Test Results for Cisco Unified Communications Solution Release 11.5for JapanFirst Published: July 12, 2016
Last Modified: July 14, 2016
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
© 2016 Cisco Systems, Inc. All rights reserved.
C O N T E N T S
C H A P T E R 1 Cisco Unified Communications System Test 1
Cisco Unified Communications System Test 1
Cisco Unified Communications System Test for Japan 2
Acronyms 3
C H A P T E R 2 Test Topology and Environment Matrix 11
Test Topology 12
Environment Matrix 13
Open Caveats 18
What's New? 19
C H A P T E R 3 Test Results Summary 29
Cisco Unified Communications Manager 29
Cisco Unity Connection 35
Cisco Unified Communications Manager IM & Presence Service 38
Cisco IP Phone 40
Cisco Jabber for iPhone and iPad 45
Cisco Jabber for Android 52
Cisco Jabber for Windows 65
Cisco Jabber for Mac 72
Cisco Spark 79
Cisco Jabber Guest 83
Cisco TelePresence Video Communication Server 89
Cisco TelePresence Multipoint Control Unit 130
Cisco TelePresence Management Suite 138
Cisco TelePresence Conductor 145
Cisco TelePresence Server 155
Cisco TelePresence Content Server 167
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan iii
Cisco Prime Collaboration 175
Cisco Prime Collaboration Analytics 175
Cisco Prime Collaboration Assurance 197
Cisco Prime Collaboration Provisioning 216
Related Documentation 259
Test Results for Cisco Unified Communications Solution Release 11.5 for Japaniv
Contents
C H A P T E R 1Cisco Unified Communications System Test
• Cisco Unified Communications System Test, page 1
• Cisco Unified Communications System Test for Japan, page 2
• Acronyms, page 3
Cisco Unified Communications System TestCisco Unified Communications Solution Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified system-level solution for the various products and platforms inthe Cisco Unified Communications System.
Cisco Unified Communications Solution Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams, when combined, improves theUnified Communications System software quality. This is achieved by testing the different components.
The requirements for Cisco Unified Communications Solution Test is derived based on the following:
• Popular customer scenarios
• Input from various Business Units, fields and Cisco Services
The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as a part of Cisco UnifiedCommunications Solution Test are:
• Interoperability/Compatibility
• Functionality
• Availability/Reliability/Stability
• Performance/Scalability/Capacity
• Usability/Serviceability
• Special focus area - CAP (Customer Assurance Program)/Technical Assistance Center (TAC)
• Security
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 1
Cisco Unified Communications System Test for JapanCisco Unified Communications Solution Test for Japan, in turn is an add-on testing at the solution level,where the requirements gathered are specific to Japanese usage and market. The requirements are derivedbased on the following:
• Customer found defects in selected UC products
• High priority cases that are covered by the Cisco Unified Communications Solution Test team
• Inputs from SE's and TAC team of Cisco Japan
The test execution is carried out on selected UC products, which affects the Japanese segment and that areprioritized by SE's of the Cisco Japan team. Japanese specific equivalents such as Japanese locale, ISDNSwitch type being NTT and JPNP for Numbering Plan are implemented.
The objective of Cisco Unified Communications Solution Test for Japan is to run a sub-set of solution testingthat is not covered by Cisco Unified Communications Solution Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, selected Cisco Compatible Products and third partyequipment.
In this Cisco Unified Communications Solution Test release for Japan, the following components are tested.
• Cisco Unified Communications Manager
• Cisco Unity Connection
• Cisco Unified Communications Manager IM & Presence Service
• Cisco IP Phones
• Cisco Jabber for iPhone and iPad
• Cisco Jabber for Android
• Cisco Jabber for Mac
• Cisco Jabber for Windows
• Cisco Spark
• Cisco Unified Survivable Remote Site Telephony
• Cisco TelePresence Video Communication Server
• Cisco TelePresence Video Communication Server Expressway
• Cisco TelePresence Content Server
• Cisco TelePresence Multipoint Control Unit
• Cisco TelePresence Management Suite
• Cisco TelePresence Conductor
• Cisco TelePresence Server
• Cisco Jabber Guest
• Cisco Prime Collaboration
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan2
Cisco Unified Communications System TestCisco Unified Communications System Test for Japan
AcronymsDescriptionAcronym
Advanced Audio Coding - Low DelayAAC-LD
Automated Alternate RoutingAAR
Automatic Call DistributionACD
Alternate Contact NumberACN
Active DirectoryAD
Automatic Gain ControlAGC
Audible Message Waiting IndicatorAMWI
Alternate Network Address TranslationANAT
Access PointAP
Adaptive Security ApplianceASA
American Standard Code for Information InterchangeASCII
Analog Telephone AdapterATA
Bulk Administration ToolBAT
Business EditionBE 6000H
Binary Floor Control ProtocolBFCP
Busy Lamp FieldBLF
Basic Service Set IdentifierBSSID
Certificate AuthorityCA
CDR Analysis and ReportingCAR
Channel Associated SignalingCAS
Cisco Administrative XMLCisco AXL
Call Control DiscoveryCCD
Cisco Desktop AdministratorCDA
Cisco Discovery ProtocolCDP
Call Detail RecordCDR
Caller Entered DigitsCED
Call Forward AllCFA
Call Forward BusyCFB
Call Forward No AnswerCFNA
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 3
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Call Forward UnregisteredCFUR
Cisco Jabber for AndroidCJA
Cisco Jabber for iPhoneCJI
Cisco Jabber for MacCJM
Cisco Jabber for iPadCJIPad
Cisco Jabber for WindowsCJW
Command Line InterfaceCLI
Calling Line IdentificationCLID
Client Matter CodeCMC
Call Management RecordCMR
Cross-Origin Resource SharingCORS
Clustering over WANCoW
Cisco Prime CollaborationCPC
Client Services FrameworkCSF
Cisco Collaboration Systems ReleaseCSR
Cross Site Request ForgeryCSRF
Calling Search SpaceCSS
Computer Telephony InterfaceCTI
Computer Telephony IntegrationCTI
Certificate Trust ListCTL
Cisco Unified Border ElementCUBE
Cisco Unity ConnectionCUC
Cisco Unified Communications ManagerCUCM
Cisco Unified PresenceCUP
Cisco Unified Customer Voice PortalCVP
Cisco WebEx Meetings ServerCWMS
Directed Call ParkDCP
Device and Credential RepositoryDCR
Dynamic Host Configuration ProtocolDHCP
Direct In-Ward DialingDID
Directory NumberDN
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan4
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Dialed Number AnalyzerDNA
Do Not DisturbDND
Domain Name ServerDNS
Delayed OfferDO
Digital Private Network Signaling SystemDPNSS
Disaster Recovery SystemDRS
Differentiated Services Code PointDSCP
Device Work CenterDWC
Elliptical Curve Digital Signature AlgorithmECDSA
Extended Display Identification DataEDID
Emergency Location Identification NumberELIN
Enterprise License ManagerELM
Extension MobilityEM
Extension Mobility Cross ClusterEMCC
Early OfferEO
Cisco Enhanced Survivable Remote Site TelephonyE-SRST
Extract Transform LoadETL
Forced Authorization CodeFAC
Federal Information Processing StandardsFIPS
Fully Qualified Domain NameFQDN
Foreign Exchange OfficeFXO
Foreign Exchange StationFXS
Graphical User InterfaceGUI
GatewayGW
High AvailabilityHA
High DefinitionHD
Historical ReportingHR
Cisco Hosted Collaboration SolutionHCS
Hyper Text Markup LanguageHTML
Hypertext Transfer ProtocolHTTP
Hypertext Transfer Protocol SecureHTTPS
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 5
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Inter Cluster TrunkICT
Identity ProviderIdP
Instant MessagingIM
IP Phone MessengerIPPM
IP Service Level AgreementsIPSLA
Integrated Services Digital NetworkISDN
Indian Standard TimeIST
Initial Trust ListITL
Interactive Voice ResponseIVR
Key Expansion ModuleKEM
Log Collection CenterLCC
Lightweight Directory Access ProtocolLDAP
Light Emitting DiodeLED
Media Convergence ServerMCS
Multipoint Control UnitMCU
Multi-Device MessagingMDM
MultiDimensional eXpressionsMDX
Managed File TransferMFT
Media Gateway Control ProtocolMGCP
Multilevel Precedence and PreemptionMLPP
Music On HoldMOH
Mobile and Remote AccessMRA
Media Resource Group ListMRGL
Managed Service ProviderMSP
Maximum Transmission UnitMTU
Message Waiting IndicatorMWI
Network Application ManagementNAM
Network Address TranslationNAT
Network Interface and Configuration EngineNICE
Non Linear ProcessingNLP
New Technology LAN Manager version 2NTLMv2
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan6
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Network Time ProtocolNTP
One Button To PushOBTP
Operations ManagerOM
On Screen DisplayOSD
Peer-to-PeerP2P
Product Authorization KeyPAK
Personal Communication AssistantPCA
Prime Collaboration DeploymentPCD
PC over IPPCoIP
Personal Identification NumberPIN
Personal MultipartyPMP
Plain Old Telephony SystemPOTS
Primary Rate InterfacePRI
Provisioning Northbound InterfaceProvisioning - NBI
Problem Reporting ToolPRT
Public Switched Telephone NetworkPSTN
Quality Report ToolQRT
Q-Signaling protocolQSIG
Route GroupRG
Remote Desktop ProtocolRDP
Really Simple SyndicationRSS
Real Time Control ProtocolRTCP
Real Time Monitoring ToolRTMT
Realtime Transport ProtocolRTP
Security Assertion Markup LanguageSAML
Skinny Client Control ProtocolSCCP
Severely Conceal Seconds RatioSCSR
Standard DefinitionSD
Selsius Ethernet PhoneSEP
Secure File Transfer ProtocolSFTP
Session Initiation ProtocolSIP
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 7
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Small and Midsize BusinessSMB
Shared MultipartySMP
Short Message ServiceSMS
Simple Network Management ProtocolSNMP
Simple Mail Transfer ProtocolSMTP
Cisco Unified Survivable Remote Site TelephonySRST
Secure ShellSSH
Service Set IdentifierSSID
Secure Socket LayerSSL
Single Sign OnSSO
Technical Assistant CenterTAC
Transmission Control ProtocolTCP
TelePresence Content ServerTCS
Transport Layer SecurityTLS
TelePresence Management SuiteTMS
TelePresence Management Suite Provisioning ExtensionTMSPE
Time of Day RoutingTODR
Cisco TelePresence ServerTPS
Trust Relay PointTRP
TelePresence ServerTS
Telephony User InterfaceTUI
Unified Computing SystemUCS
User Datagram ProtocolUDP
User Data ServicesUDS
Unified Messaging GatewayUMG
Cisco Unified Communications ManagerUnified CM
Uniform Resource IdentifierURI
Coordinated Universal TimeUTC
Cisco TelePresence Video Communication ServerVCS
Voice GatewayVGW
Virtual MachineVM
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan8
Cisco Unified Communications System TestAcronyms
DescriptionAcronym
Voice Mail NotificationVMN
View Mail for OutlookVMO
Voice over IPVoIP
Voice Profile for Instant MessagingVPIM
Virtual Private NetworkVPN
Video SLA Assessment AgentVSAA
TelePresence Server on VMVTS
Wide Area NetworkWAN
Wireless FidelityWi-Fi
Extensive Application Programming InterfacexAPI
Extensible Markup LanguageXML
Extensible Messaging and Presence ProtocolXMPP
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 9
Cisco Unified Communications System TestAcronyms
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan10
Cisco Unified Communications System TestAcronyms
C H A P T E R 2Test Topology and Environment Matrix
• Test Topology, page 12
• Environment Matrix, page 13
• Open Caveats, page 18
• What's New?, page 19
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 11
Test TopologyFigure 1: Topology in Use
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan12
Test Topology and Environment MatrixTest Topology
Environment MatrixVersionComponentApplications
11.5.0.99837-3VersionCisco UnifiedCommunications Manager
Call Control
11.5.2.9902-201Locale
3-1-9.JPDial Plan
10.5VersionCisco Unified SurvivableRemote Site Telephony(SRST) 15.6.2 TIOS
X8.8 Alpha 5VersionCisco Telepresence VideoCommunication ServerExpressway (VCSExpressway)
vcs-lang-ja-jp_8.5-1_amd64.tlpLocale
X8.8 Alpha 5VersionCisco TelePresence VideoCommunication Server(VCS) vcs-lang-ja-jp_8.5-1_amd64.tlpLocale
11.5.0.99837-2VersionCisco UnifiedCommunications ManagerIM and Presence Service
Applications
11.5.0.9901-17Locale
11.5.0.99837-3VersionCisco Unity ConnectionVoice Mail andUnified Messaging
11.5.0.1-295Locale
11.5.69010VersionCisco Prime CollaborationAssurance & Analytics
NetworkManagement
11.2.0.523VersionCisco Prime CollaborationProvisioning
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 13
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
11-0-1-11Cisco IP Phone7811/21/41/61
End Point
9-4-2SR1-1Cisco Unified IP Phone7942/62/75
1-4-7-3Cisco Unified Wireless IPPhone 7925/26
10-3-1SR2-2Cisco Unified IP ConferencePhone 8831
11-0-1-11Cisco IP Phone8811/41/45/51/61/65
11-0-2HER-56Cisco IP Phone 8821
9-4-2SR2-2Cisco Unified IP Phone8941/45
9-4-2SR2-2Cisco Unified IP Phone9951/71
TC7.3.6EX60 - Cisco TelePresenceSystem EX60
TC7.3.6EX90 - Cisco TelePresenceSystem EX90
CE 8.1.1SX20 - Cisco TelePresenceSX20 Quick Set
CE 8.1.1SX80 - Cisco TelePresenceSX80 Codec
CE 8.1.1SX10 - Cisco TelePresenceSX10 Quick Set
TC 7.3.6C90 - Cisco TelePresenceSystem Integrator PackageC90
TX6.1.11(1)500-32 - Cisco Tele PresenceSystem 500 - 32
TX6.1.11(1)TX9000 - CiscoTelePresenceSystem TX9000
CE 8.1.1MX200-G2 - CiscoTelePresence MX200-G2
CE 8.1.1MX300-G2 - CiscoTelePresence MX300-G2
IX8.1.1(59)
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan14
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
IX5000 - Cisco TelePresenceIX5000
10.2.5DX650 - Cisco DX650
10.2.5DX70 - Cisco DX70
10.2.5DX80 - Cisco DX80
CE 8.2.0 pre Alpha 3Cisco TelePresence DX70
CE 8.2.0 pre Alpha 3Cisco TelePresence DX80
15.6.2 TIOSISR Gateways (3945e,3925e, 3945, 2921)
CommunicationsInfrastructure
3.16.2SIOSISR 4451-X
15.6.2 TCisco Unified BorderElement for ISR
15.0.2-SE 5Cisco 3750 PoE Switch
ESXi 5.1.0 , 5.5.0vCenter Server
5.2(2 a)M9500MDS Switch
15.2.1VersionCisco TelePresenceManagement Suite - TMS
TelePresence
4.5 (1.85)VersionMCU 4510, 5310 and 5320- Cisco TelePresence MCU
MCU_4-3_UI_and_audio_JPN.packageLocale
4.3(1.13)VersionCisco TelePresence Server
XC4.2VersionCisco TelePresenceConductor
4.3(1.13)VersionCisco TelePresence Server7010
v7.1 Build 4262VersionCisco TelePresence ContentServer
S5.0_language_packs.zipLocale
15.3VersionWireless Access Point 1142Wireless andMobility
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 15
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
11.7.0.236049VersionCisco Jabber for MacMessagingApplications
11.6.0.35037VersionCisco Jabber for Windows
11.6.1.236312 - 64 bit (iPhone5 andiPad)
VersionCisco Jabber for iOS
11.6.1.236312 - 64 bit (iPhone6 andiPhone6S)
Apple iOS 9.3.2(13F69)iPhone 5/6/6S
Apple iOS 9.3.2(13F69)iPad
Apple iOS 9.3.2(13F69)iPad Pro/Air
Apple iOS 2.2.1(13V420)Apple Watch
11.6.0.236802VersionCisco Jabber for Android
Android OS 5.0.1Galaxy S4
Android OS 6.0.1Galaxy S6
Android OS 5.0.2XperiaZ1/Z3/Z3+
Android OS 6.0.1Nexus 5X
Android OS 5.1.1Sony Tab
Android OS 5.1.1Sony Watch
10.6.9.13Version forWindows
Cisco Jabber Guest
Windows OS 7Windows
10.6.9.17Version for Mac
Mac OS 10.10.5Mac
10.6.9.30Version for iOS
Apple iOS 9.1 (13B143)iPhone 5/6
Apple iOS 9.2(13C75)iPad
10.6.9.51Version forAndroid
Android OS 5.0.1Galaxy S4
Android OS 5.0.2Xperia Z1
1.0.0.3021Version forWindows
Cisco Spark
1.3506Version for Mac
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan16
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
Version for iOS 1.26(13325)
Apple iOS 9.1 (13B143)iPhone 5/6
Apple iOS 9.2(13C75)iPad
1.10.2382Version forAndroid
Android OS 5.0.1Galaxy S4
Android OS 5.0.2Xperia Z1
4215Version forWeb
2.2(3d)CiscoUCS6140Fabric InterconnectPRIMARY
UCS
2.2(3d)CiscoUCS6140Fabric InterconnectSUBORDINATE
2.2(3d)CiscoUCS6140Fabric Cluster
ESXi 5.1.0, 5.5.0B-Series ServerESXi Host
ESXi 5.1.0, 5.5.0 and 6.0C-Series Server
Windows 7-SP1 (Japanese)Windows 7-SP1Operating SystemClient
Windows 8/8.1 (Japanese)Windows 8/8.1
Windows 10 (Japanese)Windows 10
10.10.5 (Japanese)Mac
IE 10, 11 (Supported Japaneselanguage)
IEBrowser
Firefox 44.0, 45.0, Firefox ESR 31,38 (Supported Japanese language)
Mozilla
Chrome 48 or later (SupportedJapanese language)
Chrome
8.0.8, 9.0Safari
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 17
Test Topology and Environment MatrixEnvironment Matrix
VersionComponentApplications
Windows Server 2008 (R2 Enterprise- Japanese)
Microsoft Windows ServerServer
Windows Server 2012 (R2 Enterprise- Japanese)
2013 SP1Microsoft Exchange Server
2.5.1.28.BCisco WebEx MeetingsServer
11.0.1.10000-103Cisco MediaSense
10.6.11Jabber Guest
Open CaveatsTitleDefect ID
Cisco IP Phone
Feature is unavailable message is displayingCSCuz14699
Phone URL Page not displaying Network Locale versionCSCuz82110
Alert Name and Display ID is not displayed in 8821 PhoneCSCuz85661
Cisco Jabber for Android
During group chat notification is getting from CJW when CJA "DND"status
CSCuz83408
Customizing in custom user text is taking Unlimited words (text words)CSCuz85024
Cisco TelePresence Video Communication Server
Hold information not displayed in DX Series phonesCSCux25293
Shows far end call is been hold in call participant tab (DX70)CSCuz71479
Japanese display name is not displayed in DX70 with Japanese localeCSCuz80132
Background screen goes blackwhen language changed during call in DX80CSCux51519
Call is not muted while retrieving (EX90) first line in share LineCSCuz75359
Locale Changes automatically while user has logout of TCSCSCuz53989
Mute notification is not displayed in SX10 Quick setCSCuz81984
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan18
Test Topology and Environment MatrixOpen Caveats
What's New?Cisco Spark
Cisco Spark helps modern teams work together. Sign in to create rooms with groupmessaging, content sharing,video calling, and desktop sharing. Instant workspaces for your teams. Add files to group and 1-to-1 chat.Tap and it's a video call. Share your screen any time. Things get done fast with Cisco Spark. Keep it runningon all your devices and get notified when people add to the conversation. Short on time? Run a search or usefilters to see where you're needed most.
Cisco IP Phone 8821/8845/65
The Cisco IP Phone 8821/8845/65 is highly affordable and secure, and easy to use. Employees can also takeadvantage of telephony integration with their personal mobile devices, providing them with more flexible andconvenient ways of working. In addition to video calls, Cisco IP Phone 8821/8845 and 8865 function muchlike a digital business phone, allowing you to place and receive calls and to access basic features such as mute,hold, transfer, speed dial, call forward and more.
Cisco Prime Collaboration Provisioning 11.5
Quick Service Provisioning for Existing Users
The Quick Service Provisioning feature offers an easy and quick way to provision services for existing userswithout going through the legacy ordering wizard that has multiple steps. A new dialog box called ProvisionServices is included in the User Provisioning page to perform quick service provisioning for existing users.In addition, a new button calledCustom ServicesWizard in the user record page allows the users to provisionthe services in the legacy way.
Unified Communications Device Support
The following versions of the Unified Communications devices are newly supported:
• Cisco Unified Communications Manager 11.5
• Cisco Unity Connection 11.5
• Cisco IM and Presence 11.5
• Cisco Unified Communications Manager Express 11.5
• Cisco Unity Express 11.5
Root Access
Root access is disabled from Cisco Prime Collaboration 11.5. As a result, many procedures requiring rootaccess, can now be performed from the user interface.
Process Management
Using process management you can restart services such as Apache, JBOSS, and NICE from user interface.You have option to reboot linux server and restart Cisco Prime Collaboration Provisioning application fromuser interface. Process management also lists the details such as the restart history to view when and wherestarted the service.
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 19
Test Topology and Environment MatrixWhat's New?
Scheduled Synchronization
The Scheduled Synchronization command line script utility is now migrated to user interface. Using schedulesynchronization you can schedule periodic processor and domain synchronization from UI. In addition, youcan edit and delete existing synchronization jobs and view details such as the job status, synchronization statusand so on.
SSL Certificate- Enhancements
In Cisco Prime Collaboration Provisioning you can generate, download, and view the certificates. You canalso upload provisioning and LDAP certificates.
Cisco TelePresence MCU 5320
Cisco TelePresence MCU 5320 is a range of technology advanced and Powerful Multipoint control unitsdesigned to combine continues presence at high definition and the highest possible voice quality. MCU canbe clustered and has a flexible port capacity allowing scalability, it provides an entry-level appliance andflexible port that enables your video deployment to grow as your telepresence usage accelerates. Compatiblewith all major vendors standard- and high-definition (SD and HD, respectively) endpoints, it delivers the bestexperience for each participant, every time.
Cisco MCU 5320 platform supports 40 HD ports video and 20 Full HD ports video. Easy to use and versatilemanagement interface.it provides upscale SD resolution using cisco clear vision technology it is compatiblewithMicrosoft office communication server via cisco telepresence video communication server. It is predictableport capacity and bandwidth per site up to 4 Mbps.
Cisco TelePresence Content Server
The Cisco TelePresence Content Server simplifies the process of capturing and sharing many types of contentthroughout your organization. It includes training sessions, meetings and any critical events. With CiscoTelePresence Content Server your organization can record and stream high quality video and content for liveand on demand access.
You can also distribute your content, live or record, to any PC or portable media device or to Cisco Show andShare. Based on industrial standards, the TelePresence Content Server interoperates with Cisco and third partyH.323 and Session Initiation Protocol (SIP) based video endpoints and multiparty bridges Cisco TelePresenceServer and Cisco TelePresence multipoint control units (MCUs) can connect to it, as well, to enable live andon-demand video streaming.
It captures video and presentations for live streaming and video-on-demand viewing, compatible with CiscoTelePresence or third party standards based video endpoints. It allows for basic video editing and sharingfunctionality using simple web interface.
Cisco TelePresence IX5000
The Cisco TelePresence IX5000 Series is the industry's first H.265 triple-screen product. Participants canshare multiple content sources on three 70-inch LCD screens. 4K cameras can "unskew" video images inwhiteboard mode for remote participants, allowing flexible whiteboard placement. Stand-up mode letsparticipants move about the room. The IX500 features a sleek, new industrial design that's inviting and easyto use. Integrated lighting delivers superior video images, eliminating the need for external light reflectorsand room remediation.
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan20
Test Topology and Environment MatrixWhat's New?
Cisco Business Edition 6000
Cisco BE6000 platforms are built on virtualized Cisco Unified Computing System™ (Cisco UCS® ) products,which are designed for performance and density over a wide range of company sizes and business workloads.There are three models:
• BE6000H: Supports nine collaboration application options in a single virtualized server platform;maximum capacity of 1000 users, 2500 devices, and 100 contact center agents. Ideal for medium-scaleend-to-end collaboration deployments
• BE6000M: Supports five collaboration application options in a single virtualized server platform;maximum capacity of 1000 users, 1200 devices, and 100 contact center agents. Ideal for medium-scaleend-to-end collaboration deployments
• BE6000S: Supports five fixed collaboration applications on an integrated router/gateway/virtualizedblade server platform; maximum capacity of 150 users and 300 devices. Ideal for small-scale "office ina box" collaboration deployments
The Cisco BE6000 is a packaged solution that comes pre-loaded with virtualization and applications softwareand is pre-configured with core UC applications. Simply turn on additional collaboration applications as yourbusiness needs grow.
Cisco Business Edition 7000
Cisco BE7000 platforms are built on virtualized Cisco Unified Computing System™ (Cisco UCS®) products,which are designed for performance and density over a wide range of business workloads
• BE7000M: this medium-density model typically supports between four to six collaboration applicationsin deployments sized for 1000 to 5000 users, 3000 to 15,000 devices, and multiple sites. For morecapacity to support larger sized deployments, simply stack additional servers. And in smaller sizeddeployments with less than 1000 users, typically more applications can be supported per server
The enterprise-class Cisco UCS C240 M4 Rack-Mount Server family packages advanced performance withenergy efficiency of the Intel Xeon processor E5-2600 v3 product family in a 2-rack-unit (2RU) form factor.BE7000 platformmodels ship with a preinstalled virtualization hypervisor and preloaded software applicationsthat are ready to deploy.
Test Coverage
New FeaturesComponents
Search & Show Display Name fieldCisco Unified CommunicationsManager
Common PIN UCM & UxN
Directory Search LDAP for Edge clients
Location-Based Service on UCM
Product RebrandingCisco TelePresence VideoCommunication Server
Virtual Machine
Serviceability/Operational Enhancement
Common PIN Unity ConnectionCisco Unity Connection
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 21
Test Topology and Environment MatrixWhat's New?
Schema with enhancements for both UCM and IM&PCisco Unified CommunicationsManager IM & Presence Service
GE Phase II for UCM (Tomcat, SIP Proxy for IMP, XMPP)
AD Group Support for IM/P Roster
Long Line LabelCisco IP Phone
DND Status Display
Call Barge in 78xx
New Font and Font Size Change
Add VM Audio Back
Call Barge in 88xx
Broadcast IMCisco Jabber for Windows
Chat alert sound menu
Windows 10 support - Jabber for Windows (Outlook/ Exchange/WebEx)
Multi-Device Messaging (MDM)
Hunt groups
Custom/HTML TabsCisco Jabber for Mac
Locations
Group Pickup
Persistent Chat - Administration and Management
Alert when Available
Broadcast IM
Call With Edit
Custom Ringer
Hunt groups
User name Read only at Sign-in
Multi-Device Messaging (MDM)
Persistent Chat Room Discovery and Enrolment
Persistent chat HA Support
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan22
Test Topology and Environment MatrixWhat's New?
Broadcast IMCisco Jabber for iPhone and iPad
Default Audio Output
Jail break
Multi device messaging for Cloud
Expanded Device Support
App on Apple Watch
iOS 9 Support
Admin settings to change the default behavior of a contacts
Support 3D touch on home screen (iPhone 6S)
Support 3D touch on Chats (iPhone 6S)
Chat with Dictation (Apple Watch)
Jabber in Glances screen (Apple Watch)
Broadcast IMCisco Jabber for Android
Default Audio Output
Jail break
Custom Ringtone
Notification on Android Wear and Reply IM Message
Android Wear Improvement
Admin settings to change the default behavior of a contacts
More Emoticons [CSCuq16032]
UE improvement on CMR/ PMR meeting
Enable PRT configuration via bootstrap
Multi-Device Messaging (MDM)
1:1 Chat and Group ChatCisco Spark
Video Call
Screen Sharing
File Sharing
Cloud Extensions and Calendar Fusion Service
Call Connector Fusion Service
@mentions
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 23
Test Topology and Environment MatrixWhat's New?
Opus Codec SupportCisco Jabber Guest
Content Share Statistics
Start Call without Video
Auto Start Call
1080p presentation locally and in call (SX10)Collaboration Endpoint Software
Support for OSD active mode (SX20)
Warning on screen regarding Touch 8” and TRC-5 (SX20)
Support for WUXGA(SX80)
MultiStream Conferencing (Hybrid)
Full Cisco Proximity support
OSD and Touch UI refresh (Symphony)
In-Room Control
Multistream Support
Presenter Track
Full screen audio avatar removed
Encrypted iX support
Proximity sharing of mouse pointer
Direct sharing to far end
Minor New Features:
List of discontinuations in CE8.0.0 from TC7.3.x
New Microphone LED behaviour
Setup Assistant requires authentication
API changes
Remote monitoring (web snapshots)
UI changes in active mode
Measure ultrasound-pairing quality using the VU meter
Provision endpoints to use HTTPS only from CUCM
Snap to Whiteboard improvements
Touch UI Update
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan24
Test Topology and Environment MatrixWhat's New?
Access to call statisticsCisco DX Series
Contacts search
HDMI Audio
SIP URI
Stay in PC mode
USB Redirect
Use the System While an Outgoing Call is Ringing
Alternate Phone Book Server
FIPS mode
Support Active Meeting ManagerCisco TelePresence Conductor
New Page under Conference Configuration
Usage Reporting and Statistics Collection
2048-bit Encryption
Localization / Internationalization
Temporary Multi-Party Licensing
Multi-Party License Compliance Banner
Increased 410v capacityCisco TelePresence Server
Changes to vTS operating system
Customizable audio prompts
New lobby screen image
New PIN entry process
Presenter Icon
Streamlined conference entry
Customizable lobby screen
New audio prompts
Conductor FailoverCisco TelePresence Management Suite
Support for CE endpoints running CE8.2
Support for ESXi 6.0
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 25
Test Topology and Environment MatrixWhat's New?
Upgrade Support from 11.0, 11.1 to 11.2Cisco Prime Collaboration Provisioning
Support Activate/Deactivate Serviceability on CUCM throughBatch
Add Access Control in User Provisioning
Support Service Activation on IM&P through Batch
Enterprise Phone Configuration
UC Communication Enhancements
Default values for EM Templates
Security FIPS Gap Closure
Keyword Feature
Support Enterprise Parameter via Batch
Batch Ordering Continue on Failure on Day 2 Object
Notification Devices Provisioning for CUC
Fix LDAP import and filtering gaps requests
Security: Address FIPS gapsCisco Prime Collaboration Assurance
New device support
Prime collaboration essential for BE
QIP Enhancements
MSP Mode NAT Setup-New scenario for HCS
CSR 11.5 Device support
MSP mode-Access only to reports
Support upgrade from Cisco Prime Collaboration Assurance 10.xand 11.0 to 11.5
RTMT Parity and phone data collection Enhancement
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan26
Test Topology and Environment MatrixWhat's New?
Menu changesCisco Prime Collaboration Analytics
CSR 11.5 Device Support
Engineering Enhancements
Analytics for HCS Requirements
Prime Collab Analytics for BE
Improve Dashboard, Dashlet and ETL process Performance
Voice Conference and Capacity Analysis Enhancements
Service Experience Enhancement
Busy hour Trunk/RG call volume
Jabber Analytics
Before You Begin
Cisco Jabber for Mac
It is noticed that sometime text editor can cause problem while editing jabberLocalConfig.xml file. Somake sure to use TextWrangler or Xcode when editing this file.
Note
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 27
Test Topology and Environment MatrixWhat's New?
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan28
Test Topology and Environment MatrixWhat's New?
