7/31/2019 Space Shuttle Updated
1/38
1. INTROUCTION
Origin of the Report
This report has been compiled by the Students of Second Year
Engineering of Production of Fr. C.R.C.E. for the year 2010-2011.
The subject Title chosen for this Report is SPACE SHUTTLE and has
been submitted as a part of the curriculum for the subject of PCT.
In its 26-year history, the space shuttle program has seenexhilarating highs and devastating lows. The fleet has taken
astronauts on dozens of successful missions, resulting in
immeasurable scientific gains. But this success has had a serious
cost. In 1986, the Challenger exploded during launch. In 2003, the
Columbia broke up during re-entry over Texas. Since the Columbia
accident, the shuttles have been grounded pending redesigns toimprove their safety. The 2005 shuttle Discovery was supposed to
initiate the return to flight, but a large piece of insulating foam broke
free from its external fuel tank, leaving scientists to solve the mystery
and the program grounded once more until July 2006, when the
Discovery and Atlantis both carried out successful missions.
In this article, we examine the monumental technology behind the
shuttle program, the mission it was designed to carry out, and the
extraordinary efforts that have been made to return the shuttle toflight.
SHUTTLE DESIGN AND DEVELOPMENT
In the post-Apollo era, the Space Shuttle was intended to make
access to space "routine" and less expensive. To meet these goals, it
7/31/2019 Space Shuttle Updated
2/38
had to be reusable and economical to
develop and operate. Thus, the Shuttle was
shaped not only by engineering
considerations but also by pressure from the
White House and Congress to control itscost.
AN AL LY FOR THE SH UTTLE
Because the Department of Defense was
interested in using the Shuttle to launch
reconnaissance and other military satellites,
military requirements also influenced the
Shuttle's design. A delta wing was chosenfor maneuverability, and the size of the
payload bay was increased to ensure that it
could hold the largest planned military
payloads.
THE CHANGING SHAPE OF THE SHUTTLE
During the early 1970s, various Space
Shuttle designs were proposed and rejected
until an acceptable balance between function
and cost was reached.
NASA's concept in 1969 was a reusable
manned booster and orbiter, but
development costs were too high. In mid-
1971, North American Rockwell proposed a
fully reusable shuttle, like this model, but
operating costs were considered too high.
To cut costs, NASA abandoned the fully
reusable Shuttle design in favor of one that
was partially reusable. Several designs were
7/31/2019 Space Shuttle Updated
3/38
considered, including this Grumman Aerospace concept for a vehicle
with stages that used the Apollo-era Saturn F-1 engine.
In early 1972, NASA decided on a partially reusable Space Shuttleproposed by North American Rockwell. It included a reusable
manned orbiter, two reusable solid-propellant booster rockets, an
expendable fuel tank, and an enlarged cargo bay. President Richard
Nixon approved the new Space Shuttle design.
7/31/2019 Space Shuttle Updated
4/38
2. THE SPACE SHUTTLE
The space shuttle consists of three major components:
The orbiter which houses the crew;
A large external fuel tank that holds fuel for the main engines;
and
Two solid rocket boosters which provide most of the shuttle's lift
during the first two minutes of flight.
All of the components are reused except for the external fuel tank,
which burns up in the atmosphere after each launch.
7/31/2019 Space Shuttle Updated
5/38
A typical shuttle mission is as follows:
getting into orbit
launch - the shuttle lifts off the launching pad
ascent
orbital maneuvering burn
orbit - life in space
re-entry
landing
A typical shuttle mission lasts seven to eight days, but can extend to
as much as 14 days depending upon the objectives of the mission.
Let's look at the stages of a mission one by one.
7/31/2019 Space Shuttle Updated
6/38
2.1. ORBITTER
The orbiter is the manned spacecraft of the Space Shuttles three
main components. It can transport into near earth orbit (115 to 690
miles from the earths surface) cargo weighing up to 56,000 pounds,
and it can return with up to 32,000 pounds. This cargo, called
payload, is carried in a bay 15 feet in diameter and 60 feet long. The
major structural sections of the orbiter are:
The forward fuselage, which contains the pressurized crew
compartment
The mid fuselage, which contains the cargo bay
The aft fuselage, from which the main engine nozzles project
The vertical tail, which serves as a speed brake used during
re-entry and landing.
