8/17/2019 Welding News 2016-II ENG Low
1/16
Welding − News2016 / 2
New website coming in March 2016www.demmeler.com
The new worktable lineDemmeler System D 22 Page 4
Original reversible clamping deviceDemmeler Rotatorix® Page 14
E R G O N O M I X ® M
M A N I P U L A T O R
D E M M E L E R
W O R K T A B L E S
C L A M P I N G P I P E S
A firm grip on everything roundThe company SELG Metallverarbeitung counts on Demmelerfor demanding tasks Read more on pages 2 – 3
Demmeler offers intelligent solutionsPages 2 – 3
Comparison of table linesPages 4 – 5
Demmeler manipulators Page 14
8/17/2019 Welding News 2016-II ENG Low
2/16
3D clamping system
Item no. D28-09015-000
• Eccentric setting via sliding plate
• Flexible angle adjustment from 90 to 180°
• Height secured with clamping bush
• Synchronous adjustment via toothing
• With threaded support tower
• For tube diameter up to 180 mm
• Double V-block for more possibilities
• Height adjustment via bearer sleevesfor arbor
Adjustment V-block V-block locations Screw clamp 45° with spindle
CLAMPING PIPESDEMMELER OFFERS INTELLIGENTSOLUTIONS
Item no. D28-09005-002
(stainless steel)
Item no. D28-09009-000
* Also available in steeland POM. More versionsat www.demmeler.com
Entire clamping mechanism
is exchangeable
Item no. D28-07009-000
90–180°
Precision and effi ciency in make- to-order and series production
The company Metallverarbeitung Pascal Selg
centrally located in Baienfurt near Ravensburg,
Germany is a certified specialist welding shop
according EN 1090-2. In a separate area, the
company processes all common materials from
stainless steel to aluminium alloys to steel in
all product forms. The focus is on the high-
quality processing and welding of componentsfor customers in plant construction, pharma-
ceuticals, the food industry and the bulk goods
industry as well as prototype construction,
series production and custom part fabrication.
Another of the company's production areas is
lightweight steel construction design and fabri-
cation ranging from balcony railings to staircases
produced in all facets. Flexibility and proximity
to the customer are very important for Selg. This
is reflected by everything from the implementa-
tion of plans using modern CAD software to the
company's own high production standards to close
contact with the customer.
Selg counts on the clamping systems and broad
range of accessories offered by Demmeler. They
guarantee that the tightest tolerances are met
thanks to their extreme dimensional accuracy.
2 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
3/16
Demmeler news
The company
Demmeler is represented at the leading industry
trade fairs. We present our innovations and are
happy to inform you about current products on site.
Our experts are happy to help you find the optimum
solution for your production needs. We are looking
forward to your visit!
Experience our productslive at trade fairs!
Adapter plate for flanges
TUBE in Düsseldorf
AUTOMATICAin Munich
EURO BLECHin HANOVER
AMB in Stuttgart
Pipe flanges can be quickly and precisely set
out on the hole circle and attached with the
D28-08001-00 quick release skewer. In addition,
D28 system bores serve to hold the clamping
elements of the system.
