595-4212 Toll Free: 1-866-595-5015 6980 Main St. Millbank
SEPTEMBER
OPENHOUSE
2 DAY WOODWORKING AND TOOL EVENT SEPT 24-25, 2015 9AM−8PM
OVER 35 VENDOR DISPLAYS!
20% OFF
BBQ, COFFEE & DONUTS, DEMONSTRATIONS & NEW PRODUCTS ON DISPLAY!
CAN’T MAKE IT THE 24TH OR 25TH? CALL US WITH YOUR ORDER BEFORE THE 24TH − 519-595-4212
50%OFF
ALL DEWALT ACCESSORIES
50%OFF
30% OFF ALL DEWALT
TOOLS
PURCHASE A DEWALT TOOLENTERTO WINA DEWALT TOOLBOX & TOOLS$2000 VALUE!
MILWAUKEE ACCESSORIES
ALL OPEN STOCK
MILWAUKEE TOOL
TRADE-INEVENT
MAKITA FREE BATTERY EVENT
30%OFFALL DEWALT TOOLS
TRADE IN YOUR OLD TOOLS!TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
$299REG: $429
$439REG: $629
$229REG: $329
$251REG: $359
$230REG: $329
$244REG: $349
20V Max Grinder Tool Kit (5.0 Ah)
20V Premium 3-Speed Hammerdrill Kit (4.0Ah)
20V XR Brushless Premium Hammerdrill & Impact Driver Combo Kit (4.0Ah)
20V MAX SDS 3 Mode Rotary Hammer Drill Kit
20V MAX 1/2” Impact Wrench Kit
20V MAX Brushless Drywall Screwgun & Cut-Out Tool Combo Kit(2.0 Ah)
20V MAX XR Brushless Drywall Screwgun Kit (2.0 Ah)
20V MAX Premium 5-Tool Combo Kit (3.0Ah)
20V MAX 7 1/4” Sliding Miter Saw Kit (w/Battery & Charger)1- 4.0 AH Battery
$489REG: $699
30% OFFREG: $499
$229REG: $329
20V Brushless 3-Speed 1/4” Impact Driver Kit (4.0Ah)
$188REG: $269
20V MAX XR Brushless High Torque 1/2” Impact Wrench Kit- w/indent and 2-5.0 Ah batteries
$384REG: $549
NEW
Free 5.0 Ah Battery with select Dewalt kits. Visit the Dewalt booth for details*while supplies last
30%OFFALL DEWALT TOOLS
TRADE IN YOUR OLD TOOLS!TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
12V TOOLS
$159 REG: $229$125 REG: $179
$439REG: $629
$223REG: $319
$199REG: $289
20V MAX* XR Li-Ion Brushless 1/4” Impact Driver Kit (2.0Ah)
20V MAX Grease Gun Kit- 4.0 Ah
12V Hand Held Wall Scanner Kit
20V MAX Compact 2 PC Kit (1.5 Ah)
20V MAX XR Brushless Framing Nailer Kit- 4.0 Ah- Dual Speed Model
20V XR Lithium Ion Brushless Compact Hammerdrill Kit (2.0Ah)
12V Drill/Driver Kit 12V Drill/Impact Combo Kit
$199REG: $289
20V MAX XR Li-Ion Brushless Compact Hammerdrill & Impact Driver Kit (2.0Ah)
20V MAX 1/2” High Torque Impact Wrench Kit (4.0 Ah)
20V MAX XR Oscillating Multi-Tool Kit (2.0 Ah)
$279REG: $399
$181REG: $259
$349REG: $499
BONUSFREE
HAMMER & TRI-SQUARE
Free 5.0 Ah Battery with select Dewalt kits. Visit the Dewalt booth for details*while supplies last
30% OFFREG: $389
30% OFFREG: $259
30%OFFALL DEWALT TOOLS
18V XRP Hammerdrill Kit 18V 1/4” XRP Impact Driver Kit 18V XRP Hammerdrill / Impact Driver / Recip Saw Kit
1/2” VSR Stud & Joist Drill- with Clutch and Bind-Up Control®
$489 REG: $699 $272REG: $38918 V XRP 6-Tool Combo Kit
18V 18 Ga. Straight Cordless Nailer Kit
$83REG: $119
18 Gauge 2” Brad Nailer Kit
$83REG: $119
18 Gauge 1-1/2” x 1/4” Narrow Crown Stapler Kit
Coil Roofing Nailer
$97REG: $139
18 Gauge Precision Point Brad Nailer
18V Cordless XRP 16 Gauge Straight Finish Nailer Kit
1 3/4 HP Router- Fixed base
1/2” VSR Pistol Grip Hammerdrill
$314REG: $449
$139REG: $199
$153REG: $219
TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
1-1/4 HP Max Torque Variable Speed Compact Router- with LED’s
$132REG: $189
$209 REG: $299 $181 REG: $259 $335 REG: $479 $328 REG: $469
30%OFFALL DEWALT TOOLS
5” Random Orbit Sander
$181REG: $259
$69REG: $99
2 in 1 Flooring Tool
$181REG: $259
Coil Roofing Nailer
1/2” Spade Handle Drill
4 1/2” Grinder- 11,000rpm 10A
5” / 6” Grinder- Rat Tail 10,000rpm 13A
7” Medium Angle Grinder
Corded Reciprocating Saw- 12.0 Amp
14” Chop Saw- 3,800 rpm, 15A
7 1/4” Lightweight Circular Saw
7 1/4” Lightweight Circular Saw- electric brake
$132REG: $189
$87REG: $125
$111REG: $159
$118REG: $169
$159REG: $229
$89REG: $129
$125REG: $179
TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
1-1/2” Die Grinder
$153REG: $219
Metal Connector Nailer
$209REG: $299
Coil Siding & Fencing Nailer- 1-1/4” - 2-1/2”
$279REG: $399
Coil Roofing Nailer
$209REG: $299
$69REG: $99
30%OFFALL DEWALT TOOLS
TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
20V MAX Reciprocating Saw- bare tool
20V MAX XR Brushless 2 Speed Nailer- bare tool
20V MAX 1/4” Brushless 3-Speed Impact Driver- bare tool
20V MAX XR Brushless High Torque 1/2” Impact Wrench - Detent Pin Anvil- bare tool
$125REG: $179
$111REG: $159
20V Premium Brushless 3-Speed Hammerdrill- bare tool
20V 6-1/2” Circular Saw- bare tool
20V XR Brushless 1/4” Impact Driver- bare tool
