Post on 10-Apr-2020
transcript
PLASTIC RECYCLING
MACHINES & PLANTS FOR WASTE RECYCLING SOLUTIONS
Founded in 1996, Promeco SpA is an Italian Company based in Comothat manufactures, on proprietary technology, plants and equipment forwaste recycling and recovery with energy production, material recoveryor production of finished goods.
Innovation, R&D, passionate and skilled team along with the customersatisfaction have always been the success of Promeco and they still arethe peculiarities of our Company.Besides the historical Promeco-patented equipment, like single and doubleshafts shredders, extruders, densifiers, briquetting machines, separators,squeezers and centrifuges, the Company offers a wide range of turn-keyplants, among which:• briquetting and pelletizing plants• shredding plants• plants for RDF production• plants for the production of second raw material and finished products• plants for recycling of post-consumer plastic waste• plant for the catalytic conversion of mixed plastic waste into liquid fuel• plants for recycling of waste pulper• plants for hospital waste processing• plants for peat substitute production from green waste and biomass fiber• plants for the pretreatment of the organic matter of MSW for anaerobic digestion
Promeco is able to develop customized solutions too.Promeco plants are composed for 80% by machinery at 100% designed,constructed and assembled by the same Promeco which is still thecustomer after-sale referent thanks to its well-stocked storage. The constant R&D allows the development of new processes in responseto specific requirements of the waste problem, which requires to anticipatefuture lifestyle and environmental laws which are constantly changing.The Company policy focus on product quality: robustness and functionality ofthe machines that maintain their value over time. The ability to challengeideas and concepts and to interact with partners worldwide has allowedand still allows Promeco to stay highly competitive and to be an idealpartner for the world market.
COMPANY PROFILE
INDEX
PROMECO EXTRUDER SYSTEM PES600 ................................................. 4
PROMECO EXTRUDER SYSTEM PES600 for briquette production ......... 8
PROMECO EXTRUDER SYSTEM PES600 for pellet production ............. 10
PROMECO DENSIFIER ....................................................................... 12
ADVANCED SOLUTION FOR FILM RECYCLING ................................... 14
PROMECO ECO DRYER PED ............................................................. 16
PROMECO ECO CENTRIFUGE PEC .................................................... 17
PROMECO SHREDDER KR “Single shaft shredder / grinder” .............. 18
PROMECO IGGY MILL “Fast grinder” ............................................... 20
MIXED PLASTICS RECYCLING #3 to #7 PLASTICS .............................. 22
LDPE FILM WASHING LINE AND LDPE PELLET REGENERATION ............. 24
FROM WASTE PULPER TO RECYCLED PAPER & GRANULATER PLASTIC .. 25
PLASTIC RECYCLING LINE ................................................................. 26
PLASTIC TO DIESEL ........................................................................... 27
ADVANCED WASTE
TECHNOLOGY
PATENT No. 1348578
THE MULTIPURPOSE MACHINE
4
PROMECO EXTRUDER SYSTEMPES 600
Our standard production
Screw diameter: 300 or 600 mmMotor (with inverter): 90, 315 or 400 kWPower consumption 50-60% of power motor installedProduction: from 350 to 3.500 kg/h or 30 m3/hMatrix type: M (for pellets), F or V (for briquettes) or C (for compost)
The PES - Promeco Extruder System - is the simplest, mostflexible, efficient and effective solution to the problems ofagglomeration and volume reduce compacting toproduce briquettes and pellets. The flexibility of this machine allows the treating of differentmaterials. PES systems have been successfully used toprocess: • Mixed plastics, paper and cardboard, textiles and wood • Commercial waste and waste residual from sortingplants
• Industrial solid waste similar to municipal waste • Plastics (PE, HDPE, EPS, PP, PVC, car fluff of polymers etc.) • Mix composed by the constituents of the typical inorganicfraction of MSW used as RDF (lightweight plastics, textiles,wood, paper and cardboard);
• Car fluff after pre-treatment plant• Wood waste and green waste
The applications of PES system are endless. Amongst them: • Production of RDF pellets (thickened or briquettes) • Production of profiles and/or finished goods (e.g. spacersfor pallets; poles for agriculture, wheel stoppers for cars;profiles for walls, structures and insulation; curbs outdoor)
• Agglomeration of mixed plastics• Pre-treatment of the organic fraction for composting • Production of peat substitute from wood waste PES have been successfully used upstream of traditionalextruders, exploiting their characteristics to pre-treat thematerial. More specifically, PES are particularly suitable forthe pre-treatment of materials in output from washing lines(packaging films, agricultural films).
