Phone: 519-595-4212 Toll Free: 1-866-595-5015 6980 Main St. Millbank

SEPTEMBER

OPENHOUSE

2 DAY WOODWORKING AND TOOL EVENT SEPT 24-25, 2015 9AM−8PM

OVER 35 VENDOR DISPLAYS!

20% OFF

BBQ, COFFEE & DONUTS, DEMONSTRATIONS & NEW PRODUCTS ON DISPLAY!

CAN’T MAKE IT THE 24TH OR 25TH? CALL US WITH YOUR ORDER BEFORE THE 24TH − 519-595-4212

50%OFF

ALL DEWALT ACCESSORIES

50%OFF

30% OFF ALL DEWALT

TOOLS

PURCHASE A DEWALT TOOLENTERTO WINA DEWALT TOOLBOX & TOOLS$2000 VALUE!

MILWAUKEE ACCESSORIES

ALL OPEN STOCK

MILWAUKEE TOOL

TRADE-INEVENT

MAKITA FREE BATTERY EVENT

30%OFFALL DEWALT TOOLS

TRADE IN YOUR OLD TOOLS!TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

$299REG: $429

$439REG: $629

$229REG: $329

$251REG: $359

$230REG: $329

$244REG: $349

20V Max Grinder Tool Kit (5.0 Ah)

20V Premium 3-Speed Hammerdrill Kit (4.0Ah)

20V XR Brushless Premium Hammerdrill & Impact Driver Combo Kit (4.0Ah)

20V MAX SDS 3 Mode Rotary Hammer Drill Kit

20V MAX 1/2” Impact Wrench Kit

20V MAX Brushless Drywall Screwgun & Cut-Out Tool Combo Kit(2.0 Ah)

20V MAX XR Brushless Drywall Screwgun Kit (2.0 Ah)

20V MAX Premium 5-Tool Combo Kit (3.0Ah)

20V MAX 7 1/4” Sliding Miter Saw Kit (w/Battery & Charger)1- 4.0 AH Battery

$489REG: $699

30% OFFREG: $499

$229REG: $329

20V Brushless 3-Speed 1/4” Impact Driver Kit (4.0Ah)

$188REG: $269

20V MAX XR Brushless High Torque 1/2” Impact Wrench Kit- w/indent and 2-5.0 Ah batteries

$384REG: $549

NEW

Free 5.0 Ah Battery with select Dewalt kits. Visit the Dewalt booth for details*while supplies last

30%OFFALL DEWALT TOOLS

TRADE IN YOUR OLD TOOLS!TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

12V TOOLS

$159 REG: $229$125 REG: $179

$439REG: $629

$223REG: $319

$199REG: $289

20V MAX* XR Li-Ion Brushless 1/4” Impact Driver Kit (2.0Ah)

20V MAX Grease Gun Kit- 4.0 Ah

12V Hand Held Wall Scanner Kit

20V MAX Compact 2 PC Kit (1.5 Ah)

20V MAX XR Brushless Framing Nailer Kit- 4.0 Ah- Dual Speed Model

20V XR Lithium Ion Brushless Compact Hammerdrill Kit (2.0Ah)

12V Drill/Driver Kit 12V Drill/Impact Combo Kit

$199REG: $289

20V MAX XR Li-Ion Brushless Compact Hammerdrill & Impact Driver Kit (2.0Ah)

20V MAX 1/2” High Torque Impact Wrench Kit (4.0 Ah)

20V MAX XR Oscillating Multi-Tool Kit (2.0 Ah)

$279REG: $399

$181REG: $259

$349REG: $499

BONUSFREE

HAMMER & TRI-SQUARE

Free 5.0 Ah Battery with select Dewalt kits. Visit the Dewalt booth for details*while supplies last

30% OFFREG: $389

30% OFFREG: $259

30%OFFALL DEWALT TOOLS

18V XRP Hammerdrill Kit 18V 1/4” XRP Impact Driver Kit 18V XRP Hammerdrill / Impact Driver / Recip Saw Kit

1/2” VSR Stud & Joist Drill- with Clutch and Bind-Up Control®

$489 REG: $699 $272REG: $38918 V XRP 6-Tool Combo Kit

18V 18 Ga. Straight Cordless Nailer Kit

$83REG: $119

18 Gauge 2” Brad Nailer Kit

$83REG: $119

18 Gauge 1-1/2” x 1/4” Narrow Crown Stapler Kit

Coil Roofing Nailer

$97REG: $139

18 Gauge Precision Point Brad Nailer

18V Cordless XRP 16 Gauge Straight Finish Nailer Kit

1 3/4 HP Router- Fixed base

1/2” VSR Pistol Grip Hammerdrill

$314REG: $449

$139REG: $199

$153REG: $219

TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

1-1/4 HP Max Torque Variable Speed Compact Router- with LED’s

$132REG: $189

$209 REG: $299 $181 REG: $259 $335 REG: $479 $328 REG: $469

30%OFFALL DEWALT TOOLS

5” Random Orbit Sander

$181REG: $259

$69REG: $99

2 in 1 Flooring Tool

$181REG: $259

Coil Roofing Nailer

1/2” Spade Handle Drill

4 1/2” Grinder- 11,000rpm 10A

5” / 6” Grinder- Rat Tail 10,000rpm 13A

7” Medium Angle Grinder

Corded Reciprocating Saw- 12.0 Amp

14” Chop Saw- 3,800 rpm, 15A

7 1/4” Lightweight Circular Saw

7 1/4” Lightweight Circular Saw- electric brake

$132REG: $189

$87REG: $125

$111REG: $159

$118REG: $169

$159REG: $229

$89REG: $129

$125REG: $179

TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

1-1/2” Die Grinder

$153REG: $219

Metal Connector Nailer

$209REG: $299

Coil Siding & Fencing Nailer- 1-1/4” - 2-1/2”

$279REG: $399

Coil Roofing Nailer

$209REG: $299

$69REG: $99

30%OFFALL DEWALT TOOLS

TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

20V MAX Reciprocating Saw- bare tool

20V MAX XR Brushless 2 Speed Nailer- bare tool

20V MAX 1/4” Brushless 3-Speed Impact Driver- bare tool

20V MAX XR Brushless High Torque 1/2” Impact Wrench - Detent Pin Anvil- bare tool

$125REG: $179

$111REG: $159

20V Premium Brushless 3-Speed Hammerdrill- bare tool

20V 6-1/2” Circular Saw- bare tool

20V XR Brushless 1/4” Impact Driver- bare tool

20V 1/2” Impact Wrench- bare tool

$118REG: $169

$132REG: $189

20V Jig Saw- bare tool

$76REG: $109

20V Battery Pack (4.0 Ah)

