We are proud to represent the premier Machine Tools and Measuring Instruments manufactured today. Offerings include: • Equipment Sales – CNC machines, Manual Machines, Coordinate and Video Measurement Systems. • Reliable Service – Maintenance, Repair, Calibration, Certification and Installation. • Technical Expertise – Applications Support, Training, Turn Key Services, Expert Advice and Consulting. Rosco’s showroom is located in Auburn, Washington and is fully equipped for demonstration and support. Our experienced staff can bring portable demonstration units to your facility. (253) 333-2439 | www.roscoprecisionmachinery.com 4710 - B Street NW - Unit 104, Auburn, Washington 98001 HURCO 3-Axis Machining Centers ............................................3 HURCO 5-Axis Machining Centers & Solutions ..........................4 HURCO 5-Axis Machining Features ...........................................5 HURCO 2-Axis Turning Centers .................................................6 Takumi Highlights & H-Series Machining Centers.......................7 Takumi 3-Axis, 5-Axis, 2-Axis Machining Centers.......................8 Axile 5-Axis & Machining Tools............................................ 9-10 TRAK ProtoTRAK............................................................... 11-13 TRAK Tool Room Milling & Turning Tools ........................... 14-15 OGP & QVI Metrology Equipment ..................................... 16-17 LITZ Multi-Axis Turning............................................................18 Manual Equipment – Acer, Sharp ............................................19 Automation & 3D Printing.......................................................19 About Us ................................................................................20 TABLE OF CONTENTS: Call us to set up a demonstration! 2021 SERVING WA, OR, ID, MT
Transcript
We are proud to represent the premier Machine Tools and Measuring Instruments manufactured today.
Offerings include:
• Equipment Sales – CNC machines, Manual Machines, Coordinate and Video Measurement Systems.
• Reliable Service – Maintenance, Repair, Calibration, Certification and Installation.
Rosco’s showroom is located in Auburn, Washington and is fully equipped for demonstration and support. Our experienced staff can bring portable demonstration units to your facility.
(253) 333-2439 | www.roscoprecisionmachinery.com4710 - B Street NW - Unit 104, Auburn, Washington 98001
Nobody gets you from print to part faster than HURCO.
The integrated Hurco CNC control and conversational programming powered by WinMax® is the most versatile and intuitive out of any of the CNC controls
in the industry. More importantly, each feature has benefits that you can measure in terms of increased productivity, which leads to increased profitability.
HURCO makes it easy. • True Interrupt Cycle – When you press the
Interrupt button, the spindle stops cutting, the coolant shuts off, and the tool automatically retracts to Z home. You can jog the machine in any direction to check the part or change tool inserts. Then, simply press two buttons and the cycle automatically resumes.
• Conversational Part Probing – Setup is a snap because the probe finds the part and determines its position on the table, including the skew angle there is no need to align the part to the machine using edge finders.
• Mid-Program Restart – After stopping a cycle, Mid-Program Restart makes it easy to restart at the point in the program where you left off. You can change a broken tool without all the frustration because you can get right back to the correct point in the program without the need to write additional code or cut air.
NEW FEATURE: 3D Import with 3D DXF TechnologyHurco’s 3D Import feature includes 3D DXF technology that now displays all CAD geometry, including splines and Z-depths.