7/31/2019 Space Shuttle Updated
7/38
The crew compartment is divided into two levels, the flight deck on
top and the middeck below. The flight deck includes all flight controls
used for launch, rendezvous operations, and landing. The middeck
provides the crew's working, eating, and sleeping environment. It also
houses the electronic, guidance, and navigation systems. The orbiternormally carries a flight crew of up to 7, but a total of 10 people could
be carried under emergency conditions.
7/31/2019 Space Shuttle Updated
8/38
2.2. SPACE SHUTTLE MAIN ENGINE(SSME)
The Space Shuttle orbiter has three main engines weighing 7,000
pound each. They are very sophisticated power plants that burn liquid
hydrogen with liquid oxygen, both from the external tank (ET). The
main engines are located in the aft (back) fuselage (body of the
spacecraft). They are used for propulsion during launch and ascent in
to space with the aid of two powerful solid rocket boosters (SRBs).
The main engines provide 29% of the thrust needed to lift the shuttle
off the pad and into orbit. Each engine can generate almost 400,000
pounds of thrust at liftoff.
7/31/2019 Space Shuttle Updated
9/38
2.2.1. MAIN ENGINE: FUEL
As the Shuttle accelerates, the main engines burn a half-million gallons of
liquid propellant provided by the ET. The main engines burn liquid
hydrogen (LH2) --the second coldest liquid on Earth at -423 degrees
Fahrenheit (minus 252.8 degrees Celsius) and liquid oxygen.
Cryogenic propellants are liquid oxygen (LOX), which serves as an
oxidizer, and liquid hydrogen (LH2), which is a fuel.
In gaseous form, oxygen and hydrogen have such low densities that
extremely large tanks would be required to store them aboard a rocket. But
cooling and compressing them into liquids vastly increases their density,
making it possible to store them in large quantities in smaller tanks.
7/31/2019 Space Shuttle Updated
10/38
2.2.2. MAIN ENGINE: OXIDIZER
Oxidizer from the external tank enters the orbiter's main propulsion system
liquid oxygen feed line. Here it branches out into three parallel paths, one
to each engine. In each branch, liquid oxygen pre-valve must be opened to
permit flow to the low-pressure oxidizer.
Low Pressure Oxidizer Turbo-pump (LPOT) is an axial-flow pump driven by
a six-stage turbine powered by liquid oxygen. The flow from the LPOT is
supplied to the High-Pressure Oxidizer Turbo-pump (HPOT). The HPOT
consists of a main pump and a pre-burner pump .The main pump boosts
the liquid oxygen's pressure.
The Low Pressure Fuel Turbo-pump (LPFT) is an axial-flow pump driven by
a two-stage turbine powered by gaseous hydrogen. It boosts the pressure
of the liquid hydrogen
7/31/2019 Space Shuttle Updated
11/38
The High Pressure Fuel Turbo-pump (HPFT) is a three-stage centrifugal
pump driven by a two-stage, hot-gas turbine. It boosts the pressure of the
liquid hydrogen.
2.2.3. MAIN ENGINE: PRODUCING THRUST
The three Space Shuttle Main Engines, in
conjunction with the Solid Rocket Boosters,
provide the thrust to lift the Orbiter off the
ground for the initial ascent. The main engines
continue to operate for 8.5 minutes after launch,
the duration of the Shuttle's powered flight. After
the solid rockets are jettisoned, the main
engines provide thrust which accelerates the
Shuttle from 4,828kilometers per hour (3,000
mph) to over 27,358 kilometers per hour (17,000
mph) in just six minutes to reach orbit. They
create a combined maximum thrust of more than
1.2 million pounds.
2.2.4.MAIN ENGINES:
ADDITIONAL INFORMATION
The inner surface of each combustion chamber,
as well as the inner surface of each nozzle, is
cooled by gaseous hydrogen flowing through
coolant passages. Thermal protection for the
nozzles is necessary at the nozzle/engine attachpoint because of the exposure that portions of the nozzles experience
during the launch, ascent, on-orbit and entry phases of a mission. The
insulation consists of four layers of metallic batting covered with a metallic
foil and screening.
7/31/2019 Space Shuttle Updated
12/38
The five propellant valves on each engine (oxidizer pre-burner oxidizer, fuel
pre-burner oxidizer, main oxidizer, main fuel, and chamber coolant) are
hydraulically actuated and controlled by electrical signals from the engine
controller. The main oxidizer valve and fuel bleed valve are used after
shutdown of the SSMEs approximately eight and a half minutes after liftoff.
