Date post: | 18-Feb-2016 |
Category: |
Documents |
Upload: | uponor-international |
View: | 249 times |
Download: | 4 times |
P LU M B I N G S O LU T I O N S
P R O D U C T C ATA LO G 2 0 1 2
Uponor Tap Water and Radiator Connection MLCP System
Uponor MLC pipesUponor MLC pipes •••••••••••••••••••••••••••••••••••••••••••••••••••••••• 6
Uponor MLC pipe conduitsUponor MLCP conduits •••••••••••••••••••••••••••••••••••••••••••••••••••• 8
Uponor composite press fittings MLC 16-32 mmUponor composite elbow ••••••••••••••••••••••••••••••••••••••••••••••••••• 9Uponor composite tee ••••••••••••••••••••••••••••••••••••••••••••••••••••• 10Uponor composite coupling ••••••••••••••••••••••••••••••••••••••••••••••••• 11
Uponor brass press fittings MLC up to 50 mmUponor brass adapters ••••••••••••••••••••••••••••••••••••••••••••••••••••• 13Uponor brass connection ••••••••••••••••••••••••••••••••••••••••••••••••••• 13Uponor brass elbow ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 14Uponor brass coupling ••••••••••••••••••••••••••••••••••••••••••••••••••••• 16Uponor brass tee ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 17Uponor brass screw connection •••••••••••••••••••••••••••••••••••••••••••••• 20
Uponor compression fittings MLC up to 25 mmUponor compression fi ttings MLC up to 25 mm •••••••••••••••••••••••••••••••••• 21
Uponor Riser system fittings MLC 63 -110 mm •••••••••••••••••••••••••••••• 24
Uponor tap water connections for MLCUponor brass tap connection •••••••••••••••••••••••••••••••••••••••••••••••• 29Uponor brass wall penetration ••••••••••••••••••••••••••••••••••••••••••••••• 31Uponor UPS connection •••••••••••••••••••••••••••••••••••••••••••••••••••• 32
Uponor tap water manifolds and accessoriesUponor brass manifolds and accessories •••••••••••••••••••••••••••••••••••••••• 33
Uponor radiator connection fittings for MLCUponor press connection ••••••••••••••••••••••••••••••••••••••••••••••••••• 35Uponor radiator connection adapters •••••••••••••••••••••••••••••••••••••••••• 35Uponor crossing fi tting •••••••••••••••••••••••••••••••••••••••••••••••••••• 36Uponor radiator connection units ••••••••••••••••••••••••••••••••••••••••••••• 37
Uponor radiator manifoldsUponor brass manifold ••••••••••••••••••••••••••••••••••••••••••••••••••••• 38Uponor accessories for radiator manifolds •••••••••••••••••••••••••••••••••••••• 38
Uponor radiator connection accessoriesUponor snap ring ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 39
List of content
3EEI-Int-MLC-01.12
Abbreviations •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4
4
Abbreviations
colour [-] colourd [mm] diameterd1 [mm] diameter 1d2 [mm] diameter 2DN [mm] diameter nominalFT ["] female threadFT m [-] female thread (metric)gauge [mm] gaugeh [mm] heighth1 [mm] height 1h2 [mm] height 2l [m] length in meterl [mm] lengthl1 [mm] length 1MT ["] male threadMT1 ["] male thread 1outlets [-] Number of outletsOV [V] operating voltages [mm] strength / wall thicknesss1 [mm] strength / wall thickness 1Type [-] Typew [mm] width
EEI-Int-MLC-01.12
Shortcut unit Description
Uponor pipe fastenings MLCUponor pipe fastenings MLC •••••••••••••••••••••••••••••••••••••••••••••••• 40
Uponor toolsUponor cutting tools •••••••••••••••••••••••••••••••••••••••••••••••••••••• 41Uponor bevelling tools ••••••••••••••••••••••••••••••••••••••••••••••••••••• 42Uponor bending tools ••••••••••••••••••••••••••••••••••••••••••••••••••••• 43Uponor pressing tools ••••••••••••••••••••••••••••••••••••••••••••••••••••• 43Uponor accessories •••••••••••••••••••••••••••••••••••••••••••••••••••••••• 46
List of content
5EEI-Int-MLC-01.12
International sales and delivery terms •••••••••••••••••••••••••••••••••••••• 48
Item search register ••••••••••••••••••••••••••••••••••••••••••••••••••••• 50
How to contact us ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 55
Uponor MLCP plumbing system > Uponor MLC pipes
Uponor MLC pipes
Uponor MLCP white in coilsDiffusion-tight multi-layer composite pipe (PE-RT - adhesive - longitudinally welded aluminium - adhesive - PE-RT) for distribution conduits, rising mains and connection lines for plumbing, radiator connection and fancoil connection. Fire classifi cation E according to DIN EN 13501-1. Pipe end caps as hygienic seal according EN 806.Resistance of temperature:Tap water: The maximum permanent operating temperature exists between 0°C and 70°C at a maximum permanent operating pressure of 10 bars. The short-term malfunction temperature is 95°C of a maximum of 100 hours in the operating lifetime.Heating: The maximum permanent operating temperature is 80°C at a maximum permanent operating pressure of 10 bars. The short-term malfunction temperature is 95°C of a maximum of 150 hours in the operating time per year.
Item no. d [mm] s [mm] l [m] Description unit
1013378 16 2.0 100 Uponor MLCP 16x2white in coils 100m 100 m
1013372 16 2.0 200 Uponor MLCP 16x2 (IPPC)white in coils 200m 200 m
1013380 16 2.0 500 Uponor MLCP 16x2white in coils 500m 500 m
1013383 18 2.0 200 Uponor MLCP 18x2white in coils 200m 200 m
1030549 20 2.25 100 Uponor MLCP 20x2,25 (IPPC)white in coils 100m 100 m
1013392 20 2.25 200 Uponor MLCP 20x2,25white in coils 200m 200 m
1030550 25 2.5 50 Uponor MLCP 25x2,5 (IPPC)white in coils 50m 50 m
1013400 25 2.5 100 Uponor MLCP 25x2,5white in coils 100m 100 m
1030551 32 3.0 50 Uponor MLCP 32x3 (IPPC)white in coils 50m 50 m
Uponor MLCP white in straight lengthsDiffusion-tight multi-layer composite pipe (PE-RT - adhesive - longitudinally welded aluminium - adhesive - PE-RT) for distribution conduits, rising mains and connection lines for plumbing, radiator connection and fancoil connection. Fire classifi cation E according to DIN EN 13501-1. Pipe end caps as hygienic seal according EN 806.Resistance of temperature:Tap water: The maximum permanent operating temperature exists between 0°C and 70°C at a maximum permanent operating pressure of 10 bars. The short-term malfunction temperature is 95°C of a maximum of 100 hours in the operating lifetime.Heating: The maximum permanent operating temperature is 80°C at a maximum permanent operating pressure of 10 bars. The short-term malfunction temperature is 95°C of a maximum of 150 hours in the operating time per year.
Item no. d [mm] s [mm] l [m] Description unit
1013432 16 2.0 5 Uponor MLCP 16x2white in straight length 5m 125 m
1013438 20 2.25 5 Uponor MLCP 20x2,25white in straight length 5m 85 m
1013442 25 2.5 5 Uponor MLCP 25x2,5white in straight length 5m 50 m
1013444 32 3.0 5 Uponor MLCP 32x3white in straight length 5m 30 m
1013446 40 4.0 5 Uponor MLCP 40x4white in straight length 5m 20 m
1013449 50 4.5 5 Uponor MLCP 50x4,5white in straight length 5m 20 m
1013451 63 6.0 5 Uponor MLCP 63x6white in straight length 5m 15 m
1013453 75 7.5 5 Uponor MLCP 75x7,5white in straight length 5m 5 m
1013455 90 8.5 5 Uponor MLCP 90x8,5white in straight length 5m 5 m
1013457 110 10.0 5 Uponor MLCP 110x10white in straight length 5m 5 m
EEI-Int-MLC-01.126
Uponor MLCP plumbing system > Uponor MLC pipes
Uponor MLC pipes
Uponor MLCP pre-insulated S 4 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 4 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Fire classifi cation E according to DIN EN 13501-1. For hot water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required. Pipe end caps as hygienic seal according EN 806.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013623 16 2.0 4.0 blue 100 Uponor MLCP 16 pre-insulated S4round, heat insulated, blue, coil 100m 100 m
1013624 20 2.25 4.0 blue 100 Uponor MLCP 20 pre-insulated S4round, heat insulated, blue, coil 100m 100 m
Uponor MLCP pre-insulated S 6 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 6 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Fire classifi cation E according to DIN EN 13501-1. For cold water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required. Pipe end caps as hygienic seal according EN 806.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013578 16 2.0 6.0 blue 50 Uponor MLCP 16 pre-insulated S6round, heat insulated, blue, coil 50m 50 m
Uponor MLCP pre-insulated S 9 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 9 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Fire classifi cation E according to DIN EN 13501-1. For hot water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required. Pipe end caps as hygienic seal according EN 806.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013625 16 2.0 9.0 blue 75 Uponor MLCP 16 pre-insulated S9round, heat insulated, coil 75m 75 m
1013626 20 2.25 9.0 blue 75 Uponor MLCP 20 pre-insulated S9round, heat insulated, coil 75m 75 m
1013627 25 2.5 9.0 blue 50 Uponor MLCP 25 pre-insulated S9round, heat insulated, coil 50m 50 m
Uponor MLCP pre-insulated S 13 mmConsists of pipe and insulating layer. Supplied in coils. Round extruded pipe insulation made of polyethylene foam with closed-cell material structure. Insulation thickness 13 mm, heat conductance rate 040. With sturdy, seamless foil coating, available in blue colour. Fire classifi cation E according to DIN EN 13501-1. For hot water conduits conforming to DIN 1988-2 (table 9). Additional continuous impact sound insulation required. Pipe end caps as hygienic seal according EN 806.
Item no. d [mm] s [mm] s1 [mm] colour [-] l [m] Description unit
1013628 16 2.0 13.0 blue 75 Uponor MLCP 16 pre-insulated S13round, heat insulated 50%, coil 75m 75 m
1013629 20 2.25 13.0 blue 75 Uponor MLCP 20 pre-insulated S13round, heat insulated 50%, coil 75m 75 m
1013630 25 2.5 13.0 blue 50 Uponor MLCP 25 pre-insulated S13round, heat insulated 50%, coil 50m 50 m
EEI-Int-MLC-01.12 7
Uponor MLCP plumbing system > Uponor MLC pipe conduits
Uponor MLCP conduits
Uponor conduitCorrugated, fi re classifi cation E conforming to DIN EN 13501-1. Supplied in coils.
