0.72 hrs
2 pcs
f
0.15 mm
k
0.40 mm
h
1
7.00 g
d
MK3/S
Summary
Star Wars Jedi Order Extruder Visualizer 3D printed in 2 colors, white andblack.
I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert afilament change command in the G-code so I could change the color. It canbe done very easily in the PrusaSlicer.
I separated the magnet post so I could print without supports. The postneeds to be glued to the back with super glue.
The magnet used is 6.3 mm diameter by 3 mm thickness. They werepurchased from Michaels Craft Store.
3D Printers > Other Accessories
jediorder visualizer starwars rebel jedi extruder
zarehz
Star Wars JediOrder ExtruderVisualizer
VIEW IN BROWSER
updated 27. 3. 2020 | published 27. 3. 2020
Print Files (.gcode) DOWNLOAD ALL FILES
981.3 KB
0.64 hrs f 0.15 mm k 0.40 mm h PLA 7.00 g d MK3/S
updated 27. 3. 2020
253.7 KB
0.08 hrs f 0.15 mm k 0.40 mm h PLA 0.30 g d MK3/S
updated 27. 3. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
129.6 KBupdated 27. 3. 2020
Printer brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: .15 mm
Infill: 15%
Filament_brand: Prusament
Filament_color: Vanilla White & Prusa Galaxy Black
Filament_material: PLA
Notes: Added brim for the magnet post so it would have more surface areato stick to the print bed. Also, the post prints at 100% infill.
Post-Printing Magnet Post need to be super glued to the back. Magnetneeds to be supper glued to the post.
jedi_order_emblem_v2_015mm_pla_mk3s_38m.gcode
jedi_order_stand_v2_015mm_pla_mk3s_5m.gcode
jedi_order_emblem_v2.stl
228.8 KBupdated 27. 3. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
jedi_order_stand_v2.stl