C H A P T E R 3Test Results Summary
• Cisco Unified Communications Manager, page 29
• Cisco Unity Connection, page 35
• Cisco Unified Communications Manager IM & Presence Service, page 38
• Cisco IP Phone, page 40
• Cisco Jabber for iPhone and iPad, page 45
• Cisco Jabber for Android, page 52
• Cisco Jabber for Windows, page 65
• Cisco Jabber for Mac, page 72
• Cisco Spark, page 79
• Cisco Jabber Guest, page 83
• Cisco TelePresence Video Communication Server, page 89
• Cisco TelePresence Multipoint Control Unit, page 130
• Cisco TelePresence Management Suite, page 138
• Cisco TelePresence Conductor, page 145
• Cisco TelePresence Server, page 155
• Cisco TelePresence Content Server, page 167
• Cisco Prime Collaboration, page 175
• Related Documentation, page 259
Cisco Unified Communications ManagerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 29
PassedNAVerify that display namesection should be blankif there is no previouslysaved display name indatabase in generalsettings page in CiscoUnifiedCommunicationsSelf Care Portal
Display namesection shouldbe blank inself care portal
UCJ11.5S.CUCM.G.001
PassedNAVerify user ID on the topright corner of thegeneral settings pageafter successful login inCisco UnifiedCommunications SelfCare Portal
Display ofuser ID in selfcare portal
UCJ11.5S.CUCM.G.002
PassedNAVerify the IM andAvailability of self careportal after successfullogin in Cisco UnifiedCommunications SelfCare Portal
IM andAvailability ofself care portalaftersuccessfullogin
UCJ11.5S.CUCM.G.003
PassedNAVerify my additionalPhones functionality ofself care portal aftersuccessful login to CiscoUnifiedCommunicationsSelf Care Portal
AdditionalPhonefunctionalityin self careportal
UCJ11.5S.CUCM.G.005
PassedNAVerify the ring settingsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal
Ring settingsfunctionalityof Self CarePortal aftersuccessfullogin
UCJ11.5S.CUCM.G.006
PassedNAVerify the voice mailnotificationsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal
Voice MailNotificationsfunctionalityof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.007
PassedNAVerify call forwardingfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal
CallForwardingfunctionalityof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan30
Test Results SummaryCisco Unified Communications Manager
PassedNAVerify whether theLDAP search is enabledor not under LDAPsearch for enterpriseusers through UDS inCisco UnifiedCommunicationsManager using single UI
LDAP searchin Unified CM
UCJ11.5S.CUCM.G.009
PassedNAVerify the LDAP searchpasswords match in boththe fields (LDAPpassword and confirmpassword) should matchin Cisco UnifiedCommunicationmanagerusing single UI
LDAP searchpassword inUnified CM
UCJ11.5S.CUCM.G.010
PassedNAVerify whether the viewdetails link navigates toUC service profile pageadded in Cisco UnifiedCommunicationsManager using single UI
View detailslink in LDAPSearch
UCJ11.5S.CUCM.G.011
PassedNAVerify display namesection in generalsettings of self careportal after successfullogin for LDAP synceduser
Display namesection ingeneralsettings of selfcare portal
UCJ11.5S.CUCM.G.012
PassedNAVerify enable user searchcheck box is unchecked,the admin is not allowedto configure anything onthe Cisco Unified OSAdministration page
Enable usersearch checkbox isunchecked inLDAP Search
UCJ11.5S.CUCM.G.013
PassedNAVerify the create tar filename and selectedparticular importfunctionality
Tar file forimport of bulkadministrationin Unified CM
UCJ11.5S.CUCM.G.014
PassedNAVerify the create tar filename and selectedparticular importfunctionality withoverride
Tar file forimport withoverride ofbulkadministrationin Unified CM
UCJ11.5S.CUCM.G.015
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 31
Test Results SummaryCisco Unified Communications Manager
PassedNAVerify phone contactsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal
Phone contactsfunctionalityof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.016
PassedNAVerify downloadsfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal
Downloadsfunctionalityof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.017
PassedNAVerify self careenterprise parameterfunctionality of self careportal after successfullogin to Cisco UnifiedCommunications SelfCare Portal
Self-careenterpriseparameterfunctionalityof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.018
PassedNAVerify filter-byfunctionality for speeddial of self care portalafter successful login toCisco UnifiedCommunications SelfCare Portal
Filter-byfunctionalityfor speed dialof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.019
PassedNAVerify filter-byfunctionality of voicemail notifications ofCisco UnifiedCommunications SelfCare Portal aftersuccessful login
Filter-byfunctionalityof voice mailnotificationsof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.020
PassedNAVerify filter-byfunctionality for "AllPhones" and phonecontacts of CiscoUnifiedCommunications SelfCare Portal aftersuccessful login
Filter-byfunctionalityfor "AllPhones" andphone contactsof self careportal aftersuccessfullogin
UCJ11.5S.CUCM.G.021
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan32
Test Results SummaryCisco Unified Communications Manager
PassedNAVerify loginfunctionality of self careportal check if thebanner message isdisplayed in self carelogin page when useruploads a banner inCisco UnifiedCommunications SelfCare Portal
Loginfunctionalityof self careportal whenuser uploadsthe customlogin messagein admin page
UCJ11.5S.CUCM.G.022
PassedNAVerify the add UCservice button takes toUC service page withproduct type by defaultselected as directory
Add UCservice buttonin Unified CM
UCJ11.5S.CUCM.G.023
PassedNAVerify whether devicelocation tracking serviceoption is displayed in themain menu in CiscoUnifiedCommunicationsManager successfully
Display devicelocationtrackingservices optionin main menu
UCJ11.5PH2S.CUCM.G.001
PassedNAVerify whether devicelocation tracking serviceoption is displayed in themain menu and able toselect wireless accesspoint controller option inCisco UnifiedCommunicationsManager successfully
Selectingwirelessaccess pointcontrolleroption inadvancedfeatures
UCJ11.5PH2S.CUCM.G.002
PassedNAVerify whether theSNMP settings arechecked when thecontrollers are added inswitches and accesspoint controller page inCisco CommunicationsManager and also checkfor the statussuccessfully
Testing SNMPsettings whenaddingcontroller inwirelessaccess pointcontroller
UCJ11.5PH2S.CUCM.G.018
PassedNAVerify whether pop upmessage is displayed ifwe click the sync iconafter adding thecontroller detailssuccessfully in CiscoUnifiedCommunicationsManager
Sync initiatedpopup afteradding thecontroller
UCJ11.5PH2S.CUCM.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 33
Test Results SummaryCisco Unified Communications Manager
PassedNAVerify whether errornotification is displayedwhen the existingcontroller name is addedagain in Cisco UnifiedCommunicationsManager
Errornotificationwith samecontrollername inUnified CM
UCJ11.5PH2S.CUCM.G.005
PassedNAVerify whether theindividual controller isable to cancelsynchronize and checkfor the error notificationis displayed in CiscoUnifiedCommunicationsManager
Cancelsynchronizefor individualcontroller inUnified CM
UCJ11.5PH2S.CUCM.G.006
PassedNAVerify whether the popup message is displayedwhen the controller isdeleted in CiscoCommunicationsManager successfully
Popupmessage whenthe controlleris deleted
UCJ11.5PH2S.CUCM.G.007
PassedNAVerify whether the statusof AP remainsunchanged afterrestarting the service inCisco CommunicationsManager successfully
Restart theservice andverify thestatus of AP
UCJ11.5PH2S.CUCM.G.008
PassedNAVerify whether last syncsuccess string displayedin wireless access pointcontroller configurationpage after thesynchronization isinitiated successfully inCisco UnifiedCommunicationsManager
Last syncsuccess aftersynchronizationof controller inUnified CM
UCJ11.5PH2S.CUCM.G.009
PassedNAVerify whether switchesand access point pagedisplays all the addedaccess points recordssuccessfully in CiscoUnifiedCommunicationsManager successfully
Display accesspoints recordsin switchesand accesspoint page inUnified CM
UCJ11.5PH2S.CJA.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan34
Test Results SummaryCisco Unified Communications Manager
PassedNAVerify whether switchesand access point pagedisplays all the InactiveAP details successfullyin Cisco UnifiedCommunicationsManager successfully
DisplayInactive APdetails inaccess pointsrecords inswitches andaccess pointpage inUnified CM
UCJ11.5PH2S.CUCM.G.014
PassedNAVerify whether theassociated endpoints willbe displayed in accesspoint page of switchesand access point in CiscoUnifiedCommunicationsManager successfully
Findingassociatedendpoints inswitches andaccess points
UCJ11.5PH2S.CUCM.G.015
PassedNAVerify whether therebroadcast externalmulticast source optionis able to enablesuccessfully in CiscoUnifiedCommunicationsManager successfully
EnableRebroadcastexternalmulticastsource inUnified CM
UCJ11.5PH2S.CUCM.G.011
PassedNAVerify whether newMOH audio source isable to add in music onhold configuration pagemulticast source optionsuccessfully in CiscoUnifiedCommunicationsManager successfully
Adding MOHaudio sourcein music onholdconfigurationpage
UCJ11.5PH2S.CUCM.G.012
PassedNAVerify whether thedevices are sorted byusing the BSSID inswitches and accesspoint in Cisco UnifiedCommunicationsManager successfully
Able to finddevices byusing BSSID
UCJ11.5PH2S.CUCM.G.017
Cisco Unity ConnectionDefectsStatusCall Component FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 35
Test Results SummaryCisco Unity Connection
PassedIP Phone A -> Unified CM ->IP Phone B -> UnityConnection
Verify commonPIN is workingsuccessfully forCisco UnityConnection userwhen callforward all isenabled tovoicemail in78xx
Common PINfor UnityConnectionusers whenCFA tovoicemail in78xx
UCJ11.5S.CUC.G.022
PassedIP Phone A -> Unified CM ->IP Phone BIP Phone C -> Unified CM ->IP Phone B -> UnityConnection
Verify commonPIN is workingsuccessfully forCisco UnityConnection userwhen callforward busy isenabled tovoicemail in78xx
Common PINfor UnityConnectionusers whenCFB tovoicemail in78xx
UCJ11.5S.CUC.G.023
PassedIP Phone A -> Unified CM ->IP Phone B -> UnityConnection
Verify commonPIN is workingsuccessfully forCisco UnityConnection userwhen callforward noanswer isenabled tovoicemail in99xx
Common PINfor UnityConnectionusers whenCFNA tovoicemail in99xx
UCJ11.5S.CUC.G.027
PassedCJW 2 -> Unified CM ->CJW 1 -> Unity Connection
Verify commonPIN UnityConnection isworkingsuccessfully forCisco Jabber forWindows whencall forward allis enabled tovoice mail
Common PINUnityConnectionfor CJWwhencall forwardall to voicemail
UCJ11.5S.CUC.G.028
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan36
Test Results SummaryCisco Unity Connection
PassedEnd User1 -> Web Inbox ->End User2 (IP Phone A)
Verify voicemails aredeletedsuccessfullyusing thecommon PIN inCisco IP Phone8961 when enduser isconfigured withextensionmobility feature
Delete thevoice mailsusingcommon PINwhen userlogin withextensionmobilityfeature
UCJ11.5S.CUC.G.030
PassedEnd User1 -> Web Inbox ->End User2 (IP Phone A)
Verify whetherCisco IP Phone88xx user is ableto retrieve thevoice mailsusing thecommon PINwhich is sentfromWeb Inboxtool
Retrieve voicemails in 88xxusingcommon PINwhich is sentfrom WebInbox ofUnityConnection
UCJ11.5S.CUC.G.033
PassedEnd User1 -> Web Inbox ->End User2 (CJM)
Verify whetherCisco Jabber forMac user is ableto retrieve thesecure voicemailssuccessfullyusing commonPIN which issent from WebInbox tool
Send securevoice mailsfrom WebInbox tool andretrieve thesame usingcommon PINin CJM
UCJ11.5S.CUC.G.038
PassedEnd User1 -> Web Inbox ->End User2 (IP Phone A)
Verify whetherthe end user PINis updated inCiscoUnified IPPhone 9971after changingthe commonPIN throughWeb Inbox ofCisco UnityConnection
Change theend user'scommon PINin Web Inboxof UnityConnection
UCJ11.5S.CUC.G.035
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 37
Test Results SummaryCisco Unity Connection
PassedIP Phone A -> Unified CM ->IP Phone B -> UnityConnection
Verify whetherthe commonPIN is workingsuccessfullywhile retrievingvoicemails forshared lines
Common PINfor voicemailwhen IPPhones are inshared line
UCJ11.5S.CUC.G.041
PassedIP Phone A -> Unified CM ->CJW -> Unity Connection
Verify whethervoice mail issendingsuccessfullyfrom CiscoUnified IPPhone 9971 toCisco Jabber forWindows andretrieved usingcommon PIN
Send voicemail from9971 to CJWand retrieveusingcommon PIN
UCJ11.5S.CUC.G.043
Cisco Unified Communications Manager IM & Presence ServiceDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedNAVerify whether theSelf-signedcertificate fortomcat-ECDSA isgenerated in CiscoUnified IM &Presence
GenerateSelf-signedcertificate fortomcat-ECDSAin CertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.001
PassedNAVerify whether theGenerateCertificate SigningRequest fortomcat-ECDSA isgenerated in CiscoUnified IM &Presence
Generate CSRfortomcat-ECDSAin CertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.002
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan38
Test Results SummaryCisco Unified Communications Manager IM & Presence Service
PassedNAVerify whether theSelf-signedcertificate for cup- xmpp - s2s -ECDSACUP-XMPP isgenerated in CiscoUnified IM &Presence
GenerateSelf-signedcertificate forCUP-XMPP inCertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.003
PassedNAVerify whether theGenerateCertificate SigningRequest forCUP-XMPP isgenerated in CiscoUnified IM &Presence
GenerateCertificateSigningRequest forCUP-XMPP inCertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.004
PassedNAVerify when theKey Length valueis 256, then theHash Algorithmvalue will be autopopulated toSHA256 from thedrop down listSelf-signedcertificate for cup- xmpp - s2s -ECDSAsuccessfully
Auto populateto SHA256from the dropdown list ofSelf-signedcertificate forcup - xmpp -s2s - ECDSA
UCJ11.5S.IM&P.G.006
PassedNAVerify whether theSelf-signedcertificate for cup- xmpp - s2s -ECDSA isgenerated in CiscoUnified IM &Presence
GenerateSelf-signedcertificate forcup - xmpp -s2s - ECDSAin CertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 39
Test Results SummaryCisco Unified Communications Manager IM & Presence Service
PassedNAVerify whether theSelf-signedcertificate forCUP-ExtensibleMessaging andPresenceProtocol-s2s isgenerated in CiscoUnified IM &Presence
GenerateSelf-signedcertificate forcup - xmpp -s2s - ECDSAin CertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.009
PassedNAVerify whether theSelf-signedcertificate for cup- xmpp - s2s -ECDSA is able todelete in CiscoUnified IM &Presence
DeleteSelf-signedcertificate forcup - xmpp -s2s - ECDSAin CertificateManagementof Cisco IM &P
UCJ11.5S.IM&P.G.010
PassedNAVerify themaximumenterprise groupsize can be able toset to 200 and popup is displayed inCisco Unified IM& Presence
Set Maximumenterprisegroup size as200 and checkfor the pop upmessage
UCJ11.5S.IM&P.G.011
PassedNAVerify whether themaximumenterprise groupsize can be able toset to 0 and thepop up isdisplayed in CiscoUnified IM &Presence
Set theMaximumenterprisegroup size as 0and check forthe pop upmessage
UCJ11.5S.IM&P.G.012
Cisco IP PhoneDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan40
Test Results SummaryCisco IP Phone
PassedNAVerify whether thelong line label isdisplay successfullyin Cisco IP Phone88xx using JPcharacters
Assign longline label to88xx using JPcharacters
UCJ11.5S.IPPhone.G.401
PassedNAVerify whether theassigned long linelabel "2055 - INDIA- TAMILNADU -CHENNAI" isdisplayed successfullyin Cisco IP Phone88xx
Assign longline label asnumber andcapitalalphabets in88xx
UCJ11.5S.IPPhone.G.412
PassedNAVerify whether theCisco IP Phone 88xxenable DND usingsoftkey andmake surethe call is notconnectingsuccessfully
Enable DND in88xx usingsoftkey andplace a call
UCJ11.5S.IPPhone.G.428
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether theCisco IP Phone 88xxdisable DND usingsoftkey andmake surethe call getsconnectedsuccessfully
Disable DNDin 88xx usingsoftkey andplace a call
UCJ11.5S.IPPhone.G.430
PassedNAVerify whether theCisco IP Phone 88xxenable DND usingsoftkey and it isshowing DND iconon header bar
Enable DND in88xx usingsoftkey to showthe DND iconon header bar
UCJ11.5S.IPPhone.G.432
PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify whether CiscoIP Phones 88xx ableto barge the callsuccessfullywhen callmade from Cisco IPPhone A to Cisco IPPhone B which is inshared-linewith CiscoIP Phone 88xx
Call Bargefrom 88xxwhen it is onshared line
UCJ11.5S.IPPhone.G.435
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 41
Test Results SummaryCisco IP Phone
PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C->Unified CM -> IPPhone D
Verify whether CiscoIP Phone 88xx makea conference call byusing barge softkeyand able tocompletely transferthe call to Cisco IPPhone D successfully
Call Transferby 88xx whenit is on activeconference callusing barge
UCJ11.5S.IPPhone.G.444
PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C->Unified CM -> IPPhone D
Verify whether CiscoIP Phone 88xx makea conference call byusing barge softkeyand able to park theactive call andretrieved by Cisco IPPhone D successfully
Call Park by88xx when it ison activeconference callusing barge
UCJ11.5S.IPPhone.G.445
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether thenew font and font sizealert name isdisplayed successfullywhen place a call inCisco IP Phone 88xx
New font andfont sizealerting namein 88xx whenplace a call
UCJ11.5S.IPPhone.G.457
PassedNAVerify whether thechanged new font andfont size of small isdisplayed successfullyin Cisco IP Phone88xx
Change newfont and fontsize as small in88xx
UCJ11.5S.IPPhone.G.462
PassedNAVerify whether theenlarge Cisco sans(light) font issuccessfully in CiscoIP Phone 88xx
Enlarge Ciscosans (light) fontin 88xx
UCJ11.5S.IPPhone.G.471
PassedIP Phone A ->Unified CM -> IPPhone B -> UnityConnection
Verify whether theCisco IP Phone 88xxis not answer callingIP Phone send visualvoice mail call toCisco IP Phones 88xxsuccessfully
Make a call to88xx when it isnot answer itsend visualvoice mail
UCJ11.5S.IPPhone.G.483
PassedIP Phone A ->Unified CM ->Unity Connection ->IP Phone B
Verify whether all thevisual voice mail callsare compose by nameis successfully inCisco IP Phone 88xx
Visual voicemail calls arecompose byname in 88xx
UCJ11.5S.IPPhone.G.484
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan42
Test Results SummaryCisco IP Phone
PassedIP Phone A ->Unified CM ->Unity Connection
Verify whether thevisual voice mail callplayback speed fasterworks successfully inCisco IP Phone 88xx
Visual voicemail callplayback speedis faster in 88xx
UCJ11.5S.IPPhone.G.487
PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify whetherConference calldetails is displayedsuccessfully in CiscoIP Phone 8821
Conference calldetails in 8821
UCJ11.5PH2S.IPPhone.G.013
PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify whethertransfer details isdisplayed successfullyin Cisco IP Phone8821
Call Transferdetails in 8821
UCJ11.5PH2S.IPPhone.G.014
PassedNAVerify whether theJapanese characterslong line label isdisplayed successfullyin Cisco IP Phone8821
AssignJapanesecharacters forlong line labelin 8821
UCJ11.5PH2S.IPPhone.G.016
PassedNAVerify whether theDo Not Disturb statusis displayedsuccessfully in CiscoIP Phone 8821
DND status isON in 8821
UCJ11.5PH2S.IPPhone.G.017
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether theMOH is worked inCisco IP Phone 8821successfully afterpressing transfer key
Listen MOHafter pressingTransfer key in8821
UCJ11.5PH2S.IPPhone.G.019
PassedNAVerify whetherCorporate Directorydisplayed Japanesecharacter in Cisco IPPhone 8821successfully
CorporateDirectorydisplayedJapanesecharacter inCisco IP Phone8821
UCJ11.5PH2S.IPPhone.G.020
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether theMOH is workedsuccessfully in CiscoIP Phone 8821 whenit is in Shared Line
MOH in 8821when it is inShared Line
UCJ11.5PH2S.IPPhone.G.022
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 43
Test Results SummaryCisco IP Phone
PassedIP Phone B ->Unified CM -> IPPhone A
Verify whether DoNot Disturb is workedsuccessfully in CiscoIP Phone 8821 whenRinger Off optionwith Flash only
DND in 8821when RingerOff option withFlash only
UCJ11.5PH2S.IPPhone.G.023
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether Holdand Resume isworked successfullyin Cisco IP Phone8821 when it hasspecial character DNand Shared Line
Hold andResume in8821 when ithas specialcharacter DNand SharedLine
UCJ11.5PH2S.IPPhone.G.026
PassedIP Phone A ->Unified CM -> IPPhone BIP Phone A ->Unified CM -> IPPhone C
IP Phone A ->Unified CM -> IPPhone D
Verify whether Holdand Resume isworked successfullyin Cisco IP Phone8821 when New Callis initiated afterholding two activecall
Hold andResume in8821 when it isin two NewCall
UCJ11.5PH2S.IPPhone.G.028
PassedIP Phone A ->Unified CM -> IPPhone BIP Phone A ->Unified CM -> IPPhone C
Verify whether Holdand Resume isworked in Cisco IPPhone 8821 for longduration when NewCall successfully
Hold andResume in8821 for longduration whenNew Call
UCJ11.5PH2S.IPPhone.G.029
PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C
Verify whether Holdand Resume isworked successfullyin Cisco IP Phone8821 after Conferencethe call to Cisco IPPhone 88xx
Hold andResume in8821 incompleted callConference
UCJ11.5PH2S.IPPhone.G.030
PassedIP Phone C ->Unified CM -> IPPhone A -> UnifiedCM -> IP Phone B
Verify whether Holdin Cisco IP Phone8821 and Resume thecall in Cisco IP Phone8841 when it is inShared Linesuccessfully
Hold in 8821and Resume thecall in 8841when it is inShared Line
UCJ11.5PH2S.IPPhone.G.031
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether HoldReversion in Cisco IPPhone 8821successfully
Hold Reversionin 8821
UCJ11.5PH2S.IPPhone.G.035
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan44
Test Results SummaryCisco IP Phone
PassedIP Phone A ->Unified CM -> IPPhone B
Verify whether CiscoIP Phone 8821 is ableto forward a call toCisco IP Phone Bsuccessfully
CFA in CiscoIP Phone 8821to Cisco IPPhone
UCJ11.5PH2S.IPPhone.G.036
PassedIP Phone A ->Unified CM -> IPPhone C
Verify whether CallForward No Answeris worked in Cisco IPPhone 8821successfully
CFNA in CiscoIP Phone 8821to Cisco IPPhone D
UCJ11.5PH2S.IPPhone.G.038
PassedNAVerify whether CiscoIP Phone 8821 is ableto access the PersonalDirectory successfully
PersonalDirectoryaccessibility inCisco IP Phone8821
UCJ11.5PH2S.IPPhone.G.049
PassedNAVerify whether CiscoIP Phone 8821 is ableto access theCorporate Directorysuccessfully
CorporateDirectoryaccessibility inCisco IP Phone8821
UCJ11.5PH2S.IPPhone.G.050
CSCuz14699FailedNAVerify whether"Feature isunavailable" is notdisplayed in Cisco IPPhone 8945(SCCP)when unregisteredstatus
Feature isunavailablemessage is notdisplayed
UCJ11.5PH2S.IPPhone.G.374
CSCuz82110FailedNAVerify whether PhoneURL Page displayNetwork locale for IPPhone successfully
Network localein 8821
UCJ11.5PH2S.IPPhone.G.053
CSCuz85661FailedIP Phone B ->Unified CM -> IPPhone A
Verify whether alertname and display Idis displayedsuccessfully in CiscoIP Phone 8821
Alert name andDisplay ID in8821
UCJ11.5PH2S.IPPhone.G.052
Cisco Jabber for iPhone and iPadDefectsStatusCall Component FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 45
Test Results SummaryCisco Jabber for iPhone and iPad
PassedNADisable a parameter asFalse injabber-config.xml file,press continue in thewarning message as"Rooted devicedetected" in CJI
Disableparameter forJailbreak injabber-config.xmlfile and accepta warningmessage in CJI
UCJ11.5S.CJI.G.010
PassedNAEnable a Parameter forJailbreak quit thesigned Jabber andlogin again in CJIverify its shows samewarning message
Enable aParameter forJailbreak quitthe signedJabber andlogin again inCJI
UCJ11.5S.CJI.G.011
PassedNAVerify whether thealerting tone triggervia speaker while themessage delivered inthe Cisco Jabber foriPhone
Alerting tonevia speakerwhile messagedelivered in CJI
UCJ11.5S.CJI.G.028
PassedNAVerify whether CiscoJabber for iPhone isable to start meetingwhile in the group chatsuccessfully
Initialize ameeting whileon a group chatfrom CJI
UCJ11.5S.CJI.G.021
PassedNAVerify whether thereceived messages ofCisco Jabber foriPhone are shown inother Jabber Clients(CJW,CJM)successfully
Receive chatmessages inMultiple JabberClients
UCJ11.5PH2S.CJI.G.202
PassedNAVerify whether thedate of sent messagesare shown in multipledevices while sendingchat messages fromCisco Jabber foriPhone
Sent messagedate in CJI
UCJ11.5PH2S.CJI.G.203
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan46
Test Results SummaryCisco Jabber for iPhone and iPad
PassedNAVerify whether thereceived message datein Cisco Jabber foriPhone 2 is matchedwith multiple Jabberclients (CJW,CJM)while sending chatmessages from CiscoJabber for iPhone 1
Receivedmessage date inMultiple JabberClients
UCJ11.5PH2S.CJI.G.204
PassedNAVerify whether thenotifications are notdisplayed in multipleJabber clients (CJW,CJM,CJI2) after CiscoJabber for iPhone 2receives chatmessagesfrom Cisco Jabber foriPhone 1
Message statusin multipleJabber Clientsafter retrievingthe chatmessages in CJI
UCJ11.5PH2S.CJI.G.206
PassedNAVerify whether thechat message isreceived in CiscoJabber for Windows,Cisco Jabber for Mac,and Cisco Jabber foriPhone 2 successfullyand sent replymessagefrom Cisco Jabber forWindows whileretrieving chatmessage from CiscoJabber for iPhone 1
Retrieve chatmessages inmultipledevices(CJI,CJW,CJM)and reply fromCJW
UCJ11.5PH2S.CJI.G.207
PassedNAVerify whether thelogin status of CiscoJabber is shown inApple watch when itis paired with CiscoJabber for iPhone
Jabber loginstatus in Applewatch
UCJ11.5PH2S.CJI.G.217
PassedNAVerify whether thechat messagenotifications aredisplayed successfullyin Apple watch whilesending chat messagefrom Cisco Jabber forWindows
Chat messagenotifications inApple watch
UCJ11.5PH2S.CJI.G.218
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 47
Test Results SummaryCisco Jabber for iPhone and iPad
PassedCJW -> Unified CM ->CJI
Verify whether themissed callnotifications aredisplayed successfullyin Apple watch whilecalling from CiscoJabber forWindows toCisco Jabber foriPhone
Missed callnotifications inApple watch
UCJ11.5PH2S.CJI.G.219
PassedNAVerify whether theavailability status isdisplayed correctly inApple watch afterpairing the AppleWatch with iPhone
End useravailabilitystatus in Applewatch
UCJ11.5PH2S.CJI.G.220
PassedCJW -> Unified CM ->CJI
Verify whether the callreceive and decline isworked fine in Applewatch while makingcall from Cisco Jabberfor windows to CiscoJabber for iPhone
Receive andDecline the callin Apple watch
UCJ11.5PH2S.CJI.G.221
PassedNAVerify whether theCisco Jabber isinstalled and signed iniPhone with IOSversion 9.0successfully
Install andlogin Jabber iniPhone withversion 9.0
UCJ11.5PH2S.CJI.G.223
PassedNAVerify whether thealert when available isworked fine in CiscoJabber for Desktop(CJW,CJM) whenCisco Jabber foriPhone user becomesavailable
Alert whenavailable inCisco Jabberdesktop deviceswhen loginwith CJI user
UCJ11.5PH2S.CJI.G.209
PassedNAVerify whether theInstant Messaging isworked fine in CiscoJabber for Desktop(CJW,CJM) afterchanging presencestatus to gray scale inCisco Jabber foriPhone
Gray scalestatus in Jabberdesktop deviceswhen loginwith CJI user
UCJ11.5PH2S.CJI.G.210
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan48
Test Results SummaryCisco Jabber for iPhone and iPad
PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for iPhonewhile adding groupsfor contacts
Use Japanesecharacters (ひらがな,カタカナ,会意)while addinggroup ofcontacts in CJI
UCJ11.5PH2S.CJI.G.103
PassedNAVerify whether thespecial characters(!@#$%^&*) aredisplayed correctly inCisco Jabber foriPhone while addingcustom status andcontacts group
Use specialcharacters(!@#$%^&*)in custom statusand contactsgroup in CJI
UCJ11.5PH2S.CJI.G.105
PassedNAVerify Cisco Jabberfor iPhone 6s can ableto view chatnotification on 3Dtouch successfully
Chatnotifications on3D touch in CJI
UCJ11.5PH2S.CJI.G.486
PassedNAVerify whether theCisco Jabber for Applewatch paired withCisco Jabber foriPhone getting anincoming messagenotification from CJAin glances screensuccessfully
MessageNotification inglances screenof Apple watch
UCJ11.5PH2S.CJI.G.408
PassedCJW -> Unified CM ->CJI
Verify whether theCisco Jabber for Applewatch display theHoldstatus successfully
Hold status inApple watch
UCJ11.5PH2S.CJI.G.412
PassedNAVerify whether CiscoJabber for iPhone 6scan sign in CiscoJabber via 3D touchsuccessfully
Sign in CJI userby 3D touch
UCJ11.5PH2S.CJI.G.419
PassedCJI -> Unified CM ->CJA
Sign in Cisco Jabberfor iPhone 6s via 3Dtouch and verify CiscoJabber for iPhone 6scan initiate a call toother Jabber clientssuccessfully
Sign in Jabbervia 3D touch inCJI and make acall to otherJabber Clients
UCJ11.5PH2S.CJI.G.420
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 49
Test Results SummaryCisco Jabber for iPhone and iPad
PassedNAVerify Cisco Jabberfor iPhone 6s can senda chat to CJIPad via3D touch successfully
Start chatsession withCJIPad in CJIusing 3D touch
UCJ11.5PH2S.CJI.G.421
PassedNAVerify Cisco Jabberfor iPhone 6s candisplay the recents via3D touch successfully
Display ofrecents in CJIvia 3D touch
UCJ11.5PH2S.CJI.G.422
PassedNAVerify Cisco Jabberfor iPhone 6s can set apreview chat bycustomizing amessageusing 3D touchsuccessfully
Set a previewchat bycustomize amessage using3D touch in CJI
UCJ11.5PH2S.CJI.G.425
PassedNAVerify Cisco Jabberfor iPhone 6s can senda default previewmessage 'Thank you!'by using 3D touchsuccessfully
Send a defaultpreview chat'Thank you!' byusing 3D touchin CJI
UCJ11.5PH2S.CJI.G.428
PassedNAVerify whether CiscoJabber for iPad is ableto send broadcastmessage to alreadycreated group from itscontact listsuccessfully
SendingBroadcastmessage fromCJIPad togroup from itscontact
UCJ11.5S.CJIPad.G.001
PassedCJIPad1 -> UnifiedCM -> CJIPad2
Verify whether CiscoJabber for iPad is ableto send broadcastmessage during a call
Send broadcastmessage fromCJIPad1 toCJW during acall withCJIPad2
UCJ11.5S.CJIPad.G.003
PassedNAVerify whether CiscoJabber for iPad is ableto access in the rooteddevice
Login Jabber inthe CJIPadwhere therooted featureenable
UCJ11.5S.CJIPad.G.006
PassedNAEnable a parameter asTrue injabber-config.xml file,press a quit button inthe warning messageverify the CJIPad quitsuccessfully
Enableparameter forJailbreak injabber-config.xmlfile and Ignorea warningmessage inCJIPad
UCJ11.5S.CJIPad.G.007
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan50
Test Results SummaryCisco Jabber for iPhone and iPad
PassedNADisable a parameter asFalse injabber-config.xml file,check the warningmessage as "Rooteddevice detected" inCJIPad
Disableparameter forJailbreak injabber-config.xmlfile
UCJ11.5S.CJIPad.G.008
PassedNAVerify whether CiscoJabber for iPad is ableto send a meetinginvite to Cisco Jabberfor Windows
Send a meetingInvite to CJWfrom CJIPad
UCJ11.5S.CJIPad.G.026
PassedNAVerify the CiscoJabber for iPad add anew participant in thecreated chat sessionwith Cisco Jabber forWindows in thecontact menusuccessfully
Adding aparticipant increated chatsession
UCJ11.5PH2S.CJIPad.G.479
PassedNAVerify the CiscoJabber for iPad initiatea chat session fromcontact menu withCisco Jabber forWindows successfully
Initiate a chatsession bytapping a userpresent in thecontact ofCJIPad
UCJ11.5PH2S.CJIPad.G.442
PassedCJI1 -> Unified CM ->CJIPad Pro -> UnifiedCM -> CJI2
Verify whether theCisco Jabber for iPadPro can transfer call toCisco Jabber foriPhone successfully
Call Transferfrom CJIPadPro to CJI
UCJ11.5PH2S.CJIPad.G.449
PassedNAVerify whether theCisco Jabber iPad Procan initiated groupchat with Cisco Jabberfor Android and CiscoJabber for iPhonesuccessfully
Initiate GroupChat fromCJIPad Pro
UCJ11.5PH2S.CJIPad.G.455
PassedMX100 ->UnifiedCM-> CJIPad
Verify whether CiscoJabber for iPad Progetting an incomingcall from video endpoint successfully
Initiate a callfrom video endpoints toCJIPad Pro
UCJ11.5PH2S.CJIPad.G.470
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 51
Test Results SummaryCisco Jabber for iPhone and iPad
PassedNAVerify the CiscoJabber can sign insuccessfully in iPadwhen iOS 9 installed
Login Jabber iniPad with iOS 9installed
UCJ11.5PH2S.CJIPad.G.471
PassedNAVerify the Phoneservice working inCisco Jabber for iPadduring iOS 9 isinstalled
Phone Servicestatus in CJIPadwhen iOS 9 isinstalled
UCJ11.5PH2S.CJIPad.G.472
PassedCJM -> Unified CM ->CJIPad
Verify the CiscoJabber for iPad canreceive incoming callfrom Cisco Jabber forMac during iOS 9installed
Make a callfrom CJM toCJIPad wheniOS 9 isinstalled
UCJ11.5PH2S.CJIPad.G.474
PassedNAVerify whether theJapanese characters(Hiragana, Katakana,Kanji) are displayedcorrectly in CiscoJabber for iPad whilecreating user ID withfirst name and lastname
Use Japanesecharacters(Hiragana,Katakana,Kanji) in firstand last namewhile creatinguser ID forCJIPad
UCJ11.5PH2S.CJIPad.G.104
Cisco Jabber for AndroidDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedNAVerify whetherCisco Jabber forAndroid is able tosend broadcastmessage toalready createdgroup from itscontact listsuccessfully
SendBroadcastmessage fromCJA to groupfrom itscontact
UCJ11.5S.CJA.G.001
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan52
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherCisco Jabber forAndroid is able tosend broadcastmessage to CiscoJabber forWindows andCisco Jabber forMac from itscontact listsuccessfully
Sendbroadcastmessage fromCJA toselected userfrom thecontact list
UCJ11.5S.CJA.G.005
PassedNAVerify whetherCisco Jabber forAndroid is able toaccess in theRooted device
Login CJA inrooted device
UCJ11.5S.CJA.G.016
PassedNAEnable aparameter as Trueinjabber-config.xmlfile, press a quitbutton in thewarning messageverify the CiscoJabber forAndroid quitsuccessfully
Enableparameter forJailbreak injabber-config.xmlfile and Ignorea warningmessage inCJA.
UCJ11.5S.CJA.G.017
PassedNADisable aparameter asFalse injabber-config.xmlfile, press quit inthe warningmessage as"Rooted devicedetected" in CiscoJabber forAndroid
Disableparameter forJailbreak injabber-config.xmlfile and Ignorea warningmessage inCJA
UCJ11.5S.CJA.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 53
Test Results SummaryCisco Jabber for Android
PassedNADisable aparameter asFalse injabber-config.xmlfile, presscontinue in thewarning messageas "Rooted devicedetected" in CiscoJabber forAndroid
Disableparameter forJailbreak injabber-config.xmlfile and accepta warningmessage inCJA
UCJ11.5S.CJA.G.020
PassedCJW -> Unified CM ->CJA
Verify whetherCisco Jabber forAndroid is able toattend a call andcommunicate viaspeaker
Attend aincoming callin CJA viaSpeaker
UCJ11.5S.CJA.G.006
PassedNAVerify whetherCisco Jabber forAndroid is able toenable a Nativeringtone
Enabling theNativeringtone inCJA
UCJ11.5S.CJA.G.031
PassedNAVerify whetherCisco Jabber forAndroid is able toset a Ciscoringtone and get acall alert
Enabling theCisco ringtonein CJA
UCJ11.5S.CJA.G.032
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1 isable to reply amessage to CiscoJabber forAndroid2successfully
Reply fromandroid wear
UCJ11.5PH2S.CJA.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan54
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays theemoticonsreceived fromCisco Jabber forAndroid2 duringP2P chatsuccessfully
Displayemoticons inandroid wear
UCJ11.5PH2S.CJA.G.006
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the errormessage whenCisco Jabber forAndroid1 logoutof Jabber
Logout in CJAand displayserror messagein androidwear
UCJ11.5PH2S.CJA.G.008
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays thenumber of unreadmessagesreceived fromCisco Jabber forAndroid2 duringP2P chat
Displayunreadmessages inandroid wear
UCJ11.5PH2S.CJA.G.009
PassedCJA2 ->Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays themissed callnotificationreceived fromCisco Jabber forAndroid2
Displaymissed callnotification inandroid wearfrom CJA
UCJ11.5PH2S.CJA.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 55
Test Results SummaryCisco Jabber for Android
PassedCJW -> Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays themissed callnotificationreceived fromCisco Jabber forWindows duringP2P chat withCisco Jabber forAndroid2
Displaymissed callnotification inandroid wearduring P2Pchat
UCJ11.5PH2S.CJA.G.012
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the deleteconversation iconsuccessfully
Deleteconversationin androidwear
UCJ11.5PH2S.CJA.G.015
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays therecents iconsuccessfully
Displayrecents icon inandroid wear
UCJ11.5PH2S.CJA.G.016
PassedCJA2 ->Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the callon hold statuswhen CiscoJabber forAndroid2 holdsthe call of CiscoJabber forAndroid1
Display callon hold statusin androidwear
UCJ11.5PH2S.CJA.G.018
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan56
Test Results SummaryCisco Jabber for Android
PassedCJA2 ->Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the callresumed statuswhen CiscoJabber forAndroid2 resumesthe call of CiscoJabber forAndroid1
Display callresumed statusin androidwear
UCJ11.5PH2S.CJA.G.019
PassedCJA2 ->Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the errornotification whenthe call is failed inCisco Jabber forAndroid1 due tochange in network
Display errormessage inandroid wearwhen callfailed
UCJ11.5PH2S.CJA.G.022
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the groupchat invite fromCisco Jabber forMac successfully
Group chatinvitenotificationdisplay inandroid wear
UCJ11.5PH2S.CJA.G.026
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the filesent notificationwhen it sendsJPEG file toCisco Jabber forAndroid2 duringP2P chatsuccessfully
File sentnotification inandroid wearduring P2Pchat
UCJ11.5PH2S.CJA.G.030
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 57
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1 isable to reply forgroup chatmessagesuccessfully
Reply forgroup chatmessage inandroid watch
UCJ11.5PH2S.CJA.G.034
PassedCJA1 ->Unified CM ->CJA2
Verify whetherCisco Jabber forAndroid1 is ableto make a callwith Cisco Jabberfor Android2 byclicking itscontact from itscontact listsuccessfully
Make a callfrom thecontact list
UCJ11.5PH2S.CJA.G.035
PassedNAVerify whetherCisco Jabber forAndroid1 displaysthe targetnumbers of CiscoJabber forAndroid2 byclicking itscontact from thecontact listsuccessfully
Display targetnumbers list inthe contact list
UCJ11.5PH2S.CJA.G.036
PassedNAVerify whethermore emoticonscan be sent fromCisco Jabber forAndroid1 to CiscoJabber forAndroid2successfully
Send moreemoticonsfrom CJA1 toCJA2
UCJ11.5PH2S.CJA.G.502
PassedNAVerify whetherfile (Image-JPEG)can be transferredduring group chatfromCisco Jabberfor Android tomultiple Jabberclientssuccessfully
File transferduring groupchat fromCJAto multipledevices
UCJ11.5PH2S.CJA.G.510
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan58
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherJapaneseDate/Time formatis showingproperly inmultiple Jabberclients during thegroup chatsuccessfully
JapaneseDate/TimeFormat duringgroup chat inmultipledevices
UCJ11.5PH2S.CJA.G.518
PassedNAVerify whethergroup chatnotification isshown andaccepted inmultiple Jabberclients whenCisco Jabber forAndroid1 initiatedthe Group chatsuccessfully
Group chatacceptnotification inMultipledevices
UCJ11.5PH2S.CJA.G.519
PassedNAVerify whetherCisco Jabber forAndroid1 is ableto record personalmeeting roomsuccessfully.
RecordPersonalmeeting roomfrom CJA
UCJ11.5PH2S.CJA.G.535
PassedNAVerify whetherCisco Jabber forAndroid1 is ableto lock personalmeeting roomsuccessfully.
Lock Personalmeeting roomfrom CJA
UCJ11.5PH2S.CJA.G.536
PassedNAVerify whetherCisco Jabber forAndroid1 is ableto leave personalmeeting roomsuccessfully.
