336100528E01 SPARE PARTS LIST - arwell.fi MK II... · MANUAL in regard to procedure and handling of...

SPARE PARTS LISTDIVATOR MK II

336100528E01

© 2008 Interspiro AB, Sweden. This publication contains or refers to proprietary information which is protected by copyright. All rights are reserved. Interspiro®, Divator Lite® and Spiromatic® are registered trademarks belonging to Interspiro.

This publication may not be copied, photocopied, reproduced, translated, or converted to any electronic or machine-readable form in whole or in part without prior written approval from Interspiro.

REAd bEfoRE uSE1. Only holders of a valid INTERSPIRO SERvIcE cERTIfIcATE may carry out service and repairs on INTERSPIRO breathing equipment. Unauthorized service may result in malfunction and users relying thereon could sustain severe respiratory injury or death.

2. When using the spare part list always refer to the equipments SERvIcE

MANUAL in regard to procedure and handling of the spare parts assembly and function.

3. Changes to this document – necessitated by typographical errors, inaccuracies of current information or improvements and changes of equipment – may be done at any time and without prior notice.

4. Some items include a character for identification purposes, ex. 4a and 4b. For some of these items a part number is not available. The identification character used for these items is intended to serve as a reference when following instructions in a service manual. They cannot be ordered as separate items.

5. The service kits contain replacement items used for preventive maintenance. The service kit description “1x set of items in #6” means that one single item from part number 6 is included – even if part number 6 is a 10 pack. The service kit is thus intended for service of a single unit. If the note says “10 pack”, the service kit is intended for servicing 10 units.

6. Always refer to www.INTERSPIRO.cOM for product or document updates and for service bulletines.

ConTEnTS

SYSTEm ovERvIEw, PART 1 .............................................................................. 7

SYSTEm ovERvIEw, PART 2 .............................................................................. 8

SERvICE And TESTIng SChEduLE .................................................................... 9

mKII SERvICE KITS .......................................................................................... 10

fACE mASK gREY nR ....................................................................................... 11

fACE mASK bLACK nR ..................................................................................... 12

fACE mASK YELLow SILIConE ........................................................................ 13

fACE mASK bLACK SILIConE .......................................................................... 14

dIvAToR hATCh ................................................................................................ 15

bREAThIng vALvE wIThouT SAfETY PRESSuRE bLACK ................................. 16

dIAPhRAgm ATTAChmEnT, w/o SP, bLACK ...................................................... 17

bREAThIng vALvE wITh SAfETY PRESSuRE bLACK ....................................... 18

dIAPhRAgm ATTAChmEnT, w. SP, bLACK ........................................................ 19

bREAThIng vALvE "oCToPuS" w/o SP, bLACK ................................................. 20

dIAPhRAgm ATTAChmEnT "oCToPuS", w/o SP, bLACK ................................... 21

bREAThIng vALvE wIThouT SAfETY PRESSuRE gREY .................................... 22

dIAPhRAgm ATTAChmEnT, w/o SP, gREY ....................................................... 23

bREAThIng vALvE wITh SAfETY PRESSuRE gREY ......................................... 24

dIAPhRAgm ATTAChmEnT, w. SP, gREY .......................................................... 25

REguLAToR wITh wARnIng ............................................................................ 26

wARnIng dEvICE ............................................................................................ 27

REguLAToR ..................................................................................................... 28

REguLAToR wIThouT wARnIng ...................................................................... 29

dIvAToR bCw - wIng TYPE buoYAnCY ComPEnSAToR .................................. 30

bCw - InfLAToR .............................................................................................. 31

bCw - ExhAuST vALvE ASSEmbLY ................................................................... 32

hARnESS, CYLIndER PACK ............................................................................. 33

hARnESS, SIngLE CYLIndER .......................................................................... 34

CYLIndER, SIngLE 316 STEEL ......................................................................... 35

CYLIndER, PACK 324 STEEL ............................................................................ 36

CYLIndER, PACK 326 STEEL............................................................................ 37

CYLIndER, PACK 326.7 ComPoSITE ............................................................... 38

CYLIndER vALvE, ComPoSITE (TYPE I) ........................................................... 39

CYLIndER vALvE, ComPoSITE (TYPE II) ......................................................... 40

wEIghT, ComPoSITE ....................................................................................... 41

�

SYSTEm ovERvIEw, PART 1

3/8-24 UNF

Thread

NOTE! ONLY FOR NON EC COUNTRIES

336 101 161 (Black facemask, silicone)Includes: 336 101 152 Cover assy.

336 101 149 (w. SP)

Includes: 336 190 017 Cover assy.336 190 901 (Yellow facemask, silicone)

96 319-01 / 96 319-02

336 190 354 (w. SP)grey

grey336 190 345 (w/o SP)

DIVATOR

grey336 190 354 (w. SP)

grey336 190 345 (w/o SP)

336 190 017grey

336 190 017grey

DIVATOR

Includes: 336 190 017 Cover assy.

