Donghae Co., Ltd. has been specialized in manufacturing Knife gate valves since its foundation. With abundant experience and continuous efforts to develop the technology, we have introduced a leak-free water gate valve (soft seat and plate-type disc structure) that goes beyond the limits of knife gate valves that have been applied only for limited and special applications such as chips and powders.
Our patented technology, soft seat water gate valve has no leakage when shutting off(ANSI 150LB & 300LB(JIS 10K & 20K) applicable). It not only solves the persistent problem of the valve which has been applied to the existing waterworks, but also shows both performance and economical advantages as there is no foreign substances buildup on the bottom of the valve port and it has the bonnet structure not allowing leakage to the outside of the body.This soft seat knife gate valve is supplied to all fluid lines such as rectification line, gas line, marine shipbuilding, power plant as well as water supply and drainage line, and has been recognized for its quality. It is a valve with sufficient competitiveness as an alternative to gate valve, ball valve and butterfly valve, which are in high demand for valves.
Dong Hae Co., Ltd will do our best to develop technology and improve quality in order to give back to customers’ support.
We will come closer to our customers with advanced technology and quality.
REFERENCE LIST
DONGHAEDonghae Co., Ltd.
SAMSUNG HEAVY INDUSTRIES (DRILL SHIP) SOFT KNIFE GATE VLAVE 8" 10" 16" 18" 20" 2009HYUNDAI HEAVY INDUSTRIES(DRILL SHIP) SOFT SEAT KNIFE GATE VALVE 4" 6" 10" 12" 16" 18" 2011DSME(DRILL SHIP) SOFT KNIFE GATE VALVE 16" 18" 2012SAMSUNG HEAVY INDUSTRIES(#7117~21 #2097~8) SOFT SEAT KNIFE GATE VALVE 6" 8" 10" 14" 16" 18" 20" 2014SAMSUNG HEAVY IND.(2097 STENA SEMI-RIG #1) SOFT KNIFE GATE VALVE 6",14",16" 2015SAMSUNG HEAVY IND.(DRILL SHIP 7117~7118) SOFT KNIFE GATE VALVE & 3 WAY BALL VALVE 2015ALOHAN(ECOBA Environmental ) KNIFE GATE VALVE 150# 350A, 500A 2016HYUNDAI HEAVY IND.(DRILLING RIG SHIP NO. 2704) SOFT SEAT KNIFE GATE VALVE 150#-10" 2016TECOFI(ON-SHORE PLANT-MUD) SOFT SEAT KNIFE GATE VALVE 300#-3",4",6",8" 2016HYUNDAI HEAVY IND.(DRILLING RIG SHIP NO. 2228) SOFT SEAT KNIFE GATE VALVE 150#-10" 2016
HISTORY
2003. 02. Established the Donghae Valve Co.,Ltd.
2003. 05. Moved the Factory (#537, Sejae-Ri, Dasa-Up, Daelsung-Gun, Daegu,)
2005. 04. Registered as a Vendor of Doosan Co.,Ltd Heavy Industry.
Utility model patented 2-WAY, 3-WAY BALL V/V Metal seat
05. Obtained ISO 9001 (DAS : DKQ-5902)
2007. 01. Improved K/GATE V/V SEAT structure (Registered patent)
2008. 05. Obtained API Q1
2009. 06. Registered sub-vendor for SAMSUNG HEAVY INDUSTRIES (SHIP-BUILDING )
2011. 08. Registered sub-vendor for DSME (SHIP-BUILDING )
12. Registered sub-vender for HYUNDAI HEAVY INDUSTRIES (SHIP-BUILDING)
2012. 02. Building the present factory 350-11, Habinnam-ro, Bongchon-ri, Habin-myeon, Dalseong-gun, Daegu, Republic of Korea
2012. 12. Changing the company name (DONGHAE Co,. Ltd.)
2013. 08. Obtained ISO 9001 (GK-1019-QC)
Obtained Certificate of conformity with the following European Directives (K5882/M13)
2014. 04. Registered Innovation Business Company (INNO-BIZ)
Registered as a Vendor of MHPS Korea (Mitsubisi Hitachi Power system Korea, Ltd.)