$89REG: $129

20V Battery Pack (5.0 Ah) 20V 4 ½” Cut-Off Tool- bare tool

20V SDS 3 Mode Rotary Hammer- bare tool

20V MAX 1/4” Brushless 3-Speed Impact Driver- bare tool

20V MAX 7 1/4” Sliding Miter Saw- bare tool

20V MAX XR Brushless Drywall Screwgun- bare tool

$125REG: $179

$118REG: $169

$89REG: $119

$104REG: $149

20V 3/8” Right Angle Drill- bare tool

20V Drywall Cutout Tool- bare tool

18/20V MAX Cordless Wet-Dry Vacuum- bare tool

20V XR Oscillating Multi-Tool- bare tool

$83REG: $119

$111REG: $159

$244REG: $349

$111REG: $159

$111REG: $159

$377REG: $539

$132REG: $189

$209REG: $299

$111REG: $159

30% OFFREG: $419

30%OFFALL DEWALT TOOLS

TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

20V 6-1/2” Circular Saw- bare tool

18V 7/8” SDS Hammer- bare tool

18V Cut-Off Tool- bare tool

18V XRP Battery Combo Pack

Heavy Duty Heat Gun

$97REG: $139

$97REG: $139

18V Jig Saw- bare tool

18V Recip Saw- bare tool

18V Circular Saw- bare tool

18V 18 Guage Brad Nailer- bare tool

18V 1/2” Impact Wrench- bare tool

18V Cordless Grease Gun- bare tool

Electric Jig Saw

18V Impact Driver- bare tool

18V 1/2” XRP Hammerdrill- bare tool

18V 1/2” High Torque Impact Wrench- bare tool

$104REG: $149

$90REG: $129

$111REG: $159

$132REG: $189

$209REG: $299

$111REG: $159

$153REG: $219

$181REG: $259

Heavy Duty Miter Saw Stand

Rolling Miter Saw Stand

20V MAX LED Work Light

$45REG: $64.99

20V MAX Jobsite LED Spotlight

$83REG: $119

20V Max LED Hand Held Area Light

$45REG: $64.99

18V / 20V MAX Cordless / Corded LED Worklight

$90REG: $129

18V / 20V MAX Cordless LED Worklight

$76REG: $109

$244REG: $349

$97REG: $139

30% OFFREG: $149

$62REG: $89

$132REG: $189

$139REG: $199

DEWALT LIGHTING

M12 FUEL 1/4” Impact Driver Kit

M12 FUEL 1/2” Hammer Drill/Driver Kit

M12 FUEL 2-Tool Combo Kit

$289REG: $339

$199REG: $249

$169REG: $219

M18 FUEL Brushless 6-Tool Combo Kit- 4.0 Ah

M18 FUEL Brushless 2-Tool Combo Kit- 4.0 Ah

M18 FUEL Brushless 1/4” Hex Impact Driver Kit- 4.0 Ah

M18 FUEL Brushless 1/2” Hammer Drill/Driver Kit- 4.0 Ah

$1049REG: $1149

M18 FUEL 6-1/2” Circular Saw

M18 FUEL SAWZALL Reciprocating Saw

M18 FUEL 1-1/8” SDS Plus Rotary Hammer

M18 FUEL 1/2” Impact Wrench with Pin Detent- 210 ft lb torque

$279REG: $379

M18 FUEL 7-1/4” Circular Saw

$279

M18 FUEL Deep Cut Band Saw- 5” x 5” capacity

$379

$399

M18 FUEL HOLE HAWG 1/2” Right Angle Drill

$319

$269REG: $369

M18 FUEL Brushless 1/2” High Torque Impact Wrench with Friction Ring Kit- 700 ft lbs torque in FWD. 1100 ft lbs in reverse.- 4.0 Ah

M18 FUEL 1-1/2” Magnetic Drill Kit- 4.0 Ah

$429REG: $529

$2399REG: $2499

$299REG: $449

$150 OFF* PLUS FREE

5.0 Ah BATTERY!

+

$100 OFF* PLUS FREE

5.0 Ah BATTERY!

+

$199

$239

$239

* TRADE-IN YOUR OLD TOOL TO GET PRINTED SALE PRICE

* GET $50 OFF ANY M12 FUEL KIT WITH TRADE-IN

$100 OFF* PLUS FREE

5.0 Ah BATTERY!

+

$100 OFF* PLUS FREE

5.0 Ah BATTERY!

+

$100 OFF* PLUS FREE

5.0 Ah BATTERY!

+

$100 OFF* PLUS FREE

5.0 Ah BATTERY!

+

$100 TRADE-IN* DISCOUNT + FREE BATTERY

$50 TRADE-IN* DISCOUNT + FREE BATTERY

M18 FUEL 4-1/2” / 5” Grinder Slide Switch Lock-On

$239

BUY ANY 2—M18 FUEL

BARE TOOLS

AND GET A FREE 5.0 AH

BATTERY & CHARGER KIT

$50 OFF* PLUS FREE

4.0 Ah BATTERY!

+ $50 OFF* PLUS FREE

4.0 Ah BATTERY!

+ $50 OFF* PLUS FREE

4.0 Ah BATTERY!

+

OPEN STOCK ACCESSORIES 50%

OFF ALL HAND TOOLS

$199REG: $269 $12

REG: $16.79

$199REG: $259

$29.99REG: $39.99

TiBone 15 OZ Titanium Smooth or Milled-Face Hammer 7” Rafter Square/9”

Torpedo Level Combo

Tibone Mini-14 Oz. Smooth Face With Curved 16” Ti Hdl.

12-in Stainless Steel Clawbar

10” Torque Lock Curved Jaw Locking Pliers

ProPEX/Tubing Cutter

FASTBACK Flip Utility Knife

Gray Hoodie Kit- includes 12V battery & charger

$179REG: $199

Black Hoodie Kit- includes 12V battery & charger

Heated Jacket Kit- includes 12V battery & charger

$229REG: $249

$179REG: $199

$10.74REG: $13.99

$22.49REG: $29.99

$9.74REG: $12.99

M18 Cordless 2-Speed Grease Gun Tool Only

M18 XC 4.0 XC Battery Pack

M18™ Compact Drill / Driver Kit

M18 Cordless Wet/Dry Vac Tool Only

$149REG: $179

$115REG: $129

$179REG: $199

15.0 Amp Super Sawzall® Recip Saw

28 PC All Purpose Professional Hole DozerHole Saw Kit

40PC Shockwave Drill & Drive Set

12 PC Sawzall Blade Set

$24.99REG: $34.99

$24.99REG: $29.99

$199REG: $279

BUY ONE GET ONE

FREE!