5
Input
PROMECO EXTRUDER SYSTEM exerts pressure and friction onthe material with consequent heat generation. This changes the materials structure and shape.
Main Applications
Plastics, paper and cardboard
Shredded fluff
Urban solid waste dry fraction
Mixed plastic
Organic and green waste
6
OutputCompounded profiles and finished products
R.D.F. for waste to energy
R.D.F. for gasification
Plastics in briquette, granule or thickened
Materials for horticulture and agriculture
PROMECO EXTRUDER SYSTEM PES
7
BRIQUETTES FROM EVERY KIND OF MATERIAL
8
PROMECO EXTRUDER SYSTEM PESFOR BRIQUETTE PRODUCTION
F OR V-MATRIX FROM MSW/RDF, CAR FLUFF, HOSPITAL WASTE FOR GASIFICATION
OR TO BE GRANULATED TO GET RDF
The PES V or F matrix briquetting machine is the most simple,flexible, efficient and effective solution to the problems ofdensification and sintering.The extreme flexibility of the machine allows processing ofdifferent materials. PES has been used successfully to treat: • Mix of plastics, paper and cardboard, textiles and wood • MSW dry fraction• Industrial solid waste (similar to urban waste) • Mix composed by the typical constituents of the dry fractionof municipal waste used as RDF (lightweight plastics, textiles,wood, paper and cardboard);
• Car fluff system flexibility Waste is characterized by the inconsistence of its quality.Moisture, density, composition and size can vary significantly.The PES was designed to automatically compensate for anyfluctuations, in order to maintain the production rate as stableas possible or the quality of the output. The main motor is generously oversized in order to maintainthe production rate even in the presence of material more"difficult" to treat. Under normal conditions, however, is used60% of installed capacity.
The control system, based on PLC, continuously monitorsseveral parameters, including electrical power consumptionand temperature of the extruded material, in order to adjustthe operations of the machine accordingly.The control action is based on these principles: • Decrease in electrical power consumption: the speed ofthe augers of the feeding bunker is increased, in order tomaintain a constant production rate
• Increase in electrical power consumption: the control systemacts on the matrix of extrusion, by opening the top, allowingan easier flow of material.
• Decrease in the temperature of the material, below adesired value: the control system closes the matrix extrusion,decreases the speed of the augers of the feeding bunker,reduces the motor speed.
• Increase in the temperature of the material: the controlsystem opens the extrusion matrix, increases the speed ofthe augers of the feeding bunker and increases the speedof the main motor
Input materialNon-reusable fractions MSW, paper, cardboard and plastic • Optimum size of about 40x40 mm. • Average humidity 15% max up to 20-23% depending
on the characteristics required for the briquettes. • Homogeneous mixture of materials with minimum
25% of a low melting point plastics (LDPE polyethylene film).
Thermoplastic and thermosetting waste• Mixed plastics similar to heterogeneous melting point
(low melting point / melting high)• Polyethylene washed, unwashed also mixed with other
materials, polypropylene, PVC, ABS, polycarbonate
Car fluff from auto shredder residues (ASR) Material to process consists mainly of a mix of plastics,elastomers, rubber parts, textiles, protective coatings,electrical cables, glass, soil fractions and non-ferrousmaterials in general.The requirements that such a mix must satisfy in orderto ensure the effectiveness of the extrusion process areessentially: • Optimum particle size of about 40x40 mm, easily
achieved with a pre-grinding. • Max humidity up to 20-23% depending on the
characteristics required for the briquettes.
Products RDF briquettesThe briquettes have different shapes, sizes from 40-200 mm,an average degree of compactness and high adherence.Briquettes can then be ground (in a shredder without grate) toobtain a mix of high density material with a variable size 5-80 mm, particularly suitable for fluidized bed furnaces. Specific gravity between 0,4 and 1,2 kg/dm³. Moisture content ranging between 2 and 11% depending onthe composition of the refusal to start.
