Phone: 877.228.9246 • Fax: 877.232.9246 • www.cimberiovalve.com

1220NLC Full Port Ball Valve

1220NLC

Applications:The Cimberio 1220NLC Full Port Ball Valve is designed for direct connection to hard drawn copper or stainless steel tube using standard press tools with XL-C jaws and rings. CimPRESS valves were developed to eliminate the need to assemble seperate components in the field on non-aggressive fluid applications including: residential, industrial, and agricultural systems. 1220NLC valves are manufactured from DZR "CR" corrosion-resistant brass with EPMD-ASTM D 2000 M2 O-Rings to ensure a leak-proof, cold-crimped seal with added protection against corrosion. CimPRESS is NOT intented for use with soft or rolled copper tubing.

Connection:Standard press connection for copper and stainless steel tube plumbing systems. For use with XL-C press jaws and rings only.

Features:Installs quickly and easily•

Manufactured from DZR "CR" brass•

EPMD-ASTM D 2000 M2 O-Rings•

CimPRESS x CimPRESS • XL-C Jaws and Rings

SellSheet-1220NLC.V001

NO-LEAD

Based on NSF/ANSI 61-2008 Annex G in compliance with Section 116875 of the California Health & Safety Code.

All Cimberio valves qualify for the American Recovery and Reinvestment Act and the Buy American Act.

Flow and Pressure droP Pressure/TeMPeraTure raTInGs

Size Cim No.

2-1/2" 1220nlC-11

3" 1220nlC-12

4" 1220nlC-14

CimPRESS is a registered trademarks of Cimberio Valve, Inc.

[psi]

Q [U.S. gal/min.]

1

3 10 100

PORT mm

0,1

10

1000

60 72

94

1/2

”

3”2”

4

Phone: 877.228.9246 • Fax: 877.232.9246 • www.cimberiovalve.com

Job Name:_______________________________________

Job #: ___________________________________________

Contractor: ______________________________________

Engineer: ________________________________________

Tag: _____________________________________________

Date: ____________________________________________

Contractor #: ____________________________________

Specification #: __________________________________

CV CM Cs MT

CV: Capacity in "U.S. gal/min" at pressure drop of "1 PSI"

CM: Working Torque in "lb x in"

CS: Starting Torque in "lb x in"

MT: Torque Breaking Point on the Sten in "lb x in"

Element: Water – Temperature: 59.9° F

Working Pressure: 250 PSI

Max. Operating Temp: Working Limit for Fluids: -4° F – 248° F

Test Pressures: According to ISO 5208

NLC Full Port Ball Valve 1220NLCCimPRESS x CimPRESS • XL-C Jaws and Rings

SIZE 2-1/2" 3" 4"

Ø mmØ inch

642.52

762.99

1003.94

CVgal/min

532.4 865.4 1417.1

CMN x mlb x in

15133

19168

29257

CSN x mlb x in

30266

38337

58514

MTN x mlb x in

2802480

2802480

5504872

Materials: n Body: Hot Forged Brass ASTM C37700n Ball: Brass, Machined to a Micro-Smooth Finish,

Hard Chromium Platedn Ball seats: Conical Rings in P.T.F.E. n stem seal: Rings in P.T.F.E. n o-ring: EPDM - ASTM D 2000 M2n Handle: Aluminumn nut: Self-Locking Type, Steel ANSI C.1008.

Size 2-1/2" 3" 4"

Port inchPort mm

2.52"64mm

2.99"76mm

3.94"100mm

a9-7/16"240mm

9-7/16"240mm

9-7/16"240mm

B4-9/16"

115.5mm4-7/8"

124.5mm5-1/2"

139.5mm

C5-7/16"

137.5mm5-3/4"

146.5mm6-3/8"

161.5mm

d10-3/16"259mm

10-7/8"276mm

12-3/16"309mm

e14-9/16"369.5mm

14-7/8"378mm

15-1/2"394.5mm

CH14-1/16"103mm

4-3/4"121mm

6"152mm

CH23-3/16"80.5mm

3-11/16"93.5mm

4-11/16"119mm

PoundsGrams

10.124590

13.366058

16.8127642

required Pipe Insertion depth

2.1685"55.08mm

2.1525"54.67mm

2.3565"59.85mm