Item no. d [mm] d1 [mm] d2 [mm] colour [-] Description unit
1012858 25/20 16 red Uponor conduit red 25/20 MLC 16 50 m
1012862 28/23 18 20 red Uponor conduit red 28/23 MLC 18/20 50 m
1012866 35/29 25 red Uponor conduit red 35/29 MLC 25 50 m
1012859 25/20 16 blue Uponor conduit blue 25/20 MLC 16 50 m
1012863 28/23 18 20 blue Uponor conduit blue 28/23 MLC 18/20 50 m
1012867 35/29 25 blue Uponor conduit blue 35/29 MLC 25 50 m
1012860 25/20 16 black Uponor conduit black 25/20 MLC 16 50 m
1012864 28/23 18 20 black Uponor conduit black 28/23 MLC 18/20 50 m
1012869 35/29 25 black Uponor conduit black 35/29 MLC 25 50 m
1012872 43/36 32 black Uponor conduit black 43/36 MLC 32 25 m
EEI-Int-MLC-01.128
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite elbow
Uponor composite press elbow MLC up to 32Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety. Press without bevel.
Item no. d [mm] Description unit
1022714 16 Uponor composite elbow MLC 16-16 10 pcs
1022715 20 Uponor composite elbow MLC 20-20 10 pcs
1022716 25 Uponor composite elbow MLC 25-25 5 pcs
1022717 32 Uponor composite elbow MLC 32-32 5 pcs
Uponor composite press elbow MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety.
Item no. d [mm] Description unit
1046386 40 Uponor composite press elbow MLC 40-40 5 pcs
1046387 50 Uponor composite press elbow MLC 50-50 3 pcs
Uponor composite press elbow MLC, 45° 40-50Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety.
Item no. d [mm] Description unit
1046388 40 Uponor composite press elbow MLC40-40 45° 5 pcs
1046389 50 Uponor composite press elbow MLC50-50 45° 3 pcs
EEI-Int-MLC-01.12 9
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite tee
Uponor composite press tee MLC up to 32Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety. Press without bevel.
Item no. d [mm] Description unit
1022718 16 Uponor composite tee MLC 16-16-16 10 pcs
1022719 20 Uponor composite tee MLC 20-20-20 10 pcs
1022720 25 Uponor composite tee MLC 25-25-25 5 pcs
1022721 32 Uponor composite tee MLC 32-32-32 5 pcs
Uponor composite press tee MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety.
Item no. d [mm] Description unit
1046390 40 Uponor composite press tee MLC 40-40-40 5 pcs
1046391 50 Uponor composite press tee MLC 50-50-50 3 pcs
Uponor composite press tee reducer MLC up to 32Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety. Press without bevel.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1022722 16 20 16 Uponor composite tee reduc. MLC 16-20-16 10 pcs
1022723 20 16 16 Uponor composite tee reduc. MLC 20-16-16 10 pcs
1022724 20 16 20 Uponor composite tee reduc. MLC 20-16-20 10 pcs
1022725 20 20 16 Uponor composite tee reduc. MLC 20-20-16 10 pcs
1022726 20 25 20 Uponor composite tee reduc MLC 20-25-20 10 pcs
1022727 25 16 16 Uponor composite tee reduc. MLC 25-16-16 5 pcs
1022728 25 16 20 Uponor composite tee reduc. MLC 25-16-20 5 pcs
1022729 25 16 25 Uponor composite tee reduc. MLC 25-16-25 5 pcs
1022730 25 20 20 Uponor composite tee reduc. MLC 25-20-20 5 pcs
1022731 25 20 25 Uponor composite tee reduc. MLC 25-20-25 5 pcs
1022732 32 16 32 Uponor composite tee reduc. MLC 32-16-32 5 pcs
1022733 32 20 32 Uponor composite tee reduc. MLC 32-20-32 5 pcs
1022734 32 25 25 Uponor composite tee reduc. MLC 32-25-25 5 pcs
1022735 32 25 32 Uponor composite tee reduc. MLC 32-25-32 5 pcs
EEI-Int-MLC-01.1210
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite tee
Uponor composite press tee reducer MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1046392 40 20 40 Uponor composite press tee reducer MLC40-20-40 5 pcs
1046393 40 25 32 Uponor composite press tee reducer MLC40-25-32 5 pcs
1046394 40 25 40 Uponor composite press tee reducer MLC40-25-40 5 pcs
1046395 40 32 32 Uponor composite press tee reducer MLC40-32-32 5 pcs
1046396 40 32 40 Uponor composite press tee reducer MLC40-32-40 5 pcs
1046397 50 25 40 Uponor composite press tee reducer MLC50-25-40 3 pcs
1046398 50 25 50 Uponor composite press tee reducer MLC50-25-50 3 pcs
1046399 50 32 50 Uponor composite press tee reducer MLC50-32-50 3 pcs
1046400 50 40 50 Uponor composite press tee reducer MLC50-40-50 3 pcs
Uponor composite coupling
Uponor composite press coupling MLC up to 32Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety. Press without bevel.
Item no. d [mm] Description unit
1022736 16 Uponor composite coupling MLC 16-16 10 pcs
1022737 20 Uponor composite coupling MLC 20-20 10 pcs
1022738 25 Uponor composite coupling MLC 25-25 5 pcs
1022739 32 Uponor composite coupling MLC 32-32 5 pcs
Uponor composite press coupling MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety.
Item no. d [mm] Description unit
1046401 40 Uponor composite press coupling MLC40-40 5 pcs
1046402 50 Uponor composite press coupling MLC50-50 3 pcs
EEI-Int-MLC-01.12 11
Uponor MLCP plumbing system > Uponor composite press fi ttings MLC 16-32 mm
Uponor composite coupling
Uponor composite press coupling reducer MLC up to 32Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety. Press without bevel.
Item no. d [mm] d1 [mm] Description unit
1022740 20 16 Uponor composite reducer MLC 20-16 10 pcs
1022741 25 16 Uponor composite reducer MLC 25-16 5 pcs
1022742 25 20 Uponor composite reducer MLC 25-20 5 pcs
1022743 32 25 Uponor composite reducer MLC 32-25 5 pcs
Uponor composite press coupling reducer MLC 40-50Made of PPSU with fi xed press sleeve made of stainless steel, stop ring and test safety.
Item no. d [mm] d1 [mm] Description unit
1046403 40 25 Uponor composite press coupling RED. MLC40-25 5 pcs
1046404 40 32 Uponor composite press coupling RED. MLC40-32 5 pcs
1046405 50 32 Uponor composite press coupling RED. MLC50-32 3 pcs
1046406 50 40 Uponor composite press coupling RED. MLC50-40 3 pcs
EEI-Int-MLC-01.1212
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass connection
Uponor press male connection MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT ["] Description unit
1014525 16 R 1/2 Uponor press male con. MLC 16-1/2 10 pcs
1014534 16 R 3/4 Uponor press male con. MLC 16-3/4 10 pcs
1014540 18 R 1/2 Uponor press male con. MLC 18-1/2 10 pcs
1014546 18 R 3/4 Uponor press male con. MLC 18-3/4 10 pcs
1014561 20 R 1/2 Uponor press male con. MLC 20-1/2 10 pcs
1014564 20 R 3/4 Uponor press male con. MLC 20-3/4 10 pcs
1014567 20 R 1 Uponor press male con. MLC 20-1 10 pcs
1014589 25 R 3/4 Uponor press male con. MLC 25-3/4 5 pcs
1014592 25 R 1 Uponor press male con. MLC 25-1 5 pcs
1014610 32 R 1 Uponor press male con. MLC 32-1 5 pcs
1014613 32 R 11/4 Uponor press male con. MLC 32-11/4 5 pcs
Uponor press female connection MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1014536 16 Rp 1/2 Uponor press female con. MLC 16-1/2 10 pcs
1014549 18 Rp 1/2 Uponor press female con. MLC 18-1/2 10 pcs
1014551 18 Rp 3/4 Uponor press female con. MLC 18-3/4 10 pcs
1014574 20 Rp 1/2 Uponor press female con. MLC 20-1/2 10 pcs
1014577 20 Rp 3/4 Uponor press female con. MLC 20-3/4 10 pcs
1014580 20 Rp 1 Uponor press female con. MLC 20-1 10 pcs
1014599 25 Rp 3/4 Uponor press female con. MLC 25-3/4 5 pcs
1014602 25 Rp 1 Uponor press female con. MLC 25-1 5 pcs
1014618 32 Rp 1 Uponor press female con. MLC 32-1 5 pcs
1014621 32 Rp 11/4 Uponor press female con. MLC 32-11/4 5 pcs
Uponor press male connection MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT ["] Description unit
1046901 40 R 11/4 Uponor press male con. MLC 40-11/4 5 pcs
1046902 40 R 11/2 Uponor press male con. MLC 40-11/2 5 pcs
1046905 50 R 11/2 Uponor press male con. MLC 50-11/2 3 pcs
1046906 50 R 2 Uponor press male con. MLC 50-2 3 pcs
EEI-Int-MLC-01.12 13
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass connection
Uponor press female connection MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1046903 40 Rp 11/4 Uponor press female con. MLC 40-11/4 5 pcs
1046904 40 Rp 11/2 Uponor press female con. MLC 40-11/2 5 pcs
1046907 50 Rp 11/2 Uponor press female con. MLC 50-11/2 3 pcs
Uponor brass elbow
Uponor press elbow MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] Description unit
1014679 16 Uponor press elbow MLC 16-16 10 pcs
1014704 18 Uponor press elbow MLC 18-18 10 pcs
1014724 20 Uponor press elbow MLC 20-20 10 pcs
1014746 25 Uponor press elbow MLC 25-25 5 pcs
1014765 32 Uponor press elbow MLC 32-32 5 pcs
Uponor press male elbow MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT ["] Description unit
1014686 16 R 1/2 Uponor press male elbow MLC 16-1/2 10 pcs
1014709 18 R 1/2 Uponor press male elbow MLC 18-1/2 10 pcs
1014713 18 R 3/4 Uponor press male elbow MLC 18-3/4 10 pcs
1014729 20 R 1/2 Uponor press male elbow MLC 20-1/2 10 pcs
1014732 20 R 3/4 Uponor press male elbow MLC 20-3/4 10 pcs
1014751 25 R 3/4 Uponor press male elbow MLC 25-3/4 5 pcs
1014755 25 R 1 Uponor press male elbow MLC 25-1 5 pcs
1014770 32 R 1 Uponor press male elbow MLC 32-1 5 pcs
EEI-Int-MLC-01.1214
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass elbow
Uponor press female elbow MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1014692 16 Rp 1/2 Uponor press female elbow MLC 16-1/2 10 pcs
1014716 18 Rp 1/2 Uponor press female elbow MLC 18-1/2 10 pcs
1014736 20 Rp 1/2 Uponor press female elbow MLC 20-1/2 10 pcs
1014739 20 Rp 3/4 Uponor press female elbow MLC 20-3/4 10 pcs
1014757 25 Rp 3/4 Uponor press female elbow MLC 25-3/4 5 pcs
1014761 25 Rp 1 Uponor press female elbow MLC 25-1 5 pcs
1014774 32 Rp 1 Uponor press female elbow MLC 32-1 5 pcs
Uponor press elbow 45° MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] Description unit
1014812 25 Uponor press elbow 45° MLC 25-25 5 pcs
1014825 32 Uponor press elbow 45° MLC 32-32 5 pcs
Uponor press elbow MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety.