20V 1/2” Impact Wrench- bare tool
$118REG: $169
$132REG: $189
20V Jig Saw- bare tool
$76REG: $109
20V Battery Pack (4.0 Ah)
$89REG: $129
20V Battery Pack (5.0 Ah) 20V 4 ½” Cut-Off Tool- bare tool
20V SDS 3 Mode Rotary Hammer- bare tool
20V MAX 1/4” Brushless 3-Speed Impact Driver- bare tool
20V MAX 7 1/4” Sliding Miter Saw- bare tool
20V MAX XR Brushless Drywall Screwgun- bare tool
$125REG: $179
$118REG: $169
$89REG: $119
$104REG: $149
20V 3/8” Right Angle Drill- bare tool
20V Drywall Cutout Tool- bare tool
18/20V MAX Cordless Wet-Dry Vacuum- bare tool
20V XR Oscillating Multi-Tool- bare tool
$83REG: $119
$111REG: $159
$244REG: $349
$111REG: $159
$111REG: $159
$377REG: $539
$132REG: $189
$209REG: $299
$111REG: $159
30% OFFREG: $419
30%OFFALL DEWALT TOOLS
TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
20V 6-1/2” Circular Saw- bare tool
18V 7/8” SDS Hammer- bare tool
18V Cut-Off Tool- bare tool
18V XRP Battery Combo Pack
Heavy Duty Heat Gun
$97REG: $139
$97REG: $139
18V Jig Saw- bare tool
18V Recip Saw- bare tool
18V Circular Saw- bare tool
18V 18 Guage Brad Nailer- bare tool
18V 1/2” Impact Wrench- bare tool
18V Cordless Grease Gun- bare tool
Electric Jig Saw
18V Impact Driver- bare tool
18V 1/2” XRP Hammerdrill- bare tool
18V 1/2” High Torque Impact Wrench- bare tool
$104REG: $149
$90REG: $129
$111REG: $159
$132REG: $189
$209REG: $299
$111REG: $159
$153REG: $219
$181REG: $259
Heavy Duty Miter Saw Stand
Rolling Miter Saw Stand
20V MAX LED Work Light
$45REG: $64.99
20V MAX Jobsite LED Spotlight
$83REG: $119
20V Max LED Hand Held Area Light
$45REG: $64.99
18V / 20V MAX Cordless / Corded LED Worklight
$90REG: $129
18V / 20V MAX Cordless LED Worklight
$76REG: $109
$244REG: $349
$97REG: $139
30% OFFREG: $149
$62REG: $89
$132REG: $189
$139REG: $199
DEWALT LIGHTING
M12 FUEL 1/4” Impact Driver Kit
M12 FUEL 1/2” Hammer Drill/Driver Kit
M12 FUEL 2-Tool Combo Kit
$289REG: $339
$199REG: $249
$169REG: $219
M18 FUEL Brushless 6-Tool Combo Kit- 4.0 Ah
M18 FUEL Brushless 2-Tool Combo Kit- 4.0 Ah
M18 FUEL Brushless 1/4” Hex Impact Driver Kit- 4.0 Ah
M18 FUEL Brushless 1/2” Hammer Drill/Driver Kit- 4.0 Ah
$1049REG: $1149
M18 FUEL 6-1/2” Circular Saw
M18 FUEL SAWZALL Reciprocating Saw
M18 FUEL 1-1/8” SDS Plus Rotary Hammer
M18 FUEL 1/2” Impact Wrench with Pin Detent- 210 ft lb torque
$279REG: $379
M18 FUEL 7-1/4” Circular Saw
$279
M18 FUEL Deep Cut Band Saw- 5” x 5” capacity
$379
$399
M18 FUEL HOLE HAWG 1/2” Right Angle Drill
$319
$269REG: $369
M18 FUEL Brushless 1/2” High Torque Impact Wrench with Friction Ring Kit- 700 ft lbs torque in FWD. 1100 ft lbs in reverse.- 4.0 Ah
M18 FUEL 1-1/2” Magnetic Drill Kit- 4.0 Ah
$429REG: $529
$2399REG: $2499
$299REG: $449
$150 OFF* PLUS FREE
5.0 Ah BATTERY!
+
$100 OFF* PLUS FREE
5.0 Ah BATTERY!
+
$199
$239
$239
* TRADE-IN YOUR OLD TOOL TO GET PRINTED SALE PRICE
* GET $50 OFF ANY M12 FUEL KIT WITH TRADE-IN
$100 OFF* PLUS FREE
5.0 Ah BATTERY!
+
$100 OFF* PLUS FREE
5.0 Ah BATTERY!
+
$100 OFF* PLUS FREE
5.0 Ah BATTERY!
+
$100 OFF* PLUS FREE
5.0 Ah BATTERY!
+
$100 TRADE-IN* DISCOUNT + FREE BATTERY
$50 TRADE-IN* DISCOUNT + FREE BATTERY
M18 FUEL 4-1/2” / 5” Grinder Slide Switch Lock-On
$239
BUY ANY 2—M18 FUEL
BARE TOOLS
AND GET A FREE 5.0 AH
BATTERY & CHARGER KIT
$50 OFF* PLUS FREE
4.0 Ah BATTERY!
+ $50 OFF* PLUS FREE
4.0 Ah BATTERY!
+ $50 OFF* PLUS FREE
4.0 Ah BATTERY!
+
OPEN STOCK ACCESSORIES 50%
OFF ALL HAND TOOLS
$199REG: $269 $12
REG: $16.79
$199REG: $259
$29.99REG: $39.99
TiBone 15 OZ Titanium Smooth or Milled-Face Hammer 7” Rafter Square/9”
Torpedo Level Combo
Tibone Mini-14 Oz. Smooth Face With Curved 16” Ti Hdl.
12-in Stainless Steel Clawbar
10” Torque Lock Curved Jaw Locking Pliers
ProPEX/Tubing Cutter
FASTBACK Flip Utility Knife
Gray Hoodie Kit- includes 12V battery & charger
$179REG: $199
Black Hoodie Kit- includes 12V battery & charger
Heated Jacket Kit- includes 12V battery & charger
$229REG: $249
$179REG: $199
$10.74REG: $13.99
$22.49REG: $29.99
$9.74REG: $12.99
M18 Cordless 2-Speed Grease Gun Tool Only
M18 XC 4.0 XC Battery Pack
M18™ Compact Drill / Driver Kit
M18 Cordless Wet/Dry Vac Tool Only
$149REG: $179
$115REG: $129
$179REG: $199
15.0 Amp Super Sawzall® Recip Saw
28 PC All Purpose Professional Hole DozerHole Saw Kit
40PC Shockwave Drill & Drive Set
12 PC Sawzall Blade Set
$24.99REG: $34.99
$24.99REG: $29.99
$199REG: $279
BUY ONE GET ONE
FREE!