Item number D28-02006-000Incl. attachment bolts
4 – 8 April 2016
Hall 5, exhibitionstand E 02
Hall B6, exhibitionstand 119
Hall 6, exhibitionstand C 63
21 – 24 June 2016
25 – 29 October 2016
13 – 17 Sept. 2016
3Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
4/16
For everyday and large
welding construction
3D clamping system
Comparison of table lines
DEMMELER 3D WORKTABLES
EXTREME HARDNESS
UP TO 860 VICKERS
3D worktable
PROFIPremiumLINE (PP) 28
5 0
5 0
5050
3D worktable
PROFIPlusLINE (PL) 28
1 0
0
1 0
0
1 0
0
100
100 100
3D worktable
PROFIEcoLINE (PE) 28
1 0
0
1 0 0
10 0 10 0
HobbyLINE (H) 28 board
1 0
0
1 0
0
10 0 10 0
Table sizes
L in mm W in mm H in mm
1000 1000 200
1200 80 0 20 0
1200 1200 200
1500 1000 200
1500 1500 20 0
2000 1000 200
2000 2000 200
2400 1200 200
3000 1500 20 0
4000 2000 200
4800 2400 20 0
Customer
dimension**
Customer
dimension
Customer
dimension
** Custom dimensions and materialspossible by request!
Bore
Ø 28 mm
200 mm
THE NEW HARDNESS
DEMONT 860 MDEMONT 760 M
Systems
Systems
~25 mm
4 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
5/16
For delicateapplications
For light tomoderateapplications
Comparison of table lines
The company
3D worktable
PROFIPremiumLINE (PP) 22
5 0
5 0
5050
3D worktable
PROFIPlusLINE (PL) 22
1 0
0
1 0
0
1 0 0
100
10 0 100
Table sizes
L in mm W in mm H in mm
1000 1000 150
2000 1000 150
2400 1200 150
3000 1500 150
Customer
dimension**
Customer
dimension
Customer
dimension
** Custom dimensions and materialspossible by request!
Bore
Ø 16 mm
100 mm
~12 mm
~18 mm
3D worktable
PROFIPlusLINE (PL) 16
5
0
5
0
5
0
50
50 50
3D worktable
PROFIEcoLINE (PE) 16
5 0
5 0
50 50
L in mm W in mm H in mm
1000 50 0 100
1000 1000 100
1200 80 0 100
1200 1200 100
1500 1000 100
1500 1500 100
2000 1000 100
2400 1200 100
3000* 1500 100
Customer
dimension**
Customer
dimension
Customer
dimension
Table sizes
* Consisting of2 × 1500 × 1500 × 100
Systems
Systems
Systems
Bore
Ø 22 mm
150 mm
5Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
6/16
On request the table is also availablein a cast or stainless steel version!Different leg versions available byrequest.
Telescoping leg Heavy-duty wheel Anchoring leg
Pivoting foot with s turdyM 24 × 2 threaded spindle,fine adjustable ± 30 mm
Foot sleeve prevents pin-ching of the welding hoseand protects the threadedspindle against dirt.
Systems
5 0
5 0
50 50
Bore
Ø 16 mm
100 mm
1000 x 500 mm
1000 x 1000 mm
1200 x 800 mm
1500 x 1000 mm
1200 x 1200 mm
1500 x 1500 mm
2000 x 1000 mm
2400 x 1200 mm
3000 x 1500 mm*
PE16-01000-001
PE16-01001-001
PE16-11019-001
PE16-01017-001
PE16-01056-001
PE16-01011-001
PE16-01002-001
PE16-01003-001
PE16-01004-001
PE16-51000-710
PE16-51001-710
PE16-51019-710
PE16-51017-710
PE16-51056-710
PE16-51011-710
PE16-51002-710
PE16-51003-710
PE16-51004-710
PE16-51000-720
PE16-51001-720
PE16-51019-720
PE16-51017-720
PE16-51056-720
PE16-51011-720
PE16-51002-720
PE16-51003-720
PE16-51004-720
PE16-51000-730
PE16-51001-730
PE16-51019-730
PE16-51017-730
PE16-51056-730
PE16-51011-730
PE16-51002-730
PE16-51003-730
PE16-51004-730
Custom dimensions available by request!