2015. 10. Acquired environmental management system certification(Korea Productivity Center Quality Assurance)
Acquired safety and health management system certification(Korea Productivity Center Quality Assurance)
Patent obtained SOFT SEAT KNIFE GATE VALVE
2016. 01. Acquired hygiene safety standard certification(KC Certification - Water Gate Valve, Korea Waterworks Association)
08. Certified as a qualified maintenance company in five domestic power companies
Recommended for priority purchase of superior invention(Korea Invention Promotion Association)
2017. 02. Water Knife Gate Valve Conformity Certification by Waterworks Association
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
SOFT SEAT KNIFE GATE VALVE
• It satisfies domestic and overseas standard requirements ; * KWWA-CP-2017-001 Confirmity Product Certificate of Knife Gate Valve for Water Supply * Water Valve Compliance Criteria * SPS-KWWA B 102-0709 Standard for Water Soft Seal Sluice Valve * SPS-KVIC 1103-1093 Stainless Steel Sluice Valve * KS B 2332 Sluice Valve Standard * KS B 2334 Ductile Cast Iron Sluice Valve Standard * MSS SP-135 High Pressure Knife Gate Valve Standard
• Zero Leakage even at high pressure with double sealing of soft seat and metal seat• Applies to all fluid lines including pure water, a mixture of sludge and water • Leakage protection is possible at all times as there is no foreign substances buildup on the bottom of the valve port.• Price is competitive as material requirements are low with narrow interfacial structure, and it is easy to install even in a narrow space. Reduced packaging and shipping costs due to its light weight.• Advantageous in cost reduction as it is possible to operate with a small driving force, so that a smaller specification actuator can be applied.• Reduced repair costs as valve seat, soft seat, can be removed and attached.• When the valve is closed, the disc first touches the soft seat and then contacts the metal seat. So lifespan of valve is expended preventing wear of the disc and soft seat. • Essential valve for water supply and drainage line because there is no leakage to outside of valve and it is advantageous to make clean environment.
Valve Structure
Features
04
No leakage
Packing
Gland
Bonnet
Bonnetless type Bonnet type Bonnet+Packing+Gland type
- Applicable for the fluid with
viscosity or large particle.
- Applicable for the line with less
frequent operation.
- Restrictively applicable for water
or oil.
- Applicable for the pure liquid or
gas fluid (water, oil and gas).
- Applicable for the line with frequent
operation or for the special line
with restriction of outside leakage.
- Applicable for the all fluid control.
- Applicable for the line with frequent
operation or for the special line with
restriction of outside leakage.
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
Driving System
Seat Structure
•Block water leak even at high pressure with double sealing of soft seat and
metal seat, when pressure is applied to the valve
•Designed to avoid foreign substances buildup on the bottom of valve.
Hand Wheel type Chain wheel type Gear box type Pneumatic cylinder type Motor type(MOV)
DONGHAE Co., Ltd.
05
O-ring Soft seat
Soft seat
(Rubber seat)
Patented product
Top of body (1:1) Bottom of body (1:1)
Bottom of body
Top of body
Disc Body
First sealing
Second sealing
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
06
DEAL DRAWING - RISING STEM TYPE
No leakage
No. Part name No. Part name
1 Body 14 Hand Wheel
2 Bonnet 15 Gasket
3 Disc 16 Packing
4 Soft Seat 17 O-Ring
5 Cover 18 Bonnet V-Packing
6 Gland 19 Bearing
7 Stem 20 Bonnet Gland Ring
8 Yoke Plate 21 Bonnet Stud Bolt
9 Handle Plate 22 Stem Bolt & Spring Washer
10 Bonnet Gland 23 Yoke Plate Bolt & Spring Washer
11 Yoke Sleeve 24 Handle Plate Bolt & Spring Washer
12 Clamp 25 Bonnet Gland Bolt & Spring Washer
13 Rod Nut 26 Bonnet Gland Ring Bolt & Spring Washer
Part List
4
17
1
5
1615
3
6
12 22
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
07
DONGHAE Co., Ltd.