FREE 12V

PRODUCT!

+ FREE 12V

PRODUCT!

+ FREE 12V

PRODUCT!

+

25% OFF

$119

$229REG: $259

20%OFF20%20%

MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!

18V X2 25-1/2” Cordless Hedge Trimmer- bare tool

18V X2 12” Cordless Chainsaw- bare tool

18V X2 36 Volt Cordless Line Trimmer- bare tool

18V 6-1/2” Circular Saw

18V 15/16” Rotary Hammer

18V 5” Angle Grinder

18V 1/4” Impact Driver

18V 1/2” Hammer Driver Drill

18V 1/2” Impact Wrench

18V Jig Saw

18V 1/4” Drywall Screwdriver

18V 1/4” Impact Driver

ALL OTHER MAKITA TOOLS

+

18V BRUSHLESS BARE TOOLS

BONUS! BATTERIES

& CHARGER

BONUS! BATTERIES

& CHARGER

Outdoor Power Equipment

BUY $500* AND GET YOUR CHOICE OF A

FREE 3.0 AH BATTERY OR BIT SET

$175REG: $219

$255REG: $319

$159REG: $199

$159REG: $199

$175REG: $219

$167REG: $209

$199REG: $249

$175REG: $219

$111REG: $139

FREE BATTERY+FREE

BATTERY+ FREE BATTERY+

$349REG: $399

$749REG: $799

$599REG: $649

18V LXT 3.0AH Hammerdrill/Impact Driver Combo Kit

18V LXT 6pc Cordless Combo Kit4.0 AH

18V LXT 4pc Cordless Combo Kit 4.0 AH

INCLUDES A FREE FLASH-LIGHT

*in makita tools

$379REG: $419

3 HP Air Compressor- 6.5 cfm @ 90 psi

5” Random Orbit Sander

3-1/4” Planer14” Portable Cut-Off Saw

5” Angle Grinder

$359REG: $449

$79REG: $99

$159REG: $199

$151REG: $189

20% OFFREG: $159

$269REG: $339

$379REG: $399

20%OFF20%20%

MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!MAKITA FREE BATTERY EVENT!

14” Power Cutter

24.5cc Line Trimmer

2 Stroke TrimmerStraight Shaft

*These cordless kits and outdoor tools are excluded from the 20% off and free goods promo below.

18V Drywall Cutout Tool

18V 7-1/4” Circular Saw

18V 3-1/4” Planer

18V 3.0 Ah Li-Ion Battery

18V 5” Random Orbit Sander

18V 4.0 Ah Li-Ion Battery

18V 5.0 Ah Li-Ion Battery

18V Line Trimmer

7 1/4” Circular Saw 7 1/4” Circular Saw- with electric brake

1” SDS Rotary Hammer

1/4” Trimmer3” X 24” Belt Sander

$223REG: $279

$111REG: $139

$151REG: $189

$191REG: $239

$95REG: $119

ALL OTHER MAKITA TOOLS

+

18V BARE TOOLS

4STROKE ENGINE

$100OFF $299

REG: $399

$239REG: $299

$899REG: $999

BUY $500* AND GET YOUR CHOICE OF A

FREE 3.0 AH BATTERY OR BIT SET

$111REG: $139

$199REG: $249

20% OFFREG: $99

20% OFFREG: $129

20% OFFREG: $149

$127REG: $159

$103REG: $129

$199REG: $249

$119REG: $149

18V 300 mL Caulking Gun

FREE BATTERY+FREE

BATTERY+

$399REG: $499

$379REG: $449

$499REG: $579

18V LXT 4.0AH Hammerdrill & Brushless Impact Driver

18V LXT 3.0AH Compact Brushless Hammerdrill & Brushless Impact Driver Kit

18V LXT Brushless Cordless Hammer Drill & Impact Kit 4.0 AH

FREE BATTERY+

1” SDS-plus BULLDOG Xtreme Rotary Hammer

$229REG: $259

10” Worksite Table Saw With Gravity Rise Wheeled Stand

12” Dual-Bevel Glide Mitre Saw

13 PC DareDevil Spade Bit Set- 1/4” - 1-1/2”

$599REG: $649

$649REG: $749

1-1/8” SDS-plus Rotary Hammer

$349REG: $449

Gravity-Rise Wheeled Miter Saw Stand

$249REG: $299

7 1/4” Circular Saw w/ Diablo Blade

$119REG: $139

“The Colt” Palm Router- 1 HP

$109REG: $139

3000PSI Gas Powered Pressure Washer- 196cc Honda Engine- Includes 25’ hose

4000PSI Gas Powered Pressure Washer- 389cc Honda OHV- 3.4 GPM

3500PSI Hot Water Gas Powered Pressure Washer- 389cc Honda Engine- No 1 or No 2 diesel or kerosene fired burner

$849REG: $899

$1379REG: $1449

$4299REG: $4499

$479REG: $499 $339

REG: $369Li-ion CF325LI Cordless Framing Nailer 2”-3 1/4”- Lithium battery

Powermaster Plus Framing Nailer- 2” to 3 1/2”

1/2” Crown Construction Stapler

2” 18G Finish Brad Nailer

Coil Roofing Nailer

3 1/2” Framing Nailer

$99REG: $119

$369REG: $399

$259REG: $319

$319REG: $349

FREE2ND

BATTERY

$19.99REG: $29.99

FREE HAMMER TACKER

Self-Leveling Interior/Exterior Laser Kit• Projects 3 - 360° lines• Includes receiver and rechargeable lithium battery and charger

• 200’ operating radius

$599REG: $699

Self Leveling Laser Level Kit• Includes tripod, grade rod, and receiver

• Single axis manual slope mode• 1300’ operating diameter

$999REG: $1079

Automatic Dual Grade Laser with CR600 Combo Receiver• Single & dual dial-in grade

• With rechargable battery + charger

• CR600 receiver machine or rod-mounted

The Go-To Ceiling Laser• Green horizontal line•Includes a Lithium Battery•2 vertical red lines, 90° apart

$749REG: $799

SELF-LEVELLING LINE LASER (HORIZONTAL AND VERTICAL)

3 BEAM SELF-LEVELLING LINE LASER

30%OFF

SELF-LEVELING ROTARY LASER- Horizontal/Vertical with Tripod 9.6 V - 18V

SELF-LEVELING ROTARY LASER KIT- Kit & Laser Detector

$839 REG: $1199$384 REG: $549

$265REG: $379

30% OFFREG: $169

$499REG: $549

Combination Laser Receiver•Includes rod clamp and magnetic machine mount

• Rugged, waterproof, lightweight•Colored LED elevation indicators—up to 100m in bright sunlight

