Download - TOYOTA YARIS 3/5-DOOR LIFTBACK 2008- HANDS FREE BLU …toyotaparts.sparkstoyota.com/install/PT923-00111YarHB-inst.pdf · TOYOTA YARIS 3/5-DOOR LIFTBACK 2008- HANDS FREE BLU LOGIC

TOYOTA YARIS3/5-DOORLIFTBACK 2008- HANDSFREEBLULOGICPreparation

Page1of11IssueA:08/31/10

Item2 Item3 Item5Item4

Part#:PT923-00111 NOTE:Partnumberofthisaccessorymaynotbethesameasthepartnumbershown.

Conflicts:JBLAudio,FactoryNavigation

KitContents:Forkitsmanufacturedonorafter19D0,installationkitswillincludeBLULogicSwitchDecal.Themanufacturingdatecodeisonthepartlabelofthepackagingboxandisprintedas“DDMY”.”PleasenotethatthismanufacturingdateisperToyotastandardsandisintheformatofDAY-DAY-MONTH-YEAR.Example:“31L8”dateonlabelmeans“31st,December,2008”.

HardwareContent

Item# QuantityReqd. Description

1 1 InterfaceModule2 1 MainPowerHarness3 1 BLULogicSwitch4 1 SwitchExtensionCable5 1 Microphone6 15 9.5”LockTies7 2 AdhesiveFoamPad8 1 Owner’sManual9 33cm 1/4”WireSplitLoom10 1 BLULogicDecal

AdditionalItems(mayberequired)


RecommendedSequenceofApplication

Item# Accessory

VehicleServiceParts(mayberequiredforreassembly)


LegendSTOP:Damagetothevehiclemayoccur.Donotproceeduntilpro-cesshasbeencompliedwith.

CAUTION:Aprocessthatmustbecarefullyobservedinordertoreducetheriskofdamagetotheaccessory/vehicle.

OPERATORSAFETY:Usecautiontoavoidriskofinjury.

TOOLS&EQUIPMENT:UsedinFigurestocalloutthespecifictoolsandequipmentrecommendedfortheprocess.

REVISIONMARK:Thismarkhighlightsachangeininstallationwithrespecttopreviousissue.

SAFETYTORQUE:Thismarkindicatesthattorqueisrelatedtosafety.

VIDEO:VideoAvailable;clicktoPlay

Item9

RecommendedToolsPersonal&VehicleProtection Notes

SafetyGoggles

SeatCovers

FloorCovers

SpecialTools

PanelClipRemoval SST#00002-06001-01

Sockets 8,10mm,Extension

Screwdriver Phillips#2,Flathead

SideCutters

TorqueWrench 36in-lb(4.07N.m)

InstallationTools Notes

MaskingTape VDCSupplied

FoamTape VDCSupplied

SpecialChemicals Notes

Cleaner VDCApprovedCleaner

GeneralApplicability

Note:

Item10

Item1 Item6 Item8Item7



TableofContents

I. Preparation............................................................................................................................................... 1-21. TableOfContents..................................................................................................................................22. ContentLocation....................................................................................................................................3

II. Procedure................................................................................................................................................. 4-91. VehiclePreparation................................................................................................................................42. VehicleDisassembly..............................................................................................................................43. BLULogicSwitchInstallation..............................................................................................................64. MicrophoneInstallation.........................................................................................................................85. InterfaceModuleInstallation.................................................................................................................86. FinalizingtheInstallation......................................................................................................................97. ApplyBLULogicDecaltoSwitch......................................................................................................10

III.Checklist....................................................................................................................................................111. AccessoryFunctionChecks.................................................................................................................112. VehicleFunctionChecks......................................................................................................................11

AccessoryInstallationPractice(readbeforeinstallation)Caremustbetakenwheninstallingthisaccessorytoensuredamagedoesnotoccurtothevehicle.Theinstallationofthisaccessoryshouldfollowapprovedguidelinestoensureaqualityinstallation.

Theseguidelinescanbefoundinthe“AccessoryInstallationPractices”document.

Thisdocumentcoverssuchitemsas:• VehicleProtection(useofcoversandblankets,cleaningchemicals,etc.)• Safety(eyeprotection,checkingtorqueprocedure,etc.)• VehicleDisassembly/Reassembly(panelremoval,partstorage,etc.)• ElectricalComponentDisassembly/Reassembly(batterydisconnection,connectorremoval,etc.)

PleaseseeyourToyota/Scion/Lexusdealerforacopyofthisdocument.



ContentLocation

1 InterfaceModule2 WiredMicrophone3 BLULogicSwitchLocation

TOYOTA YARIS3/5-DOORLIFTBACK 2008- HANDSFREEBLULOGICProcedure


1. VehiclePreparation(Fig.1-1)

a. Applyparkingbrake.b. Protectfenderbeforestarting.c. Removethenegative(–)batterycable.