W x H Set E 710 SET E 720 Set E 730
THE NEW HARDNESS
DEMONT 760 M
Hardness forsurcharge
Systems
3D clamping system
3D worktable
PROFIEcoLINE (PE) 162000 × 1000 mm with set E 710
Item no. PE16-51002-710
6 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
7/16
Item no. E16-52000-710 (29-piece) Item no. E16-52000-720 (79-piece) Item no. E16-52000-730 (114-piece)SET E 710 SET E 720 SET E 730
3D clamping system
3D worktable PROFIEcoLINE (PE) 16
Accessory cart D 16(accessories not included)Item no. D16-11001-002
Round brushItem no. D16-10002-0 00
4 4 E16-03008-000 ECO clamping and locating angle 140 × 90 × 25 mm
4 4 10 E16-03001-000 ECO clamping and locating angle 90 × 90 × 25 mm
2 4 4 E16-03001-002 ECO clamping and locating angle 90 × 37.5 × 25 mm
2 1 E16-03002-000 ECO clamping and locating angle R 200 × 137.5 × 50 mm
2 1 E16-03002-001 ECO clamping and locating angle L 200 × 137.5 × 50 mm
2 4 E16-05002-000 ECO universal stop small L55
4 4 12 E16-05001-000 ECO universal st op large L115
4 2 E16-09001-000 ECO spacer set 9 pieces
4 2 E16-05015-000 ECO displacement stop L150
4 E16-05003-000 ECO stop-strip 250 mm
2 2 E16-05003-001 ECO stop-strip 400 mm
4 8 8 E16-07005-000 ECO screw clamp 180° with spindle
2 8 8 E16-07009-000 ECO screw clamp 45° with spindle
4 8 E16-09003-000 ECO V-block locations Ø 80 mm
1 1 1 E16-10002-000 ECO round brush Ø 16 mm
1 1 1 E16-10007-000 ECO bench stone
1 1 1 E16-10008-000 ECO ball end hex wrench
4 E16-06003-000 ECO extension sleeve short
2 4 E16-06002-000 ECO clamping pin long
8 24 32 E16-06001-000 ECO clamping pin short
1 D16-11001-002 ECO accessory cart
E
7 1 0
E
7 2 0
E
7 3 0
EcoLine clamping pins can be replacedwith PC-clamping pins by request.
PC-clamping pin surcharge
Set E 710
Set E 720
Set E 730
E16-52000-711
E16-52000-721
E16-52000-731You can individually assemble or supplement your sets with t he large selection of Demmeler accesso-ries. Demmeler main catalogue at ww w.demmeler.com.
7Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
8/16
On request the table is also availablein a cast or stainless steel version!Different leg versions available byrequest.
Pivoting foot with s turdyM 30 × 2 threaded spindle,fine adjustable ± 30 mm
Foot sleeve prevents pin-ching of the welding hoseand protects the threadedspindle against dirt.
Systems
Systems
1 0 0
1 0 0
1 0 0
100
100 100
150 mm
Bore
Ø 22 mm
THE NEW HARDNESS
DEMONT 760 M
Hardness forsurcharge
Telescoping leg Heavy-duty wheel Anchoring leg
1000 x 1000 mm
2000 x 1000 mm
2400 x 1200 mm
3000 x 1500 mm
PL22-01001-001
PL22-01002-001
PL22-01003-001
PL22-01004-001
PL22-51001-710
PL22-51002-710
PL22-51003-710
PL22-51004-710
PL22-51001-720
PL22-51002-720
PL22-51003-720
PL22-51004-720
PL22-51001-730
PL22-51002-730
PL22-51003-730
PL22-51004-730
W x HSET D 710 SET D 720 SET D 730
Custom dimensions available by request!
3D clamping system
3D worktable
PROFIPlusLINE (PL) 222000 × 1000 mm with set D 710
Item no. PL22-51002-710
8 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
9/16
The “clever toolbox” (accessoriesnot included) can be mounted onall four sides and has a loadcapacity of up to 170 kg.
L × W × H: 980 mm × 780 mm × 520 mm.Saves space, saves time, protects tools and lockable. From a tablesize of 1000 × 1000 mm.