Item no. d [mm] Description unit
1046908 40 Uponor press elbow MLC 40-40 5 pcs
1046911 50 Uponor press elbow MLC 50-50 3 pcs
Uponor press male elbow MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT ["] Description unit
1046909 40 R 11/4 Uponor press male elbow MLC 40-11/4 5 pcs
EEI-Int-MLC-01.12 15
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass elbow
Uponor press female elbow MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1046910 40 Rp 11/2 Uponor press female elbow MLC 40-11/2 5 pcs
1046912 50 Rp 11/2 Uponor press female elbow MLC 50-11/2 3 pcs
Uponor press elbow 45° MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety.
Item no. d [mm] Description unit
1046913 40 Uponor press elbow 45° MLC 40-40 5 pcs
1046914 50 Uponor press elbow 45° MLC 50-50 3 pcs
Uponor brass coupling
Uponor press coupling MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] Description unit
1015154 14 Uponor press coupling MLC 14-14 10 pcs
1015164 16 Uponor press coupling MLC 16-16 10 pcs
1015176 18 Uponor press coupling MLC 18-18 10 pcs
1015187 20 Uponor press coupling MLC 20-20 10 pcs
1015205 25 Uponor press coupling MLC 25-25 5 pcs
1015219 32 Uponor press coupling MLC 32-32 5 pcs
Uponor press reducer MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] d1 [mm] Description unit
1015172 18 16 Uponor press reducer MLC 18-16 10 pcs
1015179 20 16 Uponor press reducer MLC 20-16 10 pcs
1015185 20 18 Uponor press reducer MLC 20-18 10 pcs
1015194 25 16 Uponor press reducer MLC 25-16 5 pcs
1015199 25 18 Uponor press reducer MLC 25-18 5 pcs
1015202 25 20 Uponor press reducer MLC 25-20 5 pcs
1015215 32 20 Uponor press reducer MLC 32-20 5 pcs
1015217 32 25 Uponor press reducer MLC 32-25 5 pcs
EEI-Int-MLC-01.1216
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass coupling
Uponor press reducer MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety.
Item no. d [mm] d1 [mm] Description unit
1046930 40 25 Uponor press reducer MLC 40-25 5 pcs
1046931 40 32 Uponor press reducer MLC 40-32 5 pcs
1046933 50 32 Uponor press reducer MLC 50-32 3 pcs
1046934 50 40 Uponor press reducer MLC 50-40 3 pcs
Uponor press coupling MLC 40-50For connection of Uponor MLC pipes, made of tin-plated brass with fi xed press sleeve.
Item no. d [mm] Description unit
1046932 40 Uponor press coupling MLC 40-40 5 pcs
1046935 50 Uponor press coupling MLC 50-50 3 pcs
Uponor brass tee
Uponor press tee MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] Description unit
1014918 16 Uponor press tee MLC 16-16-16 10 pcs
1014944 18 Uponor press tee MLC 18-18-18 10 pcs
1014976 20 Uponor press tee MLC 20-20-20 10 pcs
1015028 25 Uponor press tee MLC 25-25-25 5 pcs
1015073 32 Uponor press tee MLC 32-32-32 5 pcs
EEI-Int-MLC-01.12 17
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass tee
Uponor press tee reducer MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1014923 16 20 16 Uponor press tee reducer MLC 16-20-16 10 pcs
1014935 18 16 16 Uponor press tee reducer MLC 18-16-16 10 pcs
1014938 18 16 18 Uponor press tee reducer MLC 18-16-18 10 pcs
1014941 18 18 16 Uponor press tee reducer MLC 18-18-16 10 pcs
1014957 20 16 16 Uponor press tee reducer MLC 20-16-16 10 pcs
1014961 20 16 20 Uponor press tee reducer MLC 20-16-20 10 pcs
1014966 20 18 18 Uponor press tee reducer MLC 20-18-18 10 pcs
1014968 20 18 20 Uponor press tee reducer MLC 20-18-20 10 pcs
1014970 20 20 16 Uponor press tee reducer MLC 20-20-16 10 pcs
1014974 20 20 18 Uponor press tee reducer MLC 20-20-18 10 pcs
1014981 20 25 16 Uponor press tee reducer MLC 20-25-16 10 pcs
1014983 20 25 20 Uponor press tee reducer MLC 20-25-20 10 pcs
1014996 25 16 16 Uponor press tee reducer MLC 25-16-16 5 pcs
1015000 25 16 20 Uponor press tee reducer MLC 25-16-20 5 pcs
1015002 25 16 25 Uponor press tee reducer MLC 25-16-25 5 pcs
1015007 25 18 18 Uponor press tee reducer MLC 25-18-18 5 pcs
1015011 25 18 25 Uponor press tee reducer MLC 25-18-25 5 pcs
1015015 25 20 16 Uponor press tee reducer MLC 25-20-16 5 pcs
1015017 25 20 20 Uponor press tee reducer MLC 25-20-20 5 pcs
1015021 25 20 25 Uponor press tee reducer MLC 25-20-25 5 pcs
1015025 25 25 16 Uponor press tee reducer MLC 25-25-16 5 pcs
1015033 25 32 25 Uponor press tee reducer MLC 25-32-25 5 pcs
1015053 32 16 32 Uponor press tee reducer MLC 32-16-32 5 pcs
1015057 32 18 32 Uponor press tee reducer MLC 32-18-32 5 pcs
1015060 32 20 32 Uponor press tee reducer MLC 32-20-32 5 pcs
1015064 32 25 25 Uponor press tee reducer MLC 32-25-25 5 pcs
1015068 32 25 32 Uponor press tee reducer MLC 32-25-32 5 pcs
Uponor press male tee MLCMade of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Male thread acc.to DIN EN 10226-1 for sealing in.
Item no. d [mm] MT ["] d1 [mm] Description unit
1014927 16 R 1/2 16 Uponor press male tee MLC 16-1/2-16 10 pcs
1015038 25 R 3/4 25 Uponor press male tee MLC 25-3/4-25 5 pcs
1015082 32 R 3/4 32 Uponor press male tee MLC 32-3/4-32 5 pcs
EEI-Int-MLC-01.1218
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass tee
Uponor press female tee MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] d1 [mm] Description unit
1014931 16 Rp 1/2 16 Uponor press female tee MLC 16-1/2-16 10 pcs
1014954 18 Rp 1/2 18 Uponor press female tee MLC 18-1/2-18 10 pcs
1014987 20 Rp 1/2 20 Uponor press female tee MLC 20-1/2-20 10 pcs
1014991 20 Rp 3/4 20 Uponor press female tee MLC 20-3/4-20 10 pcs
1015044 25 Rp 1/2 25 Uponor press female tee MLC 25-1/2-25 5 pcs
1015048 25 Rp 3/4 25 Uponor press female tee MLC 25-3/4-25 5 pcs
1015088 32 Rp 1/2 32 Uponor press female tee MLC 32-1/2-32 5 pcs
1015091 32 Rp 3/4 32 Uponor press female tee MLC 32-3/4-32 5 pcs
Uponor press tee reducer MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1046915 32 50 32 Uponor press tee reducer MLC 32-50-32 3 pcs
1046916 40 20 40 Uponor press tee reducer MLC 40-20-40 5 pcs
1046917 40 25 32 Uponor press tee reducer MLC 40-25-32 5 pcs
1046918 40 25 40 Uponor press tee reducer MLC 40-25-40 5 pcs
1046919 40 32 32 Uponor press tee reducer MLC 40-32-32 5 pcs
1046920 40 32 40 Uponor press tee reducer MLC 40-32-40 5 pcs
1046924 50 25 40 Uponor press tee reducer MLC 50-25-40 3 pcs
1046925 50 25 50 Uponor press tee reducer MLC 50-25-50 3 pcs
1046926 50 32 50 Uponor press tee reducer MLC 50-32-50 3 pcs
1046927 50 40 50 Uponor press tee reducer MLC 50-40-50 3 pcs
Uponor press tee MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety.
Item no. d [mm] Description unit
1046921 40 Uponor press tee MLC 40-40-40 5 pcs
1046928 50 Uponor press tee MLC 50-50-50 3 pcs
EEI-Int-MLC-01.12 19
Uponor MLCP plumbing system > Uponor brass press fi ttings MLC up to 50 mm
Uponor brass tee
Uponor press female tee MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, colour code and test safety. Cylindrical female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] d1 [mm] Description unit
1046922 40 Rp 1/2 40 Uponor press female tee MLC 40-1/2-40 5 pcs
1046923 40 Rp 3/4 40 Uponor press female tee MLC 40-3/4-40 5 pcs
1046929 50 Rp 1 50 Uponor press female tee MLC 50-1-50 3 pcs
Uponor brass screw connection
Uponor press connection swivel MLC up to 32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Releasable screw connector for connection to on-wall fi ttings, fi lters and shut-off valves. Thread acc. to DIN EN ISO 228-1.
Item no. d [mm] FT ["] Description unit
1015270 16 G 1/2 Uponor press con. swivel MLC 16-1/2FT 10 pcs
1015274 16 G 3/4 Uponor press con. swivel MLC 16-3/4FT 10 pcs
1015277 18 G 1/2 Uponor press con. swivel MLC 18-1/2FT 10 pcs
1015280 18 G 3/4 Uponor press con. swivel MLC 18-3/4FT 10 pcs
1015283 20 G 1/2 Uponor press con. swivel MLC 20-1/2FT 10 pcs
1015286 20 G 3/4 Uponor press con. swivel MLC 20-3/4FT 10 pcs
1015295 25 G 3/4 Uponor press con. swivel MLC 25-3/4FT 5 pcs
1015297 25 G 1 Uponor press con. swivel MLC 25-1FT 5 pcs
1015301 32 G 11/4 Uponor press con. swivel MLC 32-11/4FT 5 pcs
Uponor press connection swivel MLC 40-50Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed indentifi cation, colour code and test safety. Releasable screw connector for connection to on-wall fi ttings, fi lters and shut-off valves. Thread acc. to DIN EN ISO 228-1.
Item no. d [mm] FT ["] Description unit
1046937 40 G 11/2 Uponor press con. swivel MLC 40-11/2FT 5 pcs
1046938 50 G 13/4 Uponor press con. swivel MLC 50-13/4FT 3 pcs
1046939 50 G 2 Uponor press con. swivel MLC 50-2FT 3 pcs
EEI-Int-MLC-01.1220
Uponor MLCP plumbing system > Uponor compression fi ttings MLC up to 25 mm
Uponor compression fi ttings MLC up to 25 mm
Uponor compression adapter MLCOne-piece compression adapter made of brass, union nut nickel plated, inner sleeve made of PPSU and clamp ring made of PA. For connection of Uponor MLC pipes to manifolds. Female thread 1/2" and 3/4" eurocone acc. to DIN EN ISO 228-1.