Body Material
ITEM ASTM JIS
Body, Bonnet
Cast SteelA216-WCAA216-WCBA216-WCC
SCPH2
Cast Iron A536 FCD450FC200
Cast Stainless Steel
A351-CF8A351-CF8MA351-CF3
A351-CF3MA351-CK20
SCS 13ASCS 14ASCS 19ASCS 16A
Stem
A479-304A479-304LA479-316
A479-316L
SUS 304SUS 304LSUS 316
SUS 316L
Disc
A240-304A240-304LA240-316
A240-316L
SUS 304SUS 304LSUS 316
SUS 316L
Soft Seat Material Physical Properties
Property NBR EPDM VITON Polyurethane
TENSILE Strength (kg/cm²) 50~250 500~200 225 400±0
Elongation(%) 100~500 100~500 425 600±0
Max Temp(℃) 140 140 200 120
Min Temp(℃) -25 -40 -10 -65
Abrasion Resistance Excellent Fair Good Excellent
2510
20
18
23
14
2
8 9
7
26
11
19
13
21
24
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
08
1
16
3
10
4
11
5
8
DEAL DRAWING - NON RISING STEM TYPE
No leakage
Part List
No. Part name No. Part name
1 Body 10 Gasket
2 Bonnet 11 O-Ring
3 Disc 12 Bonnet V-Packing
4 Soft Seat 13 Stem Packing
5 Cover 14 Bonnet Packing
6 Stem 15 Bonnet Stud Bolt & Spring Washer
7 Bonnet Gland 16 Clamp Pin
8 Clamp 17 Bonnet Gland Bolt & Spring Washer
9 Cap 18 Cap Bolt
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
09
DONGHAE Co., Ltd.
6
17 18
15
712
9
132
14
Soft Seat Material Physical Properties
Property NBR EPDM VITON Polyurethane
TENSILE Strength (kg/cm²) 50~250 500~200 225 400±0
Elongation(%) 100~500 100~500 425 600±0
Max Temp(℃) 140 140 200 120
Min Temp(℃) -25 -40 -10 -65
Abrasion Resistance Excellent Fair Good Excellent
Body Material
ITEM ASTM JIS
Body, Bonnet
Cast SteelA216-WCAA216-WCBA216-WCC
SCPH2
Cast Iron A536 FCD450FC200
Cast Stainless Steel
A351-CF8A351-CF8MA351-CF3
A351-CF3MA351-CK20
SCS 13ASCS 14ASCS 19ASCS 16A
Stem
A479-304A479-304LA479-316
A479-316L
SUS 304SUS 304LSUS 316
SUS 316L
Disc
A240-304A240-304LA240-316
A240-316L
SUS 304SUS 304LSUS 316
SUS 316L
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
10
Rising Stem Type
No leakage
Hand Wheel typeHeight(H)
Handle diam(W)
WeightL1 L2 L3
50A 498 Ø200 16 23 2980A 602 Ø200 24 31 38100A 704 Ø200 36 44 51125A 810 Ø280 45 53 59150A 915 Ø280 62 70 73200A 1121 Ø280 79 87 93250A 1355 Ø355 106 114 121300A 1689 Ø400 167 175 182350A 1739 Ø400 196 205 211400A 1995 Ø450 233 241 249450A 2209 Ø450 302 310 318500A 2393 Ø500 385 393 402600A 2936 Ø500 476 486 492650A 3091 Ø500 508 518 525700A 3244 Ø500 521 531 537750A 3324 Ø500 552 562 575800A 3404 Ø500 583 595 605900A 3561 Ø500 612 625 635
Gear box typeHeight(H)
WeightL1 L2 L3
50A 575 18 28 3380A 689 26 36 40100A 817 38 46 53125A 892 49 57 63150A 1056 69 77 80200A 1225 89 97 103250A 1419 116 124 131300A 1650 179 187 194350A 1824 205 214 220400A 2130 253 261 259450A 2178 327 336 343500A 2447 410 408 417600A 2755 501 511 517650A 2925 528 538 545700A 3105 547 557 563750A 3193 575 585 598800A 3280 602 614 624900A 3543 637 650 660
Pneumatic cylinder typeHeight(H)
WeightL1 L2 L3
50A 608 24 31 3780A 712 32 39 46100A 847 43 51 58125A 925 54 62 68150A 1061 76 91 94200A 1285 95 103 109250A 1437 126 134 141300A 1854 168 176 183350A 1968 206 215 221400A 2238 276 284 292450A 2473 338 346 354500A 2703 403 411 420600A 3259 498 508 514650A 3403 549 559 566700A 3714 596 605 612750A 3805 617 627 640800A 3896 637 649 659900A 4215 675 688 698
Motor Driving TypeHeight(H)
WeightL1 L2 L3
50A 568 29 36 4280A 662 37 44 51100A 807 49 57 64125A 885 54 62 68150A 1018 81 96 99200A 1200 102 110 116250A 1487 136 144 151300A 1903 177 185 192350A 2018 215 224 230400A 2309 288 296 304450A 2629 353 361 369500A 2799 415 423 432600A 3349 521 531 537650A 3493 563 573 580700A 3804 612 621 628750A 3896 633 643 653800A 3985 653 665 675900A 4303 752 765 775
Face to Face Dimension(As per KWWA-CP-2017-001, MSS SP-135, ASME B16.10)
Item Valve Size Pressure Rating
2”(50A)
3”(80A)
4”(100A)
5”(125A)
6”(150A)
8”(200A)
10”(250A)
12”(300A)
Short Face to Face L1 (mm)
150LB�10K�PN10 51 51 51 57 70 70 70 76300LB�20K�PN25 70 70 70 80 80 89 119 127
Middle Face to Face L2 (mm)
150LB�10K�PN10 134 140 140 154 164 164 180 180300LB�20K�PN25 150 165 180 194 210 220 245 260
Wide Face to FaceL3 (mm)
150LB�10K�PN10 178 203 229 254 267 292 330 356300LB�20K�PN25 216 283 305 381 403 419 457 502
Torque (N.m)150LB�10K�PN10 20 20 25 28 36 36 40 45300LB�20K�PN25 22 22 30 40 50 66 78 90
L L L L
W
H H H H
L1 : Short Face to Face, L2 : Middle Face to Face, L3 : Wide Face to Face
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
H H
L L
11
DONGHAE Co., Ltd.
