A 4395 500W Public Address Mixer Amplifier

Post on 15-Apr-2017

1,849 views 1 download

transcript

Redback Public Address Products

A 4395 500W Mixer Amplifier

®

Overview

•The first multi-source 500 Watt amplifier made by Redback.

• Ideal for use in installations with long strings of 100V line speakers such as shopping malls, public transport facilities & convention centres.

Benefits

•Two audio inputs for an all-in-one amplification & music source solution.

•Music input on front panel for direct connection to portable devices.

•Low noise & distortion amplifier.

•Design incorporates latest MOSFET technology

Product Support

•Designed & manufactured in Australia.

•Backed by a comprehensive 10 year warranty.

•Excellent product support & backup from a local manufacturer with over 35 years experience in public address systems.

Special Features

•VOX circuit: With front panel sensitivity adjustment, allows input 1 to mute input 2. This allows a microphone to override the background music source when announcements are made.

•Phantom Power: 15V DC phantom power is available on microphone 1 (3 pin XLR)

Special Features

•24V DC Battery Backup Mode: The amplifier can run from a 24V DC backup power system for use during mains power failure.

•24V DC Output: A 1A 24V DC output is provided for powering ancillary devices.

Front Panel Controls

Volume 1

Music input

Treble & Bass

Volume 2 Signal Status LEDs

Fault Status LEDs

Power Status LEDs

Rear Panel Connections

Backup battery charging circuit

100V, 70V, 4-16 Ohm

Output

24V DC Out

24V DC In

Input 2

Input Options

Input 1

Proudly manufactured in Australia by

Altronic Distributors Pty. Ltd.

For more information, including full operating

manual, visit www.altronics.com.au