Post on 13-Apr-2018
transcript
7/26/2019 Brochure en 2014
http://slidepdf.com/reader/full/brochure-en-2014 1/2
WWW.NOYFAR.IT
NOYFAR S.r.l.
Strada Nazionale Cisa 62, 38/C46029 Suzzara (MN) - Italy
Tel: + 39 (0376) 520189Fax + 39 (0376) 591634
noyfarcylinderfacebook.com/noyfar
info@noyfar.itwww.noyfat.it
QUALITY
NOYFAR ISO 9001 CERTIFIED COMPANY, WORK-
ING IN FULL COMPLIANCE WITH ALL THE DI-
RECTIVES OF THE ISO 9001 RULES SUBMITTING
THEIR PRODUCTS A RIGID QUALITY CONTROL
Thesalttest results,roughnessand hardnessare
evaluated by CertifiedLaboratories.The painting
cyclefeaturesfollowing customer’s preferencesor
theRAL rangeof colour.All thetubesarecleaned
beforeassemblingthe cylinder.Allweldingopera-
tionson tubesandrodsare carriedout incompli-
ancewithUNIENISO3834standards.Allcylinders
aretested followingQuality ManagementSystem.
Allthe materialissupplied withQuality Certificates.
WASHING SYSTEMAll cylindersare cleaned following the NASscale;
the minimumlevel isNAS9.
WELDINGThe welderare certificated asrequested by ISO.
PAINTINGThe goodscanbe supplied inthe RAL colourorin
theirownColour.
7/26/2019 Brochure en 2014
http://slidepdf.com/reader/full/brochure-en-2014 2/2
ICE CYL IS A CYLINDER USED BY MANUFACTURERS
OF MACHINES WHICH WORK INTO THE COOLER
ENVIRONMENT WITH THE LOWER TEMPERATURE.
ICE CYL isassembled witha special sealingkit called
"Artico" whichallows the cylinderto operate up totemperaturesas -50° C. Itguaranteesthe rightop-
eration and a longservice life especially whenit is
subjected to sudden changes in temperature and
humidity levelshigh. The bronze wiperremoves and
destroysall the ice lyingon the pistonrod.
The stainlesssteel materials and Marine CoatingCy-
cle allow to delete any causes ofdamage even ifthe
cylinder is subjected to highly corrosive agents. ICE
CYL hasthe highestquality standardson the market.
All cylinders can be quickly converted into ICE CYL
withoutchanging any external dimensions, sizesand
the stroke.
FEATURES
SEAL Kit “Artico”
R OD MAT E RI AL Ai si 3 04 / 31 6/ 3 29 / 43 1
T UB E MA TE RI AL E 35 5 E N 1 03 05
PAINTING Marine Cycle
THE SENSOR CYL SERIES ALLOWS THE “EARTH
MOVING MACHINES” MANUFACTURES TO USE A
PARTICULAR CYLINDER THAT ALLOWS TO CHECK
THE POSITION INSTANTLY.
Thiss implifiesvarious machineswhere the parallel-
ismcontrol of a structure and the end ofstroke con-trol are fundamental. These systemsare mainly used
onaerial platformsand onforklifting systems; they
canalso be used insteeringsystemsof machines
that need to adapttheir balance to the ground dur-
ingapplication asin the agricultural sector. The digital
systemallows carryingoutthe testsboth inthe man-
ual and automatic modalities.
FEATURES
RESOLUTION ± 0.1 mm
LINEARITY < ± 0.04 F.S.
ELECTRICWORKINGSTROKE
50 mm–2500 mm
T EM PE RA TU RE f ro m -3 0° C to +9 0° C
ELECTRICCONNECTION 4-wire (optional M12 connector)
FEED 12/24 Vdc (4...20mA)
W ORK I NG PR ESSUR E 4 50 b a r
VIBRATION 25g
SHOCK 100g
EMC UP TO 200 V/m
I NT ER FA CE A na lo gi ca l, P WM , CA No pe n, J 19 39
SAFETY INTEGRATIONLEVEL 2
Available incertified versionSIL2accordingto IEC 61508 standard
AISI CYL LINE HAS BEEN DEVELOPED TO SATIS-
FY THE MOST DEMANDING REQUESTS IN PAR-
TICULARLY AGGRESSIVE FIELDS OF APPLICATION
WHERE CLIMATIC EXTERNAL AGENTS COMPRO-
MISE THE DURATION OF STANDARD HYDRAULIC
CYLINDERS.
A severe final testingreproduces the normal work-
ingconditionsof cylindersand the care takeninthe
choice ofmaterialsand seals used provide maximum
technology inthe field which the hydraulic cylinder
are required reliable and resistantto any type ofwear.
FEATURES
R OD MATE R IAL AI SI 3 04 / 31 6/ 3 29 / 43 1
T U BE MATE R IAL AI SI 3 04 / 31 6/ 3 29 / 43 1
PAINTING Marine Cycle
SUZZARA CYL LINE ENSURES A GOOD FIT, WHICH
ALWAYS ALLOWS A PERFECT WORKING POSITION.
The productsare available indifferentclasses tailored
to the differentneeds ofagricultural businesses. Thetechnology used inthe line SUZZARACYL isbased
on a double-acting cylinder complete with special
bottomwith double valve integrated thatprevents
any impacttransferred from the hydraulic system
of the tractor, and maintains the ideal performance
even duringextended periods of inactivity. Through
the systemofintegrated valve onspecial bottomthis
systemassures the best powerand flexibility witha
more compactsize.
FEATURES
P UL LI NG F OR CE p =3 00 ba r F= 20 0k N
P US HI NG F OR CE p =3 00 ba r F= 15 0k N
S AF ETY FAC TO R S= 3