MaintenanceStep by step

1.Revisar The seals on the Computer.

If the computer still has them do nothing and call a technician. Optionally From where you bought

2.Apagar Team

In the event that it is turned on

3.Disconnect Outlet Team.

4.Desenchufe Each Computer connectors (PS2, USB, Parallel, VGA ...)

5. Remove the screws and uncover the computer

Care With the loss of a screw

6.With A Freeze dryer to remove dust that is on the Board.

Check that everything is in perfect condition

Clean RAM With A Draft and carefully

Tape Tower Put the previously removed screws? Wipe out and appropriate to other Parties

7.Limpie keyboard tilted down with a blower or dryer.

Remember that the dryer should be in Frio

8.Limpie the monitor with a clean dry cloth.

9.Limpie external cables with a clean, dry.

10.Connect All Respectively …

11 Turn on your computer and check for a good functioning of the PC, check that the Internet has been running otherwise

recheck the connection.

End