FREE 12V
PRODUCT!
+ FREE 12V
PRODUCT!
+ FREE 12V
PRODUCT!
+
25% OFF
$119
$229REG: $259
20%OFF20%20%
MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!
18V X2 25-1/2” Cordless Hedge Trimmer- bare tool
18V X2 12” Cordless Chainsaw- bare tool
18V X2 36 Volt Cordless Line Trimmer- bare tool
18V 6-1/2” Circular Saw
18V 15/16” Rotary Hammer
18V 5” Angle Grinder
18V 1/4” Impact Driver
18V 1/2” Hammer Driver Drill
18V 1/2” Impact Wrench
18V Jig Saw
18V 1/4” Drywall Screwdriver
18V 1/4” Impact Driver
ALL OTHER MAKITA TOOLS
+
18V BRUSHLESS BARE TOOLS
BONUS! BATTERIES
& CHARGER
BONUS! BATTERIES
& CHARGER
Outdoor Power Equipment
BUY $500* AND GET YOUR CHOICE OF A
FREE 3.0 AH BATTERY OR BIT SET
$175REG: $219
$255REG: $319
$159REG: $199
$159REG: $199
$175REG: $219
$167REG: $209
$199REG: $249
$175REG: $219
$111REG: $139
FREE BATTERY+FREE
BATTERY+ FREE BATTERY+
$349REG: $399
$749REG: $799
$599REG: $649
18V LXT 3.0AH Hammerdrill/Impact Driver Combo Kit
18V LXT 6pc Cordless Combo Kit4.0 AH
18V LXT 4pc Cordless Combo Kit 4.0 AH
INCLUDES A FREE FLASH-LIGHT
*in makita tools
$379REG: $419
3 HP Air Compressor- 6.5 cfm @ 90 psi
5” Random Orbit Sander
3-1/4” Planer14” Portable Cut-Off Saw
5” Angle Grinder
$359REG: $449
$79REG: $99
$159REG: $199
$151REG: $189
20% OFFREG: $159
$269REG: $339
$379REG: $399
20%OFF20%20%
MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!
14” Power Cutter
24.5cc Line Trimmer
2 Stroke TrimmerStraight Shaft
*These cordless kits and outdoor tools are excluded from the 20% off and free goods promo below.
18V Drywall Cutout Tool
18V 7-1/4” Circular Saw
18V 3-1/4” Planer
18V 3.0 Ah Li-Ion Battery
18V 5” Random Orbit Sander
18V 4.0 Ah Li-Ion Battery
18V 5.0 Ah Li-Ion Battery
18V Line Trimmer
7 1/4” Circular Saw 7 1/4” Circular Saw- with electric brake
1” SDS Rotary Hammer
1/4” Trimmer3” X 24” Belt Sander
$223REG: $279
$111REG: $139
$151REG: $189
$191REG: $239
$95REG: $119
ALL OTHER MAKITA TOOLS
+
18V BARE TOOLS
4STROKE ENGINE
$100OFF $299
REG: $399
$239REG: $299
$899REG: $999
BUY $500* AND GET YOUR CHOICE OF A
FREE 3.0 AH BATTERY OR BIT SET
$111REG: $139
$199REG: $249
20% OFFREG: $99
20% OFFREG: $129
20% OFFREG: $149
$127REG: $159
$103REG: $129
$199REG: $249
$119REG: $149
18V 300 mL Caulking Gun
FREE BATTERY+FREE
BATTERY+
$399REG: $499
$379REG: $449
$499REG: $579
18V LXT 4.0AH Hammerdrill & Brushless Impact Driver
18V LXT 3.0AH Compact Brushless Hammerdrill & Brushless Impact Driver Kit
18V LXT Brushless Cordless Hammer Drill & Impact Kit 4.0 AH
FREE BATTERY+
1” SDS-plus BULLDOG Xtreme Rotary Hammer
$229REG: $259
10” Worksite Table Saw With Gravity Rise Wheeled Stand
12” Dual-Bevel Glide Mitre Saw
13 PC DareDevil Spade Bit Set- 1/4” - 1-1/2”
$599REG: $649
$649REG: $749
1-1/8” SDS-plus Rotary Hammer
$349REG: $449
Gravity-Rise Wheeled Miter Saw Stand
$249REG: $299
7 1/4” Circular Saw w/ Diablo Blade
$119REG: $139
“The Colt” Palm Router- 1 HP
$109REG: $139
3000PSI Gas Powered Pressure Washer- 196cc Honda Engine- Includes 25’ hose
4000PSI Gas Powered Pressure Washer- 389cc Honda OHV- 3.4 GPM
3500PSI Hot Water Gas Powered Pressure Washer- 389cc Honda Engine- No 1 or No 2 diesel or kerosene fired burner
$849REG: $899
$1379REG: $1449
$4299REG: $4499
$479REG: $499 $339
REG: $369Li-ion CF325LI Cordless Framing Nailer 2”-3 1/4”- Lithium battery
Powermaster Plus Framing Nailer- 2” to 3 1/2”
1/2” Crown Construction Stapler
2” 18G Finish Brad Nailer
Coil Roofing Nailer
3 1/2” Framing Nailer
$99REG: $119
$369REG: $399
$259REG: $319
$319REG: $349
FREE2ND
BATTERY
$19.99REG: $29.99
FREE HAMMER TACKER
Self-Leveling Interior/Exterior Laser Kit• Projects 3 - 360° lines• Includes receiver and rechargeable lithium battery and charger
• 200’ operating radius
$599REG: $699
Self Leveling Laser Level Kit• Includes tripod, grade rod, and receiver
• Single axis manual slope mode• 1300’ operating diameter
$999REG: $1079
Automatic Dual Grade Laser with CR600 Combo Receiver• Single & dual dial-in grade
• With rechargable battery + charger
• CR600 receiver machine or rod-mounted
The Go-To Ceiling Laser• Green horizontal line•Includes a Lithium Battery•2 vertical red lines, 90° apart
$749REG: $799
SELF-LEVELLING LINE LASER (HORIZONTAL AND VERTICAL)
3 BEAM SELF-LEVELLING LINE LASER
30%OFF
SELF-LEVELING ROTARY LASER- Horizontal/Vertical with Tripod 9.6 V - 18V
SELF-LEVELING ROTARY LASER KIT- Kit & Laser Detector
$839 REG: $1199$384 REG: $549
$265REG: $379