CAUTION:Donottouchthepositivetermi-nalwithanytoolduringremoval.d. Usingtheprotectiveblanket,coverfront

seat,sideoftheshiftleverandcenterconsole.

e. Placeremovedvehiclecomponentsonaprotectiveblanket.

Fig. 1-1

3.Usinghandsorappropriatepanelremovaltool,disengagetherightsidetrimgarnish(Fig.1-3).

4.Disconnectanyconnectorsandre-move.

NOTE:Ifusingpanelremovaltool,applyprotectivetapetothepryarea(s).

2. VehicleDisassembly

a. Removethecenterclustersidetrimgarnishes.

1.Usinghandsorappropriatepanelre-movaltool,disengagetheleftsidetrimgarnish(Fig.1-2).


NOTE:Ifusingpanelremovaltool,applyprotectivetapetothepryarea.

Socket(10mm),Ratchet

Fig. 1-3

Fig. 1-2

PanelRemovalTool

PanelRemovalTool



b. Removetheclusterbezel.

1.Usingyourhands,gentlypullontheleftandrightcornerofthebezeltodisengage.

2.Liftthefrontlipofthebezeluptodisengagethethree(3)locktabsandremovethebezel(Fig.1-4).

Fig. 1-4

d. RemovetheHVACassembly.

1.Usinghands,disengagetheHVACas-sembly(Fig.1-6).

2.MovetheHVACassemblyasideoruseotherappropriatemeanstopreventanydamagetotheconnectionsaswellaspreventingscratches.

NOTE:HVACassemblywascompletelyremovedforphotopurposesonly.DONOTDISCONNECTANYHVACCONNEC-TORS.

c. Removetheradiobezel.

1.Usinghands,disengagetheradiobezelandremove(Fig.1-5).

Fig. 1-5

Fig. 1-6



e. Removetheradioassembly.

1.Usingan8mmsocket/ratchetorPhil-lipsscrewdriver,removefour(4)boltssecuringtheradio(Fig.1-7).

2.Disconnectallconnectorsandsetaside.

NOTE:Becarefulnottoputtoomuchten-sionontheconnections.

Fig. 1-7

3.Usinghands,pulluponthefrontofthecenterfloorconsoletodislodge(Fig.1-9).


NOTE:Onvehiclesequippedwithamanualtransmission,theshiftknobmustbeun-screwedbeforethecenterfloorconsolecanberemoved.

5.MoveshiftlevertotheNeutralposi-tion.

3. BLULogicSwitchInstallation

a. Removecenterfloorconsole.

1.Removeclothinsertinthecupholder(Fig.1-8).

2.Usinga10mmsocket/ratchet,removetheboltunderneaththeclothinsert.

Fig. 1-8

Fig. 1-9

Socket(8mm),RatchetofPhillipsScrewdriver

Socket(10mm),Ratchet



b. Routeswitchcable(highlightedinor-ange).

1.Followingtheexistingwireloom,routetheswitchcableuptowardstheopen-ingoftheHVACcavity(Fig.1-10)

2.Leavea3-4inchpigtail(shifterside)thatwillconnecttotheswitchlater.

3.SecureswitchcabletoexistingwireloomwithwiretiescircledinFig.1-10.

4.Wiretieevery5-6inchesandcutoffexcesswireties.Fig. 1-10

3.Reinstallthecenterfloorconsole.

4.Connecttheswitchtothepigtailandreinstalltheswitchpanel(Fig.1-12).

c. MounttheBLULogicswitch.

1.Removetheswitchpanelonthecenterfloorconsolebydisengagingtheclipswithhand.

2.Removelowerleftblankknock-outandmounttheswitchwiththesolidar-rowpointingforward(Fig.1-11).

NOTE:Usenextavailableblankknock-outiflowerleftisoccupied.

Fig. 1-11

Fig. 1-12

SideCutters



SideCutters

SideCutters 4. MicrophoneInstallationa. Routethemicrophone(highlightedinblue).

1. Apply33cmof1/4”splitwireloomtothemicrophoneendofthecable.

2. Leaveaminimumof8mmofwireex-posed.Securewireloomwithtape.

3. RoutemicrophonetotherightoftheHVACairvents,downtowardstheradioopening(Fig.1-13).

4. FollowandsecuretoexistingwireloomwithtwowiretiescircledinFig.1-13.

NOTE:BLULogicwiretiesinFigure1-13andtheremainderoftheseinstructionswillbeshowninyellow.

Fig. 1-13

3.Mountmoduletothevehicle’sharnesshighlightedinorange(Fig.1-15).

5. InterfaceModuleInstallation

a. Mounttheinterfacemodule.

1. Insertthree(3)wiretiesthroughthemountingpointsontheinterfacemod-ule(Fig.1-14).

2.Connectthemainwireharness,micro-phoneandswitchwiretotheirrespec-tiveconnectionlocations.

NOTE:TheRedconnectorisconnectedtothematchingRedconnectoronthemodule.

DONOTremoveprotectivefoamwrapfrommodule.Fig. 1-14

Fig. 1-15

SideCutters



b. Routemainwireharness(highlightedinorange).