Item no. d [mm] s [mm] FT ["] Description unit
1013846 16 2.0 G1/2 Uponor compression adapter MLC 16-1/2FT 20 pcs
1013854 18 2.0 G1/2 Uponor compression adapter MLC 18-1/2FT 10 pcs
1013832 20 2.25 G1/2 Uponor compression adapter MLC 20-1/2FT 10 pcs
1013982 14 G3/4 Uponor eurocone compr.adap. MLC 14-3/4FT 10 pcs
1013989 16 2.0 G3/4 Uponor eurocone compr.adap. MLC 16-3/4FT 10 pcs
1013998 18 2.0 G3/4 Uponor eurocone compr.adap. MLC 18-3/4FT 10 pcs
1014004 20 2.25 G3/4 Uponor eurocone compr.adap. MLC 20-3/4FT 10 pcs
1014011 25 2.5 G3/4 Uponor eurocone compr.adap. MLC 25-3/4FT 10 pcs
Uponor compression adapter MLC 1/2"Compression adapter made of brass, union nut and inner sleeve plated. For connection of Uponor MLC pipes to manifolds (e.g. Uponor manifold S, SH). Female thread 1/2" according to DIN EN ISO 228-1. Test safety and no bevelling.
Item no. d [mm] FT ["] Description unit
1058086 16 1/2 Uponor compression adapter MLC 16-1/2FTmetal version 1 pcs
1058087 18 1/2 Uponor compression adapter MLC 18-1/2FTmetal version 1 pcs
1058088 20 1/2 Uponor compression adapter MLC 20-1/2FTmetal version 1 pcs
Uponor compression adapter MLC 3/4" euroconeCompression adapter made of brass, union nut and inner sleeve plated. For connection of Uponor MLC pipes to manifolds (eg. Uponor manifold H). Female thread 3/4" eurocone according to DIN EN ISO 228-1. Test safety and no bevelling.
Item no. d [mm] FT ["] Description unit
1058090 16 3/4 Uponor compression adapter MLC 16-3/4FTeurocone metal version 1 pcs
1058091 18 3/4 Uponor compression adapter MLC 18-3/4FTeurocone metal version 1 pcs
1058092 20 3/4 Uponor compression adapter MLC 20-3/4FTeurocone metal version 1 pcs
1058093 25 3/4 Uponor compression adapter MLC 25-3/4FTeurocone metal version 1 pcs
Uponor compression adapter MLC M22Compression adapter made of brass, union nut and inner sleeve plated. For connection of Uponor MLC pipes to radiator valves similar to Comap and Herz with M22 threads. Test safety and no bevelling.
Item no. d [mm] FT m [-] Description unit
1058094 16 M22 Uponor compression adapter MLC 16-M22metal version 1 pcs
Uponor compression adapter MLC M24Compression adapter made of brass, union nut and inner sleeve plated. For connection of Uponor MLC pipes to radiator valves similar to Oventrop and Heimeier with M24x1,5 threads. Test safety and no bevelling.
Item no. d [mm] FT m [-] Description unit
1058095 16 M24 Uponor compression adapter MLC 16-M24metal version 1 pcs
EEI-Int-MLC-01.12 21
Uponor MLCP plumbing system > Uponor compression fi ttings MLC up to 25 mm
Uponor compression fi ttings MLC up to 25 mm
Uponor compression adapter MLC for flushing boxCompression adapter made of brass, union nut and inner sleeve plated. For connection of Uponor MLC pipes to in wall fl ushing box Geberit and all MeplaFix R1/2 male threads. Test safety and no bevelling.
Item no. d [mm] FT ["] Description unit
1058097 16 1/2 Uponor compression adapter MLC 16-G1/2fl ushing box Geberit metal version 1 pcs
Uponor coupling nippleMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT ["] Description unit
1013894 1/2 Uponor coupling nipple MLC 1/2MT-1/2MT 20 pcs
Uponor coupling nippleMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT ["] Description unit
1006641 3/4 Uponor eurocone nipple MLC 3/4MT-3/4MT 10 pcs
Uponor conversion nippleMade of tin-plated brass. Female thread acc.to DIN EN 10226-1. Male thread acc.to DIN EN ISO 228-1.
Item no. MT ["] FT ["] Description unit
1013907 1/2 1/2 Uponor nipple 1/2MT-1/2FT 10 pcs
1014143 3/4 3/4 Uponor eurocone nipple 3/4MT-3/4FT 10 pcs
Uponor elbowMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT ["] Description unit
1013914 1/2 Uponor male elbow 1/2 10 pcs
1014145 3/4 Uponor eurocone elbow 3/4MT-3/4MT 10 pcs
EEI-Int-MLC-01.1222
Uponor MLCP plumbing system > Uponor compression fi ttings MLC up to 25 mm
Uponor compression fi ttings MLC up to 25 mm
Uponor conversion elbowMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1. Female thread acc.to DIN EN 10226-1.
Item no. MT ["] FT ["] Description unit
1013932 1/2 1/2 Uponor conversion elbow 1/2MT-1/2FT 10 pcs
Uponor teeMade of tin-plated brass. Male thread acc.to DIN EN ISO 228-1.
Item no. MT ["] Description unit
1013946 1/2 Uponor tee 1/2 MT 10 pcs
1014147 3/4 Uponor tee eurocone 3/4 MT 5 pcs
Uponor compression tap elbow MLCMade of tin-plated brass, for on wall installation or attachment with rotation protection to the MLCP mounting angles and plate. Female thread acc. to DIN EN 10226-1. Male thread acc. to DIN EN ISO 228-1.
Item no. MT ["] FT ["] Description unit
1015559 1/2 Rp 1/2 Uponor MLC compression tap elbow1/2FT-1/2MT 10 pcs
EEI-Int-MLC-01.12 23
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
EEI-Int-MLC-01.1224
The Uponor MLCP Riser System: unique and innovative
Fewer parts, greater fl exibilityWhile up to 300 diff erent compo-nents are necessary for convention-al 63-110 mm plumbing systems, the Uponor MLCP Riser System means you’ll need no more than 27. Just imagine how much simpler planning would be if you only had to think about 27 components.
All conceivable combinationsThe Uponor MLCP Riser System hasa modular design. The individual components are perfectly coordinated. This means you can plan all conceivable combinations - both conventional, standard solutions and ground-breaking solutions for unusual requirements.There are no restrictionson your planning. This innovativeconnection system gives you greater scope for creative thinking.
Pressing at the workbenchNo extra tools requiredConnecting without toolsMake corrections possibleNo multiple reductions
Tee branch
Transition on demand Transition on demand Transition on demand
RS pressadapter
RS pressadapter
RS coupling
RS male thread adapter
RS press adapter25-32 MLC
RS press adapter 25-32 MLC
RS press adapter
RS couplingRS coupling
RS reducer RS3/RS2
RS press adapter
RS pressadapter
RS elbow 90°RS pressadapter
RS pressadapter
RS pressadapter25-32 MLC
RS reducerRS3/RS2
RS tee
Eibow 90° and 45°
click click Press
RS2 base PartRS2 adapter
RS2/RS3 reducer
RS3 adapterRS3 base PartRS2&RS3 Spacers
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
EEI-Int-MLC-01.12 25
The Uponor MLCP Riser System demonstrates impressive strengths in a wide range of applications
Build up manifolds in a fast and secure way
New concept of connection The most variability
Build up manifolds in a fast and secure way
Easy and fast layer change in distribution lines
Pipe elbows in every angle you need
Fewer weak points, better safetyIn conventional pipe systems, every connection is a potential weak point. However, Uponor has always worked to provide better solutions. The new Uponor MLCP Riser System once again marks an improvement in the quality and reliability of plumbing systems, simply because of the reduction in the number of components to be installed. Unique, innovative lock pin connection technology also makes installation much easier, preventing mistakes.
Easy and fast to installSaves time in installationThe right distance at the right pointPerfect in renovation business
The spacers RS 2 and RS 3 in the Uponor MLCP Riser System is made to solve three requirements on the building site with just one piece. Connection of diff erent layers in distribution lines, pipe for tee manifolds and fi xing point.
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
Uponor Riser system fi ttings MLC 63 -110 mm
Uponor RS couplingMade of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 2 lock pins.
Item no. Type [-] Description unit
1029144 RS 2 Uponor Plated RS 2 COUPLING 2 pcs
1029145 RS 3 Uponor Plated RS 3 COUPLING 2 pcs
Uponor RS teeMade of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 3 lock pins.
Item no. Type [-] Description unit
1029142 RS 2 Uponor Plated RS 2 TEE 1 pcs
1029143 RS 3 Uponor Plated RS 3 TEE 1 pcs
Uponor RS elbowMade of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 2 lock pins.
Item no. Type [-] Description unit
1029138 RS 2 Uponor Plated RS 2 ELBOW 1 pcs
1029139 RS 3 Uponor Plated RS 3 ELBOW 1 pcs
Uponor RS elbow 45°Made of tin-plated brass. Base part for all RS 2 or RS 3 inserts including 2 lock pins.
Item no. Type [-] Description unit
1029140 RS 2 Uponor Plated RS 2 ELBOW 45° 1 pcs
1029141 RS 3 Uponor Plated RS 3 ELBOW 45° 1 pcs
EEI-Int-MLC-01.1226
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
Uponor Riser system fi ttings MLC 63 -110 mm
Uponor RS reducerMade of tin-plated brass. Reducer from RS 3 to RS 2 including 1 lock pin.
Item no. Type [-] Description unit
1029146 Uponor Plated RS 3 / RS 2 REDUCER 2 pcs
Uponor RS press adapter MLC 25-32Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. Fits to all RS 2 base parts.
Item no. Type [-] d [mm] Description unit
1029121 RS 2 25 Uponor RS 2 press adapter MLC 25 1 pcs
1029122 RS 2 32 Uponor RS 2 press adapter MLC 32 1 pcs
Uponor RS press adapter MLC 40-110Made of tin-plated brass. Press sleeve made of stainless steel fi xed with stop ring segment as stop for pressing jaw. Fits to all RS 2 or RS 3 base parts.
Item no. Type [-] d [mm] Description unit
1046940 RS 2 40 Uponor RS 2 press adapter MLC 40 1 pcs
1046941 RS 2 50 Uponor RS 2 press adapter MLC 50 1 pcs
1029125 RS 2 63 Uponor RS 2 press adapter MLC 63 1 pcs
1029126 RS 2 75 Uponor RS 2 press adapter MLC 75 1 pcs
1029127 RS 3 90 Uponor RS 3 press adapter MLC 90 1 pcs
1029128 RS 3 110 Uponor RS 3 press adapter MLC 110 1 pcs
Uponor RS female adapterMade of tin-plated brass. Fits to all RS 2 or RS 3 base parts. Female thread acc. to DIN EN 10 226-1.