No leakage
Non Rising Stem Type
Cap typeHeight(H)
WeightL1 L2 L3
50A 285 16 23 2980A 367 24 31 38100A 430 36 44 51125A 485 45 53 59150A 542 62 70 73200A 668 79 87 93250A 781 106 114 121300A 877 167 175 182350A 980 196 205 211400A 1130 233 241 249450A 1215 302 310 318500A 1335 385 393 402600A 1558 476 486 492650A 1632 508 518 525700A 1726 521 531 537750A 1778 552 562 575800A 1829 583 595 605900A 1965 632 625 635
Motor Driving TypeHeight(H)
WeightL1 L2 L3
50A 456 27 34 4080A 550 33 42 49100A 605 45 57 64125A 666 51 59 65150A 770 78 93 96200A 769 99 107 113250A 992 132 141 148300A 1310 172 180 187350A 1413 210 219 225400A 1589 275 286 391450A 1674 332 340 348500A 1794 398 410 419600A 2017 492 502 508650A 2091 539 573 580700A 2185 578 587 594750A 2237 607 617 627800A 2288 615 627 637900A 2424 712 725 735
Type of Face to Face (L)
L1Short Face to Face
L2Middle Face to Face
L3Wide Face to Face
Face to Face Dimension(As per KWWA-CP-2017-001, MSS SP-135, ASME B16.10)
Item Valve Size Pressure Rating
14”(350A)
16”(400A)
18”(450A)
20”(500A)
24”(600A)
28”(700A)
30”(800A)
36”(900A)
Short Face to Face L1 (mm)
150LB�10K�PN10 76 89 89 114 114 181 206 226300LB�20K�PN25 140 140 159 189 216 254 292 305
Middle Face to Face L2 (mm)
150LB�10K�PN10 198 232 240 252 286 324 356 356300LB�20K�PN25 285 338 350 380 430 510 570 570
Wide Face to FaceL3 (mm)
150LB�10K�PN10 381 406 432 457 508 610 711 813300LB�20K�PN25 762 838 914 991 1143 1346 1524 1727
Torque (N.m)150LB�10K�PN10 50 55 60 71 80 91 104 116300LB�20K�PN25 110 130 150 170 190 230 270 310
L1 : Short Face to Face, L2 : Middle Face to Face, L3 : Wide Face to Face L1 : Short Face to Face, L2 : Middle Face to Face, L3 : Wide Face to Face
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
12
DH-SKB-NR F RU M-10-200-S
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
① Valve Structure
② Stem Type
③ End Connection Type
④ Soft Seat Material
⑤ Driving Type
⑥ Pressure Rating
⑦ Valve Size
⑧ Body Material
Symbol DescriptionsModel No.