1.Routemainharnesstotheleftofthemoduleuptowardsthevehicle’sradioconnectors(Fig.1-16).

2.Connectthemainwireharnesstothevehicle’sradioconnectorsasneeded.

3.Bundleexcessmicrophoneharness(highlightedinblue)andsecureittothemainwireharness(circledinFig.1-16).

Fig. 1-16

6. FinalizetheInstallationa. Connectthemainwireharnesstothera-

dio’smatchingconnectionsasneeded.

NOTE:AVC-LAN(12pin)connectormaynotbepresentonthevehicle’sharness.Wiretiethisconnectortotheharnessunconnected,butALWAYSconnecttheAVC-LAN(12pin)con-nectorintotheradio.

IfAVC-LAN(12pin)connectorispresentonvehicleharness,connecttojumperprovidedwithBLULogicunit.b. Reinstalltheradio.

NOTE:Ifanyotheraccessoriesareinstalledthatconnecttotheheadunit,BLULogicshouldbetheunitthatplugsintotheradiofirst.c. ReinstallHVACassemblyandradiobezel.d. Mountthemicrophone.

1. CleantheclusterbezelwithVDCap-provedcleaner.

2.Mountthemicrophonetotheimmedi-ateleftofthefeaturelinemarkedbythearrow.Themicrophoneshouldbeaminimumof0-5mmfromthefeatureline.Aligntherearofthemicrophonewiththebackedgeofthetrimpaneltominimizetheamountofexposedwirevisibletothecustomer.0-8mmofexposedwireisac-ceptable(Fig.1-17).

e. Reinstallthebezelandsidetrimgarnishes.f. Positionnegativebatteryterminalatthe

originalfactoryposition(tightenthenutto36in-lbs(4.07N.m).

CAUTION:Donottouchthepositiveterminalwithanytoolduringinstallation.g. Placeowner’smanualintheglovebox.

Fig. 1-17

SideCutters



7. ApplyBLULogicdecaltoBLULogicswitch.(OnlykitsmanufacturedonorafterthedatecodeonthefrontpagewillincludetheBLULogicdecal).

a. RemovetheprotectivebackingontheroundportionoftheBLULogicsticker(Fig.1-18).

b. ApplyittothecenteroftheswitchsothatthestickerhangstowardstherightasshowninFig.1-19.

NOTE:Photoshownmaynotmatchtheswitchinstallationlocationforthisvehicleandisforillustrativepurposes.

Fig. 1-18

Fig. 1-19

TOYOTA YARIS3/5-DOORLIFTBACK 2008- HANDSFREEBLULOGICCHECKLIST–thesepointsMUSTbecheckedtoensureaqualityinstallation.


AccessoryFunctionChecks

Check: LookFor:

FactoryRadio TurnontheradioandverifythattheBLULogicModulewillmutetheaudio.Withtheradioon,pressthemiddlebuttonontheBLULogicswitchandverifythattheaudioismuted.

InterfaceKit

VerifytheproperconnectionoftheInterfacekitbypressingandholdingthemiddlebuttonontheswitchuntilyouhearone(1)beep.

NOTE:Pairingthemoduletoaphoneisnotrequired.Thisisthecustomers(ordealers)respon-sibility.

AudioOutput TurntheradiotoanAMorFMstationandthenturnthebalancetotheLandconfirmtheaudioiscomingfromtheleftfrontspeaker.Repeatfortherightfrontspeaker.

VehicleFunctionCheck

VehicleFunction VehicleFunctionDetail

AudioAM/FM VerifytheproperoperationofaudioAM/FM.

HazardSwitch Verifytheproperoperationofthehazardswitch.

HVAC Verifytheproperoperationoftheairconditioningsystem.

DoorLockSwitch Verifytheproperoperationofthedoorlockswitch.

NAVSystem(ifequipped) ConfirmnavigationoperationbyAVNdiagnostics.

SRSWarningLight ConfirmSRSwarninglightilluminatesforapproximately6secondswiththeignitionON,andthengoesout.

TirePressureMonitoringSystem(TPMS) Prior to TPMS activation and Pre- delivery Service (PDS) of the Vehicle the TPMS light will blink when IG is turned on.After TPMS activation and PDS of the Vehicle the TPMS light will illuminate for a few seconds and go off when IG is turned on.

KitServiceInformation

Item: Location:

1 3-Ampin-lineFuse Thefuseislocatedbehindtheradioassembly.Toreplace,fol-lowStep1through7toaccessthefuselocation.

NOTE:Ifthefuseisblown,theHandsFreeBLULogicwillnotturnon.

Makesureradioandinteriorlights(ifapplicable)areturnedoff.Installfuse(shortpin)forthefollowingfunctionchecks.

Turnoffallcomponentsincludingradioandinteriorlights.Removefuse(shortpin)afterfunctionchecksarecomplete.Checkwithyourdealer/porttofindoutifthisstepisrequired.