96 319-03 / 96 319-04336 190 852 (Grey facemask, natural rubber)

2

L = 820 mm

3

336 190 389

336 101 152

black

black336 101 150 (w/o SP)

black

DIVATOR

96 319-05 / 96 319-06

4

1

96 319-10 / 96 319-11

Includes: 336 101 152 Cover assy.97 771-01 (Black facemask, NR)

DIVATOR

black336 101 150 (w/o SP)

336 101 149 (w. SP)black

black336 101 152

97 199-0299 422-01black/yellow

460 190 505

460 190 528

99 007-01

L = 1.7 m

97 265-03 (Black facemask, silicone)Includes: 336 101 152 Cover assy.and 96 962-01 Visor w. Hatch

336 101 149 (w. SP)

Includes: 336 190 017 Cover assy. and 96 962-01 Visor w. Hatch

970265-02 (Yellow facemask, silicone)

96 319-14 / 96 319-15

336 190 354 (w. SP)grey

grey336 190 345 (w/o SP)

DIVATOR

grey336 190 354 (w. SP)

grey336 190 345 (w/o SP)

336 190 017grey

336 190 017grey

DIVATOR

Includes: 336 190 017 Cover assy.and 96 962-01 Visor w. Hatch

96 319-12 / 96 319-1397 265-01 (Grey facemask, natural rubber)

336 101 152

black

black336 101 150 (w/o SP)

black

DIVATOR

96 319-16 / 96 319-17

1

96 319-20 / 96 319-21

Includes: 336 101 152 Cover assy.and 96 962-01 Visor w. Hatch

97 265-04 (Black facemask, NR)

DIVATOR

black336 101 150 (w/o SP)

336 101 149 (w. SP)black

black336 101 152

1000

300

350bar 200

1000

300

350bar 200

1000

300

350bar 200

1000

300

350bar 200

99 083-02 & -06 99 083-04 & -08

99 083-03 & -0799 083-01 & -05

336 191 075

336 190 377

1000

300

350bar 200

350 300

0

100

bar 200

�

SYSTEm ovERvIEw, PART 2 for cyl. pack.336 190 975

5

336 190 3893 Regulator hose assy. NOTE! ONLY FOR NON EC COUNTRIES

96 313-06 Mask with breathing valve



336 190 347

4

1

Breathing valve w. mouth piece




Part No.

336 190 901 Yellow, Silicone

336 190 901 Yellow, Silicone

336 190 852 Gery, NR

336 190 852 Grey, NR

336 101 161 Black, silicone

336 101 161 Black, silicone

97 771-01 Black, NR

98 771-01 Black, NR

97 265-01 Grey, NR

98 265-01 Grey, NR

97 265-02 Yellow, Silicone

98 265-02 Yellow, Silicone

97 265-03 Black, Silicone

98 265-03 Black, Silicone

97 265-04 Black, NR

97 265-04 Black,NR

Facemask

Grey336 190 345

Breathing valve

336 190 345 Grey (w/o SP)

336 190 354 Grey (w SP)

336 190 345 Grey (w/o SP)

336 190 354 Grey (w SP)

336 101 150 Black (w/o SP)

336 101 149 Black (w SP)

336 101 150 Black (w/o SP)

336 101 149 Black (w SP)

336 190 345 Grey (w/o SP)

336 190 354 Grey (w SP)

336 190 345 Grey (w/o SP)

336 190 354 Grey (w SP)

336 101 150 Black (w/o SP)

336 101 149 Black (w SP)

336 101 150 Black (w/o SP)

336 101 149 Black (w SP)

336 190 017 Grey

336 190 017 Grey

336 190 017 Grey

336 190 017 Grey

336 101 152 Black

336 101 153 Black

336 101 154 Black

336 101 155 Black

336 190 017 Grey

336 190 017 Grey

336 190 017 Grey

336 190 017 Grey

336 101 152 Black

336 101 153 Black

336 101 154 Black

336 101 155 Black

Cover

97 199-01 Breathing valve w. mouth piece 336 101 150 Black

Part No. Breathing valve Mouth piece Hose clamp

460 190 505 460 190 528

460 190 505 460 190 528



Regulator unit Valve hose

336 190 339

336 190 339

Part No.

99 083-01 Regulator psi RV Sw

99 083-02 Regulator psi RV Sw HUD

99 083-03 Regulator psi Sw BOV

99 083-04 Regulator psi Sw HUD BOV2

336 190 975

5

Harness, for cylinder pack

99 095

99 095-01 Divator BCW - Small

99 095-02 Divator BCW - Medium

99 095-03 Divator BCW - Large

99 095-04 Divator BCW - XLarge

97 199-02 Breathing valve w. mouth piece 99 422-01 Black/Yellow 460 190 505 460 190 528









336 190 339

336 190 339

Octopus hose

99 007-01

BOV = Bail Out-Valve

HUD = Heads Up Display

Sw = Swivle

RV = Reserve Valve

BCW = Buoyancy Compensating Wing

336 190 33999 083-05 Regulator Bar RV Sw

336 190 33999 083-06 Regulator Bar RV Sw HUD

336 190 33999 083-07 Regulator Bar Sw BOV

336 190 33999 083-08 Regulator Bar Sw HUD BOV

336 190 339336 190 377 Reg.unit with warning device, complete

336 190 339336 191 075 Reg.unit without warning, complete

336 190 980

336 190 981

�

SERvICE And TESTIng SChEduLE

#

Regulator unit2

APPARATUS/cOMPONENT

This schedule is only valid for diving equipment. The schedule shows the minimumrequirements for service and testing as recommended by Interspiro. Local requirements may differ

due to environmental condititions and frequency of use. To ensure trouble free operation it is advisable to replace parts included in the service kit in accordance with the schedule below.