Item no. Type [-] FT ["] Description unit
1029134 RS 2 Rp 1 Uponor Plated RS 2 FEMALE ADAPTER 1 G 1 pcs
1029135 RS 2 Rp 2 Uponor Plated RS 2 FEMALE ADAPTER 2 G 1 pcs
1029136 RS 2 Rp 2 1/2 Uponor Plated RS 2 FEMALE ADAPTER 21/2 G 1 pcs
1029137 RS 3 Rp 3 Uponor Plated RS 3 FEMALE ADAPTER 3 G 1 pcs
EEI-Int-MLC-01.12 27
RS 3 / RS 2
Uponor MLCP plumbing system > Uponor Riser system fi ttings MLC 63 -110 mm
Uponor Riser system fi ttings MLC 63 -110 mm
Uponor RS male adapterMade of tin-plated brass. Fits to all RS 2 or RS 3 base parts. Male thread acc. to DIN EN 10 226-1 for sealing in.
Item no. Type [-] MT ["] Description unit
1029131 RS 2 R 2 Uponor Plated RS 2 MALE ADAPTER 2 G 1 pcs
1029132 RS 2 R 2 1/2 Uponor Plated RS 2 MALE ADAPTER 2 1/2 G 1 pcs
1029133 RS 3 R 3 Uponor Plated RS 3 MALE ADAPTER 3 G 1 pcs
Uponor RS flangeMade of tin-plated brass. Fits to all RS 3 base parts. Flange PN 16. Bolt circle with 8 holes.
Item no. Type [-] DN [mm] Description unit
1029129 RS 3 80 Uponor Plated RS 3 FLANGE ADAPTER DN 80 1 pcs
1029130 RS 3 100 Uponor Plated RS 3 FLANGE ADAPTER DN 100 1 pcs
Uponor press connection swivel MLCMade of tin-plated brass, with fi xed press sleeve, stop ring. Releasable screw connector for connection to on-wall fi ttings, fi lters and shut-off valves. Thread acc. to DIN EN ISO 228-1.
Item no. d [mm] FT ["] Description unit
1029147 63 G 2 3/8 Uponor press con. swivel MLC 63-G2 3/8 1 pcs
Uponor RS Spacer long versionMade of tin-plated brass. Spacer to connect RS base parts of equal dimensions e.g to create T-manifold or shift in distribution lines.
Item no. Type [-] l [mm] Description unit
1046477 RS 2 130 Uponor Plated RS 2 SPACER 130MM 1 pcs
1046478 RS 3 210 Uponor Plated RS 3 SPACER 210MM 1 pcs
Uponor RS Spacer 5 mmMade of tin-plated brass. Spacer to connect RS base parts of equal dimensions.
Item no. Type [-] l [mm] Description unit
1046750 RS 2 5 Uponor Plated RS 2 SPACER 5MM 1 pcs
1046751 RS 3 5 Uponor Plated RS 3 SPACER 5MM 1 pcs
EEI-Int-MLC-01.1228
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor brass tap connection
Uponor press tap elbow MLCMade of tin-plated brass, for on wall installation or attachment with rotation protection to the MLCP mounting angles and plates. Fixed press sleeve, stop ring, pressed identifi cation, colour code, test safety included. Press without bevel. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1015455 16 Rp 1/2 Uponor MLC press tap elbow 16-1/2FT 10 pcs
1015486 18 Rp 1/2 Uponor MLC press tap elbow 18-1/2FT 10 pcs
1015512 20 Rp 1/2 Uponor MLC press tap elbow 20-1/2FT 10 pcs
1015515 20 Rp 3/4 Uponor MLC press tap elbow 20-3/4FT 5 pcs
1048471 25 Rp 3/4 Uponor MLC press tap elbow 25-3/4FT 5 pcs
Uponor press tap elbow MLC longMade of tin-plated brass, for on wall installation or attachment with rotation protection to the MLCP mounting angles and plates. Fixed press sleeve, stop ring, pressed identifi cation, colour code, test safety included. Press without bevel. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1015345 16 Rp 1/2 Uponor MLC press tap elbow 16-1/2FT long 10 pcs
1057835 20 Rp 1/2 Uponor MLC press tap elbow 20-1/2FT long 10 pcs
Uponor press tap elbow MLC twinMade of tin-plated brass, for on wall installation or attachment with rotation protection to the MLCP mounting angles and plates. Fixed press sleeve, stop ring, pressed identifi cation, colour code, test safety included. Press without bevel. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] d1 [mm] Description unit
1057836 16 Rp 1/2 16 Uponor MLC press tap twin elbow 16-1/2FT90° long 10 pcs
1057837 18 Rp 1/2 18 Uponor MLC press tap twin elbow 18-1/2FT90° long 10 pcs
1057838 20 Rp 1/2 20 Uponor MLC press tap twin elbow 20-1/2FT90° long 10 pcs
Uponor mounting plateFor the installation of Uponor press tap connection elbow MLC. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes and slots for easy attachment. Made of galvanized steel.
Item no. Description unit
1057840 75/150 Uponor mounting plate 75/150mm 5 pcs
EEI-Int-MLC-01.12 29
gauge [mm]
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor brass tap connection
Uponor mounting angleFor the installation of Uponor press tap connection elbow MLC. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes and slots for easy attachment. Made of galvanized steel.
Item no. Description unit
1057841 80 Uponor mounting angle 80mm 5 pcs
1057839 100 Uponor mounting angle 100mm 5 pcs
Uponor mounting angleFor the installation of Uponor press tap connection elbow MLC. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes and slots for easy attachment. Made of galvanized steel.
Item no. Description unit
1057842 75/150 Uponor mounting angle 75/150mm 5 pcs
Uponor mounting angleFor the installation of Uponor press tap connection elbow MLC. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes and slots for easy attachment. Made of galvanized steel.
Item no. Description unit
1057843 Uponor single mounting angle 5 pcs
Uponor mounting trackFor the installation of Uponor press tap connection elbow MLC. Positioning of the connections in the given raster. Plastic pins and loss protected screws M6x12 acc. DIN 965 included. With holes and slots for easy attachment. Made of galvanized steel.
Item no. Description unit
1057844 2000 Uponor mounting track, length 2000mmin 75mm mounting steps 10 pcs
Uponor waste water connection setWaste waster connection set for mounting plates and angles. Contains of PE-HD waste water elbow DN 50, lip seal and fi xing accessories.
Item no. Description unit
1057845 Uponor waste water connection set DN 50 5 pcs
EEI-Int-MLC-01.1230
gauge [mm]
gauge [mm]
gauge [mm]
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor brass tap connection
Uponor sound protection setSuitable for installation to Uponor press tap connection elbows MLC 16-1/2FT, 18-1/2FT and 20-1/2FT. Made of EPDM. Sound protection acc. DIN 4109.
Item no. Description unit
1057846 Uponor sound protection set for twoUponor press tap connection elbows MLC 1 set
Uponor pins and screwsPins and screws for mounting plates, angles and tracks.
Item no. Description unit
1057847 Uponor pins and screwsfor mounting track 10 pcs 10 pcs
Uponor brass wall penetration
Uponor press wall penetration MLCFor twist-proof attachment. Made of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. For lead-through through walls. Female thread acc. to DIN EN 10226-1. Dimensions of attachment plate (H x W x D) 100 x 50 x 2 mm. Hole circle diameter 33 mm.
Item no. d [mm] FT ["] Description unit
1015572 16 Rp 1/2 Uponor press wall pene. MLC 16- 1/2FTstraight 10 pcs
Uponor press wall penetration MLC, elbowFor twist-proof attachment. Made of tin-plated brass,with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. For lead-through through walls. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1015460 16 Rp 1/2 Uponor press wall pene. elb.MLC 16-1/2FTelbow, for lightweight constr. 5 pcs
EEI-Int-MLC-01.12 31
Uponor MLCP plumbing system > Uponor tap water connections for MLC
Uponor UPS connection
Uponor press UPS elbow MLC, planeMade of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Elbow for connecting to in-wall mounted lavatory fl ush-water tank. Female thread acc. to DIN EN 10226-1.
Item no. d [mm] FT ["] Description unit
1015636 16 Rp 1/2 Uponor press UPS elbow MLC 16-1/2FT, plplane 5 pcs
EEI-Int-MLC-01.1232
Uponor MLCP plumbing system > Uponor tap water manifolds and accessories
Uponor brass manifolds and accessories
Uponor manifold SMade of tin-plated brass, with connection 1" for male thread or female thread, outlets 1/2" male thread fi ts to Uponor compression adapter.
Item no. outlets [-] l [mm] Description unit
1014107 2 121 Uponor manifold S 2 way 1 pcs
1014111 3 171 Uponor manifold S 3 way 1 pcs
1014109 4 221 Uponor manifold S 4 way 1 pcs
Uponor manifold SHMade of tin-plated brass. With connection 1" for male thread or female thread, outlets 1/2" male thread and valves to close each outlet separate. Corresponding compression adapters for connecting the Uponor MLC pipes from the basic assortment.
Item no. outlets [-] l [mm] Description unit
1014137 2 95 Uponor manifold SH 2 way 1 pcs
1014138 3 130 Uponor manifold SH 3 way 1 pcs
1014139 4 165 Uponor manifold SH 4 way 1 pcs
Uponor manifold S/SH capMade of plated brass, including seal for the manifold S/SH.
Item no. FT ["] Description unit
1014120 Rp1/2 Uponor manifold S/SH cap 1/2FT 20 pcs
1014121 Rp1 Uponor manifold S/SH cap 1FT 20 pcs
Uponor manifold S/SH plugMade of plated brass, for manifold S/SH.
Item no. MT ["] Description unit
1014123 R 1 Uponor manifold S/SH plug 1MT 20 pcs
Uponor manifold S bracketMade of galvanized steel, for the sound protected attachment of the manifolds S. Can be used in the Uponor manifold cabinet.
Item no. Description unit
1014117 Uponor manifold S bracket 1 pcs
EEI-Int-MLC-01.12 33
Uponor MLCP plumbing system > Uponor tap water manifolds and accessories
Uponor brass manifolds and accessories
Uponor manifold SH bracketMade of galvanized steel, for the attachment of the manifolds SH. Can be used in the Uponor manifold cabinet.
Item no. Description unit
1045451 Uponor manifold SH bracket 3/4" and 1" 1 set
EEI-Int-MLC-01.1234
Uponor MLCP plumbing system > Uponor radiator connection fi ttings for MLC
Uponor press connection
Uponor radiant connection pipeMade of coated copper pipe 15 x 1 mm with self sealing thread for the connection to radiator. Fits to all Uponor press tap elbow MLC, press tap wall plate MLC and press female connection 1/2" MLC. Connection to the radiator with the Uponor eurocone compression adapter Cu.