Item no. D22-11001-015
Item no. D22-52000-710 (28-piece) Item no. D22-52000-720 (57-piece) Item no. D22-52000-730 (81-piece)SET D 710 SET D 720 SET D 730
4 D 22 -0 6 02 6- 0 00 P PC bo lt l on g – Ø 22 , A F 1 0, c la mp in g r an ge 4 9. 5 –5 2. 5 m m
12 20 2 8 D 22 -0 6 02 5- 0 00 P PC bo lt sh or t – Ø 2 2, AF 10 , c la mp in g r an ge 31 –3 4 m m
6 8 D2 2- 06 00 9- 00 0 S top and pos it ioni ng bol t Ø 2 2 / 3 1 x 5 2 mm
2 2 D22-09001-005 Spacer set with thread – Ø 50 x 125 mm, height compensation 22−105 mm, continuous
2 2 D22-05013-000 Locat ing disk Ø 75 – stop dimension 25–50 mm, continuous
2 2 D22-09001-000 Spacer set 11 pieces – Ø 50 x 125 mm, height compensation 5-100 mm – increment 1 mm
4 4 4 D2 2-05015-00 0 Displacement stop – 100 x 50 x 18 mm, scale on both sides
4 4 D22-05001-000 Universal stop / large 225 x 50 x 18 mm
2 4 4 D22-05009-000 Universal stop L 300− 300 × 5 0 × 18 mm
2 2 D 22 -0 5 00 3 -0 0 0 S top -s tr ip L 5 0 0 – 50 0 × 10 0 × 25 mm
4 4 D 22 -0 70 09 -0 00 S wing clamp 4 5° w it h adjus ting scre w – ver tical t ube 17 5 mm
4 4 4 D22-07005-0 00 Swing clamp 180° with adjusting screw – ver tical tube 175 mm
4 6 D22-07001-000 Compensating swing clamp 180° with adjusting screw – vertical tube 300 mm
1 D22-10002-000 Round brush Ø 22 x 260 mm, with protective cap, for cleaning the system bores
1 1 1 D 22 -1 00 16 -0 01 E x tr ac ti on to ol – 2 50 x 4 0 m m, AF 10
1 1 D 00 -1 00 07 -0 0 0 B en ch s to ne 2 00 × 5 0 × 2 5 m m
1 P22-03002-002 Clamping and locating angle, right 225 x 250 mm
1 P22-03002-003 Clamping and locating angle, left 225 x 250 mm
1 P22-03003-002 Clamping and locating angle, right 500 x 325 mm
1 P22-03003-003 Clamping and locating angle, left 500 x 325 mm
D 7
1 0
D 7
2 0
D 7
3 0
3D clamping system
3D worktable PROFIPlusLINE (PL) 22
9Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
10/16
3D worktable
PROFIEcoLINE (PE) 282400 × 1200 mm with set E 710
Item no. PE28-51002-710
Telescoping leg Anchoring leg Holding frame Shifting foot Scissor lif tLeg for spacer blockHeavy-duty wheel
Pivoting foot with s turdyM 30 × 2 threaded spindle,fine adjustable ± 30 mm
Foot sleeve prevents pin-ching of the welding hoseand protects the threadedspindle against dirt.
Systems
Systems
THE NEW HARDNESS
DEMONT 860 M
DEMONT 760 M
Hardness forsurcharge
1 0 0
1 0 0
100 100
On request the table is also availablein a cast or stainless steel version!Different leg versions available byrequest.
200 mm
Bore
Ø 28 mm
1000 x 1000 mm
1200 x 800 mm
1500 x 1000 mm
1200 x 1200 mm
1500 x 1500 mm
2000 x 1000 mm
2000 x 2000 mm
2400 x 1200 mm
3000 x 1500 mm
400 0 x 2000 mm
4800 x 2400 mm
PE28-01001-001
PE28-11019-001
PE28-01011-001
PE28-01056-001
PE28-01031-001
PE28-01002-001
PE28-01006-001
PE28-01003-001
PE28-01004-001
PE28-01005-001
PE28-11085-001
PE28-51001-710
PE28-51019-710
PE28-51011-710
PE28-51056-710
PE28-51031-710
PE28-51002-710
PE28-51006-710
PE28-51003-710
PE28-51004-710
PE28-51005-710
PE28-51085-710
PE28-51001-720
PE28-51019-720
PE28-51011-720
PE28-51056-720
PE28-51031-720
PE28-51002-720
PE28-51006-720
PE28-51003-720
PE28-51004-720
PE28-51005-720
PE28-51085-720
PE28-51001-730
PE28-51019-730
PE28-51011-730
PE28-51056-730
PE28-51031-730
PE28-51002-730
PE28-51006-730
PE28-51003-730
PE28-51004-730
PE28-51005-730
PE28-51085-730
Custom dimensions available by request!