BE

fO

RE

US

E

Af

TE

R U

SE

Ev

ER

Y Y

EA

R

Ev

ER

Y 6

TH

YE

AR

Regulator2.1

Harness3

= visual inspectionv

= cleaningc

= cleaning and disinfectionD

= Short user testS

= full inspection and performance testsf

High Pressure Hoses2.3

Warning Device2.2

S

Cylinder Valve5.1

face Piece1

Breathing Valve1.3

Cylinder5.2

Mouth Piece1.2

Full Face Mask1.1

Bcw4

Periodic inspection to be performed in accordancewith national regulations

v

v

D

c

f **

S vc

Medium Pressure Hoses2.4

c

S

S

v

v v

f

R

R

S

v

v

R

v

f R

v

* Renew maintenance parts if necessary. ** Service is adviced to be made in the same periodic interval as cylinders, however it must be done at least every 6 years.

f

*

*

*

R = Renew

Scylinder/cylinder pack5 vc

*

*

* *

R

10

mKII SERvICE KITS

All service kits and service parts listed below shall be replaced during service.

1.1 fULL fAcE MASK - EvERY YEAR A 460 190 900 Service kit for 1 apparatus See page 11-14 B 460 190 901 Service kit for 10 apparatus See page 11-14 1.3 BREATHING vALvE - EvERY YEAR A 336 190 226 Service part for 10 apparatus See page 16, 18, 22 & 24 1.3 BREATHING vALvE - EvERY 6 YEARS A 460 190 902 Service kit for 1 apparatus See page 17, 21 & 23 B 460 190 903 Service kit for 10 apparatus See page 17, 21 & 23 A 460 190 904 Service kit for 1 apparatus See page 19 & 25 B 460 190 905 Service kit for 10 apparatus See page 19 & 25 2.1 REGULATOR - EvERY YEAR A 346 190 643 Service part for 10 apparatus See page 28 B 336 190 272 Service part for 10 apparatus See page 28 C 346 190 644 Service part for 100 apparatus See page 28 D 460 190 237 Service part for 100 apparatus See page 28 2.1 REGULATOR - EvERY 6 YEARS A 460 190 906 Service kit for 1 swivel See page 26 & 29 B 460 190 907 Service kit for 10 swivels See page 26 & 29 A 460 190 910 Service kit for 1 apparatus See page 28 B 460 190 911 Service kit for 10 apparatus See page 28 A 460 190 912 Service kit for 1 apparatus See page 29 B 460 190 913 Service kit for 10 apparatus See page 29 2.2 wARNING DEvIcE - EvERY 6 YEARS A 460 190 908 Service kit for 1 apparatus See page 27 B 460 190 909 Service kit for 10 apparatus See page 27 4.1 cYLINDER vALvE - EvERY 6 YEARS* A 460 190 914 Service kit for 1 apparatus See page 39 B 460 190 915 Service kit for 10 apparatus See page 39

5.1 Bcw - EvERY 6 YEARS A 99 568-01 Service kit for 1 apparatus See page 31

* Service is adviced to be made in the same periodic interval as cylinders, however it must be done at

least every 6 years.

11

# SPARE PART ORDER # NOTES

• Divator Mask, grey NR 336 190 852

1 Inner mask assy. grey NR 460 190 543 Incl. #2-3

2 Non-return valve disc 336 190 264 10-pack

3 Valve seat assy. grey 460 190 550 2 pack. Incl. #2

4 Screw 336 190 246 10-pack

5 Screw 336 190 489 10-pack

6 Retaining plate 460 190 398

7 O-ring 336 190 222 5-pack

8 Circlip 336 190 255 10-pack

9 Screw 460 190 300 10-pack

10 Cover assembly, grey 336 190 017 Incl. #7-9

11 Mask body assy. grey NR 460 190 545 Incl. #12

12 Buckle assy. 460 190 541 5-pack

13 Visor frame kit MK II, grey 460 190 548 Incl. #14-15

14 Screw 336 190 409 10-pack


15 Spacer 336 190 554 10-pack

16 Visor MK II 336 190 850

17 Head harness, grey NR 460 190 375

18 Pressure equalizer 336 190 373 Incl. #5&19

19 Pressure equalizing pad 460 190 513

20 Visor with Divator hatch 96 962-01

# SERvIcE KIT PART NR. NOTES

A Service kit for 1 apparatus Divator MKII face mask 460 190 900 – 1 singular item of each of #7– 2 singular items of each of #2

B Service kit for 10 apparatus Divator MKII face mask 460 190 901 – 10 singular item of each of #7– 20 singular items of each of #2