• Wraparound receiver cells with continuous pickup through 270°

• 5 on-grade sensitivities• Use with any rotating laser

DIAL-IN GRADE SELF-LEVEL-ING ROTARY LASER COM-PLETE KIT- Includes laser, receiver/remote, tripod and grade rod

Self Leveling Laser Level Kit• Includes tripod, grade rod, and receiver

• Single axis manual slope mode

• 2600’ operating diameter

• Rugged design, IP66 dust and waterproof

$1499REG: $1599

50 FT. LASER DISTANCE MEASURER

$59REG: $69.95

$1399REG: $1499

$2499 REG: $2699

Automatic Dual Grade Laser with CR600 Combo Receiver• Single and dual dial-in grade• With rechargable battery + charger

• CR600 receiver

$2999 REG: $3199

INCLUDES FREE

DISTANCE MEASURER

ALL FLAP WHEELS

Available in 40, 60, 80 or 120 Grit

ALL HP GRINDING WHEELS

ALL ROCK CARBIDE™ SDS+ BIT

ALL BULK PACK - 25 SDS+ BITS

2-3/4”-3-1/4”-4”-5”-6”-

$249 $125 $259 $129 $279 $139 $339 $169 $459 $229

ALL 22” SDS MAX CORE BITS

REG SALE5/323/161/45/163/81/2

7-1/4” 24T CARBIDE THIN KERF FRAMING BLADE

10” 40T GENERAL PURPOSE SAW BLADE

REG$49

REG$49.99

REG$17.99

REG$9.99

29 PC PILOT POINT SET

$54

• 25% Faster• 70% Longer Life• 1/16 - 1/2”

REG $109

$24.50 $24.99$8.99 $4.99

$5.99 $2.99 $5.99 $2.99 $4.99 $2.49 $6.99 $3.49 $6.99 $3.49 $8.99 $4.49

REG SALE5/8” x 16”3/4” x 16”1” x 16”1 1/8” x 10”1 1/4” x 10”1 1/2” x 18”2” x 18”

$36.99 $18.49 $45.99 $22.99 $55.99 $27.99 $59.99 $29.99 $72.99 $36.49 $119.00 $59.50 $169.00 $84.50

ALL SDS MAX DRILL BITS

REG SALE

12” 80T FINE FINISH SAW BLADE

5/323/161/45/163/81/2

$135 $67.50 $135 $67.50 $113 $56.50 $157 $78.50 $159 $78.50 $199 $99.50

REG SALE

ALL RECIPROCATINGSAW BLADES

6-1/2” 18T CIRCULAR SAW BLADE

ALL XP 1/4” GRINDING WHEELS ALL HP .045 CUTTING WHEELS ALL XP .045 CUTTING WHEELS REG SALE4 1/2” XP $4.49 $2.245” XP $4.99 $2.486” XP $5.99 $2.997” XP $9.99 $4.99

REG SALE4 1/2” $7.99 $3.995” $8.99 $4.497” $16.99 $8.49

REG SALE4 1/2” HP $1.99 $0.995” HP $2.29 $1.147” HP $3.49 $1.74

REG SALE4 1/2” XP $2.29 $1.145” XP $2.49 $1.246” XP $2.69 $1.347” XP $3.69 $1.84

REG SALE4 1/2” HP $3.69 $1.845” HP $3.99 $1.996” HP $4.69 $2.347” HP $5.99 $2.99

ALL METAL CHOP SAW WHEELS REG SALE12” x 1/8” x 1” $5.49 $2.7412” x 1/8” x 20mm $5.49 $2.7414” x 7/64” x 1” $7.99 $3.9914” x 1/8” x 20mm $9.99 $4.99

