Post on 13-Mar-2022
transcript
J-frame grille
Hex head screw(provided)
Removable AG10 core
Typical drywall screw(not provided)
Parts needed for assembly using method #513
Hex. head screw driver(provided)
Disclaimer:This step by step layout is one of the many ways someone can install their custom grilleusing method #513
Architectural Grille
REV
SHEET
-A3
SIZE
SCALE
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
DESCRIPTION
CUSTOMER Drawn byHeg
#513 Method of fastening 1"=1.5" DMS.513.1
A
DETAIL A SCALE 2 : 1.5
Step 1:Remove the AG10 core from j-frame by removing all the hex head tab screws,using the hex head screw driver that is provided. (If installing multiple grilles be sure to keep cores and frames together for easier installation).
DMS.513.21"=1"#513 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille
B
DETAIL B SCALE 1.5 : 1
Wall with frame set in
Step 2:Place j-frame into your opening. Attach frame to wall / ceiling using drywall screws(not provided).Screw through the provided holes in the flange as necessary.
DMS.513.31"=1.75"#513 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille
Step 3:Spackle, sand and finish painting before reinstalling your AG10 core.
DMS.513.41"=1.75"#513 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille
Step 4:Reattach AG10 core to j-frame usinghex head screws and the hex head screw driver provided.
DMS.513.51"=1.75"#513 Method of fastening
HegDrawn byCUSTOMER
DESCRIPTION
42 Second AvenueBrooklyn, NY 11215www.archgrille.com
SCALE
SIZE
A3 -
SHEET
REV
Architectural Grille