fACE mASK gREY nR

4

5

2

16

11

12

8 8

99

7

17

14 15

6

18

19

3

1

13

10

(see page 15) 20

12

fACE mASK bLACK nR


• Divator Mask, black NR 97 771-01

1 Inner mask assy. black silicone 460 190 542 Incl. #2-3


3 Valve seat assy. black 460 190 549 2 pack. Incl. #2

4 Screw 336 190 246 10-pack

5 Screw 336 190 489 10-pack


7 O-ring 336 190 222 5-pack

8 Circlip 336 190 255 10-pack

9 Screw 460 190 300 10-pack

10 Cover assembly, black 460 190 555 Incl. #7-9

11 Mask body assy. black NR 97 820-51 Incl. #12


13 Visor frame kit MK II, black 460 190 547 Incl. #14-15

14 Screw 336 190 409 10-pack


15 Spacer 336 190 554 10-pack

16 Visor MK II 336 190 850

17 Head harness, black NR 460 190 457







4

5

2

16

11

12

8 8

99

7

17

14 15

6

18

19

3

1

13

10

(see page 15) 20

13

fACE mASK YELLow SILIConE


• Divator Mask, yellow silicone 336 190 901

1 Inner mask assy. yellow silicone 336 190 909 Incl. #2-3


3 Valve seat assy. grey 460 190 550 2 pack. Incl. #2

4 Screw 336 190 246 10-pack

5 Screw 336 190 489 10-pack


7 O-ring 336 190 222 5-pack

8 Circlip 336 190 255 10-pack

9 Screw 460 190 300 10-pack

10 Cover assembly, grey 336 190 017 Incl. #7-9

11 Mask body assy. yellow silicone 336 190 908 Incl. #12


13 Visor frame kit MK II, grey 460 190 548 Incl. #14-15

14 Screw 336 190 409 10-pack


15 Spacer 336 190 554 10-pack

16 Visor MK II 336 190 850

17 Head harness, grey NR 460 190 375







4

5

2

16

11

12

8 8

99

7

17

14 15

6

18

19

3

1

13

10

(see page 15) 20

14

fACE mASK bLACK SILIConE


• Divator Mask, black silicone 336 101 161

1 Inner mask assy. black silicone 460 190 542 Incl. #2-3


3 Valve seat assy. black 460 190 549 2 pack. Incl. #2

4 Screw 336 190 246 10-pack

5 Screw 336 190 489 10-pack


7 O-ring 336 190 222 5-pack

8 Circlip 336 190 255 10-pack

9 Screw 460 190 300 10-pack

10 Cover assembly, black 460 190 555 Incl. #7-9

11 Mask body assy. black silicone 460 190 544 Incl. #12


13 Visor frame kit MK II, black 460 190 547 Incl. #14-15

14 Screw 336 190 409 10-pack


15 Spacer 336 190 554 10-pack

16 Visor MK II 336 190 850

17 Head harness, black NR/CR 460 190 520







4

5

2

16

11

12

8 8

99

7

17

14 15

6

18

19

3

1

13

10

(see page 15) 20

dIvAToR hATCh

15

dIvAToR hATCh


• Divator Hatch Assy 96 962-01 Not sold w/o Visor

A Maintenance kit Hatch, 1-pack 97 220-01 Incl. single item of # 7, 9, 11, 12 and two items of #10. Item # 6 not included.

B Maintenance kit Hatch, 10-pack 97 220-02 Incl. 10 item of # 7, 9, 11, 12 and 20 items of #10. Item # 6 not included.

6 Valve disc 97 203-51 Single pack

1

2

43

5

8

6

7

11

9

10

12

13

16

bREAThIng vALvE wIThouT SAfETY PRESSuRE bLACK


• Breathing valve (w/o SP) 336 101 150 for face mask

• Breathing valve (w/o SP) 97 199-01 with mouth piece

1 Diaphragm attachment 336 101 155

2 Valve housing MK II, black w/o SP 336 101 156 Incl. #10-13

3 Counter pressure assy. w/o SP 460 190 588

4 Connection nipple 460 190 396 Incl. #5, 6

5 O-ring 336 190 227 10-pack

6 O-ring, green 99 486-51 10-pack

7 Retaining ring 346 190 198 10-pack

8 Valve insert assy. w/o SP 460 190 558 Incl. #3-7, 14-15

9 Mouthpiece assy. 336 190 353 Incl. #17

10 Non-return valve assy. 460 190 559

11 O-ring, only used with 336 190 226 10-pack face mask


12 Nut, black 460 190 516 5-pack

13 Sealing plug 460 190 511 5-pack

14 Balancing diaphragm 460 190 409 5-pack

15 Valve cone assy. 336 190 064

16 Valve insert sub assy. w/o SP 97 083-51 Incl. #3, 14-15

17 Mouth piece 460 190 505

# SERvIcE PARTS PART NR. NOTES

A Service part for 10 apparatus 336 190 226 – 10 singular items of each of #11

3 4 5 67

10

11

13

12

14 15

17 9

16

8

1 (see page 17)

2

dIAPhRAgm ATTAChmEnT, w/o SP, bLACK

1�

dIAPhRAgm ATTAChmEnT, w/o SP, bLACK

34 2922 23 28 30 2025 26 3121 24 3227 33

35


20 Locking ring, black 460 190 515 5-pack

21 Shield ring 346 190 197 5-pack

22 Cover with purge button, black 460 190 518

23 Guide disc 460 190 412

24 Sealing spring 460 190 500 5-pack

25 Sealing disc 460 190 393 5-pack

26 Exhalation diaphragm 346 190 196 5-pack

27 Securing ring 460 190 413 10-pack

28 Diaphragm ring 460 190 394

29 Guide pin 346 190 194 10-pack

30 Diaphragm 460 190 140

31 Diaphragm holder 460 190 395

32 O-ring 336 190 224 5-pack

33 Washer 336 190 638 10-pack

34 Purge button 336 190 487 5-pack

35 Diaphragm assembly 336 190 360 Incl. #25-33


36 Lever Assy 460 190 522

37 Lever support 460 190 504 5 pack

38 Sealing sleeve 346 190 246 5 pack

39 Centre spindle 460 190 406 Incl. #5

40 Adjusting nut 346 190 247 5 pack

41 Sealing spring w/o SP 460 190 501 5 pack

42 Pin 336 190 258 10 pack

43 Lifting spindle 460 190 408

44 Balancing diaphragm 460 190 409 5 pack

45 Valve cone 336 190 064

46 Sealing piston 336 190 284 Incl. #43-45

# SERvIcE KIT PART NR.

A Service kit for 1 apparatus 460 190 902 Breathing valve w/o safety pressure – 1 singular item of each of #5/6/10/11/16/35