Advantages resulting from treatment with PES:• Strong decrease of the times of densification of the product. • Fewer machines to install and manage, and relative
reduction of investment costs • Small areas occupied • Minor electric power installed and used • Simplified maintenance• Increased productivity and versatility of the system• Low running costs and operation of the plant
Production capacity Capacity changes depending on the characteristics ofthe treated waste and the desired output; it can reach3.500 kg/h.
9
System flexibility Normally the waste have different size, water content,density and composition variable so the PES densifier hasbeen projected to handle this difference automatically inthe best way.The control system, based on the PLC logic, continuouslychecks the most important parameters as current andtemperature on the plate of the machine and then arrangesthe working process automatically.
Input materialRPF fluff• Plastic content > 10%• Moisture < 35 %
Products
Pellet• Output size of the melted material from 25 to 60 mm• Water content < 1%• Density > 1.000 kg/mc• Completely homogenized
10
PROMECO EXTRUDER SYSTEM PESFOR PELLET PRODUCTION
M-MATRIXPELLET FROM MSW/RDF FLUFF: Ø20 – 30MM TO BE USED IN CEMENT PLANTS OR TO BE GRANULATED IN ORDER TO GET RDF
The Promeco Extruder System – M matrix is the simplest, easiest and the most efficientsolution for plastic densification and agglomeration.
CapacityThe treatment capacity depends mainly on the characteristicsof the input plastics and on the required density of the product:it can reach 2.500 kg/h.
Advantages of the treatment with PES densifier• Less space required for the equipment• Lower power installed and used than normal system• Simplified maintenance time and costs• High productivity and versatility• Low management and operation cost
11
System flexibility Normally the waste have different size, water content,density and composition variable so the PES densifier hasbeen projected to handle this difference automatically inthe best way.The direct combination between the machine PES andthe traditional Extruder allows the proper feeding of thematerial into the single shaft shredder and guarantees anhomogeneous production.
The control system, based on the PLC logic, continuouslychecks the most important parameters as current andtemperature on the plate of the machine and then arrangesthe working process automatically.
Input materialThermoplastic plastic and plastic waste• Mix plastic with similar melting point• PE from washing line, PE, PVC, PP,EPS, Tetrapack scraps Al+PE or mix of different polyolefin
ProductsMelted plastic• Output size of the melted material from 25 to 60 mm• Water content < 1%• Completely melted and homogenized
Plastic melted outputPlastics (LDPE, HDPE, PP, EPS, PVC, polylaminated scrapsAl+PE, etc.)
12
PROMECO DENSIFIER
The densifier Promeco Extruder System is the simplest, easiest and the most efficientsolution for plastic densification and agglomeration.The flexibility of the system can process different plastics as:• Mix plastics as scraps, industrial & commercial and waste plastics• Plastics (PE, HDPE, EPS, PP, PVC as foil shredded, powder or similar)
M-MATRIXFOR WASTE MIXED PLASTIC, WASHED LDPE
CapacityThe treatment capacity depends mainly on the characteristicsof the input plastics and on the required density of theproduct: it can reach 1.500 kg/h.
Advantages of the treatment with PES densifier• Mixing and homogenization of different polymers• Homogenous and continuous melting• Output product completely dry• Degasing on Promeco Extruder System and therefore
not necessary in the traditional extruder• Less time required to melt the product than standard
system• Fewer machines to install and manage, and relative
reduction of investment costs• Less space required for the equipment• Lower consumption of power (around 0,092 kW/kg of
plastic processed)
13
System flexibility Normally the waste have different size, water content, densityand composition variable so the PES agglomerator hasbeen projected to handle this difference automatically inthe best way.The control system, based on the PLC logic, continuouslychecks the most important parameters as current andtemperature on the plate of the machine and then arrangesthe working process automatically.
