Alloy Composition Details Alloys:

EN AW-1050A

Fe <= 0.40Si <= 0.25Zn <= 0.07Ti <= 0.05Mg <= 0.05Mn <= 0.05Cu <= 0.05Other Elem <= 0.03Al <= 99.50

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-1200

Si+Fe <= 1.0Total Other <= 0.15Zn <= 0.10Other Elem <= 0.05Ti <= 0.05Mn <= 0.05Cu <= 0.05Al >= 99.00

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-2007

Cu 3.3 - 4.6Mg 0.40 - 1.8Pb 0.8 - 1.5Mn 0.50 - 1.0Zn <= 0.8Fe <= 0.8Si <= 0.8Total Other <= 0.30Ti <= 0.20Sn <= 0.20Bi <= 0.20Ni <= 0.20Other Elem <= 0.10Cr <= 0.10

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-2011

Cu 5.0 - 6.0Fe <= 0.7Pb 0.20 - 0.6Bi 0.20 - 0.6Si <= 0.40Zn <= 0.30Total Other <= 0.15Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-2014

Cu 3.9 - 5.0Mn 0.40 - 1.2Si 0.50 - 1.2Mg 0.20 - 0.8Fe <= 0.7Zn <= 0.25Zr+Ti <= 0.20Total Other <= 0.15Ti <= 0.15Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

A Zr+Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.

 

 

Alloy Composition Details Alloys:

EN AW-2014A

Cu 3.9 - 5.0Mn 0.40 - 1.2Si 0.50 - 0.9Mg 0.20 - 0.8Fe <= 0.50Zn <= 0.25Zr+Ti <= 0.20Total Other <= 0.15Ti <= 0.15Ni <= 0.10Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-2017A

Cu 3.5 - 4.5Mg 0.40 - 1.0Mn 0.40 - 1.0Si 0.20 - 0.8Fe <= 0.7Zr+Ti <= 0.25Zn <= 0.25Total Other <= 0.15Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-2024

Cu 3.8 - 4.9Mg 1.2 - 1.8Mn 0.30 - 0.9Fe <= 0.50Si <= 0.50Zn <= 0.25Zr+Ti <= 0.20Total Other <= 0.15Ti <= 0.15Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

A Zr+Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.

 

 

Alloy Composition Details

Alloys: EN AW-2030 Cu 3.3 - 4.5Pb 0.8 - 1.5Mg 0.50 - 1.3Mn 0.20 - 1.0Si <= 0.8Fe <= 0.7Zn <= 0.50Total Other <= 0.30Ti <= 0.20Bi <= 0.20Other Elem <= 0.10Cr <= 0.10

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-3003

Mn 1.0 - 1.5Fe <= 0.7Si <= 0.6Cu 0.05 -0.20Total Other <= 0.15Zn <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-3004

Mn 1.0 - 1.5Mg 0.8 - 1.3Fe <= 0.7Si <= 0.30Zn <= 0.25Cu <= 0.25Total Other <= 0.15Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-3005

Mn 1.0 - 1.5Fe <= 0.7Mg 0.20 - 0.6Si <= 0.6Cu <= 0.30Zn <= 0.25Total Other <= 0.15Ti <= 0.10Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-3103

Mn 0.9 - 1.5Fe <= 0.7Si <= 0.50Mg <= 0.30Zn <= 0.20Total Other <= 0.15Zr+Ti <= 0.10Cr <= 0.10Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-3105

Mg 0.20 - 0.8Mn 0.30 - 0.8Fe <= 0.7Si <= 0.6Zn <= 0.40Cu <= 0.30Cr <= 0.20Total Other <= 0.15Ti <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5005

Mg 0.50 - 1.1Fe <= 0.7Si <= 0.30Zn <= 0.25Mn <= 0.20Cu <= 0.20Total Other <= 0.15Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5005A

Mg 0.7 - 1.1Fe <= 0.45Si <= 0.30Zn <= 0.20Total Other <= 0.15Mn <= 0.15Cr <= 0.10Other Elem <= 0.05Cu <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5049

Mg 1.6 - 2.5Mn 0.5 - 1.1Fe <= 0.50Si <= 0.40Cr <= 0.30Zn <= 0.20Total Other <= 0.15Ti <= 0.1Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5052

Mg 2.2 - 2.8Fe <= 0.40Cr 0.15 -0.35Si <= 0.25Total Other <= 0.15Zn <= 0.10Mn <= 0.10Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5083

Mg 4.0 - 4.9Mn 0.40 - 1.0Fe <= 0.40Si <= 0.40Zn <= 0.25Cr 0.05 -0.25Total Other <= 0.15Ti <= 0.15Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5086

Mg 3.5 - 4.5Mn 0.20 - 0.7Fe <= 0.50Si <= 0.40Zn <= 0.25Cr 0.05 -0.25Total Other <= 0.15Ti <= 0.15Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5154A

Mg 3.1 - 3.9Mn+Cr 0.10 -0.50Mn <= 0.50Fe <= 0.50Si <= 0.50Cr <= 0.25Ti <= 0.20Zn <= 0.20Total Other <= 0.15Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

0.0008 max Be for welding electrode and filler wire only.