To learn more scan the QR code
or visit HURCO.com/3DImport
HURCO 3-Axis Machining Centers
HURCO – VM & VMX SERiES
Model Travels Table Power sPeed PGMFeed /XY raPidVM ONE 26/16/14 30 x 16 10hp 8,000 rpm 1,100/1,100 ipmVM5i 18/14/14 18 x 14 10hp 8,000 rpm 748/748 ipmVM10i 26/16/20 30 x 16 15hp 10,000 rpm 1,100/1,100 ipmVM20i 40/20/20 46 x 20 20hp 10,000 rpm 1,100/1,100 ipmVM30i 50/20/20 52 x 20 20hp 10,000 rpm 1,100/1,100 ipm
VMX24i 24/20/24 30 x20 12hp 12,000 rpm 1,260/1,496 ipmVMX24Di 24/20/24 30 x 20 12hp 12,000 rpm 1,260/1,496 ipmVMX30i 30/20/24 40 x 20 18hp 12,000 rpm 1,260/1,496 ipmVMX30Di 30/20/24 40 x 20 20hp 15,000 rpm 1,260/1,496 ipmVMX42i 42/24/24 50 x 24 24hp 12,000 rpm 1,260/1,496 ipmVMX42Di 42/24/24 50 x 24 20hp 15,000 rpm 1,260/1,496 ipmVMX50i 50/26/24 59 x 26 24hp 12,000 rpm 944/1,260 ipmVMX50i-50T 50/26/24 59 x 26 30hp 8,000 rpm 944/1,260 ipmVMX6030i 60/30/24 66 x 30 24hp 12,000 rpm 787/1,260 ipmVMX6030i-50T 60/30/24 66 x 30 30hp 8,000 rpm 944/1,260 ipmVMX64i 64/34/30 66 x 35 24hp 12,000 rpm 530/709 ipmVMX64i-50T 64/34/30 66 x 35 30hp 8,000 rpm 530/709 ipmVMX84i 84/34/30 86 x 34 24hp 12,000 rpm 530/709 ipmVMX84i-50T 84/34/30 86 x 34 30hp 8,000 rpm 530/709 ipm
Accurate & Rigid VMC’s deliver performance cutting & smooth surface finish and the most powerful control available. Fastest processing available for G code programs
w/4000 Blk/sec and 10,000 Blk lookahead. Superior Components and spindles; Yaskawa sigma V Digital controls and Drives.
HURCO – BX SERiES
Model Travels Table Power sPeed PGMFeed /XY raPidBX40i 40.2/27.6/19.7 41.3 x 27.6 47hp 18,000 rpm 1,417/1,417 ipmBX50i 53.2/37.4/23.6 59.1 x 37.8 47hp 18,000 rpm 1,417/1,417 ipmBX60i 63/51.2/27.6 74.8 x 51.2 47hp 18,000 rpm 1,417/1,417 ipm
HURCO BX Dual Column Bridge Design superior rigidity! Long Y Axis Travel & HSK63A Spindles
Hurco is Engineered in Indianapolis USA for more than 50 years.
Model Travels Table aXis roTaTion rPM sPeed /PowerVM10Ui 21x16x19 9” dia +30 / -110 A 25 rpm 12K/15 hp +/- 360 C 25 rpm VMX30Ui 30x20x21 12.5” dia +30 / -110 A 25 rpm 12 & 15K/18hp +/- 360 C 25 rpmVMX40Ui 42x24x21 15.7” dia +30 / -110 A 25 rpm 12 & 15K/24hp +/- 360 C 25 rpmBX40Ui 37x22x20 13.7” dia -30 /+110 B 25 rpm 18K/47hp +/- 360C 25 rpmVC500i 21x18x16 19.7” dia +/-110 B 50 rpm 12K/17hp +/- 360 C 25 rpmVC600i 25x21x18 23.6” dia +/-110 B 25 rpm 12K/22hp +/- 360 C 25 rpmVMX42SRTi 42x24x24 23.6” dia +/- 90 B 50 rpm 12K/48hp 50” x 24” +/- 360 C 100 rpmVMX60SRTi 60x26x24 23.6” dia +/- 90 B 50 rpm 12K/48hp 66” x 26” +/- 360 C 100 rpm VMX84SWi 84x34x39 86”x 34” +/- 90 B 33 rpm 12K/48hp +/- 360 C DCX32-5Si 126x79x35 A/B Axis +/- 105 B 7.5 rpm 18K/72hp Swivel +/- 185 C 11 rpm
HURCO 5-Axis Machining Features
Tool Path LinearizationEliminates gouging of the workpiece and removes the looped line segments on the part that are formed from the XYZBC or AC moves that a CAM system commands. The tool tip will travel in a controlled linear move between points, and not simply a blind rotation. Benefits: Improved surface finish quality and smaller NC programs.