Item no. d [mm] MT1 ["] l [mm] Description unit
1015425 Cu 15 R1/2 370 Uponor radiant con. 1/2MT-15Cu, 350 20 pcs
Uponor press elbow MLCMade of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. With copper pipe 15 x 1 mm, plated. The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Item no. d [mm] l1 [mm] Description unit
1015626 16 365 Uponor press con. elbow MLC 16 L 35015CU 20 pcs
1015631 16 1115 Uponor press con. elbow MLC 16 L110015CU 20 pcs
1015643 18 365 Uponor press con. elbow MLC 18 L 35015CU 20 pcs
Uponor press connection tee MLCMade of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel. With cranked copper pipe 15 x 1 mm, plated. The connection of the plated copper pipe 15 x 1 mm to the radiator can be made with the Uponor clamp compression adapter Cu (Item-No. 1013830).
Item no. d [mm] l1 [mm] Description unit
1015628 16 351 Uponor press con. tee MLC 16-16 L 35015CU 20 pcs
1015653 20 354 Uponor press con. tee MLC 20-20 L 35015CU 20 pcs
Uponor radiator connection adapters
Uponor eurocone compression adapter CuWith 3/4FT eurocone, elastically sealing, for the connection of the coated copper pipe 15 x 1 mm of the Uponor press connection elbow, Uponor press connection tee to the tap battery, radiator or Uponor radiator connection adapter with 3/4FT eurocone. Coated brass union nut, brass clamp ring blank and sealing cone made of EPDM. Ribbed union nut with wrench size 30.
Item no. d [mm] FT ["] Description unit
1013830 Cu 15 G3/4 Uponor eurocone adapter G3/4-15CU 10 pcs
EEI-Int-MLC-01.12 35
Uponor MLCP plumbing system > Uponor radiator connection fi ttings for MLC
Uponor radiator connection adapters
Uponor radiator connection adapterMade of coated brass, self-sealing. For the connection of radiators with 1/2 female thread connectors, 3/4 male thread eurocone for the connection of Cu-pipe, 15 x 1 mm, with clamp compression adapter.
Item no. MT ["] MT1 ["] Description unit
1013906 R1/2 R3/4 Uponor radiator con. adapt. 1/2MT-3/4MT 10 pcs
Uponor connection set Danfoss MLCMade of coated brass, pressure screw with male thread, with inner sleeve and clamp ring, fi t to Danfoss radiator valves with female thread. O-Ring, blue, made of EPDM.
Item no. d [mm] MT ["] Description unit
1013970 16 R1/2 Uponor con. set Danfoss 16-1/2MT 20 pcs
Uponor connection set Heimeier MLCMade of coated brass, pressure screw with male thread, with inner sleeve and clamp ring, fi t to Heimeier radiator valves with female thread. O-Ring, grey, made of EPDM.
Item no. d [mm] MT ["] Description unit
1013978 16 R1/2 Uponor con. set Heimeier 16-1/2MT 20 pcs
Uponor crossing fi tting
Uponor press crossing MLCFor cross-over-free connection of a radiator on the raw fl oor, made of coated brass, with fi xed press sleeves, incl. insulation box, consisting of upper and lower part made of EPP (expanded polypropylene) with 13 mm insulation layer (corresponds to 50 % insulation in compliance with EnEV), WLG 035. Meets EnEV requirements in respect of pipe cross-overs and wall penetrations! Dimensions of insulation box (Length x Width x Height): 115 x 115 x 55 mm.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1015634 16 16 16 Uponor press crossing MLC 16-16-16 1 pcs
1015661 20 16 20 Uponor press crossing MLC 20-16-20 1 pcs
1015659 20 16 16 Uponor press crossing MLC 20-16-16 1 pcs
1015663 20 20 20 Uponor press crossing MLC 20-20-20 1 pcs
EEI-Int-MLC-01.1236
Uponor MLCP plumbing system > Uponor radiator connection fi ttings for MLC
Uponor radiator connection units
Uponor radiator connection block MLCMade of polystyrene with removable protective cap (WLG 040). Insulation box, fl ame resistant, B1 acc. to DIN 4102.
Item no. d [mm] l [mm] h [mm] h1 [mm] h2 [mm] w [mm] Description unit
1013134 16 50 260 240 215 100 Uponor radiator con. unit MLC 16, H 215height 215 mm 10 pcs
1007077 16 50 285 265 240 100 Uponor radiator con. unit MLC 16, H 240height 240 mm 10 pcs
EEI-Int-MLC-01.12 37
Uponor MLCP plumbing system > Uponor radiator manifolds
Uponor brass manifold
Uponor manifold HPre-assembled manifold for the distribution of heating water for the radiator connection. The manifold shall be operated with heating water acc. to VDI 2035. Manifold bars made of brass, with fl at-sealing connection 1" female thread including fl at seal, on one side, with 1/2 female thread including plugs for optional connection of a fi ller and emptying tap. Spacing of the several outlets: 50 mm. One air valve for each manifold bar. Colour code for recognizing heating loop supply and/or return fl ow with attachable label for room designation. Heating loop connections 3/4 male threaded eurocone acc. to DIN V 3838 to fi t compression adapters, including plastic holding attachments with sound protection padding. Max. water volume per manifold: 3.5 m3/h (12-fold) Observe tightening torque values!
Item no. outlets [-] l [mm] Description unit
1012877 2 122 Uponor manifold H 2 way l=122 1 pcs
1012878 3 172 Uponor manifold H 3 way l=172 1 pcs
1012879 4 222 Uponor manifold H 4 way l=222 1 pcs
1012880 5 272 Uponor manifold H 5 way l=272 1 pcs
1012881 6 322 Uponor manifold H 6 way l=322 1 pcs
1012882 7 372 Uponor manifold H 7 way l=372 1 pcs
1012883 8 422 Uponor manifold H 8 way l=422 1 pcs
1012884 9 472 Uponor manifold H 9 way l=472 1 pcs
1012885 10 522 Uponor manifold H 10 way l=522 1 pcs
1012886 11 572 Uponor manifold H 11 way l=572 1 pcs
1012887 12 622 Uponor manifold H 12 way l=622 1 pcs
Uponor accessories for radiator manifolds
Uponor ball valveMade of plated brass. With fl at-sealing vertical screw connection 1 MT, compatible with all Uponor brass manifolds. Set consists of two ball valves. Length: 60 mm.
Item no. MT ["] FT ["] Description unit
1012913 R 1 Rp 3/4 Uponor manifold H ball valve 1MT-3/4FT 1 set
Uponor manifold H capMade of coated brass, with eurocone sealing insert.
Item no. FT ["] Description unit
1014122 G 3/4 Uponor manifold H cap 3/4FT eurocone 10 pcs
EEI-Int-MLC-01.1238
Uponor MLCP plumbing system > Uponor radiator connection accessories
Uponor snap ring
Uponor snap ring whiteMade of polypropylene, white for Uponor MLC pipes. Required distance (pipe middle - middle) between two snap rings, e.g. for supply and return of the heating line approx. 50 mm. Fire classifi cation E acc. to DIN EN 13501-1.
Item no. d [mm] Description unit
1011370 16 Uponor snap ring white 16 50 pcs
1011372 20 Uponor snap ring white 20 50 pcs
Uponor double snap ringMade of polypropylene white, for Uponor MLC pipes 14 - 20 mm, to cover fl oor and/or wall penetration of the radiator connection pipe line. Required inside micrometer (pipe middle - middle) between two Uponor MLC pipes for supply and return fl ow: 50 mm. The cascaded penetrations can be severed easily with a knife according to desired pipe dimension. The snap ring consists of two halves, which are pressed together with two push buttons by hand. Fire classifi cation B2 acc. to DIN EN 13501-1.
Item no. d [mm] Description unit
1011373 14-20 Uponor double snap ring white 14-20 50 pcs
EEI-Int-MLC-01.12 39
Uponor MLCP plumbing system > Uponor pipe fastenings MLC
Uponor pipe fastenings MLC
Uponor pipe clip 16 - 32White, for Uponor MLC pipes 16 - 40 mm for on-wall mounting. Easy opening with srew driver. Connectable up to 25 mm.
Item no. d [mm] Description unit
1013142 16 Uponor pipe clip 16 mm white 100 pcs
1013144 20 Uponor pipe clip 20 mm white 50 pcs
1013145 25 Uponor pipe clip 25 mm white 50 pcs
1013146 32 Uponor pipe clip 32 mm white 50 pcs
Uponor single plugged hookMade of plastic, for fi xing pipes up to a max. outside diameter of 32 mm to the raw concrete ceiling. Colour: blue. Drill hole 8 mm.
Item no. d [mm] l [mm] Description unit
1013137 - 32 60 Uponor single plugged hook 6 cm 50 pcs
1013138 - 32 80 Uponor single plugged hook 8 cm 50 pcs
Uponor twin plugged hookmade of plastic, for fi xing parallel pipes with a max. outside diameter of 32 mm to the raw concrete ceiling. Colour: blue. Drill hole 8 mm.
Item no. d [mm] l [mm] Description unit
1013139 - 32 60 Uponor twin plugged hook 6cm 50 pcs
1013140 - 32 80 Uponor twin plugged hook 8cm 50 pcs
EEI-Int-MLC-01.1240
Uponor MLCP plumbing system > Uponor tools
Uponor cutting tools
Uponor pipe cutter up to 32For Uponor pipes, outside diameter up to 32 mm.
Item no. d [mm] Description unit
1013719 - 32 Uponor pipe cutter up to 32 mm 1 pcs
Uponor pipe cutter up to 20For Uponor pipes, outside diameter up to 20 mm with corrugated pipe cutting device.
Item no. d [mm] Description unit
1006636 - 20 Uponor pipe cutter 14-20 mm 1 pcs
1006637 Uponor spare bladefor pipe cutter 1006636 1 pcs
Uponor pipe cutting tool 25-63For Uponor pipes, outside diameter 25-63 mm.
Item no. d [mm] Description unit
1006634 25-63 Uponor pipe cutting tool 25-63 mm 1 pcs
Uponor pipe cutting tool 50-75For Uponor pipes, outside diameter 50-75 mm.
Item no. d [mm] Description unit
1014171 50-75 Uponor pipe cutting tool 50-75 mm 1 pcs
Uponor toolkit 63-110Consisting of pipe cutting tool with bevelling device for pipes with outer diameter from 63-110 mm. Supplied in a tool case.
Item no. d [mm] Description unit
1014334 63-110 Uponor pipe cutting tool a. deburrer MLC63-110 mm 1 pcs
EEI-Int-MLC-01.12 41
Uponor MLCP plumbing system > Uponor tools
Uponor bevelling tools
Uponor bevelling tool MLC up to 32For bevelling the Uponor MLC pipes. Supplied with manual toggle. Without manual toggle to be used as attachment for self-driving screw with tapping screw thread.
Item no. d [mm] Description unit
1006830 16 Uponor bevelling tool MLC 16 1 pcs
1015743 18 Uponor bevelling tool MLC 18 1 pcs
1015749 20 Uponor bevelling tool MLC 20 1 pcs
1015756 25 Uponor bevelling tool MLC 25 1 pcs
1015762 32 Uponor bevelling tool MLC 32 1 pcs
Uponor bevelling tool MLC 40-75For bevelling the Uponor MLC pipes. Supplied with manual toggle. Without manual toggle to be used as attachment for self-driving screw with tapping screw thread.