10-PIECE BI-METAL RECIPROCATING SAW BLADE SET WITH CASE

REG$28.99$14.49 REG

$34.99$17.49

40-PC IMPACT READY SCREWDRIVING KIT

• Quick Change Mandrel

HOLE SAW KITS REG SALE9PC ELECTRICIANS SET $89.99 $44.999PC PLUMBERS SET $89.99 $44.9913PC MASTERS SET $159.00 $79.50

50% OFF ALL DEWALT ACCESSORIES

AND OSCILLATINGSAW BLADES

https://www.kijiji.ca/h-guelph/1700242

50%OFF

14oz MIG Weld Framing Hammer

ToughSystem Drawer UnitXL Case ToughSystemLarge Case ToughSystem

25’ x 1-1/4” FatMax® Tape Rule Twin Pack

1/2” Drive Impact Wrench - Heavy Duty

Stanley 16’ and 25’ Tape Measure Pack

TSTAK® II - Flat Top TSTAK® I - Long Handle TSTAK® Trolley

FatMax® 30’ Tape Rule

FatMax® 48” Non-Magnetic Level

Premium Quick Square® Layout Tool

14oz FaxMax® Xtreme Weld Technology MIG Hammer

40” 8 Drawer Roller Cabinet

40” 5 Drawer Top Chest Metal Storage

Complete Set Price

Small Case ToughSystem

Tough System DS Carrier w/ Boxes

REG$59.99

REG$59.99

REG$10.99

REG$36.99$29.59

REG$169$135REG

$29.99$23.99

REG$32.99$26.39 REG

$33.99$27.19

REG$19.99$15.99

$47.99$47.99

REG$69.99$55.99 REG

$79.99$63.99

$8.79

REG$49.99

REG$629

REG$649

REG$1278

$39.99 $499

$519

$1018

REG SALE24” $26.99 $19.9948” $36.99 $29.5972” $65.99 $52.79

20% OFF ALL DEWALT & STANLEY HAND TOOLS

REG$399$319

FatMax® 28” Structural Foam Water Resistant Toolbox

30m/100’ FatMax® Chalk Line Reel and Chalk Set

REG$48.99

REG$12.99

$39.19

$10.49

Deep Pro Organizer

Jobsite LED Headlamp

REG$29.99

REG$24.99

$23.99

$18.74

REG$49.99$39.99

12” Premium Rafter Square

REG$19.99$15.99

TOUGH SYSTEM

TSTAK SYSTEM

REG$139$111

FREE GRAY TOOL EVENTFREE GRAY TOOL EVENT

42” 12-DRAWER ROLLER CABINET

2-3 JAW PULLER- 8 ton

22 PIECES SAE & METRIC LONG ARM HEX KEY SET

28” 7-DRAWER ROLLER CABINET

42” 8-DRAWER TOP CHEST

ALUMINUM PIPE WRENCHES14” $74.99 36” $299.9918” $93.99 48” $464.9924” $145.99

OF GRAY/DYNAMIC PRODUCT & RECEIVE

BUY $750

OR

$299 VALUEFREE

3/4” DRIVE 21PC 12 PT STD SAE SOCKET SET

OR

OF GRAY/DYNAMIC PRODUCT & RECEIVE

BUY $250

$79 VALUEFREE

36 PC SCREWDRIVER SET

OR

OF GRAY/DYNAMIC PRODUCT & RECEIVE

BUY $500

$169 VALUEFREE

3 TON, SINGLE OPERATOR PULLER - 2/3 JAW DESIGN

16PC SAE CONTRACTOR SERIES COMBINATION WRENCH SET

1/2” DRIVE 22-PIECE 6PT STD. SOCKET SET

$247$139$309

$26.99

$1699$549

$549$899

52” INDUSTRIAL WORKBENCH

FREE GRAY TOOL EVENTFREE GRAY TOOL EVENT

COMPARTMENT RACK W/4 COMPARTMENT BOXES

1/2” DRIVE 13 PC SAE IMPACT SOCKET SET- 1/2” - 1-1/4” Sockets

TORQUE WRENCH3/8” $1841/2” $255

9PC SCREWDRIVER SET

OF GRAY/DYNAMIC PRODUCT & RECEIVE

BUY $750

OR

$299 VALUEFREE

27” 8 DRAWER TOP CHEST

OR

OF GRAY/DYNAMIC PRODUCT & RECEIVE

BUY $250

$79 VALUEFREE

7 PC PLIER SET

OR

OF GRAY/DYNAMIC PRODUCT & RECEIVE

BUY $500

$169 VALUEFREE

3 TON, SINGLE OPERATOR PULLER - 2/3 JAW DESIGN5” DUCTILE IRON MECHANICS VISE

$161 $78.99

3PC PRY BAR SET

$99

54” MARQUIS 8-DRAWER TOP BOX

$2375

54” MARQUIS 13-DRAWER ROLLING CABINET TOOL BOX $3599

$399

ADVANCED DYNAMIC MASTER SET BUNDLE- 367 Piece Advance Master Set

- 42” Roller Cabinet- FREE foam organizers for all tools

$2949

40V MAX XR Brushless 15” String Trimmer Kit(4.0 Ah)

REG$329

$22930% OFF

STORAGE CHEST BOX30” x 48” $699 $499

** while quantities last

18” NAIL EATERS Sale Reg1/2” $28.99 $35.995/8” $31.49 $38.993/4” $35.99 $43.997/8” $39.49 $48.991” $44.99 $55.991 1/8” $55.99 $69.991 1/4” $64.99 $80.99

NAIL EATER BITS

20% OFF

CLAMPMETER AC/DC

STAINLESS STEEL WIRE STRIPPER

Reg. $280.99

$239

Reg. $26.99

$19.99

20V/12V MAX Black Heated Hoodie(Hoodie and Adaptor Only)

20V/12V MAX Grey Heated Hoodie(Hoodie and Adaptor Only)

40V MAX XR Brushless 15” String Trimmer Kit(6.0 Ah)

20V MAX XR Brushless 13” String Trimmer Kit(5.0 Ah)

40V MAX 22” Hedge Trimmer Kit- (4.0 Ah)

20V MAX XR Brushless Blower Kit- (5.0 Ah)

20V/12V MAX Lithium Ion Soft Shell Heated Jacket Kit

REG$249

REG$399

REG$329

REG$249

$199 $199

40V MAX XR Brushless Blower Kit- (4.0 Ah)

REG$329

REG$329

REG$239

REG$239

$229 $279 $229

$269

OUTDOOR TOOLS

$49.99REG: $59.99

$375REG: $399

Quick Drive #8X1 3/4” Yellow Zinc Wood Screws-2000 pcs / box

Quick Drive Complete Contractor System-1-3” screws, DeWalt motor

$10.99 $12.99

UNIVERSAL BOND SEAL- the ultimate MS Polymer adhesive sealant -bonds, seals and mounts, even underwater; has a high tensile strength of 27kg / sq cm-UV & weather resistant; impedes fungal & bacterial growth-odourless and can be painted-cures without shrinking, resists vibrations and remains flexible- comes in 8 different colours

INSTANT GRAB ADHESIVE-instant grab MS Polymer adhesive-developed for high strength initial bond-fixes large panels and heavy objects without support or mechanical fixings-has high tensile strength and cures without shrinking, resists vibrations and remains flexible-available in grey or white.

SAVE $200

BONUS FREE

GLOVES

BONUS FREE

GLOVES

BONUS FREE

GLOVES

30% OFF

WEDGE-BOLT® +Screw anchor- from 1/4 to 3/4” diameter up to 10” long in stock

TAPPER+ CONCRETE SCREWBoxes of 100 or 1000- 3/16” & 1/4” diameter up to 4” long in stock

SS WEDGEBOLT- 1/4”, 3/8’ & 1/2” diameter, up to 6” long in stock

TRIGGERFOAM WINDOW & DOOR FOAM

POWER-STUD+® SD2*Wedge Expansion Anchor- from 1/4 to 7/8” diameter up to 10” long in stock

AC100+ GOLD®Vinylester Injection Adhesive Anchoring System

$12.99

$17.99

OF POWERS PRODUCT & RECEIVE

OF POWERS PRODUCT & RECEIVE

OF POWERS PRODUCT & RECEIVE

BUY $250

BUY $500

BUY $1000

A FREE DEWALT TOUGH BOX

A FREE DEWALT RECIP SAW

A FREE DEWALT 1” SDS ROTARY HAMMER

$20 VALUE$60 VALUE

$379 VALUE HAVE ENGINEERED SPECS TO MEET?Talk to Powers at the booth and find out how Powers

Fasteners can save you money!

Ask us for a quote for your next project

Segmented Diamond Blade5” - $35.99 $17.997” - $49.99 $24.99

14” x .125” x 1” Dry Cutting Concrete Diamond BladeFor concrete, paving stones, block 14” - $179 $8912” - $149 $74

14” Diamond Segmented Cutting Wheel14” - $199 $99

4-1/2” x 5/8”-11 Turbo Segmented Cup WheelFor concrete, paving stones, block 4-1/2” - $69.99 $34.995” - $99 $49.507” - $149 $74.50

Double Row Cup Concrete Diamond Grinding Wheel5” - $99 $497” - $129 $64

10” Diamond Tile Saw Wheel10” - $53 $26

4 ½” Segmented Diamond Blade4-1/2” - $24.99 $12.49

14” General Purpose Diamond Wheel14” - $59 $29

14 X 20mm Multi EX Carbide Segmented BladeCuts almost anything, rip thru all types of building materials quickly14” - $269 $134

7” Segmented Diamond Blade7” - $49 $24.50

50%OFF

50%OFF

50% OFF ABMAST DIAMOND WHEELS

BUY 2 CASESGET 1 FREE!