W x H SET E 710 SET E 720 SET E 730
3D clamping system
10 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
11/16
Item no. E28-52000-710 (32-piece) Item no. E28-52000-720 (52-piece) Item no. E28-52000-730 (74-piece)SET E 710 SET E 720 SET E 730
4 4 4 E28-03001-000 ECO clamping and locating angle 175 × 175 × 50 mm
1 1 E28-03002-000 ECO clamping and locating angle, right 300 x 275 mm
1 1 E28-03002-001 ECO clamping and locating angle, left 300 x 275 mm
1 E28-03003-002 ECO clamping and locating angle, right 600 x 275 x 80 mm
1 E28-03003-003 ECO clamping and locating angle, left 600 x 275 x 80 mm
2 4 E28-03008-000 ECO clamping and locating angle 275 × 175 × 50 mm
4 4 8 E28-05001-000 ECO universal stop / large 225 x 50 x 25 mm
2 2 2 E28-05002-000 ECO universal stop / small 100 x 50 x 25 mm
2 2 E 2 8-0 50 0 3-0 00 E CO stop -s tr ip L 5 0 0– 5 00 x 1 00 x 2 5 mm
2 E 2 8-0 50 0 3-0 01 E CO stop -s tr ip L 8 0 0– 8 00 x 1 00 x 2 5 mm
2 2 E 2 8-0 50 13 -00 0 E CO loc at in g d is k 2 5 -5 0 mm
2 2 2 E 2 8-0 50 13 -00 1 E CO loc at in g d is k 2 5 -7 5 mm
12 18 24 E 2 8-0 60 01-0 00 E CO clamping pin s ho rt Ec oL INE
6 8 10 E 2 8-0 70 0 5-0 00 E CO screw clamp 1 80 ° wi th s pind le
4 4 E 2 8-0 70 0 9-0 00 E CO screw clamp 4 5° wi th s pind le
4 E 2 8-0 90 0 3-0 00 E CO V-bloc k loca tion s Ø 58 mm
1 1 1 E28-10002-000 ECO round brush Ø 30 mm
1 1 1 E28-10008-000 ECO ball-head Allen key AF8
Accessory cart D28(accessories not included)Item no. D28-11001-000
ECO clamping pins can be replacedwith PPC-clamping pins by request.
PPC bolt surchargeSet E 710
Set E 720
Set E 730
E28-52000-712
E28-52000-722
E28-52000-732
ECO clamping pins can be replacedwith PC-clamping pins by request.
PC-bolt surchargeSet E 710
Set E 720
Set E 730
E28-52000-711
E28-52000-721
E28-52000-731
E
7 1 0
E
7 2 0
E
7 3 0
You can individually assemble or supplement your sets with t he large selection of Demmeler accesso-ries. Demmeler main catalogue at ww w.demmeler.com.
3D worktable PROFIEcoLINE (PE) 28
3D clamping system
11Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
12/16
Pivoting foot with s turdyM 30 × 2 threaded spindle,fine adjustable ± 30 mm
Foot sleeve prevents pin-ching of the welding hoseand protects the threadedspindle against dirt.
Systems
Systems
3D worktable
PROFIPlusLINE (PL) 283000 × 1500 mm with set D 710
Item no. PL28-51004-710
1
0 0
1 0 0
1 0 0
100
100 100
On request the table is also availablein a cast or stainless steel version!Different leg versions available byrequest.
200 mm
Bore
Ø 28 mm
3D clamping system
Telescoping leg Anchoring leg Holding frame Shifting foot Scissor lif tLeg for spacer blockHeavy-duty wheel
THE NEW HARDNESS
DEMONT 860 M
DEMONT 760 M
Hardness forsurcharge
1000 x 1000 mm
1200 x 800 mm
1500 x 1000 mm
1200 x 1200 mm
1500 x 1500 mm
2000 x 1000 mm
2000 x 2000 mm
2400 x 1200 mm
3000 x 1500 mm
4000 x 2000 mm
4800 x 2400 mm
PL28-01001-001
PL28-11019-001
PL28-01011-001
PL28-01056-001
PL28-01031-001
PL28-01002-001
PL28-01006-001
PL28-01003-001
PL28-01004-001
PL28-01005-001
PL28-11085-001
PL28-51001-710
PL28-51019-710
PL28-51011-710
PL28-51056-710
PL28-51031-710
PL28-51002-710
PL28-51006-710
PL28-51003-710
PL28-51004-710
PL28-51005-710
PL28-51085-710
PL28-51001-720
PL28-51019-720
PL28-51011-720
PL28-51056-720
PL28-51031-720
PL28-51002-720
PL28-51006-720
PL28-51003-720
PL28-51004-720
PL28-51005-720
PL28-51085-720
PL28-51001-730
PL28-51019-730
PL28-51011-730
PL28-51056-730
PL28-51031-730
PL28-51002-730
PL28-51006-730
PL28-51003-730
PL28-51004-730
PL28-51005-730
PL28-51085-730
SET D 710 SET D 720 SET D 730
Custom dimensions available by request!