 

 

Alloy Composition Details

Alloys: EN AW-5182 Mg 4.0 - 5.0Mn 0.20 -0.50Fe <= 0.35Zn <= 0.25Si <= 0.20Total Other <= 0.15Cu <= 0.15Ti <= 0.10Cr <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5251

Mg 1.7 - 2.4Mn 0.10 -0.50Fe <= 0.50Si <= 0.40Total Other <= 0.15Ti <= 0.15Zn <= 0.15Cr <= 0.15Cu <= 0.15Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5454

Mg 2.4 - 3.0Mn 0.50 - 1.0Fe <= 0.40Zn <= 0.25Si <= 0.25Ti <= 0.20Cr 0.05 -0.20Total Other <= 0.15Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-5754

Mg 2.6 - 3.6Mn+Cr 0.10 - 0.6Mn <= 0.50Fe <= 0.40Si <= 0.40Cr <= 0.30Zn <= 0.20Total Other <= 0.15Ti <= 0.15Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6005A

Si 0.50 - 0.9Mg 0.40 - 0.7Mn+Cr 0.12 -0.50Mn <= 0.50Fe <= 0.35Cr <= 0.30Cu <= 0.30Zn <= 0.20Total Other <= 0.15Ti <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6016

Si 1.0 - 1.5Mg 0.25 - 0.6Fe <= 0.50Zn <= 0.20Mn <= 0.20Cu <= 0.20Total Other <= 0.15Ti <= 0.15Cr <= 0.1Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6060

Mg 0.35 - 0.6Si 0.30 - 0.6Fe 0.10 -0.30Total Other <= 0.15Zn <= 0.15Ti <= 0.10Mn <= 0.10Cu <= 0.10Other Elem <= 0.05Cr <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6061

Mg 0.8 - 1.2Si 0.40 - 0.8Fe <= 0.7Cu 0.15 -0.40Cr 0.04 -0.35Zn <= 0.25Total Other <= 0.15Ti <= 0.15Mn <= 0.15Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6063

Mg 0.45 - 0.9Si 0.20 - 0.6Fe <= 0.35Total Other <= 0.15Ti <= 0.10Zn <= 0.10Cr <= 0.10Mn <= 0.10Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6082

Si 0.7 - 1.3Mg 0.6 - 1.2Mn 0.40 - 1.0Fe <= 0.50Cr <= 0.25Zn <= 0.20Total Other <= 0.15Ti <= 0.10Cu <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-6106

Mg 0.40 - 0.8Si 0.30 - 0.6Fe <= 0.35Cu <= 0.25Cr <= 0.20Mn 0.05 -0.20Total Other <= 0.15Zn <= 0.15Ti <= 0.10Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-7010

Zn 5.7 - 6.7Mg 2.1 - 2.6Cu 1.5 - 2.0Zr 0.10 -0.16Total Other <= 0.15Fe <= 0.15Si <= 0.12Mn <= 0.10Ti <= 0.06Other Elem <= 0.05Ni <= 0.05Cr <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-7020

Zn 4.0 - 5.0Mg 1.0 - 1.4Mn 0.05 -0.50Fe <= 0.40Cr 0.10 -0.35Si <= 0.35Zr+Ti 0.08 -0.25Zr 0.08 -0.20Cu <= 0.20Total Other <= 0.15Other Elem <= 0.05

Al Remainder

All compositions in wt%.

 

 

Alloy Composition Details Alloys:

EN AW-7075

Zn 5.1 - 6.1Mg 2.1 - 2.9Cu 1.2 - 2.0Fe <= 0.50Si <= 0.40Mn <= 0.30Cr 0.18 -0.28Zr+Ti <= 0.25Ti <= 0.20Total Other <= 0.15Other Elem <= 0.05

Al Remainder

All compositions in wt%.

A Zr+Ti limit of 0.20 percent maximum may be used with this alloy designation for extruded and forged products only, but only when the supplier or producer and the purchaser have mutually so agreed. Agreement may be indicated, for example, by reference to a standard, by letter, by order note, or other means which allow the Zr + Ti limit.