Turn
in
g Your Assets into Dollars
Online AuctionSURPLUS
EQUIPMENT
EVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
163 Associates Lane - Indian Trail, NC 28079Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325
www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
SURPLUS EQUIPMENT TO A
MAJOR AEROSPACE MANUFACTURERCNC & FABRICATING MACHINERY
BECKWOOD TRIFORM SF20T-240 20 TON X 240" HYDRAULIC EXTRUSION STRETCH FORMING MACHINE
FARNHAM 20' AIRCRAFT FORMING / CONTOUR / LEADING EDGE ROLL
BIDDING BEGINS TO CLOSE
TUESDAY, APRIL 16TH @ 12:00 P.M. EDT
Inspection: BY APPOINTMENT ONLY
SECURED FACILITYVISIT
WWW.ASSET-SALES.COM FOR VISITOR
INFORMATION AND VERIFICATION FORM
5486 FAIRCHILD ROAD CRESTVIEW, FL 32539
2014
1 OF 2
MACHINERY INSPECTION DATE & TIME – MONDAY, APRIL 15TH FROM 8:00 A.M. - 4:00 P.M. CDT
2
FARNHAM 20' AIRCRAFT FORMING / CONTOUR / LEADING EDGE ROLL
BECKWOOD TRIFORM SF20T-240 20 TON X 240" HYDRAULIC EXTRUSIONSTRETCH FORMING MACHINE
2014
1 OF 2
ONLINE AUCTION SALE DATE & TIME – BIDDING BEGINS TO CLOSE TUESDAY, APRIL 16TH @ 12:00 P.M. EDT
Sign up for our eblast at www.asset-sales.com
You will receive notifications of upcoming auctions.
3
(2) DMS 5' X 12' 3-AXIS CNC HIGH SPEED GANTRY ROUTERS
FARNHAM 10' AIRCRAFT FORMING / CONTOUR / LEADING EDGE ROLL
HYDRAULIC STRECHFORMERBECKWOOD Triform Model SF20T-240 20 Ton x 240” Hydraulic Extrusion Stretch Forming Machine with PLC Controls & Hydraulics, sn:32726A, mfg.2014
AIRCRAFT FORMING ROLL MACHINES
FARNHAM 20’ Aircraft Forming / Contour / Leading Edge Roll with 2.75” Top Roll Diameter, 3.5” Bottom Rolls, Motorized Elevation & Drive Rolls, Jog Button & Pedestal Control, Appears in Rebuilt Condition, sn:4-41-8
FARNHAM 10’ Aircraft Forming / Contour / Leading Edge Roll with 1” Top Roll Diameter, 1.75” Bottom Rolls, Motorized Elevation & Drive Rolls, Jog & Pedestal Control, Appears in Rebuilt Condition, sn:2-43-14
CNC HIGH SPEED GANTRY ROUTERS
(2) DMS 5’ x 12’ 3-Axis CNC High Speed Gantry Routers Model 3B5i-5-12-10SCOLXX with 5’ x 12’ Vacuum Plenum Table, (Plumbed for Vacuum – No Pumps), 18” Z-Stroke, Spindle Speeds to 24,000 RPM, 8 Position ATC & FAGOR CNC Control, sn:DMS2292, mfg.2011 • sn:DMS2293, mfg.2011
1 OF 2
2011
2AVAIL.
MACHINERY INSPECTION DATE & TIME – MONDAY APRIL, 15TH FROM 8:00 A.M. - 4:00 P.M. CDT
4
CNC TOOLROOM MILLS, MILLING
MACHINES(2) HAAS TM2 3-Axis CNC Toolroom Machining Centers / Mills with #40 Taper Spindles Speed to Approx. 6,000 RPM, 40” x 16” x 16” Travels, 10 Position ATC, Coolant & HAAS CNC Pendant Controls, sn:40873, mfg.2005 • sn:37125, mfg.2004
BRIDGEPORT EZ Trak DX 3-Axis CNC Knee Mill with 9” x 48” Table, R8 Spindle Speeds to 3,600 RPM, Power Feeds, BRIDGEPORT 3-Axis D.R.O. (no motor), sn:274893
BIRMINGHAM Vertical Milling Machine with 9” x 48” Power Feed Table, R-8 Spindle Speeds to 5,440 RPM, ACU-RITE Programmable Digital Readouts, sn:100125
ENCO Variable Speed Vertical Milling Machine with R-8 Spindle Speeds to 4,200 RPM, 9” x 48” Power Feed Table, ACU-RITE Programmable Digital Readouts, sn:451022
(2) HAAS TM2 3-AXIS CNC TOOLROOM MACHINING CENTERS / MILLS
(2) DMS 5' X 12' 3-AXIS CNC HIGH SPEED GANTRY ROUTERS
Download a lot book at
www.asset-sales.com
2AVAIL.
2011
2005 20042AVAIL.
