Post on 30-Nov-2020
transcript
Bulletin No. 1951
Form Measurement
Compact new roundness tester combines outstanding cost/performance ratio with full measurement capabilities
Compact Roundness Measurement
ROUNDTEST RA-10
2
Improve quality and lower costs with roundness verification.
Verification of geometrical tolerances, including roundness, is a must in today's quality-conscious environment.Roundness measuring machines with the ability to perform product verification in conformity with ISO, JIS and other standards are indispensable to any quality control system that aspires to implementing high-grade quality assurance. Heightened awareness of production quality and higher quality goods will help enhance your corporate image with the buying public.
Roundness verification attempted using basic measuring tools involves the following drawbacks:
Once roundness measuring machines are introduced into quality control:
Definition of Roundness
3
Simple, beginner-friendly operation
High accuracy even though it is a low-end machine
Large LCD panel displays measurement results and recorded profiles in an easy-to-view fashion
The built-in high-grade thermal printer prints out measurement results and recorded profiles on demand
Compact design means small installation space
Options that further enhance usability
Four easy steps to measurement
Clamp the workpiece to the jig.
Bring the detector into contact with the workpiece.
Press the [CONDITION (setup recall)] button, as needed.
Press the [START] button.
High-Precision Roundness Measurement
4
Main Measuring Unit
Detector
Part setting jig (Optional)
High-precision air bearings
Built-in printer
Z-axis ABS scale (Optional)
X-axis stop (Optional)
Slider
Large LCD panel
Simple operation panelSpace-saving design
High-precision air bearings provide highly accurate measurement
Measurement results can be sent to the built-in printer or exported for external processing and storage
5
Control Panel
Measurement screen/result screen switching
Printer control
Setup button
Zero Set button
Large LCD screen
Setup Recall
Setup definition
Measuring range switching
Sample Result Screen (Roundness)
Measurement data editing function
Useful functions help setting up prior to measurement Limaçon function compensates for eccentricity
6
Types of Analysis
7
Specifications
Order No. 211-601A
12AAB681
Standard accessoriesOrder No.350366611755-0411BAB94112AAB68112BAJ340——————————
Main unit
211-045: Magnification checking gage
Optional accessories211-016: Reference hemisphere*
997090: Gage block set for calibration
358592: Replacement element for filter358593: Replacement element filter regulator
* Optional spacer (12AAH420) is required
8
12AAB681 12AAB682 12AAB683 12AAB684
[2.0
7”(5
2.5)
]
ø.16”(ø4)
2.60
” (6
6)
.22”(5.5)
For standard applications
In ID measurementDia.: .30”(7.5mm),Depth: 1.97”(50mm)
[2.0
7”(5
2.5)
]
2.60
”(66
)
ø.16”(ø4)
Useful for notched workpieces
Example
.28”(7)
For stepped applications
Example
ø.16”(ø4)
.46”(11.7)
[2.0
7”(5
2.5)
]
2.63
”(66
.7)
For inside-corner applications
Example
ø.16”(ø4)
30°
.30”(7.5)
[2.0
6”(5
2.3)
]
2.60
”(66
)
12AAB687 12AAE859 12AAB674 12AAE855
Enlarged image
For extra small hole applicationsDia.: .04”(1mm),Depth: .10”(2.5mm)
ø.02”(ø0.5) carbide ball
[2.0
7”(5
2.5)
]
2.60
”(66
).1
2”(3
)
.10”
(2.5
)
ø.04”(ø1)
ø.16”(ø4)
Enlarged image
For small hole applicationsDia.: .06”(1.5mm),Depth: .39”(10mm)
ø.03”(ø0.8) carbide ball
[2.0
7”(5
2.5)
]
ø.02”(ø0.6) .4
8” (12)
2.60
”(66
)ø.16”(ø4)
ø.06”(ø1.5)