30% OFFREG: $169
$499REG: $549
Combination Laser Receiver•Includes rod clamp and magnetic machine mount
• Rugged, waterproof, lightweight•Colored LED elevation indicators—up to 100m in bright sunlight
• Wraparound receiver cells with continuous pickup through 270°
• 5 on-grade sensitivities• Use with any rotating laser
DIAL-IN GRADE SELF-LEVEL-ING ROTARY LASER COM-PLETE KIT- Includes laser, receiver/remote, tripod and grade rod
Self Leveling Laser Level Kit• Includes tripod, grade rod, and receiver
• Single axis manual slope mode
• 2600’ operating diameter
• Rugged design, IP66 dust and waterproof
$1499REG: $1599
50 FT. LASER DISTANCE MEASURER
$59REG: $69.95
$1399REG: $1499
$2499 REG: $2699
Automatic Dual Grade Laser with CR600 Combo Receiver• Single and dual dial-in grade• With rechargable battery + charger
• CR600 receiver
$2999 REG: $3199
INCLUDES FREE
DISTANCE MEASURER
ALL FLAP WHEELS
Available in 40, 60, 80 or 120 Grit
ALL HP GRINDING WHEELS
ALL ROCK CARBIDE™ SDS+ BIT
ALL BULK PACK - 25 SDS+ BITS
2-3/4”-3-1/4”-4”-5”-6”-
$249 $125 $259 $129 $279 $139 $339 $169 $459 $229
ALL 22” SDS MAX CORE BITS
REG SALE5/323/161/45/163/81/2
7-1/4” 24T CARBIDE THIN KERF FRAMING BLADE
10” 40T GENERAL PURPOSE SAW BLADE
REG$49
REG$49.99
REG$17.99
REG$9.99
29 PC PILOT POINT SET
$54
• 25% Faster• 70% Longer Life• 1/16 - 1/2”
REG $109
$24.50 $24.99$8.99 $4.99
$5.99 $2.99 $5.99 $2.99 $4.99 $2.49 $6.99 $3.49 $6.99 $3.49 $8.99 $4.49
REG SALE5/8” x 16”3/4” x 16”1” x 16”1 1/8” x 10”1 1/4” x 10”1 1/2” x 18”2” x 18”
$36.99 $18.49 $45.99 $22.99 $55.99 $27.99 $59.99 $29.99 $72.99 $36.49 $119.00 $59.50 $169.00 $84.50
ALL SDS MAX DRILL BITS
REG SALE
12” 80T FINE FINISH SAW BLADE
5/323/161/45/163/81/2
$135 $67.50 $135 $67.50 $113 $56.50 $157 $78.50 $159 $78.50 $199 $99.50
REG SALE
ALL RECIPROCATINGSAW BLADES
6-1/2” 18T CIRCULAR SAW BLADE
ALL XP 1/4” GRINDING WHEELS ALL HP .045 CUTTING WHEELS ALL XP .045 CUTTING WHEELS REG SALE4 1/2” XP $4.49 $2.245” XP $4.99 $2.486” XP $5.99 $2.997” XP $9.99 $4.99
REG SALE4 1/2” $7.99 $3.995” $8.99 $4.497” $16.99 $8.49
REG SALE4 1/2” HP $1.99 $0.995” HP $2.29 $1.147” HP $3.49 $1.74
REG SALE4 1/2” XP $2.29 $1.145” XP $2.49 $1.246” XP $2.69 $1.347” XP $3.69 $1.84
REG SALE4 1/2” HP $3.69 $1.845” HP $3.99 $1.996” HP $4.69 $2.347” HP $5.99 $2.99
ALL METAL CHOP SAW WHEELS REG SALE12” x 1/8” x 1” $5.49 $2.7412” x 1/8” x 20mm $5.49 $2.7414” x 7/64” x 1” $7.99 $3.9914” x 1/8” x 20mm $9.99 $4.99
10-PIECE BI-METAL RECIPROCATING SAW BLADE SET WITH CASE
REG$28.99$14.49 REG
$34.99$17.49
40-PC IMPACT READY SCREWDRIVING KIT
• Quick Change Mandrel
HOLE SAW KITS REG SALE9PC ELECTRICIANS SET $89.99 $44.999PC PLUMBERS SET $89.99 $44.9913PC MASTERS SET $159.00 $79.50
50% OFF ALL DEWALT ACCESSORIES
AND OSCILLATINGSAW BLADES
https://www.kijiji.ca/h-guelph/1700242
50%OFF
14oz MIG Weld Framing Hammer
ToughSystem Drawer UnitXL Case ToughSystemLarge Case ToughSystem
25’ x 1-1/4” FatMax® Tape Rule Twin Pack
1/2” Drive Impact Wrench - Heavy Duty
Stanley 16’ and 25’ Tape Measure Pack
TSTAK® II - Flat Top TSTAK® I - Long Handle TSTAK® Trolley
FatMax® 30’ Tape Rule
FatMax® 48” Non-Magnetic Level
Premium Quick Square® Layout Tool
14oz FaxMax® Xtreme Weld Technology MIG Hammer
40” 8 Drawer Roller Cabinet
40” 5 Drawer Top Chest Metal Storage
Complete Set Price
Small Case ToughSystem
Tough System DS Carrier w/ Boxes
REG$59.99
REG$59.99
REG$10.99
REG$36.99$29.59
REG$169$135REG
$29.99$23.99
REG$32.99$26.39 REG
$33.99$27.19
REG$19.99$15.99
$47.99$47.99
REG$69.99$55.99 REG
$79.99$63.99
$8.79
REG$49.99
REG$629
REG$649
REG$1278
$39.99 $499
$519
$1018
REG SALE24” $26.99 $19.9948” $36.99 $29.5972” $65.99 $52.79
20% OFF ALL DEWALT & STANLEY HAND TOOLS
REG$399$319
FatMax® 28” Structural Foam Water Resistant Toolbox
30m/100’ FatMax® Chalk Line Reel and Chalk Set
REG$48.99
REG$12.99
$39.19
$10.49
Deep Pro Organizer
Jobsite LED Headlamp
REG$29.99
REG$24.99
$23.99
$18.74
REG$49.99$39.99
12” Premium Rafter Square
REG$19.99$15.99
TOUGH SYSTEM
TSTAK SYSTEM
REG$139$111
FREE GRAY TOOL EVENTFREE GRAY TOOL EVENT
42” 12-DRAWER ROLLER CABINET
2-3 JAW PULLER- 8 ton
22 PIECES SAE & METRIC LONG ARM HEX KEY SET
28” 7-DRAWER ROLLER CABINET
42” 8-DRAWER TOP CHEST
ALUMINUM PIPE WRENCHES14” $74.99 36” $299.9918” $93.99 48” $464.9924” $145.99
OF GRAY/DYNAMIC PRODUCT & RECEIVE
BUY $750
OR
$299 VALUEFREE
3/4” DRIVE 21PC 12 PT STD SAE SOCKET SET
OR
OF GRAY/DYNAMIC PRODUCT & RECEIVE
BUY $250