W x H
12 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
13/16
Item no. D28-52000-720 (81-piece)SET D 720
Item no. D28-52000-730 (120-piece)SET D 730
Item no. D28-52000-710 (44-piece)SET D 710
3D worktable PROFIPlusLINE (PL) 28
3D clamping system
4 4 4 D28-03001-000 Clamping and locating angle 175 × 175 × 50 mm
2 4 D28-03001-005 Clamping and locating angle 175 × 75 × 50 mm
2 1 D28-03002-000 Clamping and locating angle, r ight 300 x 275 mm
2 1 D28-03002-001 Clamping and locating angle, left 300 x 275 mm
1 D28-03003-000 Clamping and locating angle, r ight 600 x 375 mm
1 D28-03003-001 Clamping and locating angle, left 600 x 375 mm
2 2 4 D28-03008-000 Clamping and locating angle 275 × 175 × 50 mm
4 2 4 D28-05001-000 Universal stop / large 225 x 50 x 25 mm
4 2 D28 -05 0 03 -00 0 Sto p-strip L 50 0 – 50 0 x 1 00 x 2 5 mm
2 D28 -05 0 03 -00 1 Sto p-strip L 80 0 – 80 0 x 10 0 x 25 mm
2 4 4 D28 -05 0 09 -00 0 Unive rs al stop L 3 0 0– 3 00 x 5 0 x 2 5 mm
2 D 28 -0 50 13 -0 00 L oca ti ng di sk 25 –5 0 mm
2 2 D 28 -0 50 13 -0 01 L oca ti ng di sk 25 –7 5 m m
2 D28 -05 01 3-01 0 Ang le -s et t in g template
4 4 4 D28-05015-000 Displacement stop 150 × 50 × 25 mm
12 20 24 D28 -06 0 01 -0 0 0 PC-clamping p in / s ho rt
2 D28-06002-000 PC-clamping pin / long
6 10 12 D28-06009-000 Stop and positioning bolt Ø 28
2 2 D28-07001-000 Compensating swing clamp 150 mm wit h spindle
4 2 2 D28-07002-000 Compensating swing clamp 200 mm with spindle
4 4 D28-07005-000 Screw clamp 180° with spindle
4 4 D28-07005-014 Screw clamp 180° with spindle, clamping tube 350 mm long
4 D28-07005-015 Screw clamp 180° with quick-action clamping cylinder
2 4 D28-07008-000 Swing clamp 90° with adjusting screw
4 4 4 D28-07009-000 Swing clamp 45° wit h adjusting screw
4 D28-07009-011 Swing clamp 45° wit h adjusting screw, clamping tube 350 mm
2 2 D28-09001-000 Spacer set 11 pieces Ø 50
2 D28-09001-005 Spacer set with thread Ø 50
8 D28-09003-000 V-block locations blackened steel Ø 58 mm
1 1 1 D28-10002-000 Round brush Ø 28
1 1 D00-10007-000 Bench stone
1 D00-10009-000 Ground connector D 16 / D 28
1 1 1 D00-10016-001 Lift er fork – 250 × 40 mm, AF 14
D 7
1 0
D 7
2 0
D 7
3 0
You can individually assemble or supplement your sets with the large selection of Demmeleraccessories. Demmeler main catalogue at www.demmeler.com.