.39”
(10)
Enlarged image
For small and deep hole applicationDia.: .12”(3mm),Depth: .71”(18mm)
ø.06”(ø1.6) carbide ball
[2.0
7”(5
2.5)
]
ø.16”(ø4)
2.60
”(66
).7
9”(2
0)
ø.05”(ø1.2)
.71”
(18)
ø.12”(ø3)
For small and deep hole applicationDia.: .12”(3mm),Depth: 1.50”(38mm)
ø.06”(ø1.6) carbide ball
[2.0
7”(5
2.5)
]
ø.05”ø1.2)
1.57
”(40
) 2.60
”(66
)
ø.16”(ø4)
1.50
”(38
)
Enlarged image
ø.12(ø3)
12AAB686 12AAB696 12AAB695 12AAE856
Example
ø.04”(ø1) carbide ball
2.60
”(66
).8
8”(2
2.3)
ø.03”(ø0.8)
ø.16”(ø4)
[2.0
7”(5
2.5)
]
For small hole applications
Example
2.68”(68)
2.60”(66)
ø.16
”(ø
4) .2” (5)
.02”(0.5)
R1
ø.08”(ø2)
12AAB685 12AAB694 12AAB676 12AAE857
Example
Filtering out the effects of asperities by tracing with R15tipped stylus
Cutter mark
R15
ø.16”(ø4)
[2.0
7”(5
2.5)
]
105°
2.60
”(66
)
ø.08”
(ø2)
.37” (9.5)
R1
.02” (0.5)
ExampleFor narrow groove applications
[2.0
7”(5
2.5)
]
ø.16”(ø4)
2.60
”(66
).0
2”(0
.5)
ø.47”(ø12)
Compatible with CMM styliwith M2 threaded shank
M2 depth 5
ø.16”(ø4)
2.20
”(56
)
[1.6
7”(4
2.5)
]
Compatible with CMM styliwith M2 threaded shank
M2
[2.0
7”(5
2.5)
]
ø.16”(ø4)
.14”(3.5)
2.70
”(68
.5)
2.66
”(66
)
*
Optional Accessories
ø.02”(ø0.5) carbide ball
2.66”(67.5)
ø.16
”(ø
4)
2.60”(66)
.10”
(2.5
)
ø.04”(ø1) carbide ball
2.66”(67.5)
ø.16
”(ø
4)
2.60”(66) .22”
(5.5
)
9
Directly mounted on the rotary table for useCentering chuck Collecting Chuck
OD/ID mating jig [Semi-custom product]
When installed on the rotary table, this accessory enables the user to efficiently perform centering and leveling adjustments in synchronization with the adjustment Navi DAT.
Order No. 211-052 Order No. 211-051
Individual Collets*4
Order No.12AAH40212AAH40312AAH40412AAH40512AAH40612AAH40712AAH40812AAH40912AAH41012AAH41112AAH41212AAH41312AAH414
Order No. 12AAH426
Options that can be installed on the alignment table
Order No. 211-032 Order No. 211-031
X-axis stop
Order No. 12AAH320
SD scale for Z axis*
Order No. 12AAH318 Order No. 950-990
211-053: for ø1.96” (50mm) 211-054: for ø1.96” (50mm)
211-055: for ø.39” (10mm)
10
Installation Environment
Power supply
Air supply capacity and connection details
11
2.95”(75) 4.53”(115)5.31”(135)15.7”(400)1”
(25)
1.38
”(3
5)4.
6”(1
17)
7.13
”(18
1)
14.2”(360)17.7”(450)
12.7
”(32
3)5.
63”
(143
).7
9”(2
0)
5025
1”(25)
ø 5.5”(140)
3-M5xD10(120° arrangement)
M5xD10
Four concentric grooves: W1xD0.5 (ø32, ø60, ø88, ø116)
3-M5xD10(120° arrangement)
PCD 80
PCD 124
C3
min.2.36”(60)
min
.3.9
4”(1
00)
14.2
”(36
0)
max. 19.9”( 505.5)
3.94”(100) 2.65”(65)
Wall
Wall
Dimensions
Turntable top view Installation floor plan
External dimensions
Small Tool Instruments andData Management
Test Equipment andSeismometers
Digital Scale and DRO Systems
Coordinate Measuring Machines
Sensor Systems
Optical Measuring
Form Measurement
Vision Measuring Systems
Aurora, Illinois(Corporate Headquarters)
Westford, Massachusetts
Huntersville, North Carolina
Mason, Ohio
Plymouth, Michigan
City of Industry, California
One Number to Serve You Better1-888-MITUTOYO (1-888-648-8869)
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest ap-plicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of Mitutoyo prod-ucts may require prior approval by an appropriate governing authority.Trademarks and RegistrationsDesignations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The ap-propriate companies should be contacted for more complete trademark and registration information.
We reserve the right to change specifications and prices without notice.