The main oxidizer valve is opened during a propellant dump to allow
residual liquid oxygen to be dumped overboard through the engine, and the
fuel bleed valve is opened to allow residual liquid hydrogen to be dumped
through the liquid hydrogen fill and drain valves overboard. After the dump
is completed, the valves close and remain closed for the remainder of the
mission.
7/31/2019 Space Shuttle Updated
13/38
7/31/2019 Space Shuttle Updated
14/38
hypergolic, pressure-fed, fixed thrust engine. There are two OMS engines
per orbiter vehicle.
2.4. REACTION CONTROL SYSTEM (RCS)
The reaction control system (RCS) on the orbiter is very similar to the
OMS. It helps to maneuver the orbiter in more delicate situations. Two
prime examples of when the RCS is used is when the orbiter is docking
with the International Space Station (ISS) or capturing a satellite to be
repaired. The RCS consists of 44 small nozzles that are fueled by the same
liquid nitrogen tetra-oxide and mono-methyl hydrazine combination as the
OMS. Six of these engines produce a thrust of 25 pounds each, while theother 38 produce 870 pounds of thrust each. Since the RCS is used for
delicate maneuvering, different combinations and durations of engine burns
can be used.
This shows one cluster of RCS engines found next to the left aft OMS
engine. Additional engines are found next to the right aft OMS engine aswell as on the side and nose of the orbiter.
7/31/2019 Space Shuttle Updated
15/38
2.5. ECLSS
The environmental control and life support system (ECLSS) provides a
pressurized and livable environment for the orbiters crew. This
environment is not only important for the crew, but it is essential to the
protection and proper functioning of the onboard avionics. An additional
function of the ECLSS is the management, storage, and disposal of water
and crew waste.
ECLSS: Four Main Sub-Systems
1. Pressure Control System: maintains a pressure of 14.7 psia of a breathable
mixture of oxygen and nitrogen in the crew compartment. Nitrogen also is
used to pressurize wastewater tanks.
2. Atmospheric Revitalization System: uses circulated air and water coolant
loops to remove heat, control humidity, and purify the air in the cabin.
3. Active Thermal Control System: uses two Freon loops to collect heat from
the orbiters waste systems and transfer it overboard.
4. Supply & Wastewater System: stores water that is produced by the fuel
cells for use by the orbiter crew (drinking, cooking, hygiene). It also stores
liquid waste produced by the crew, as well as wastewater collected from
7/31/2019 Space Shuttle Updated
16/38
the humidity separator. It has the ability to dump both supply and
wastewater overboard.
2.6. THE SOLID ROCKETBOOSTERS (SRB)
The solid rocket boosters, or SRBs, are the largest
solid fuel motors ever used in space flight, and are
also the first designed to be reusable. Each booster
rocket is attached to either side of the external tank(ET) Each SRB weighs approximately 1,300,000
pounds (589,670 kg) at launch with roughly 85
percent being the weight of the solid fuel itself.
When the Shuttles three main parts are assembled
and placed on the mobile launch platform, the
weight of the ET and the orbiter are held up by the
two SRBs. Each SRB is bolted to the launch
platform by four pyrotechnic bolts.
The two SRBs provide 71.4 percent of the main
thrust needed to lift the Space Shuttle off the launch
pad. Each booster has a thrust of approximately
3,300,000 pounds (14,685 kilonewtons) at launch
and help lift the Shuttle up to an altitude of about
150,000 feet, or 28 miles (50 kilometers). The SRBs
burn for approximately two minutes and are then
jettisoned. During their decent, three main
parachutes are deployed from the top of each SRB
to allow for a safe splashdown in the Atlantic
Ocean.
7/31/2019 Space Shuttle Updated
17/38
2.7. EXTERNAL TANK (ET)
The external tank (ET) is the largest of the three main parts of the shuttle
system (ET, SRBs, orbiter). When fully loaded, it becomes the heaviest
element of the shuttle as well, going from 66,000 pounds to 1,655,600
pounds.
The ETs liquid hydrogen (fuel) and liquid oxygen (oxidizer) supplies the
three Space Shuttle main engines (SSMEs), located in the orbiter, during
launch and ascent into space. Fuel from the ET begins to be consumed 6
seconds prior to launch of the Shuttle as the main engines power up to 90percent. The ET continues to supply fuel to the SSMEs until all of the liquid
fuel is consumed and the shuttle approaches its orbit, the ET is jettisoned
off. As it passes back through the atmosphere, it begins to disintegrate.
Any parts not completely destroyed falls into the remote parts of the ocean
and are never recovered or reused.