SKB SKBG
① Valve Structure
Bonnet Type O
Bonnet + Packing + Gland Type O
② Stem Type
R Rising Stem Type O
NR Non-Rising Stem Type O
③ End Connection Type
F Flange O O
L Lug O O
W Wafer O O
④ Soft Seat Material
RE EPDM O O
RN NBR O O
RV VITON O O
RU POLYURETHANE O O
⑤ Driving Type
H Manual O O
C Pneumatic Cylinder O O
G Gear O O
M Motor Driving O O
⑥ Pressure Rating
10 JIS10K O O
150 ANSI150LB O O
P10 DIN PN 10 Bar O O
20 JIS20K O O
300 ANSI300LB O O
P16 DIN PN 16 Bar O O
P25 DIN PN 25 Bar O O
⑦ Valve Size
50 50mm O O
80 80mm O O
100 100mm O O
125 125mm O O
150 150mm O O
200 200mm O O
250 250mm O O
300 300mm O O
350 350mm O O
400 400mm O O
450 450mm O O
500 500mm O O
600 600mm O O
700 700mm O O
800 800mm O O
900 900mm O O
⑧ Body Material
S Cast Stainless Steel O O
G Cast Iron, Cast Steel O O
[ Example Explanation ]
① Model : Soft Seat Knife Gate Valve Bonnet
+ Packing in Gland
② Stem Type : Rising Stem Type
③ End Connection Type : Flange Type
④ Rubber Seat Material : EPDM
⑤ Driving Type : Motor
⑥ Pressure Rating : JIS 10K
⑦ Valve Size : 200mm
⑧ Body Material : Cast Stainless Steel
MODEL SELECTION
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
13
DONGHAE Co., Ltd.
FLANGE DIMENSION
ANSI B 16.5 CLASS 150LB & 300LB
Size
Flange Item
Pressure rating
IN Dia.
d (mm)
Out Dia.
D (mm)
RF Dia.
g (mm)
Thickness
T (mm)
RF Thickness
f (mm)
PCD
C (mm)
Tap (h) Hole No.
(n) Hole Length (mm)
Tap Caliber (inch)
2"150LB 51 152 92 19.1 1.6 120.5 19 5/8 4300LB 51 165 92 22.3 1.6 127 19 5/8 8
3"150LB 76 190 127 23.9 1.6 152.5 19 5/8 4300LB 76 210 127 28.6 1.6 168 22 3/4 8
4"150LB 102 229 157 23.9 1.6 190.5 19 5/8 8300LB 102 254 157 31.8 1.6 200 22 3/4 8
5"150LB 127 254 186 23.9 1.6 216 22 3/4 8300LB 127 279 186 35 1.6 235 22 3/4 8
6"150LB 152 279 216 25.4 1.6 241.5 22 3/4 8300LB 152 318 216 36.6 1.6 270 22 3/4 12
8"150LB 203 343 270 28.6 1.6 298.5 22 3/4 8300LB 203 381 270 41.3 1.6 330 25 7/8 12
10"150LB 254 406 324 30.2 1.6 362 25 7/8 12300LB 254 444 324 47.7 1.6 387 29 1 16
12"150LB 305 483 381 31.8 1.6 432 25 7/8 12300LB 305 521 381 50.8 1.6 451 32 1 1/8 16
14"150LB 337 533 413 35 1.6 476 29 1 12300LB 337 584 413 54 1.6 514.5 32 1 1/8 20
16"150LB 387 597 470 36.6 1.6 539.5 29 1 16300LB 387 648 470 57.2 1.6 571.5 35 1 1/4 20
18"150LB 438 635 533 39.7 1.6 578 32 1 1/8 16300LB 432 711 533 60.4 1.6 628.5 35 1 1/4 24
20"150LB 489 698 584 42.9 1.6 635 32 1 1/8 20300LB 483 775 584 63.5 1.6 686 35 1 1/4 24
24"150LB 591 813 692 47.5 1.6 749.3 35 1 1/4 20300LB 584 914 692 70 1.6 813 41 1 1/2 24
26"150LB 625 870 749 68.3 1.6 806.4 35 1 1/4 24300LB 635 970 749 79.4 1.6 876.3 44.5 1 5/8 28
28"150LB 692 927 800 71.3 1.6 863.4 35 1 1/4 28300LB 673 1035 800 85.8 1.6 939.8 44.5 1 5/8 28
30"150LB 743 985 857 71.5 1.6 914.4 35 1 1/4 28300LB 724 1090 857 92 1.6 997 47.75 1 3/4 28
32"150LB 787 1060 914.5 81 1.6 978 41 1 1/2 28300LB 775 1150 914 98.5 1.6 1054.1 50.8 1 7/8 28
36"150LB 889 1170 1022 90.5 1.6 1086 41 1 1/2 32300LB 889 1270 1022 104.8 1.6 1168.4 53.84 1 1/2 32
n-h
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
FLANGE DIMENSION
14
n-h
JIS B 2210 CLASS 10kgf/cm2 & 20kgf/cm2
Size
Flange Item
Pressure rating
IN Dia.
d (mm)
Out Dia.