$79 VALUEFREE
36 PC SCREWDRIVER SET
OR
OF GRAY/DYNAMIC PRODUCT & RECEIVE
BUY $500
$169 VALUEFREE
3 TON, SINGLE OPERATOR PULLER - 2/3 JAW DESIGN
16PC SAE CONTRACTOR SERIES COMBINATION WRENCH SET
1/2” DRIVE 22-PIECE 6PT STD. SOCKET SET
$247$139$309
$26.99
$1699$549
$549$899
52” INDUSTRIAL WORKBENCH
FREE GRAY TOOL EVENTFREE GRAY TOOL EVENT
COMPARTMENT RACK W/4 COMPARTMENT BOXES
1/2” DRIVE 13 PC SAE IMPACT SOCKET SET- 1/2” - 1-1/4” Sockets
TORQUE WRENCH3/8” $1841/2” $255
9PC SCREWDRIVER SET
OF GRAY/DYNAMIC PRODUCT & RECEIVE
BUY $750
OR
$299 VALUEFREE
27” 8 DRAWER TOP CHEST
OR
OF GRAY/DYNAMIC PRODUCT & RECEIVE
BUY $250
$79 VALUEFREE
7 PC PLIER SET
OR
OF GRAY/DYNAMIC PRODUCT & RECEIVE
BUY $500
$169 VALUEFREE
3 TON, SINGLE OPERATOR PULLER - 2/3 JAW DESIGN5” DUCTILE IRON MECHANICS VISE
$161 $78.99
3PC PRY BAR SET
$99
54” MARQUIS 8-DRAWER TOP BOX
$2375
54” MARQUIS 13-DRAWER ROLLING CABINET TOOL BOX $3599
$399
ADVANCED DYNAMIC MASTER SET BUNDLE- 367 Piece Advance Master Set
- 42” Roller Cabinet- FREE foam organizers for all tools
$2949
40V MAX XR Brushless 15” String Trimmer Kit(4.0 Ah)
REG$329
$22930% OFF
STORAGE CHEST BOX30” x 48” $699 $499
** while quantities last
18” NAIL EATERS Sale Reg1/2” $28.99 $35.995/8” $31.49 $38.993/4” $35.99 $43.997/8” $39.49 $48.991” $44.99 $55.991 1/8” $55.99 $69.991 1/4” $64.99 $80.99
NAIL EATER BITS
20% OFF
CLAMPMETER AC/DC
STAINLESS STEEL WIRE STRIPPER
Reg. $280.99
$239
Reg. $26.99
$19.99
20V/12V MAX Black Heated Hoodie(Hoodie and Adaptor Only)
20V/12V MAX Grey Heated Hoodie(Hoodie and Adaptor Only)
40V MAX XR Brushless 15” String Trimmer Kit(6.0 Ah)
20V MAX XR Brushless 13” String Trimmer Kit(5.0 Ah)
40V MAX 22” Hedge Trimmer Kit- (4.0 Ah)
20V MAX XR Brushless Blower Kit- (5.0 Ah)
20V/12V MAX Lithium Ion Soft Shell Heated Jacket Kit
REG$249
REG$399
REG$329
REG$249
$199 $199
40V MAX XR Brushless Blower Kit- (4.0 Ah)
REG$329
REG$329
REG$239
REG$239
$229 $279 $229
$269
OUTDOOR TOOLS
$49.99REG: $59.99
$375REG: $399
Quick Drive #8X1 3/4” Yellow Zinc Wood Screws-2000 pcs / box
Quick Drive Complete Contractor System-1-3” screws, DeWalt motor
$10.99 $12.99
UNIVERSAL BOND SEAL- the ultimate MS Polymer adhesive sealant -bonds, seals and mounts, even underwater; has a high tensile strength of 27kg / sq cm-UV & weather resistant; impedes fungal & bacterial growth-odourless and can be painted-cures without shrinking, resists vibrations and remains flexible- comes in 8 different colours
INSTANT GRAB ADHESIVE-instant grab MS Polymer adhesive-developed for high strength initial bond-fixes large panels and heavy objects without support or mechanical fixings-has high tensile strength and cures without shrinking, resists vibrations and remains flexible-available in grey or white.
SAVE $200
BONUS FREE
GLOVES
BONUS FREE
GLOVES
BONUS FREE
GLOVES
30% OFF
WEDGE-BOLT® +Screw anchor- from 1/4 to 3/4” diameter up to 10” long in stock
TAPPER+ CONCRETE SCREWBoxes of 100 or 1000- 3/16” & 1/4” diameter up to 4” long in stock
SS WEDGEBOLT- 1/4”, 3/8’ & 1/2” diameter, up to 6” long in stock
TRIGGERFOAM WINDOW & DOOR FOAM
POWER-STUD+® SD2*Wedge Expansion Anchor- from 1/4 to 7/8” diameter up to 10” long in stock
AC100+ GOLD®Vinylester Injection Adhesive Anchoring System
$12.99
$17.99
OF POWERS PRODUCT & RECEIVE
OF POWERS PRODUCT & RECEIVE
OF POWERS PRODUCT & RECEIVE
BUY $250
BUY $500
BUY $1000
A FREE DEWALT TOUGH BOX
A FREE DEWALT RECIP SAW
A FREE DEWALT 1” SDS ROTARY HAMMER
$20 VALUE$60 VALUE
$379 VALUE HAVE ENGINEERED SPECS TO MEET?Talk to Powers at the booth and find out how Powers
Fasteners can save you money!
Ask us for a quote for your next project
Segmented Diamond Blade5” - $35.99 $17.997” - $49.99 $24.99
14” x .125” x 1” Dry Cutting Concrete Diamond BladeFor concrete, paving stones, block 14” - $179 $8912” - $149 $74
14” Diamond Segmented Cutting Wheel14” - $199 $99
4-1/2” x 5/8”-11 Turbo Segmented Cup WheelFor concrete, paving stones, block 4-1/2” - $69.99 $34.995” - $99 $49.507” - $149 $74.50
Double Row Cup Concrete Diamond Grinding Wheel5” - $99 $497” - $129 $64
10” Diamond Tile Saw Wheel10” - $53 $26
4 ½” Segmented Diamond Blade4-1/2” - $24.99 $12.49
14” General Purpose Diamond Wheel14” - $59 $29
14 X 20mm Multi EX Carbide Segmented BladeCuts almost anything, rip thru all types of building materials quickly14” - $269 $134
7” Segmented Diamond Blade7” - $49 $24.50
50%OFF
50%OFF
50% OFF ABMAST DIAMOND WHEELS
BUY 2 CASESGET 1 FREE!