7/31/2019 Space Shuttle Updated
18/38
Three important components of the ET are the
Oxygen tank
The inter tank
Hydrogen tank
2.7.1. ET: OXYGEN TANK
The liquid oxygen tank is made out of aluminum monocoque and operates
in a pressure range of 20 to 22 psig (pressure per square inch-gauge). The
tank contains anti-slosh and anti-vortex structures to reduce fluid motion
during launch and ascent into space. The tank feeds into a 17-inch
diameter line that transports the liquid oxygen through the inter tank, then
outside the ET to the SSMEs. The 17-inch-diameter feed line allows liquid
oxygen to flow at approximately 2,787 pounds per second with the SSMEs
operating at 104 percent (that is equal to a maximum flow of 17,592 gallons
per minute). The liquid oxygen tank's double-wedge nose cone reduces
drag and heating, contains the vehicle's ascent air data system, and serves
as a lightning rod. The liquid oxygen tank's volume is 19,563 cubic feet
7/31/2019 Space Shuttle Updated
19/38
(143,351 gallons) and is 331 inches in diameter, 592 inches long, and
weighs 12,000 pounds empty (1,361,936 pounds full).
2.7.2. ET: INTERTANK
The unpressurized intertank is a steel and aluminum cylindrical structure
that is joined on either end to the liquid oxygen and liquid hydrogen tanks.
The intertank houses ET instrumentation components and contains an
umbilical plate that allows for the detection (especially of hazardous gases)
and release of excess gas supplies (mainly boiled of hydrogen).
The intertank is 270 inches long, 331 inches in diameter and weighs 12,100
pounds.
7/31/2019 Space Shuttle Updated
20/38
2.7.3. ET: LIQUID HYDROGEN TANK
The liquid hydrogen tank is an aluminum structure. The hydrogen tank is2.5 times larger than the oxygen tank but weighs only one-third as much
when filled to capacity. The reason for the difference in weight is that liquid
oxygen is 16 times heavier than liquid hydrogen.
7/31/2019 Space Shuttle Updated
21/38
7/31/2019 Space Shuttle Updated
22/38
2.8.1. FIRST STAGE ASCENT
After about two minutes, when the shuttle is about 45 kilometers (28miles) high and traveling more than 4,828 kilometers per hour (3,000mph), the propellant in the two boosters is exhausted and thebooster casings are jettisoned. They parachute into the AtlanticOcean, splashing down about 225 kilometers (140 miles) off theFlorida coast.
The empty boosters -- the largest solid rocketsever built -- are recovered by special NASA shipsto be eventually refilled with fuel and launchedagain. The solid fuel used by the boosters isactually powdered aluminum -- a form of thesame metal you find in foil wraps in your kitchen -- with oxygen provided by a chemical calledammonium perchlorate.
2.8.2. SECOND STAGE ASCENT
The three space shuttle main engines, attached to the rear of the shuttle
orbiter, continue to fire until about 8.5 minutes after liftoff, burning a half-
million gallons of liquid propellant from the large, orange external fuel tank
as the shuttle accelerates. The main engines burn liquid hydrogen the
second coldest liquid on Earth at minus 252.7 degrees Celsius (minus 423
degrees Fahrenheit) and liquid oxygen. Since the hydrogen and oxygen
can reach a temperature as high as 3,315.6 degrees Celsius (6,000degrees Fahrenheit) as they burn higher than the boiling point of iron
the engines operate at greater temperature extremes than any other piece
of machinery ever built.
7/31/2019 Space Shuttle Updated
23/38
The engines' exhaust is primarily water vapor as the hydrogen and oxygencombine. As they push the shuttle toward orbit, the engines consume theliquid fuel at a rate that would drain an average family swimming pool every25 seconds and they generate over 37 million horsepower. Their turbinesspin almost 13 times as fast as an automobile engine spins when it isrunning at highway speed.
Eight and a half minutes after launch, with the shuttle traveling 8 kilometers(5 miles) a second, the engines shut down as they use the last of their fuel.
A few seconds after the engines stop, the external fuel tank is jettisonedfrom the shuttle. The only part of the shuttle that is not reused, the tank re-enters the atmosphere and burns up over the Pacific Ocean. The shuttleorbiter, the only space shuttle component that will circle the Earth, weighsonly about 117,934 kilograms (260,000 pounds). The shuttle has
consumed more than 1.59 million kilograms (3.5 million pounds) of fuelduring its first 8 minutes of flight.