D (mm)
RF Dia.
g (mm)
Thickness
T (mm)
RF Thickness
f (mm)
PCD
C (mm)
Tap (h) Hole No.
(n) Hole Length (mm)
Tap Caliber (mm)
50A10kgf/㎠ 50 155 96 16 2 120 19 M16 420kgf/㎠ 50 155 96 18 2 120 19 M16 8
80A10kgf/㎠ 80 185 126 18 2 150 19 M16 420kgf/㎠ 80 200 132 22 2 160 23 M20 8
100A10kgf/㎠ 100 210 151 18 2 175 19 M16 820kgf/㎠ 100 225 160 24 2 185 23 M20 8
125A10kgf/㎠ 125 250 182 20 2 210 23 M20 820kgf/㎠ 125 270 195 26 2 225 25 M22 8
150A10kgf/㎠ 150 280 212 22 2 240 23 M20 820kgf/㎠ 150 305 230 28 2 260 25 M22 12
200A10kgf/㎠ 200 330 262 22 2 290 23 M20 1220kgf/㎠ 200 350 275 30 2 305 25 M22 12
250A10kgf/㎠ 250 400 324 24 2 355 25 M22 1220kgf/㎠ 250 430 345 34 2 380 27 M22 12
300A10kgf/㎠ 300 445 368 24 3 400 25 M22 1620kgf/㎠ 300 480 395 36 3 430 27 M24 16
350A10kgf/㎠ 340 490 413 26 3 445 25 M22 1620kgf/㎠ 335 540 440 40 3 480 33 M30 16
400A10kgf/㎠ 400 560 475 28 3 510 27 M24 1620kgf/㎠ 380 605 495 46 3 540 33 M30 16
450A10kgf/㎠ 450 620 530 30 3 565 27 M24 1820kgf/㎠ 430 675 560 48 3 605 33 M30 20
500A10kgf/㎠ 500 675 585 35 3 620 27 M24 2020kgf/㎠ 480 730 615 50 3 660 33 M30 20
600A10kgf/㎠ 600 795 690 40 3 730 33 M30 2420kgf/㎠ 580 845 720 54 3 770 39 M36 24
650A10kgf/㎠ 650 850 745 55 3 795 33 M30 2420kgf/㎠ 630 935 770 59 3 850 42.5 M42 28
700A10kgf/㎠ 700 905 894 60 3 850 33 M30 2820kgf/㎠ 680 1000 825 65 3 920 42.5 M42 28
750A10kgf/㎠ 750 970 952 70 3 910 33 M30 2820kgf/㎠ 730 1055 880 70 3 970 45.75 M48 28
800A10kgf/㎠ 800 1050 910 75 3 975 38 M36 2820kgf/㎠ 780 1120 935 73 3 1030 58.8 M48 28
900A10kgf/㎠ 900 1160 1020 80 3 1080 38 M36 3220kgf/㎠ 880 1230 1055 85 3 1140 51.84 M64 28
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
15
DONGHAE Co., Ltd.
FLANGE DIMENSION
DIN PN 10 & PN 16 & PN 25 BAR
Size
Flange Item Pressure rating
IN Dia.
d (mm)
Out Dia.
D (mm)
RF Dia.
g (mm)
Thickness
T (mm)
RF Thickness
f (mm)
PCD
C (mm)
Tap (h) Hole No.
