A

B

C

Small scale LED in-grade luminaires · STAINLESS STEEL

LED location luminaires and floodlights.

LED technology is characterized by the following features:

• Longlife

• Nomaintenance

• Lowenergyconsumption

• Colorstability

• Lowsurfacetemperature

AllLEDluminairesonthisdoublepagerequiretheuseofaremote

24VDCdrivertooperatetheLEDs.Thedriverisanaccessoryand

mustbeorderedseparately.Afoundationmustbesuppliedbythe

customer.Theseluminairesaredesignedtobearpressureloadsupto

4400lbs.fromvehicleswithpneumatictires.Theluminairesmustnot

beusedfortrafficlaneswheretheyaresubjecttohorizontalpressure

fromvehiclesbraking,acceleratingandchangingdirection.

BEGAcansupplyyouwithsuitableLEDreplacementmodulesfor

upto20yearsafterthepurchaseofLEDluminaires–seepage407.

FurtherLEDtechnicaldata,e.g.luminousflux,CRIanddimmingare

providedontheindividualluminairespecificationsheets,availableat

www.bega-us.com.

Location luminaire · white safety glass

square round Lamp A B C

7127 LED* 7027 LED* 1.1 W LED 3 1 3⁄4 2 1⁄27128 LED* 7028 LED* 2.2 W LED 4 5⁄8 3 1⁄8 3 7⁄8

Symmetrical floodlight · clear safety glass

square round Lamp b A B C

7117 LED* 7017 LED* 2.3 W LED 26° 3 1 3⁄4 2 1⁄27118 LED* 7018 LED* 4.3 W LED 23° 4 5⁄8 3 1⁄8 3 7⁄8

Asymmetrical floodlight · clear safety glass

square round Lamp b A B C

7119 LED* 7019 LED* 4.3 W LED 38°/ 35° 4 5⁄8 3 1⁄8 3 7⁄8

b = Beam angle * Remote driver required

LED in-grade luminaires · square or round faceplate

Stainless steel housing and faceplate White or clear safety glass Floodlights with reflectors made of pure anodized aluminum

LEDs require a remote 24 V DC Class 2 power supply (see page 403) Color temperature 4000 K (for 3000 K add suffix K3)

Pre-wired with 10 feet of 12 AWG wire and a waterproof cable gland entry into housing

Finish: #4 brushed stainless steel

UL or CSA listed, suitable for wet locations (see page 409) Protection class IP 67

207206