Input materialWet plastic material from washing plants like:• Packaging thin film• Film from agriculture
ProductsGranule of film
14
ADVANCED SOLUTION FOR FILM RECYCLING
The innovative Promeco Pelletizer machine is made by the combination of PromecoExtruder System agglomerator and a traditional single screw extruder.This solution is suitable for the pelletizing of wet plastic like packing and agriculturalfilm coming from washing plants.Promeco agglomerator dries and pre-melts the plastic material that directly feedsthe single screw extruder. The double vent system on the pelletizer grants the residualmoisture removal from the product that is ground, subject to filtration.
IN LINE AGGLOMERATION AND PELLETIZING
CapacityThe treatment capacity depends mainly on the characteristicsof the input plastics and on the required density of theproduct. Maximum capacity: 1.500 kg/h.
Advantages of the treatment with PES agglomerator and pelletizer
• Capability to treat materials up to 20% moisture• Triple vent systems, one on the agglomerator and two
on the pelletizer• 60 mm max dimension of the material to be processed• Output increase• Less energy consumption• Small overall dimension due to the line compactedness• Elimination of the intermediated machinery between
agglomerator and pelletizer, such as belt, grinder, transports, storage, pressure feeding.
15
PROMECO ECO DRYER PEDFOR PLASTICS
The Promeco Eco Dryer is designed to reduce the moisturecontent and compact various materials such as:• Recycled polyethylene/polypropylene film from washinglines
• Mixed plastics • Scraps from paper mill pulper waste
Designed to be reliable and versatile, this machine removesmoisture (30 to 10% in the case of film material from washinglines), increases the apparent density of the processedmaterial, even up to a factor of 10, and more generally itcompacts the treated material.
Increasing the density of material from 1 up to 10, compacting and drying from 30% down to 10% moisture.
(PE-PP FILM,MIXED PLASTIC, RDF, WASTE PULPER, TETRAPAK)
16
Continuous process to dry plastic film from washing line, moisture from 30% to 8%.
Promeco Eco Centrifuge is specificallydesigned for the separation of waterfrom plastic.Input material is loaded into a smallfeeding bunker, where a screw dosesand introduces the material in the rotarydryer basket. The basket rotates at a very high speed.Due to the centrifugal force exerted on thematerial, this is propelled towards theinternal surface of the basket and isdewatered. The water is then collectedat the bottom of the machine. A screw inside the basket allows theadvancement of the material and thecontinuous cleaning of the internal surface
of basket; moreover it continuously mixesthe material, optimizing the efficiency ofthe process. The entire structure has been designed tooperate under heavy loads, and thisrequirement determines the considerablestrength and solidity of all the components,starting from the housing. Dryed plastic is conveyed by a pneumatictransport system (such as fan-through).
The forces are balanced and only thestatic weight of the machine is downloadedto the housing.A system continuously spraying oil ensuresthe automatic lubrication of the bearings,
thus reducing the time required formaintenance. The speed of the main motor and ofthe two augers are adjustable, allowingthe optimization of the capacity of themachine according to the type ofmaterial to process and the dewateringlevel to reach.All the equipments are controlled byan electrical control panel, giving thepossibility to operate the machine eitherautomatically or manually.
PROMECO ECO CENTRIFUGE PECFOR PLASTICS
(PE-PP FILM,MIXED PLASTIC, RDF, WASTE PULPER, TETRAPAK)
17
ConfigurationPromeco KR shredders answer themore diverse customer needs, both interms of production capacity than interms of materials to process. Machines are offered in severalconfigurations, differing in size, motorpower, number of knives and counter-knives.
ApplicationThe single rotor shredders Promeco KRhave been successfully used for thegrinding of various materials, including:• MSW inorganic fraction • RDF/RPF/SSF• plastic / rubber• packaging waste• light metals as aluminium profiles,cans, light iron scraps
• textile scraps• WEEE (waste electrical and electronic
equipment)• industrial products• leather• paper and cardboard• wood waste• cables
18
PROMECO SHREDDER KRSINGLE SHAFT SHREDDER / GRINDER
Promeco has been offering machines for many years that stand for strength, versatility,reliability, high production with low hourly operating and management costs, as wellas ease of maintenance. The single rotor shredders Promeco KR represent thedevelopment of a design that used to be very popular in the German-speakingmarkets in the mid-90s, that has been acquired by various world leading companies.Afterwards Promeco has improved the original design in all its most relevant aspects. The mechanical precision of Promeco KR guarantees the distance of 0,5 mm betweenrotating knives and fixed knives making the Promeco KR cut unique for its scissor-like feature. Moreover Promeco KR is perhaps the sole shredder processing with a10 mm grid.