LeavePersonalmeeting roomfrom CJA
UCJ11.5PH2S.CJA.G.537
PassedNAVerify whetherCisco Jabber forAndroid is able tosend crash logsthrough mailsuccessfully
Send problemreporting ascrash
UCJ11.5PH2S.CJA.G.543
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 59
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherCisco Jabber forAndroid is able tocall and videologs through mailsuccessfully
Send problemreporting ascall and video
UCJ11.5PH2S.CJA.G.548
PassedNAVerify whetherthe Japanesecharacters (ひらがな,カタカナ,会意) aredisplayedcorrectly in CiscoJabber forAndroid whilecreating user IDwith first nameand last name
Use Japanesecharacters (ひらがな,カタカナ,会意) infirst and lastname whilecreating userID for CJA
UCJ11.5PH2S.CJA.G.104
PassedNAVerify whetherthe Japanese dateformat isdisplayedcorrectly in CiscoJabber forAndroid whileviewing the chathistory details
Display ofdate format(YYYY/MM/DD)in CJA whileviewing thechat historydetails
UCJ11.5PH2S.CJA.G.106
PassedNAVerify whetherthe files andscreen capturesare sentsuccessfully fromCisco Jabber forAndroid to otherJabber clients
File transferand screencaptures fromCJA
UCJ11.5PH2S.CJA.G.111
PassedCJA1 ->Unified CM ->CJA2
Verify whether"On a call" statusis showing inCisco Jabber forAndroid during anactive callbetween CiscoJabber forAndroid1 andCisco Jabber forAndroid2successfully
"On a call"presence statusduring anactive call
UCJ11.5PH2S.CJA.G.203
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan60
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherfile (Image-JPEG)can be transferredduring group chatfromCisco Jabberfor Android toCisco Jabber forWindowssuccessfully
File transfer(Image-JPEG)during groupchat fromCJAto CJW
UCJ11.5PH2S.CJA.G.206
PassedNAVerify whetherfile (Video) canbe transferredduring group chatfromCisco Jabberfor Android toCisco Jabber forWindowssuccessfully
File transfer(Video) duringgroup chatfrom CJA toCJW
UCJ11.5PH2S.CJA.G.208
PassedNAVerify whetherScreenshot can betransferred duringgroup chat fromCisco Jabber forAndroid to CiscoJabber forWindowssuccessfully
TransferScreenshotfrom CJA toCJW
UCJ11.5PH2S.CJA.G.212
PassedNAVerify whetherbasic call can bemade from CiscoJabber forWindows to CiscoJabber forAndroid is notsuccessful whenCisco Jabber forAndroid presencestatus is in DoNot Disturb
Make a callfrom CJW toCJA whenCJA is inDND state
UCJ11.5PH2S.CJA.G.270
PassedNAVerify whetherError notificationis showing inCisco Jabber forAndroid when theopened file istransferringduringGroup chatsuccessfully
ErrorNotificationwhile FileTransferduring Groupchat
UCJ11.5PH2S.CJA.G.306
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 61
Test Results SummaryCisco Jabber for Android
PassedNAVerify whetherCisco Jabber forAndroid transferthe file(Image-JPEG)during group chathas been declinedin Cisco Jabberfor Windowssuccessfully
Decline thefile transferduring groupchat
UCJ11.5PH2S.CJA.G.308
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1 isable to reply amessage asemoticons withtext to CiscoJabber forAndroid2successfully
Reply amessage asemoticon withtext in androidwear
UCJ11.5PH2S.CJA.G.237
PassedNAVerify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays moreemoticonsreceived fromCisco Jabber forAndroid2 duringP2P chatsuccessfully
Display moreemoticons inandroid wear
UCJ11.5PH2S.CJA.G.239
PassedCJA2 ->Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays themissed callDirectoryNumberreceived fromCisco Jabber forAndroid2
Displaysmissed callDN in androidwear
UCJ11.5PH2S.CJA.G.247
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan62
Test Results SummaryCisco Jabber for Android
PassedCJA2 ->Unified CM ->CJA1
Verify whetherandroid wearwhich is pairedwith Cisco Jabberfor Android1displays the callpark status whenCisco Jabber forAndroid1 parksthe call of CiscoJabber forAndroid2
Display callpark status inandroid wear
UCJ11.5PH2S.CJA.G.251
PassedNAVerify whetherblocked file (png)should not betransferred duringgroup chat fromCisco Jabber forAndroid to CiscoJabber forWindowssuccessfully
Block Filetransfer (png)during groupchat fromCJAto CJW
UCJ11.5PH2S.CJA.G.265
PassedNAVerify whethercustomizedpresence status(text withsymbols) of CiscoJabber forWindows will bereflecting in theCisco Jabber forAndroidsuccessfully
Customize thepresence statusin CJA
UCJ11.5PH2S.CJA.G.257
PassedCJA1 ->Unified CM ->CJA2 ->Unified CM ->CJW
Verify whetherCisco Jabber forAndroid transferscall to CiscoJabber forWindowssuccessfully
Call transferfrom CJA toCJW
UCJ11.5PH2S.CJA.G.233
PassedCJA1 ->Unified CM ->CJA2 ->Unified CM ->CJW
Verify whetherCisco Jabber forAndroid1 isretrive Park callwith Park numbersuccessfully
Retrive Parkcall in CJA
UCJ11.5PH2S.CJA.G.279
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 63
Test Results SummaryCisco Jabber for Android
PassedCJA1 ->Unified CM ->CJA2
Verify whetherCisco Jabber forAndroid is able topark the callsuccessfully
Call Park inCJA
UCJ11.5PH2S.CJA.G.309
PassedCJA1 ->Unified CM ->CJA2
Verify whetherthe call hold andresume issuccessful inCisco Jabber forAndroid
Hold andresume thecall in CJA
UCJ11.5PH2S.CJA.G.310
PassedNAVerify whetherthe Cisco Jabberfor Androidphone service isin connected stateafter login toJabber viaCollaborationEdge successfully
Phone servicein connectedstate via CE
UCJ11.5PH2S.CJA.SR.001
PassedNAVerify whetherCisco Jabber forAndroid phoneservice connectedstatus whenJabber comesback from the idlestate viaCollaborationEdge
Phone serviceconnectedstatus whenJabber comesfrom idle statevia CE
UCJ11.5PH2S.CJA.SR.003
PassedCJA1 -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA2
Verify whetherCisco Jabber forAndroid1 is ableto make a call toCisco Jabber forAndroid2 viaCollaborationEdge when phoneservice inconnected state inboth clients
Make a callfrom CJAwhen phoneservice inconnectedstate via CE
UCJ11.5PH2S.CJA.SR.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan64
Test Results SummaryCisco Jabber for Android
PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA
Verify whetherCisco Jabber forAndroid receivesan incoming callfromCisco Jabberfor Windowswhen it is in idlestate viaCollaborationEdge
Receiving anincoming callfrom CJWwhen CJA inidle state viaCE
UCJ11.5PH2S.CJA.SR.005
PassedCJW -> VCS-E ->VCS-C -> Unified CM-> VCS-C -> VCS-E ->CJA
Verify whetherCisco Jabber forAndroid receivesthe incoming callfromCisco Jabberfor windows viaCollaborationEdge after 10minutes durationfrom login time ofCisco Jabber forAndroid
Incoming callin CJA fromCJW after 10minutesduration fromlogin time ofCJA via CE
UCJ11.5PH2S.CJA.SR.006
CSCuz83408FailedNAVerify whetherduring group chatnotification isgetting fromCisco Jabber forWindows whenCisco Jabber forAndroid is"DND" stagesuccessfully ornot
During groupchatnotification isgetting fromCJW whenCJA "DND"stage
UCJ11.5PH2S.CJA.G.092
CSCuz85024FailedNAVerify whethercustomizing incustom user textis takingUnlimited words(text words)successfully ornot
Customizingin custom usertext is takingUnlimitedwords (textwords)
UCJ11.5PH2S.CJA.G.093
Cisco Jabber for WindowsDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 65
Test Results SummaryCisco Jabber for Windows
PassedNAVerify whether CiscoJabber for Windows isable to send broadcastmessage to CiscoJabber for Android andCisco Jabber for Macfrom the contacts listsuccessfully
Sendingbroadcastmessage fromCJW to bothdesktop andmobile clients
UCJ11.5S.CJW.G.001
PassedNAVerify whether CiscoJabber for Windows isable to send broadcastmessage to groupcreated already in thecontacts successfully
Sendingbroadcastmessage fromCJW to thegroup from itscontacts
UCJ11.5S.CJW.G.002
PassedCJW1 -> Unified CM-> CJW2
Verify whether CiscoJabber for Windows1is able to sendbroadcast message toCisco Jabber forAndroid and CiscoJabber for Mac fromits contact list duringcall with Cisco Jabberfor Windows2successfully
Sendingbroadcastmessage fromCJW1 to CJMand CJA duringcall with CJW2
UCJ11.5S.CJW.G.003
PassedCJW1 -> Unified CM-> CJW2
Verify whether CiscoJabber for Windows1is able to sendbroadcast message tothe group createdalready in the contactsduring call with CiscoJabber for Windows2successfully
Sendingbroadcastmessage fromCJW1 to thegroup from itscontacts during acall with CJW2
UCJ11.5S.CJW.G.004
PassedCJW2 -> Unified CM-> CJW1
Verify whether CiscoJabber for Windows1is able to set thecustom ringtones fromthe "select ringtone"option from thesettings menu andcheck the customringtone is ringedwhen it gets theincoming call fromCisco Jabber forWindows2successfully
Customringtones forcalls in CJW
UCJ11.5S.CJW.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan66
Test Results SummaryCisco Jabber for Windows
PassedCJW1 -> Unified CM-> CJW2
Verify whether CiscoJabber for Windows1is able to enable the"mute Jabber soundswhen on a call" optionduring a call withCisco Jabber forWindows2successfully
Mute Jabbersound optionduring a call
UCJ11.5S.CJW.G.018
PassedNAVerify whether CiscoJabber for Windows1is able to set thecustom chat alert fromthe "chat messagesound" option undersettings menu andcheck the custom chatsound is heard when itgets the chat alert fromCisco Jabber forWindows2successfully
Custom soundfor chat messagein CJW
UCJ11.5S.CJW.G.021
PassedCJW2 -> Unified CM-> CJW1
Verify whether CiscoJabber for Windows1do not display theincoming call alertfrom Cisco Jabber forWindows2 when "donot show incoming callalerts when in Do notDisturb" option isenabled in CiscoJabber for Windows1successfully
Do not showincoming callalert in DNDmode
UCJ11.5S.CJW.G.022
PassedNAVerify whether CiscoJabber for Windows1is able to enable thechat room messagealert option and alsochecks the alert fromCisco Jabber forWindows2 is displayedin Cisco Jabber forWindows1successfully
Chat roommessage alert inCJW
UCJ11.5S.CJW.G.014
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 67
Test Results SummaryCisco Jabber for Windows
PassedNAVerify whether CiscoJabber for Windows isable to enable the chatroom message alertoption and also checkthe sound is heardwhen the chat roommessage is receivedfrom Cisco Jabber forMac and also the alertis displayed in CiscoJabber for Windowssuccessfully
Displaynotification withsound alert forchat roommessages
UCJ11.5S.CJW.G.016
PassedNAVerify whether sharescreen works in CiscoJabber for Windowssuccessfully
Share screen inCJW
UCJ11.5PH2S.CJW.G.005
PassedNAVerify whether CiscoJabber for Windows isable to sendscreenshots duringgroup chat successfully
SendScreenshotsduring groupchat in CJW
UCJ11.5PH2S.CJW.G.008
PassedNAVerify whethermeeting invitescheduled via outlookshows in Cisco Jabberfor Windowssuccessfully
Schedulemeetinginvitations viaoutlook
UCJ11.5PH2S.CJW.G.010
PassedNAVerify whether userpresence status is ableto reflect in MicrosoftOutlook successfullywhen the user statuschanged in CiscoJabber for Windows
Changedpresence statusin CJW shouldreflect inMicrosoftOutlook
UCJ11.5PH2S.CJW.G.011
PassedCJW A -> UnifiedCM -> CJW B
Verify whether CiscoJabber for Windows isable to initiate a callduringWebExmeetingsuccessfully
Initiate callbetween CJWduring WebExmeeting
UCJ11.5PH2S.CJW.G.017
PassedNAVerify whethermessage invite is sentvia SMS to CiscoJabber for WindowsduringWebExmeetingsuccessfully
Send invitemessage to CJWvia SMS duringWebEx Meeting
UCJ11.5PH2S.CJW.G.018
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan68
Test Results SummaryCisco Jabber for Windows
PassedNAVerify whethernotification message isable to get in CiscoJabber for Windows Aduring WebEx whenCisco Jabber forWindows B leaves themeeting
Notificationmessage shownin CJW A whenCJW B leavesWebEx meeting
UCJ11.5PH2S.CJW.G.023
PassedNAVerify whether huntgroup notification isshown once log out ofHunt Group in CiscoJabber for Windowssuccessfully
Hunt Grouplogoutnotification inCJW
UCJ11.5PH2S.CJW.G.052
PassedCJA -> Unified CM-> CJW
Verify whetherincoming call toast isdisplayed in CiscoJabber for Windowswhen Cisco Jabber forAndroid dails HuntPilot Numbersuccessfully
Incoming calltoast displayedin CJW whenCJA dail HuntPilot Number
UCJ11.5PH2S.CJW.G.053
PassedCJW A -> UnifiedCM1 -> CJW B ->Unified CM1 -> CJWC
Verify whether CiscoJabber for Windows isable to hold andresumewhen callmadeto hunt pilot numberusing Longest IdleDistributionAlgorithmsuccessfully
Hold andResume betweenCJW A, CJW B,CJW C in sameHunt-Group
UCJ11.5PH2S.CJW.G.071
PassedIP Phone A ->Unified CM -> CJW
Verify whether CiscoJabber for Windows inHunt Group withBroadcast algorithm isable to attend the callfrom any Cisco IPPhone using Hunt PilotNumber successfully
Add CJW inHunt GroupwithBroadcastalgorithm andmake a call toCJW from anyCisco IP Phoneusing Hunt PilotNumber
UCJ11.5PH2S.CJW.G.055
PassedIP Phone A ->Unified CM -> IPPhone B CJM ->Unified CM -> CJW
Verify whether the callis forwarded to CiscoJabber for Windowswhen devices in a HuntGroup are busysuccessfully
Call forward toCJW whendevices are inbusy state
UCJ11.5PH2S.CJW.G.063
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 69
Test Results SummaryCisco Jabber for Windows
PassedCJW A -> UnifiedCM -> CJW B ->Unified CM -> CJWC
Verify whether call isable to forward toCisco Jabber forWindows during groupchat successfully
Call forward toCJW duringgroup chat
UCJ11.5PH2S.CJW.G.080
PassedCJM -> Unified CM-> CJW -> UnifiedCM -> IP Phone C
Verify whether CiscoJabber for Windowsattends the incomingcall from Cisco Jabberfor Mac dials huntpilot number and ableto transfer the call toany Cisco IP Phonesuccessfully
Transfer call toany Cisco IPPhone whenCJW attends theincoming callfrom CJM &dials Hunt PilotNumber
UCJ11.5PH2S.CJW.G.061
PassedCJM -> Unified CM-> CJW
Verify whether the callis forwarded to CiscoJabber for Windowswhen no devices in theHunt group attends theincoming call fromCisco Jabber for Macusing hunt pilotnumber successfully
The call isforwarded toCJW when nodevices in theHunt Grouppicks the callfrom CJM
UCJ11.5PH2S.CJW.G.062
PassedIP Phone A ->Unified CM2 -> SIPTrunk -> UnifiedCM1 -> CJW
Verify whether CiscoIP Phone A fromUnified CM2 makes acall to hunt pilotnumber via SIP Trunkto Cisco Jabber forWindows present inthe hunt groupsuccessfully
Make a call fromCisco IP Phone78xx to HuntPilot number viaSIP Trunk
UCJ11.5PH2S.CJW.G.067
PassedCJW A -> UnifiedCM1 -> CJW B ->Unified CM1 -> ICTtrunk-> Unified CM2-> IP Phone A
Verify whether CiscoJabber for Windows Bpresent in hunt groupattends the call andinitiates conferencewith Cisco IP Phone78xx via ICT Trunksuccessfully
MakeConference callwith CJW andCisco IP Phone78xx via ICTtrunk
UCJ11.5PH2S.CJW.G.069
PassedIP phoneA ->UnifiedCM -> CJW B
Verify whether CiscoJabber for Windowsfrom Line Group 2attends the call fromany Cisco IP Phonewhen two Line groupsare mapped to singleHunt list
Two Line groupsmapped intosingle Hunt listand make a callfrom any CiscoIP Phone viaHunt PilotNumber
UCJ11.5PH2S.CJW.G.072
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan70
Test Results SummaryCisco Jabber for Windows
PassedNAVerify whether CiscoJabber for Windows isable to removeparticipants during agroup chat successfully
Remove aparticipantduring a groupchat in CJW
UCJ11.5PH2S.CJW.G.086
PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windows 1while chatting withCisco Jabber forWindows 2
Use Japanesecharacters (ひらがな,カタカナ,会意) whilechatting in CJW
UCJ11.5PH2S.CJW.G.101
PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile adding customcontacts
Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding customcontacts in CJW
UCJ11.5PH2S.CJW.G.102
PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile adding customtabs
Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding customtabs in CJW
UCJ11.5PH2S.CJW.G.104
PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile adding group forcontacts
Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding group ofcontacts in CJW
UCJ11.5PH2S.CJW.G.105
PassedNAVerify whether theJapanese characters(ひらがな,カタカナ,会意) are displayedcorrectly in CiscoJabber for Windowswhile creating andediting chat rooms
Use Japanesecharacters (ひらがな,カタカナ,会意) whileadding chatrooms in CJW
UCJ11.5PH2S.CJW.G.106
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 71
Test Results SummaryCisco Jabber for Windows
PassedNAVerify whether thename format(lastname- firstname)is displaying correctlyfor Japanese userswhile creating user IDwith Japanesecharcters (ひらがな,カタカナ,会意)successfully
Display ofJapanesecharacters (ひらがな,カタカナ,会意) in first andlast name whilecreating user IDfor CJW
UCJ11.5PH2S.CJW.G.108
PassedNAVerify whether theJapanese date format isdisplayed correctly inCisco Jabber forWindows whileviewing the calendar inmeetings tab
Display of dateformat(YYYY/MM/DD)in CJW whileviewing thecalendar
UCJ11.5PH2S.CJW.G.110
Cisco Jabber for MacDefectsStatusCallComponent FlowDescriptionTitleLogical ID
PassedNAVerify whether CiscoJabber for Mac is able tosend broadcast messageto Cisco Jabber forAndroid andCisco Jabberfor Windows from itscontact list successfully
Sendingbroadcastmessage fromthe contact list
UCJ11.5S.CJM.G.001
PassedNAVerify whether CiscoJabber for Mac displays"call with edit" option inhub menu successfully
Call with Editin CJM
UCJ11.5S.CJM.G.006
PassedCJM ->Unified CM ->CJW
Verify whether CiscoJabber for Mac is able toedit the directory numberof Cisco Jabber forWindows from the recenthub menu and make acall successfully
CJM Edits thedirectorynumber ofCJW fromRecents tabusing "callwith edit"option
UCJ11.5S.CJM.G.007
PassedNAVerify whether a user canable to add custom tab inthe Hub menu in CiscoJabber for Macsuccessfully
User can addcustom tab inthe menu
UCJ11.5S.CJM.G.012
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan72
Test Results SummaryCisco Jabber for Mac
PassedNAVerify whether CiscoJabber for Mac1 user canable to create custom tabin the Hub menu duringP2P chat with CiscoJabber for Mac2successfully
Creatingcustom tab inthe Hub menuduring P2Pchat
UCJ11.5S.CJM.G.015
PassedCJM ->Unified CM ->CJW
Verify whether CiscoJabber for Mac is able toadd the new locationduring call with CiscoJabber for Windows byenabling the new locationdetection check boxsuccessfully
New Locationupdate in CJMduring call
UCJ11.5S.CJM.G.020
PassedNAVerify whether CiscoJabber for Mac is able todecline the new locationdetected popup when it isconnected with LANsuccessfully
Decline newlocation updatewhen CJMconnectedwithLAN
UCJ11.5S.CJM.G.023
PassedNAVerify whether CiscoJabber for Mac1 displaysthe "alert when available"message successfullywhen Cisco Jabber forAndroid comes online
Displays "alertwhenavailable"message whenmobile client isavailable
UCJ11.5S.CJM.G.025
PassedCJM1 -> Unified CM-> CJM2
Verify whether CiscoJabber for Mac1 displaysthe "alert when available"message successfullywhen Cisco Jabber forWindows comes online ,during a call with CiscoJabber for Mac2
Displays "alertwhenavailable"messageduring a call
UCJ11.5S.CJM.G.026
PassedNAVerify whether CiscoJabber for Mac1 displaysthe alert messagesuccessfully when CiscoJabber for Mac2, CiscoJabber for Android comesonline at same time
Displays alertmessage whentwo or moreusers becomeavailable atsame time
UCJ11.5S.CJM.G.029
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 73
Test Results SummaryCisco Jabber for Mac
PassedCJM2 -> Unified CM-> CJM1
Verify whether CiscoJabber for Mac1 ofgroup1 attends the callfrom Cisco Jabber forMac2 of group2 of samecluster
Attendinggroup call fromanother group
UCJ11.5S.CJM.G.057
PassedNAVerify whether CiscoJabber for Mac is able toremove my chat roomssuccessfully
Removingpersistent chatrooms fromMy rooms
UCJ11.5S.CJM.G.042
PassedNAVerify whether CiscoJabber for Mac1 is ableto send persistent chatinvite to Cisco Jabber forMac2 by exceeding theparticipant limit
Exceeding theparticipantlimit inpersistent chatroom
UCJ11.5S.CJM.G.045
PassedNAVerify whether CiscoJabber for Mac1 is ableto remove Cisco Jabberfor Windows from thechat room successfully
Removingmembers fromthe chat room
UCJ11.5S.CJM.G.049
PassedNAVerify whether CiscoJabber for Mac is able toedit the persistent chatroom name successfully
Editingpersistent chatroom name ofCJM
UCJ11.5S.CJM.G.051
PassedNAVerify chat rooms areadded successfully inCisco Jabber forWindows which iscreated using double bytecharacters in CiscoJabber for Mac
Add chatrooms withdouble bytecharacters
UCJ11.5S.CJM.G.052
PassedNAVerify Cisco Jabber forMac1 is able to do P2Pchat with Cisco Jabberfor Mac2 whoparticipates in persistentchat at same time.
P2P chat withpersistent chatroommembersin CJM
UCJ11.5S.CJM.G.053
PassedNAVerify whether CiscoJabber for Mac is able tocreate a group chat withthe same persistent chatroom memberssuccessfully
Creating agroup chatwith the sameparticipantsfrom thepersistent chat
UCJ11.5S.CJM.G.054
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan74
Test Results SummaryCisco Jabber for Mac
CSCux53851FailedNAVerify whether CiscoJabber for Mac is able toreceive text and alsoemoticons throughbroadcast message fromCisco Jabber forWindows successfully
ReceivingBroadcastmessage withtext andemoticonsfrom CiscoJabber forWindows
UCJ11.5S.CJM.G.077
CSCux53871FailedNAVerify whether CiscoJabber for Mac is able toadd the custom tab URIof CUP and check theURI is redirecting to theCUP web pagesuccessfully
Redirectingcustom tabURI from thehub menu
UCJ11.5S.CJM.G.078
PassedNAVerify whether theusername field isavailable for user inputon first logon in CiscoJabber for Macsuccessfully
Username fieldis available forthe first loginin CJM
UCJ11.5Ph2S.CJM.G.001
PassedNAVerify whether theusername field becomesread only mode with thesame user for allsubsequent logins inCisco Jabber for Macsuccessfully
Username fieldbecomes readonly for allsubsequentlogins with thesame user inCJM
UCJ11.5Ph2S.CJM.G.002
PassedNAVerify whether theusername field becomeseditable once afterresetting Cisco Jabber forMac successfully
Username fieldbecomeseditable afterresetting CJM
UCJ11.5Ph2S.CJM.G.003
PassedNAVerify whether thecustom ringtones aredisplayed in Cisco Jabberfor Mac successfully
Display ofcustomringtones inCJM
UCJ11.5Ph2S.CJM.G.006
PassedNAVerify whether all thecustom ringtones areplayed in Cisco Jabberfor Mac successfully
Click and playall customringtones inCJM
UCJ11.5Ph2S.CJM.G.007
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 75
Test Results SummaryCisco Jabber for Mac
PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM ->CJM
Verify whether theClassic Ringer ringtoneis played when a call istransferred to CiscoJabber for Mac from anyCisco IP Phonesuccessfully
Set ringtone asClassic Ringerand transfer acall to CJM
UCJ11.5Ph2S.CJM.G.012
PassedIP Phone -> UnifiedCM ->CJW ->UnifiedCM ->CJM
Verify whether theRipples ringtone isplayed when a call isforwarded to CiscoJabber for Mac fromCisco Jabber forWindows successfully
Set customringtone asRipples andforward a callfrom CJW
UCJ11.5Ph2S.CJM.G.013
PassedNAVerify whether huntgroup notification isshown once log out ofHunt Group in CiscoJabber for Macsuccessfully
Hunt Grouplogoutnotification inCJM
UCJ11.5Ph2S.CJM.G.018
PassedCJW ->Unified CM ->CJM
Verify whether CiscoJabber for Mac is able toattend the call whenCisco Jabber forWindows dials to HuntPilot Number
Add CJM inthe hunt groupand establishcall from CJWto CJM usinghunt pilotnumber
UCJ11.5Ph2S.CJM.G.019
PassedCJI -> Unified CM ->CJM
Verify whether CiscoJabber for Mac present inthe Line Group attendsthe call from CiscoJabber for iPhone when"Top Down" DistributionAlgorithm is configuredin the Line group
Add CJM inHunt Groupwith TopDownalgorithm andmake a call toCJM from CJIusing HuntPilot Number
UCJ11.5Ph2S.CJM.G.022
PassedCJA -> Unified CM ->CJM2
Verify whether CiscoJabber forMac fromLineGroup 2 attends the callfrom Cisco Jabber forAndroid when two Linegroups are mapped tosingle Hunt list
Create twoLine Groupsand map theminto singleHunt List
UCJ11.5Ph2S.CJM.G.025
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan76
Test Results SummaryCisco Jabber for Mac
PassedCJW ->Unified CM ->CJM ->Unified CM ->IP Phone C
Verify whether CiscoJabber for Mac attendsthe incoming call fromCisco Jabber forWindows dials Hunt PilotNumber and transfers thecall to any Cisco IPPhone successfully
CJM attendsthe incomingcall from HuntPilot Numberand transfersthe call to anyCisco IP Phone
UCJ11.5Ph2S.CJM.G.026
PassedIP Phone A -> UnifiedCM -> IP Phone BCJW ->Unified CM ->CJM
Verify whether the call isforwarded to CiscoJabber for Mac whendevices in a Hunt Groupare busy successfully
CallForwarded toCJM when thedevices in aHunt Group isbusy
UCJ11.5Ph2S.CJM.G.028
PassedNAVerify whether CiscoJabber for Mac2 is ableto invite members to chatroom created by CiscoJabber for Mac1successfully
Moderatorsinvitingmembers tochat room inCJM
UCJ11.5Ph2S.CJM.G.032
PassedNAVerify whether CiscoJabber for Mac2 is ableto join passwordprotected chatroomcreated by Cisco Jabberfor Mac1 successfully
Join thepasswordprotected chatroom in CJM
UCJ11.5Ph2S.CJM.G.033
PassedNAVerify whether CiscoJabber for Mac2 is ableto remove itself from achat room created byCisco Jabber forMac1 byclicking RemoveMembership buttonsuccessfully
CJM2 removedby itself from achat roomcreated byCJM1
UCJ11.5Ph2S.CJM.G.042
PassedNAVerify whether CiscoJabber for Mac2 andCisco Jabber forWindows are able todownload the filestransferred from CiscoJabber for Mac1 duringpersistent chatsuccessfully
File downloadby all the chatmembersduringpersistent chat
UCJ11.5Ph2S.CJM.G.047
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 77
Test Results SummaryCisco Jabber for Mac
PassedNAVerify whether CiscoJabber for Mac1 is ableto receive an errormessage automaticallyduring chat when primarychat service is downsuccessfully
Receive anerror messagewhen primarychat service isdown in CJM
UCJ11.5Ph2S.CJM.G.053
PassedNAVerify whether CiscoJabber for Mac1 is ableto view the chat serviceby clicking show moreoption with secondarychat service successfully
View the chathistory withthe secondaryservice
UCJ11.5Ph2S.CJM.G.057
PassedNAVerify whether IM isshown in the chatwindow in Cisco Jabberfor Mac1, Cisco Jabberfor Mac2, and CiscoJabber for iPhonesuccessfully
IM is shown asread in all thedevices loggedon with thesame user
UCJ11.5Ph2S.CJM.G.061
PassedNAVerify whether CiscoJabber for Mac1 is ableto send a file to CiscoJabber for Android, CiscoJabber for Windows andCisco Jabber for Mac2successfully
Transfer a filefrom CJM tomultipledevices loggedon with thesame user
UCJ11.5Ph2S.CJM.G.063
PassedNAVerify whether theJapanese characters (ひらがな,カタカナ,会意)are displaying correctlyin Cisco Jabber for Macwhile doing chat
Use Japanesecharacters (ひらがな,カタカナ,会意)while chattingin CJM
UCJ11.5Ph2S.CJM.G.101
PassedNAVerify whether theJapanese characters (ひらがな,カタカナ,会意)are displayed correctly inCisco Jabber for Macwhile creating / editingchat rooms
Use Japanesecharacters (ひらがな,カタカナ,会意)while addingchat rooms inCJM
UCJ11.5Ph2S.CJM.G.105
PassedNAVerify whether theJapanese date format(YYYY/MM/DD) isdisplayed correctly inCisco Jabber for Macwhile viewing the chathistory details
Display of dateformat(YYYY/MM/DD)in CJM whileviewing thechat historydetails
UCJ11.5Ph2S.CJM.G.109
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan78
Test Results SummaryCisco Jabber for Mac
PassedCJI -> Unified CM ->CJM
Verify whether CiscoJabber for Mac is able toattend the call whenCisco Jabber for iPaddials to Hunt PilotNumber
Add CJM inthe hunt groupand establishcall from CJIto CJM usinghunt pilotnumber
UCJ11.5Ph2S.CJM.G.433
PassedCJA -> Unified CM ->CJM
Verify whether theMischief ringtone isplayed when CiscoJabber forMac getting anincoming call fromCiscoJabber for Androidsuccessfully
Set ringtone asMischief andmake a callfrom CJA toCJM
UCJ11.5Ph2S.CJM.G.479
PassedNAVerify whether CiscoJabber for Mac is able toget a file from CiscoJabber for Windowswhen logged withmultiple device with thesame user
Transfer a filefrom CJW tomultipledevices loggedon with thesame user
UCJ11.5Ph2S.CJM.G.480
PassedNAVerify whether CiscoJabber for Android, CiscoJabber for iPhone andCisco Jabber for Mac isable to receive screencapture from CiscoJabber for Windowswhen MDM enabled
Send a screencapture fromCJW tomultipledevices loggedon with sameuser
UCJ11.5Ph2S.CJM.G.481
Cisco SparkDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedNAVerify instantmessage withpeople issuccessful fromCisco Spark forWindows usingactivated E-mailaccount
Chat withpeopleinstantlyusing theirE-mailaccount
UCJ11.5S.Spark.G.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 79
Test Results SummaryCisco Spark
PassedNAVerify user is ableto create Sparkroom with list ofpeople when theylogin first timefrom Cisco Sparkfor Windows
Create aSpark roomwhen userlogin for firsttime
UCJ11.5S.Spark.G.004
PassedNAVerify user is ableto mark 1-To-1room as favoritein Cisco Spark forWindows
Mark 1-To-1room asfavorite inCisco Sparkfor Windows
UCJ11.5S.Spark.G.009
PassedNAVerify user is ableto create 1-To-1room and sendinstant messagesto people who arein different E-maildomain
Create 1-To-1roominstantly withdifferentdomain users
UCJ11.5S.Spark.G.014
PassedNAVerify user is ableto view number ofpeople present in1-To-1 room fromCisco Spark forWindows
People countin 1-To-1room
UCJ11.5S.Spark.G.016
PassedNAVerify user is ableto send andreceive instantmessages in1-To-1 room fromCisco Spark forWindows
Send andreceive IM in1-To-1 room
UCJ11.5S.Spark.G.017
PassedNAVerify user is ableto see visual alertnotification whenreceiving instantmessages in1-To-1 room fromCisco Spark forWindows
Visual alertnotificationwhenreceiving IM
UCJ11.5S.Spark.G.019
PassedNAVerify user is ableto delete theinstant messagesin 1-To-1 room
Delete themessage in1-To-1 room
UCJ11.5S.Spark.G.028
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan80
Test Results SummaryCisco Spark
PassedNAVerify Sparkclient isdisplayingmessages withdate and time in1-To-1 room fromCisco Spark forWindows
Displaymessageswith date andtime in1-To-1 room
UCJ11.5S.Spark.G.038
PassedNAVerify user is ableto create Sparkroom title inJapanese fromCisco Spark forWindows
Room namein Japanesecharacterswhen creatingSpark Room
UCJ11.5S.Spark.G.012
PassedNAVerify user is ableto add anotheruser to currentSpark room
Add user toSpark room
UCJ11.5S.Spark.G.042
PassedNAVerify user is ableto remove peoplefrom Spark room
Removepeople fromSpark room
UCJ11.5S.Spark.G.044
PassedNAVerify user is ableto leave or exitfrom 1-To-1 roomfrom Cisco Sparkfor Windows
Leave from1-To-1 room
UCJ11.5S.Spark.G.058
PassedSpark for Windows1 ->Spark Cloud -> Spark forWindows2
Verify user is ableto make a videocall from 1-To-1room from CiscoSpark forWindows
Start videocall from1-To-1 roomusing CiscoSpark forWindows
UCJ11.5S.Spark.G.066
PassedSpark for Windows1 ->Spark Cloud -> Spark forWindows2 -> Spark forWindows3
Verify user is ableto start video callin Spark roomfrom Cisco Sparkfor Windows
Start videocall in Sparkroom fromSpark forWindows
UCJ11.5S.Spark.G.069
PassedSpark for Windows1 ->Spark Cloud -> Spark forWindows2
Verify user is ableto view calldetails of videocall in 1-To-1room from CiscoSpark forWindows
Call details ofvideo call in1-To-1 room
UCJ11.5S.Spark.G.074
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 81
Test Results SummaryCisco Spark
PassedSpark for Windows1 ->Spark Cloud -> Spark forWindows2
Verify user is ableto start a videocall from 1-To-1room and sharescreen usingSpark forWindows
Start a Videocall from1-To-1 roomand sharescreen usingSpark forWindows
UCJ11.5S.Spark.G.076
PassedNAVerify user is ableto send document(*.doc) file in1-To-1 room fromCisco Spark forWindows1 toCisco Spark forWindows2
Send doc filein 1-To-1room
UCJ11.5S.Spark.G.081
PassedNAVerify user is ableto send more than10 attachments inSpark room andview recentcontent fromCisco Spark forWindows
Send morethan 10attachmentsin Sparkroom andview recentcontent
UCJ11.5S.Spark.G.091
PassedNAVerify calendarconnectorconnection withCisco Spark cloudmanagementportal issuccessful
Calendarconnectorconnectionwith CiscoSpark cloudmanagementportal
UCJ11.5S.Spark.G.095
PassedNAVerify callconnectorconnection withCisco Spark cloudmanagementportal
Callconnectorconnectionwith CiscoSpark cloudmanagementportal
UCJ11.5S.Spark.G.097
PassedNAVerify user is ableto add UnifiedCM server in callconnector ofcloud extensionsin expressway
Add UnifiedCM server incall connector
UCJ11.5S.Spark.G.098
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan82
Test Results SummaryCisco Spark
PassedNAVerify user is ableto send differentfile formats in1-To-1 room fromCisco Spark forWindows1 toCisco Spark forWindows2
Send differentfile formats in1-To-1 room
UCJ11.5S.Spark.G.084
PassedNAVerify user is ableto notify peoplewho unchecked'Mark asImportant' inSpark room using@mentions
Use@mentions inSpark room
UCJ11.5S.Spark.G.161
PassedNAVerify user is ableto filter and viewmessagesavailable in@mentions menuin left side ofCisco Spark forWindows
View@mentionsfilter to view@mentionsmessages
UCJ11.5S.Spark.G.162
Cisco Jabber GuestDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> SX10 Quick Set-> Presentation Sharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton Windows andCisco TelePresenceSX10 Quick Set viaCisco Expressway-E
Presentationsharing invideo callbetweenJabber guestclient onWindows andSX10 QuickSet via CiscoExpressway-E
UCJ11.5S.JG.G.001
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 83
Test Results SummaryCisco Jabber Guest
PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM -> SX20Quick Set -> PresentationSharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton iOS and CiscoTelePresence SX20Quick Set via CiscoExpressway-E
Presentationsharing invideo callbetweenJabber guestclient on iOSand SX20Quick Set viaCiscoExpressway-E
UCJ11.5S.JG.G.004
PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> SX10 Quick Set-> Presentation Sharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton Android andCisco TelePresenceSX10 Quick Set viaCisco Expressway-E
Presentationsharing invideo callbetweenJabber guestclient onAndroid andSX10 QuickSet via CiscoExpressway-E
UCJ11.5S.JG.G.005
PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM ->DX70/DX80 ->Presentation Sharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton iOS and CiscoDX70/80 via CiscoExpressway-E
Presentationsharing invideo callbetweenJabber guestclient on iOSand DX seriesendpoints viaCiscoExpressway-E
UCJ11.5S.JG.G.007
PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> DX70/DX80 ->Presentation Sharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenJabber guest clienton Android andCisco DX70/80 viaCisco Expressway-E
Presentationsharing invideo callbetweenJabber guestclient onAndroid andDX seriesendpoints viaCiscoExpressway-E
UCJ11.5S.JG.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan84
Test Results SummaryCisco Jabber Guest
PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM ->MX200-G2
To Verify that user isable to do auto startvideo call betweenJabber guest clienton iOS and CiscoTelePresenceMX200-G2 viaCisco Expressway-E
Video callbetweenJabber guestclient on iOSandMX200-G2via CiscoExpressway-E
UCJ11.5S.JG.G.010
PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> MX200-G2
To Verify that user isable to do auto startvideo call betweenJabber guest clienton Android andCisco TelePresenceMX200-G2 viaCisco Expressway-E
Video callbetweenJabber guestclient onAndroid andMX200-G2via CiscoExpressway-E
UCJ11.5S.JG.G.011
PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> DX70/DX80
To Verify that user isable to do auto startvideo call betweenJabber guest clienton Windows andCisco DX 70/80endpoints via CiscoExpressway-E
Video callbetweenJabber guestclient onWindows andDX seriesendpoints viaCiscoExpressway-E
UCJ11.5S.JG.G.012
PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM ->DX70/DX80
To Verify that user isable to do auto startvideo call betweenJabber guest clienton iOS and CiscoDX DX70/DX80endpoints via CiscoExpressway-E
Video callbetweenJabber guestclient on iOSand DX seriesendpoints viaCiscoExpressway-E
UCJ11.5S.JG.G.013
PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> EX90
To Verify that OpusCodec is used invideo call betweenJabber guest clienton Windows andCisco TelePresenceSystem EX90 viaCisco Expressway-E
Video callbetweenJabber guestclient onWindows andEX90 viaCiscoExpressway-E
UCJ11.5S.JG.G.014
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 85
Test Results SummaryCisco Jabber Guest
PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM -> EX90
To Verify that OpusCodec is used invideo call betweenJabber guest clienton iOS and CiscoTelePresence SystemEX90 via CiscoExpressway-E
Video callbetweenJabber guestclient on iOSand EX90 viaCiscoExpressway-E
UCJ11.5S.JG.G.015
PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> IntegratorPackage C90
To Verify that OpusCodec is used invideo call betweenJabber guest clienton Android andCisco TelePresenceSystem IntegratorPackage C90 viaCisco Expressway-E
Video callbetweenJabber guestclient onAndroid andIntegratorPackage C90via CiscoExpressway-E
UCJ11.5S.JG.G.016
PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> 7821
To Verify that OpusCodec is used invideo call betweenJabber guest clienton Windows andCisco Unified IPPhone 7821 viaCisco Expressway-E
Audio callbetweenJabber guestclient onWindows and7821 via CiscoExpressway-E
UCJ11.5S.JG.G.017
PassedJabber guest client(Windows) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> EX90
To Verify that user isable to make a callwithout videobetween Jabber guestclient on Windowsand CiscoTelePresence SystemEX90 via CiscoExpressway-E
Call withoutvideo betweenJabber guestclient onWindows andEX90 viaCiscoExpressway-E
UCJ11.5S.JG.G.018
PassedJabber guest client (iOS)-> Cisco Expressway-E-> Cisco Expressway-C-> Unified CM -> EX90
To Verify that user isable to make a callwithout videobetween Jabber guestclient on iOS andCisco TelePresenceSystem EX90 viaCisco Expressway-E
Call withoutvideo betweenJabber guestclient on iOSand EX90 viaCiscoExpressway-E
UCJ11.5S.JG.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan86
Test Results SummaryCisco Jabber Guest
PassedJabber guest client(Android) -> CiscoExpressway-E -> CiscoExpressway-C ->UnifiedCM -> IntegratorPackage C90
To Verify that user isable to make a callwithout videobetween Jabber guestclient on Androidand CiscoTelePresence SystemIntegrator PackageC90 via CiscoExpressway-E
Call withoutvideo betweenJabber guestclient onAndroid andIntegratorPackage C90via CiscoExpressway-E
UCJ11.5S.JG.G.020
PassedJabber guestclient(IOS)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->SX80Codec->PresentationSharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on IOS andCisco TelePresenceSX80 Codec viaCisco Expressway-E
Presentationsharing invideo callbetweenJabber Guestclient on iOSand SX80Codec Set viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.001
PassedJabber guestclient(Android)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->MX200G2->Presentation Sharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Androidand CiscoTelePresenceMX200G2 via CiscoExpressway-E
Presentationsharing invideo callbetweenJabber Guestclient onAndroid andMX200 G2Set via CiscoExpressway-E
UCJ11.5PH2S.JG.G.003
PassedJabber guestclient(Android)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX80->PresentationSharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Androidand Cisco DX80 viaCisco Expressway-E
Presentationsharing invideo callbetweenJabber Guestclient onAndroid andDX80 Set viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 87
Test Results SummaryCisco Jabber Guest
PassedJabber guestclient(Windows)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->MX300G2->Presentation Sharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Windowsand CiscoTelePresenceMX300 G2endpoints via CiscoExpressway-E
Presentationsharing invideo callbetweenJabber Guestclient onWindows andMX300 G2endpoints viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.005
PassedJabber guestclient(MAC)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX80->PresentationSharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on MAC andCisco DX80endpoint via CiscoExpressway-E
Presentationsharing invideo callbetweenJabber Guestclient onMACand DX80endpoint viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.006
PassedJabber guestclient(Android)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->SX80Codec->PresentationSharing
To Verify that user isable to view ContentShare statistics whileSharing Presentationin video call betweenCisco Jabber Guestclient on Androidand CiscoTelePresence SX80Codec via CiscoExpressway-E
Presentationsharing invideo callbetweenJabber Guestclient onAndroid andSX80 Codecendpoints viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.008
PassedJabber guestclient(Windows)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->SX80 Codec
To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on Windowsand CiscoTelePresence SX80Codec via CiscoExpressway-E
Video callbetweenjabber Guestclient onwindows andSX80 Codecvia CiscoExpressway-E
UCJ11.5PH2S.JG.G.009
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan88
Test Results SummaryCisco Jabber Guest
PassedJabber guestclient(IOS)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX70
To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on IOS andCisco DX70 viaCisco Expressway-E
Video callbetweenJabber Guestclient on iOSand DX70 viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.011
PassedJabber guestclient(Windows)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX80
To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on Windowsand Cisco DX80 viaCisco Expressway-E
Video callbetweenJabber Guestclient onwindows andDX80 viaCiscoExpressway-E
UCJ11.5PH2S.JG.G.013
PassedJabber guestclient(MAC)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->IntegratorPackageC90
To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on MAC andCisco TelePresenceSystem IntegratorPackage C90 viaCisco Expressway-E
Video callbetweenJabber Guestclient on Macand IntegratorPackage C90via CiscoExpressway-E
UCJ11.5PH2S.JG.G.014
PassedJabber guestclient(IOS)->JabberGuest Server->CiscoExpressway-E->CiscoExpressway-C->UnifiedCM->DX650
To Verify that user isable to do auto startvideo call betweenCisco Jabber Guestclient on IOS andCisco DX650 viaCisco Expressway-E
Video callbetweenjabber Guestclient on iOSand DX650via CiscoExpressway-E
UCJ11.5PH2S.JG.G.015
Cisco TelePresence Video Communication ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedNAVerify whetherCisco TelePresenceVideoCommunicationServer is named as"Expressway/VCSBase"when systemis in pre-activationstate
"Expressway/VCSBase" whensystem is inpre-activationstate
UCJ11.5S.VCS.G.001
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 89
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whether'Cloud Extension'is renamed as'Hybrid Services' inCisco TelePresenceVideoCommunicationServer underApplication menu
"CloudExtension" isrenamed as'HybridServices'
UCJ11.5S.VCS.G.002
PassedNAVerify whetherCisco TelePresenceVideoCommunicationServer can bedeployedsuccessfully onVMware ESXi 6.0
Deploy CiscoVCS onVMwareESXi6.0
UCJ11.5S.VCS.G.003
PassedNAVerify whether'Filter ByKeyword' is addedfor Syslog Outputin CiscoTelePresenceVideoCommunicationServer underMaintenance ->Logging
Keyword filteris added forsyslog output
UCJ11.5S.VCS.G.004
PassedNAVerify whetherTransportConnectionconfigurations areadded for SyslogOutput in CiscoTelePresenceVideoCommunicationServer underMaintenance ->Logging
TransportConnectionconfigurationsare added forsyslog output
UCJ11.5S.VCS.G.005
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan90
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX10 Quick Set ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> MX200-G2 ->Presentation Sharing
Verify whetherpresentation can beshared from CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200-G2 bothregistered withCisco UnifiedCommunicationsManager viaCollaboration Edge
Presentationsharing fromSX10 QuickSet toMX200-G2both registeredviaCollaborationEdge
UCJ11.5S.VCS.G.006
PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> SX20 Quick Set
Verify whether thevideo call fromCisco TelePresenceMX300-G2 toCisco TelePresenceSX20 Quick Setboth registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edgecan be establishedsuccessfully
Making videocall fromMX300-G2and SX20Quick Set bothregistered viaCollaborationEdge
UCJ11.5S.VCS.G.007
PassedSX10 Quick Set ->Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX80Codec -> Hold/Transfer-> Cisco VCSExpressway -> CiscoVCS -> Unified CM ->DX80
Verify whether theconsultative calltransfer fromCiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edgeto Cisco DX80registered withCisco UnifiedCommunicationsManager workssuccessfully
Consultativecall transferfrom SX80Codec toDX80 viaCollaborationEdge
UCJ11.5S.VCS.G.009
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 91
Test Results SummaryCisco TelePresence Video Communication Server
PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> SX10 Quick SetMX300-G2 -> Add ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM -> EX90(Hold/Resume)
Verify whetherHold / Resume avideo conferenceamong CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoTelePresence SX10Quick Set andCisco TelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully
Hold/Resumea videoconferenceamongMX300-G2 ,SX10 QuickSet and EX90viaCollaborationEdge
UCJ11.5S.VCS.G.010
PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX80 ->Presentation Sharing
Verify whetherpresentation can beshared from CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager viaCollaboration Edgeto Cisco DX80registered withCisco UnifiedCommunicationsManager
Presentationsharing fromMX300-G2 toDX80 viaCollaborationEdge
UCJ11.5S.VCS.G.013
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan92
Test Results SummaryCisco TelePresence Video Communication Server
PassedMX300-G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX80MX300-G2 -> Add ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM-> EX90->Conference
Verify whether thevideo conferenceamong CiscoTelePresenceMX300-G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, Cisco DX80and CiscoTelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully
Making videoconferenceamongMX300-G2,DX80&EX90viaCollaborationEdge
UCJ11.5S.VCS.G.014
PassedMX200-G2-> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM (Publisher) -> 88617841 -> Cisco VCSExpressway -> CiscoVCS -> Unified CM(Subscriber) -> 8861
Verify whetherCisco TelePresenceMX200-G2registered in CiscoUnifiedCommunicationsManager Publishervia CollaborationEdge and CiscoUnified IP Phone8861 registeredwith Cisco UnifiedCommunicationsManager Publisherare registered toCisco UnifiedCommunicationsManagersubscriber whenthe publisher isdown and call isestablishedsuccessfully
Making callfromMX200-G2registered inUnified CMCluster viaCollaborationEdge to IPPhone 8861registered withUnified CMCluster whenUnified CMPublisher isdown
UCJ11.5S.VCS.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 93
Test Results SummaryCisco TelePresence Video Communication Server
PassedEX90 -> Cisco VCSExpressway (Primary)-> CiscoVCS ->UnifiedCM -> Cisco VCS ->Cisco VCS Expressway(Primary) -> SX10Quick SetEX90 -> Cisco VCSExpressway(Secondary)-> CiscoVCS ->UnifiedCM -> Cisco VCS->Cisco VCSExpressway (Secondary)-> SX10 Quick Set
Verify whetherVideo call is alivebetween CiscoTelePresenceSystem EX90registered viaCollaboration Edge& CiscoTelePresence SX10Quick Setregistered in CiscoUnifiedCommunicationsManager whenCisco VCSExpresswayPrimary goes downin CollaborationEdge
Checking callstatus betweenEX90registered viaCollaborationEdge andSX10 QuickSet registeredin Unified CMwhen PrimaryCisco VCSExpresswaygoes down inCollaborationEdge
UCJ11.5S.VCS.G.020
PassedDX80 -> Unified CM ->Integrator Package C90
Verify whetherauto answer workssuccessfully inCisco TelePresenceSystem IntegratorPackage C90registered withCisco UnifiedCommunicationsManager whenconfigured usingRemote Control
ConfigureAuto Answerin IntegratorPackage C90using RemoteControl
UCJ11.5S.VCS.G.024
PassedNAVerify whetherfactory reset can bedone on the Touch10" paired withCisco TelePresenceSX80 Codecsuccessfully
Factory resetof Touch10"which is pairedwith SX80Codec
UCJ11.5S.VCS.G.025
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan94
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX10 Quick Set(Presentation Sharing)-> Cisco VCS -> SX20Quick Set
Verify whether thepresentation isshared from CiscoTelePresence SX10Quick Set to CiscoTelePresence SX20Quick Set onsetting presentationresolution to1080p5 which areregistered withCisco TelePresenceVideoCommunicationServer
Presentationsharing fromSX10 QuickSet to SX20Quick Set bysettingpresentationresolution to1080p5
UCJ11.5S.VCS.G.026
PassedNAVerify whether thedisplay of CiscoTelePresence SX20Quick Set showsPhoenix OSDwhen it is in Activemode
CheckingPhoenix OSDin SX20QuickSet in activemode
UCJ11.5S.VCS.G.027
PassedNAVerify whetherstatic IP addresscan be assigned toCisco TelePresenceSX20 Quick Setusing the newPhoenix UI inActive mode
Assign StaticIP Address toSX20 QuickSet using thenew PhoenixOSD UI
UCJ11.5S.VCS.G.028
PassedNAVerify whether thewarning messages"This touch panelis not supported.Please use thelatest model,Touch 10" isdisplayed in CiscoTelePresence SX20Quick Set whenTouch 8 isconnected
Checking forwarningmessage thatsays Touch 8"is notsupported inSX20 QuickSet.