Reg. $349
$319
Reg. $1999
$1899
Reg. $529
$449
Reg. $1299
$1199
Reg. $1199
$1099 Reg. $1399
$1299
“THE BULL” 2HP HAND CARRY AIR COMPRESSOR4.3 gallon tank, 4.1 CFM@90PSI, Oil lubricated
5.5HP WHEELED GAS COMPRESSOR- 9.3 CFM@90PSI, Oil lubricated, 9 gallon tank
6.5HP WHEELED GAS COMPRESSOR- 13.8 CFM@90PSI, Oil lubricated, 9 gallon tank
JOBSITECOMPRESSOR- 6.5 CFM@90PSI, Oil lubricated, 5.3 gallon tank
5HP 60 GAL SINGLE-STAGE STATIONARY COMPRESSOR- 5HP 16 CFM@100PSI, three cast iron cylinders, splash oil lubricated9HP TWO-WHEELED
GAS COMPRESSOR20.1 CFM @ 90PSI, Two stage pump, 9 gallon tank
Reg. $329
$289
1 HP OIL-FREE HAND CARRY COMPRESSORSuper-quiet. Only 60 db2.3 CFM @ 90 PSI
HEAVY DUTY ALUMINUM SAWHORSE
6900 SERIESFIBERGLASSSTEP LADDER
JLT ALUMINUM COMBINATION LADDERSSTILL THE STRONGEST, BEST BUILT MULTI-POSITION LADDER SYSTEMJLT18 $379 $349JLT22 $429 $389JLT26 $479 $429
6903 - 3’ $89 $796904 - 4’ $99 $896906 - 6’ $109 $946908 - 8’ $139 $129
3702 -2’ $74.99 $643703 -3’ $94.99 $843704 -4’ $119.99 $99
24’ D-RUNG- $339 $29928’ D-RUNG- $399 $34932’ D-RUNG- $429 $38936’ D-RUNG- $529 $48940’ D-RUNG- $629 $579
20’ D-RUNG- $219 $19924’ D-RUNG- $249 $22928’ D-RUNG- $289 $25932’ D-RUNG- $319 $27936’ D-RUNG- $399 $36940’ D-RUNG- $499 $449
4200 SERIES EXTRA HEAVY DUTY BOX BEAM ALUMINUM EXTENSION LADDER
3200 SERIESEXTRA HEAVY DUTY I-BEAM ALUMINUM EXTENSION LADDER
• No bearings or drawer slides to wear out or fail• Dirt & dust won’t affect the hinge plus it won’t bind even when loaded• Flat drawer bottoms, never worry about something catching or jamming on drawer above• Truly built to last, the patented Swivel Drawer Hinge strength, durability and low resistance is based on fully welded heavy gauge steel that swivels on a solid 1” cold rolled steel shaft with a grease fitting in each drawer• Secure tamper-proof locking systems• Durable powder-coat paint finish• Manufactured in North America
IT’S BETTER TO SWIVEL THAN SLIDE
5” PS33 SANDING DISCS-PSA or Hook & Loop
45%OFF10%
OFF
CAR REAMERSStandard Flute, three flats on shank; 3/8” - 1-1/4” - Specifically designed for the reaming of structural steel plates
ALL ANNULAR CUTTERS- From 7/16 - 2” in 16th Increments- 1” and 2” depth in stock
MAGNUM SUPER PREMIUM 135° SPLIT POINT- From 1/16 - 1/2” - 135°
29PC MAGNUM SUPER PREMIUM JOBBER DRILL SET- From 1/16 - 1/2”
MAGNUM SUPER PREMIUM 8PC SET- 9/16” - 1”
20%OFF
10%OFF
10%OFF
Reg. $114.99
$94
Reg. $289$239MAGNUM SUPER PREMIUM- 17/64 - 1-1/2 - With 1/2” Shank
SANDING BELTS-40-150 Grit
3” x 21” $2.24/ea3” x 24” $2.24/ea4” x 24” $2.46/ea
SALE $29/box of 100 REG $53/box of 100
25%OFF
MP360SDPROMAX PUNCH™ 360 12T HYDRAULIC PUNCH w/ STAINLESS STEEL CUTTING DIES
• A lightweight hydraulic knockout tool that can easily operate in most tight spaces
• Lightweight aluminum head• Powerful 12 ton compact drive• Complete set of stainless steel
cutting dies – 1/2” to 2”
MB1000BENDstation™ PRO• Unique dual bending shoe,
designed for both 3/4” & 1” EMT• Stores tools and up to 900’ of conduit• Integrated 60” Ruler
• Ratchet makes bending easier with a protractor for accuracy• Built in vice holds conduit in place
BUY BUY
MP03PROSTAINLESS STEEL LARGE DIE SET (2½”- 4”)
2729-21M18™ FUEL™ DEEP CUT BAND SAW KIT
BUY A MP360SD ($1019) MAX PUNCH™ 360 12T HYDRAULIC PUNCH WITH MILD STEEL CUTTING DIES AND GET A FREE* MP03 MILD STEEL LARGE DIE SET (2½”- 4”), A $655.50 MSRP RETAIL VALUE.
and get a
FREE!*
and get a
FREE!*
These offers are only valid for orders placed between September 10, 2015 and November 10, 2015. *Free promotional items are subject to availability and limited quantities. Should demand exceed availability, distribution will be based on date of order. This offer is only valid at Millbank Country Hardware. Please see representative for details. © 2015 Southwire Company, LLC. All Rights Reserved. ® Registered Trademark and ™ Trademark of Southwire Company, LLC.
1-800-668-0303SOUTHWIRETOOLS.CA
OR
$1349 $2799
$1,207.50MSRP RETAIL
VALUE!
$549.00MSRP RETAIL
VALUE!
