SDC Verifier Main Presentation

transcript

Structural Design Code Verifier

Quick Support

www.sdcverifier.com2

Quick Support allows to get

access to your PC by SDC Verifier

specialist. Send your ID to us:

Skype: sdcverifier_helpdesk;

Phone: +31 15 30-10-310;

Email: support@sdcverifier.com

Quick Support does not require

Installation of Team Viewer

What is SDC Verifier?

The goal of SDC Verifier is checking structures according to

standards and report generation.

Load combinations: example from Standard

ual lo

SDC Verifier implements:

• Individual Loads;

• Load Sets;

• Load Groups.

A lot of loads and

combinations should

be checked according to

standards.

Load combinations: Add/Edit Multiple

Import Load Sets or Load

Groups from MS Excel

Create/edit few Load

combinations at once.

Panel Finder;

Beam Member Finder;

Complicated Loads: Wind, Buoyancy and Tank Load;

Rule Based Selector.

Panel Finder.

Recognizes all plates with their

dimensions automatically. Plates plot

Searches X, Y and Z sections.

Frames

Beam Member Finder.

Helps to define beam length. Can be used in Beam Buckling Check and custom checks.

Types of Joints

Beam Length Plot

User can modify joints manually or even define own (user) joints.

Wind and Buoyancy Loads

Buoyancy (water level calculation)

Pressure (depend on height) Water pressure including wave parameters.

Tank Ballast Load

Accelerations on tank content

included

Tank Load

Global and

local waterline

Applied force

and volume

Height along vertical axis

Rule based Selector

Always Up to date

Rule Types:

- Materials;

- Properties;

- Groups;

- Coordinate;

- Element Types;

- Element Shapes.

Operations:

- Add;

- Remove;

- Exclude;

- Reselect.

Coordinate Rule

Element Types Rule

Checks

Fatigue check according to different methods and

standards ;

Plate Buckling according to ABS and DNV standards;

Custom Checks.

Fatigue Check with mean stress correction

For single stresses

Fatigue Allowable Stress Design (Goodman relation)

Combined

Maximum Fatigue Damage

Allowable Stress depends on classification

Element Group 6 more

than 2 millions cycles

K4 welds example

Used by standards as DIN 15018, FEM 1.001, FKM

Fatigue Example

Allowable Stress vs Kappa Weld class K3 Weld class K0

Pylon Utilization Factor (Smax/Sallow)Notch group

Plate Buckling Check (ABS, DNV)

No FEM buckling but stress based

(for full ship +1000 buckling modes)

Results over sections. Values

which do not pass the check

are highlighted in red.

Automatically convert element

stresses into plate direction.

SDC Verifier is customizable

If check is missing use custom check

Simple example 1: Static Stress Check

Equivalent Stress

Utilization Factor

Sallow = Max (Yield, 0.7 * Tensile)

Utilization Factor = Stress / Sallow

Example 2: AISC Buckling Check

Completely custom report

Standard reports;

Report Wizard:

Quick selection method for report generation.

Report Designer:

Completely customizable method for fine tuning report

including extra text, summary etc.

Completely custom report

Report Wizard;

Report Designer.

Report Designer – previewer.

Advanced report

Report Wizard – easy

step by step report

Report Generation in Wizard

Generated Report

First Page

Model Setup

Job Settings

Tables

Checks

Model Setup Report

General information Property Table

Fem Load and Constraint

Description

Report Results

Result Tables

Result Plots

Checks

Tables

Displacement on nodes. Absolute maximum highlighted

Extreme Stresses

over directions

Extreme values over selections (properties)

Worst Stresses among loads

Sum of applied forces on loadsExtreme Location

Same plot different Views Same plot different Components

Report Generation in Designer

Export To WordPrint and Preview without Word

Extra Items

Regenerate

part of report

Edit Item

Properties

Move items

(Drag and

Edit properties

with context

menu easily

Toolbox with all project items

Re-use of calculation process

Set in SDC Verifier file:

full calculation settings

Apply all loads, load combinations and load groups

All checks (according to your standard)

Necessary calculation documents

Re-use .sdcv file as template with all above settings

Open as template

First model (template) New Model

Two models. Same report

Conclusions SDC Verifier the add-on for:

Verification of structure according to standards

Simple application of complicated loads

Translation of FEM results in (complicated) code checking results

Complete documentation of model and results

Focus on engineering let SDC Verifier do the bookkeeping

Use 45 days trial to check it yourself (download SDC Verifier on www.sdcverifier.com

and request trial at support@sdcverifier.com);

SDC Verifier Main Presentation

Documents