B Service kit for 10 apparatus 460 190 903 Breathing valve w/o safety pressure – 10 singular item of each of #5/6/10/11/16/35

383736

43 4441

39

46

45

40

42

16

1�

bREAThIng vALvE wITh SAfETY PRESSuRE bLACK


• Breathing valve (w. SP) 336 101 149


2 Valve housing MK II, black w. SP 336 101 158 Incl. #9-11, 14-15

3 Counter pressure assy. w. SP 460 190 589


5 O-ring 336 190 227 10-pack

6 O-ring 336 190 228 10-pack


8 Valve insert assy. w. SP 336 190 357 Incl. #3-7, 12-13


10 O-ring, only together with 336 190 226 10-pack face mask


11 Nut, black 460 190 516 5-pack



14 Lever assy. 336 190 142 Incl. #15

15 O-ring 336 190 225 10-pack

16 Valve insert sub assy. w. SP 97 028-51 Incl. #3, 12-13



3 4 5 6

7

9

10

11

14d

15

14b

14a

14c

12 13

1 (see page 19)

2

16

8

14

dIAPhRAgm ATTAChmEnT, w. SP, bLACK

1�

dIAPhRAgm ATTAChmEnT, w. SP, bLACK





23 Guide disc 460 190 412






29 Guide pin 346 190 194 10-pack

30 Diaphragm 460 190 140


32 O-ring 336 190 224 5-pack

33 Washer 336 190 638 10-pack



34 2922 23 28 30 2025 26 3121 24 3227 33

35


36 Lever Assy 460 190 522





41 Sealing spring w. SP 460 190 509 5 pack

42 Pin 336 190 258 10 pack



45 Valve cone 336 190 064

46 Sealing piston 336 190 284 Incl. #43-45 # SERvIcE KIT PART NR.

A Service kit for 1 apparatus 460 190 904 Breathing valve w safety pressure – 1 singular item of each of #5/6/9/10/14/16/35

B Service kit for 10 apparatus 460 190 905 Breathing valve w safety pressure – 10 singular item of each of #5/6/9/10/14/16/35

383736

43 4441

39

46

45

40

42

16

20

bREAThIng vALvE "oCToPuS" w/o SP, bLACK


• Breathing valve (w/o SP) 97 199-02 with mouthpiece

1 Diaphragm attachment 99 484-01

2 Valve housing MK II, black w. SP 336 101 158 Incl. #9, 11, 14

3 Counter pressure assy. w/o. SP 460 190 588


5 O-ring 336 190 227 10-pack






11 Nut, black 460 190 516 5-pack



14 Lever assy. 336 190 142 Incl. #15

15 O-ring 336 190 225 10-pack


17 Mouth piece 460 190 505

18 Mouth piece assy. 336 190 353 Incl. #17

19 Octopus holder 88 115-51


A Service part for 1 apparatus 97 083-51 – singular items of each of #16

14

2

11

9

19

18

1 (see page 21)

16

8

7

45 6

12 133

14d

14b14c

14a

15

17

dIAPhRAgm ATTAChmEnT "oCToPuS", w/o SP, bLACK

21

dIAPhRAgm ATTAChmEnT "oCToPuS", w/o SP, bLACK



21 Shield ring, yellow 99 485-51 5-pack


23 Guide disc 460 190 412






29 Guide pin 346 190 194 10-pack

30 Diaphragm 460 190 140


32 O-ring 336 190 224 5-pack

33 Washer 336 190 638 10-pack



34 22 2321 24

35


36 Lever Assy 460 190 522






42 Pin 336 190 258 10 pack



45 Valve cone 336 190 064




2928 30 2025 26 31 3227 33

383736

43 4441

39

46

45

40

42

16

22

bREAThIng vALvE wIThouT SAfETY PRESSuRE gREY


• Breathing valve (w/o SP) 336 190 345 for face mask

• Breathing valve (w/o SP) 336 190 347 with mouthpiece


2 Valve housing MK II, grey w/o SP 336 190 408 Incl. #10-13

3 Counter pressure assy. w/o SP 460 190 588


5 O-ring 336 190 227 10-pack




9 Mouthpiece assy. 336 190 353 Incl. #17




12 Nut, grey 346 190 201 5-pack

13 Sealing plug 460 190 511 5-pack




17 Mouth piece 460 190 505



3 4 5 67

10

11

13

12

14 15

17 9

16

8

1 (see page 23)

2

dIAPhRAgm ATTAChmEnT, w/o SP, gREY

23

dIAPhRAgm ATTAChmEnT, w/o SP, gREY


20 Locking ring, grey 346 190 193 5-pack


22 Cover with purge button, grey 96 343-51

23 Guide disc 460 190 412






29 Guide pin 346 190 194 10-pack

30 Diaphragm 460 190 140


32 O-ring 336 190 224 5-pack

33 Washer 336 190 638 10-pack




36 Lever Assy 460 190 522






42 Pin 336 190 258 10 pack



45 Valve cone 336 190 064


A Service kit for 1 apparatus 460 190 902 Breathing valve w/o safety pressure – 1 singular item of each of #5/6/10/11/16/35

B Service kit for 10 apparatus 460 190 903 Breathing valve w/o safety pressure – 10 singular item of each of #5/6/10/11/16/35