Item no. d [mm] Description unit
1006638 40 Uponor bevelling tool MLC 40 1 pcs
1015808 50 Uponor bevelling tool MLC 50 1 pcs
1014339 63 Uponor bevelling tool MLC 63 1 pcs
1014344 75 Uponor bevelling tool MLC 75 1 pcs
Uponor bevelling tool 3-size MLCFor bevelling of Uponor MLC pipes with outer diameters up to 25 mm.
Item no. d [mm] d1 [mm] d2 [mm] Description unit
1015739 16 20 25 Uponor bevelling tool 3-size MLC16/20/25 1 pcs
EEI-Int-MLC-01.1242
Uponor MLCP plumbing system > Uponor tools
Uponor bending tools
Uponor inside bending spring MLCSpecial bending spring for Uponor MLC pipe.
Item no. d [mm] Description unit
1013729 16 Uponor bending spring inside MLC 16 1 pcs
1013732 18 Uponor bending spring inside MLC 18 1 pcs
1013734 20 Uponor bending spring inside MLC 20 1 pcs
1013737 25 Uponor bending spring inside MLC 25 1 pcs
1013739 32 Uponor bending spring inside MLC 32 1 pcs
Uponor outside bending spring MLCSpecial bending spring for Uponor MLC pipe.
Item no. d [mm] Description unit
1006639 14 Uponor bending spring outside MLC 14 1 pcs
1006640 16 Uponor bending spring outside MLC 16 1 pcs
1013790 18 Uponor bending spring outside MLC 18 1 pcs
1013792 20 Uponor bending spring outside MLC 20 1 pcs
1013794 25 Uponor bending spring outside MLC 25 1 pcs
Uponor bending tool MLCFor producing evenly formed bends in Uponor MLC pipes with outer diameters up to 32 mm. Delivered complete in tool case with bending segments.
Item no. d [mm] Description unit
1013773 16-32 Uponor bending tool MLC 16-32 1 pcs
Uponor pressing tools
Uponor manual pressing tool MLCFor pressing of Uponor press fi ttings MLC 14-20 mm in conjunction with exchangeable inserts. Supplied in case without exchangeable inserts.
Item no. d [mm] Description unit
1015764 14-20 Uponor manual press tool MLC 14-20incl. case without pressing inserts 1 pcs
EEI-Int-MLC-01.12 43
Uponor MLCP plumbing system > Uponor tools
Uponor pressing tools
Uponor manual pressing tool inserts MLCFor inserting into the manual pressing tool for pressing the Uponor press fi ttings MLCP 14/16/18/20 mm.
Item no. d [mm] Description unit
1015777 16 Uponor manual press tool insert MLC 16 1 set
1015779 18 Uponor manual press tool insert MLC 18 1 set
1015780 20 Uponor manual press tool insert MLC 20 1 set
Uponor press toolkit battery Mini 32Supplied in plastic case including battery and charger unit and pressing jaws for the dimensions 16/20/25/32. Range of application up to 32 mm. Technical Specifi cations: Weight of the pressing machine, incl. pressing jaw: 2.5 kgMotor voltage: 9.6 V DCCharging voltage: 9.6 VCharge status indicator: optical display of battery Charging time: ca. 40 min.For dimensions: up to 32 mmPressing time: ca. 4 secCapacity: ca. 65 pressings with dimension 20 per fully charged battery.Incl. maintenace control
Item no. d [mm] OV [V] Description unit
1007096 - 32 9.6 Uponor battery pressing tool Mini 32with pressing jaws 16/20/25/32 KSP0 1 pcs
Uponor pressing jaws mini MLC KSP0Uponor pressing jaws MLC mini KSP0 für Uponor press fi ttings up to 32 mm.
Item no. d [mm] Description unit
1007091 16 Uponor pressing jaws MLC Mini 16 KSP0 1 pcs
1007092 18 Uponor pressing jaws MLC Mini 18 KSP0 1 pcs
1007093 20 Uponor pressing jaws MLC Mini 20 KSP0 1 pcs
1007094 25 Uponor pressing jaws MLC Mini 25 KSP0 1 pcs
1007095 32 Uponor pressing jaws MLC Mini 32 KSP0 1 pcs
Uponor press tool electric UP 75Supplied in plastic case for the 230 V mains connection, without pressingjaws. Range of application up to 110 mm.Technical Specifi cations:Weight of the pressing tool: 3.30 kgNominal voltage: 230 V DC / 50 HzNominal capacity: 200 WattFor dimensions: up to 110 mmPress power: ca. 32 kNPress duration: ca. 7 sec.
Item no. d [mm] OV [V] Description unit
1007082 - 110 230 Uponor electric pressing tool UP 75 ELwithout pressing jaws 1 pcs
EEI-Int-MLC-01.1244
Uponor MLCP plumbing system > Uponor tools
Uponor pressing tools
Uponor press tool battery UP 75Supplied in plastic tool case including an accumulator and a charging device, without pressing jaws. Application fi eld for dimensions up to 110 mm. Technical Specifi cations: Weight of the pressing machine: 3.95 kg Motor voltage: 12 V DC Charging voltage: 12 V Charge status indicator: Optical display accumulator Charging time: ca. 1 hr., or 1/4 hr. with fast charger for dimensions: up to 110 mm Press capacity: ca. 32 kN Press duration: ca. 7 sec. Output: ca. 220 pressings with dimension 20 per fully charged battery
Item no. d [mm] OV [V] Description unit
1006827 - 110 12 Uponor battery pressing tool UP 75without pressing jaws 1 pcs
Uponor pressing jaws MLC KSP0Uponor pressing jaws for Uponor MLC press fi ttings up to 32 mm.
Item no. d [mm] Description unit
1007084 16 Uponor pressing jaws MLC 16 KSP0 1 pcs
1007085 18 Uponor pressing jaws MLC 18 KSP0 1 pcs
1007086 20 Uponor pressing jaws MLC 20 KSP0 1 pcs
1007087 25 Uponor pressing jaws MLC 25 KSP0 1 pcs
1007088 32 Uponor pressing jaws MLC 32 KSP0 1 pcs
Uponor pressing jaws MLCUponor pressing jaws MLC for Uponor MLC press fi ttings 40-50 mm.
Item no. d [mm] Description unit
1015768 40 Uponor pressing jaws MLC 40 1 pcs
1015792 50 Uponor pressing jaws MLC 50 1 pcs
Uponor modular pressing unit MLCPressing chain for Uponor MLC press fi ttings 63 - 110 in conjunction with the base unit and the pressing tool UP 75 and UP 75 EL.
Item no. d [mm] Description unit
1046541 63 Uponor pressing chain MLC 63 1 pcs
1046542 75 Uponor pressing chain MLC 75 1 pcs
EEI-Int-MLC-01.12 45
Uponor MLCP plumbing system > Uponor tools
Uponor pressing tools
Uponor modular pressing unit MLCPressing chain for Uponor MLC press fi ttings 63 - 110 in conjunction with the base unit and the pressing tool UP 75 and UP 75 EL.
Item no. d [mm] Description unit
1046543 90 Uponor pressing chain MLC 90 1 pcs
1046544 110 Uponor pressing chain MLC 110 1 pcs
Uponor modular base unit MLCBase unit for the pressing chain to press Uponor MLC press fi ttings 63 - 110 in conjunction with the pressing tool UP 75 and UP 75 EL.
Item no. d [mm] Description unit
1046545 63-110 Uponor base unit 63 -110 1 pcs
Uponor accessories
Uponor pipe straightener MLCFor simple and quick straightening of the Uponor MLC pipes. Adjustable for the Uponor MLC pipes up to 25 mm.The pipe straightener is not compatible with the Uponor uncoiler. Fixing has to be managed on site.
Item no. Description unit
1010512 Uponor pipe straightener MLC 1 pcs
Uponor bending tool for mounting trackFor producing evenly formed, correctly angled bends in the 2 meter long mounting track.
Item no. Description unit
1015424 Uponor bending tool f. 2m mounting track 1 pcs
EEI-Int-MLC-01.1246
Uponor MLCP plumbing system > Uponor tools
Uponor accessories
Uponor pressure test plug MLC up to 40Re-usable plug for pressure test of installations, screwed into bevelled pipe. After completion of the pressure test unscrew the pressure test plug out of the pipe and cut it to the required length (length of plug + 1.5mm).
Item no. d [mm] FT ["] Description unit
1013756 16 1/2 Uponor pressure test plug MLC 16 10 pcs
1013760 20 1/2 Uponor pressure test plug MLC 20 10 pcs
1013762 25 1/2 Uponor pressure test plug MLC 25 10 pcs
1013764 32 1/2 Uponor pressure test plug MLC 32 5 pcs
1013765 40 1/2 Uponor pressure test plug MLC 40 2 pcs
Uponor press stop end MLCMade of tin-plated brass, with fi xed press sleeve, stop ring, pressed identifi cation, colour code and test safety. Press without bevel.