Transform Plane Simplifies programming for 5-sided machining on a 5-axis machine by automatically tracking the desired origin points for each side of the part. You only need to define part zero one time, and Transform Plane manages all the other locations. It basically changes programming on a 5-axis mill back to 2.5D programming - it’s like 3-axis programming on an angle.
True Interrupt CycleNo need to teach the control the path the tool takes when retracting and returning to the part – the Hurco control does it for you. When you press the Interrupt button, the spindle stops cutting, the coolant shuts off, and the tool automatically retracts to Z home. You can jog the machine in any direction to check the part or change tool inserts. Then, simply press two buttons and the cycle automatically resumes right where it left off–at the speed you choose.
Tool Center Point Management eliminates the need to account for the machining center’s centerlines of rotation. Instead, you simply program from part zero. Tool Center Point Management allows you to position the part anywhere on the table.
Benefits• Faster setup• Less complex post processor (NC)• Save time reposting the program (NC)
Model ChuCk bar dia. Turn dia./lenGTh Power TMX8i 8 2.6 14/21.1 37.3hp TMX10i 10 3.07 16.3/25 37.3hp
HURCO – LiVE TOOL – MiLLiNG & TURNiNG
Model ChuCk bar dia. Turn dia./lenGTh Power TMM8i 8 2.04 11.8/17.9 18hp TMM10i 10 3.07 11.6/27.6 24hp TMM12i 12 4.08 24/40 24 hp
HURCO – TMXMY SERiES – Y AXiS MiLLiNG
Model ChuCk bar dia. Turn dia./lenGTh Power TMX8MYi 8 2.6 11/21 33hp TMX10MYi 10 3.07 12/24 30hp
HURCO – TMXMYS SERiES – Y AXiS MiLLiNG & SUB-SPiNDLE
Model ChuCk bar dia. Turn dia./lenGTh Power TMX8MYS 8 2.6 12/24 33hp TMX10MYS 10 3.07 12/24 38hp
Takumi Machining Centers
Hurco Lathes are engineered with true slant-beds and rigid one-piece machine base castings designed to yield excellent static and dynamic performance in addition to outstanding dampening properties that inhibit thermal deformation and
twisting for rigidity in hard cuts. Large, high torque spindles, wide distance between guideways, oversize ball screws and the most powerful control in the industry make HURCO the productive choice in turning.
Founded in 1988, Takumi has been exceeding customers’ expectations world wide for 30 years. When Takumi was acquired by Hurco Companies in 2015, a new Takumi Technology Center and Showroom was built in Indianapolis to serve the U.S. market and a comprehensive
service and support network is established Nationwide. www.takumiusa.com.
Takumi Standard Features Include Fanuc Controls with ACII Contour Control, 600 Block look ahead, Manual Set-up Guidance.
Takumi H-Series Highlights
• Ladder design provides a rigid support for the saddle and head and prevents deformation in the vertical axis, allowing faster speeds and highly accurate 3D surfacing operation plus allows close proximity of spindle to bridge casting reduces overhang
• Double column design, featuring a robust, one piece construction
• Spindle motor is thermally isolated from the casting, eliminating the main source of heat in the system from transferring vibration and thermal distortion
• Single piece base design absorbs the thrust force of the table preventing the column distortion found on typical “C” frame machines
• Linear scales ensure repeatability and accuracy
• Direct coupled motors and double anchored ball screws eliminate lost motion, as well as the heat build- up found in belt driven machines
• Absolute encoders ensure worry free operation and unrivaled accuracy control at high feed rates
Takumi USA Partners with Renishaw to integrate Set & Inspect to the Fanuc ControlProbing Simplicity! Easily program setup probing routines and/or inspection routines and send them to the control’s memory with a single button press.