34 22 2321 24

35

2928 30 2025 26 31 3227 33

383736

43 4441

39

46

45

40

42

16

24

bREAThIng vALvE wITh SAfETY PRESSuRE gREY


• Breathing valve (w. SP) 336 190 354

1 Diaphragm attachment w. SP 336 190 356

2 Valve housing MK II, grey w. SP 336 190 379 Incl. #9-11, 14-15

3 Counter pressure assy. w. SP 460 190 589


5 O-ring 336 190 227 10-pack

6 O-ring 336 190 228 10-pack


8 Valve insert assy. w. SP 336 190 357 Incl. #3-7, 12-13




11 Nut 346 190 201 5-pack



14 Lever Assy 336 190 142 Incl. #15

15 O-ring 336 190 225 10-pack

16 Valve insert sub assy. w. SP 97 028-51 Incl. #3, 12-13



3 4 5

7

9

10

14d

15

14b

14a

14c

12 13

1 (see page 25)

2

16

8

11

6

14

dIAPhRAgm ATTAChmEnT, w. SP, gREY

25

dIAPhRAgm ATTAChmEnT, w. SP, gREY


20 Locking ring, grey 346 190 193 5-pack


22 Cover with purge button, grey 96 343-51

23 Guide disc 460 190 412






29 Guide pin 346 190 194 10-pack

30 Diaphragm 460 190 140


32 O-ring 336 190 224 5-pack

33 Washer 336 190 638 10-pack




36 Lever Assy 460 190 522





41 Sealing spring w. SP 460 190 509 5 pack

42 Pin 336 190 258 10 pack



45 Valve cone 336 190 064




34 22 2321 24

35

2928 30 2025 26 31 3227 33

383736

43 4441

39

46

45

40

42

16

26

REguLAToR wITh wARnIng


1 a. Regulator 336 190 377 Incl. #5-7, 10-12, 14-20 b. Regulator, psi, RV, Sv 99 083-01 Incl. #5-7, 10-12, 14-16, 19-21

2 Regulator with Suit Infl. Hose 97 366-01 Incl. #1, 3b, 4

3 a. Drysuit inflation hose, G1/8" 97 474-51 550 mm b. —||— 336 190 346 750 mm

4 Swivel, G1/8"-1/8" 336 190 348 Incl. #8-9

5 Protective cap 336 190 257 3-pack

6 Breathing valve supply hose 460 190 560

7 Protective cap, G 5/8" 460 190 557 10-pack

8 O-ring x2 for #4 336 190 312 10-pack

9 O-ring for #4 336 190 634 10-pack

10 O-ring for #6 336 190 236 10-pack

11 O-ring for #6 336 190 237 10-pack

12 O-ring 336 190 228 10-pack

13 O-ring for #3 460 190 599 10-pack


14 High pressure hose 336 190 265

15 Low pressure hose 336 190 288

16 O-ring for #14, 15 336 190 221 10-pack

17 Plug w. O-ring, G1/8" 460 190 418

18 O-ring for #17 336 190 312 10-pack

19 O-ring for #15 336 190 311 10-pack

20 O-ring for #14 336 190 253 10-pack

21 Swivel, 4 port 99 014-51


A Service kit for 1 swivel 460 190 906 Swivel, G1/8"-1/8" (#4) – 1 singular item of each of #9– 2 singular items of each of #8

B Service kit for 10 swivels 460 190 907 Swivel, G1/8"-1/8" (#4) – 10 singular item of each of #9– 20 singular items of each of #8

6

3

5

7

11

12

10

13

15

14

17, 18

16

19

16

4

8

9

See warning device, page 27

20

14 16

15 197

21

a

b

1

2

1322

23

2�

wARnIng dEvICE


• Warning Device, Divator MKII Incl. #1-29 1 Cap 460 190 421 10-pack 2 Split pin 336 190 380 10-pack 3 Nut 460 190 441 5-pack 4 Handle 460 190 433 5-pack 5 Torsion spring 460 190 430 5-pack 6 Nipple 460 190 428 5-pack 7 O-ring 336 190 381 10-pack 8 O-ring 336 190 382 10-pack 9 Valve stem 336 190 404 Incl. #8, 10 & 26 10 Valve disc 336 190 383 5-pack 11 O-ring 336 190 240 5-pack 12 Guide bushing, RV 460 190 439 5-pack 13 Spring 460 190 437 5-pack 14 Piston, RV 460 190 431 5-pack 15 O-ring 336 190 384 10-pack 16 Plug 460 190 442 5-pack 17 O-ring 336 190 228 10-pack 18 Front and back cover 460 190 427 19 Protective cap 336 190 257 3-pack

20 a. Pressure gauge assy., Bar 336 190 776 Incl. #21 b. Pressure gauge, PSI 99 265 -52

21 Pressure gauge cover, diving 99 266-53


22 Screw 336 190 247 10-pack 23 O-ring for #24 336 190 235 10-pack 24 High pressure hose 460 190 527 25 Retaining clip 460 190 503 26 O-ring for #9 336 190 595 10-pack 27 Cone with O-ring 460 190 369 28 Quick coupling 460 190 485 IS 29 Non-return valve 346 190 223 Incl. #27 30 High pressure connection 460 190 705 Incl. #36 31 O-ring 336 190 381 10-pack 32 Plug 7/16-20 EN250 97 192-01 33 Piston, bail-out valve 96 728 34 HUD Warning device 89 100-04 35 O-ring 89 137-51

36 Gasket set 336 190 159

37 Label Bail-out 96 554-51

38 Protective spiral 95 846-53 2-pack


A Service kit for 1 apparatus 460 190 908 Warning device – 1 singular item of each of #2/4/5/7/8/10/11/15/17/26/27 B Service kit for 10 apparatus 460 190 909 Warning device – 10 singular items of each of #2/4/5/7/8/10/11/15/17/26/27