Bonus 3 Ton Vehicle
Stands
Heavy Duty Bottle Jack- Can be used in vertical and horizontal positions (valve side down)
JET Hydraulic Bottle Jack - Super Heavy Duty- All models work in upright, angle or horizontal positions- Unique valving allows handle to remain in upright position when used horizontally for improved operation- Also available in Low Profile Models(valve side down)
L-90 Series Chain Hoist- Class V+ load chain is the world’s strongest grade
5’ Lever Chain Hoist- Class V+ load chain is the world’s strongest grade
2-1/2 Ton Service Jack- 5” -19-1/4” height capacity
* while quantities last
2 ton $29.994 ton $42.996 ton $47.99
2 ton $49.993 ton $62.995 ton $76.998 ton $92.9912-1/2 ton $123.9922-1/2 ton $195.9935 ton $339.9960 ton $899.00
½ ton 10 ft $319½ ton 20 ft $4491 ton 10 ft $3691 ton 20 ft $5092 ton 10 ft $6392 ton 20 ft $7993 ton 10 ft $8793 ton 20 ft $1099
½ ton $329¾ ton $3791½ ton $4393 ton $739
$199REG: $239
PREMIUM FULL BODY HARNESS5 points of adjustment; Large forged D-Ring makes for easy lanyard connection;
FULL BODY COMPLIANCE HARNESS3 points of adjustment Single D RingQuick donning buckles
Reg. $49.99$34.99Reg. $169$139
VERTICAL LIFELINE25’ $49.99 $44.9950’ $79.99 $59.99100’ $109.00 $94.00
Reg. $199$169PEAKPRO ROOFER’S KITIncludes harness, ADP rope grab w/lanyard, reusable roof bracket and 50’ lifeline
Reg. $145
$119
SHOCK ABSORBING LANYARD- with 2’ Rope Grab
25%OFF
ALL PIONEER SAFETY WEAR
HI-VIZ MICRO MESH T-SHIRT
HI -VIZ TRAFFIC VEST
ATV ALL-TERRAIN VISE- fits in 2” receiver hitch* while qtys last
6 1/2” UTILITY WORKSHOP VISE - includes free 4lb 12” Bash hammer* while qtys last
DRILL PRESS VISE RAPID ACTING NUT
8 LB HEAD, 36” B.A.S.H SLEDGE HAMMER
Reg. $249
$199Reg. $199
$169Reg. $369
$329Reg. $129.99
$109
UNBREAKABLE HANDLE!
12” EZS CLAMPS
12” CLASSIX™ CLAMP
12” CLASSIC– HEAVY DUTY PAD
24” K-BODY REVO FIXED JAW PARALLEL CLAMP
12” BAR CLAMP 12” X 5½” BAR CLAMP
OFFSET SNIPS 3/4” H-STYLE PIPE CLAMP
Reg. $24.99
$21Reg. $34.99
$28.99Reg. $69.99
$54.99Reg. $69.99
$49.99
Reg. $89
$79Reg. $43.99
$37.99Reg. $37.99
$29.99Reg. $18.99
$13.99
FEIN MAG DRILL- 2 speed variable speed with reverse- Up to 2” drilling or 5/8” tapping
DUST EXTRACTOR- with tool set
Reg. $1999$1899 Reg. $499$449FEIN MULTIMASTER TOP SET
Reg. $429$349
10” 60 TOOTH FINE FINISH SLIDE MITRE BLADE
6 1/2” 18 TOOTH CIRC. SAW BLADE
10” 80T MELAMINE BLADE
7 1/4” FAST FRAMING CIRC. SAW BLADES
Reg. $49.99
$39Reg. $11.49
$8.99Reg. $79.99
$64.99Reg. $11.99
$7.99
2PC COBRA PLIERS SET
10” PLIERS WRENCH
10” COBRA WATER PUMP PLIERS
12” COBRA WATER PUMP PLIERS
Reg. $84.99
$67.99Reg. $70.99
$56.99
Reg. $46.99
$37.59Reg. $65.99
$52.99
GERMAN BUILT LIFETIME WARRANTY
20% OFF ALL WOODMAXX SCREWS
FLAT HEAD WOOD SCREWS, ROUND WASHER HEAD POCKET HOLE SCEWS, (FINE AND COARSE THREAD)
JARS AND PAILS IN STOCK. CALL FOR PRICING
FEIN MULTI-MASTER BLADES
20% OFF
MAIL IN REBATE
FOR 2 FREE GRINDERS
CONVOY SUPER CAULK GUNReg. $25.99
$18.99
TAJIMA SNAP-LINE DYE SEMI-PERMANENT SNAP-LINE CHALK32ozRed or Black
Reg. $19.99
$14.99
CHALK SNAP LINEAvailable in Red or White
Reg. $34.99
$29
10” MAGNETIC TORPEDO LEVEL
6-10’ PLATE TO PLATE LEVEL
JAMMER SET- includes 78” & 32” levels
48” TECH LEVEL- digitally displays degrees, %, feet/inches and mm/m
DISTANCE MEASURER- with tripod- 660’ range
19 POCKET FRAMER’S COMBO APRON
11” ELECTRICAL & MAINTENANCE TOOL CARRIER W PARTS TRAYReg. $159
Reg. $99
$134
$79
Reg. $139
$99
11 POCKET DELUXE LEATHER CONTRACTOR APRON
HEAVY DUTY FRAMER’S COMFORTLIFT SYSTEM
Reg. $59$49
27 POCKET - CLC PROFRAMERS COMBO SYSTEM
Reg. $169$134 Reg. $89.99$74
31 POCKET CARPENTERS APRON
$26.99REG: $34.99
$269REG: $319
$199REG: $249
$239REG: $279
$489REG: $549
50% OFF
CROSSLINE LASER
3-PC PRO LEVEL SETincludes torpedo, 24” & 48” levelReg. $129
2-PC PREMIUM LEVEL SET16” and 48” level w/ hand holds Reg. $129
48” R-BEAM LEVEL- includes free case 48” Reg. $129
48” MASONS LEVEL48” Reg. $129
LD320 DISTANCE MEASURER 130’ range Reg. $139 48” MAGNETIC
LEVEL W/ HAND HOLDSReg. $129
$99each
YOUR CHOICE!