UCJ11.5S.VCS.G.029
PassedNAVerify whether thenew resolution1920 x 1200 ispresent in CiscoTelePresence SX80Codec
New inputresolutionWUXGA forSX80 Codec
UCJ11.5S.VCS.G.031
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 95
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX80 Codec,MX200-G2 &MX300-G2 -> CiscoVCS -> Conductor ->Cisco TS on VM ->Lecture Conference
Verify whether themultistreamconference isestablishedbetween CiscoTelePresence SX80Codec, CiscoTelePresenceMX200-G2 andCisco TelePresenceMX300-G2registered to CiscoTelePresenceVideoCommunicationServer during alecture conferencewhich uses CiscoTelePresenceServer on VM asconference bridgevia CiscoTelePresenceConductor
Multistreamconferencebetween SX80Codec,MX200-G2andMX300-G2during alectureconferenceusing CiscoTelePresenceServer on VMvia Conductor
UCJ11.5S.VCS.G.032
PassedNAVerify whetherAndroid phone canbe paired withCisco TelePresenceSX20 Quick Setregistered withCisco TelePresenceVideoCommunicationServer throughCisco Proximitysuccessfully.
Pairing ofAndroid phonewith SX20Quick Setregistered withCisco VCS.
UCJ11.5S.VCS.G.035
PassedNAVerify whether theMultiway optionhas been removedin CiscoTelePresence SX80Codec
Discontinuationof Multiwayoption inSX80 Codec
UCJ11.5S.VCS.G.036
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan96
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX10 Quick Set ->Unified CM ->MX200-G2
Verify whether theLED of externalmicrophoneconnected withCisco TelePresenceMX200-G2 is litwhen a call withCisco TelePresenceSX10 Quick Set ison progress.
Checking theexternalmicrophoneLEDconnectedwithMX200-G2while in a call.
UCJ11.5S.VCS.G.038
PassedNAVerify whetherrunning the SetupAssistant of CiscoTelePresence SX20Quick Set throughTRC6 requires aprotection pin
Checking theauthenticationrequirementfor SetupAssistant ofSX20 QuickSet in activemode
UCJ11.5S.VCS.G.039
PassedNAVerify whether theresult of xStatuscommand ischanged fromCE8.0 in CiscoTelePresence SX20Quick Set.
Checking thechanges inresult ofxStatuscommand inxAPI of SX20Quick Set
UCJ11.5S.VCS.G.041
PassedNAVerify whether theremote monitoringis disabled in WebUI of CiscoTelePresence SX20Quick Set and"Video snapshotsare currentlydisabled" messageis displayed in thecall control page ofthe web GUI
Checking forrestrictions ofremotemonitoring inSX20 QuickSet.
UCJ11.5S.VCS.G.042
PassedNAVerify whetherOSD of CiscoTelePresence SX10Quick Set ischanged with newUI in Active mode
Checking fornew UI inOSD of SX10Quick Set inactive mode
UCJ11.5S.VCS.G.043
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 97
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whether theultrasound pairingquality of CiscoTelePresence SX80Codec can bemeasured usingVU meter.
Checkultrasoundpairing qualityof SX80Codec usingVU meter
UCJ11.5S.VCS.G.045
PassedNAVerify whetherCisco TelePresenceSX80 Codec canbe provisionedfrom web UI toCisco UnifiedCommunicationsManager usingHTTPSsuccessfully
ProvisionSX80 Codecto Unified CMusing HTTPS
UCJ11.5S.VCS.G.046
PassedIntegrator Package C90-> Unified CM -> EX90
Verify whether thecamera of CiscoTelePresenceSystem EX90 iscontrolled by CiscoTelePresenceSystem IntegratorPackage C90 usingRemote Controlduring video call,both are registeredwith Cisco UnifiedCommunicationsManager
ControlCamera ofremoteparticipant inIntegratorPackage C90using RemoteControl
UCJ11.5S.VCS.G.047
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan98
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX10 Quick Set ->Unified CM ->Integrator Package C90-> Add -> Unified CM-> SX20 Quick Set
Verify whether thelayout can bechanged usingRemote Control inCisco TelePresenceSystem IntegratorPackage C90during Multisiteconference withCisco TelePresenceSX10 Quick Setand CiscoTelePresence SX20Quick Set workssuccessfully , allare registered withCisco UnifiedCommunicationsManager
Change layoutin IntegratorPackage C90using RemoteControl duringMultisiteconference
UCJ11.5S.VCS.G.048
PassedSX80 Codec -> CiscoVCS -> SIP Trunk ->Unified CM -> DX650
Verify whetheraudio call fromCisco TelePresenceSX80 Codecregistered withCisco TelePresenceVideoCommunicationServer to CiscoDX650 registeredwith Cisco UnifiedCommunicationsManager workssuccessfully
Audio callfrom SX80Codecregistered inCisco VCS toDX650registered inUnified CM
UCJ11.5S.VCS.G.053
PassedSX80 Codec -> UnifiedCM -> DX650 ->Hold/Resume
Verify whetherHold/Resumeaudio call fromCisco TelePresenceSX80 Codec toCisco DX650 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully
Hold/Resumeaudio call fromSX80 Codecto DX650registered inUnified CM
UCJ11.5S.VCS.G.054
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 99
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX80 Codec(Presentation Sharing)-> Unified CM ->DX70(line 2)
Verify whetherpresentation can beshared from CiscoTelePresence SX80Codec to line 2 ofCisco DX70 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully
Presentationsharing fromSX80 Codecto line 2 ofDX70registered inUnified CM
UCJ11.5S.VCS.G.055
PassedNAVerify whetherbandwidth isreduced from10000mbps to6000mbps in CiscoTelePresence SX80Codec afterupgrading to CE8.0
Bandwidthreduction inSX80 Codecfrom10000mbps to6000mbpsafterupgrading toCE 8.0
UCJ11.5S.VCS.G.061
PassedSX80 Codec -> UnifiedCM -> SX10 Quick Set
Verify whether callfrom CiscoTelePresence SX80Codec to CiscoTelePresence SX10Quick Set with callrate as 6000mbpsboth registeredwith Cisco UnifiedCommunicationsManager
Making callfrom SX80Codec toSX10 QuickSet withbandwidth6000mbps
UCJ11.5S.VCS.G.062
PassedNAVerify whetherCisco TelePresenceSX80 Codecdetects the whiteboard andautomaticallyadjusted viaSpeaker Track 60according toconfigured snap towhite boardsettings
Snap toWhiteboardimprovementin SX80Codec usingSpeaker Track60
UCJ11.5S.VCS.G.063
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan100
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX20 Quick Set ->Unified CM cluster 1 ->500-32 -> Call ForwardAll -> Unified CMcluster 1 -> SIP Trunk-> Unified CM cluster 2-> DX650
Verify whether callfor CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager cluster 1is forwarded toCisco DX650registered withCisco UnifiedCommunicationsManager cluster 2
Call ForwardAll from500-32 toDX650registered inUnified CMthrough SIPTrunk
UCJ11.5S.VCS.G.071
PassedSX20 Quick Set ->Unified CMCluster 1 ->500-32SX10 Quick Set ->Unified CMCluster 1 ->500-32 -> Call ForwardBusy -> Unified CMCluster 1 -> SIP Trunk-> Unified CM Cluster2 -> DX650
Verify whether callfor CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager Cluster 1is forwarded toCisco DX650registered withCisco UnifiedCommunicationsManager Cluster 2when CiscoTelePresenceSystem 500-32 isbusy
Call ForwardBusy for500-32 toDX650through SIPTrunk
UCJ11.5S.VCS.G.073
PassedDX70 -> Unified CM ->SX20 Quick Set
Verify whether callstatistics can beaccessed from callpage when CiscoDX70 is in videocall with CiscoTelePresence SX20Quick Set bothregistered withCisco UnifiedCommunicationsManager
Access callstatistics fromDX70 duringvideo call
UCJ11.5S.VCS.G.076
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 101
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whetheralternate UDSserver can beadded to CiscoDX70 registeredwith Cisco UnifiedCommunicationsManager
Add alternateUDS server inDX70
UCJ11.5S.VCS.G.077
PassedNAVerify whether callsearch field ofDirectory CiscoDX70 registeredwith Cisco UnifiedCommunicationsManager , pullsresult fromRecents, Favorites,Contacts and
Call searchfield pullsresult fromRecents,Favorites,Contacts andDirectory inDX70
UCJ11.5S.VCS.G.078
PassedDX70 -> Unified CM ->EX90
Verify whether thecall can be madeby two steps fromcontact details inCisco DX70registered withCisco UnifiedCommunicationsManager
Two stepscalling for thecontact detailsin DX70
UCJ11.5S.VCS.G.079
PassedNAVerify whetherpassword to accesssettings for CiscoDX70 can be setusing commonphone profile forCisco DX70
Set passwordfor settings inDX70
UCJ11.5S.VCS.G.080
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan102
Test Results SummaryCisco TelePresence Video Communication Server
PassedEX90 -> Unified CM ->DX70 (ViewingPresentation)
Verify whether thecall from CiscoTelePresenceSystem EX90 toCisco DX70 isanswered and PiPof video isescalated to fullscreen by doubletapping in CiscoDX70 whenviewingpresentation, bothregistered withCisco UnifiedCommunicationsManager
Escalate thevideo PiP tofull screen inDX70 whenviewingpresentation
UCJ11.5S.VCS.G.081
PassedSX10 Quick Set ->Unified CM -> DX70(line 2) (ViewingPresentation )
Verify whether thepresentation isviewedcontinuously inCisco DX70 whenvideo call fromCisco TelePresenceSX10 Quick Set isanswered in line 2of Cisco DX70,both are registeredwith Cisco UnifiedCommunicationsManager
Stay viewingpresentationafteransweringvideo call inline 2 of DX70
UCJ11.5S.VCS.G.082
PassedNAVerify whetherFIPS mode ispresent underProduct SpecificConfiguration ofCisco DX70registered withCisco UnifiedCommunicationsManager
Verify FIPSmode underProductSpecificConfigurationof DX70
UCJ11.5S.VCS.G.083
PassedNAVerify whether theMouse can beconnected to CiscoDX70 using USBcable and Mouseevent is receivedby Cisco DX70
ConnectMouse toDX70 usingUSB cable
UCJ11.5S.VCS.G.084
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 103
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whethersettings can beaccessed byentering passwordin Cisco DX80registered withCisco UnifiedCommunicationsManager
Accesssettings byenteringpassword inDX80
UCJ11.5S.VCS.G.085
PassedSX10 Quick Set ->Unified CM -> DX80(Viewing Presentation)
Verify whether thepresentation isviewedcontinuously inCisco DX80 whenvideo call fromCisco TelePresenceSX10 Quick Set isanswered in CiscoDX80, both areregistered withCisco UnifiedCommunicationsManager
Stay viewingpresentationafteransweringvideo call inDX80
UCJ11.5S.VCS.G.086
PassedDX80 -> Unified CM ->DX650 -> Call ForwardNo Answer -> UnifiedCM -> DX70
Verify whether callfrom Cisco DX80to Cisco DX650 isforwarded to CiscoDX70 when thereis no answer fromCisco DX650 bothregistered withCisco UnifiedCommunicationsManager workssuccessfully
Call ForwardNoAnswer forDX650 toDX70
UCJ11.5S.VCS.G.091
PassedDX80 -> Unified CM ->DX650
Verify whetherauto answer workssuccessfully inCisco DX650registered withCisco UnifiedCommunicationsManager
Auto Answerin DX650
UCJ11.5S.VCS.G.092
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan104
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX70 -> Unified CM ->DX650 -> Hold
Verify whetherhold reversion isworkingsuccessfully inCisco DX650registered withCisco UnifiedCommunicationsManager
Hold reversionin CiscoDX650
UCJ11.5S.VCS.G.095
PassedDX650 -> Unified CM-> SX80 Codec
Verify whether thecall using Speeddial in CiscoDX650 with CiscoTelePresence SX80Codec isestablishedsuccessfully bothare registered withCisco UnifiedCommunicationsManager
Call usingSpeed dial inDX650
UCJ11.5S.VCS.G.096
PassedSX80 Codec -> UnifiedCM -> DX80 andDX650 ->Hold/Resume
Verify whether callwith CiscoTelePresence SX80Codec is put onhold in CiscoDX80 and resumedfrom DX650 whenCisco DX650 andCisco DX80 are inshared line, allregistered withCisco UnifiedCommunicationsManager
Hold/Resumefrom Sharedline of DX650and DX80
UCJ11.5S.VCS.G.097
PassedNAVerify whetherLine 1 and Line 2Directory Numberinformation areavailable in Callpage of CiscoDX650 registeredwith Cisco UnifiedCommunicationsManager
Configure 2lines forDX650 andcheck the lineinformation inCall page
UCJ11.5S.VCS.G.098
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 105
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX650 (line 2) ->Unified CM -> DX80
Verify whether thecall is establishedsuccessfullybetween line 2 ofCisco DX650 andCisco DX80 bothare registered withCisco UnifiedCommunicationsManager
Making callfrom line 2 ofDX650 toDX80
UCJ11.5S.VCS.G.099
PassedDX650 -> Unified CM-> DX80
Verify whetheraudio call isestablishedbetween CiscoDX650 and CiscoDX80 when VideoCalling is disabledfor Cisco DX650in Cisco UnifiedCommunicationsManager phonepage
Disable VideoCalling forDX650
UCJ11.5S.VCS.G.100
PassedNAVerify whetherSimple mode ofDevice UI isworkingsuccessfully forCiscoDX650whendevice UI isselected as Simplemode in phonepage in CiscoUnifiedCommunicationsManager
Device UI'Simple Mode'for DX650
UCJ11.5S.VCS.G.101
PassedNAVerify whether anexternal monitor ismirrored withCiscoDX650whenit is connectedusing HDMI outport of CiscoDX650
Mirror mode'using HDMIout port forDX650
UCJ11.5S.VCS.G.102
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan106
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX80 -> Unified CM ->DX650DX80 ( transfer ) ->Unified CM ->DX70 ->Cancel Transfer
DX80 -> Unified CM ->DX650 -> Resume
Verify whether calltransfer fromCiscoDX80 to CiscoDX70 is cancelledand Cisco DX80resumes the callwith CiscoDX650,all are registeredwith Cisco UnifiedCommunicationsManager
Cancel transferfrom DX80and resumecall withDX650
UCJ11.5S.VCS.G.103
PassedDX70 -> Unified CM ->EX90
Verify whether theSIP URIs in emailis clickable andinitiate call directlyfrom Cisco DX70registered withCisco UnifiedCommunicationsManager
Clickable SIPURIs tosimplifycallingavailableaddresses inDX70
UCJ11.5S.VCS.G.105
PassedNAVerify whether theuser can usecalculatorapplication inCisco DX80 whenoutgoing call fromCisco DX80 toCisco DX650 isringing bothregistered withCisco UnifiedCommunicationsManager
Use thecalculatorapplication inDX80 Whilean OutgoingCall is Ringing
UCJ11.5S.VCS.G.106
PassedNAVerify whetheraudio frompresentation sourcecan be listened viaspeakers in CiscoDX80
Listen to localPresentationaudio via theDX speakers
UCJ11.5S.VCS.G.107
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 107
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whetherpresentation audiois muted in CiscoDX80 whenansweringincoming call fromCisco TelePresenceSX20 Quick Setboth are registeredwith Cisco UnifiedCommunicationsManager
Presentationaudio is mutedwhenansweringincoming calls
UCJ11.5S.VCS.G.108
PassedDX80 -> Unified CM ->DX70
Verify whethervideo call can bemade from CiscoTelePresenceDX80 withCollaborationEndpoint 8.2software to CiscoDX70 with 10.2.5software bothregistered withCisco UnifiedCommunicationsManager
Make a videocall fromDX80 withCE8.2 load toDX70 with10.2.5 phoneload
UCJ11.5PH2S.VCS.G.001
PassedDX80 -> Unified CM ->SIP Trunk -> CiscoVCS-> DX70 DX80 ->Transfer -> Unified CM-> SIP Trunk -> CiscoVCS -> MX200 G2
Verify whethervideo call fromCisco DX80 with10.2.5 phone loadto CiscoTelePresenceDX70 withCollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer can betransferred to CiscoTelePresenceMX200 G2registered withCisco TelePresenceVideoCommunicationServer
Blind transferfrom DX80with 10.2.5phone load toMX200 G2registered withCisco VCS
UCJ11.5PH2S.VCS.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan108
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX70 -> Cisco VCS ->DX80
Verify whethervideo call can bemade from CiscoTelePresenceDX70 to CiscoTelePresenceDX80,both withCollaborationEndpoint 8.2software, registeredwith CiscoTelePresenceVideoCommunicationServer
Make a videocall fromDX70 toDX80, bothwith CE8.2phone loadregistered withCisco VCS
UCJ11.5PH2S.VCS.G.006
PassedDX80 -> Unified CM ->DX70 -> Audio Call
Verify whetheraudio call fromCisco TelePresenceDX80 withCollaborationEndpoint 8.2software to CiscoDX70 with 10.2.5software can bemade successfullywhen both areregistered withCisco UnifiedCommunicationsManager
Audio callfrom DX80with CE 8.2phone load toDX70 with10.2.5 phoneload
UCJ11.5PH2S.VCS.G.007
PassedDX70 -> Unified CM ->DX80(1)->Call ForwardAll ->Unified CM ->DX80(2)
Verify whethervideo call fromCisco DX70 toCisco TelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardAll to CiscoTelePresenceDX80(2) with10.2.5 software, allregistered withCisco UnifiedCommunicationsManager workssuccessfully
Call ForwardAll fromDX80(1) withCE 8.2 phoneload toDX80(2) with10.2.5,allregistered withUnified CM
UCJ11.5PH2S.VCS.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 109
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX70 -> Cisco VCS ->SIP Trunk -> UnifiedCM -> DX80(1)-> CallForward Busy ->Unified CM ->DX80(2)
Verify whethervideo call fromCisco TelePresenceDX70 withCollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardBusy to CiscoDX80(2) with10.2.5 software,both registeredwith Cisco UnifiedCommunicationsManager
Call ForwardBusy fromDX80(1) withCE 8.2 phoneload toDX80(2) with10.2.5 phoneload
UCJ11.5PH2S.VCS.G.011
PassedDX80(1) -> Unified CM-> DX80(2) DX80(1) ->Park DX70-> Retrieve-> Unified CM ->DX80(2)
Verify whethervideo call fromCisco TelePresenceDX80(1) withCollaborationEndpoint 8.2software can beparked from CiscoDX80(2) with10.2.5 software andretrievedsuccessfully fromCisco TelePresenceDX70 withCollaborationEndpoint 8.2software, allregistered withCisco UnifiedCommunicationsManager
Call park fromDX80 with10.2.5 phoneload andretrieve fromDX70with CE8.2 phone load
UCJ11.5PH2S.VCS.G.012
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan110
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX80 -> Cisco VCS ->MX200 G2 -> AudioCall
Verify whetheraudio call fromCisco TelePresenceDX80 withCollaborationEndpoint 8.2software to CiscoTelePresenceMX200 G2 can bemade successfullywhen both areregistered withCisco TelePresenceVideoCommunicationServer
Audio callfrom DX80with CE 8.2phone load toMX200 G2,both registeredwith CiscoVCS
UCJ11.5PH2S.VCS.G.016
PassedDX70 -> Unified CM ->DX80(1) -> CallForwardUnregistered ->Unified CM ->DX80(2)
Verify whethervideo call fromCisco DX70 toCisco TelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardUnregistered toCisco DX80(2)with 10.2.5software workssuccessfully, whenall are registeredwith Cisco UnifiedCommunicationsManager
Call ForwardUnregisteredfrom DX80(1)with CE 8.2phone load toDX80(2) with10.2.5 phoneload, allregistered withUnified CM
UCJ11.5PH2S.VCS.G.018
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 111
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX70 -> Cisco VCS ->SIP Trunk -> UnifiedCM -> DX80(1)-> CallForward No Answer ->Unified CM ->DX80(2)
Verify whethervideo call fromCisco TelePresenceDX70 withcollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceDX80(1) withCollaborationEndpoint 8.2software which isset to Call ForwardNo Answer toCisco DX80(2)with 10.2.5software workssuccessfully, whenboth registeredwith Cisco UnifiedCommunicationsManager
Call ForwardNo Answerfrom DX80(1)with CE 8.2phone load toDX80(2) with10.2.5 phoneload
UCJ11.5PH2S.VCS.G.019
PassedDX80 -> Unified CM ->MX200 G2 DX70 ->Unified CM -> DX80
Verify whether asecond call fromCisco DX70 with10.2.5 software canbe attended fromCisco TelePresenceDX80 withCollaborationEndpoint 8.2software which isalready in a callwith CiscoTelePresenceMX200 G2, allregistered withCisco UnifiedCommunicationsManager
Attend secondcall in DX80with CE 8.2phone load
UCJ11.5PH2S.VCS.G.020
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan112
Test Results SummaryCisco TelePresence Video Communication Server
PassedDX650(EM user) ->Unified CM -> EX60 ->Call Forward All ->Unified CM -> EX90
Verify whethervideo call fromCiscoDX650whenlogged in asExtensionMobilityuser to CiscoTelePresenceSystem EX60which is set to CallForward All toCisco TelePresenceSystem EX90 allare registered withCisco UnifiedCommunicationsManager
Make callfrom DX650by logging asEM user toEX60which isset to CallForward All toEX90
UCJ11.5PH2S.VCS.G.021
PassedDX650 -> UnifiedCM-> EX90 DX650 ->Add -> Unified CM ->EX60
Verify whether theAd-hoc conferencecall from CiscoDX650 to CiscoTelePresenceSystem EX90 andCisco TelePresenceSystem EX60 , allregistered in CiscoUnifiedCommunicationsManager
Ad-hocconference callfrom DX650registered withUnified CM
UCJ11.5PH2S.VCS.G.022
PassedNAVerify whether theuser can view thenew symphony UIin CiscoTelePresence SX10Quick Set OnScreen Displaywhich is registeredwith Cisco UnifiedCommunicationsManager afterupgrading toCollaborationEndpoint Software8.1
Check theSymphony UIof SX10QuickSet OSD afterupgrading toCE 8.1
UCJ11.5PH2S.VCS.G.023
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 113
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX10 Quick Set ->Cisco VCS -> MX200G2
Verify whether theuser can't view theFull Screen audioavatar when wemake an audio callfrom CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200 G2 bothare registered withCisco TelePresenceVideoCommunicationServer
Ensure FullScreen audioavatar is notviewed whenwe make anaudio call fromSX10 QuickSet to MX200G2 both areregistered withCisco VCS
UCJ11.5PH2S.VCS.G.027
PassedNAVerify whether theuser can see themouse pointer inCisco TelePresenceSX10 Quick Setregistered withCisco TelePresenceVideoCommunicationServer when thepresentation isshared via CiscoProximity
Check mousepointer is seenin SX10QuickSet registeredwith CiscoVCS whenpresentation isshared viaProximity
UCJ11.5PH2S.VCS.G.031
PassedSX10 QuickSet(PresentationSharing) -> Unified CM-> MX200 G2
Verify whether thepresentation isautomaticallyshared from CiscoTelePresence SX10Quick Set to CiscoTelePresenceMX200 G2 bothare registered withCisco UnifiedCommunicationsManager
PresentationAuto sharingfrom SX10Quick Set toMX200 G2both registeredwith UnifiedCM
UCJ11.5PH2S.VCS.G.032
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan114
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whether theuser can view thelocal presentationpreview in CiscoTelePresence SX10Quick Set which isregistered withCisco UnifiedCommunicationsManager afterenabling auto share
LocalPresentationPreview inSX10 QuickSet which isregistered withUnified CMafter enablingauto share
UCJ11.5PH2S.VCS.G.035
PassedSX10 Quick Set(Hold)-> Cisco VCS -> SipTrunk -> Unified CM ->Jabber for iPhone
Verify whether theuser can hold thecall between CiscoTelePresence SX10Quick Set isregistered withCisco TelePresenceVideoCommunicationServer and CiscoJabber for iPhoneis registered withCisco UnifiedCommunicationsManager
Hold the callbetween SX10Quick Setregistered withCisco VCSand Jabber foriPhoneregistered withUnified CM
UCJ11.5PH2S.VCS.G.040
PassedSX10 Quick Set(Mute)->Unified CM -> Jabberfor iPhone
Verify whether theuser can mute thecall from CiscoTelePresence SX10Quick Set to CiscoJabber for iPhoneboth are registeredwith Cisco UnifiedCommunicationsManager
Mute the callfrom SX10Quick Set toJabber foriPhone bothare registeredwith UnifiedCM
UCJ11.5PH2S.VCS.G.042
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 115
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX10 Quick Set ->Unified CM -> Jabberfor iPhone -> Add ->Unified CM -> SX20Quick Set
Verify whether theuser can add CiscoTelePresence SX20Quick Set as newparticipant to theexisting call fromCisco TelePresenceSX10 Quick Setwhich is in a callwith Cisco Jabberfor iPhone all areregistered withCisco UnifiedCommunicationsManager
Addingparticipant tothe call fromSX10 QuickSet which isregistered withUnified CM
UCJ11.5PH2S.VCS.G.043
PassedNAVerify whether anew digital clockappears in theTouch10" of CiscoTelePresence SX20Quick Set
A new digitalclock appearsin Touch10" ofSX20 QuickSet
UCJ11.5PH2S.VCS.G.047
PassedNAVerify whether thebackground imagein both Touch10"and On ScreenDisplay in CiscoTelePresence SX20Quick Set changesto default mountainview image afterchanging thebackground imageto Auto viawebpage GUI
Backgroundimage haschanged inboth Touch10"and OSD inSX20 QuickSet.
UCJ11.5PH2S.VCS.G.048
PassedNAVerify whether aMusic player iconis created and it isdisplayed next tothe self-viewbutton in CiscoTelePresence SX20Quick Set
Create acontrolinterface formusic playerand export tocodec in SX20Quick Set,usingIn-RoomControl, .
UCJ11.5PH2S.VCS.G.049
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan116
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whether theutility icon ischanged for themusic playerinterface in CiscoTelepresence SX20Quick Set.
Changing theutility icon for" musicplayer"interface inSX20 QuickSet In-RoomControl
UCJ11.5PH2S.VCS.G.051
PassedNAVerify whethersmall icon blinks inthe lower rightcorner and lastactive speaker withvideo is displayedduring an audiocall in CiscoTelePresence SX20Quick Set
A smaller iconblinks in thelower rightcornerindicating theactive audioparticipantduring anaudio call
UCJ11.5PH2S.VCS.G.053
PassedNAVerify whether theuser can changeActive Controlmode to Auto inCisco TelepresenceSX20 Quick Set
Changing theActiveControlMode to Autoin SX20QuickSet
UCJ11.5PH2S.VCS.G.054
PassedNAVerify whether adot appears,representing themouse pointer inthe far end CiscoTelePresence SX20Quick Set, when apresentation isshared via Ciscoproximity.
Displays a dotrepresentingthe mousepointer in thefar end whilepresentationsharing
UCJ11.5PH2S.VCS.G.055
PassedMX200 G2(DirectPresentation Sharing)->Unified CM ->SX20Quick Set
Verify whether,when sharing apresentation withdirect sharingenabled,presentation isshared withoutpressing sharebutton in CiscoTelePresence SX20Quick Set
DirectPresentationsharing toSX20 QuickSet
UCJ11.5PH2S.VCS.G.056
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 117
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX20 Quick Set(Presentation Sharing)->Cisco VCS -> SIPTrunk -> Unified CM ->500-32
Verify whetherpresentation can beshared in aninter-cluster videocall from CiscoTelePresence SX20Quick Setregistered withCisco TelePresenceVideoCommunicationServer to CiscoTelePresenceSystem 500-32registered withCisco UnifiedCommunicationsManager workssuccessfully
Presentationsharing in anInter-clustervideo callbetween SX20Quick Set and500-32
UCJ11.5PH2S.VCS.G.057
PassedSX20 Quick Set (EMuser)->Unified CM ->MX 300 G2 SX20Quick Set ->Add->Unified CM->500-32
Verify whetherMulti-Siteconference callfrom CiscoTelePresence SX20Quick Set bylogging asExtensionMobilityuser to CiscoTelePresenceMX300 G2 andCisco TelePresenceSystem 500-32, allregistered withCisco UnifiedCommunicationsManager workssuccessfully.
Make aMultisiteconference callfrom SX20Quick Set bylogging as EMuser toMX300G2 and 500-32
UCJ11.5PH2S.VCS.G.062
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan118
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX20 Quick Set (EMuser)(PresentationSharing)->Unified CM- >SIP Trunk ->CiscoVCS -> MX300 G2SX20 Quick Set ->Add->Unified CM ->SipTrunk ->CiscoVCS->EX90
Verify whetherPresentationSharing in anMulti-Siteconference callfrom CiscoTelePresence SX20Quick Set bylogging asExtensionMobilityuser registeredwithCisco UnifiedCommunicationsManager to CiscoTelePresenceMX300 G2 andCisco TelePresenceSystem EX90registered withCisco TelePresenceVideoCommunicationServer, workssuccessfully.
Presentationsharing in aMulti-Siteconference callfrom SX20Quick Set bylogging as EMuser toMX300G2 and EX90
UCJ11.5PH2S.VCS.G.063
PassedMX300G2(PresentationSharing)(EMuser)->Unified CM->500-32->Hold/Transfer ->Unified CM ->SX20Quick Set
Verify whether thepresentationsharing afterConsultativetransfer to CiscoTelePresence SX20Quick Set bylogging ExtensionMobility user fromCisco TelePresenceMX300 G2 , bothregistered withCisco UnifiedCommunicationsManager workssuccessfully.
Presentationsharing afterConsultativetransfer aVideo call toSX20 QuickSet by loggingas EM user
UCJ11.5PH2S.VCS.G.065
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 119
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX20 Quick Set(PresentationSharing),EX60&500-32-> Unified CM-> Sip Trunk-> MCU5310
Verify whether thepresentationsharing after longtime Meet MeConference usingMCU 5310 fromCisco TelePresenceSX20Quick Set bylogging ExtensionMobility user toCisco TelePresenceSystem 500-32 andCisco TelepresenceSystem EX60, allregistered withCisco UnifiedCommunicationsManager workssuccessfully.
Presentationsharing afterlong timeMeetme conferencein SX20QuickSet via Meetme conferenceusing MCU5310 byloggingExtensionMobility.
UCJ11.5PH2S.VCS.G.066
PassedNAVerify whether theNew Backgroundimage in CiscoTelePresence SX80Codec on Touch10" pair changes todefault mountainview image afterchanging thebackground imageto auto viawebpage GUI
Check theNewBackgroundImage in SX80Codec onTouch 10" UIfor upgradedCE 8.1.1
UCJ11.5PH2S.VCS.G.070
PassedNAVerify whether aMusic player icondisplays next to theself-view button inCisco TelePresenceSX80 Codec
UsingIn-RoomControl,Create acontrolinterface forMusic playerand export tocodec in SX80Codec
UCJ11.5PH2S.VCS.G.072
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan120
Test Results SummaryCisco TelePresence Video Communication Server
PassedIntegrator Package C90-> Unified CM ->SX80Codec
Verify whetherDirect contentsharing betweenCisco TelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSX80 Codec bothregistered in CiscoUnifiedCommunicationsManager workssuccessfully
Direct contentsharing tofar-end toSX80 CodecfromIntegratorPackage C90
UCJ11.5PH2S.VCS.G.074
PassedEX90 -> Unified CM ->SX10 Quick Set ->Transfer -> Unified CM-> SX80 Codec
Verify whether theBlind Transferfrom CiscoTelePresence SX10Quick Set andCisco TelePresenceSX80 Codec bothregistered withCisco UnifiedCommunicationsManager andDirect ContentSharing to far-endin SX80 Codec
Blind Transferfrom SX10Quick Setregistered withUnified CM toSX80 Codecand Directcontentsharing tofar-end inSX80 Codec
UCJ11.5PH2S.VCS.G.079
PassedSX80 Codec (PresenterTrack )-> Cisco VCS ->SIP Trunk ->UnifiedCM -> MX300 G2
Verify whether thePresenter Trackfeatureenabled,whilemaking a call fromCisco TelePresenceSX80 Codecregistered in CiscoTelePresenceVideoCommunicationServer and CiscoTelepresenceMX300 G2registered in CiscoUnifiedCommunicationsManager workssuccessfully
Make a callfrom SX80Codec toMX300 G2and check thePresenterTrack in SX80Codec
UCJ11.5PH2S.VCS.G.082
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 121
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX80 Codec -> UnifiedCM -> MX300G2->PresentationSharing
Verify whether thePresenter Trackfeature is enabledwhile presentationsharing betweenCisco TelePresenceMX200 G2 andCisco TelepresenceSX80 Codec bothregistered in CiscoUnifiedCommunicationsManager
PresentationsharingbetweenMX200 G2andSX80Codecand check thePresenterTrack in SX80Codec
UCJ11.5PH2S.VCS.G.085
PassedEX90(Hold)->CiscoVCS->SipTrunk->UnifiedCM->Jabber for iPhone
Verify whether theuser can hold thecall from CiscoTelePresenceSystem EX90which is registeredwith CiscoTelePresenceVideoCommunicationServer to CiscoJabber for iPhonewhich is registeredwith Cisco UnifiedCommunicationsManager
Hold the callin EX90registered withCisco VCS isin call withJabber foriPhone isregistered withUnified CM
UCJ11.5PH2S.VCS.G.095
PassedDX650 -> Unified CM-> 500-32 EX60( EMuser) ->Unified CM->DX650 -> Call Forwardbusy -> Unified CM ->EX90
Verify whether thecall is forwardedfromCiscoDX650when it is busy toCisco TelePresenceSystem EX90,when call is madefrom CiscoTelePresenceSystem EX60bylogging ExtensionMobility user ,allregistered in CiscoUnifiedCommunicationsManager
Make callfrom EX60 bylogging as EMuser to DX650which is set toCall Forwardbusy to EX90
UCJ11.5PH2S.VCS.G.098
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan122
Test Results SummaryCisco TelePresence Video Communication Server
PassedNAVerify whether thecustom wallpaperis updatedsuccessfully andthe same appears inCisco afterrestarting thedevice .