1 4

2

3 5 7 6

28

20

1615

17

19

18

2223

24

25

9

29

27

12 13 1411

268 10

21

31

30

3236

35

33 13

bov

Rv

34

37

38

2�

24 19 151617

1418

23 22 20 7109 68 5 4 3

25

21

11

12

13

2627


• Pressure regulator 460 190 585

1 Plug w. O-ring, G1/8" 460 190 418

2 O-ring 336 190 312 10-pack

3 Cover 460 190 506

4 O-ring 336 190 229 10-pack

5 Diffuser 460 190 564

6 Stop ring 460 190 424 5-pack

7 Piston 460 190 420

8 O-ring 336 190 230 10-pack

9 Regulating spring 460 190 422 5-pack

10 Spring 460 190 484 5-pack

11 a. Inlet filter 346 190 643 10-pack b. —||— 346 190 644 100 pack

12 a. O-ring 336 190 272 10-pack b. —||— 460 190 237 100-pack

13 Nipple 460 190 382

14 Supporting washer 336 190 637 10-pack

15 O-ring 336 190 233 10-pack

16 Spring 346 190 028 5-pack

17 Seat, Regulator 460 190 591 10-pack

18 O-ring 336 190 231 10-pack

19 Adjusting screw 460 190 425 5-pack

20 Sealing plate 336 190 256 25-pack

21 Valve seat set 460 190 648 Incl. #14-18

22 Anti Freezing cap 460 190 507 5-pack

23 Anti Freezing cover 460 190 523

24 Clamp, stainless 460 190 526

25 Connection nipple 460 190 383

26 O-ring 336 190 232 10-pack

27 Hand wheel connector 460 190 385

28 Diffusor 99 038-51 10-pack

29 Axis ---


30 O-ring 336 190 237 10-pack

31 Swivel house ---

32 Blind plug with Oring 460 190 755

33 Washer 99 013-51 10-pack

34 Screw 98 939-51 10-pack

35 O-ring for # 32 460 190 529 10-pack

36 Swivel, 4 port 99 014-51

# SERvIcE PARTS PART NR.

A Service part for 10 apparatus 346 190 643 – 1 singular item of each of #11

B Service part for 10 apparatus 336 190 272 – 1 singular item of each of #12

C Service kit for 100 apparatus 346 190 644 – 1 singular item of each of #11

D Service part for 100 apparatus 460 190 237 – 1 singular item of each of #12


A Service kit for 1 apparatus 460 190 910 Regulator – 1 singular item of each of #2/4/8/11/12/15/17/18/20/22– 2 singular items of each of #14

B Service kit for 10 apparatus 460 190 911 Regulator – 10 singular items of each of #2/4/8/11/12/15/17/18/20/22– 20 singular items of each of #14

REguLAToR

1

2

28 29 30 31

32

32

33 34

35

3536

2�

REguLAToR wIThouT wARnIng

10

121, 22

6

3

5

7

11

12

13

15

14

16, 17

18

19

11

20

23

24


1 Regulator 336 191 075 Incl. #5-7, 10-12, 14-26

2 Regulator with Suit Infl. Hose 97 480-01 incl. #1, 3b, 4

3a Drysuit inflation hose 97 474-51 550 mm

3b Drysuit inflation hose 336 190 346 750 mm

4 Swivel LP, G1/8"-1/8" 336 190 348

5 Protective cap 336 190 257 3-pack

6 Breathing valve supply hose 460 190 560

7 Protective cap, G 5/8" 460 190 557

8 O-ring x2 for #4 336 190 312 10-pack

9 O-ring for #4 336 190 634 10-pack

10 O-ring for #6 336 190 236 10-pack

11 O-ring for #6, 15 336 190 237 10-pack

12 O-ring x2 for #26 336 190 228 10-pack

13 O-ring for #3 460 190 599 10-pack

14 High pressure hose 336 190 936

15 Low pressure hose 336 190 898

16 Plug w. O-ring, G1/8" 460 190 418

17 O-ring for #17 336 190 312 10-pack

18 O-ring for #14 336 190 221 10-pack

19 O-ring till #15 336 190 311 10-pack

20 O-ring 336 190 235


21 Pressure gauge assy 460 190 381 incl. #2

22 Rubber cover 99 266-51

23 Non return valve kpl 346 190 223

24 O-ring for #26 346 190 069 10-pack

25 Extra air manifold, E-10 346 190 040 Incl. #5/12 & 23/24/26

26 Quick coupling 96 531-51

27 Cone w. O-ring 460 190 369


A Service kit for 1 apparatus 460 190 906 Swivel, G1/8"-1/8" (#4) – 1 singular item of each of #9– 2 singular items of each of #8

B Service kit for 10 apparatus 460 190 907 Swivel, G1/8"-1/8" (#4) – 10 singular item of each of #9– 20 singular items of each of #8

C Service kit for 1 apparatus 460 190 912 Extra air manifold, E-10 (#25) – 1 singular item of each of #24/27– 2 singular items of each of #12

D Service kit for 10 apparatus 460 190 913 Extra air manifold, E-10 (#25) – 10 singular items of each of #24/27– 20 singular items of each of #12

25

4

8

9

5

26

27

30

dIvAToR bCw - wIng TYPE buoYAnCY ComPEnSAToR


1 a. Divator BCW Small 99 095-01 b. Divator BCW Medium 99 095-02 c. Divator BCW Large 99 095-03 d. Divator BCW Extra large 99 095-04