Features
The shredders Promeco KR stand for:• robustness• optimization of the cutting process• reliability• versatility• ease of maintenance
Different size upon request
Production 1.000 kg/hour 12.000 kg/hour
Grid holes 10 mm 100 mm
Hydraulic motor 160 kW 250 kW
Mechanical motor 45 kW 132 kW
Rotor diameter 440 mm 730 mm
Rotor lenght 1.000 mm 2.800 mm
from to
Our standard production
19
Applications
This range of shredders are suitable to processed largevolumes of waste such as paper, cardboard, plastics, rubber,textiles, etc. These machines produce a high quality SRF (orRDF) or co-generating stations and for the cement industry.
Innovative design to cutting geometrics is a key feature ofthese granulators. Employing novel multi blade rotorconfigurations and unique cutting edge geometry. Robustengineering design techniques are required, reflective of thesometimes hostile working environment these machines arefound.
20
Promeco Iggy Mill has been designed specifically for the size reduction of pre-sortedor pre-shredded waste suitable for the production of Refuse Derived Fuel (RDF) orfor Solid Recovered Fuel (SRF) and other recycling applications. Our continuing innovation based on market demands and customer feedbacklead Promeco to develop a machine range to satisfy the most common shreddingrequirements in term of capacities and final size. The rotor diameters available fromØ670mm to Ø900mm and rotor lengths ranging from 1700mm to 2300mmtogether with the different rotor cutting configurations designed for specific materialsdetermine machine performance.
PROMECO IGGY MILLFAST GRINDER
from to
Power installed 22 kW 250 kW
Rotor speed 400 rpm 700 rpm
Rotor length [mm] 700 – 1.1000 – 1.400 – 1.690 – 2.100 – 2.300
Rotor diameter [mm] 400 – 580 – 670 - 900
Features• High energy efficiency• Easy screen change• Easy maintenance• Long service life
• Robust design• Low noise• High grinding capacity• Low running costs
Our standard production
Different size upon request21
PATENT No. 1348579
22
Advantages of the Promeco ExtruderSystem line
• Reduced number of machines involved • Low maintenance costs • Minimum floor area required• Low investment cost• Minimum electric power installed • Simplified maintenance • Increased productivity • Greater continuity of production • Versatility
Input waste:• Mixed plastic
Output material: • Densified granulated plastic as second raw material
MIXED WASTE PLASTICS RECYCLING#3 TO #7 PLASTICS
23
LDPE FILM WASHING LINE AND LDPE PELLET REGENERATION
Input waste:• LDPE film from agricultural• post-consumed film• industrial film
Output material: • LDPE pellet
24
Input waste:• waste pulper from paper industry• tetrapack pulper
Output material: • recycled paper back to paper mill• granulated plastic
FROM WASTE PULPER TO RECYCLED PAPER (BACK TO PAPER MILL) & GRANULATED PLASTIC
25
PLASTIC RECYCLING LINE
Input waste:• Mixed plastic
Output material: • Recyclable plastics (PET, HDPE, Film)• RDF
26
Input waste:• Mixed waste plastic
Output material: • Oil (yield: 1 kg of polimer = 1 lit. of oil)• Gas• Coke
EXCLUSIVE CUSTOMER
PLASTIC TO DIESELRESTORER TECHNOLOGY
RESTORER TECHNOLOG
Y
PATENT No. 1393116 – 1396562 – 256996 (1281/che/2006)
ADVANCED WASTE TECHNOLOGY
SHREDDING WASTE
DENSIFICATION
BRIQUETTING
PELLETTIZING
BIOEXTRUSION
WASTE SELECTION
DRYING
DEWATERING
PRE-TRATMENT FOR ANAEROBIC DIGESTION (WET AND DRY)
PEAT SUBSTITUTE
PLASTIC TO DIESEL
CUSTOMIZED PLANTS
PROMECO SPAvia Tevere, 51
22073 Fino Mornasco (COMO)ITALY
+39.031.267331www.promeco.it
promeco@promeco.it