Post on 14-Apr-2018
transcript
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 1/11
© 2012 ANSYS, Inc. December 17, 2012 1
14.5 Release
Lecture 01:
Introduction
Introduction to ANSYS CFX
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 2/11
© 2012 ANSYS, Inc. December 17, 2012 2
Agenda: Day 1
Welcome to the ANSYS CFX introductory training course!
This training course covers the basics of using ANSYS CFX for performing a range of Computational Fluid Dynamic (CFD) analyses.
It is intended for all new or occasional ANSYS CFX users
Course Contents:
– General understanding of the CFD process, and use of the CFX interface
–Setting up a CFD simulation (materials, boundary conditions etc.)
– Ensuring flow accuracy
– Accounting for Turbulence and Heat Transfer
– Postprocessing
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 3/11
© 2012 ANSYS, Inc. December 17, 2012 3
Agenda: Day 1
Morning Lecture 1 – Introduction
Lecture 2 – Introduction to Workbench
Lecture 3 – Introduction to CFD Methodology
Workshop 1 – Mixing Tee
Lecture 4 – Domains, Boundary Conditions and Sources
Workshop 2 – Mixing Tee with Particles or
Workshop 3 – Mixing Tube (profile boundary condition)
Afternoon Lecture 5 – Post-processing
Workshop 4 – Post-processing
Lecture 6 – Solver Settings & .out file
Workshop 5 – Airfoil
Lecture 7 – Summary/Review of Day
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 4/11
© 2012 ANSYS, Inc. December 17, 2012 4
Agenda: Day 2
Morning Lecture 8 – Interfaces and Moving Zones
Workshop 6 – Axial Fan Stage or
Workshop 7 – Centrifugal Pump
Lecture 9 – Heat Transfer
Workshop 8 – Electronics Cooling
Lecture 10 – Turbulence Modelling
Afternoon Lecture 11 – Transient Simulations
Workshop 9 – Tank Flush
Lecture 12 – Best Practices for CFD
Workshop 10 – Vortex Shedding
Lecture 13 – CEL, CCL and Additional Variables
Lecture 14 – Summary/Review of Day
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 5/11
© 2012 ANSYS, Inc. December 17, 2012 5
More than 60 offices worldwide plus an extensive network of distributors
Over 2,200 direct employees of ANSYS and its subsidiaries worldwide
Listed on NASDAQ (ANSS)
Visit www.ansys.com for more information
About ANSYS, Inc.
Corporate HeadquartersCanonsburg, PA
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 6/11
© 2012 ANSYS, Inc. December 17, 2012 6
Breadth of Technologies
Structural Mechanics:
From Linear Statics
Fluid Mechanics:From Single-Phase Flows
Electromagnetics:
From Low-Frequency
Windings
Systems:
From Data Sharing
To High-Speed Impact
To Multiphase
Combustion
To High-Frequency
Field Analysis
To Multi-Domain
System Analysis
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 7/11© 2012 ANSYS, Inc. December 17, 2012 7
Index and store CAE files automatically
Find and reuse past CAE files efficiently
Trace and audit simulation decisions
Breadth of TechnologiesANSYS EKM - Engineering Knowledge Manager
ANSYS Engineering Knowledge Manager (EKM) is a multi-user collaborative
solution that is aimed at meeting the Simulation Process and Data Managementchallenges
Use Case:
Knowledge Retention and ReuseSimulation focused search and retrieval
Automated CAE reports
Remote CAE visualization
EKM capabilities
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 8/11© 2012 ANSYS, Inc. December 17, 2012 8
Build and run CAE workflows
Allow multi site, multi user access
Deploy templates for what if studies
Breadth of TechnologiesANSYS EKM - Engineering Knowledge Manager
Use Case: Collaboration
Workflow Modeling
Process Tracking
Hosted Applications
EKM capabilities
ANSYS Engineering Knowledge Manager (EKM) is a multi-user collaborative
solution that is aimed at meeting the Simulation Process and Data Managementchallenges
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 9/11© 2012 ANSYS, Inc. December 17, 2012 9
The ANSYS Customer Portal
Contains over 50,000 support assets powered by a modern web user
interface and powerful search engine.
Support Products DownloadsKnowledge
Resources
Classroom Training
Webinars
Service Requests
Product Assets Latest Release
Updates
Tools
Previous Release(s)
Solutions
Conference Proceedings
Class3 Reports
Documentation
Training & Tutorials
support.ansys.com
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 10/11© 2012 ANSYS, Inc. December 17, 2012 10
About search
The ANSYS Customer Portal’s searchis powered by dedicated Google ®
hardware.
Mesh = Meshed = Meshing
Export = Exported = Exporting
XXXXX = YYYYY = ZZZZZ
Example:You want a meshing tutorial for ANSYS Meshing and your search
has results for other products that are not of interest to you; by
selecting the product facet “ANSYS Meshing” you can narrow
down your results further.
Search Facets
7/27/2019 CFX-Intro 14.5 L01 Introduction
http://slidepdf.com/reader/full/cfx-intro-145-l01-introduction 11/11
© 2012 ANSYS, Inc. December 17, 2012 11
Support / downloads / training
Submit and review service requestsIf you cannot find the answer to your question within the ANSYS Customer Portal then
you can submit a service request. A member of ANSYS technical support will then get
back to you with advice or a solution.
Download the latest software and updates
Download ISO images if you wish to create a DVD which is recommend for installations
on multiple computers and allows you to keep an archive of the installation for later re-
use.
Individual downloads can also be selected if you have a limited speed internet
connection.
Download classroom and video training material
Training and tutorial material are available for both a broad range of ANSYS products
and user’s experience. Search the hundreds of courses available and improve your
knowledge of ANSYS software.