Item no. d [mm] Description unit
1007078 16 Uponor press stop end MLC 16 10 pcs
1007079 20 Uponor press stop end MLC 20 10 pcs
1007080 25 Uponor press stop end MLC 25 10 pcs
1007081 32 Uponor press stop end MLC 32 5 pcs
EEI-Int-MLC-01.12 47
International sales and delivery terms
EEI-Int-MLC-01.1248
Uponor MLCP plumbing system > International sales and delivery terms
1 Interpretation
2 Basis of the sale
3 Orders and specifications
4 Price of Goods
5 Terms of payment
6 Delivery and Performance
International sales and delivery terms
Uponor MLCP plumbing system > International sales and delivery terms
7 Risk and property
8 Liability
9 Insolvency of Buyer
10 Packing
11 General
49EEI-Int-MLC-01.12
Item no. unit Page
1006634 pcs 41
1006636 pcs 41
1006637 pcs 41
1006638 pcs 42
1006639 pcs 43
1006640 pcs 43
1006641 pcs 22
1006827 pcs 45
1006830 pcs 42
1007077 pcs 37
1007078 pcs 47
1007079 pcs 47
1007080 pcs 47
1007081 pcs 47
1007082 pcs 44
1007084 pcs 45
1007085 pcs 45
1007086 pcs 45
1007087 pcs 45
1007088 pcs 45
1007091 pcs 44
1007092 pcs 44
1007093 pcs 44
1007094 pcs 44
1007095 pcs 44
1007096 pcs 44
1010512 pcs 46
1011370 pcs 39
1011372 pcs 39
1011373 pcs 39
1012858 m 8
1012859 m 8
1012860 m 8
1012862 m 8
1012863 m 8
1012864 m 8
1012866 m 8
1012867 m 8
1012869 m
1012872 m 8
1012877 pcs 38
1012878 pcs 38
1012879 pcs 38
1012880 pcs 38
1012881 pcs 38
1012882 pcs 38
1012883 pcs 38
1012884 pcs 38
1012885 pcs 38
1012886 pcs 38
1012887 pcs 38
1012913 set 38
1013134 pcs 37
1013137 pcs 40
1013138 pcs 40
Item no. unit Page
1013139 pcs 40
1013140 pcs 40
1013142 pcs 40
1013144 pcs 40
1013145 pcs 40
1013146 pcs 40
1013372 m 6
1013378 m 6
1013380 m 6
1013383 m 6
1013392 m 6
1013400 m 6
1013432 m 6
1013438 m 6
1013442 m 6
1013444 m 6
1013446 m 6
1013449 m 6
1013451 m 6
1013453 m 6
1013455 m 6
1013457 m 6
1013578 m 7
1013623 m 7
1013624 m 7
1013625 m 7
1013626 m 7
1013627 m 7
1013628 m 7
1013629 m 7
1013630 m 7
1013719 pcs 41
1013729 pcs 43
1013732 pcs 43
1013734 pcs 43
1013737 pcs 43
1013739 pcs 43
1013756 pcs 47
1013760 pcs 47
1013762 pcs 47
1013764 pcs 47
1013765 pcs 47
1013773 pcs 43
1013790 pcs 43
1013792 pcs 43
1013794 pcs 43
1013830 pcs 35
1013832 pcs 21
1013846 pcs 21
1013854 pcs 21
1013894 pcs 22
1013906 pcs 36
1013907 pcs 22
1013914 pcs 22
1013932 pcs 23
Item no. unit Page
1013946 pcs 23
1013970 pcs 36
1013978 pcs 36
1013982 pcs 21
1013989 pcs 21
1013998 pcs 21
1014004 pcs 21
1014011 pcs 21
1014107 pcs 33
1014109 pcs 33
1014111 pcs 33
1014117 pcs 33
1014120 pcs 33
1014121 pcs 33
1014122 pcs 57
1014123 pcs 33
1014137 pcs 33
1014138 pcs 33
1014139 pcs 33
1014143 pcs 22
1014145 pcs 22
1014147 pcs 23
1014171 pcs 41
1014334 pcs 41
1014339 pcs 42
1014344 pcs 42
1014525 pcs 13
1014534 pcs 13
1014536 pcs 13
1014540 pcs 13
1014546 pcs 13
1014549 pcs 13
1014551 pcs 13
1014561 pcs 13
1014564 pcs 13
1014567 pcs 13
1014574 pcs 13
1014577 pcs 13
1014580 pcs 13
1014589 pcs 13
1014592 pcs 13
1014599 pcs 13
1014602 pcs 13
1014610 pcs 13
1014613 pcs 13
1014618 pcs 13
1014621 pcs 13
1014679 pcs 14
1014686 pcs 14
1014692 pcs 15
1014704 pcs 14
1014709 pcs 14
1014713 pcs 14
1014716 pcs 15
1014724 pcs 14
8
50
Uponor MLCP plumbing system > Item search register
Item search register
EEI-Int-MLC-01.12
Item no. unit Page
1014729 pcs 14
1014732 pcs 14
1014736 pcs 15
1014739 pcs 15
1014746 pcs 14
1014751 pcs 14
1014755 pcs 14
1014757 pcs 15
1014761 pcs 15
1014765 pcs 14
1014770 pcs 14
1014774 pcs 15
1014812 pcs 15
1014825 pcs 15
1014918 pcs 17
1014923 pcs 18
1014927 pcs 18
1014931 pcs 19
1014935 pcs 18
1014938 pcs 18
1014941 pcs 18
1014944 pcs 17
1014954 pcs 19
1014957 pcs 18
1014961 pcs 18
1014966 pcs 18
1014968 pcs 18
1014970 pcs 18
1014974 pcs 18
1014976 pcs 17
1014981 pcs 18
1014983 pcs 18
1014987 pcs 19
1014991 pcs 19
1014996 pcs 18
1015000 pcs 18
1015002 pcs 18
1015007 pcs 18
1015011 pcs 18
1015015 pcs 18
1015017 pcs 18
1015021 pcs 18
1015025 pcs 18
1015028 pcs 17
1015033 pcs 18
1015038 pcs 18
1015044 pcs 19
1015048 pcs 19
1015053 pcs 18
1015057 pcs 18
1015060 pcs 18
1015064 pcs 18
1015068 pcs 18
1015073 pcs 17
1015082 pcs 18
Item no. unit Page
1015088 pcs 19
1015091 pcs 19
1015154 pcs 16
1015164 pcs 16
1015172 pcs 16
1015176 pcs 16
1015179 pcs 16
1015185 pcs 16
1015187 pcs 16
1015194 pcs 16
1015199 pcs 16
1015202 pcs 16
1015205 pcs 16
1015215 pcs 16
1015217 pcs 16
1015219 pcs 16
1015270 pcs 20
1015274 pcs 20
1015277 pcs 20
1015280 pcs 20
1015283 pcs 20
1015286 pcs 20
1015295 pcs 20
1015297 pcs 20
1015301 pcs 20
1015345 pcs 29
1015424 pcs 46
1015425 pcs 35
1015455 pcs 29
1015460 pcs 31
1015486 pcs 29
1015512 pcs 29
1015515 pcs 29
1015559 pcs 23
1015572 pcs 31
1015626 pcs 35
1015628 pcs 35
1015631 pcs 35
1015634 pcs 36
1015636 pcs 32
1015643 pcs 35
1015653 pcs 35
1015659 pcs 36
1015661 pcs 36
1015663 pcs 36
1015739 pcs 42
1015743 pcs 42
1015749 pcs 42
1015756 pcs 42
1015762 pcs 42
1015764 pcs 43
1015768 pcs 45
1015777 set 44
1015779 set 44
1015780 set 44
Item no. unit Page
1015792 pcs 45
1015808 pcs 42
1022714 pcs 9
1022715 pcs 9
1022716 pcs 9
1022717 pcs 9
1022718 pcs 10
1022719 pcs 10
1022720 pcs 10
1022721 pcs 10
1022722 pcs 10
1022723 pcs 10
1022724 pcs 10
1022725 pcs 10
1022726 pcs 10
1022727 pcs 10
1022728 pcs 10
1022729 pcs 10
1022730 pcs 10
1022731 pcs 10
1022732 pcs 10
1022733 pcs 10
1022734 pcs 10
1022735 pcs 10
1022736 pcs 11
1022737 pcs 11
1022738 pcs 11
1022739 pcs 11
1022740 pcs 12
1022741 pcs 12
1022742 pcs 12
1022743 pcs 12
1029121 pcs 27
1029122 pcs 27
1029125 pcs 27
1029126 pcs 27
1029127 pcs 27
1029128 pcs 27
1029129 pcs 28
1029130 pcs 28
1029131 pcs 28
1029132 pcs 28
1029133 pcs 28
1029134 pcs 27
1029135 pcs 27
1029136 pcs 27
1029137 pcs 27
1029138 pcs 26
1029139 pcs 26
1029140 pcs 26
1029141 pcs 26
1029142 pcs 26
1029143 pcs 26
1029144 pcs 26
1029145 pcs 26
51
Uponor MLCP plumbing system > Item search register
Item search register
EEI-Int-MLC-01.12
Item no. unit Page
1029146 pcs 27
1029147 pcs 28
1030549 m 6
1030550 m 6
1030551 m 6
1045451 set 34
1046386 pcs 9
1046387 pcs 9
1046388 pcs 9
1046389 pcs 9
1046390 pcs 10
1046391 pcs 10
1046392 pcs 11
1046393 pcs 11
1046394 pcs 11
1046395 pcs 11
1046396 pcs 11
1046397 pcs 11
1046398 pcs 11
1046399 pcs 11
1046400 pcs 11
1046401 pcs 11
1046402 pcs 11
1046403 pcs 12
1046404 pcs 12
1046405 pcs 12
1046406 pcs 12
1046477 pcs 28
1046478 pcs 28
1046541 pcs 45
1046542 pcs 45
1046543 pcs 46
1046544 pcs 46
1046545 pcs 46
1046750 pcs 28
1046751 pcs 28
1046901 pcs 13
1046902 pcs 13
1046903 pcs 14
1046904 pcs 14
1046905 pcs 13
1046906 pcs 13
1046907 pcs 14
1046908 pcs 15
1046909 pcs 15
1046910 pcs 16
1046911 pcs 15
1046912 pcs 16
1046913 pcs 16
1046914 pcs 16
1046915 pcs 19
1046916 pcs 19
1046917 pcs 19
1046918 pcs 19
1046919 pcs 19
Item no. unit Page
1046920 pcs 19
1046921 pcs 19
1046922 pcs 20
1046923 pcs 20
1046924 pcs 19
1046925 pcs 19
1046926 pcs 19
1046927 pcs 19
1046928 pcs 19
1046929 pcs 20
1046930 pcs 17
1046931 pcs 17
1046932 pcs 17
1046933 pcs 17
1046934 pcs 17
1046935 pcs 17
1046937 pcs 20
1046938 pcs 20
1046939 pcs 20
1046940 pcs 27
1046941 pcs 27
1048471 pcs 29
1057835 pcs 29
1057836 pcs 29
1057837 pcs 29
1057838 pcs 29
1057839 pcs 30
1057840 pcs 29
1057841 pcs 30
1057842 pcs 30
1057843 pcs 30
1057844 pcs 30
1057845 pcs 30
1057846 set 31
1057847 pcs 31
1058086 pcs 21
1058087 pcs 21
1058088 pcs 21
1058090 pcs 21
1058091 pcs 21
1058092 pcs 21
1058093 pcs 21
1058094 pcs 21
1058095 pcs 21
1058097 pcs 22
50
Uponor MLCP plumbing system > Item search register
Item search register
EEI-Int-MLC-01.12
How to contact us
Customer Service Center T + 49 (0)9521-690-370 F + 49 (0)9521-690-750 E [email protected]
Technical assistance T +49 (0)9521-690-739 or 834 F +49 (0)9521-690-750 E [email protected]
Export Department T +49 (0)9521-690-370 F +49 (0)9521-690-750 E [email protected]
We reserve the right to make technical amendments and carry out updates.
55EEI-Int-MLC-01.12
12/2
011
– Su
bjec
t to
mod
ifi ca
tions
Uponor – partnering with professionals
Uponor is a leading supplier of plumbing and heating systems for the residential and commercial building markets across Europe and North America, and a market leader in municipal infrastructure pipe systems in the Nordic countries. Uponor's key applications include indoor climate and plumbing systems.
Uponor International Sales takes care of all business activities in the Balkans, Western, Central and East Asia, Africa and Latin America.
Uponor. Simply more.
Uponor GmbHP.O. Box 164197433 HassfurtGermanyT +49-(0)9521 690 0F +49-(0)9521 690 750E [email protected] www.uponor.com/international