Guide to Pavement Technology

transcript

promoting improved road transport outcomes

www.austroads.com.au

Austroads

Guide to Pavement

Technology

Parts of the Guide to Pavement TechnologyPart 1 Introduction to Pavement TechnologyPart 2 Pavement Structural DesignPart 3 Pavement SurfacingsPart 4 Pavement Materials

Part 4A – Granular Base and Sub Base MaterialsPart 4B – AsphaltPart 4C – Materials for Concrete Road PavementsPart 4D – Stabilised MaterialsPart 4E – Recycled Materials

Part 4F – Bituminous BindersPart 4G – Geotextiles and GeogridsPart 4H – Test MethodsPart 4I – Earthworks MaterialsPart 4J – Aggregate and Source RockPart 4K – SealsPart 4L – Stabilising Binders

Part 5 Pavement Evaluation and Treatment DesignPart 6 Unsealed Pavements Part 7 Pavement MaintenancePart 8 Pavement ConstructionPart 9 Pavement Work PracticesPart 10 Sub-Surface Drainage

Design: materials assessment

Design: environments

Provision of drainage

Structural Design: thickness and qualities of materials

Design: consider traffic loads applied

Construction:

Construction

Surfacing types and characteristics

Rehabilitation and Maintenance

Assessing condition of existing pavements & cause of distress

Rehabilitation treatments

Maintenance treatments

All pavement types

What’s newPart 1 Introduction to Pavement TechnologyPart 2 Pavement Structural DesignPart 3 Pavement SurfacingsPart 4 Pavement Materials

Part 4A – Granular Base and Sub Base MaterialsPart 4B – AsphaltPart 4C – Materials for Concrete Road PavementsPart 4D – Stabilised MaterialsPart 4E – Recycled Materials

Part 4F – Bituminous BindersPart 4G – Geotextiles and GeogridsPart 4H – Test MethodsPart 4I – Earthworks MaterialsPart 4J – Aggregate and Source RockPart 4K – SealsPart 4L – Stabilising Binders

Part 5 Pavement Evaluation and Treatment DesignPart 6 Unsealed PavementsPart 7 Pavement MaintenancePart 8 Pavement ConstructionPart 9 Pavement Work PracticesPart 10 Sub-Surface Drainage

What’s updated and replacedPrevious publication Guide to Pavement Technology

Pavement Design Guide, AP-G17/04 Part 2 Pavement Structural Design

Pavement Design for Light Traffic, AP-T36/06

Part 2 Pavement Structural Design

Guide to Selection of Roads Surfacings, AP-G63/03

Part 3 Pavement Surfacings

Pavement Rehabilitation Guide, AP-G78/04

Part 5 Pavement Evaluation and Treatment Design

Asphalt Guide, AP-66/02 Part 4B AsphaltPart 4F Bituminous bindersPart 8 Pavement construction

Sprayed Sealing Guide, AP-G76/04 Guide to Selection and Use of Bitumen Emulsions, AP-G73/02

Part 4F Bituminous bindersPart 4K SealsPart 8 Pavement construction

What’s updated and replacedPrevious publication Guide to Pavement Technology

Guide to Stabilisation in Roadsworks, AP -60/98 Mix Design for Stabilised Pavements, AP-T16/02

Part 4B Stabilised materialsPart 4I Earthworks materialsPart 4L Stabilising bindersPart 8 Pavement construction

Asphalt Recycling Guide, AP-44/97

Part 4E – Recycled materials

NAARSA Pavement materials (1976)

Part 2 Natural gravels Part 3 Crushed rock Part 4 Aggregates Part 5 Quality description &

assurance

Part 4A Granular bases and subbasesPart 4J Aggregate and source rockPart 8 Pavement construction

Road Maintenance Practice, AP-13/91

Part 7 Pavement maintenance

Promotion of the new guide

CPEE and AAPA are increasingly providing detailed training involving Austroads publications.

Training offered by the CPEE covers most parts of the Austroads Guide to Pavement Technology

ARRB Roadshows will be used in promoting more general awareness

An opportunity to include Austroads presentations in the AAPA Conference in October 2009

A review panel communiqué and preparation of technical notes as project deliverables have also been suggested

Thanks

Thanks to Austroads Pavement Technology Review Panel members

– 5 Program managers

Peter Balfe (VicRoads)

Gary Liddle (VicRoads)

Peter Mitchem (VicRoads)

John Worrall (QDMR)

David Hubner (QDMR)

– 2 Program Executives

Gary Rykers (VicRoads)

Philip Rankin (QDMR) Program Executive

Thanks to Authors

ARRB Staff

– Allan Alderson– Bob Andrews– Ryan de Carteret– Lee Comport– Geoff Jameson– Colin Leek– Mike Shackleton– Kieran Sharp– Binh Vuong

External authors

– Gary Boon– David Dash– Barry Fielding– John Hodgkinson– John Keith– John Metcalf– Justin Moss– John Nichols– John Rebbechi– David Svolos– George Vorobieff– Geoff Youdale

Prize for part with most authors: Part 4C Materials for Concrete Pavements

Justin Moss

David Dash

John Hodgkinson

Gary Boon

David Svolos

John Nichols

John Keith

plus a Victorian Kieran Sharp

Special mention

John Rebbechi author or co-author of 7 parts!

– Part 3 Pavement Surfacings– Part 4B Asphalt– Part 4E Recycled materials– Part 4F Bituminous binders– Part 4K Seals– Part 8 Pavement construction– Part 9 Pavement work practices

Guide to Pavement Technology

Documents