Upload customwall paper andrestart thephone usingweb GUI inCiscoTelePresenceSystem EX60
UCJ11.5PH2S.VCS.G.103
PassedNAVerify whether themessage given inthe Sign-in Banneris displayed inCisco TelePresenceSystem EX60Touch UI
Givingmessage inSign-inBannerfrom web GUIand checkingthe same in theEX60 TouchUI
UCJ11.5PH2S.VCS.G.104
PassedEX90 -> Unified CM ->Integrator Package C90->add call ->Unified CM->MX300 G2 ->Hold/Resume
Verify whether addcall in CiscoTelePresenceSystem IntegratorPackage C90 andHold/Resume callfrom CiscoTelePresenceMX300 G2 bothregistered withCisco UnifiedCommunicationsManager wokssuccessfully
Add call fromIntegraterPackage C90andHold/Resumea call inMX300 G2
UCJ11.5PH2S.VCS.G.109
PassedMX300 G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> EX90
Verify whether thevideo call fromCisco TelePresenceMX300 G2 toCisco TelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager viaCollaboration Edgecan be establishedsuccessfully
Making videocall fromMX300 G2and EX90 bothregistered viaCollaborationEdge
UCJ11.5PH2S.VCS.G.113
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 123
Test Results SummaryCisco TelePresence Video Communication Server
PassedMX300 G2 -> UnifiedCM -> Cisco VCS ->Cisco VCS Expressway-> SX80 Codec ->Hold/T ransfer -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX80
Verify whether theconsultative calltransfer fromCiscoTelePresenceMX300 G2registered withCisco UnifiedCommunicationsManager viaCollaboration Edgeto Cisco DX80registered withCisco UnifiedCommunicationsManager workssuccessfully
Consultativecall transferfrom MX300G2 to DX80viaCollaborationEdge
UCJ11.5PH2S.VCS.G.115
PassedMX200 G2 -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> SX10 Quick SetMX200 G2 -> Add ->Cisco VCS Expressway->CiscoVCS ->UnifiedCM ->EX90(PresentationSharing)
Verify whetherpresentation can beshared successfullyin video conferenceamong CiscoTelePresenceMX200 G2registered withCisco UnifiedCommunicationsManager viaCollaborationEdge, CiscoTelePresence SX20Quick Set andCisco TelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager
SharingPresentation invideoconferenceamongMX200G2 , SX20Quick Set andEX90 viaCollaborationEdge
UCJ11.5PH2S.VCS.G.118
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan124
Test Results SummaryCisco TelePresence Video Communication Server
PassedSX80 Codec -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM -> DX70 SX80Codec -> Add -> CiscoVCS Expressway ->Cisco VCS -> UnifiedCM->EX90->Conference
Verify whether thevideo conferenceamong CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edge, Cisco DX70 andCisco TelePresenceSystem EX90Codec bothregistered withCisco UnifiedCommunicationsManager workssuccessfully
Making videoconferenceamong SX80Codec, DX70& EX90 viaCollaborationEdge
UCJ11.5PH2S.VCS.G.120
PassedIX5000 -> Unified CM-> DX80
Verify whethervideo call can bemade from CiscoTelePresenceIX5000 to CiscoTelePresenceDX80 withCollaborationEndpoint 8.2software bothregistered withCisco UnifiedCommunicationsManager
Make a videocall fromIX5000 toDX80with CE8.2 phone loadregistered toUnified CM
UCJ11.5PH2S.VCS.G.122
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 125
Test Results SummaryCisco TelePresence Video Communication Server
PassedIX5000 -> Unified CM-> SIP Trunk -> CiscoVCS -> DX80
Verify whetheraudio call can bemade from CiscoTelePresenceIX5000 registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresenceDX80 withCollaborationEndpoint 8.2software registeredwith CiscoTelePresenceVideoCommunicationServer
Audio callfrom IX5000to DX80 withCE 8.2 phoneload registeredwith CiscoVCS
UCJ11.5PH2S.VCS.G.126
PassedIX5000 -> Unified CM->DX70(10.2.5) IX5000-> Add -> Unified CM-> DX70(CE 8.2)
Verify whether acall from CiscoTelePresenceDX70 withCollaborationEndpoint 8.2software can beadded to CiscoTelePresenceIX5000 as a secondcall which isalready in a callwith Cisco DX70with 10.2.5software, allregistered withCisco UnifiedCommunicationsManager
Add anothercall to IX5000which isalready in acall withDX70 with10.2.5 phoneload
UCJ11.5PH2S.VCS.G.129
PassedNAVerify whetherCisco DX80continues to be inStatic IP modeafter Cisco DX80is upgraded to thelatest version
Static IP modein DX80 afterupgradingfrom one buildto another
UCJ11.5PH2S.DX.SR.002
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan126
Test Results SummaryCisco TelePresence Video Communication Server
PassedEX90 -> Cisco VCS ->Sip Trunk -> UnifiedCM -> EX60
Verify whethervideo call can bemade from CiscoTelePresenceSystem EX90registered withCisco TelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX60registered in CiscoUnifiedCommunicationsManager
Making videocall fromEX90registered inCisco VCS toEX60registered inUnified CM
UCJ11.5PH2S.TC7.SR.002
PassedIntegrator Package C90-> Unified CM -> EX90
Verify whethervideo call can bemade from CiscoTelePresenceSystem IntegratorPackage C90 toCisco TelePresenceSystem EX90 bothregistered in CiscoUnifiedCommunicationsManager
Making videocall fromIntegratorPackage C90to EX90
UCJ11.5PH2S.TC7.SR.005
PassedEX60 -> Cisco VCS->Sip Trunk -> UnifiedCM -> EX90
Verify whethervideo call can bemade from CiscoTelePresenceSystem EX60registered in CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX90registered in CiscoUnifiedCommunicationsManager
Making videocall fromEX60registered inCisco VCS toEX90registered inUnified CM
UCJ11.5PH2S.TC7.SR.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 127
Test Results SummaryCisco TelePresence Video Communication Server
PassedIntegrator Package C90-> Cisco VCS ->SipTrunk -> Unified CM ->EX60
Verify whethervideo call can bemade from CiscoTelePresenceSystem IntegratorPackage C90registered in CiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceSystem EX60registered in CiscoUnifiedCommunicationsManager
Making videocall fromIntegratorPackage C90registered inCisco VCS toEX60registered inUnified CM
UCJ11.5PH2S.TC7.SR.008
PassedNAVerify whetherTouch 8" logs isgenerated for CiscoTelePresenceSystem EX60 afterupgrading to TC7.3.6 successfully
CheckingTouch Devicelogs afterupgradingEX60 to TC7.3.6
UCJ11.5PH2S.TC7.SR.012
CSCux25293FailedSX80 Codec(Hold/Resume) -> CiscoVCS -> SIP Trunk ->Unified CM -> DX650
Verify whetherHold/Resume avideo call fromCisco TelePresenceSX80 Codecregistered withCisco TelePresenceVideoCommunicationServer to CiscoDX650 registeredwith Cisco UnifiedCommunicationsManager workssuccessfully
Hold/Resumea video callfrom SX80Codecregistered withCisco VCS toDX650registered withUnified CM
UCJ11.5S.VCS.G.109
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan128
Test Results SummaryCisco TelePresence Video Communication Server
CSCuz71479FailedDX70(Hold)->VCS->Siptrunk->UnifiedCM->SX10 Quick Set
Verify whether thecall is holdsuccessfully in callparticipant tab ofCisco TelePresenceDX70 which isregistered withCisco TelePresenceVideoCommunicationsServer
Check the callis hold in callparticipant tabof DX70
UCJ11.5PH2S.VCS.G.132
CSCuz80132FailedMX300-G2 -> UnifiedCM -> DX70
During video callfrom CiscoTelePresenceMX300-G2 withJapanese displayname to CiscoDX70 withJapanese locale,Japanese displayname is notdisplayed in CiscoDX70, bothregistered to CiscoUnifiedCommunicationsManager
CheckJapanesedisplay namein DX70 inJapaneselocale
UCJ11.5PH2S.VCS.G.133
CSCux51519FailedEX90 -> Unified CM ->DX80
Verify whetherlanguage can bechanged toJapanese for CiscoDX80 while in acall with CiscoTelePresenceSystem EX90 bothregistered withCisco UnifiedCommunicationsManager
Changinglanguage toJapanese inDX80registered withUnified CMwhile in a call
UCJ11.5S.VCS.G.110
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 129
Test Results SummaryCisco TelePresence Video Communication Server
CSCuz75359FailedMX200-G2->UnifiedCM->EX90(Mute)&SX10 Quick Set(sharedLine)
Verify whether thecall is mutedsuccessfully inCisco TelePresenceSystem EX90while retrieving thecall from CiscoTelePresence SX10Quick Set all areregistered in CiscoUnifiedCommunicationsManager which isin share line
Check the callis muted inEX90 whileretrieving thefirst line inshare line
UCJ11.5PH2S.VCS.G.134
CSCuz53989FailedNAVerify whetheruser is able tochange thelanguage in TCSWeb UIsuccessfully
Changelangauge toJapanese inTCS Web UI
UCJ11.5PH2S.VCS.G.135
CSCuz81984FailedSX10 QuickSet->Unified CM->SipTrunk->MCU 5320
Verify whetherMute Notication isdisplayed in CiscoTelePresence S10Quick Set isregistered withCisco UnifiedCommunicationsManager whilemuting the callfrom Cisco MCU5320 WebInterface
Mutenotification isnot displayedin SX10Quickset
UCJ11.5PH2S.VCS.G.136
Cisco TelePresence Multipoint Control UnitDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedMCU 5310 -> CiscoVCS -> MX200-G2
Verify whether CiscoTelePresenceMX200-G2 can beadded to a conferenceusing SIP registrar inCisco TelePresenceMCU 5310
AddingMX200-G2 tothe conferenceusing SIPRegistrar
UCJ11.5S.MCU.G.001
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan130
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedMCU 5310 -> CiscoVCS -> SX20Quick Set
Verify whether CiscoTelePresence SX20Quick Set can beadded to a conferenceusing SIP registrar inCisco TelePresenceMCU 5310
Adding SX20Quick Set tothe conferenceusing SIPRegistrar
UCJ11.5S.MCU.G.003
PassedMCU 4510-> CiscoVCS -> MX200-G2
Verify whether CiscoTelePresenceMX200-G2 can beadded to a conferenceusing SIP registrar inCisco TelePresenceMCU 4510
AddingMX200-G2 tothe conferenceusing SIPRegistrar inMCU 4510
UCJ11.5S.MCU.G.004
PassedMCU 5310-> CiscoVCS -> MX300-G2
Verify whether CiscoTelePresenceMX300-G2 can beadded to a conferenceusing SIP registrar inCisco TelePresenceMCU 5310
AddingMX300-G2 tothe conferenceusing SIPRegistrar
UCJ11.5S.MCU.G.005
PassedSX20Quick Set, EX90,MX200-G2 -> CiscoVCS -> MCU 5310 ->Presentation Sharing
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU5310 and share thepresentation fromCisco TelePresenceMX200-G2
Presentationsharing fromMX200-G2 inMeet Meconferenceusing MCU5310
UCJ11.5S.MCU.G.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 131
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedSX20Quick Set, EX90,SX80 Codec -> CiscoVCS -> MCU 5310 ->Presentation Sharing
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU5310 and share thepresentation fromCisco TelePresenceSX80 Codec
Presentationsharing fromSX80 Codec inMeet Meconferenceusing MCU5310
UCJ11.5S.MCU.G.007
PassedSX20 Quick Set ,MX200-G2 , EX90 ->Cisco VCS -> MCU4510 -> PresentationSharing
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU4510 and share thepresentation fromCisco TelePresenceSystem EX90
Presentationsharing fromEX90 in MeetMe conferenceusing MCU4510
UCJ11.5S.MCU.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan132
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedSX20 Quick Set ,MX200-G2, SX10Quick Set -> CiscoVCS-> MCU 4510 ->Presentation Sharing
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSX10 Quick Setregistered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU4510 and share thepresentation fromCisco TelePresenceSX10 Quick Set
Presentationsharing fromSX10 QuickSet inMeetMeconferenceusing MCU4510
UCJ11.5S.MCU.G.011
PassedSX20 Quick Set ,MX200-G2, SX80Codec -> Cisco VCS ->MCU 4510 ->Presentation Sharing
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX200-G2 andCisco TelePresenceSX80 Codecregistered in CiscoTelePresence VideoCommunicationServer can join theMeet Me conferencecall by CiscoTelePresence MCU4510 and share thepresentation fromCisco TelePresenceSX80 Codec
Presentationsharing fromSX80 Codec inMeet Meconferenceusing MCU4510
UCJ11.5S.MCU.G.012
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 133
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedSX20 Quick Set->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> 500-32 ->Hold/Resume
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem 500-32 all areregistered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 and holdand resume theconference call inCisco TelePresenceSystem 500-32
Hold andresume theAdhocconference callusing MCU5310 in 500-32
UCJ11.5PH2S.MCU.G.001
PassedSX20 Quick Set ->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> 500-32 ->Presentation Sharing
Verify whether theCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSystem 500-32 andCisco TelePresenceSX80 Codec all areregistered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 and sharethe presentation fromCisco TelePresenceSystem 500-32
Presentationsharing from500-32 inadhocconference callusing MCU5310
UCJ11.5PH2S.MCU.G.002
PassedSX20 Quickset,SX10Quick Set & DX650 ->Unified CM -> SipTrunk -> MCU 5310->Video Conference
Verify whetherjoining a Meet Meconference fromCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSX10 Quick Set &Cisco DX650registered CiscoUnifiedCommunicationsManager to CiscoTelePresence MCU5310
Initiate theMeet me videoconferencefrom SX20Quick Setusing MCU5310
UCJ11.5PH2S.MCU.G.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan134
Test Results SummaryCisco TelePresence Multipoint Control Unit
Passed500-32,DX650&DX80-> Unified CM -> SipTrunk -> MCU 5310 ->Video Conference
Verify whetherjoining a Meet Meconference fromCisco TelePresenceSystem 500-32, CiscoDX650 & CiscoDX80 registered withCisco UnifiedCommunicationsManager to CiscoTelePresence MCU5310
Initiate theMeet me videoconferencefrom 500-32using MCU5310
UCJ11.5PH2S.MCU.G.004
PassedSX20 Quick Set,SX10Quick Set & DX650->Unified CM -> SipTrunk -> MCU 5310
Verify Japanesemessage can be sentto all participants ina conference fromCisco TelePresenceMCU 5310
SendingJapanesemessage tousers while inconferencefrom MCU5310
UCJ11.5PH2S.MCU.G.005
PassedSX20 Quick Set ->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> MCU5310 -> IntegratorPackage C90 ->Presentation Sharing
Verify whether theCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSX80 Codec all areregistered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 andsharing thepresentation fromCisco TelePresenceSystem IntegratorPackage C90
Presentationsharing fromIntegratorPackageC90 inAdhocconference callusing MCU5310
UCJ11.5PH2S.MCU.G.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 135
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedSX20 Quick Set->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> MRGL -> MCU5310-> IntegratorPackage C90->Hold/Resume
Verify whether theCisco TelePresenceSX20 Quick Set,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem IntegratorPackage C90registered in CiscoUnifiedCommunicationsManager can join theconference call byCisco TelePresenceMCU 5310 andhold/resume theconference call inCisco TelePresenceSystem IntegratorPackage C90
Hold andresume theadhocconference callusing MCU5310 inIntegratorPackage C90
UCJ11.5PH2S.MCU.G.007
PassedMX300 G2 & MX200G2 -> Unified CM ->Sip Trunk -> MCU5320
Verify whether theMeet me Conferenceis initiatedsuccessfully fromCisco TelePresenceMX300 G2 & CiscoTelePresenceMX200G2 both registeredwith Cisco UnifiedCommunicationsManager using CiscoTelePresence MCU5320
Initiate Meetme Conferencefrom MX300G2 & MX200G2 usingMCU5320
UCJ11.5PH2S.MCU.G.008
PassedSX80 Codec,SX10Quick Set and MX300G2 -> Unified CM ->Sip Trunk -> MCU5320
Verify whether theMeet me Conferenceis initiatedsuccessfully fromCisco TelePresenceSX80 Codec ,CiscoTelePresence SX10Quick Set and CiscoTelePresenceMX300G2 all registered withCisco UnifiedCommunicationsManager using CiscoTelePresence MCU5320
Initiate theMeet meConferencefrom SX80Codec, SX10Quick Set andMX300 G2using MCU5320
UCJ11.5PH2S.MCU.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan136
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedSX20 Quick Set,SX10Quick Set & DX650 ->Unified CM -> SipTrunk -> MCU 5320
Verify Japanesemessage can be sentto all participants ina conference fromCisco TelePresenceMCU 5320
SendingJapanesemessage tousers while inconferenceusing MCU5320
UCJ11.5PH2S.MCU.G.014
PassedSX80 Codec & DX80-> Unified CM -> SipTrunk -> MCU 5320
Verify whether Meetme Conference isinitiated successfullyfrom CiscoTelePresence SX80Codec and CiscoDX80 both areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence MCU5320
Initiate theMeet meConferencefrom SX80Codec usingMCU 5320
UCJ11.5PH2S.MCU.G.015
PassedIntegrator Package C90& DX650->UnifiedCM->SipTrunk->MCU5320
Verify whether Meetme Conference isinitiated successfullyfrom CiscoTelePresenceIntegrator PackageC90 and CiscoDX650 both areregistered with CiscoUnifiedCommunicationsManager using CiscoTelePresence MCU5320
Initiate theMeet meConferencefrom IntegratorPackage C90using MCU5320
UCJ11.5PH2S.MCU.G.017
PassedEX60(Hold AndResume)->UnifiedCM->SipTrunk->MCU5320
Verify whether Holdand resume the Meetme Conference fromCisco TelePresenceSystem EX60 whichis registered withCisco UnifiedCommunicationsManager workssuccessfully usingCisco TelePresenceMCU 5320
Hold andresume theMeet meConferencefrom EX60using MCU5320
UCJ11.5PH2S.MCU.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 137
Test Results SummaryCisco TelePresence Multipoint Control Unit
PassedSX20 Quick Set->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM->MRGL->MCU 5320-> MX300 G2 ->Hold/Resume
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceMX300 G2 all areregistered in CiscoUnifiedCommunicationsManager can join theconference call usingCisco TelePresenceMCU 5320 and Holdand resume theconference call inCisco TelePresenceMX300 G2
Hold andresume theAdhocConferencecall usingMCU 5320 inMX300 G2
UCJ11.5PH2S.MCU.G.020
PassedSX20 Quick Set ->Unified CM -> SX80Codec SX20 Quick Set-> Add -> Unified CM-> SX20 QuickSet(Hold and Resume)->UnifiedCM->MRGL-> MCU 5320 -> SX20Quick Set ->Hold/Resume
Verify whether theCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSX20 Quick Set allare registered withCisco UnifiedCommunicationsManager can join theconference call usingCisco TelePresenceMCU 5320 and Holdand resume theconference call inCisco TelePresenceSX20 Quick Set
Hold andresume theAdhocConferencecall usingMCU 5320 inSX20 QuickSet
UCJ11.5PH2S.MCU.G.022
Cisco TelePresence Management SuiteDefectsStatusCall Component FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan138
Test Results SummaryCisco TelePresence Management Suite
PassedNAVerify whether thesystem upgrade toCE8.0 software forCiscoTelePresenceMX200-G2 havingJapanese systemname anddescription workssuccessfully inCiscoTelePresenceManagement Suite
System upgradeof MX200-G2to CE8.0 havingJapanese SystemName anddescription
UCJ11.5S.TMS.G.001
PassedNAVerify whetherbackup can betaken for CiscoTelePresenceSX80 Codechaving Japanesesystem name inCiscoTelePresenceManagement Suite
Backup forSX80 Codechaving Japanesename usingCisco TMS
UCJ11.5S.TMS.G.002
PassedNAVerify whetherrestore can betaken for CiscoTelePresenceSX80 Codechaving Japanesesystem name inCiscoTelePresenceManagement Suite
Restore forSX80 Codechaving Japanesename usingCisco TMS
UCJ11.5S.TMS.G.003
PassedNAVerify whethernon-defaultcredentials can beused while probingand adding CiscoTelePresenceSX80 Codec inCiscoTelePresenceManagement Suite
Non-defaultcredentials forSX80 Codecwhile adding inCisco TMS
UCJ11.5S.TMS.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 139
Test Results SummaryCisco TelePresence Management Suite
PassedNAVerify whetheradmin password ofCiscoTelePresenceSX80 Codec canbe changed inCiscoTelePresenceManagement Suite
Change AdminPassword ofSX80 Codec inCisco TMS
UCJ11.5S.TMS.G.005
PassedNAVerify whetherSystem name ofCiscoTelePresenceSX10 Quick Setcan be changed inCiscoTelePresenceManagement Suite
Change SystemName of SX10Quick Set inCisco TMS
UCJ11.5S.TMS.G.006
PassedCisco TMS -> Conductor-> Cisco TS on VM ->CiscoVCS ->MX300-G2-> MX200-G2 -> SX20Quick Set
Verify whether ascheduledconferenceparticipant (CiscoTelePresenceMX300-G2) canbe removed fromConferenceControl Centerduring a scheduledconference inCiscoTelePresenceManagement Suite
Remove aparticipant fromConferenceControl Centerduring ascheduledconference
UCJ11.5S.TMS.G.007
PassedNAVerify whetherXMLConfigurationtemplate can beadded for CiscoTelePresenceMX300-G2 inCE8.0 in CiscoTelePresenceManagement SuiteProvisioningExtension
AddconfigurationXML Templateof MX300-G2in CiscoTMSPE
UCJ11.5S.TMS.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan140
Test Results SummaryCisco TelePresence Management Suite
PassedNAVerify whetherXMLConfigurationtemplate can beadded for CiscoTelePresenceSX10 Codec inCE8.0 in CiscoTelePresenceManagement SuiteProvisioningExtension
AddconfigurationXML Templateof SX80 Codecin CiscoTMSPE
UCJ11.5S.TMS.G.010
PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->MCU4510->MX200 G2,MX300 G2, SX20 QuickSet
Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer using CiscoTelePresenceMCU 4510 viaPeer CiscoTelePresenceConductor after theprimaryTelePresenceConductor goesdown
Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing MCU4510 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
UCJ11.5PH2S.TMS.G.001
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 141
Test Results SummaryCisco TelePresence Management Suite
PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->MCU5310->MX200 G2,MX300 G2, SX20 QuickSet
Scheduled videoconferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered to CiscoTelePresenceVideoCommunicationServerUsingCiscoTelePresenceMCU 5310 viapeer CiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing MCU5310 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
UCJ11.5PH2S.TMS.G.002
PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->Cisco TS onVM->MX200 G2,MX300 G2, SX20 QuickSet
Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCiscoTelePresenceVideoCommunicationServer using CiscoTelePresenceServer on VM viaPeer CiscoTelePresenceConductor after theprimaryTelePresenceConductor goesdown
Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing Cisco TSon VM via peerTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
UCJ11.5PH2S.TMS.G.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan142
Test Results SummaryCisco TelePresence Management Suite
PassedCisco TMS->CiscoVCS->Peer TelePresenceConductor ->Cisco TS7010->MX200 G2,MX300 G2, SX20 QuickSet
Scheduled videoconferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered to CiscoTelePresenceVideoCommunicationServerUsingCiscoTS 7010 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toCisco VCSUsing Cisco TSon 7010 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
UCJ11.5PH2S.TMS.G.004
PassedCisco TMS->UnifiedCM->Peer TelePresenceConductor ->MCU5310->MX200 G2,MX300 G2, SX20 QuickSet
Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCisco UnifiedCommunicationsManager usingCisco MCU 5310via Peer CiscoTelePresenceConductor after theprimaryTelePresenceConductor goesdown
Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toUnified CMUsing MCU5310 via peerCiscoTelePresenceConductor afterPrimaryTelePresenceConductor goesdown
UCJ11.5PH2S.TMS.G.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 143
Test Results SummaryCisco TelePresence Management Suite
PassedCisco TMS->UnifiedCM->2nd PeerTelePresence Conductor->Cisco TS7010->MX200 G2,MX300 G2, SX20 QuickSet
Verify that user isable to Schedulethe conferencebetween CiscoTelePresenceMX200 G2, CiscoTelePresenceMX300 G2 &CiscoTelePresenceSX20 Quick Setregistered withCisco UnifiedCommunicationsManager usingCiscoTelePresenceServer 7010 via2nd Peer CiscoTelePresenceConductor after theprimary CiscoTelePresenceConductor and 1stpeer CiscoTelePresenceConductor goesdown
Scheduled videoconferencebetweenMX200G2, MX300 G2& SX20 QuickSet registered toUnified CMUsing Cisco TS7010 via 2ndpeerTelePresenceConductor afterPrimaryTelePresenceConductor and1st peerTelePresenceConductor goesdown
UCJ11.5PH2S.TMS.G.008
PassedNAVerify whetherCiscoTelePresenceDX70 runningCE8.2 phone loadcan be added andprovisioned viaCiscoTelePresenceManagement Suite
Add DX70 withCE8.2 to CiscoTMS
UCJ11.5PH2S.TMS.G.009
PassedNAVerify whetherCiscoTelePresenceManagement Suitecan be installed inESXi 6.0successfully
Install CiscoTMS in ESXi6.0
UCJ11.5PH2S.TMS.G.011
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan144
Test Results SummaryCisco TelePresence Management Suite
Cisco TelePresence ConductorDefectsStatusCall Component FlowDescriptionTitleLogical ID
PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> Full HD MeetingConferenceSX20 Quick Set -> UnifiedCM -> Conductor -> CiscoTS 7010 -> Full HDMeeting Conference ->Presentation Sharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceSX20 QuickSet(user) assignedwith PMPLicenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDMeetingconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor
Presentationsharing fromSX20 QuickSet (user)assignedwithPMP Licensewhen joininga Full HDMeetingConferencemanaged byCisco TS7010 inConductor
UCJ11.5S.TC.G.001
PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> Full HD LectureConferenceMX200-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> Full HD LectureConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2(user)assigned withPMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDLectureconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor
Presentationsharing fromMX200-G2(user)assignedwithPMP Licensewhen joininga Full HDLectureConferencemanaged byCisco TS7010 inConductor
UCJ11.5S.TC.G.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 145
Test Results SummaryCisco TelePresence Conductor
PassedDX70 -> Unified CM ->Conductor -> TelePresenceServer on VM -> Full HDLecture ConferenceMX300-G2 -> Unified CM-> Conductor ->TelePresence Server on VM-> Full HD LectureConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withPMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDLectureconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor
Presentationsharing fromMX300-G2(user)assignedwithPMP Licensewhen joininga Full HDLectureConferencemanaged byTelePresenceServer onVM inConductor
UCJ11.5S.TC.G.004
PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> Full HD MeetingConferenceMX300-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> Full HD MeetingConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDMeetingconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor
Presentationsharing fromMX300-G2(user)assignedwithSMP Licensewhen joininga Full HDMeetingConferencemanaged byCisco TS7010 inConductor
UCJ11.5S.TC.G.005
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan146
Test Results SummaryCisco TelePresence Conductor
PassedDX80 -> Unified CM ->Conductor -> TelePresenceServer on VM -> Full HDMeeting ConferenceMX200-G2 -> Unified CM-> Conductor ->TelePresence Server on VM-> Full HD MeetingConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDMeetingconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor
Presentationsharing fromMX200-G2(user)assignedwithSMP Licensewhen joininga Full HDMeetingConferencemanaged byTelePresenceServer onVM inConductor
UCJ11.5S.TC.G.006
PassedDX70 -> Unified CM ->Conductor -> TelePresenceServer on VM -> Full HDLecture ConferenceMX300-G2 -> Unified CM-> Conductor ->TelePresence Server on VM-> Full HD LectureConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a Full HDLectureconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor
Presentationsharing fromMX300-G2(user)assignedwithSMP Licensewhen joininga Full HDLectureConferencemanaged byTelePresenceServer onVM inConductor
UCJ11.5S.TC.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 147
Test Results SummaryCisco TelePresence Conductor
PassedEX90 -> Unified CM ->Conductor -> TelePresenceServer on VM -> HDMeeting ConferenceSX10 Quick Set -> UnifiedCM -> Conductor ->TelePresence Server on VM-> HD Meeting Conference-> Presentation Sharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceSX10 QuickSet(user) assignedwith PMPLicenseregistered in CiscoUnifiedCommunicationsManager afterjoining a HDMeetingconferencemanaged byCiscoTelePresenceServer on VM inCiscoTelePresenceConductor
Presentationsharing fromSX10 QuickSet(user)assignedwithPMP Licensewhen joininga HDMeetingConferencemanaged byTelePresenceServer onVM inConductor
UCJ11.5S.TC.G.010
PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> HD Lecture ConferenceMX200-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> HD LectureConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX200-G2(user)assigned withPMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a HDLectureconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor
Presentationsharing fromMX200-G2(user)assignedwithPMP Licensewhen joininga HD LectureConferencemanaged byCisco TS7010 inConductor
UCJ11.5S.TC.G.011
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan148
Test Results SummaryCisco TelePresence Conductor
PassedEX90 -> Unified CM ->Conductor ->Cisco TS 7010-> HD Meeting ConferenceMX300-G2 -> Unified CM-> Conductor -> Cisco TS7010 -> HD MeetingConference -> PresentationSharing
Verify whetherpresentation canbe shared fromCiscoTelePresenceMX300-G2(user)assigned withSMP Licenseregistered in CiscoUnifiedCommunicationsManager afterjoining a HDMeetingconferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor
Presentationsharing fromMX300-G2(user)assignedwithSMP Licensewhen joininga HDMeetingConferencemanaged byCisco TS7010 inConductor
UCJ11.5S.TC.G.013
PassedEX60 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conferenceEX90 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conference
Verify whetherStart time of theconference for theendpointsregistered withCiscoTelePresenceVideoCommunicationServer isdisplayed inActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010
Checking theStart time oftheconferencefrom ActiveMeetingManagerusingTMSPE withConductor
UCJ11.5S.TC.G.014
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 149
Test Results SummaryCisco TelePresence Conductor
PassedEX60 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conferenceEX90 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conference
Verify whethermuting aparticipant in aconferenceregistered withCiscoTelePresenceVideoCommunicationServer fromActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010
Muting aparticipant ina conferencefrom ActiveMeetingManagerusingTMSPE withConductor
UCJ11.5S.TC.G.015
PassedEX60 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conferenceEX90 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conference
Verify whetherunmuting aparticipant whichis placed in mutein a conferenceregistered withCiscoTelePresenceVideoCommunicationServer fromActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010
Unmuting aparticipant oftheconferencefrom ActiveMeetingManagerusingTMSPE withConductor
UCJ11.5S.TC.G.016
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan150
Test Results SummaryCisco TelePresence Conductor
PassedEX60 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conferenceEX90 -> Cisco VCS ->Conductor ->Cisco TS 7010->CMRmeeting conference
Verify whethermuting all theparticipants in theconferenceregistered withCiscoTelePresenceVideoCommunicationServer fromActive MeetingManager usingCiscoTelePresenceManagementSuite ProvisioningExtensionintegrated withCiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010
Muting alltheparticipantsin theconferencefrom ActiveMeetingManagerusingTMSPE withConductor
UCJ11.5S.TC.G.017
PassedNAVerify whethernew page underConferenceConfiguration ->Global settings inadded in CiscoTelePresenceConductor afterupgrading toXC4.1
New pageunderConferenceConfigurationin Conductor
UCJ11.5S.TC.G.019
PassedNAVerify whetherusage report canbe downloaded inCiscoTelePresenceConductor
Usage ReportCollection inConductor
UCJ11.5S.TC.G.020
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 151
Test Results SummaryCisco TelePresence Conductor
PassedNAVerify whetherCiscoTelePresenceConductor can beintegrated withCiscoTelePresenceManagementSuite ProvisioningExtension version1.6 installed withJava 8 platform
IntegratingTelePresenceConductorwith TMSPEversion 1.6installed withJava 8platform
UCJ11.5PH2S.TC.G.001
PassedNAVerify whetherJapanese localecan be selected fora conferenceunder ConferenceConfiguration ->ConferenceLocalization inCiscoTelePresenceConductor
Selection ofLocale forConferenceunderConferenceLocalizationinTelePresenceConductor
UCJ11.5PH2S.TC.G.002
PassedSX10 Quick Set -> UnifiedCM -> TelePresenceConductor ->Cisco TS 7010-> Meeting Conference
Verify whetherJapaneseMessageindicationdisplayed in CiscoTelePresenceSX10 Quick Setwhen it joins aMeetingConferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor havingJapanese locale
JapaneseMessageindication inSX10 QuickSet afterjoining aMeetingConferencemanaged byCisco TS7010 whenJapaneselocale isselected inTelePresenceConductor
UCJ11.5PH2S.TC.G.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan152
Test Results SummaryCisco TelePresence Conductor
PassedSX20 Quick Set -> UnifiedCM -> TelePresenceConductor ->Cisco TS 7010-> Meeting Conference
Verify whetherJapanese AudioPrompt is heardfrom CiscoTelePresenceSX20 Quick Setwhen it joins aMeetingConferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor havingJapanese locale
JapaneseAudioPrompt inSX20 QuickSet afterjoining aMeetingConferencemanaged byCisco TS7010 whenJapaneselocale isselected inTelePresenceConductor
UCJ11.5PH2S.TC.G.004
PassedSX10 Quick Set -> UnifiedCM -> TelePresenceConductor ->Cisco TS 7010-> Meeting Conference
Verify whethercustom messagedisplays inEnglish in CiscoTelePresenceSX10 Quick Setwhen it joins aMeetingConferencemanaged byCiscoTelePresenceServer 7010 inCiscoTelePresenceConductor havingJapanese locale
AdvancedParametersoverridesGlobalParameterSettings inTelePresenceConductor
UCJ11.5PH2S.TC.G.005
PassedMX200 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS on VM ->Meeting Conference
Verify whetherMeetingConferencemanaged byCiscoTelePresenceServer on VMtakes place withTemporaryMultipartyLicense installedin CiscoTelePresenceConductor
MeetingConferencewithTemporaryMulti-Partylicenseinstalled inTelePresenceConductormanaged byCisco TS onVM
UCJ11.5PH2S.TC.G.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 153
Test Results SummaryCisco TelePresence Conductor
PassedMX300 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS 7010 ->Meeting Conference
Verify whether noalarms is raised ina MeetingConference takingplace withTemporaryMultipartyLicense installedin CiscoTelePresenceConductormanaged byCiscoTelePresenceServer 7010
No Alarmsraised in aMeetingConferencetaking placewithTemporaryMultipartylicenseinstalled inTelePresenceConductormanaged byCisco TS7010
UCJ11.5PH2S.TC.G.009
PassedMX300 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS on VM -> FullHD Lecture Conference
Verify whetherFull HD LectureConferencemanaged byCiscoTelePresenceServer on VMtakes place withTemporaryMultipartyLicense installedin CiscoTelePresenceConductor
Full HDLectureConferencewithTemporaryMulti-Partylicenseinstalled inTelePresenceConductormanaged byCisco TS onVM
UCJ11.5PH2S.TC.G.010
PassedMX200 G2 -> Unified CM-> TelePresence Conductor-> TelePresence Server onVM -> HD LectureConference
Verify whetherHD LectureConferencemanaged byCiscoTelePresenceServer on VMtakes place withTemporaryMultipartyLicense installedin CiscoTelePresenceConductor
HD LectureConferencewithTemporaryMulti-Partylicenseinstalled inTelePresenceConductormanaged byCisco TS onVM
UCJ11.5PH2S.TC.G.011
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan154
Test Results SummaryCisco TelePresence Conductor
PassedSX10 Quick Set -> UnifiedCM -> TelePresenceConductor ->Cisco TS 7010-> Meeting Conference
Verify whetherOut ofComplianceBanner isdisplayed in CiscoTelePresenceSX10 Quick SetOSD while theTemporaryMultiparty licenseexpires in CiscoTelePresenceConductor in aMeetingConference
Out ofComplianceBannerdisplays inSX10 QuickSet OSDwhen theTemporaryMultipartyLicenseexpires inTelePresenceConductorfor a MeetingConference
UCJ11.5PH2S.TC.G.012
PassedMX200 G2 -> Unified CM-> TelePresence Conductor-> Cisco TS 7010 ->Meeting Conference
Verify whetherOut ofComplianceBanner isdisplayed for 1minute in CiscoTelePresenceMX200 G2 OSDwhile theTemporaryMultiparty licenseexpires in CiscoTelePresenceConductor in aMeetingConference
Out ofComplianceBannerdisplays for 1minute inMX200 G2OSD whentheTemporaryMultipartyLicenseexpires inTelePresenceConductorfor a MeetingConference
UCJ11.5PH2S.TC.G.014
Cisco TelePresence ServerDefectsStatusCall Component
FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 155
Test Results SummaryCisco TelePresence Server
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk -> CiscoTS 7010
Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS7010, all areregisteredwith UnifiedCM
UCJ11.5S.TS.G.001
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS 7010
Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010managed by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andDX70 usingTS 7010managed byConductor,endpoints areregisteredwith UnifiedCM
UCJ11.5S.TS.G.002
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan156
Test Results SummaryCisco TelePresence Server
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS on VM
Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer on VMmanaged by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS onVM managedby Conductor,endpoints areregisteredwith UnifiedCM
UCJ11.5S.TS.G.003
PassedSX80 Codec, SX10Quick Set andMX200-G2 (SIP) ->Cisco VCS -> CiscoTS 7010
Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX10Quick Set andCisco TelePresenceMX200-G2 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco TelePresenceVideoCommunicationServer as SIPendpoints
Long durationMeet Meconferenceamong SX80Codec, SX10Quick Set andMX200-G2using CiscoTS 7010,endpoints areregisteredwith CiscoVCS as SIPendpoints
UCJ11.5S.TS.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 157
Test Results SummaryCisco TelePresence Server
PassedSX80 Codec, SX20Quick Set andMX200-G2 (H323)-> Cisco VCS ->Cisco TS 7010
Verify whetherlong duration MeetMe conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresence SX20Quick Set andCisco TelePresenceMX200-G2 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco TelePresenceVideoCommunicationServer as H323endpoints
Long durationMeet Meconferenceamong SX80Codec, SX20Quick Set andMX200-G2using CiscoTS 7010,endpoints areregisteredwith CiscoVCS as H323endpoints
UCJ11.5S.TS.G.005
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS 7010 ->Presentation Sharing
Verify whetherlong duration MeetMe conferencewith presentationsharing amongCisco TelePresenceSX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010managed by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Long durationMeet Meconferencewithpresentationsharing amongSX80 Codec,SX10 QuickSet and DX70using CiscoTS 7010managed byConductor,endpoints areregisteredwith UnifiedCM
UCJ11.5S.TS.G.007
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan158
Test Results SummaryCisco TelePresence Server
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS on VM ->Presentation Sharing
Verify whetherlong duration MeetMe conferencewith presentationsharing amongCisco TelePresenceSX80Codec, CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer on VMmanaged by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Long durationMeet Meconferencewithpresentationsharing amongSX80 Codec,SX10 QuickSet and DX70using CiscoTS on VMmanaged byConductor,endpoints areregisteredwith UnifiedCM
UCJ11.5S.TS.G.008
PassedSX80 Codec, SX10Quick Set andMX200-G2 (H323)-> Cisco VCS ->Cisco TS 7010 ->Presentation Sharing
Verify whetherlong duration MeetMe conferencewith presentationsharing amongCisco TelePresenceSX80Codec, CiscoTelePresence SX20Quick Set andCisco TelePresenceMX200-G2 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco TelePresenceVideoCommunicationServer as H323endpoints
Long durationMeet Meconferencewithpresentationsharing amongSX80 Codec,SX20 QuickSet andMX200-G2using CiscoTS 7010,endpoints areregisteredwith CiscoVCS as H323endpoints
UCJ11.5S.TS.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 159
Test Results SummaryCisco TelePresence Server
PassedSX80 Codec, SX10Quick Set &MX200-G2 ->Unified CM -> SIPTrunk -> Cisco TS7010 -> Disconnect( SX80 Codec )
Verify whether theuser is able isdisconnect CiscoTelePresence SX80Codec which is inMeet meconference withCisco TelePresenceSX10 Quick Setand CiscoTelePresenceMX200-G2 usingCisco TelePresenceServer 7010 WebUI , endpoints areregistered withCisco UnifiedCommunicationsManager
DisconnectSX80 CodecfromMeetMeconferenceusing CiscoTS 7010 WebUI
UCJ11.5S.TS.G.011
PassedSX10 Quick Set &MX200-G2 ->Unified CM -> SIPTrunk -> Cisco TS7010 -> call -> SX80Codec
Verify whether theuser is able is callCisco TelePresenceSX80 Codec forMeet Meconference fromCisco TelePresenceServer 7010, andCisco TelePresenceSX80 Codec joinsthe conferencesuccessfully ,endpoints areregistered withCisco UnifiedCommunicationsManager
Call SX80Codec forMeet MeconferencefromCisco TS7010
UCJ11.5S.TS.G.012
PassedSX10 Quick Set,MX200-G2 &DX80-> Unified CM ->SIP Trunk -> CiscoTS 7010
Verify whetheruser is able to sendmessage to CiscoDX80 from CiscoTelePresenceServer 7010 duringconference andendpoints inconference areregistered withCisco UnifiedCommunicationsManager
Send messageto DX80 fromCisco TS7010 duringconference
UCJ11.5S.TS.G.013
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan160
Test Results SummaryCisco TelePresence Server
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk -> CiscoTS 7010 ->Hold\Resume
Verify whetherHold/Resume inCisco TelePresenceSX80Codec duringlong duration MeetMe conferencewith CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer 7010 workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Hold/Resumein longduration MeetMeconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS7010, all areregisteredwith UnifiedCM
UCJ11.5S.TS.G.014
PassedSX80 Codec, SX10Quick Set and DX70-> Unified CM ->SIP Trunk ->Conductor -> CiscoTS on VM ->Hold\Resume
Verify whetherHold/Resume inCisco TelePresenceSX80Codec duringlong duration MeetMe conferencewith CiscoTelePresence SX10Quick Set andCisco DX70 usingCisco TelePresenceServer on VMmanaged by CiscoTelePresenceConductor workssuccessfully,endpoints areregistered withCisco UnifiedCommunicationsManager
Hold\Resumein longduration MeetMeconferenceamong SX80Codec, SX10Quick Set andDX70 usingCisco TS onVM managedby Conductor,endpoints areregisteredwith UnifiedCM
UCJ11.5S.TS.G.016
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 161
Test Results SummaryCisco TelePresence Server
PassedMX200G2->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can see thenew lobby screenfrom CiscoTelePresenceMX200 G2registered withCisco UnifiedCommunicationsManager can joinMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor
Joining MeetmeConferencefrom MX200G2 managedby Cisco TSon VM viaTelePresenceConductor andthe check thenew lobbyscreen
UCJ11.5PH2S.TS.G.001
PassedMX200 G2(PairedwithiPhone)->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can join Meetme Conferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX200 G2 whichis registered withCisco UnifiedCommunicationsManager whileentering the correctPIN from iPhonewhich is pairedCisco TelePresenceMX200 G2 viaCisco Proximity
Joining MeetmeConferencefrom MX200G2 managedby Cisco TSon VM viaTelePresenceConductor andenter thecorrect PINfrom iPhonewhich ispaired withMX200 G2via Proximity
UCJ11.5PH2S.TS.G.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan162
Test Results SummaryCisco TelePresence Server
PassedMX300 G2(PairedwithiPhone)->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can join Meetme Conferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX300 G2 whichis registered withCisco UnifiedCommunicationsManager whileentering the correctPIN from iPhonewhich is pairedCisco TelePresenceMX300 G2 viaCisco Proximity
Joining MeetmeConferencefrom MX300G2 managedby Cisco TSon VM viaTelePresenceConductor andenter thecorrect PINfrom iPhonewhich ispaired withMX300 G2via Proximity
UCJ11.5PH2S.TS.G.004
PassedSX10 Quick Set->Unified CM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can hear theaudio prompt fromCisco TelePresenceSX10 Quick Setwhich is registeredwith Cisco UnifiedCommunicationsManager whilejoining Meet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor
Joining MeetmeConferencefrom SX10Quick Setmanaged byCisco TS onVM viaTelePresenceConductor andthe check thenew audioprompt
UCJ11.5PH2S.TS.G.005
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 163
Test Results SummaryCisco TelePresence Server
PassedMX200 G2,SX10Quick Set & SX20Quick Set->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can hear theaudio prompt whileending theMeetmeConference fromCisco TelePresenceMX200 G2 duringthe Meet meConference amongCisco TelePresenceMX200 G2 , CiscoTelePresence SX10Quick Set & CiscoTelePresence SX20Quick Set all areregistered withCisco UnifiedCommunicationsManager managedby CiscoTelePresenceServer on VM viaCisco TelePresenceConductor
Joining MeetmeConferenceamongMX200 G2 ,SX10 QuickSet & SX20Quick Setmanaged byCisco TS onVM viaTelePresenceConductor andcheck theaudio promptwhen theconference isended fromMX200 G2
UCJ11.5PH2S.TS.G.007
PassedDX650->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can hear theaudio prompt tojoin Meet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco DX650which is registeredwith Cisco UnifiedCommunicationsManager whileentering theincorrect PIN fromCisco DX650
Joining MeetmeConferencefrom DX650managed byCisco TS onVM viaTelePresenceConductor byentering theincorrect PINfrom DX650and check theaudio prompt
UCJ11.5PH2S.TS.G.008
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan164
Test Results SummaryCisco TelePresence Server
PassedMX200G2(PresentationSharing),SX10QuickSet & SX20 QuickSet->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can see thepresenter icon inMeet meConference fromCisco TelePresenceMX200 G2 duringthe Meet meConferencemanaged by CiscoTelePresenceServer on VM viaCisco TelePresenceConductor amongCisco TelePresenceMX200 G2 , CiscoTelePresence SX10Quick Set & CiscoTelePresence SX20Quick Set all areregistered withCisco UnifiedCommunicationsManager