Reg. $349

$319

Reg. $1999

$1899

Reg. $529

$449

Reg. $1299

$1199

Reg. $1199

$1099 Reg. $1399

$1299

“THE BULL” 2HP HAND CARRY AIR COMPRESSOR4.3 gallon tank, 4.1 CFM@90PSI, Oil lubricated

5.5HP WHEELED GAS COMPRESSOR- 9.3 CFM@90PSI, Oil lubricated, 9 gallon tank

6.5HP WHEELED GAS COMPRESSOR- 13.8 CFM@90PSI, Oil lubricated, 9 gallon tank

JOBSITECOMPRESSOR- 6.5 CFM@90PSI, Oil lubricated, 5.3 gallon tank

5HP 60 GAL SINGLE-STAGE STATIONARY COMPRESSOR- 5HP 16 CFM@100PSI, three cast iron cylinders, splash oil lubricated9HP TWO-WHEELED

GAS COMPRESSOR20.1 CFM @ 90PSI, Two stage pump, 9 gallon tank

Reg. $329

$289

1 HP OIL-FREE HAND CARRY COMPRESSORSuper-quiet. Only 60 db2.3 CFM @ 90 PSI

HEAVY DUTY ALUMINUM SAWHORSE

6900 SERIESFIBERGLASSSTEP LADDER

JLT ALUMINUM COMBINATION LADDERSSTILL THE STRONGEST, BEST BUILT MULTI-POSITION LADDER SYSTEMJLT18 $379 $349JLT22 $429 $389JLT26 $479 $429

6903 - 3’ $89 $796904 - 4’ $99 $896906 - 6’ $109 $946908 - 8’ $139 $129

3702 -2’ $74.99 $643703 -3’ $94.99 $843704 -4’ $119.99 $99

24’ D-RUNG- $339 $29928’ D-RUNG- $399 $34932’ D-RUNG- $429 $38936’ D-RUNG- $529 $48940’ D-RUNG- $629 $579

20’ D-RUNG- $219 $19924’ D-RUNG- $249 $22928’ D-RUNG- $289 $25932’ D-RUNG- $319 $27936’ D-RUNG- $399 $36940’ D-RUNG- $499 $449

4200 SERIES EXTRA HEAVY DUTY BOX BEAM ALUMINUM EXTENSION LADDER

3200 SERIESEXTRA HEAVY DUTY I-BEAM ALUMINUM EXTENSION LADDER

• No bearings or drawer slides to wear out or fail• Dirt & dust won’t affect the hinge plus it won’t bind even when loaded• Flat drawer bottoms, never worry about something catching or jamming on drawer above• Truly built to last, the patented Swivel Drawer Hinge strength, durability and low resistance is based on fully welded heavy gauge steel that swivels on a solid 1” cold rolled steel shaft with a grease fitting in each drawer• Secure tamper-proof locking systems• Durable powder-coat paint finish• Manufactured in North America

IT’S BETTER TO SWIVEL THAN SLIDE

5” PS33 SANDING DISCS-PSA or Hook & Loop

45%OFF10%

OFF

CAR REAMERSStandard Flute, three flats on shank; 3/8” - 1-1/4” - Specifically designed for the reaming of structural steel plates

ALL ANNULAR CUTTERS- From 7/16 - 2” in 16th Increments- 1” and 2” depth in stock

MAGNUM SUPER PREMIUM 135° SPLIT POINT- From 1/16 - 1/2” - 135°

29PC MAGNUM SUPER PREMIUM JOBBER DRILL SET- From 1/16 - 1/2”

MAGNUM SUPER PREMIUM 8PC SET- 9/16” - 1”

20%OFF

10%OFF

10%OFF

Reg. $114.99

$94

Reg. $289$239MAGNUM SUPER PREMIUM- 17/64 - 1-1/2 - With 1/2” Shank

SANDING BELTS-40-150 Grit

3” x 21” $2.24/ea3” x 24” $2.24/ea4” x 24” $2.46/ea

SALE $29/box of 100 REG $53/box of 100

25%OFF

MP360SDPROMAX PUNCH™ 360 12T HYDRAULIC PUNCH w/ STAINLESS STEEL CUTTING DIES

• A lightweight hydraulic knockout tool that can easily operate in most tight spaces

• Lightweight aluminum head• Powerful 12 ton compact drive• Complete set of stainless steel

cutting dies – 1/2” to 2”

MB1000BENDstation™ PRO• Unique dual bending shoe,

designed for both 3/4” & 1” EMT• Stores tools and up to 900’ of conduit• Integrated 60” Ruler

• Ratchet makes bending easier with a protractor for accuracy• Built in vice holds conduit in place

BUY BUY

MP03PROSTAINLESS STEEL LARGE DIE SET (2½”- 4”)

2729-21M18™ FUEL™ DEEP CUT BAND SAW KIT

BUY A MP360SD ($1019) MAX PUNCH™ 360 12T HYDRAULIC PUNCH WITH MILD STEEL CUTTING DIES AND GET A FREE* MP03 MILD STEEL LARGE DIE SET (2½”- 4”), A $655.50 MSRP RETAIL VALUE.

and get a

FREE!*

and get a

FREE!*

These offers are only valid for orders placed between September 10, 2015 and November 10, 2015. *Free promotional items are subject to availability and limited quantities. Should demand exceed availability, distribution will be based on date of order. This offer is only valid at Millbank Country Hardware. Please see representative for details. © 2015 Southwire Company, LLC. All Rights Reserved. ® Registered Trademark and ™ Trademark of Southwire Company, LLC.

1-800-668-0303SOUTHWIRETOOLS.CA

OR

$1349 $2799

$1,207.50MSRP RETAIL

VALUE!

$549.00MSRP RETAIL

VALUE!