TAkUMi – H SERiES DOUBLE COLUMN VERTiCAL MACHiNiNG CENTERS
Model Travels Table Power sPeed H10 40.2/27.5/19.7 41.3 x 27.6 25hp 15,000 rpm H12 53.2/37.4/23.6 59.1 x 37.8 25hp 15,000 rpm H16 62.9/51.1/27.5 74.8 x 51.2 25hp 15,000 rpm
AXILE builds the highest performance state of the art machine tools designed to beat the competition at an affordable price. Starting in 2015, Axile sold more than 500 machines into the European Market. Rigid bridge designs, dual motors and ball screws, dual torque motor trunnions. Compact, rear loading pallet or robot automation makes AXILE the most competitive
production 5 axis milling solution. The patented industry 4.0 Art System includes 27 sensors and machine performance monitoring that can be viewed through the cloud or smart device with your choice of Heidenhain, Siemens or Fanuc Controls.
AXiLE – VC SERiES PERFORMANCE VERTiCAL MACHiNiNG CENTERS
Model Travels Table Power sTd. sPeed (oPT.) V4 23.6/15.75/17.7 30.3 x 16.1 20Hhp 12K rpm (15K/24K) V5 31.5/19.7/19.7 35.4 x 20.5 20hp 12K rpm (15K/24K) V6 41.3/23.6/23.6 47.2 x 23.6 25hp 12K rpm (15K/20K) V7 47.2/28.7/25.6 55.1 x 28 25hp 12K rpm (15K/20K)
AXiLE – MC SERiES VERTiCAL MACHiNiNG CENTERS
Model Travels Table Power sTd. sPeed (oPT.) MC1 30/20/20 35.4 x 20.5 26Hhp 10K rpm (12K/15K) MC2 42/24/24 47.2 x 23.6 26Hhp 10K rpm (12K/15K) MC3 63/28.7/27.5 66.9 x 27.5 33.5hp 10K rpm (12K/15K)
VC Standard Features• Fanuc, Heidenhain, or Siemens
Control available, your choice• 32 tools Magazine (40 opt)
Model ChuCk bar dia. Turn dia./lenGTh Power SL200 8 2.55 12.6/25.6 25hp SL250 10 3.07 17.7/25.6 27hp SL300 12 3.58 17.7/25.6 27hp
Axile G series features rigid gantry structure design, top quality spindles, swiveling-rotary tables with dual torque-motors and linear and rotary feedback scales to guarantee agile and accurate performance. Choose from Compact, Automation or Mill-Turn Models.
The gantry design allows rear loading automation with robot or pallet pool engineered solutions for high volume production machining.
Couple that with the ART system and you are ahead of the of the competition with Industry 4.0 and controlled processes.
AXiLE – 5-AXiS U & G SERiES
Model Travels Table aXis roTaTion rPM sPeed/TaPerU6 23.6x23.6x23.6 23.6 dia +/- 120 A 16 rpm 15 & 24K/ +/- 360 C 90 rpm Cat or HSK-A63G6 25.6x33.5x19.7 23.6 dia +/- 120 A 100 rpm 15 & 20K/Cat or +/- 360 C 200 rpm HSK-A63G6 Mill TURN 25.6x33.5x19.7 19.7 dia + /-120 A 1500 rpm Hydraulic Clamp +/- 360 C G8 26.4x32.3x23.6 31.5 dia + /-120 A 80 rpm 15K & 20K +/- 360 C 100 rpm HSK-A63G8 Mill TURN 26.4x32.3x23.6 31.5 dia + /-120 A 1000 rpm Hydraulic Clamp +/- 360 C
Takumi delivers superior performance for die, mold and aerospace machining. Box Way Construction Plus standard features like AICC 2 Contour Control, 400 Block Lookahead,
Set-up guidance, 400 Tool Offsets, & 56 work offsets. Takumi is made and supported through Hurco Factories and contains the leading controls by Fanuc Oi and 32i.