(n) Hole Length (mm)
Tap Caliber (mm)
50
PN10 57 165 102 45 3 125 18 M16 4
PN16 57 165 102 45 3 125 18 M16 4
PN25 57 165 102 48 3 125 18 M16 4
80
PN10 88.9 200 138 50 3 160 18 M16 4
PN16 88.9 200 138 50 3 160 18 M16 8
PN25 88.9 200 138 58 3 160 18 M16 8
100
PN10 108 220 158 52 3 180 18 M16 8
PN16 108 220 158 52 3 180 18 M16 8
PN25 108 235 162 65 3 190 23 M20 8
125
PN10 133 250 188 55 3 210 18 M16 8
PN16 133 250 188 55 3 210 18 M16 8
PN25 133 270 188 68 3 220 27 M24 8
150
PN10 159 285 212 55 3 240 23 M20 8
PN16 159 285 212 55 3 240 23 M20 8
PN25 159 300 218 75 3 250 27 M24 8
200
PN10 216 340 268 62 3 295 23 M20 8
PN16 216 340 268 62 3 295 23 M20 12
PN25 216 360 278 80 3 310 27 M24 12
250
PN10 267 395 320 68 3 350 23 M20 12
PN16 267 405 320 70 3 355 27 M24 12
PN25 267 425 335 88 3 370 30 M27 12
300
PN10 318 445 370 68 4 400 23 M20 12
PN16 318 460 378 78 4 410 27 M24 12
PN25 318 485 395 92 4 430 30 M27 16
350
PN10 368 505 430 68 4 460 23 M20 16
PN16 368 520 438 82 4 470 27 M24 16
PN25 368 555 450 100 4 490 33 M30 16
400
PN10 419 565 482 72 4 515 27 M24 16
PN16 419 580 490 85 4 525 30 M27 16
PN25 419 620 505 110 4 550 36 M33 16
500
PN10 521 670 585 75 4 620 27 M24 20
PN16 521 715 610 90 4 650 33 M30 20
PN25 521 730 615 125 4 660 36 M33 20
600
PN10 622 780 685 80 5 725 30 M27 20
PN16 622 840 725 95 5 770 36 M33 20
PN25 622 845 720 125 5 770 39 M36 20
700
PN10 720 895 800 80 5 840 30 M27 24
PN16 720 910 795 100 5 840 36 M33 24
PN25 720 960 820 125 5 875 42 M39 24
800
PN10 820 1015 905 90 5 950 33 M30 24
PN16 820 1025 900 105 5 950 39 M36 24
PN25 820 1085 930 135 5 990 48 M45 24
900
PN10 920 1115 1005 95 5 1050 33 M30 28
PN16 920 1125 1000 110 5 1050 39 M36 28
PN25 920 1185 1030 145 5 1090 48 M45 28
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
16
Goods of DONGHAE Co,. Ltd.
SOFT SEAT KNIFE GATE VALVE(patent obtained product)
KNIFE GATE VALVE
COMPARISON OF GOODS OF DONG HAE CO., LTD. WITH OTHERS
Item SOFT SEAT KNIFE GATE VALVE KNIFE GATE VALVE
Material
Body Cast Stainless Steel, Cast Iron, Cast Steel Cast Stainless Steel, Cast Iron, Cast Steel
Seat Metal Seat + Soft seat = Duble Sealing Metal
Disc stainless steel plate stainless steel plate
TestPressure
10K150LBPN10
Body 32 bar 10bar
Seat 23 bar zero leakage 2.3 bar 40cc/min/inch
20K300LBPN25
Body 79 bar
Seat 58 bar zero leakage
Service Temperature 200 ℃ when applying VITON high temperature use depending on material
Fluid usedapplicable to all lines including water, gas, oil, slurry, water + slurry mixture
slurry, powder, chips, sand, etc.
Relationship with fluid1) structure with smooth flow of water2) applicable to all lines
1) mainly used for solids2) foreign substances buildup (consider installation direction)
Water StopPrimary sealing with soft seat +Secondary sealing with metal seat= can withstand high pressure.
1) structurally, leakage is not completely blocked : 40cc/min/inch2) limited application to external leakage, water line
Pricereduced by 5%~30% compared to the price of gate valve
low price
Weight ANSI 150LB 20" 385Kg 280Kg
security of space installed in a narrow space installed in a narrow space
OperatingForce
ANSI 150LB 20" 71N.m 361N.m
Installation Costreduced installation cost with the advantage of low weight and security of space
reduced installation cost with the advantage of low weight and security of space
Driving System1) hand wheel, gear hand wheel2) pneumatic cylinder 3) motor
1) hand wheel, gear hand wheel2) pneumatic cylinder3) motor
※ Substitution Effect
Comparing the above items : our developed water gate valve is superior in all conditions under service temperature 200℃,
effect when replacing existing valve
1) performance: leaks are completely blocked
2) there is a cost saving effect of about 30%
3) easy maintenance ⇒ the tangible and intangible effect of substitution type is big.
※ Large number of references to sewage treatment system and water supply plant.