Bonus 3 Ton Vehicle

Stands

Heavy Duty Bottle Jack- Can be used in vertical and horizontal positions (valve side down)

JET Hydraulic Bottle Jack - Super Heavy Duty- All models work in upright, angle or horizontal positions- Unique valving allows handle to remain in upright position when used horizontally for improved operation- Also available in Low Profile Models(valve side down)

L-90 Series Chain Hoist- Class V+ load chain is the world’s strongest grade

5’ Lever Chain Hoist- Class V+ load chain is the world’s strongest grade

2-1/2 Ton Service Jack- 5” -19-1/4” height capacity

* while quantities last

2 ton $29.994 ton $42.996 ton $47.99

2 ton $49.993 ton $62.995 ton $76.998 ton $92.9912-1/2 ton $123.9922-1/2 ton $195.9935 ton $339.9960 ton $899.00

½ ton 10 ft $319½ ton 20 ft $4491 ton 10 ft $3691 ton 20 ft $5092 ton 10 ft $6392 ton 20 ft $7993 ton 10 ft $8793 ton 20 ft $1099

½ ton $329¾ ton $3791½ ton $4393 ton $739

$199REG: $239

PREMIUM FULL BODY HARNESS5 points of adjustment; Large forged D-Ring makes for easy lanyard connection;

FULL BODY COMPLIANCE HARNESS3 points of adjustment Single D RingQuick donning buckles

Reg. $49.99$34.99Reg. $169$139

VERTICAL LIFELINE25’ $49.99 $44.9950’ $79.99 $59.99100’ $109.00 $94.00

Reg. $199$169PEAKPRO ROOFER’S KITIncludes harness, ADP rope grab w/lanyard, reusable roof bracket and 50’ lifeline

Reg. $145

$119

SHOCK ABSORBING LANYARD- with 2’ Rope Grab

25%OFF

ALL PIONEER SAFETY WEAR

HI-VIZ MICRO MESH T-SHIRT

HI -VIZ TRAFFIC VEST

ATV ALL-TERRAIN VISE- fits in 2” receiver hitch* while qtys last

6 1/2” UTILITY WORKSHOP VISE - includes free 4lb 12” Bash hammer* while qtys last

DRILL PRESS VISE RAPID ACTING NUT

8 LB HEAD, 36” B.A.S.H SLEDGE HAMMER

Reg. $249

$199Reg. $199

$169Reg. $369

$329Reg. $129.99

$109

UNBREAKABLE HANDLE!

12” EZS CLAMPS

12” CLASSIX™ CLAMP

12” CLASSIC– HEAVY DUTY PAD

24” K-BODY REVO FIXED JAW PARALLEL CLAMP

12” BAR CLAMP 12” X 5½” BAR CLAMP

OFFSET SNIPS 3/4” H-STYLE PIPE CLAMP

Reg. $24.99

$21Reg. $34.99

$28.99Reg. $69.99

$54.99Reg. $69.99

$49.99

Reg. $89

$79Reg. $43.99

$37.99Reg. $37.99

$29.99Reg. $18.99

$13.99

FEIN MAG DRILL- 2 speed variable speed with reverse- Up to 2” drilling or 5/8” tapping

DUST EXTRACTOR- with tool set

Reg. $1999$1899 Reg. $499$449FEIN MULTIMASTER TOP SET

Reg. $429$349

10” 60 TOOTH FINE FINISH SLIDE MITRE BLADE

6 1/2” 18 TOOTH CIRC. SAW BLADE

10” 80T MELAMINE BLADE

7 1/4” FAST FRAMING CIRC. SAW BLADES

Reg. $49.99

$39Reg. $11.49

$8.99Reg. $79.99

$64.99Reg. $11.99

$7.99

2PC COBRA PLIERS SET

10” PLIERS WRENCH

10” COBRA WATER PUMP PLIERS

12” COBRA WATER PUMP PLIERS

Reg. $84.99

$67.99Reg. $70.99

$56.99

Reg. $46.99

$37.59Reg. $65.99

$52.99

GERMAN BUILT LIFETIME WARRANTY

20% OFF ALL WOODMAXX SCREWS

FLAT HEAD WOOD SCREWS, ROUND WASHER HEAD POCKET HOLE SCEWS, (FINE AND COARSE THREAD)

JARS AND PAILS IN STOCK. CALL FOR PRICING

FEIN MULTI-MASTER BLADES

20% OFF

MAIL IN REBATE

FOR 2 FREE GRINDERS

CONVOY SUPER CAULK GUNReg. $25.99

$18.99

TAJIMA SNAP-LINE DYE SEMI-PERMANENT SNAP-LINE CHALK32ozRed or Black

Reg. $19.99

$14.99

CHALK SNAP LINEAvailable in Red or White

Reg. $34.99

$29

10” MAGNETIC TORPEDO LEVEL

6-10’ PLATE TO PLATE LEVEL

JAMMER SET- includes 78” & 32” levels

48” TECH LEVEL- digitally displays degrees, %, feet/inches and mm/m

DISTANCE MEASURER- with tripod- 660’ range

19 POCKET FRAMER’S COMBO APRON

11” ELECTRICAL & MAINTENANCE TOOL CARRIER W PARTS TRAYReg. $159

Reg. $99

$134

$79

Reg. $139

$99

11 POCKET DELUXE LEATHER CONTRACTOR APRON

HEAVY DUTY FRAMER’S COMFORTLIFT SYSTEM

Reg. $59$49

27 POCKET - CLC PROFRAMERS COMBO SYSTEM

Reg. $169$134 Reg. $89.99$74

31 POCKET CARPENTERS APRON

$26.99REG: $34.99

$269REG: $319

$199REG: $249

$239REG: $279

$489REG: $549

50% OFF

CROSSLINE LASER

3-PC PRO LEVEL SETincludes torpedo, 24” & 48” levelReg. $129

2-PC PREMIUM LEVEL SET16” and 48” level w/ hand holds Reg. $129

48” R-BEAM LEVEL- includes free case 48” Reg. $129

48” MASONS LEVEL48” Reg. $129

LD320 DISTANCE MEASURER 130’ range Reg. $139 48” MAGNETIC

LEVEL W/ HAND HOLDSReg. $129

$99each

YOUR CHOICE!

STABILA LEVELS

TOPRING EASYFLEX AIR HOSE- Extrememly flexible to -40°- 35% lighter than rubber hose

EXTENSION CORD- Heavy-duty Type SJTW cords, 0 degree cold weather jacket, Water and ame resistant

14/3- 50’-14/3- 100’-12/3- 50’-12/3- 100’-10/3- 50’-10/3- 100’-

Reg Sale

$35.99$64.99$54.99$89.99$99.99

$159.00

$31.99$57.99$44.99$79.99$89.00

$139.001/4” x 50’ $39.99 $32.991/4” x 100’ $67.99 $54.99

3/8” x 50’ $145.99 $38.993/8” x 100’ $79.99 $64.99

$149REG: $299

DISTANCE MEASURER- with tripod- 660’ range

Pump Controller1 Zone $119.99 $1093 Zone $214.00 $1895 Zone $316.00 $279

Predesigned and Fabricated Boiler Boards – call for Options and Pricing

Cast Iron Pump15 GPM $109 $9525 GPM $249 $225

Glycol Feeder•6 Gallon

$169REG: $189

1” Mixing Valve• Sweat or NPT

$569REG: $649

Boiler – propane or natural gas in stock

$3299REG: $3799

Glycol•20L Pail

$119REG: $149

Plate Heat Exchanger•4-1/2” x 11”•1” NPT x 30 plate

$239REG: $269

Heating Manifold3 Loop $242.00 $1994 Loop $275.00 $2296 Loop $349.00 $2698 Loop $425.00 $33910 Loop $899.00 $75912 Loop $999.00 $899