PPC-clamping pin surcharge
Set D710
Set D720
Set D730
D28-52000-711
D28-52000-721
D28-52000-731
13Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
14/16
Demmeler manipulators
3D clamping system
Lifting
T u r n i n g
Turning
ROBOTIX® LP
ROBOTIX® LM
Tipping
Turning
Lifting
ERGONOMIX®M 2000CONSISTENTLY IDEAL POSITION IN ALL
DEGREES OF FREEDOM
Exact positioning• Enables positioning of work pieces
with very high precision
• and repeat accuracy• Suitable for integration in a robot
cell
Tilting up to 180°
Demmeler Ergonomix® M:Winner of the 2011 German federal prizefor innovative performance in the trade.
Standard product series:Load capacity 2,00 0–25, 000 kg
ERGONOMIX®
M 2000 / V 2500
Item no.: M02-02000-0 07
They relieve workers of heavy hand-
ling tasks and enable working with an
ergonomic posture. Welding processes
can be carried out with less fatigue and
consistently high precision. Excessive
strain and missed time due to illness are
prevented as well.
14 Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
15/16
3D clamping system
PPC bolt
With the Demmeler PPC clamping pin, a 100x larger
supporting surface is achieved. This permits a muchhigher contact pressure, therefore securing work pieces
more reliably.
Item no. D28-06025-020
• Usable on both sides
• Dimension adjustment using grid lines on3D worktable possible
• Compatible with all clamping and locating angles
• Precision scaling on both sides• Hardened casting (DEMONT 760 M)
Item no. PE28-03001-001
Clamping and locating angle 175 × 175 × 50 mm
Sets customised for you
Cordless powerscrewdriver set
Item no. D28-13050-000
1 × cordless screwdriver including chargerand 2 × batteries
1 × round brush attachment ø 281 × twin quick-coupling1 × socket adapter 14 AF to 13 AF1 × cleaning plate ø 125
1 × case
ProfiEcoLine Clamping and locating anglecasting 600/800
The Eco series. Reduced to the essentials, yettremendously flexible. Designed for all common stopand clamping applications with system bores in a
size 50 grid and three usable stop faces, yet trulyaffordable. Solutions for anyone who simply does notneed more.
600 right Item no. E28-03003-002600 left Item no. E28-03003-003
800 right Item no. E28-03004-002
800 left Item no. E28-03004-003
Clamping and locating anglealuminium-titanium 300
Set consisting of 1 × left and 1 × right, aluminium-titanium alloy resulting in approx. 60 % weight
reduction and approx. 10% higher bending strengthcompared to cast iron, very easy to handle, in kidneyshape, also permits application with continuously
variable angle settings.
Item no. P28-03002-006
1 × right 1 × left
• Extended face plate with two bores in the
face plate• Extended mounting plate with oblong hole
150 – therefore moveable on 50 mm grid
• Precision scaling on both sides• Hardened (DEMONT 760 M)
Item no. PL28-03001-019
Clamping and locating angle 225 × 200 × 50 mm
Clamping and locating angle250 x 300 x 50 mm aluminium-titanium
• Extended face plate with two bores in the
face plate• Exte nded mounting plate with oblong hole 150
– therefore moveable on 50 mm grid• Optimum strength thanks to the brace
Item no. PL28-03001-019
Optimised stiffness though
highly modern finite elementcalculation
PPC bolt
ECO-bolt
PC-bolt
Patented
System
System
System
System System
System
15Demmeler Maschinenbau
8/17/2019 Welding News 2016-II ENG Low
16/16
Demmeler Maschinenbau GmbH & Co. KG
Alpenstraße 10, 87751 Heimertingen / Germany
Telephone: + 49 (0) 83 35 98 59-0
Fax: + 49 (0) 83 35 98 59-27
E-mail: [email protected]
Internet: www.demmeler.com
Your authorised distribution partner:
Company brochure
Contract manufacturingup to 100 tons unit
weight
CNC rotary tables Tool change systems
Tool arena
Manipulators
Pay us a visit!
Order form Fax: 0 83 35 98 59-27
Quantity Item no. Item designation Unit price Total price
“Original 3D Clamping Systems andWorktables” Our main catalogue offers a complete overview of our
comprehensive product range with numerous interestingapplication examples.
Please send me the main catalogue
Your address / company stamp / signature