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
Item SOFT SEAL SLUICE VALVE GATE VALVE (Gate Type) BUTTERFLY VALVE
Material
Body Cast Stainless Steel, Cast Iron, Cast Steel Cast Stainless Steel, Cast Iron, Cast Steel Cast Stainless Steel, Cast Iron, Cast Steel
Seat body bottom surface (epoxy sign surface) metal (cast iron + copper) metal, rubber seat
Disc cast iron+rubber coating(EPDM) stainless steel plate, cast iron stainless steel
TestPressure
10K150LBPN10
Body 14 bar 14 bar 14 bar
Seat 7.5 bar zero leakage 7.5 bar allow leakage 7.5 bar zero leakage
20K300LBPN25
Body 30 bar 30 bar not available
Seat 22 bar zero leakage 22 bar allow leakage not available
Service Temperature 150℃high temperature use depending on material
150℃ metal high temperature possible
Fluid used water, gas water, gas, oil water, gas, oil
Relationship with fluid
1) effective structure for pure water, gas line only
2) horizontal installation : not applicable to water + slurry line
1) applicable to water line 2) unsuitable for lines mixed with foreign substances lines(frequent residual buildup in the bottom of valve body)
1) even when the valve is opened, the disc remains on the flow path, causing problems in the quantity and slurry
2) friction of the seat during seat opening and closing causes seat wear
Water Stop
1) disc with rubber(wedge form) is the main bodyrole of index gripping sign seat side2) cannot withstand high pressure.3) wear of the disc rubber is severe due to vortex generated when the valve is locked.
1) suitable for line with low frequency operation2) Sealing structure as metal disc and seat are coercively slided against each other. Scratches on the seat surface or disc surface cause the index to drop.
1) usable at low pressure as sealed structure in which a rotating metal disc is adhered to a rubber seat surface,2) lifespan is short due to exposure to the flow path of seat surface.
Price different price by company. different price by company. low price
Weight ANSI 150LB 20" 680Kg 770Kg 320Kg
security of space can not be installed in a narrow space can not be installed in a narrow space can not be installed in a narrow space
OperatingForce
ANSI 150LB 20" 535N.m 780N.m 48N.m
Installation Cost installation cost is burdened by securing weight space.
installation cost is burdened as the weight and capacity are large.
reduced installation costs with the advantage of weight and security of space
Driving System1) hand wheel, gear hand wheel2) pneumatic cylinder -inappropriate use3) motor
1) hand wheel, gear hand wheel2) pneumatic cylinder -inappropriate use3) motor
1) hand wheel, gear hand wheel2) pneumatic cylinder3) motor
17
DONGHAE Co., Ltd.
Goods of
other
companies
SOFT SEAL SLUICE VALVE GATE VALVE (Gate Type) BUTTERFLY VALVE
DO
NG
HA
ESO
FT S
EAT
& PL
ATE-
TYPE
DIS
C T
YPE
WAT
ER G
ATE
VALV
E
18
CERTIFICATES
SANITATION AND SAFETY CERTIFICATE
1. CERTIFICATE NUMBER : KCW-2016-0006
2. MANUFACTURER : Dong Hae Co., Ltd.
3. OWNER : PARK YOUNG SOO 4. LOCATION OF HEAD OFFICE : 350-11, Habinnam-ro, Habin-myeon,
Dalseong-gun, Daegu, Republic of Korea
5. LOCATION OF FACTORY : 350-11, Habinnam-ro, Habin-myeon,
Dalseong-gun, Daegu, Republic of Korea
6. PRODUCT : Sluice valves for water supply
7. TYPE : Refer to reverse side
8. USE : Water supply facilities for general water works
This is to certify that the sanitation and safety products
described above have been produced according to the
Article 14 of WATER SUPPLY AND WATERWORKS INSTALLATION
ACT of the Republic of Korea
Certification Date : Jan-19, 2016
Certified by President
Korea Water and Wastewater Works Association
244, Daerim-ro, Yeongdeungpo-gu, Seoul, Korea
DO
NG
HA
ESO
FT SEAT & PLATE-TYPE DISC
TYPEW
ATER G
ATE VALVE
PRODUCTS
19
Knife Gate Valve
Diverter Valve
Orifice Valce Swing Gate Valve
Slide Gate Valve Soft Seat Knife Gate Valvefor Water Works
DONGHAE Co., Ltd.
350-11, Habinnam-ro, Habin-myeon, Dalseong-gun, Daegu, Republic of Korea
Tel. 82-53-585-6992/4Fax. 82-53-585-6993E-mail. [email protected] Website. www.dh-valve.co.kr
DONGHAE Co., Ltd.
Designed by 2017. 05