$199REG: $215Wall Mount Radiator• 26½ x 30” x 3½”

3-Row Radiator Coil17” x 20 $301 $26923” x 24” $393 $349

1/2” x 50’ $17.99

1/2” x 100’ $34.991/2” x 500’ $154.993/4” x 20’ $13.993/4” x 100’ $64.991” x 500’ $495.00

OXYGEN BARRIER PIPE1/2” x 300’ $961/2” x 600’ $1921/2” x 1000’ $320

1” PEX ALUMA PIPE 3.99/ft

Expansion Tank2 Gal $44.99 $39.994 Gal $59.99 $49.996 Gal $73.99 $64.99

Pex Pipe

Cut to Size Manifold Material- 1” main x ½” outlet- 72” long x 24 outlet

$179REG: $199

36” 175 WATT METAL HALIDE WORK LIGHT- 15000 lumens, 10000 hr lamp, 24-45ft light range

36” 400 WATT METAL HALIDE WORK LIGHT- 40000 lumens, 20000 hr lamp, 50-100ft light range

27” 85 WATT FLOURESCENT WORK LIGHT- 5000 lumens, 8000 hr lamp, 15-25ft light range

HANG-A-LIGHT400 WATT PULSE START METAL HALIDE- 42000 lumens, 20000 hr lamp, 50-100ft light range

Reg. $299 Reg. $349

Reg. $199 Reg. $189$284 $315

$179 $169

1 HP DUST COLLECTOR

17” DRILL PRESS 22” DRILL PRESS 14” WOOD CUTTING BANDSAW

10” - 2 HP CABINET SAWleft tilt

13” PLANER WITH HELICAL HEAD

15” PLANER3HP motor2 feed speeds (16 FPM, 20 FPM)

DELUXE ROUTER TABLE KIT32” x 24” cast iron tableabove the table adjustment mechanism for fast tool changes and precision bit setting

Reg. $589

$529

Reg. $659

$589Reg. $1159

$1039Reg. $699

$629Reg. $1499

$1349

Reg. $689

$619Reg. $2499

$2249Reg. $1499

$1349

8” PRO DADO SET

10” 40-TOOTH 30-DEGREE HI-ATB PREMIER FUSION THIN KERF BLADE

Reg. $149

$119

6 1/2” FRAMING BLADE

Reg. $18.99

$13.99

7 1/4” FRAMING BLADE

Reg. $15.99

$13.99

12” 48 TOOTH THIN KERF GENERAL PURPOSE SAW BLADE

Reg. $61.99

$48.99

14” 70 TOOTH ATBF COMBINATION SAW BLADE

Reg. $179

$149

10” 30T GLUE LINE RIP

Reg. $69.99

$49.99Reg. $69.99

$59.99

12” 72T FINE FINISH BLADE

Reg. $102.99

$84

10% OFF ALL GENERAL MACHINERY

ALL FREUD ROUTER BITS

20% OFF

JAMB SAW KIT

60 GALLON AIR COMPRESSOR11.2 CFM @ 90PSI,150 PSI Max

ULTRA-QUIET OIL-FREE AIR COMPRESSOR2.35 CFM @ 90PSI

12” X 18” VARIABLE SPEED WOOD LATHE

20” PLANER 10000W GASOLINE GENERATOR WITH ELECTRIC START & WHEEL KIT

15” PLANER WITH SPIRAL CUTTERHEAD

INDUSTRIAL SLIDING TABLE ATTACHMENT

17” WOOD BANDSAW WITH RESAW GUIDE

6” JOINTER16 GALLON WET/DRY VACUUM

14” WOOD BANDSAW WITH RESAW GUIDE

SINGLE SPINDLE ELECTRIC POCKET HOLE MACHINE

FOREMAN POCKET-HOLE MACHINE- accessory bundle includes quik bit, 2 driver bits, 1000 screws & screw selector wheel

REPLACEMENT STEP DRILL FOR MACHINE POCKET HOLE SYSTEMS

K5 KREG JIG PRECISION TRAK AND STOP KIT

Reg. $229

$205

Reg. $1599

$1439

Reg. $279

$249

Reg. $4099

$3899

$499Reg. $39.99

$32Reg. $174.99

$159

Reg. $149

$134

Reg. $799

$719

Reg. $2499

$2249

Reg. $549

$494

Reg. $749

$674

Reg. $999

$899

Reg. $659

$593

Reg. $2399

$2599

Reg. $599

$539

10% OFF ALL KING MACHINERY

FREEACCESSORY

BUNDLE

FREEORGANIZER

$199

30%OFF

ALLDEWALT & BOSTITCH

TOOLS

TRADE IN YOUR OLD TOOLS!BRING IN ANY OLD, BROKEN, OR WORN OUT TOOLS AND RECEIVE 30% OFF ANY NEW DEWALT TOOL!

Trade-in tools do not need to be complete and can be any brand. 30% discount (printed sale price) applies to your entire Dewalt purchase even if you purchase more tools than you trade in.

While every effort is made to avoid mistakes, we reserve the right to correct printing errors. While quantities last.

10” Job Site Table Saw with Rolling Stand- 32-1/2” Rip Capacity

10” Compound Mitre Saw

12” Compound Mitre Saw

10” Sliding Double Bevel Compound Mitre Saw

10” Wet Tile Saw with Stand

24” ripping capacity -18” tile on diagonal;3-1/8” depth of cut allows for cutting of V-cap and pavers

12” Sliding Double Bevel Compound Mitre Saw

$559REG: $799

$1189REG: $1699

$769REG: $1099

1” L-Shape SDS Rotary Hammer Kit- 8.0A

1” L-Shape SDS Rotary Hammer Kit w/ Quick Change Chuck- 8.0A

Pavement Breaker w/ Hammer Truck and Bits

1-3/4” SDS Max Combination Hammer Kit with SHOCKS

2” SDS Max Hammer with CTC

$489REG: $699

10 Gallon Wet/Dry HEPA Dust Extractor with Automatic Filter Cleaning

10” Compact Job Site Table Saw

13” Three Knife Two Speed Thickness Planer- with stand

$265REG: $379

$293REG: $419

$1399REG: $1999

$314REG: $449

$188REG: $269

$475REG: $679

30% OFFREG: $849

30% OFFREG: $799

30% OFFREG: $749

30% OFFREG: $479