JM RhinoPlate Overview

JM RhinoPlate Roofing Concept

• INDUCTION– Electromagnetic induction

is an invisible force used to generate heat in a conductor

– This heat can be used to activate a powerful bond between thermoplastic roofing materials and coated plates, without penetrating the membrane

– Induction heating is used safely in many industrial and consumer applications

Components

• RhinoPlate Welder• Magnetic cooling

clamps– Set of 6 / tool

• JM RhinoPlates– TPO

• JM Roofing Fasteners

Five Steps to a Better Roof

• Install Insulation… screw down with coated RhinoPlates

• Roll out the Membrane…• Weld Seams… with

standard tool• Attach Field… at each

insulation fastener with RhinoBond tool

• Clamp In Place… squeeze membrane – only 1 minute and its totally secure

System ComparisonTraditional System• 10’ Roofing Membrane: field• 5’ Roofing membrane: 15’ from

parapet in perimeter zone.• Insulation attachment: 6/per board

using standard plate • Membrane attachment: Seams

mechanically Fastened 6” O.C.• Seam attachment; Heat welded end

laps• Corner zone attachment: Half-

sheets and additional fastening required in corners

• Meets FM 1-90 requirements

Rhinoplate System• 10’ Roofing Membrane: field and

perimeter zones• Insulation attachment: 6/board using

Rhinoplate• Membrane attachment: Membrane

inducted to Insulation plates• Seam attachment: Heat welded end

laps• Corner zone attachment: Additional

plates required in insulation only.• Meets FM 1-90 requirements

JM RhinoPlate Advantages

• No seam fasteners / No penetrations• No half sheets / Fewer seams• 25-50% fewer fasteners• Best in class wind uplift resistance• Dry-in larger areas faster• Even load distribution• Reduced flutter (not dependent on sheet width)• Great looking roof!

The JM RhinoPlate Advantage

RhinoPlate distributes wind loads evenly across the roof

High Performance

RhinoPlate resists over 500 pounds of force

Performance is Proven

UEATC and Dynamic Testing

RhinoPlate is SAFER & GREENER

1. No adhesives… eliminates solvents and pollutants

2. No fumes… stops complaints from people using the facility

3. No hazardous materials… Removes logistics hassles storing flammables

JM RhinoPlate Recap

• Reduces fasteners• Eliminates half sheets• Gets rid of flutter• Drys-in faster• Works from 0 - 120F• Environmentally friendly

Thank you