TAkUMi – VC SERiES PERFORMANCE VERTiCAL MACHiNiNG CENTERS
Model Travels Table Power sPeed VC1052 41.7/20.5/24 45.7 x 20.5 15hp 12,000 rpm VC0852 33.9/20.5/24 39.4 x 20.5 15hp 12,000 rpm
TAkUMi – HEAVY DUTY BOXWAY GEARED HEAD
Model Travels Table Power sPeed V10 39.5/26/24 41.7 x 25.6 15hp 12,000 rpm V11 43.3/26/24 45.2 x 25.6 20hp 6,000rpm Geared V15 60/30/28.3 63 x 30 25hp 6,000rpm Geared V22 86.6/42/29.5 86.6 x 40.3 35hp 6,000rpm Geared
Takumi 3-Axis Machining Centers
TAkUMi – 5-AXiS
Model u600 u800Travels 26/40/20 32/45/30Table 600mm 800mmSpeed 15,000 20,000Rapid 36m/min 48m/minTaper CAT40 Big Plus HSK63A
Takumi 5-Axis Machining Centers
• Hand scraped to fit• 40 Tool ATC• 21 gig SSDR program
Axial Accuracy Control (AAC)A machine thermo monitoring and compensation technology
Axial thermal monitoring & positioning error compensation. On a high-speed machine, heat will be generated on the machine body from long hours of operation. The thermal induced error on the machine will then cause poor machining accuracy. The intelligent function of AAC is a highly cost-effective solution while improving accuracy with monitoring and compensating for machine thermal error. Thermal sensors are mounted on the machine to monitor the machine temperature. A thermal error estimation model is applied to calculate the corresponding compensation command and thus correcting the tool path. The AAC is activated once temperature runs too high, whereby the machine will then automatically reduce the spindle speed and axial feed rate to compensate for the thermal displacement.
AXILE Machine Tools
Tool-tip Positioning Control (TPC)Direct displacement measure and real-time monitoring and compensation technology
HIGH ACCURACY - Directly measuring expansion
REAL TIME COMPENSATION - Electrical type sensor
BETTER SURFACE FINISH - 5~6 times accuracy improved
In high speed machining applications, the spindle heat generated from the spindle bearings and the motor windings greatly increase the temperature. The spindle will expand, causing a thermal-related inaccuracy. To overcome the spindle thermal growth problem, an effective compensation function was developed — a direct displacement measuring system is integrated into the built-in spindle to measure and compensate the thermal expansion of the spindle. A displacement measurement meter is provided which records the deviation of the high-speed spindle and feeds these values back to the CNC. After precise calculation, the CNC assigns command to the machine and corrects axial positioning.
The Perfect Blend of Machine, CNC and You The ProtoTRAK RMX keeps you in control every step of the way
Machinists love to use ProtoTRAKs and it is no wonder. You get the automation you need to be efficient in an elegant interface that is easy to learn
and use. At the same time it provides you with the manual capability that you need for so many things you do in a day.
Choose the level of automationWork manually. Use a 2-axis CNC with manual Z. Set up and run 3-axis CNC. Program it yourself or import a G-code, CAM, CAD or Solid file. It’s all there, waiting for you to make the choices that are est for your work.
Manual QuillNothing replaces the feel of a manual quill for fine work. The Quill Scale and Ram Position Encoder are coordinated so that you get a single Z Dimension Readout that integrates both.
Real handwheels for the table and saddleWhether they are mechanical or Electronic* you can use the handwheels for manual positioning as well as machining. The DRO Mode of the ProtoTRAK RMX CNC makes manual machining more productive with features such as Teach, Power Feed and Center Calculation.
OverridesYou program spindle speeds and feedrates, but don’t sweat getting them perfect. When you run you have really cool graphical overrides to make adjustments.
See our video at www.trakmt.com/RMX
Editing on the Fly Getting into your program to make changes is quick and easy. From any screen, tap PROG. With a few swipes you’re at the event you want to change. Tap the data you want to change and put in the new data. Done. Start machining again.