2.9. Landing
When it is time to return to Earth, the shuttle isrotated tailfirst into the direction of travel to preparefor another firing of the orbital maneuvering systemengines, a firing called the deorbit burn. This enginefiring, usually about three minutes long, slows theshuttle by only a couple of hundred miles per hour,but it is enough that it begins to descend toward theatmosphere. The engine firing takes place usuallyhalf a world away from the intended landing site: for example, the firingmay take place above the Indian Ocean to put the shuttle on course towarda landing at the Kennedy Space Center. The three-minute firing is the onlyactive brake the shuttle will use as it heads toward a landing. The rest of itsdescent toward Florida and trip halfway around the world is devoted to
slowing down using only the drag produced by the atmosphere.After the firing takes place, it is about another 25 minutes before the shuttlewill descend to a point that it first encounters the effects of the atmosphere,usually at an altitude of about 129 kilometers (80 miles) and a range ofmore than 8,047 kilometers (5,000 miles) from the landing site. Before theshuttle encounters the atmosphere, leftover fuel is burned from the forward
7/31/2019 Space Shuttle Updated
24/38
reaction control system steering jets as asafety precaution. Before it reaches the upperatmosphere, the shuttle is oriented with thenose angled up about 40 degrees fromhorizontal and its wings level, an orientationthat keeps the black thermal tiles on theunderside facing the majority of the heatgenerated by its encounter, heat that canrange as high as 1,648.9 degrees Celsius(3,000 degrees Fahrenheit) on the leadingedges of the wings and nose.
The aft steering jets are used to control the shuttle's orientation as itdescends into the atmosphere. As it descends, however, it begins a
transition from spacecraft to aircraft, and its aerosurfaces -- the wing flapsand rudder -- gradually become active as air pressure builds. As thosesurfaces become usable, the steering jets turn off automatically.
The shuttle's altitude drops from 15,240 meters (50,000 feet) to about3,048 meters (10,000 feet) as it begins to align with the runway. As it alignswith the runway, the shuttle then begins a steep descent with the noseangled as much as 19 degrees down from horizontal, a glide slope that isseven times as steep as the average commercial airliner landing. Duringthe final approach, the shuttle drops toward the runway 20 times faster than
a commercial airliner as its rate of descent and airspeed increase. When itis less than 610 meters (2,000 feet) above the ground, the commanderpulls up the nose and slows the rate of descent in preparation fortouchdown.
At this point, the pilot deploys the landing gear. As the shuttle's mainlanding gear touches down, it is dropping at less than 8 kilometers per hour(5 miles per hour) and has a forward speed of about 354 kilometers perhour (220 miles per hour). After touchdown, the pilot deploys a drag chute
from a compartment located just below the tail and the commander beginsto drop the shuttle's nose gear slowly toward the runway. The drag chute isthen jettisoned before the wheels come to a stop to ensure that it falls clearof the shuttle.
7/31/2019 Space Shuttle Updated
25/38
3. Space Shuttle Improvements
Spaceship, Heal Thyself
Damage to a spaceship's hull often begins as tiny surface cracks, which
are invisible to the eye. These micro-thin
cracks can also form underneath the surface
of the material, where they are hidden from
sight. Once these cracks form, they will grow
until the material weakens and breaks. In
order to prevent these tiny cracks from
spreading, a new material has been developed that will sense damage and
mend itself instantly. This self-healing ability could significantly prolong the
life of the spacecraft.
There are three parts to this new self-healingmaterial:
Composite material - The bulk of thematerial is an epoxy polymer made from
carbon, glass or Kevlar and a resin, such asepoxy, vinyl ester or urethane. Microencapsulated healing agent - This is
the glue that fixes the microcracks formed inthe composite material. This healing agentis a fluid called dicyclopentadiene, orDCPD. This fluid is encapsulated tinybubbles that are spread throughout thecomposite material. There are about 100 to200 capsules per cubic inch.
7/31/2019 Space Shuttle Updated
26/38
Catalyst - In order to polymerize, the healing agent must come intocontact with a catalyst. A patented catalyst, calledGrubbs'
catalyst, is used for this self-healing material. It is important thatthe catalyst and healing agent remain separated until they areneeded to seal a crack.
When a microcrack forms in the compositematerial, it will spread through the material.By doing so, this crack will rupture themicrocapsules and release the healing agent.This healing agent will flow down through thecrack and will inevitably come into contactwith the Grubbs' catalyst, which initiates thepolymerization process. This process willeventually bond the crack closed. In tests, theself-healed composite material regained asmuch as 75 percent of its original strength.