STABILA LEVELS
TOPRING EASYFLEX AIR HOSE- Extrememly flexible to -40°- 35% lighter than rubber hose
EXTENSION CORD- Heavy-duty Type SJTW cords, 0 degree cold weather jacket, Water and ame resistant
14/3- 50’-14/3- 100’-12/3- 50’-12/3- 100’-10/3- 50’-10/3- 100’-
Reg Sale
$35.99$64.99$54.99$89.99$99.99
$159.00
$31.99$57.99$44.99$79.99$89.00
$139.001/4” x 50’ $39.99 $32.991/4” x 100’ $67.99 $54.99
3/8” x 50’ $145.99 $38.993/8” x 100’ $79.99 $64.99
$149REG: $299
DISTANCE MEASURER- with tripod- 660’ range
Pump Controller1 Zone $119.99 $1093 Zone $214.00 $1895 Zone $316.00 $279
Predesigned and Fabricated Boiler Boards – call for Options and Pricing
Cast Iron Pump15 GPM $109 $9525 GPM $249 $225
Glycol Feeder•6 Gallon
$169REG: $189
1” Mixing Valve• Sweat or NPT
$569REG: $649
Boiler – propane or natural gas in stock
$3299REG: $3799
Glycol•20L Pail
$119REG: $149
Plate Heat Exchanger•4-1/2” x 11”•1” NPT x 30 plate
$239REG: $269
Heating Manifold3 Loop $242.00 $1994 Loop $275.00 $2296 Loop $349.00 $2698 Loop $425.00 $33910 Loop $899.00 $75912 Loop $999.00 $899
$199REG: $215Wall Mount Radiator• 26½ x 30” x 3½”
3-Row Radiator Coil17” x 20 $301 $26923” x 24” $393 $349
1/2” x 50’ $17.99
1/2” x 100’ $34.991/2” x 500’ $154.993/4” x 20’ $13.993/4” x 100’ $64.991” x 500’ $495.00
OXYGEN BARRIER PIPE1/2” x 300’ $961/2” x 600’ $1921/2” x 1000’ $320
1” PEX ALUMA PIPE 3.99/ft
Expansion Tank2 Gal $44.99 $39.994 Gal $59.99 $49.996 Gal $73.99 $64.99
Pex Pipe
Cut to Size Manifold Material- 1” main x ½” outlet- 72” long x 24 outlet
$179REG: $199
36” 175 WATT METAL HALIDE WORK LIGHT- 15000 lumens, 10000 hr lamp, 24-45ft light range
36” 400 WATT METAL HALIDE WORK LIGHT- 40000 lumens, 20000 hr lamp, 50-100ft light range
27” 85 WATT FLOURESCENT WORK LIGHT- 5000 lumens, 8000 hr lamp, 15-25ft light range
HANG-A-LIGHT400 WATT PULSE START METAL HALIDE- 42000 lumens, 20000 hr lamp, 50-100ft light range
Reg. $299 Reg. $349
Reg. $199 Reg. $189$284 $315
$179 $169
1 HP DUST COLLECTOR
17” DRILL PRESS 22” DRILL PRESS 14” WOOD CUTTING BANDSAW
10” - 2 HP CABINET SAWleft tilt
13” PLANER WITH HELICAL HEAD
15” PLANER3HP motor2 feed speeds (16 FPM, 20 FPM)
DELUXE ROUTER TABLE KIT32” x 24” cast iron tableabove the table adjustment mechanism for fast tool changes and precision bit setting
Reg. $589
$529
Reg. $659
$589Reg. $1159
$1039Reg. $699
$629Reg. $1499
$1349
Reg. $689
$619Reg. $2499
$2249Reg. $1499
$1349
8” PRO DADO SET
10” 40-TOOTH 30-DEGREE HI-ATB PREMIER FUSION THIN KERF BLADE
Reg. $149
$119
6 1/2” FRAMING BLADE
Reg. $18.99
$13.99
7 1/4” FRAMING BLADE
Reg. $15.99
$13.99
12” 48 TOOTH THIN KERF GENERAL PURPOSE SAW BLADE
Reg. $61.99
$48.99
14” 70 TOOTH ATBF COMBINATION SAW BLADE
Reg. $179
$149
10” 30T GLUE LINE RIP
Reg. $69.99
$49.99Reg. $69.99
$59.99
12” 72T FINE FINISH BLADE
Reg. $102.99
$84
10% OFF ALL GENERAL MACHINERY
ALL FREUD ROUTER BITS
20% OFF
JAMB SAW KIT
60 GALLON AIR COMPRESSOR11.2 CFM @ 90PSI,150 PSI Max
ULTRA-QUIET OIL-FREE AIR COMPRESSOR2.35 CFM @ 90PSI
12” X 18” VARIABLE SPEED WOOD LATHE
20” PLANER 10000W GASOLINE GENERATOR WITH ELECTRIC START & WHEEL KIT
15” PLANER WITH SPIRAL CUTTERHEAD
INDUSTRIAL SLIDING TABLE ATTACHMENT
17” WOOD BANDSAW WITH RESAW GUIDE
6” JOINTER16 GALLON WET/DRY VACUUM
14” WOOD BANDSAW WITH RESAW GUIDE
SINGLE SPINDLE ELECTRIC POCKET HOLE MACHINE
FOREMAN POCKET-HOLE MACHINE- accessory bundle includes quik bit, 2 driver bits, 1000 screws & screw selector wheel
REPLACEMENT STEP DRILL FOR MACHINE POCKET HOLE SYSTEMS
K5 KREG JIG PRECISION TRAK AND STOP KIT
Reg. $229
$205
Reg. $1599
$1439
Reg. $279
$249
Reg. $4099
$3899
$499Reg. $39.99
$32Reg. $174.99
$159
Reg. $149
$134
Reg. $799
$719
Reg. $2499
$2249
Reg. $549
$494
Reg. $749
$674
Reg. $999
$899
Reg. $659
$593
Reg. $2399
$2599
Reg. $599
$539
10% OFF ALL KING MACHINERY
FREEACCESSORY
BUNDLE
FREEORGANIZER
$199
30%OFF
ALLDEWALT & BOSTITCH
TOOLS
TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!
Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.
While every effort is made to avoid mistakes, we reserve the right to correct printing errors. While quantities last.
10” Job Site Table Saw with Rolling Stand- 32-1/2” Rip Capacity
10” Compound Mitre Saw
12” Compound Mitre Saw
10” Sliding Double Bevel Compound Mitre Saw
10” Wet Tile Saw with Stand
24” ripping capacity -18” tile on diagonal;3-1/8” depth of cut allows for cutting of V-cap and pavers
12” Sliding Double Bevel Compound Mitre Saw
$559REG: $799
$1189REG: $1699
$769REG: $1099
1” L-Shape SDS Rotary Hammer Kit- 8.0A
1” L-Shape SDS Rotary Hammer Kit w/ Quick Change Chuck- 8.0A
Pavement Breaker w/ Hammer Truck and Bits
1-3/4” SDS Max Combination Hammer Kit with SHOCKS
2” SDS Max Hammer with CTC
$489REG: $699
10 Gallon Wet/Dry HEPA Dust Extractor with Automatic Filter Cleaning
10” Compact Job Site Table Saw
13” Three Knife Two Speed Thickness Planer- with stand
$265REG: $379
$293REG: $419
$1399REG: $1999
$314REG: $449
$188REG: $269
$475REG: $679
30% OFFREG: $849
30% OFFREG: $799
30% OFFREG: $749
30% OFFREG: $479