Model Travel Table Power RX2 30.5/16/25.5 49 x 9 3 hp RX3 31.5/17/25.8 50 x 10 5 hp RX5 40/20/25.8 50 x 12 5 hp RX7 60/23/24.25 76 x 14 7.5 hp
• Manual with DRO, 2 or 3 axis CNC• High and Low Gear• Programable Spindle Speeds • Handwheels you can work manually
• Solid Ram moves on column for rigidity during heavy cuts
• Manual quill with scale allows control to read true Z axis position
• Hardened and ground way surfaces
The Best Machines Available for Toolroom and Short Run Milling.
A Strong, Precise, Compact, Versatile Production Machine
• Compact 52” x 30.5” Footprint – Fits Anywhere You Need
• Conversational Programming – Easy Setup of Simple Jobs
• G-Code Compatible – for Complex 3D Programs
• DXF/Solid Model Import; HSM/Adapti-Path software Included
• 4th Axis Rotary Available
• Bridge Construction for Rigidity and Precision
• Generous XYZ Travels – 14” x 12” x 17”
• 8 Position Tool Changer
• 10,000 RPM; 3 HP; 30 Taper
TRAK VMC2 Vertical Machining Centerfeaturing the ProtoTRAK RMX CNC
• ProtoTRAK RMX control • Real Handwheels• Traking keeps you inconto at all times • 15 HP Spindle Motor • 16 Tool ATC
• 40 Taper Spindle• 8,000 or 12,000 RPM• Wash down coolant/CTS optional• Cut first part via conversational then
run production fully CNC
TMC that Works for Both Toolroom and Production Applications.
TRAk – TMC SERiES TOOLROOM MACHiNiNG CENTERS
Model Travel Table FooTPrinT TMC5 20/16/20 27.56 x 15.75 85 x 130 TMC7 30/20/20 35.43 x 19.69 97 x 135 TMC10 40.75/20/20 44.09 x 19.69 111 x 135 TMC12 50/27/25 51 x 24 133 x 144 TMC14 60/27/25 63 x 24 157 x 144
SmartScope® Quest SystemsSmartScope® Quest systems are high-accuracy metrology systems designed to use a variety of sensors for full three-dimensional measurement.
Accurate video measurements require accurate images, and Quest offers the best optical performance available. Our patented TeleStar® 10:1 zoom lens is completely telecentric and automatically calibrated throughout its range for distortion free, high-fidelity images – perfect for high-accuracy metrological applications.
OGP & QVI Multisensor Metrology Systems
SmartScope® Flash SystemsSmartScope® Flash™, Flash CNC, and CNC systems are the best choice in automatic general purpose dimensional measurement. A high quality, 12:1 zoom lens calibrates itself at every magnification change for consistent measurement accuracy.
Innovative solid state illumination sources, color camera, and ZONE3® 3D CAD based metrology software make every Flash model a powerful video measuring system.
Every Flash model is multisensor capable, supporting touch probe, laser scanner, and micro-probes.
ogp
SmartScope® SP SystemsSmartScope® SP systems are designed for optimum scanning probe performance. Starting with a rigid base structure, the system mechanics are designed to optimize dynamic data acquisition critical to scanning probe performance. SmartScope SP systems feature ultra-stiff Z-axis motion, and one independent motion axis that carries the part. These characteristics eliminate common mechanical errors that degrade scanning probe performance.
QVI FusionQVI Fusion is an innovative multi-sensor measurement system that combines a unique large field-of-view (LFOV) optical system with available touch probe, laser and micro sensors to form a uniquely productive metrology system.
Fusion 350 The heart of Fusion’s capability lies in its LFOV optical system. Large field optics allow a wide area to be imaged with high accuracy, while QVI’s exclusive feature extraction can instantly process and identify all features and dimensions within the scene with no need for a pre-programmed measurement routine.
OGP (Optical Gaging Products) is a division of Quality Vision International Inc (QVI®), a world leading manufacturer of precision multisensor metrology systems for industrial Quality Control. Our metrology systems focus on measurement technologies that help manufacturers monitor dimensional compliance to design specifications.