Joining MeetmeConferenceamongMX200 G2 ,SX10 QuickSet & SX20Quick Setmanaged byCisco TS onVM viaTelePresenceConductor andcheck thepresenter iconin Meet meConferencefrom MX200G2
UCJ11.5PH2S.TS.G.010
PassedNAVerify whether theuser can installCisco TelePresenceServer on VM inESXi6.0successfully
Install CiscoTS on VM inESXi 6.0
UCJ11.5PH2S.TS.G.011
PassedMX200G2->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can see thewelcome screen tojoin Meet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX200 G2 whichis registered withCisco UnifiedCommunicationsManager
Joining MeetmeConferencefrom MX200G2 managedby Cisco TSon VM viaTelePresenceConductor andcheck thewelcomescreen
UCJ11.5PH2S.TS.G.012
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 165
Test Results SummaryCisco TelePresence Server
PassedDX650->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser unable to joinMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco DX650which is registeredwith Cisco UnifiedCommunicationsManager whileentering the correctPIN from CiscoDX650 after 2incorrect entries
Joining MeetmeConferencefrom DX650managed byCisco TS onVM viaTelePresenceConductor andenter thecorrect PINfrom DX650after 2incorrectentries
UCJ11.5PH2S.TS.G.014
PassedMX300G2->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can hear theaudio prompt inJapanese to joinMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX300 G2 whichis registered withCisco UnifiedCommunicationsManager
Joining MeetmeConferencefrom MX300G2 managedby Cisco TSon VM viaTelePresenceConductor andcheck theaudio promptin Japanese
UCJ11.5PH2S.TS.G.015
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan166
Test Results SummaryCisco TelePresence Server
PassedMX300G2->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can hear theaudio prompt inJapanese to endMeet meConferencemanaged by CiscoTelePresenceServer on VM inCisco TelePresenceConductor fromCisco TelePresenceMX300 G2 whichis registered withCisco UnifiedCommunicationsManager
End Meet meConferencefrom MX300G2 managedby Cisco TSon VM viaTelePresenceConductor andcheck theaudio promptin Japanese
UCJ11.5PH2S.TS.G.016
PassedMX300G2(PresentationSharing),SX10QuickSet &EX90->UnifiedCM->SipTrunk->TelePresenceConductor->CiscoTS onVM->MeetmeConference
Verify whether theuser can see thepresenter icon inMeet meConference fromCisco TelePresenceMX300 G2 duringthe Meet meConferencemanaged by CiscoTelePresenceServer on VM viaCisco TelePresenceConductor amongCisco TelePresenceMX300 G2 , CiscoTelePresence SX10Quick Set & CiscoTelePresenceSystem EX90 allare registered withCisco UnifiedCommunicationsManager
Joining MeetmeConferenceamongMX300 G2 ,SX10 QuickSet & EX90managed byCisco TS onVM viaTelePresenceConductor andcheck thepresenter iconin Meet meConferencefrom MX300G2
UCJ11.5PH2S.TS.G.018
Cisco TelePresence Content ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 167
Test Results SummaryCisco TelePresence Content Server
PassedMX300 G2, MX200 G2& SX80 Codec->Unified CM->SIPTrunk->MCU 5310MX300 G2->UnifiedCM-> SIPTrunk->Content Server
To verify that user isable to streaming livevideo conferencebetween CiscoTelePresence MX300G2 ,Cisco TelePresenceMX200 G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5310 using CiscoTelePresence ContentServer
Streaming livevideoconferencecall betweenMX300 G2,MX200G2&SX80 Codecregisteredwith UnifiedCM via MCU5310 usingContentServer
UCJ11.5PH2S.TCS.G.001
PassedSX10Quick Set,MX200G2 & SX80 Codec->Unified CM->SIPTrunk-> MCU 5320MX200 G2->UnifiedCM-> SIPTrunk->Content Server
To verify that user isable to streaming livevideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence MX200G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer
Streaming livevideoconferencecall betweenSX10 QuickSet, ,MX200G2 & SX80Codecregisteredwith UnifiedCM via MCU5320 usingContentServer
UCJ11.5PH2S.TCS.G.002
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan168
Test Results SummaryCisco TelePresence Content Server
PassedSX10 Quick Set, SX20Quick Set & SX80Codec-> UnifiedCM->SIPTrunk->Conductor->CiscoTS 7010 SX20 QuickSet->Unified CM-> SIPTrunk->Content Server
To verify that user isable to streaming livevideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence SX20Quick Set & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence Server7010 with CiscoTelePresenceConductor using CiscoTelePresence ContentServer
Streaming livevideoconferencecall betweenSX10 QuickSet, ,SX20Quick Set &SX80 Codecregisteredwith UnifiedCM via CiscoTS 7010 withTelePresenceConductorusing ContentServer
UCJ11.5PH2S.TCS.G.003
PassedEX90-> UnifiedCM->EX60 EX90->Add->Unified CM->Integrator Package C90EX90->Unified CM->SIP Trunk->ContentServer
To verify that user isable to Streaming livevideo conference callbetween CiscoTelePresence SystemEX90 ,CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoUnifiedCommunicationsManager using CiscoTelePresence ContentServer
Streaming livevideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith UnifiedCM usingContentServer
UCJ11.5PH2S.TCS.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 169
Test Results SummaryCisco TelePresence Content Server
PassedEX90-> CiscoVCS->EX60 EX90->Add->Cisco VCS->Integrator Package C90EX90->CiscoVCS->Content Server
To verify that user isable to Streaming livevideo conference callbetween CiscoTelePresence SystemEX90 ,CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoTelePresence VideoCommunication Serverusing CiscoTelePresence ContentServer
Streaming livevideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith CiscoVCS usingContentServer
UCJ11.5PH2S.TCS.G.005
PassedMX300 G2-> UnifiedCM->MX200 G2MX300 G2->UnifiedCM->SIPTrunk->Content Server
To verify that user isable to Record videocall between CiscoTelePresence MX300G2 & CiscoTelePresence MX200G2 registered withCisco UnifiedCommunicationsManager using CiscoTelePresence ContentServer
Recordingvideo callbetweenMX300 G2 &MX200 G2Registeredwith UnifiedCM usingContentServer
UCJ11.5PH2S.TCS.G.006
PassedSX20 Quick Set-> CiscoVCS->SX80 CodecSX20 Quick Set->CiscoVCS->Content Server
To verify that user isable to Record videocall between CiscoTelePresence SX20Quick Set & CiscoTelePresence SX80Codec registered withCisco TelePresenceVideo CommunicationServer using CiscoTelePresence ContentServer
Recordingvideo callbetweenSX20Quick Set &SX80 Codecregisteredwith CiscoVCS usingContentServer
UCJ11.5PH2S.TCS.G.007
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan170
Test Results SummaryCisco TelePresence Content Server
PassedSX20 Quick Set->Unified CM->SIPTrunk->CiscoVCS->SX80 CodecSX80 Codec->CiscoVCS->Content Server
To verify that user isable to Record videocall between CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager & CiscoTelePresence SX80Codec registered withCisco TelePresenceVideo CommunicationServer using CiscoTelePresence ContentServer
Recordingvideo callbetweenSX20Quick Setregisteredwith UnifiedCM & SX80Codecregisteredwith CiscoVCS usingContentServer
UCJ11.5PH2S.TCS.G.008
PassedEX90-> UnifiedCM->SIP Trunk->CiscoVCS->SX80 CodecEX90->UnifiedCM->SIPTrunk->Content Server
To verify that user isable to Record videocall between CiscoTelePresence SystemEX90 registered withCisco UnifiedCommunicationsManager & CiscoTelePresence SX80Codec Registered withCisco TelePresenceVideo CommunicationServer using CiscoTelePresence ContentServer
Recordingvideo callbetweenEX90registeredwith UnifiedCM & SX80Codecregisteredwith CiscoVCS usingContentServer
UCJ11.5PH2S.TCS.G.009
PassedEX90-> UnifiedCM->EX60 EX90->Add->UnifiedCM->Integrator PackageC90 Integrator PackageC90->Unified CM-> SIPTrunk->Content Server
To verify that user isable to Recording videoconference callbetween CiscoTelePresence SystemEX90 ,CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoUnifiedCommunicationsManager using CiscoTelePresence ContentServer
Recordingvideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith UnifiedCM usingContentServer
UCJ11.5PH2S.TCS.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 171
Test Results SummaryCisco TelePresence Content Server
PassedEX90-> CiscoVCS->EX60 EX90->Add->CiscoVCS->IntegratorPackage C90 IntegratorPackage C90->CiscoVCS->Content Server
To verify that user isable to Recording videoconference callbetween CiscoTelePresence SystemEX90 , CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoTelePresence VideoCommunication Serverusing CiscoTelePresence ContentServer
Recordingvideoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith CiscoVCS usingContentServer
UCJ11.5PH2S.TCS.G.011
PassedMX300 G2, MX200 G2& SX80 Codec->Unified CM->SIPTrunk->MCU 5310MX300 G2->UnifiedCM-> SIPTrunk->Content Server
To verify that user isable to Record and playvideo conference callbetween CiscoTelePresence MX300G2 ,Cisco TelePresenceMX200 G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5310 using CiscoTelePresence ContentServer
Record andplay videoconferencecall betweenMX300 G2,MX200G2&SX80 Codecregisteredwith UnifiedCM via MCU5310 usingContentServer
UCJ11.5PH2S.TCS.G.012
PassedSX10Quick Set,MX200G2 & SX80 Codec->Unified CM->SIPTrunk-> MCU 5320MX200 G2->UnifiedCM-> SIPTrunk->Content Server
To verify that user isable to Record and playvideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence MX200G2 & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer
Record andplay videoconferencecall betweenSX10 QuickSet,MX200G2 & SX80Codecregisteredwith UnifiedCM via MCU5320 usingContentServer
UCJ11.5PH2S.TCS.G.013
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan172
Test Results SummaryCisco TelePresence Content Server
PassedSX10 Quick Set, SX20Quick Set & SX80Codec-> UnifiedCM->SIPTrunk->TelePresenceConductor->Cisco TS7010 SX20 QuickSet->Unified CM-> SIPTrunk->Content Server
To verify that user isable to Record and playvideo conferencebetween CiscoTelePresence SX10Quick Set ,CiscoTelePresence SX20Quick Set & CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager via CiscoTelePresence Server7010 with CiscoTelePresenceConductor using CiscoTelePresence ContentServer
Record andplay videoconferencecall betweenSX10 QuickSet,SX20Quick Set &SX80 Codecregisteredwith UnifiedCM via CiscoTS 7010 withTelePresenceConductorusing ContentServer
UCJ11.5PH2S.TCS.G.014
PassedEX90-> UnifiedCM->EX60 EX90->Add->UnifiedCM->Integrator PackageC90 EX90->UnifiedCM-> SIPTrunk->Content Server
To verify that user isable to Record and playvideo conference callbetween CiscoTelePresence SystemEX90 , CiscoTelePresence SystemEX60 & CiscoTelePresence SystemIntegrator Package C90registered with CiscoUnifiedCommunicationsManager using CiscoTelePresence ContentServer
Record andplay videoconferencecall betweenEX90 ,EX60& IntegratorPackage C90registeredwith UnifiedCM usingContentServer
UCJ11.5PH2S.TCS.G.015
PassedSX10 Quick Set (SIP)->Cisco VCS-> TCS (SIP)
Verify whetherInterworking video callbetween SX10 QuickSet registered withCisco VCS as a SIPendpoint , TCS isregistered with CiscoVCS by SIP establishedsuccessfully
Video callbetweenSX10Quick Setregisteredwith CiscoVCS by SIPendpoint ,TCS isregisteredwith CiscoVCS by SIP
UCJ11.5PH2S.TCS.SR.003
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 173
Test Results SummaryCisco TelePresence Content Server
PassedEX90 (SIP)-> CiscoVCS-> TCS (SIP)
Verify whether videocall between EX90registered with CiscoVCS as a SIP endpoint, TCS is registered withCisco VCS by H.323established successfully
Video callbetweenEX90registeredwith CiscoVCS as a SIPendpoint ,TCS isregisteredwith CiscoVCS by SIP
UCJ11.5PH2S.TCS.SR.004
PassedSX10 Quick Set, SX20Quick Set,MX200-G2->Unified CM->SIPTrunk->Cisco MCU5310-> TCS
To verify that user isable to streaming livevideo conferencebetween SX10 QuickSet, SX20 Quick Set &MX200-G2 with CiscoMCU5310 using CiscoTelePresence ContentServer
Streaming livevideoconferencebetweenSX10Quick Set,SX20 QuickSet &MX200-G2with CiscoMCU 5310using CiscoTelePresenceContentServer
UCJ11.5PH2S.TCS.SR.005
PassedSX80 Codec,MX300-G2,MX200-G2->Unified CM->SIPTrunk->Cisco TS 7010->TCS
To verify that user isable to streaming livevideo conferencebetween SX80 Codec,MX300-G2 &MX200-G2 with CiscoTelePresence Server7010 using CiscoTelePresence ContentServer
Streaming livevideoconferencebetweenSX80Codec ,MX300-G2 &MX200-G2with CiscoTelePresenceServer 7010using CiscoTelePresenceContentServer
UCJ11.5PH2S.TCS.SR.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan174
Test Results SummaryCisco TelePresence Content Server
PassedSX80 Codec,MX300-G2,MX200-G2->Unified CM->SIPTrunk->Cisco MCU5320-> TCS
To verify that user isable to streaming livevideo conferencebetween SX80 Codec,MX300-G2 &MX200-G2 with CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer
Streaming livevideoconferencebetweenSX80Codec ,MX300-G2 &MX200-G2with CiscoMCU 5320using CiscoTelePresenceContentServer
UCJ11.5PH2S.TCS.SR.007
PassedSX10 Quick Set, SX80Codec & MX200-G2->Unified CM->SIPTrunk->Cisco MCU5320-> TCS
To verify that user isable to streaming livevideo conferencebetween SX10 QuickSet , SX80 Codec &MX200-G2 with CiscoTelePresence MCU5320 using CiscoTelePresence ContentServer
Streaming liveHD videoconferencebetweenSX10Quick Set ,SX80 Codec&MX200-G2with CiscoMCU 5320using CiscoTelePresenceContentServer
UCJ11.5PH2S.TCS.SR.008
PassedSX10 Quick Set, SX80Codec & MX200-G2->Unified CM->SIPTrunk->Cisco TS 7010->TCS
To verify that user isable to streaming livevideo conferencebetween SX10 QuickSet , SX80 Codec &MX200-G2 with CiscoTelePresence Server7010 using CiscoTelePresence ContentServer
Streaming liveHD videoconferencebetweenSX10Quick Set ,SX80 Codec&MX200-G2with Cisco TS7010 usingCiscoTelePresenceContentServer
UCJ11.5PH2S.TCS.SR.009
Cisco Prime Collaboration
Cisco Prime Collaboration AnalyticsDefectsStatusDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 175
Test Results SummaryCisco Prime Collaboration
PassedGo to Analytics->CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourTrunk Capacity dashlet inCisco Prime CollaborationAssurance Enterprise mode
Check the CallVolume in Busy-HourTrunkCapacity dashletin Enterprise mode
UCJ11.5S.CPC-AN.G.001
PassedGo to Analytics->CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourTrunk Capacity dashlet inCisco Prime CollaborationAssurance MSP mode
Check the CallVolume in Busy-HourTrunkCapacity dashletin MSP mode
UCJ11.5S.CPC-AN.G.002
PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourRoute Group Capacitydashlet in Cisco PrimeCollaboration AssuranceEnterprise mode
Check the CallVolume in Busy-HourRoute Group Capacitydashlet in EnterpriseMode
UCJ11.5S.CPC-AN.G.003
PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume detailsavailable in Busy-HourRoute Group Capacitydashlet in Cisco PrimeCollaboration AssuranceMSP mode
Check the CallVolume in Busy-HourRoute Group Capacitydashlet in MSP Mode
UCJ11.5S.CPC-AN.G.004
PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume details inBusy-Hour Route GroupCapacity dashlet afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 build inEnterprise mode
Check the CallVolume in Busy-HourRoute Trunk Capacitydashlet after upgradingfrom CPC Assurance11.0 to 11.5 build inEnterprise mode
UCJ11.5S.CPC-AN.G.005
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan176
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics-> CapacityAnalysis and verify whetherthe user is able to view theCall Volume details inBusy-Hour Route GroupCapacity dashlet afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 build inMSP mode
Check the CallVolume in Busy-HourRoute Group Capacitydashlet after upgradingfrom CPC Assurance11.0 to 11.5 build inMSP mode
UCJ11.5S.CPC-AN.G.006
PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Technology AdoptionDashboard metrics in CiscoPrime CollaborationAssurance MSP mode
Validate whetherSystem Administratoruser can access theTechnology Adoptionmetrics Dashboard inMSP mode
UCJ11.5S.CPC-AN.G.007
PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Traffic AnalysisDashboard metrics in CiscoPrime CollaborationAssurance MSP mode
Validate whetherSystem Administratoruser can access theTraffic AnalysisDashboard in MSPmode
UCJ11.5S.CPC-AN.G.008
PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe UC System PerformanceDashboard metrics in CiscoPrime CollaborationAssurance MSP mode
Validate whetherSystem Administratoruser can access the UCSystem PerformanceDashboard in MSPmode
UCJ11.5S.CPC-AN.G.009
PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Asset Usage Dashboardmetrics in Cisco PrimeCollaboration AssuranceEnterprise mode
Validate whetherSystem Administratoruser can access theAsset UsageDashboard inEnterprise mode
UCJ11.5S.CPC-AN.G.010
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 177
Test Results SummaryCisco Prime Collaboration Analytics
PassedLogin as SystemAdministrator user -> Go toAnalytics and verifywhether the user can accessthe Capacity AnalysisDashboard metrics in CiscoPrime CollaborationAssurance Enterprise mode
Validate whetherSystem Administratoruser can access theCapacity AnalysisDashboard inEnterprise mode.
UCJ11.5S.CPC-AN.G.011
PassedLogin as SystemAdministrator user- > Go toAnalytics and verifywhether the user can accessVideo conference dashboardmetrics in Cisco PrimeCollaboration AssuranceMSP mode
Validate whetherSystem Administratoruser can access theVideo conferencedashboard inEnterprise mode.
UCJ11.5S.CPC-AN.G.012
PassedGo to Analytics->TechnologyAdoption andverify whether ReportHeader (Export/Print ) isavailable in TechnologyUsage dashlet in CiscoPrime CollaborationAssurance Enterprise mode
Check for ReportHeader (Export/Print )in Technology Usagedashlet in Enterprisemode
UCJ11.5S.CPC-AN.G.013
PassedGo to Analytics ->AssertUsage and verify whetherReport Header (Export/Print) is available in Least UsedEndpoint Types dashlet inCisco Prime CollaborationAssurance Enterprise mode
Check for ReportHeader (Export/Print )in Least UsedEndpoint Typesdashlet in Enterprisemode
UCJ11.5S.CPC-AN.G.014
PassedGo to Analytics-> UCSystem Performance andverify whether ReportHeader is available in CPUUtilization dashlet in CiscoPrime CollaborationAssurance Enterprise mode
Check for ReportHeader (Export/Print )in CPU Utilizationdashlet in Enterprisemode
UCJ11.5S.CPC-AN.G.015
PassedGo to Analytics ->UCSystem Performance andverify whether ReportHeader is available inMemory Utilization dashletin Cisco PrimeCollaboration AssuranceEnterprise mode
Check for ReportHeader (Export/Print )in Memory Utilizationdashlet in Enterprisemode
UCJ11.5S.CPC-AN.G.016
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan178
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics -> ServiceExperience dashboard andverify whether Filtersdropdown are working inService ExperienceDistribution dashlet afterupgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 Enterprisemodein IE 11
Check for the Filtersdropdown for ServiceExperienceDistribution dashletafter upgrading from11.0 to 11.5 Enterprisemode in IE 11
UCJ11.5S.CPC-AN.G.017
PassedGo to Analytics -> ServiceExperience dashboard andverify whether Filtersdropdown are working inService ExperienceDistribution dashlet afterupgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 Enterprisemodein chrome46
Check for the Filtersdropdown for ServiceExperienceDistribution dashletafter upgrading from11.0 to 11.5 Enterprisemode in Chrome 46
UCJ11.5S.CPC-AN.G.018
PassedGo to Analytics -> ServiceExperience dashboard andverify whether Filtersdropdown are working inService ExperienceDistribution dashlet afterupgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 Enterprisemodein FF 38
Check for the Filtersdropdown for ServiceExperienceDistribution dashletafter upgrading from11.0 to 11.5 Enterprisemode inMozilla FF 38
UCJ11.5S.CPC-AN.G.019
PassedGo to Analytics->MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available under ServiceExperience dashboard afterupgrading from 11.0 to 11.5Cisco Prime CollaborationAssurance Enterprise modein IE 11
Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterupgrading from 11.0to 11.5 Enterprisemode in IE 11
UCJ11.5S.CPC-AN.G.020
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 179
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics->MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available under ServiceExperience dashboard afterupgrading from 11.0 to 11.5Cisco Prime CollaborationAssurance Enterprise modein FF38
Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterupgrading from 11.0to 11.5 Enterprisemode in FF 38
UCJ11.5S.CPC-AN.G.021
PassedGo to Analytics->MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available under ServiceExperience dashboard afterupgrading from 11.0 to 11.5in Cisco PrimeCollaboration AssuranceEnterprise mode inChrome42
Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterupgrading from 11.0to 11.5 Enterprisemode in Chrome 42
UCJ11.5S.CPC-AN.G.022
PassedGo to Analytics-> MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available in ServiceExperience dashboard afterenabling Favorite option inCisco Prime CollaborationAssurance MSP mode
Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterenabling Favoriteoption in MSP mode
UCJ11.5S.CPC-AN.G.023
PassedGo to Analytics-> MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available in ServiceExperience dashboard afterenabling Favorite option inCisco Prime CollaborationAssurance Enterprise mode
Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterenabling Favoriteoption in Enterprisemode
UCJ11.5S.CPC-AN.G.024
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan180
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics-> MyDashboard and verifywhether the added Callgrade for Location and Callstatus for Location dashletis available in ServiceExperience dashboard afterenabling Favorite option inCisco Prime CollaborationAssurance MSP mode inIE11
Add and Validate Callgrade for Location andCall status forLocation dashlet inService Experiencedashboard afterenabling Favoriteoption in MSP modeusing IE11
UCJ11.5S.CPC-AN.G.025
PassedGo to Analytics->ServiceExperience Dashboard andverify whether user is ableto check the Filter option"From and To" underService ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance Enterprise mode
Check the Filter option"From and To" inService ExperienceDashboard inEnterprise mode
UCJ11.5S.CPC-AN.G.026
PassedGo to Analytics->MyDashboard and Verifywhether user is able to checkthe Filter option "From andTo" in Service ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance Enterprise mode
Check the Filter option"From and To" innewly added ServiceExperienceDistribution dashlet inEnterprise mode
UCJ11.5S.CPC-AN.G.027
PassedGo to Analytics->ServiceExperience Dashboard andverify whether user is ableto check the Filter option"From and To" underservice ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance MSP mode
Check the Filter option"From and To" inService ExperienceDashboard in MSPmode
UCJ11.5S.CPC-AN.G.028
PassedGo to Analytics->MyDashboard and Verifywhether user is able to checkthe Filter option "From andTo" in Service ExperienceDistribution dashlet in CiscoPrime CollaborationAssurance MSP mode
Check the Filter option"From and To" innewly added ServiceExperienceDistribution dashlet inMSP mode
UCJ11.5S.CPC-AN.G.029
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 181
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics->ServiceExperience Dashboard andverify whether user is ableto check the Filter option"From and To" afterupgrading from 11.0 to 11.5Cisco Prime CollaborationAssurance Enterprise mode
Check the Filter option"From and To" inService ExperienceDistribution dashletafter upgrading from11.0 to 11.5 inEnterprise mode
UCJ11.5S.CPC-AN.G.030
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence Server7010 Version 4.3 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Add and integrate theTPS 7010 Version 4.3in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.001
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresenceConductor 4.x in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Add and integrate theCisco TelePresenceConductor 4.x inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.002
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresenceManagement Suite 15.2 inCisco Prime CollaborationAssurance Enterprise modesuccessfully
Add and integrate theCisco TelePresenceManagement Suite15.2 in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.003
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence VideoCommunication ServerX8.8in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theCisco TelePresenceVideo CommunicationServer X8.8 inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan182
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco Unity Connection10.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theCisco UnityConnection 10.5 inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.005
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications Manager11.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theCisco UnifiedCommunicationsManager 11.5 inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.006
PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage CiscoTelePresence SX10 QuickSet endpoint which is havingCE8.1 build in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Manage SX10 QuickSet endpoint havingCE8.1 build inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.007
PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage CiscoUnified IP Phone 8945 inCisco Prime CollaborationAssurance Enterprise modesuccessfully
Manage IP Phone8945 in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.008
PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage CiscoUnified IP Phone 9951 inCisco Prime CollaborationAssurance Enterprise modesuccessfully
Manage IP Phone9951 in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.009
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 183
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theSynergy phone DX650 inCisco Prime CollaborationAssurance Enterprise modesuccessfully
Add and integrate theSynergy phoneDX650in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.010
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications ManagerExpress in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theCisco UnifiedCommunicationsManager Express inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.011
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theSurvivable Remote SiteTelephony in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theSurvivable RemoteSite Telephony inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.012
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theAggregation ServicesRouters in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theAggregation ServicesRouters in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.013
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theIntegrated Services Routersin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Add and integrate theIntegrated ServicesRouters in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.014
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan184
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications ManagerIM&Presence 11.5 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Add and integrate theCisco UnifiedCommunicationsManager IM &Presence 11.5 inInventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.015
PassedGo to Inventory ->Inventory Management andverify whether the user isable to manage Cisco Jabberfor Android in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Manage Jabber forAndroid in InventoryManagementDashboard
UCJ11.5PH2S.CPC-AN.G.016
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last28 Days of data for Audiooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Filter Last 28 Days ofdata for Audio optionin Location CACBandwidth UtilizationDashlet
UCJ11.5PH2S.CPC-AN.G.017
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last7 Days of data for Audiooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Filter Last 7 Days ofdata for Audio optionin Location CACBandwidth Utilizationin Detailed AnalysisDashlet
UCJ11.5PH2S.CPC-AN.G.018
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last7 Days of data for Videooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Filter Last 7 Days ofdata for Video optionin Location CACBandwidth UtilizationDashlet
UCJ11.5PH2S.CPC-AN.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 185
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last13 Months of data forImmersive option underLocation CAC BandwidthUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Filter Last 13 Monthsof data for Immersiveoption in LocationCAC BandwidthUtilization in DetailedAnalysis Dashlet
UCJ11.5PH2S.CPC-AN.G.020
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last7 Days of data forImmersive option underLocation CAC BandwidthUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Filter Last 7 Days ofdata for Immersiveoption in LocationCAC BandwidthUtilization Dashlet
UCJ11.5PH2S.CPC-AN.G.021
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to Filter Last2 Weeks of data for Videooption under Location CACBandwidth UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Filter Last 2 Weeks ofdata for Video optionin Location CACBandwidth Utilizationin Detailed AnalysisDashlet
UCJ11.5PH2S.CPC-AN.G.022
PassedGo to Analytics ->Technology Adoption andverify whether the user isable to view the CiscoTelePresence SX10 QuickSet Endpoint details in Gridmode in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
View the SX10 QuickSet Endpoint details inGrid mode underEndpointsDeploymentSummary Dashlet
UCJ11.5PH2S.CPC-AN.G.023
PassedGo to Analytics -> MyDashboard and verifywhether the user is able toadd Conductor Bridge PoolUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
AddConductor BridgePool UtilizationDashlet in MyDashboard
UCJ11.5PH2S.CPC-AN.G.024
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan186
Test Results SummaryCisco Prime Collaboration Analytics
PassedLogin as Operator user andverify whether the Operatoruser is able to view theAnalytics tab in main menuin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Analytics menu link isavailable for Operatoruser in Enterprisemode
UCJ11.5PH2S.CPC-AN.G.025
PassedLogin as Operator user andverify whether the Operatoruser is unable to view theAnalytics tab in main menuin Cisco PrimeCollaboration AssuranceMSP mode successfully
Analytics menu link isunavailable forOperator user in MSPmode
UCJ11.5PH2S.CPC-AN.G.026
PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the UC SystemPerformance Dashboard inCisco Prime CollaborationAssurance MSP modesuccessfully
Validate SystemAdministrator user canaccess the UC SystemPerformanceDashboard in MSPmode
UCJ11.5PH2S.CPC-AN.G.027
PassedGo to Analytics -> ServiceExperience Dashboard andverify whether the user isable to Filter Audio only forCall quality AnalysisDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Filter Audio only forCall Quality AnalysisDashlet
UCJ11.5PH2S.CPC-AN.G.028
PassedGo to Analytics -> VideoConference Analysis andverify whether the user isable to filter the data forLast 28 days in ConductorBridge Pool UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Filter the data for Last28 days in ConductorBridge Pool UtilizationDashlet
UCJ11.5PH2S.CPC-AN.G.029
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 187
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics ->Technology Adoption andverify whether the user isable to view EndpointsDevelopment Summary inColumn Chart in DetailedAnalysis Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
EndpointsDevelopmentSummary in ColumnChart in DetailedAnalysis Dashlet
UCJ11.5PH2S.CPC-AN.G.030
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to schedulethe report for TrunkUtilization Dashlet in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Schedule the report forTrunk UtilizationDashlet
UCJ11.5PH2S.CPC-AN.G.031
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to viewTrunk Utilization Dashlet asGrid mode in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
View TrunkUtilization Dashlet inGrid mode
UCJ11.5PH2S.CPC-AN.G.032
PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the TechnologyAdoption Dashboard inCisco Prime CollaborationAssurance MSP modesuccessfully
Validate SystemAdministrator canaccess the TechnologyAdoption Dashboardin MSP mode
UCJ11.5PH2S.CPC-AN.G.033
PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the Asset UsageDashboard in Cisco PrimeCollaboration AssuranceMSP mode successfully
Validate SystemAdministrator canaccess the Asset UsageDashboard in MSPmode
UCJ11.5PH2S.CPC-AN.G.034
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan188
Test Results SummaryCisco Prime Collaboration Analytics
PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the CapacityAnalysisDashboard in Cisco PrimeCollaboration AssuranceMSP mode successfully
Validate SystemAdministrator canaccess the CapacityAnalysis Dashboard inMSP mode
UCJ11.5PH2S.CPC-AN.G.035
PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the ServiceExperience Dashboard inCisco Prime CollaborationAssurance MSP modesuccessfully
Validate SystemAdministrator canaccess the ServiceExperienceDashboardin MSP mode
UCJ11.5PH2S.CPC-AN.G.036
PassedLogin as SystemAdministrator user andverify whether the SystemAdministrator user canaccess the UC SystemPerformance Dashboard inCisco Prime CollaborationMSP Enterprise modesuccessfully
Validate SystemAdministrator canaccess the UC SystemPerformanceDashboard in MSPmode
UCJ11.5PH2S.CPC-AN.G.037
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to View theDetached Trunk UtilizationDashlet in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
View the DetachedTrunk UtilizationDashlet
UCJ11.5PH2S.CPC-AN.G.038
PassedGo to Analytics -> CapacityAnalysis and verify whetherthe user is able to exportTrunk Utilization Dashletdata to CSV format in CiscoPrime CollaborationAssurance Enterprise modesuccessfully
Export TrunkUtilization Dashletdata to CSV format
UCJ11.5PH2S.CPC-AN.G.039
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 189
Test Results SummaryCisco Prime Collaboration Analytics
PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able to upgradefrom 10.5 to 11.5 inEnterprise mode in BE7000Medium successfully
Upgrade Cisco PrimeCollaborationAssurance from 10.5to 11.5 in Enterprisemode in BE7000Medium
UCJ11.5PH2S.CPC-AN.G.040
PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 10.5.1 to 11.5 in MSPMode
Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 10.5.1to 11.5 in MSP Mode
UCJ11.5PH2S.CPC-AN.G.041
PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 in MSPMode
Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 11.0to 11.5 in MSP Mode
UCJ11.5PH2S.CPC-AN.G.042
PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 10.5.1 to 11.5 inEnterprise Mode
Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 10.5.1to 11.5 in EnterpriseMode
UCJ11.5PH2S.CPC-AN.G.043
PassedVerify that user is able toview the successful messageindication at the root levelafter upgrade Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise Mode
Message indication atthe root level afterupgrade Cisco PrimeCollaborationAssurance from 11.0to 11.5 in EnterpriseMode
UCJ11.5PH2S.CPC-AN.G.044
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to see the correctnumber of 8800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in ChartMode inCisco Prime CollaborationAssurance successfully
8800 series endpointsConfigured Metricstatus in Chart Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard
UCJ11.5PH2S.CPC-AN.G.045
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan190
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the correctnumber of 7800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in ChartMode inCisco Prime CollaborationAssurance successfully
7800 series endpointsConfigured Metricstatus in Chart Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard
UCJ11.5PH2S.CPC-AN.G.046
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the correctnumber of 8800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in Grid Mode inCisco Prime CollaborationAssurance successfully
8800 series endpointsConfigured Metricstatus in Grid Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard
UCJ11.5PH2S.CPC-AN.G.047
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the correctnumber of 7800 seriesendpoints deployed for thelast 7 Days in the EndpointDeployment SummaryDashboard in Grid Mode inCisco Prime CollaborationAssurance successfully
7800 series endpointsConfigured Metricstatus in Grid Modefor "7 Days ago" usingEndpoint DeploymentSummary Dashboard
UCJ11.5PH2S.CPC-AN.G.048
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactattempted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Attempted CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint ModelDashboard
UCJ11.5PH2S.CPC-AN.G.049
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 191
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactCompleted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Completed CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint ModelDashboard
UCJ11.5PH2S.CPC-AN.G.050
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactDropped Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Dropped Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointModel Dashboard
UCJ11.5PH2S.CPC-AN.G.051
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exact FailedCall Volume detailshappened for the last 2Weeks in the Call Volumeby Endpoint ModelDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Failed Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointModel Dashboard
UCJ11.5PH2S.CPC-AN.G.052
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactattempted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Attempted CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint TypesDashboard
UCJ11.5PH2S.CPC-AN.G.053
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan192
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactCompleted Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Completed CallVolume Metric statusfor "Last 2 Weeks"using Call Volume byEndpoint TypesDashboard
UCJ11.5PH2S.CPC-AN.G.054
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exactDropped Call Volumedetails happened for the last2 Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Dropped Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointTypes Dashboard
UCJ11.5PH2S.CPC-AN.G.055
PassedGo to the Analytics->TechnologyAdoption andverify whether the user isable to view the exact FailedCall Volume detailshappened for the last 2Weeks in the Call Volumeby Endpoint TypesDashboard in Cisco PrimeCollaboration Assurancesuccessfully
Failed Call VolumeMetric status for "Last2 Weeks" using CallVolume by EndpointTypes Dashboard
UCJ11.5PH2S.CPC-AN.G.056
PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 2Weeks in Cisco PrimeCollaboration Assurancesuccessfully
Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last 2Weeks"
UCJ11.5PH2S.CPC-AN.G.057
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 193
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 4Weeks in Cisco PrimeCollaboration Assurancesuccessfully
Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last 4Weeks"
UCJ11.5PH2S.CPC-AN.G.058
PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 7Days in Cisco PrimeCollaboration Assurancesuccessfully
Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last 7Days"
UCJ11.5PH2S.CPC-AN.G.059
PassedGo to the Analytics ->VideoConference Analysis andverify whether the user isable to view the usage trendsof the Conference Resourcesfor the specified Clusterwith the duration as last 14Days in Cisco PrimeCollaboration Assurancesuccessfully
Video ConferenceAnalysis for thespecified Cluster withthe duration as "Last14 Days"
UCJ11.5PH2S.CPC-AN.G.060
PassedGo to the Analytics ->Assetusage and verify whether theuser is able to view theEndpoint DeploymentSummary Dashboard underAsset Usage tab in CiscoPrime CollaborationAnalytics Business Editionsuccessfully
Endpoint DeploymentSummary Dashboardmove status fromTechnology Adaptionto Asset Usage tab inCisco PrimeCollaborationAnalytics BusinessEdition
UCJ11.5PH2S.CPC-AN.G.061
PassedGo to the Analytics ->Assetusage and verify whether theuser is able to view the CallVolume by Endpoint TypesDashboard under AssetUsage tab in Cisco PrimeCollaboration AnalyticsBusiness Editionsuccessfully
Call Volume byEndpoint TypesDashboardmove statusfrom TechnologyAdaption to AssetUsage tab in CiscoPrime CollaborationAnalytics BusinessEdition
UCJ11.5PH2S.CPC-AN.G.062
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan194
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to the Analytics ->Assetusage and verify whether theuser is able to view the CallVolume by Endpoint ModelDashboard under AssetUsage tab in Cisco PrimeCollaboration AnalyticsBusiness Editionsuccessfully
Call Volume byEndpoint ModelDashboardmove statusfrom TechnologyAdaption to AssetUsage tab in CiscoPrime CollaborationAnalytics BusinessEdition
UCJ11.5PH2S.CPC-AN.G.063
PassedGo to the Analytics->Service Experience andverify whether the user isable to view the Call Gradefor Location metricdetails(Good, Acceptableand Poor) for the last 7 Daysin Cisco PrimeCollaboration Assurancesuccessfully
"Call Grade forLocations" metricsstatus for good,acceptable and poorcalls based on thelocation with the timeperiod as Last 7 Days
UCJ11.5PH2S.CPC-AN.G.064
PassedGo to the Analytics->Service Experience andverify whether the user isable to view the Call Gradefor Location metricdetails(Good, Acceptableand Poor) for the last 2Weeks in Cisco PrimeCollaboration Assurancesuccessfully
"Call Grade forLocations" metricsstatus for good,acceptable and poorcalls based on thelocation with the timeperiod as Last 2Weeks
UCJ11.5PH2S.CPC-AN.G.065
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco IX5000 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Add and integrate theCisco IX5000 inInventoryManagementDashboard in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.066
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence ServerVersion 4.3 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully in BE7000-Medium
Add and integrate theCisco TelePresenceServer Version 4.3 inInventoryManagementDashboard in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.067
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 195
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresenceConductor version XC4.2 inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Add and integrate theCisco TelePresenceConductor versionXC4.2 in InventoryManagementDashboard in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.068
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco UnifiedCommunications ManagerIM&Presence 11.0 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Add and integrate theCisco UnifiedCommunicationsManager IM &Presence 11.0 inInventoryManagementDashboard in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.069
PassedGo to Inventory ->Inventory Management andverify whether the user isable to add and integrate theCisco TelePresence VideoCommunication ServerExpressway X8.8 in CiscoPrime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Add and integrate theCisco TelePresenceVideo CommunicationServer ExpresswayX8.8 in InventoryManagementDashboard in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.070
PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 12Months of Time period forCPU Utilization in UCSystemPerformanceDashletin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully in BE7000-Medium
Filter Last 12 Monthsof Time period forCPUUtilization in UCSystem PerformanceDashlet in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.071
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan196
Test Results SummaryCisco Prime Collaboration Analytics
PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 52 Weeksof Time period for CPUUtilization in UC SystemPerformance Dashlet inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Filter Last 52 Weeksof Time period forCPUUtilization in UCSystem PerformanceDashlet in BE7000-Medium
UCJ11.5PH2S.CPC-AN.G.072
PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 14 Daysof Time period for MemoryUtilization in UC SystemPerformance Dashlet inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Filter Last 14 Days ofTime period forMemory Utilization inUC SystemPerformance Dashletin BE 7000-Medium
UCJ11.5PH2S.CPC-AN.G.073
PassedGo to Analytics -> UCSystem Performance andverify whether the user isable to Filter Last 4 Weeksof Time period for MemoryUtilization in UC SystemPerformance Dashlet inCisco Prime CollaborationAssurance Enterprise modesuccessfully in BE7000-Medium
Filter Last 4 Weeks ofTime period forMemory Utilization inUC SystemPerformance Dashletin BE 7000-Medium
UCJ11.5PH2S.CPC-AN.G.074
Cisco Prime Collaboration AssuranceDefectsStatusDescriptionTitleLogical ID
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 197
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to SystemAdministration-> BackupSettings and verifywhether the user is ableto check the number ofbackup device kept insFTP when backupCategory is selected asAssurance and Analyticsin Cisco PrimeCollaboration AssuranceEnterprise mode
Check the number ofbackup device kept insFTP when backupCategory as Assuranceand Analytics InEnterprise mode
UCJ11.5S.CPC-AS.G.001
PassedGo to SystemAdministration-> BackupSettings and verifywhether the user is ableto check the number ofbackup device kept insFTP when backupCategory is selected asAssurance and Analyticsin Cisco PrimeCollaboration AssuranceMSP mode
Check the number ofbackup device kept insFTP when backupCategory as Assuranceand Analytics In MSPmode
UCJ11.5S.CPC-AS.G.002
PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifywhether user is able toinstall BE OVA StandardEdition in virtualappliance successfully
Check for StandardEdition and install ofBE OVA in virtualappliance
UCJ11.5S.CPC-AS.G.003
PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifywhether user is able toinstall BE OVAEnterprise Edition invirtual appliancesuccessfully
Check for EnterpriseEdition and install ofBE OVA in virtualappliance
UCJ11.5S.CPC-AS.G.004
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan198
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to AssuranceAdministration ->EventCustomization and verifywhether Add option for"Notes for Email" isavailable under System inCisco PrimeCollaboration AssuranceMSP mode
Check for Add optionin Event customizationin MSP mode
UCJ11.5S.CPC-AS.G.005
PassedGo to AssuranceAdministration ->EventCustomization and verifywhether Add option for"Notes for Email" isavailable under System inCisco PrimeCollaboration AssuranceEnterprise mode
Check for Add optionin Event customizationin Enterprise mode
UCJ11.5S.CPC-AS.G.006
PassedGo to AssuranceAdministration -> EventCustomization and verifywhether user is able toEdit/Delete the "Notes forEmail" under System inCisco PrimeCollaboration AssuranceEnterprise mode
Check user is able toEdit/Delete the "Notesfor Email" inEnterprise Mode
UCJ11.5S.CPC-AS.G.007
PassedGo to AssuranceAdministration -> EventCustomization and verifywhether user is able toEdit/Delete the "Notes forEmail" under System inCisco PrimeCollaboration AssuranceMSP mode
Check user is able toEdit/Delete the "Notesfor Email" in MSPMode
UCJ11.5S.CPC-AS.G.008
PassedGo to AssuranceAdministration -> EventCustomization and verifywhether user is able toEdit /Delete the "Notesfor Email" under Systemafter upgrading fromCisco PrimeCollaboration Assurance11.0 to 11.5 in Enterprisemode
Check user is able toEdit/Delete the "Notesfor Email" afterupgrading from 11.0 to11.5 in EnterpriseMode
UCJ11.5S.CPC-AS.G.009
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 199
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Device Inventory-> InventoryManagementand verify that CiscoUnified CommunicationsManager 8.6.1 applicationis available under currentinventory in Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateUnified CM 8.6.1 withCisco PrimeCollaborationAssurance
UCJ11.5S.CPC-AS.G.010
PassedGo to Device Inventory->InventoryManagementand verify that CiscoUnified CommunicationsManager 11.5 applicationis available under currentinventory in Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateUnified CM 11.5 withCisco PrimeCollaborationAssurance inEnterprise mode
UCJ11.5S.CPC-AS.G.011
PassedGo to Device Inventory->InventoryManagementand verify that CiscoUnity Connection 11.5application is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateCUC 11.5 with CiscoPrime CollaborationAssurance inEnterprise mode
UCJ11.5S.CPC-AS.G.012
PassedGo to Device Inventory-> InventoryManagementand verify that CiscoTelePresence Server 11.5application is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateCisco TelePresenceServer 11.5 with CiscoPrime CollaborationAssurance inEnterprise mode
UCJ11.5S.CPC-AS.G.013
PassedGo to Device Inventory-> InventoryManagementand verify thatTelePresenceManagement Systemapplication is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateTelePresenceManagement Systemwith Cisco PrimeCollaborationAssurance inEnterprise mode
UCJ11.5S.CPC-AS.G.014
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan200
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Device Inventory->InventoryManagementand verify thatTelePresence Conductorapplication is availableunder current inventoryin Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateTelePresenceConductor with CiscoPrime CollaborationAssurance inEnterprise mode
UCJ11.5S.CPC-AS.G.015
PassedGo to Device Inventory-> InventoryManagementand verify that CiscoExpressway 6.0 isavailable under currentinventory in Cisco PrimeCollaboration AssuranceEnterprise mode
Add and IntegrateCisco Expressway 6.0with Cisco PrimeCollaborationAssurance inEnterprise mode
UCJ11.5S.CPC-AS.G.016
PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifythat user is able toupgrade from 10.6 to 11.5successfully
Upgrade Cisco PrimeCollaborationAssurance from 10.6 to11.5
UCJ11.5S.CPC-AS.G.017
PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifythat user is able toupgrade from 10.5 to 11.5successfully
Upgrade Cisco PrimeCollaborationAssurance from 10.5 to11.5
UCJ11.5S.CPC-AS.G.018
PassedGo to Cisco PrimeCollaboration AssuranceServer as Admin, throughvSphere client and verifythat user is able toupgrade from 11.0 to 11.5successfully
Upgrade Cisco PrimeCollaborationAssurance from 11.0 to11.5
UCJ11.5S.CPC-AS.G.019
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 201
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverwhen selecting time rangeas Past 30 Minutes inCisco PrimeCollaboration AssuranceEnterprise mode
Check Collect Logs forVCS selecting timerange as Past 30Minutes - Enterprisemode
UCJ11.5S.CPC-AS.G.020
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverafter upgrading CiscoPrime CollaborationAssurance from 11.0 to11.5 in MSP mode
Check Collect Logs forVCS after upgradingfrom 11.0 to 11.5 inMSP mode
UCJ11.5S.CPC-AS.G.021
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverafter upgrading CiscoPrime CollaborationAssurance from 11.0 to11.5 in Enterprise mode
Check Collect Logs forVCS after upgradingfrom 11.0 to 11.5 inEnterprise mode
UCJ11.5S.CPC-AS.G.022
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise mode
Check Collect Logs forExpressway afterupgrading from 11.0 to11.5 in MSP mode
UCJ11.5S.CPC-AS.G.023
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan202
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverwhen selecting time rangeas Past 1 hour in CiscoPrime CollaborationAssurance Enterprisemode
Check Collect Logs forVCS when selectingtime range as Past 1hour Enterprise mode
UCJ11.5S.CPC-AS.G.024
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to get Warningmessage while collectinglog for CiscoTelePresence VideoCommunication Serverwhen selecting time rangeas Past 3000 Hours inCisco PrimeCollaboration AssuranceEnterprise mode
Check for Warningmessage whilecollecting log for VCSwhen selecting timerange as Past 3000Hours in Enterprisemode
UCJ11.5S.CPC-AS.G.025
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway whenSelecting Time Zone asUTC (GMT) in CiscoPrime CollaborationAssurance Enterprisemode
Check Collect Logs forExpressway whenSelecting Time Zoneas UTC (GMT) inEnterprise mode
UCJ11.5S.CPC-AS.G.026
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverwhen Selecting TimeZone as UTC (GMT) inCisco PrimeCollaboration AssuranceMSP mode
Check Collect Logs forVCS when SelectingTime Zone as UTC(GMT) in MSP mode
UCJ11.5S.CPC-AS.G.027
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 203
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway whenSelecting Time Zone asUTC (GMT) and Past 30minutes in Cisco PrimeCollaboration AssuranceEnterprise mode
Check Collect Logs forExpressway whenselecting Past 30Minutes in Enterprisemode and Time zoneas UTC
UCJ11.5S.CPC-AS.G.028
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway whenSelecting Time Zone asUTC (GMT) and Past 1hour in Cisco PrimeCollaboration AssuranceEnterprise mode
Check Collect Logs forExpressway whenselecting time range asPast 1 hour inEnterprise mode andTime zone as UTC
UCJ11.5S.CPC-AS.G.029
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to get Warningmessage while collectinglog for CiscoTelePresence VideoCommunication Serverwhen selecting time rangeas Past 3000 minutes inCisco PrimeCollaboration AssuranceEnterprise mode
Check for Warningmessage whilecollecting log for VCSwhen selecting timerange as Past 3000Minutes in Enterprisemode
UCJ11.5S.CPC-AS.G.030
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco TelePresenceVideoCommunication Serverfor past 2 hours afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise mode
Check Collect Logs forVCS for Past 2 Hoursafter upgrading from11.0 to 11.5 inEnterprise mode
UCJ11.5S.CPC-AS.G.031
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan204
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Diagnose ->LogCollection Center andverify whether user isable to Collect Logs forCisco Expressway forpast 50 minutes afterupgrading Cisco PrimeCollaboration Assurancefrom 11.0 to 11.5 inEnterprise mode
Check Collect Logs forExpressway for Past 50Minutes mode afterupgrading from 11.0 to11.5 in Enterprisemode
UCJ11.5S.CPC-AS.G.032
PassedGo to Diagnose -> LogCollection Center andverify whether user isable to Collect Logs forCisco Emergencyresponder for past 5 hoursafter upgrading CiscoPrime CollaborationAssurance from 11.0 to11.5 in Enterprise mode
Check Collect Logs forCisco EmergencyResponder for Past 5Hours after upgradingfrom 11.0 to 11.5Enterprise mode
UCJ11.5S.CPC-AS.G.033
PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to get CallDetailed Record byselecting favorite optionin Cisco PrimeCollaboration AssuranceEnterprise mode in IE11
Check for CallDetailed Record ,byselecting CDR andCMR as Favoriteoption in Enterprisemode and IE 11
UCJ11.5S.CPC-AS.G.034
PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to get CallDetailed Record byselecting favorite optionin Cisco PrimeCollaboration AssuranceMSP Mozilla FF38
Check for CallDetailed Record , byselecting CDR andCMR as Favoriteoption in MSP modeand IE 11
UCJ11.5S.CPC-AS.G.035
PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to Get CallManagement Record inCisco PrimeCollaboration AssuranceEnterprise mode MozillaFF38
Check for CallManagement Record inMSP mode andMozilla FF38
UCJ11.5S.CPC-AS.G.036
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 205
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Assurance Report-> CDR & CMR Reportsand Verify whether useris able to Get CallManagement Record inCisco PrimeCollaboration AssuranceMSP mode Chrome 42
Check for CallManagement Record inEnterprise mode andchrome 48
UCJ11.5S.CPC-AS.G.037
PassedGo to Device Inventory-> InventoryManagementand verify whether user isable create an new subgroup under User DefinedDevice Group in CiscoPrime CollaborationAssurance Enterprisemode
Create an new subgroup in DeviceInventory in Enterprisemode
UCJ11.5S.CPC-AS.G.038
PassedGo to Device Inventory-> InventoryManagementand verify whether user isable create an new subgroup under User DefinedDevice Group in CiscoPrime CollaborationAssurance MSP mode
Create an new subgroup in DeviceInventory in MSPmode
UCJ11.5S.CPC-AS.G.039
PassedGo to SystemAdministration -> FIPSsetup and verify whetherthe user is able to enableFIPS mode in CiscoPrime CollaborationAssurance Enterprisemode successfully
Checkwhether the useris able to enable FIPSmode in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.001
PassedGo to SystemAdministration -> FIPSsetup and verify whetherthe user is able to enableFIPS mode in CiscoPrime CollaborationAssurance MSP modesuccessfully
Checkwhether the useris able to enable FIPSmode in MSP mode
UCJ11.5PH2S.CPC-AS.G.002
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan206
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Activate Businessdashboard and verifywhether the user is ableupgrade from standard toEssential mode in CiscoPrime CollaborationAssurance in BE6000-Mediumsuccessfully
Check whetherActivate Businessdashboard shall allowuser to upgrade fromstandard to Essentialmode in BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.003
PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is unable to view theActivate Businessdashboardwhen upgradedfrom Standard toEssential mode in CiscoPrime CollaborationAssurance in BE6000-Mediumsuccessfully
Check whetherActivate Businessdashboard is notdisplayed in Essentialmode when upgradedfrom Standard in BE6000- Medium
UCJ11.5PH2S.CPC-AS.G.004
PassedGo to SystemAdministration and verifywhether the user is unableto view the LicenseManagement dashlet inCisco PrimeCollaboration Assurancein BE 6000- Mediumsuccessfully
Checkwhether LicenseManagement dashlet isnot listed in thedropdown underSystemAdministrationdashboard in BE 6000-Medium
UCJ11.5PH2S.CPC-AS.G.005
PassedGo to Monitor-> SystemView-> Alarm dashboardand verify whether theuser is able to view thethree applicabledashboards in CiscoPrime CollaborationAssurance Standardmodesuccessfully
Check whether thethree applicabledashboards are shownin Alarm dashboard inStandard mode
UCJ11.5PH2S.CPC-AS.G.006
PassedGo to Monitor-> SystemView and verify whetherthe user is able to viewthe Alarm dashboard bydefault in Cisco PrimeCollaboration AssuranceStandard modesuccessfully
Check whether Alarmdashboard is selectedby default in Standardmode
UCJ11.5PH2S.CPC-AS.G.007
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 207
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Getting starteddashboard and verifywhether the user is ableto view the Default Pagein Cisco PrimeCollaboration Assurancefor Standard, Advancedmode and Essential modein BE 6000-Mediumsuccessfully
Checkwhether DefaultPage is displayed inGetting Starteddashboard for Standard, Advanced mode andEssential mode
UCJ11.5PH2S.CPC-AS.G.008
PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is unable to view theGetting Started Page inhome page in Cisco PrimeCollaboration AssuranceMSP mode successfully
Checkwhether GettingStarted Page is notdisplayed in MSPmode
UCJ11.5PH2S.CPC-AS.G.009
PassedGo to Monitor-> SystemView and verify whetherCisco TelepresenceExchange tab is removedfrom System Viewdashboard in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether CiscoTelepresenceExchangetab is removed fromSystem View inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.010
PassedGo to Inventory ->Inventory Managementand verify whether CiscoTelepresence Exchangeapplication option isremoved from Discoverdevices tab in CiscoPrime CollaborationAssurance MSP modesuccessfully
Check whether CiscoTelepresenceExchangeis removed fromDiscover devices tab inMSP mode
UCJ11.5PH2S.CPC-AS.G.011
PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco Jabber for Android11.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether user isable to discover CiscoJabber for Android11.5 in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.012
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan208
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco UnifiedCommunicationsManager IM & Presence11.5 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether user isable to discover CiscoUnifiedCommunicationsManager IM &Presence 11.5 inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.013
PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco TelepresenceServer 4.3 in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether user isable to discover CiscoTelepresence Server4.3 in Enterprise mode
UCJ11.5PH2S.CPC-AS.G.014
PassedGo to Inventory->Inventory Managementand verify whether theuser is able to discoverCisco TelepresenceConductor 4.2 in CiscoPrime CollaborationAssurance MSP modesuccessfully
Check whether user isable to discover CiscoTelepresenceConductor 4.2 in MSPmode
UCJ11.5PH2S.CPC-AS.G.015
Go to Inventory->Inventory Managementand verfiy whether theuser is able to discoverCisco Unity Connection11.5 in Cisco PrimeCollaboration AssuranceMSP mode successfully
Check whether user isable to discover CiscoUnity Connection 11.5in MSP mode
UCJ11.5PH2S.CPC-AS.G.016
PassedGo to SystemAdministration-> UserManagement and verifywhether the user is ableto view the ReportViewer option is selectedby default in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether a Newuser role - ReportViewer option isselected by default inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.017
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 209
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to SystemAdministration-> UserManagement and verifywhether the user is ableto create an New user forReport Viewer role inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Create a new user forReport Viewer role inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.018
PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view Device StatusSummary tab at the topright corner in Home pagewhen logged as ReportViewer user in CiscoPrime CollaborationAssurance Enterprisemode successfully
Check whether DeviceStatus Summary tab isremoved from the topright corner in Homepage when logged asReport Viewer user inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.019
PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view the AlarmSummary tab at the topright corner in Home pagewhen logged as ReportViewer user in CiscoPrime CollaborationAssurance Enterprisemode successfully
Check whether AlarmSummary tab isremoved from the topright corner in Homepage when logged asReport Viewer user inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.020
PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view the Search tab atthe top right corner inHome page when loggedas Report Viewer user inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether Searchtab is removed fromthe top right corner inHome page whenlogged as ReportViewer user inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.021
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan210
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to SystemAdministration-> UserManagement and verifywhether the user is unableto view the Get Advancedtab at the top right cornerin Home page whenlogged as Report Vieweruser in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether GetAdvanced tab isremoved from the topright corner in Homepage when logged asReport Viewer user inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.022
PassedLogin to Cisco PrimeCollaboration Assuranceas Report Viewer userand verify whether theuser is able to view theCDR & CMR Reportspage by default in CiscoPrime CollaborationAssurance MSP modesuccessfully
Check whether ReportViewer user is able toview CDR & CMRReports page bydefault in MSP mode
UCJ11.5PH2S.CPC-AS.G.023
PassedGo to Reports-> SessionReports and verifywhether the user is ableto view Session Reportspage when logged in asReport Viewer user inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether ReportViewer user is able toview Session Reportsin Enterprise mode
UCJ11.5PH2S.CPC-AS.G.024
PassedGo to Reports-> NAM &Sensor Reports and verifywhether the user is ableto view the NAM &Sensor Report page onlywhen logged in as Reportviewer user in CiscoPrime CollaborationAssurance Enterprisemode successfully
Check whether ReportViewer user is able toview NAM & SensorReports only inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.025
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 211
Test Results SummaryCisco Prime Collaboration Assurance
PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able toupgrade from 10.5to 11.5in Enterprise modesuccessfully
Upgrade Cisco PrimeCollaborationAssurance from 10.5 to11.5 in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.026
PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able toupgrade from 11.1 to 11.5in Enterprise modesuccessfully
Upgrade Cisco PrimeCollaborationAssurance from 11.1 to11.5 in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.027
PassedLogin to Cisco PrimeCollaboration AssuranceServer as Admin throughvSphere client and verifythat user is able toupgrade from 11.1 to 11.5in MSP modesuccessfully
Upgrade Cisco PrimeCollaborationAssurance from 11.1 to11.5 in MSP mode
UCJ11.5PH2S.CPC-AS.G.028
PassedGo to Monitor-> Alarms& Events and verifywhether the user is ableto a view newNotification Email subjectformat in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether a newNotification Emailsubject format isdisplayed in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.029
PassedGo to Alarms & ReportAdministration-> EventCustomization and verifywhether the user is ableto "Edit/Delete" theadditional text for analarm in Notes for Emailin Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whether user isable to "Edit/Delete"the additional text foran alarm in Notes forEmail in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.030
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan212
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Alarms & ReportAdministration-> EventCustomization and verifywhether the user is ableto change to "Add" from"Edit/Delete" link whenan Text is deleted underNotes for Email in CiscoPrime CollaborationAssurance MSP modesuccessfully
Check whether"Edit/Delete" link ischanged to "Add" linkwhen the edited text isdeleted under Notes forEmail
UCJ11.5PH2S.CPC-AS.G.031
PassedLogin to Cisco PrimeCollaboration Assuranceand verfiy whether theuser is able to view theNetwork HealthOverview dashboard inthe main menu inEnterprise modesuccessfully
Check for NetworkHealth Overviewdashboard inEnterprise Mode
UCJ11.5PH2S.CPC-AS.G.032
PassedGo to Device Inventory->Inventory Managementand verify whether theuser is able to view theEndpoint Registrationstatus and the statusshould be reflected inCisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check for EndpointRegistration status andthe status should bereflected in Enterprisemode
UCJ11.5PH2S.CPC-AS.G.033
PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is able to validate thenaming change fromAssuranceAdministrationto Alarms & ReportsAdministration dashboardin main menu inEnterprise modesuccessfully
Check whetherAssuranceAdministrationdashboard is renamedas Alarms & ReportsAdministration inEnterprise Mode
UCJ11.5PH2S.CPC-AS.G.034
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 213
Test Results SummaryCisco Prime Collaboration Assurance
PassedLogin to Cisco PrimeCollaboration Assuranceand verify whether theuser is able to validate thenaming change fromDevice Inventory toInventory dashboard inmain menu in Enterprisemode successfully
Check whether DeviceInventory dashboard isrenamed as Inventoryin Enterprise Mode
UCJ11.5PH2S.CPC-AS.G.035
PassedGo to Diagnosedashboard and verifywhether the user is ableto validate the namingchange from CallSignalling Analyzer toSIP Call Flow Analyzerin Cisco PrimeCollaboration AssuranceMSP mode successfully
Check whether CallSignalling Analyzerdashlet is renamed asSIP Call FlowAnalyzer in Diagnosedashboard in MSPmode
UCJ11.5PH2S.CPC-AS.G.036
PassedGo to SystemAdministration and verfiywhether the user is ableto view Domain setupunder SystemAdministration which ismoved from Alarms &Reports Administrationdashboard in Cisco PrimeCollaboration AssuranceEnterprise modesuccessfully
Check whetherDomain setup ismovedto SystemAdministrationdashboard fromAlarms & ReportsAdministrationdashboard inEnterprise mode
UCJ11.5PH2S.CPC-AS.G.037
PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the CiscoTelePresence Conductor4.3 in Cisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully
Add and integrate theCisco TelePresenceServer 4.3 in InventoryManagementDashboard in Essentialmode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.038
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan214
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the CiscoExpressway X8.8 inCisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully
Add and integrate theCisco ExpresswayX8.8 in InventoryManagementDashboard in Essentialmode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.039
PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the Cisco UnityConnection 11.5 in CiscoPrime CollaborationAssurance Essentialmodein BE 6000-Mediumsuccessfully
Add and integrate theCisco UnityConnection 11.5 inInventoryManagementDashboard Essentialmode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.040
PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the CiscoTelepresence ConductorXC4.2 in Cisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully
Add and integrate theCisco TelepresenceConductor XC4.2 inInventoryManagementDashboard Essentialmode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.041
PassedGo to Inventory ->Inventory Managementand verify whether theuser is able to add andintegrate the Cisco PrimeLicense Manager 11.5 inCisco PrimeCollaboration AssuranceEssential mode in BE6000-Mediumsuccessfully
Add and integrate theCisco Prime LicenseManager 11.5 inInventoryManagementDashboard Essentialmode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.042
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 215
Test Results SummaryCisco Prime Collaboration Assurance
PassedGo to Monitor->UtilizationMonitor andverfiy whether the user isable to view theConferencing devices inConferencing devices tabwhen Cisco TelePresenceServer in managed inEssential mode for BE6000-Mediumsuccessfully
Check WhetherConferencing Devicesare displayed inUtilization Monitordashboard when CiscoTelePresence Server inmanaged in Essentialmode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.043
PassedGo to Monitor->UtilizationMonitor andverfiy whether the user isable to navigate to theCisco TelePresenceServer GUI inConferencing devices tabwhen when the IPAddress link is selectedin Essential mode for BE6000-Mediumsuccessfully
Check whether thepage is navigated toCisco TelePresenceServer GUI when theIP Address link isselected inConferencing devicestab in UtilizationMonitor dashboard inEssential mode for BE6000-Medium
UCJ11.5PH2S.CPC-AS.G.044
PassedGo to Inventory > DeviceStatus Summary andverify whether the user isable to view the DeviceStatus for the devices inManaged state inEssential mode for BE6000-Mediumsuccessfully
Check Whether theDevice status aredisplayed in DeviceStatus Summarydashboard for thedevices in Managedstate in Essential modefor BE 6000-Medium
UCJ11.5PH2S.CPC-AS.G.045
Cisco Prime Collaboration ProvisioningDefectsStatusDescriptionTitleLogical ID
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedCommunications Managercount as 1 and add to CiscoPrime CollaborationProvisioning successfullywhile using StandardMode
Licensed UnifiedCommunicationsManager count underPrime CollaborationProvisioning Capacitydashboard while usingStandard mode of PCP
UCJ11.5S.CPC-PR.G.001
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan216
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedMessage Processors countas 1 and add to Cisco PrimeCollaboration Provisioningsuccessfully while usingStandard Mode
Licensed UnifiedMessage Processorscount under PrimeCollaborationProvisioning Capacitydashboard while usingStandard mode of PCP
UCJ11.5S.CPC-PR.G.002
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedPresence count as 1 and addto Cisco PrimeCollaboration Provisioningsuccessfully while usingStandard Mode
Licensed UnifiedPresence count underPrime CollaborationProvisioning Capacitydashboard while usingStandard mode of PCP
UCJ11.5S.CPC-PR.G.003
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedCommunications Managercount as 200 and add CiscoUnified CommunicationsManager to Cisco PrimeCollaboration Provisioningsuccessfully while usingAdvanced Mode
Licensed UnifiedCommunicationsManager count underPrime CollaborationProvisioning Capacitydashboard while usingAdvanced mode of PCP
UCJ11.5S.CPC-PR.G.004
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedMessage Processors countas 200 and add Cisco UnityConnection to Cisco PrimeCollaboration Provisioningsuccessfully while usingAdvanced Mode
Licensed UnifiedMessage Processorscount under PrimeCollaborationProvisioning Capacitydashboard while usingAdvanced mode of PCP
UCJ11.5S.CPC-PR.G.005
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedPresence count as 200 andadd Cisco UnifiedCommunications ManagerIM and Presence to CiscoPrime CollaborationProvisioning successfullywhile using AdvancedMode
Licensed UnifiedPresence count underPrime CollaborationProvisioning Capacitydashboard while usingAdvanced mode of PCP
UCJ11.5S.CPC-PR.G.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 217
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedCommunications Managercount as 5 and add to CiscoPrime CollaborationProvisioning successfullywhile using Eval Mode
Licensed UnifiedCommunicationsManager count underPrime CollaborationProvisioning Capacitydashboard while usingEval mode of PCP
UCJ11.5S.CPC-PR.G.007
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedMessage Processors countas 5 and add to Cisco PrimeCollaboration Provisioningsuccessfully while usingEval Mode
Licensed UnifiedMessage Processorscount under PrimeCollaborationProvisioning Capacitydashboard while usingEval mode of PCP
UCJ11.5S.CPC-PR.G.008
PassedGo to Device Setup andverify that user is able toview Licensed UnifiedPresence count as 5 and addto Cisco PrimeCollaboration Provisioningsuccessfully while usingEval Mode
Licensed UnifiedPresence count underPrime CollaborationProvisioning Capacitydashboard while usingEval mode of PCP
UCJ11.5S.CPC-PR.G.009
PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding already existedCisco UnifiedCommunications Manager11.5 to Cisco PrimeCollaboration Provisioning
Error message indicationwhile adding alreadyexisted Cisco UnifiedCommunicationsManager 11.5 to PCPusing Device Setup
UCJ11.5S.CPC-PR.G.010
PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding already existedCisco Unity Connection11.5 to Cisco PrimeCollaboration Provisioning
Error message indicationwhile adding alreadyexisted Cisco UnityConnection 11.5 to PCPusing Device Setup
UCJ11.5S.CPC-PR.G.011
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan218
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding already existedUnified CommunicationsManager IM and Presence11.5 to Cisco PrimeCollaboration Provisioning
Error message indicationwhile adding alreadyexisted Unified CM IMand Presence 11.5 to PCPusing Device Setup
UCJ11.5S.CPC-PR.G.012
PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding Cisco UnifiedCommunications Manager11.5 to Cisco PrimeCollaboration Provisioningwhen License gets expired
Error message indicationwhile adding CiscoUnified CommunicationsManager 11.5 to PCPusing Device Setup whenLicense gets expired
UCJ11.5S.CPC-PR.G.013
PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding Cisco UnityConnection 11.5 to CiscoPrime CollaborationProvisioning using DeviceSetup when License getsexpired
Error message indicationwhile adding UnityConnection 11.5 to PCPusing Device Setup whenLicense gets expired
UCJ11.5S.CPC-PR.G.014
PassedGo to Device Setup andverify that user is able toview the respective errormessage indication whileadding Cisco UnifiedCommunications ManagerIM and Presence 11.5 toCisco Prime CollaborationProvisioning using DeviceSetup when License getsexpired
Error message indicationwhile addingUnified CMIM and Presence 11.5 toPCP using Device Setupwhen License getsexpired
UCJ11.5S.CPC-PR.G.015
PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for DND Featureand view at specified CiscoUnified CommunicationsManager Web GUI
Create Phone ButtonTemplate for DNDFeature to the respectiveCall Processor usingConfiguration Templatestab
UCJ11.5S.CPC-PR.G.016
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 219
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Forward AllFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI
Create Phone ButtonTemplate for ForwardAllFeature to the respectiveCall Processor usingConfiguration Templatestab
UCJ11.5S.CPC-PR.G.017
PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Call ParkFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI
Create Phone ButtonTemplate for Call ParkFeature to the respectiveCall Processor usingConfiguration Templatestab
UCJ11.5S.CPC-PR.G.018
PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Call BackFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI
Create Phone ButtonTemplate for Call BackFeature to the respectiveCall Processor usingConfiguration Templatestab
UCJ11.5S.CPC-PR.G.019
PassedGo to Infrastructure Setup-> Configuration Templatesand verify that user is ableto create the Phone ButtonTemplate for Call pickupFeature and view atspecified Cisco UnifiedCommunications ManagerWeb GUI
Create Phone ButtonTemplate for Call pickupFeature to the respectiveCall Processor usingConfiguration Templatestab
UCJ11.5S.CPC-PR.G.020
PassedGo to Administration ->Process Management andverify that user is able torestart Apache (WebServer) successfully
Restart Apache Serverthrough ProcessManagement
UCJ11.5S.CPC-PR.G.021
PassedGo to Administration->Process Management andverify that user is able torestart JBOSS (ApplicationServer) successfully
Restart JBOSS Serverthrough ProcessManagement
UCJ11.5S.CPC-PR.G.022
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan220
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Process Management andverify that user is able torestart NICE(Configuration Engine)Service successfully
Restart NICE Servicethrough ProcessManagement
UCJ11.5S.CPC-PR.G.023
PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while restartApache(Web Server)successfully
Message notificationwhile restart ApacheServer through ProcessManagement
UCJ11.5S.CPC-PR.G.024
PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while restartJBOSS (ApplicationServer) successfully
Message notificationwhile restart JBOSSServer through ProcessManagement
UCJ11.5S.CPC-PR.G.025
PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while restartNICE (ConfigurationEngine) Servicesuccessfully
Message notificationwhile restart NICEService through ProcessManagement
UCJ11.5S.CPC-PR.G.026
PassedGo to Administration ->Process Management andverify that user is able toreboot Cisco PrimeCollaboration ProvisioningServer successfully
Reboot Cisco PrimeCollaborationProvisioning Serverthrough ProcessManagement
UCJ11.5S.CPC-PR.G.027
PassedGo to Administration ->Process Management andverify that user is able viewthe respective messagenotification while rebootCisco Prime CollaborationProvisioning Serversuccessfully
Message notificationwhile reboot Cisco PrimeCollaborationProvisioning Serverthrough ProcessManagement
UCJ11.5S.CPC-PR.G.028
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 221
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration->Process Management andverify that user is able torestart All Processes(Postgres, Apache (WebServer), JBOSS(Application Server), NICE(Configuration Engine)) atthe same time successfully
Restart All Processes(Postgres, Apache (WebServer), JBOSS(Application Server),NICE (ConfigurationEngine)) at the same timethrough ProcessManagement
UCJ11.5S.CPC-PR.G.029
PassedGo to Administration->Process Management andverify that user is able toview the respectivemessage notification whilerestart All Processes(Postgres, Apache (WebServer), JBOSS(Application Server), NICE(Configuration Engine)) atthe same time successfully
Message notificationwhile restart AllProcesses (Postgres,Apache (Web Server),JBOSS (ApplicationServer), NICE(Configuration Engine))at the same time throughProcess Management
UCJ11.5S.CPC-PR.G.030
PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forPostgres Service throughCisco Prime CollaborationProvisioning successfully
Status and Up Time forPostgres Service placedunder ProcessManagement using PCP
UCJ11.5S.CPC-PR.G.031
PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forApache (Web Server)through Cisco PrimeCollaboration Provisioningsuccessfully
Status and Up Time forApache (Web Server)placed under ProcessManagement using PCP
UCJ11.5S.CPC-PR.G.032
PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forJBOSS (ApplicationServer) through CiscoPrime CollaborationProvisioning successfully
Status and Up Time forJBOSS (ApplicationServer) placed underProcess Managementusing PCP
UCJ11.5S.CPC-PR.G.033
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan222
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Process Management andverify that user is able toview the status as runningand correct up time forNICE (ConfigurationEngine) Service throughCisco Prime CollaborationProvisioning successfully
Status and Up Time forNICE (ConfigurationEngine) Service placedunder ProcessManagement using PCP
UCJ11.5S.CPC-PR.G.034
PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for Process Nameand search ProcessManagement Historydetails based on the Processname successfully
Create Manage PresetFilters for Process Nameto search ProcessManagement Historydetails
UCJ11.5S.CPC-PR.G.035
PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for Reason andsearch ProcessManagement Historydetails based on the Reasonsuccessfully
Create Manage PresetFilters for Reason tosearch ProcessManagement Historydetails
UCJ11.5S.CPC-PR.G.036
PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for Restart Date andsearch ProcessManagement Historydetails based on the RestartDate successfully
Create Manage PresetFilters for Restart Date tosearch ProcessManagement Historydetails
UCJ11.5S.CPC-PR.G.037
PassedGo to Administration ->Process Management andverify that user is able tocreate Manage PresetFilters for User and searchProcess ManagementHistory details based on theUser successfully
Create Manage PresetFilters for User to searchProcess ManagementHistory details
UCJ11.5S.CPC-PR.G.038
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 223
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Process Management andverify that user is able todelete Manage PresetFilters which is created forUser to search ProcessManagement Historydetails successfully
Delete Manage PresetFilters which is createdfor User to searchProcess ManagementHistory details
UCJ11.5S.CPC-PR.G.039
PassedGo to Administration ->Process Management andverify that user is able todelete Manage PresetFilters which is created forProcess Name to searchProcess ManagementHistory details successfully
Delete Manage PresetFilters which is createdfor Process Name tosearch ProcessManagement Historydetails
UCJ11.5S.CPC-PR.G.040
PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and checkall the Directory Numbersknown by Cisco PrimeCollaboration Provisioningare available in the Report
Generate and view all theDNs known by PCP areavailable in DirectoryNumber InventoryReport
UCJ11.5S.CPC-PR.G.041
PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and check"status of the DirectoryNumbers as unassigned"details are available in theReport
Generate and view"status of the DirectoryNumbers as unassigned"details are available inDirectory NumberInventory Report
UCJ11.5S.CPC-PR.G.042
PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and check"status of the DirectoryNumbers as assigned"details are available in theReport
Generate and view"status of the DirectoryNumbers as assigned"details are available inDirectory NumberInventory Report
UCJ11.5S.CPC-PR.G.043
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan224
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Reports -> DirectoryNumber Inventory andverify that user is able togenerate Directory NumberInventory Report and check"status of the DirectoryNumbers as reserved"details are available in theReport
Generate and view"status of the DirectoryNumbers as reserved"details are available inDirectory NumberInventory Report
UCJ11.5S.CPC-PR.G.044
PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting the local userthrough Cisco PrimeCollaboration Provisioningsuccessfully
Check all the associatedServices are gettingdeleted when trying todelete local user fromUser Provisioning page
UCJ11.5S.CPC-PR.G.045
PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting CiscoUnified CommunicationsManager Imported userthrough Cisco PrimeCollaboration Provisioningsuccessfully
Check all the associatedServices are gettingdeleted when trying todelete user imported fromUnified CM using UserProvisioning page
UCJ11.5S.CPC-PR.G.046
PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting LDAPImported user throughCisco Prime CollaborationProvisioning successfully
Check all the associatedServices are gettingdeleted when trying todelete LDAP Importeduser using UserProvisioning page
UCJ11.5S.CPC-PR.G.047
PassedGo to User Provisioningand verify that user is ableto check all the associatedServices are getting deletedwhen deleting JapaneseUser ID through CiscoPrime CollaborationProvisioning successfully
Check all the associatedServices are gettingdeleted when trying todelete Japanese User IDusing User Provisioningpage
UCJ11.5S.CPC-PR.G.048
PassedVerify that user is able toupgrade Cisco PrimeCollaboration Provisioningfrom 10.6 to 11.5successfully
Upgrade PCPProvisioning from 10.6to 11.5
UCJ11.5S.CPC-PR.G.049
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 225
Test Results SummaryCisco Prime Collaboration Provisioning
PassedVerify that user is able toupgrade Cisco PrimeCollaboration Provisioningfrom 11.0 to 11.5successfully
Upgrade PCPProvisioning from 11.0to 11.5
UCJ11.5S.CPC-PR.G.050
PassedVerify that user is able toinstall Cisco PrimeCollaboration Provisioning11.5 after skip installing ofRoot Package successfully
Skip installing of Rootpackage while installingCisco PrimeCollaborationProvisioning 11.5
UCJ11.5S.CPC-PR.G.051
PassedVerify that user is able toskip "asking for the Rootpassword option" whileinstalling Cisco PrimeCollaboration Provisioning11.5 successfully
Skip "asking for the Rootpassword option" whileinstalling Cisco PrimeCollaborationProvisioning 11.5
UCJ11.5S.CPC-PR.G.052
PassedVerify that user is able toview root package getsremoved after upgradeCisco Prime CollaborationProvisioning from 10.6 to11.5 successfully
View the root packageafter upgrade CiscoPrime CollaborationProvisioning from 10.6to 11.5
UCJ11.5S.CPC-PR.G.053
PassedVerify that user is unableto access file system usingRoot credentials afterupgrade Cisco PrimeCollaboration Provisioningfrom 10.6 to 11.5successfully
"Disable the root accessto file system" afterupgrade Cisco PrimeCollaborationProvisioning from 10.6to 11.5
UCJ11.5S.CPC-PR.G.054
PassedVerify that user is able toview root package getsremoved after upgradeCisco Prime CollaborationProvisioning from 11.0 to11.5 successfully
View the root packageafter upgrade CiscoPrime CollaborationProvisioning from 11.0to 11.5
UCJ11.5S.CPC-PR.G.055
PassedVerify that user is unableto access file system usingRoot credentials afterupgrade Cisco PrimeCollaboration Provisioningfrom 11.0 to 11.5successfully
"Disable the root accessto file system" afterupgrade Cisco PrimeCollaborationProvisioning from 11.0to 11.5
UCJ11.5S.CPC-PR.G.056
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan226
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllCall Processors withSynchronization option as"Force DomainSynchronization" and checkthe results successfully
ScheduleSynchronization for AllCall Processors withSynchronization optionas "Force DomainSynchronization"
UCJ11.5S.CPC-PR.G.057
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllCall Processors withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully
ScheduleSynchronization for AllCall Processors withSynchronization optionas "Run devicesynchronization inparallel"
UCJ11.5S.CPC-PR.G.058
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllCall Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully
ScheduleSynchronization for AllCall Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.5S.CPC-PR.G.059
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllMessage Processors withSynchronization option as"Force DomainSynchronization" and checkthe results successfully
ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Force DomainSynchronization"
UCJ11.5S.CPC-PR.G.060
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 227
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllMessage Processors withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully
ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Run devicesynchronization inparallel"
UCJ11.5S.CPC-PR.G.061
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllMessage Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully
ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.5S.CPC-PR.G.062
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllPresence Processors withSynchronization option as"Force DomainSynchronization" and checkthe results successfully
ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Force DomainSynchronization"
UCJ11.5S.CPC-PR.G.063
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllPresence Processors withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully
ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Run devicesynchronization inparallel"
UCJ11.5S.CPC-PR.G.064
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan228
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllPresence Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully
ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.5S.CPC-PR.G.065
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllLDAPs withSynchronization option as"Force DomainSynchronization" and checkthe results successfully
ScheduleSynchronization for AllLDAPs withSynchronization optionas "Force DomainSynchronization"
UCJ11.5S.CPC-PR.G.066
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllLDAPs withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully
ScheduleSynchronization for AllLDAPs withSynchronization optionas "Run devicesynchronization inparallel"
UCJ11.5S.CPC-PR.G.067
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllLDAPs withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults successfully
ScheduleSynchronization for AllLDAPs withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.5S.CPC-PR.G.068
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 229
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllDomains withSynchronization option as"Force DomainSynchronization" and checkthe results successfully
ScheduleSynchronization for AllDomains withSynchronization optionas "Force DomainSynchronization"
UCJ11.5S.CPC-PR.G.069
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto ScheduleSynchronization for AllDomains withSynchronization option as"Run devicesynchronization in parallel"and check the resultssuccessfully