The market for this kind of self-healing material goes far beyond spacecraft.Approximately 20 million tons of composite material is used every year for
engineering, defense projects, offshore oil exploration, electronics andbiomedicine. This self-healing material will show up in many everydayitems, including polymer composite circuit boards, artificial joints, bridgesupports and tennis rackets.
7/31/2019 Space Shuttle Updated
27/38
Living Wires
During long space missions, maintaining the health of onboard computers
and electronics systems will be just as important as maintaining the exterior
shell. NASA is working on a new type of system that will give self-repairing
capabilities to the internal wiring of the spacecraft. This new evolvable
hardware will be able to monitor the electronics and correct systems before
malfunctions become a crucial problem.
Initially, a self-repairing flight system would be used in airplanes beforebeing moved to spacecraft. At the NASA Aviation Safety Program, basedat the Langley Research Center, researchers are working on this kind ofself-healing computer system. In 1999, the United States space agencyreported that it could have commercial systems available by 2004. The ideahere is to create a self-healing computer system that uses a cluster of low-powerprocessors that are loosely coupled to spacecraft systems viawireless links.These health management and control upset management systemscould detect, diagnose and prevent abnormalities before problems becomeuncorrectable. The computerized health management system will monitorvital functions, help prevent and reduce any malfunctions, enhance a flight
crew's ability to respond to problems and reduce a pilot's workload duringan emergency. Control upset management would include advanceddetection and prediction algorithms, display formats, pilot cueing andguidance and control methods to prevent accidents when failures occur.Both of these systems could work for aircraft and spacecraft.
http://www.howstuffworks.com/framed.htm?parent=self-healing-spacecraft.htm&url=http://www.larc.nasa.gov/http://www.howstuffworks.com/microprocessor.htmhttp://www.howstuffworks.com/microprocessor.htmhttp://www.howstuffworks.com/framed.htm?parent=self-healing-spacecraft.htm&url=http://www.larc.nasa.gov/7/31/2019 Space Shuttle Updated
28/38
4. CONCLUSIONS
It is therefore important to note that the space shuttle programs were
viewed with great importance after the Apollo-era, as clear by the Quote of
Neil Armstrong
This is one small step of man, but a giant leap for mankind
These programs are beneficial not only to bring forward the findings in the
outer space but also to the defense sector in installing stations in space ,
which can be the upcoming battlefield following the star war series.
But before these brilliant ideas are put into use it is necessary to look into
nook and corners of space shuttle safety.
Hidden beneath its familiar shape, the Space Shuttle has undergone ametamorphosis. From the inside out, thousands of advances in technologyand enhanced designs have been incorporated into the Shuttle since it firstlaunched. Today's Shuttle is a safer, more powerful and more efficientspacecraft. When the Shuttle Atlantis launches this year, it will be the mostup-to-date Space Shuttle ever. From a new "glass cockpit" to main enginesestimated threefold safer, Atlantis is far different than when it first flew in
1985.This year also will see the 100th Space Shuttle launch in history, amilestone for a workhorse that has taken over 600 passengers and 3million pounds of cargo to orbit. The Shuttle fleet has spent almost two anda half years in space. But even the most-traveled Shuttles remain young inthe lifetimes for which they were built. NASA is preparing for the possibilityof flying the Space Shuttle for at least another decade. Future upgrades willmake this American cornerstone of world spaceflight even better towarda goal of doubling its launch safety by 2005.
Since 1992: Not only has the cargo capacity of the Shuttle increased by 8tons, the annual cost of operating the Shuttle has decreased by 40 percent.Improvements to the main engines and other systems have reduced theestimated risks during launch by over 80 percent. And the number of allactual problems experienced by the Shuttle in flight has decreased by 70percent. Although they have flown for almost 20 years, the Space Shuttle
7/31/2019 Space Shuttle Updated
29/38
fleet has used only about a quarter of the lifetime for which it was designed.Discovery, the most flown Shuttle, has completed 27 trips to space out of100 flights originally designed for each Shuttle.
With the recent events being taken into consideration, like the Columbia
break up on re-entry various redesigns of the shuttle structure and design
were considered.