Metrology Equipment
OGP & QVI Multisensor Metrology Systems
ogp
QVI Flexpoint CMMQVI Flexpoint is the new generation of large format, multi-sensor coordinate measuring systems. FlexPoint offers a unique blend of precision, flexibility and speed to solve a wide variety of dimensional measurement problems for large format parts.
FlexPoint systems are true multi-sensor systems, supporting a range of tactile and non-contact sensors. These include TP20/TP200, SP25, point and line scan lasers, white light sensors, and a unique QVI video sensor, all powered by QVI ZONE3® 3D CAD based metrology software. The VersaFlex™ multi-sensor head offers up to three simultaneously available sensors on an articulating probe head. With several sensors available, there is no down time while individual sensors are exchanged from a change rack, and no need to re-calibrate each time a sensor is used.
VersaFlexThe VersaFlex multi-sensor head offers up to three simultaneously available sensors on an articulating probe head on FlexPoint™ systems. With several sensors simultaneously available, there is no down time while individual sensors are exchanged from a change rack, and no need to recalibrate each time a sensor is used.
ZONE3 Metrology Software represents a totally new way of working with multisensor measurement systems by displaying relationships between parts, sensors, datum alignments, and machine tooling. ZONE3 uses CAD models and other innovative features to automatically and effortlessly generate measurement routines.
Certified Comparator Products by QVIManual, Semi-Auto, Fully Automated CNC, Conventional & Video Models.
Certified Comparator Products offers optical comparators with the world’s most advanced measurement technologies. Reliable desktop manual profile projectors, floor-standing & fully automatic CNC controlled vision comparators. CCP has the a measurement solution to support your Quality Inspection needs.
Arms• Easy integration and portability • Maximize Machine Utilization
with Excellent Return on Investment
3D Printing & Additive Manufacturing
Commercial 3D PrintersMutli-polymer Printer – Carefully selected materials and optimized materials as well as Open Source capability allows hundreds of materials available for use. 3ntr is the only company on the market that allows you to print multiple polymers simultaneously and without compromise utilizing 3 Independently Heated Nozzle Printing.
Multi-Axis Turning
LITZ TM SeriesLitz TM Series offers B Axis Milling with Tailstock and Counter Spindle or Turret.
2 Spindles – 2 TurretsThe LT2 features a built in main spindle working with the 16 position upper servo turret and another built in sub spindle working with a lower 16 position servo turret. You can complete all of your complex components cutting in a single operation.
Distance Between Spindle End Faces
(TM-2500 = 1110 mm) (TM-2500S = 1400 mm)
LITZ Multi-Axis Mill Turn Technology Models LT1, LT2, LT3 with Y Axis and Live Tools with Multi-Turret and Counter Spindles
Rosco Service, Support and Warranty
Our goal is to be your partner and maintain your equipment to factory specification, resolve warranty issues and assist during break downs and repairs. We provide Factory Certified Field Service Technicians, Factory Parts, and Applications Engineering Support. We also offer maintenance and calibration services for long term reliability of your machinery. We understand that performance and quality is vital to the success of your business and ours.
• Factory Trained Service Technicians in Machine Tools and Measuring Instruments
• Warranty Service and Preventative Maintenance
• Factory Parts
• Telephone Support
• Applications Support and Training
About Us
Rosco Precision Machinery is a machine tool and metrology sales and service organization dedicated to customer applications and problem solving. Since 2003 we have provided machine tool and metrology equipment solutions to more than 750 companies in the Northwest.
We maintain Sales & Service Staff in Washington, Oregon, Idaho and Montana. Our customers are building a broad range of component parts, equipment and products for Aerospace, Military, Medical, Scientific, Transportation, Agricultural and Commercial industries. We are proud to represent the premier Machine Tools and Measuring Instruments manufactured today.
(253) 333-2439 | www.roscoprecisionmachinery.com4710 - B Street NW - Unit 104, Auburn, Washington 98001