ScheduleSynchronization for AllDomains withSynchronization optionas "Run devicesynchronization inparallel"
UCJ11.5S.CPC-PR.G.070
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to updateAlerting Name for HuntPilot through Batch filesuccessfully
Update Alerting Namefor Hunt Pilot throughBatch file
UCJ11.5S.CPC-PR.G.071
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to updateASCII Alerting Name forHunt Pilot through Batchfile successfully
Update ASCII AlertingName for Hunt Pilotthrough Batch file
UCJ11.5S.CPC-PR.G.072
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to updateVoicemail Destinationsettings for Hunt Pilotthrough Batch filesuccessfully
Update VoicemailDestination settings forHunt Pilot through Batchfile
UCJ11.5S.CPC-PR.G.073
PassedGo to User Provisioningand verify that user is ableto create CustomADFieldsfor LDAP Sync UsersSuccessfully
Create CustomADFieldsfor LDAP Sync Users
UCJ11.5S.CPC-PR.G.074
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan230
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to User Provisioningand verify that user is ableto Modify Custom ADFields for LDAP SyncUsers Successfully
Modify Custom ADFields for LDAP SyncUsers
UCJ11.5S.CPC-PR.G.075
PassedGo to User Provisioningand verify that user is ableto delete CustomADFieldsfor LDAP Sync UsersSuccessfully
Delete CustomADFieldsfor LDAP Sync Users
UCJ11.5S.CPC-PR.G.076
CSCux33247FailedVerify that user is able toview Cisco PrimeCollaboration Provisioninglogin page version as 11.5after interim Upgrade inJapanese Environmentsuccessfully
Version Status afterupgraded CPCProvisioning 11.5 inJapanese Environment
UCJ11.5S.CPC-PR.G.077
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatclicking on 'change' fromquick view hasprepopulated values forservice templates,Extension Mobility phonetype, protocol and phonebutton template attributesfrom Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully
In 'change' from quickview, service templateattributes values areprepopulated from EMaccess service template
UCJ11.2S.CPC-PR.G.001
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatclicking on 'change' fromquick view hasprepopulated values forservice templates,Extension Mobility phonetype, protocol and phonebutton template attributesfrom Extension Mobilityaccess service templatewhen there is more thanone Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully
In 'change' from quickview, service templateattributes values areprepopulated from EMaccess service templatewhen there is more thanone EM access servicetemplate
UCJ11.2S.CPC-PR.G.002
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 231
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatwhile ordering ExtensionMobility Access aftercreating new user,Extension Mobility phonetype, protocol and phonebutton template attributesare prepopulated from onlyone Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully
Check while orderingEMAccess after creatingnew user, attributes areprepopulated from onlyone EM access servicetemplate
UCJ11.2S.CPC-PR.G.003
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatduring auto-provisioning,Extension Mobility phonetype is updated with thephone model selected inUser Role page in CiscoPrime CollaborationProvisioning Successfully
Verify duringauto-provisioning, EMphone type is updatedwith the phone modelselected in User Rolepage
UCJ11.2S.CPC-PR.G.004
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatduring quick-provisioning,Extension Mobility phonetype is updated with thephone model selected inUser Role page in CiscoPrime CollaborationProvisioning Successfully
Verify duringquick-provisioning, EMphone type is updatedwith the phone modelselected in User Rolepage
UCJ11.2S.CPC-PR.G.005
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatclicking on 'View' fromquick view hasprepopulated values forservice templates,Extension Mobility phonetype, protocol and phonebutton template attributesfrom Extension Mobilityaccess service template inCisco Prime CollaborationProvisioning Successfully
In 'View' from quickview, service templateattributes values areprepopulated from EMaccess service template
UCJ11.2S.CPC-PR.G.006
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan232
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatuser is able to checkUniversal phonemodel hasthe Protocols SIP, SCCPand Either and phonebutton template attribute isnot displayed for ExtensionMobility Access ServiceTemplate in Cisco PrimeCollaboration ProvisioningSuccessfully
Verify Universal phonemodel has the Protocolsand no "phone buttontemplate attribute"displayed in EM AccessService Template
UCJ11.2S.CPC-PR.G.007
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatuser is able to check theUniversal Phone Templateis populated in Endpointmodel while ExtensionMobility Access Servicetemplate creation in CiscoPrime CollaborationProvisioning Successfully
Verify Universal PhoneTemplate is populated inEndpoint model whileEM Access Servicetemplate creation
UCJ11.2S.CPC-PR.G.008
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify thatuser is able to checkUniversal phone modeladded in the servicetemplate assignment tableunder User roles page inCisco Prime CollaborationProvisioning Successfully
Verify service templateassignment table hasUniversal phone model
UCJ11.2S.CPC-PR.G.009
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 233
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Provisioning Setup-> domain -> Servicetemplate and verify that oncreation of ExtensionMobility Access Servicetemplate, ExtensionMobility phone type withphone list values, Protocoland Phone Button templateattributes are displayedunder ProvisioningAttributes -> BasicExtensionMobility AccessInformation in Cisco PrimeCollaboration ProvisioningSuccessfully
Creation of EM AccessService templateattributes are displayedunder ProvisioningAttributes -> BasicExtension MobilityAccess Information
UCJ11.2S.CPC-PR.G.010
PassedGo to Device Setup andverify that user is able toAdd Cisco UnifiedComminications Managerwith 'Synchronization andAuthentication' in CiscoPrime CollaborationProvisioning by integratingLightweight DirectoryAccess Protocol to CiscoUnified ComminicationsManager Successfully
Add Unified CM with'Synchronization andAuthentication' byintegrating LDAP toUnified CM
UCJ11.2S.CPC-PR.G.011
PassedGo to Device Setup andverify that user is able toAdd Cisco UnifiedComminications Managerwith 'Synchronization' inCisco Prime CollaborationProvisioning by integratingLightweight DirectoryAccess Protocol to CiscoUnified ComminicationsManager Successfully
Add Unified CM with'Synchronization' byintegrating LDAP toUnified CM
UCJ11.2S.CPC-PR.G.012
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan234
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Device Setup andverify that user is ableassign few authorizationrole for user synced fromLightweight DirectoryAccess Protocol and loginto Cisco PrimeCollaboration Provisioningwith sync user and checkcorresponding megamenuis listing successfully
Assign few authorizationrole for user synced fromLDAP and login withsync user and checkcorrespondingmegamenuis listing
UCJ11.2S.CPC-PR.G.013
PassedGo to Device Setup andverify that user is able tocheck the proper errormessage while givinginvalid credentials forLightweight DirectoryAccess Protocol in CiscoPrime CollaborationProvisioning Successfully
Check for invalidcredentials is showingproper error message forLDAP
UCJ11.2S.CPC-PR.G.014
PassedGo to Device Setup andverify that user is able tocheck the domainintegrated with OpenLightweight DirectoryAccess Protocol is showingin the import user page inCisco Prime CollaborationProvisioning successfully
Check the domainintegrated withOpenLDAP is showingin the import user page
UCJ11.2S.CPC-PR.G.015
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addDistribution list fromCiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully
Add and schedule a batchfile to add Distributionlist in Cisco UnityConnection
UCJ11.2S.CPC-PR.G.016
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Distribution listfrom Cisco PrimeCollaboration Provisioningto Cisco Unity Connectionsuccessfully
Add and schedule a batchfile to changeDistribution list in CiscoUnity Connection
UCJ11.2S.CPC-PR.G.017
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 235
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Distribution listfrom Cisco PrimeCollaboration Provisioningto Cisco Unity Connectionsuccessfully
Add and schedule a batchfile to cancel Distributionlist in Cisco UnityConnection
UCJ11.2S.CPC-PR.G.018
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addDirectory Handler fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to add DirectoryHandler
UCJ11.2S.CPC-PR.G.019
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Directory Handlerfrom Cisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to change DirectoryHandler
UCJ11.2S.CPC-PR.G.020
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Directory Handlerfrom Cisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to cancel DirectoryHandler
UCJ11.2S.CPC-PR.G.021
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addCall Handler from CiscoPrime CollaborationProvisioning successfully
Add and schedule a batchfile to Add Call Handler
UCJ11.2S.CPC-PR.G.022
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan236
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Call Handler fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to Cancel CallHandler
UCJ11.2S.CPC-PR.G.023
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Call HandlerGreeting from Cisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to Change CallHandler Greeting
UCJ11.2S.CPC-PR.G.024
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addRoute Partition from CiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully
Add and schedule a batchfile to add Route Partition
UCJ11.2S.CPC-PR.G.025
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Route Partitionfrom Cisco PrimeCollaboration Provisioningto Cisco Unity Connectionsuccessfully
Add and schedule a batchfile to change RoutePartition
UCJ11.2S.CPC-PR.G.026
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addUser Role from CiscoPrime CollaborationProvisioning successfully
Add and schedule a batchfile to Add User Role
UCJ11.2S.CPC-PR.G.027
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 237
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange User Role fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to Change User Role
UCJ11.2S.CPC-PR.G.028
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file todelete User Role fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to Delete User Role
UCJ11.2S.CPC-PR.G.029
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange User withAdditional Settings fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to Change User withAdditional Settings
UCJ11.2S.CPC-PR.G.030
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange User Servicesservice template fromCiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully
Add and schedule a batchfile to change UserServices service template
UCJ11.2S.CPC-PR.G.031
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel User Servicesservice template fromCiscoPrime CollaborationProvisioning to CiscoUnityConnection successfully
Add and schedule a batchfile to cancel UserServices service template
UCJ11.2S.CPC-PR.G.032
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan238
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addSubscriber Template fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to add SubscriberTemplate
UCJ11.2S.CPC-PR.G.033
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange SubscriberTemplate fromCisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to change SubscriberTemplate
UCJ11.2S.CPC-PR.G.034
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Subscriber Templatefrom Cisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to cancel SubscriberTemplate
UCJ11.2S.CPC-PR.G.035
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file to addLocation fromCisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to Add Location
UCJ11.2S.CPC-PR.G.036
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Location fromCisco Prime CollaborationProvisioning successfully
Add and schedule a batchfile to Change Location
UCJ11.2S.CPC-PR.G.037
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 239
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tocancel Location fromCiscoPrime CollaborationProvisioning successfully
Add and schedule a batchfile to Cancel Location
UCJ11.2S.CPC-PR.G.038
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to add andschedule a batch file tochange Physical Locationfrom Cisco PrimeCollaboration Provisioningsuccessfully
Add and schedule a batchfile to Change PhysicalLocation
UCJ11.2S.CPC-PR.G.039
PassedVerify that user is able toupgrade Cisco PrimeCollaboration Provisioningfrom 11.0 to 11.2successfully
Upgrade Cisco PrimeCollaborationProvisioning from 11.0to 11.2
UCJ11.2S.CPC-PR.G.040
PassedVerify that user is able toupgrade Cisco PrimeCollaboration Provisioningfrom 11.1 to 11.2successfully
Upgrade Cisco PrimeCollaborationProvisioning from 11.1to 11.2
UCJ11.2S.CPC-PR.G.041
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCiscoCallManager Servicein Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco CallManager Service inUnified CMServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.042
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan240
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco Call ManagerService in Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco CallManager Service inUnified CMServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.043
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCiscoCTIManager Servicein Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco CTIManager Service inUnified CMServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.044
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco CTI ManagerService in Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco CTIManager Service inUnified CMServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.045
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco CallManager SNMPService in Cisco UnifiedCommunications ManagerSNMP Serviceability pageusing Batch Provisioningthrough Cisco PrimeCollaboration Provisioningsuccessfully
Activating Cisco CallManager SNMP Servicein Unified CMServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.046
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 241
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco Call ManagerSNMP Service in CiscoUnified CommunicationsManager Serviceabilitypage using BatchProvisioning through CiscoPrime CollaborationProvisioning successfully
Deactivating Cisco CallManager SNMP Servicein Unified CMServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.047
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco AXLWeb Service inCisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco AXLWeb Service in UnifiedCM Serviceability pageusing Batch file
UCJ11.2S.CPC-PR.G.048
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco AXL WebService in Cisco UnifiedCommunications ManagerServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco AXLWeb Service in UnifiedCM Serviceability pageusing Batch files
UCJ11.2S.CPC-PR.G.049
PassedLogin as AdministratorUser and verify that user isable to access UserProvisioning in CiscoPrime CollaborationProvisioning successfully
Accessing UserProvisioning Page bylogging in asAdministrator
UCJ11.2S.CPC-PR.G.050
PassedGo to User Provisioningand verify thatAdministrator user is ableto add an user in CiscoPrime CollaborationProvisioning successfully
Access Control to add anuser in User Provisioningpage by logging in asAdministrator
UCJ11.2S.CPC-PR.G.051
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan242
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to User Provisioningand verify thatAdministrator user is ableto delete an user in CiscoPrime CollaborationProvisioning successfully
Access Control to deletean user in UserProvisioning page bylogging in asAdministrator
UCJ11.2S.CPC-PR.G.052
PassedLogin as Order AccessUser and verify that user isable to access UserProvisioning in CiscoPrime CollaborationProvisioning successfully
Accessing UserProvisioning Page bylogging in as OrderAccess User
UCJ11.2S.CPC-PR.G.053
PassedGo to User Provisioningand verify that OrderAccess user is able to adduser in Cisco PrimeCollaboration Provisioningsuccessfully
Access Control to add anuser in User Provisioningpage by logging in asOrder Access User
UCJ11.2S.CPC-PR.G.054
Go to User Provisioningand verify that OrderAccess user is able to deletean user in Cisco PrimeCollaboration Provisioningsuccessfully
Access Control forDelete an user in UserProvisioning page bylogging in as OrderAccess User
UCJ11.2S.CPC-PR.G.055
PassedLogin asMaintenance Userand verify that UserProvisioning page isunavailable in Cisco PrimeCollaboration Provisioningsuccessfully
Restriction of accessingUser Provisioning pagefor Maintenance User
UCJ11.2S.CPC-PR.G.056
PassedLogin as Approval Userand verify that UserProvisioning page isunavailable in Cisco PrimeCollaboration Provisioningsuccessfully
Restriction of accessingUser Provisioning pagefor Approval User
UCJ11.2S.CPC-PR.G.057
PassedLogin as Assignment Userand verify that UserProvisioning page isunavailable in Cisco PrimeCollaboration Provisioningsuccessfully
Restriction of accessingUser Provisioning pagefor Assignment User
UCJ11.2S.CPC-PR.G.058
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 243
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco AXLWeb Service inCisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco AXLWeb Service in UnifiedCM IM & PresenceServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.059
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco AXL WebService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco AXLWeb Service in UnifiedCM IM & PresenceServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.060
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco SIP Proxy Service inCisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco SIPProxy Service in UnifiedCM IM & PresenceServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.061
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco SIP ProxyService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco SIPProxy Service in UnifiedCM IM & PresenceServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.062
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan244
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco XCP ConnectionManager Service in CiscoUnified CommunicationsManager IM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco XCPConnection ManagerService in Unified CMIM & PresenceServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.063
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco XCP ConnectionManager Service in CiscoUnified CommunicationsManager IM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco XCPConnection ManagerService in Unified CMIM & PresenceServiceability page usingBatch file
UCJ11.2S.CPC-PR.G.064
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco XCP AuthenticationService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco XCPAuthentication Service inUnified CM IM &Presence Serviceabilitypage using Batch file
UCJ11.2S.CPC-PR.G.065
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco XCPAuthentication Service inCisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco XCPAuthentication Service inUnified CM IM &Presence Serviceabilitypage using Batch file
UCJ11.2S.CPC-PR.G.066
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 245
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco XCP TextConference ManagerService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating Cisco XCPText ConferenceManager Service inUnified CM IM &Presence Serviceabilitypage using Batch file
UCJ11.2S.CPC-PR.G.067
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco XCP TextConference ManagerService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating Cisco XCPText ConferenceManager Service inUnified CM IM &Presence Serviceabilitypage using Batch file
UCJ11.2S.CPC-PR.G.068
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to activate theCisco Presence EngineService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Activating CiscoPresence Engine Servicein Unified CM IM &Presence Serviceabilitypage using Batch file
UCJ11.2S.CPC-PR.G.069
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan246
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to deactivatethe Cisco Presence EngineService in Cisco UnifiedCommunications ManagerIM & PresenceServiceability page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Deactivating CiscoPresence Engine Servicein Unified CM IM &Presence Serviceabilitypage using Batch file
UCJ11.2S.CPC-PR.G.070
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can enable the CiscoCamera in Cisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Enabling Cisco Camerain Unified CMEnterprisePhone Configurationpage using Batch files
UCJ11.2S.CPC-PR.G.071
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can disable the CiscoCamera in Cisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Disabling Cisco Camerain Unified CMEnterprisePhone Configurationpage using Batch files
UCJ11.2S.CPC-PR.G.072
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can enable RTCP inCisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Enabling RTCP inUnified CM EnterprisePhone Configurationpage using Batch files
UCJ11.2S.CPC-PR.G.073
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 247
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser can disable RTCP inCisco UnifiedCommunications ManagerEnterprise PhoneConfiguration page usingBatch Provisioning throughCisco Prime CollaborationProvisioning successfully
Disabling RTCP inUnified CM EnterprisePhone Configurationpage using Batch files
UCJ11.2S.CPC-PR.G.074
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllCall Processors withSynchronization option as"Abort synchronization ondevice synchronizationfailure" and check theresults in Cisco PrimeCollaboration Provisioningsuccessfully
Cancelling of ScheduleSynchronization for AllCall Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.2S.CPC-PR.G.075
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllMessage Processors withSynchronization option as" Force Domainsynchronization " andcheck the results in CiscoPrime CollaborationProvisioning successfully
Cancelling of ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Force Domainsynchronization"
UCJ11.2S.CPC-PR.G.076
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllPresence Processors withSynchronization option as"Run devicesynchronization in Parallel"and check the results inCisco Prime CollaborationProvisioning successfully
Cancelling of ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Run devicesynchronization inParallel"
UCJ11.2S.CPC-PR.G.077
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan248
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Administration ->Schedule Synchronizationand verify that user is ableto cancel the ScheduleSynchronization for AllLDAPs Processors withSynchronization option as"Run devicesynchronization in Parallel"and check the results inCisco Prime CollaborationProvisioning successfully
Cancelling of ScheduleSynchronization for AllLDAP Processors withSynchronization optionas "Run devicesynchronization inParallel"
UCJ11.2S.CPC-PR.G.078
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Add Batchthat supports the ExtensionMobility Access Templateto check the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributes whileordering in Cisco PrimeCollaboration Provisioningsuccessfully
Add Batch that supportsthe EM Access Templateto check the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributeswhileordering
UCJ11.2S.CPC-PR.G.079
PassedGo to Advancedprovisioning -> BatchProvisioning and verify thatuser is able to Add Batchthat supports the PhoneTemplate to check theforward and backwardtruncation in keywordfunctionality isimplemented for thesupported attributes whileordering in Cisco PrimeCollaboration Provisioningsuccessfully
Add Batch that supportsthe Phone Template tocheck the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributeswhileordering
UCJ11.2S.CPC-PR.G.080
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 249
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Show Line LabelSettings to TRUE usingEnterprise Parameter Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check ShowLine Label Settingschange for EnterpriseParameter through Batchfile
UCJ11.2S.CPC-PR.G.081
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Show Ring Settingsto FALSE using EnterpriseParameter Batch file inCisco Prime CollaborationProvisioning successfully
Update and check ShowRing Settings change forEnterprise Parameterthrough Batch file
UCJ11.2S.CPC-PR.G.082
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Busy lamp Fieldusing Call Lists to Enabledusing Enterprise ParameterBatch file in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check BLFFor Call Lists change forEnterprise Parameterthrough Batch file
UCJ11.2S.CPC-PR.G.083
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Enable EM toFALSE using Phoneconfiguration Batch file inCisco Prime CollaborationProvisioning successfully
Update and check EnableExtension Mobilitychange for Phoneconfiguration throughBatch file
UCJ11.2S.CPC-PR.G.084
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Phone Type to CiscoUnified IP Phone 7975Gusing Phone configurationBatch file in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check PhoneType change for Phoneconfiguration throughBatch file
UCJ11.2S.CPC-PR.G.085
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan250
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Allow Control ofdevice to CTI to TRUEusing Phone configurationBatch file in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check AllowControl of device to CTIchange for Phoneconfiguration throughBatch file
UCJ11.2S.CPC-PR.G.086
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Do Not Disturb toFALSE using EM Accessconfiguration Batch file inCisco Prime CollaborationProvisioning successfully
Update and checkDoNotDisturb change for EMAccess configurationthrough Batch file
UCJ11.2S.CPC-PR.G.087
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck MultilevelPrecedence and PreemptionIndication to ON usingExtensionMobility Accessconfiguration Batch file inCisco Prime CollaborationProvisioning successfully
Update and check MLPPIndication change for EMAccess configurationthrough Batch file
UCJ11.2S.CPC-PR.G.088
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Ignore PresentationIndicators to False usingExtensionMobility Accessconfiguration Batch file inCisco Prime CollaborationProvisioning successfully
Update and check IgnorePresentation Indicatorschange for EM Accessconfiguration throughBatch file
UCJ11.2S.CPC-PR.G.089
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 251
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Timer to 15 secondsusing EM Lineconfiguration Batch file inCisco Prime CollaborationProvisioning successfully
Update and check Timerchange for EM lineconfiguration throughBatch file
UCJ11.2S.CPC-PR.G.090
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Log Missed Calls toFalse using ExtensionMobility Line configurationBatch file in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check LogMissed Calls change forEM line configurationthrough Batch file
UCJ11.2S.CPC-PR.G.091
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Update andcheck Reject AnonymousCalls to False usingExtension Mobility Lineconfiguration Batch file inCisco Prime CollaborationProvisioning successfully
Update and check RejectAnonymousCalls changefor EM line configurationthrough Batch file
UCJ11.2S.CPC-PR.G.092
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Delay before theFirst Notification Attemptto 5 mins using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check Delaybefore the FirstNotification Attemptchange for Voicemail -SMTP Notificationthrough Batch file
UCJ11.2S.CPC-PR.G.093
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan252
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Notification RepeatInterval to 10 mins usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and check DelayNotification RepeatInterval change forVoicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.094
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All Messages toEnabled using Voicemail -SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check AllMessages change forVoicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.095
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All Voice Messagesto Disabled usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and check AllVoice Messages changefor Voicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.096
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All DispatchMessages to Disabled usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and check AllDispatch Messageschange for Voicemail -SMTP Notificationthrough Batch file
UCJ11.2S.CPC-PR.G.097
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 253
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck All Fax Messages toDisabled using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully
Update and check FaxMessages change forVoicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.098
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Enable NotificationDevice to FALSE usingVoicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and check EnableNotification Devicechange for Voicemail -SMTP Notificationthrough Batch file
UCJ11.2S.CPC-PR.G.099
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Calendar Meetingsto Enabled using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully
Update and checkCalendar Meetingschange for Voicemail -SMTP Notificationthrough Batch file
UCJ11.2S.CPC-PR.G.100
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck CalendarAppointments to Enabledusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and checkCalendar Appointmentschange for Voicemail -SMTP Notificationthrough Batch file
UCJ11.2S.CPC-PR.G.101
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan254
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck SimpleMail TransferProtocol Enabled to Falseusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and check SMTPEnabled change forVoicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.102
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Include a Link toWeb inbox in Message textto FALSE using Voicemail- SMTP Notification Batchfile in Cisco PrimeCollaboration Provisioningsuccessfully
Update and checkInclude a Link to Webinbox inMessage text forVoicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.103
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Message Count inMessage text to TRUEusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and checkInclude Message Countin Message text changefor Voicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.104
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheckMessage Informationin Message text to TRUEusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and checkInclude MessageInformation in Messagetext change forVoicemail - SMTPNotification throughBatch file
UCJ11.2S.CPC-PR.G.105
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 255
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to update andcheck Send Transaction ofVoiceMessages to Enabledusing Voicemail - SMTPNotification Batch file inCisco Prime CollaborationProvisioning successfully
Update and check SendTransaction of VoiceMessages change forVoicemail - SMTPNotification throughBatch file
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to Add Batchthat supports RemoteDesktop Protocol Productto check the forward andbackward truncation inkeyword functionality isimplemented for thesupported attributes whileordering in Cisco PrimeCollaboration Provisioningsuccessfully
Add Batch that supportsRDP Product to check theforward and backwardtruncation in keywordfunctionality isimplemented for thesupported attributeswhileordering
UCJ11.2S.CPC-PR.G.106
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to cancel theSchedule Synchronizationfor All Message Processorswith Synchronizationoption as "Abortsynchronization on devicesynchronization failure"and check the results inCisco Prime CollaborationProvisioning successfully
Cancelling of ScheduleSynchronization for AllMessage Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.2S.CPC-PR.G.107
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan256
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to AdvancedProvisioning -> BatchProvisioning and verify thatuser is able to cancel theSchedule Synchronizationfor All Presence Processorswith Synchronizationoption as "Abortsynchronization on devicesynchronization failure"and check the results inCisco Prime CollaborationProvisioning successfully
Cancelling of ScheduleSynchronization for AllPresence Processors withSynchronization optionas "Abortsynchronization ondevice synchronizationfailure"
UCJ11.2S.CPC-PR.G.108
PassedLogin to Provisioning GUIand verify that user is ableto integrate Prime LicenseManager with Provisioning
Integrating PLM withProvisioning
UCJ11.2S.CPC-PR.G.109
PassedLogin to Provisioning GUIand verify that user is ableto check for Prime LicenseManager in AdministrationDashboard
Check for PLM inAdministrationDashboard
UCJ11.2S.CPC-PR.G.110
PassedLogin to Provisioning GUI=> Administration andverify that user is able toview Cisco Prime LicenseManager application onclicking Prime LicenseManager link on PrimeCollaboration Provisioning
View Cisco PLMapplication on clickingPLM link on PCP
UCJ11.2S.CPC-PR.G.111
PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to addParticipant Templates forthe specified CiscoTelepresence ManagementSuite through Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredParticipant Templates isreplicated at CiscoTelepresence ManagementSuite Sucessfully
Add and validateParticipant Templates forthe specified Cisco TMSusing InfrastructureConfiguration inBE7000-M
UCJ11.2S.CPC-PR.G.112
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 257
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to addConference Templates forthe specified CiscoTelepresence ManagementSuite through Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredConference Templates isreplicated at CiscoTelepresence ManagementSuite Successfully
Add and validateConference Templatesfor the specified CiscoTMS using InfrastructureConfiguration inBE7000-M
UCJ11.2S.CPC-PR.G.113
PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to add NewConference for thespecified CiscoTelepresence ManagementSuite through Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredNew Conference isreplicated at CiscoTelepresence ManagementSuite Successfully
Add and validate NewConference for thespecified Cisco TMSusing InfrastructureConfiguration inBE7000-M
UCJ11.2S.CPC-PR.G.114
PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to view theSearch History for thespecifiedCisco ExpresswayEdge through Cisco PrimeCollaboration Provisioningin BE7000 MediumSuccessfully
View the Search Historyfor the specified CiscoExpressway Edge usingInfrastructureConfiguration inBE7000-M
UCJ11.2S.CPC-PR.G.115
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan258
Test Results SummaryCisco Prime Collaboration Provisioning
PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to view theLocal Zone for thespecifiedCisco ExpresswayEdge through Cisco PrimeCollaboration Provisioningin BE7000 MediumSuccessfully
View the Local Zone forthe specified CiscoExpressway Edge usingInfrastructureConfiguration inBE7000-M
UCJ11.2S.CPC-PR.G.116
PassedGo to Infrastructure Setup=> InfrastructureConfiguration and verifythat user is able to view theZones for the specifiedCisco Expressway Edgethrough Cisco PrimeCollaboration Provisioningin BE7000 Medium andverify whether configuredZones is replicated at CiscoExpressway EdgeSuccessfully
Add and validate Zonesfor the specified CiscoExpressway Edge usingInfrastructureConfiguration inBE7000-M
UCJ11.2S.CPC-PR.G.117
CSCuz72173FailedGo to User provisioningand verify that DND optionis getting saved for SXseries devices whilelauching self-care.
DND option should getsaved for SX seriesdevices
UCJ11.2S.CPC-PR.G.118
Related DocumentationCisco IP Phone 7800 Series
Release Notes:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7800-series/11-0-1/releasenotes/pa2d_b_cisco-ip-phone-7800-series.html
Cisco IP Phone 8800 Series
Release Notes:
www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/11-0-1/releasenotes/p881_b_cisco-ip-phone-8800-series.html
Cisco Unified IP Phone 8900 Series
Administration Guide:
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 259
Test Results SummaryRelated Documentation
www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8941_8945/9_0/english/admin_guide/P415_BK_C1A45FBB_00_admin-guide-8941-8945/P415_BK_C1A45FBB_00_admin-guide-8941-8945_chapter_010.html
Release Notes:
www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/9_4_2_SR2/english/releasenotes/P569_BK_IB15A550_00_ip_phone-8961_9951_9971-rn-942sr2firmware-release.html#CS38_TP_I38B1C80_00
Cisco Unified IP Phone 9900 Series
Administration Guide:
www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/9_0_1/english/admin_guide/P567_BK_A3A732A5_00_admin-guide-8961_9951_9971-9_0/P567_BK_A3A732A5_00_admin-guide-8961_9951_9971-9_0_chapter_010.html
Release Notes:
www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/9-4-2/P567_BK_8E92FC80_00_8961_9951_71-release-notes-9_4_2.html
Cisco Jabber for Mac
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_J06BEF2D_00_jabber-parameters-reference-guide-115/CJAB_BK_J06BEF2D_00_jabber-parameters-reference-guide-115_chapter_010.html#CJAB_RF_MEA9CDC7_00
User Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/mac/11_5/jabm_b_cisco-jabber-for-mac-UG-115.html#JABM_TP_CE289AB0_00
Release Notes:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/mac/11_6/jabm_b_release-notes-for-cisco-jabber.html
Cisco Jabber for iPhone
Installation Guide:
http://www.cisco.com/c/en/us/support/customer-collaboration/jabber-iphone-ipad/products-installation-guides-list.html
Jabber Planning Guide
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_C6FFF6D8_00_cisco-jabber-115-planning-guide.pdf
Cisco Jabber for iPad
http://www.cisco.com/c/en/us/support/customer-collaboration/jabber-iphone-ipad/products-installation-guides-list.html
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan260
Test Results SummaryRelated Documentation
Cisco Jabber for Android
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Android/11_6/RN/jaba_b_release-notes-for-cisco-jabber-for-android-11_6.html
Cisco Spark
Product Overview:
http://www.cisco.com/c/dam/en/us/products/collateral/conferencing/webex-meetings/product-overview-c78-734154.pdf
Cisco Spark for Windows - Release Notes:
https://support.ciscospark.com/customer/portal/articles/1966497-cisco-spark-for-windows---release-notes
Cisco Spark for Mac - Release Notes:
https://support.ciscospark.com/customer/portal/articles/2022796-cisco-spark-for-mac---release-notes
Cisco TelePresence Video Communication Server
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/admin_guide/Cisco-VCS-Administrator-Guide-X8-7.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-7.pdf
Deployment Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-7.pdf
Mobile and Remote Access Deployment Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-7/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-7.pdf
Cisco TelePresence System Integrator Package C90
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c90-and-codec-c90-administrator-guide-tc73.pdf
Collaboration Endpoint Software 8.0
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/ce8/release-notes/ce-software-release-notes-ce8.pdf
Cisco TelePresence SX80 Codec
Administration Guide:
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 261
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/sx80-administrator-guide-ce80.pdf
Cisco TelePresence SX10 Quick Set
User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/trc6-sx10-sx20-user-guide-ce80.pdf
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/sx10-administrator-guide-ce80.pdf
Cisco TelePresence SX20 Quick Set
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/sx20-administrator-guide-ce80.pdf
Cisco TelePresence MX300 G2 and MX200 G2
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce80/mx200g2-mx300g2-administrator-guide-ce80.pdf
Cisco Jabber Guest
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/ag/JABC_BK_C5AE0E46_00_cisco-jabber-guest-106-administration/JABC_BK_C5AE0E46_00_cisco-jabber-guest-106-administration_chapter_0111.html
Installation Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_6/icg/JABC_BK_JF2738FB_00_jabber-guest-server-106-installation.html
Cisco DX Series
Release Notes:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/rel-notes/1025/dx00_b_release-notes-dx-series-1025.html
Cisco DX650
User Guide:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/dx650/user/1025/DX65_BK_C569965D_00_cisco-dx650-user-guide-1025.html
Cisco DX70 and DX80
User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx70/user/1025/en/dx70-dx80-user-guide-1025.pdf
Administration Guide:
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan262
Test Results SummaryRelated Documentation
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1025/DX00_BK_CB112361_00_cisco-dx-series-ag-1025.html
Release Notes:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/rel-notes/1025/dx00_b_release-notes-dx-series-1025.html
Cisco TMS
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-2-1.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-15-2-1.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-15-2-1.pdf
Cisco TelePresence Conductor
Administration Guide:
http://www-author.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-2.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC4-2.pdf
Deployment Guides:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/config_guide/xc4-2_docs/TelePresence-Conductor-Clustering-Unified-CM-Deployment-Guide-XC4-2.pdf
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/config_guide/xc4-2_docs/TelePresence-Conductor-Clustering-Cisco-VCS-B2BUA-Deployment-Guide-XC4-2.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC4-2.pdf
Cisco TelePresence Server
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/admin_guide/Cisco-TelePresence-Server-Printable-Help-4-3-Virtual-Machine.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-3.pdf
Deployment Guide:
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 263
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-3.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-3-1-13.pdf
Cisco TelePresence Multipoint Control Unit
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/admin_guide/Cisco_Telepresence_MCU_5300_Series_4-4_Product_administration_guide.pdf
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_53x0_Installation_Guide.pdf
Deployment Guide:
http://www.cisco.com/c/en/us/support/docs/conferencing/telepresence-mcu-mse-8510/117626-configure-telepresence-00.html
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-45.pdf
Cisco TelePresence Content Server
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/admin/administration/tcs_7_1.html
Installation Guide:
http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/install/tcs-7-1-vm-install.html
Release Notes:
http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/7_1/release/notes/tcs-7-1-relnotes.html
CE Endpoints
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce81/sx10-administrator-guide-ce81.pdf
Release Notes:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/ce8/release-notes/ce-software-release-notes-ce8.pdf
Cisco TelePresence Conductor Endpoints
Administration Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc73.pdf
Release Notes:
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan264
Test Results SummaryRelated Documentation
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf
IX5000
Installation Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf
User Guide:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix_sw/8_x/user/guide/ix-8-1-ug.pdf
Administration Guide:
http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/admin/guide/ix_8_admin_guide.html
Release Notes:
http://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/release/notes/ix_release_notes.html
Cisco Prime Collaboration Provisioning
Release Notes:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-2/release/notes/Cisco_Prime_Collaboration_Provisioning_Release_Notes_11_2.pdf
Install and Upgrade Guide,11.x:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-2/provisioning/install_upgrade/guide/cpco_b_Cisco_Prime_Collaboration_Provisioning_Install_and_Upgrade_Guide_11_2.pdf
Standard and Advanced Guide,11.x:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-2/provisioning/guide/Cisco_Prime_Collaboration_Provisioning_Guide_11_2.pdf
CPC Assurance and Analytics 11.5
Install and Upgrade Guide,11.x:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/11-1/assurance/inst_upg/guide/cpco_b_Cisco_Prime_Collaboration_Assurance_and_Analytics_Install_and_Upgrade_Guide_11_1.pdf
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan 265
Test Results SummaryRelated Documentation
Test Results for Cisco Unified Communications Solution Release 11.5 for Japan266
Test Results SummaryRelated Documentation