To bring the shuttles back to flight status, NASA has focused on threemajor areas:
Redesign the ET to prevent insulation from damaging the shuttleorbiter
Improve inspection of the shuttle to detect damage
Find ways to repair possible damage to the orbiter while in orbit Formulate contingency plans for the crew of a damaged shuttle to
stay at the ISS until rescue
The ET holds cold liquefied gases as fuel (oxygen, hydrogen). Because thetemperatures are so cold, water from the atmosphere condenses andfreezes on the surfaces of the ET and the fuel lines leading in to the orbiter.Ice can fall off the ET itself or cause the ET foam insulation to crack and falloff. In addition to ice, if any of the liquid gas were to leak and get under thefoam, it would expand and cause the foam insulation to crack. So much of
the ET redesign has focused on eliminating places where condensationcan occur.
Apart from the externals the shape of the hull and design are more
specifically viewed after the introduction of nano-technology that produces
efficient materials promising the detection and self healing of the external
structure as well as onboard computers and electronics to ensure safety of
crew members.
In the future, spacecraft could possibly take us to the edge of our solarsystem and beyond. If that is to be possible, we will need spacecraft withbuilt-in safeguards. These smart-spacecraft will have to be able to senseand react to potential problems that might go unseen by their humanpassengers.
7/31/2019 Space Shuttle Updated
30/38
SUMMARY
BENEATHTHESKIN
Tomorrows Shuttle: Cutting Risks in Half by 2005
Enhancements now under development could double the Shuttle's safety
by 2005: New sensors and computer power in the main engines will "see"
trouble coming a split second before it can do harm, allowing a safe engine
shut down. A new engine nozzle will eliminate the need for hundreds of
welds and potential leaks. Electric generators for the Shuttle's hydraulics
will replace the highly volatile rocket fuel that now powers the system. Anda next-generation "smart cockpit" will reduce the pilot's workload in an
emergency, allowing the crew to better focus on critical tasks. Other
improvements will make steering systems for the solid rockets more
reliable, make the manufacturing of solid propellant safer and increase the
strength of external fuel tank welds.
Solid Rockets and External Tank Upgrades
Future improvements for the solid rocket boosters include a redesign of several
valves, filters and seals in the steering system to enhance their reliability as well
as studies of the potential for an electrical system to power the booster
hydraulics. Also, changes to the solid rocket propellant manufacturing process will
make the workplace safer for Shuttle technicians. For the external tank, a new
friction-stir welding technique will produce stronger and more durable welds
throughout the tank.
Better Main Engines
7/31/2019 Space Shuttle Updated
31/38
The Space Shuttle's main engines operate at greater extremes oftemperature and pressure than any other machine. Since 1981, threeoverhauls to the original design have more than tripled estimates of their
safety. Now, a fourth major overhaul is planned that will make them evensafer by 2005. The planned improvements include a high-tech optical andvibration sensor system and computing power in the engines that will "see"trouble coming a fraction of a second before it can do harm. Called the
Advanced Health Monitoring System, the sensors will detect and track analmost microscopic flaw in an engine's performance in a split second,allowing the engine to be safely shut down before the situation can growout of control. Also, the engine's main combustion chamber will beenlarged to reduce the pressures on internal components without reducingthe thrust, and a new, simplified engine nozzle design will eliminate the
need for hundreds of welds over 500 feet of them and potential leaks.
Smart Cockpit
The new "glass cockpit" that will be initiated when Atlantis launches onSTS-101 sets the stage for the next cockpit improvement, planned to fly by2005: a smart cockpit that reduces the pilots workload during criticalperiods. The enhanced displays won't fly the Shuttle, but they will do muchof the deductive reasoning required for a pilot to respond to a problem. By
simplifying the pilots' job, this smartcockpit will allow astronauts to betterfocus on critical tasks in an emergency.
Todays Space Shuttle
Since 1992: Not only has the cargo capacity of the Shuttle increased by 8tons, the annual cost of operating the Shuttle has decreased by 40 percent.Improvements to the main engines and other systems have reduced the
estimated risks during launch by over 80 percent. And the number of allactual problems experienced by the Shuttle in flight has decreased by 70percent. Although they have flown for almost 20 years, the Space Shuttlefleet has used only about a quarter of the lifetime for which it was designed.Discovery, the most flown Shuttle, has completed 27 trips to space out of100 flights originally designed for each Shuttle.