ONLINE AUCTION SALE DATE & TIME – BIDDING BEGINS TO CLOSE TUESDAY, APRIL 16TH @ 12:00 P.M. EDT
5
MONARCH 20" SWING X 48" CENTERS ENGINE LATHEMARVEL SERIES 8-MARK-II TILT-FRAME VERTICAL BANDSAW
BRIDGEPORT EZ TRAK DX 3-AXIS CNC KNEE MILL
BIRMINGHAM VERTICAL MILLING MACHINE
ENCO VARIABLE SPEED VERTICAL MILLING MACHINE
FLOW 6' X 12' 3-AXIS CNC WATER JET MACHINING CENTER
VERTICAL BANDSAW & ENGINE LATHE
MARVEL Series 8-Mark-II Tilt-Frame Vertical Bandsaw with Manual Infeed / Tilt, Work Light & Vise, sn:827656
MONARCH 20” Swing x 48” Centers Engine Lathe with 3 & 4 Jaw Chucks, Spindle Speeds to 700 RPM, Taper Attachment, 5 ‘C’ Collet Attachment, 1.75” Bore, Tailstock, sn:32681
CNC WATER JETFLOW 6’ x 12’ 3-Axis CNC Water Jet Machining Center with 60,000 PSI, 6’ x 12’ Water Table & Capacity, Pump, Hopper & CNC Pedestal Control, sn:396099, mfg.2007
2007
MACHINERY INSPECTION DATE & TIME – MONDAY, APRIL 15TH FROM 8:00 A.M. - 4:00 P.M. CDT
6
CINCINNATI 230 TON X 12' 2-AXIS CNC HYDRAULIC PRESS BRAKE
HTC 100 TON X 10' 2-AXIS CNC HYDRAULIC PRESS BRAKE
SANDERS & HYDRAULIC PRESS BRAKES(2) TIMESAVER 50” / 36” Series 2200 Metal Sanders with Variable Belt Speeds, Adjustable Thickness, sn:30286, mfg.2005 • sn:29893, mfg.2004
CINCINNATI 230 Ton x 12’ 2-Axis CNC Hydraulic Press Brake 230CB x 10FT with 10’ Between Housings, HURCO Autobend CNC Backgauge, PLC Pendant Control, Flush Floor, sn:45687
HTC 100 Ton x 10’ 2-Axis CNC Hydraulic Press Brake 100-10PB with Automec Autogauge CNC 1000 Backgauge & Control, Lazersafe Light Curtains & Pedestal Palm Button Control, sn:6923042
MISCELLANEOUS MACHINESCINCINNATI & K.O. LEE Tool & Cutter Grinders • CUTTER MASTER MG30 Tool & Cutter Grinder • Dimpler Machines • THOMPSON Surface Grinder with 12" x 24" Magnetic Chuck, sn:B514490
TIMESAVER 36" SERIES 2200 METAL SANDER
2004
ONLINE AUCTION SALE DATE & TIME – BIDDING BEGINS TO CLOSE TUESDAY, APRIL 16TH @ 12:00 P.M. EDT
7
TIMESAVER 50" SERIES 2200 METAL SANDER
CINCINNATI TOOL & CUTTER GRINDER
DIMPLER MACHINES
<3" & 4" CHUCKS
K.O.LEE TOOL & CUTTER GRINDER
CUTTER MASTER MG30 TOOL & CUTTER GRINDER
INSPECTION INFORMATIONINSPECTIONS BY APPOINTMENT ONLY &
MUST BE PRE-APPROVED,
SECURED FACILITY
INSPECTION MONDAY, APRIL 15TH ONLY
VISIT WWW.ASSET-SALES.COM
FOR FURTHER INSTRUCTIONS
CUTTER MASTER MG30 TOOL & CUTTER GRINDER
2005
Turn
ing Y
our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Florida License #AB2058 & AU2787
BECKWOOD TRIFORM SF20T-240 20 TON X 240" HYDRAULIC EXTRUSION STRETCH FORMING MACHINE
UPCOMING AUCTIONSTUESDAY, MAY 14th SIMMCOConstruction Rolling Stock, Weld & Fabricating FacilitiesOnsite / OnlineBrownsville, TN
ONLINE AUCTIONMAJOR AEROSPACE MFG.CNC & FABRICATING MACHINERY
CRESTVIEW, FLBIDDING CLOSES
TUESDAY, APRIL 16TH @ 12:00 P.M. EDT
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS
PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR
REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by Asset Sales, Inc. and Bidspotter at the time of the
auction, any person participating in the webcast auction will be bound by the following terms and conditions.
Neither Asset Sales, Inc. nor Bidspotter warrant the accuracy, authenticity, description, weight, count or
measure of any listings specified herein.
All articles will be sold to the highest webcast bidder conforming to the bid process in accordance to the
AUCTION COMPANY’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-
SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removed in
the time allocated by Asset Sales, Inc.. No item, no matter how small or how far the purchaser has to travel,
may be removed until after the online auction is completely closed.
All payments shall be by wire transfer. All bidding and invoicing will be in US Dollars ($).
All bidders are responsible for all applicable taxes, in addition a 18% Buyer’s Premium is implemented for all
online sales.
Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by the
posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is
complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales,
Inc. as the insured.
ALL ONLINE SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.
REGISTRATION & BIDDING ONLINE:
When participating as a buyer via Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-
approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agree-
ment to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A
MINIMUM DEPOSIT OF $5000 TO BE APPROVED.
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
2014