7/31/2019 Space Shuttle Updated
32/38
SSPPAACCEE SSHHUUTTTTLLEEADITYA ASERKAR (002) RAHUL BARANWAL (004)
PARIJAT BHANGALE (006) VAIBHAV BHOSLE (008)
NRUPA CHITLEY (010) ANKIT DAGADU (011)
KUNAL KADAM (028) ARCHIT SHETTY (060)
7/31/2019 Space Shuttle Updated
33/38
SPACE SHUTTLE
For
THE HUMANITIES AND SCIENCE SECTION
By
ADITYA ASERKAR (002) RAHUL BARANWAL (004)
PARIJAT BHANGALE (006) VAIBHAV BHOSLE (008)
NRUPA CHITLEY (010) ANKIT DAGADU (011)
KUNAL KADAM (028) ARCHIT SHETTY (060)
FR. CONCEICAO RODRIGUES COLLEGE OF ENGINEERING
UNIVERSITY OF MUMBAI
NOVEMBER 2010
7/31/2019 Space Shuttle Updated
34/38
LETTER OF TRANSMITTAL
15 November, 2010
Mrs. Abha Jha
The Humanities & Science Section
Fr. Conceicao Rodrigues College of Engineering
Bandra, Mumbai 400050
Dear Maam
We feel pleased to present our formal report on our topic for presentation
SPACE SHUTTLE. The report focuses on the valuable information about
the Space Shuttle and the system that makes each of its three main
components.
The main objective of this report was to draw attention and to open doors to
arguably mans most incredible invention.
We would like to thank you for your expertise and furnishing us with
instructions regarding the layout and design of our report.
Yours truly,
Aditya Aserkar
Rahul Baranwal
Parijat Bhangale
Vaibhav Bhosle
Nrupa Chitley
Ankit Dagadu
Kunal Kadam
Archit Shetty
7/31/2019 Space Shuttle Updated
35/38
TABLE OF CONTENTS
Pages
Cover Page I
Title Page II
Letter of Transmittal III
Table of Contents IV
Summary V
1. Introduction 1
2. Space Shuttle 4
2.1. The Orbiter 6
2.2. Space Shuttle Main Engine(SSME) 8
2.2.1. Main Engine: Fuel 9
2.2.2. Main Engine: Oxidizer 10
2.2.3. Main Engine: Producing Thrust 11
2.2.4. Main Engine: Additional information 11
2.3. OMS 13
2.4. RCS 14
2.5. ECLSS 15
2.6. SRB 16
2.7. External Tank 17
7/31/2019 Space Shuttle Updated
36/38
2.7.1. External Tank : Oxygen Tank 18
2.7.2. External Tank : Internal Tank 19
2.7.3. External Tank : Liquid Hydrogen Tank 20
2.8. Launch 21
2.8.1. First Stage Ascent 22
2.8.2. Second Stage Ascent 22
2.9. Landing 23
3. Space Shuttle Improvements 25
4. CONCLUSION 28
5. GLOSSARY 30
7/31/2019 Space Shuttle Updated
37/38
5. GLOSSARY
TERMINOLOGY
External Tank ET
Kennedy Space Center KSC
Launch Control Center LCC
Orbiter Processing Facility OPF
Shuttle Landing Facility SLF
Space Transportation System STS
Vertical Assembly Building VAB
Rotating Service Structure RSS
Orbiter Weather Protection OWP
7/31/2019 Space Shuttle Updated
38/38
6. BIBLIOGRAPHY
www.howstuffworks.com/spacesiphealthyself
www.wikipedia.com/spaceshuttles
www.nasa.gov.org
www.google.com
www.ksc.nasa.gov
www.oposite.stsci.edu/pubinfo/pictures.html
www.spaceflight.nasa.gov/realdata/elements/index.html
http://www.howstuffworks.com/spacesiphealthyselfhttp://www.howstuffworks.com/spacesiphealthyselfhttp://www.wikipedia.com/spaceshuttleshttp://www.wikipedia.com/spaceshuttleshttp://www.nasa.gov.org/http://www.nasa.gov.org/http://www.google.com/http://www.google.com/http://www.ksc.nasa.gov/http://www.ksc.nasa.gov/http://www.oposite.stsci.edu/pubinfo/pictures.htmlhttp://www.oposite.stsci.edu/pubinfo/pictures.htmlhttp://www.spaceflight.nasa.gov/realdata/elements/index.htmlhttp://www.spaceflight.nasa.gov/realdata/elements/index.htmlhttp://www.spaceflight.nasa.gov/realdata/elements/index.htmlhttp://www.oposite.stsci.edu/pubinfo/pictures.htmlhttp://www.ksc.nasa.gov/http://www.google.com/http://www.nasa.gov.org/http://www.wikipedia.com/spaceshuttleshttp://www.howstuffworks.com/spacesiphealthyself