2 a. Sholder strap small 99 540-01 b. Sholder strap medium 99 540-02 c . Sholder strap large 99 540-03 d. Sholder strap x-large 99 540-04

3 Divator BCW Full Inflator Assy 99 541-01

4 Sternum stap assy 99 542 -01

5 a. Rip--Cord Assy with lead fastner 99 543-01 b. Rip-Cord Handle replacement Velcro strip 99 544-01

6 Over pressure valve assy 99 545-01

7 Cumberbund Waist Panel (pair) 99 546-01

8 Screw set (male & female) 99 547-01 For # 7, not shown

9 a. Outer bladder Cover Assy 99 548-01 Incl. # 9b & 2 pcs of # 6 b. Inner Bladder 99 549-01 not shown

10 Rail Assy for BCW 99 550-01 compl. incl. mount

11 Rail for BC 460 190 554

12 Divator BCW mount spacer 99 091-51 Pair

13 Screw 99 416-51 10-pack

14 Locking assy 99 551-01

15 Holder strap for Reserve Manifold 99 099-01

2 3

4

5

66 7 911

10

13

12

14

11

13

12

1

15

31

bCw - InfLAToR


• BCW Infaltor 99 552-01

1 Label sticker 99259-51 10-pack

2 Screw 99 553-01

3 Inflate button 99 554-01

4 Pin 99 555-01

5 O-ring 99 556-51 10-pack

6 Dump valve 99 557-01

7 QD Fitting 99 558-01

8 O-ring 99 559-51

9 O-ring 99 560-51

10 Inflate shaft 99 561-01

11 Spring, Inflate valve 99 562-01

12 Valve insert assy 99 563-01

13 Inflator housing -

14 Spring, Dump valve 99 564-01


15 O-ring 99 565-51 10-pack

16 Dump button 99 566-01

17 Mouthpice 99 567-51 5-pack

18 Tie wrap (not shown) 97 824-51 10-pack

# SERvIcE PARTS PART NR.

19 BCW Power inflator Service Kit 99568-01– 1 singular item of each of #1, 5, 9, 10, 11, 12 and 15– two pices of item # 18

1 2 3

4

5

6

7

8

9 10 11 12

13

14

15

16

17

32

bCw - ExhAuST vALvE ASSEmbLY


1 BCW Exhaust valve gasket 99 569-01

2 Valve seat 99 570-01

3 O-ring 99 571-01

4 One vay valve 99 572-01

5 Cap for exhaust valve 99 573-01

1

3 4 52

33

11


• Harness 336 190 975

1 Shoulder straps 460 190 524

2 Waist buckle assy 346 190 112

3 Webbing buckle 460 190 373 2-pack

4 Backplate 460 190 590

5 Clamping plate 460 190 302 10-pack

6 Hook 460 190 572

7 Hook 460 190 573

8 Buckle assy left 346 190 318

9 Buckle assy right 346 190 319

10 Locking nut 336 190 453 10-pack

11 Screw 460 190 574

hARnESS - CYLIndER PACK

7

2

1 1

12

5, 11

3

4

6

9

8

10 11


12 Strap separator hook 336 100 572

13 Locking arm assy 460 190 191

14 Screw 460 190 575

15 Washer 336 190 261 10-pack

13 14

15

34

hARnESS - SIngLE CYLIndER

5, 11

7

2

1

8

1

12

34

9

8

10 11


• Harness 336 190 976 100-140mm

• Harness 336 190 977 140-183mm

1 Shoulder straps 460 190 524

2 Waist buckle assy 346 190 112

3 Webbing buckle 460 190 373 2-pack

4 Backplate 460 190 590

5 Clamping plate 460 190 302 10-pack

6 Hook 460 190 572

7 Hook 460 190 573

8 Buckle assy left 346 190 318

9 Buckle assy right 346 190 319

10 Locking nut 336 190 453 10-pack

11 Screw 460 190 574


12 Strap separator hook 336 100 572

13 Locking arm assy 460 190 191

14 Screw 460 190 575

15 Washer 336 190 261 10-pack

16a Cylinder strap 336 190 575 100-140 mm

16b Cylinder strap 336 190 828 140-183 mm

17 Threaded washer 460 190 576

18a Handle 336 190 836 100-140 mm

18b Handle 336 190 838 140-183 mm

19 Rubber bushing 460 190 597

• Single cylinder mounting kit 336 190 837 100-140 mm incl. (3x#14), #16a, 17, 18a

• Single cylinder mounting kit 336 190 839 140-183 mm incl. (3x#14), #16b, 17, 18b

6

13 14

15

1416

17

18

14

19

35

CYLIndER STEEL - SIngLE 316


• Cylinder, 6 l, DIN 90°, 300 bar 336 190 499

1 Cylinder boot 460 190 462

2 Label Divator MK II 336 100 467

3 O-ring* 460 190 304

4 Cylinder valve, DIN 90°* 95866-51

1

2

3

4

36

CYLIndER STEEL - PACK 324

2

5

11

3

15

17

19

19

6

10

6

3

25

5

11

12

12

13

13

5

15

15

15

9

1

4

2

4


• Cylinder pack 2x4 l 336 190 319


2 Screw 336 190 241 10-pack

3 Guide washer 460 190 472 2-pack

4 Screw 336 190 243 10-pack

5a Screw 460 190 579 2-pack

5b Screw 336 190 242 2-pack

6 Gasket* 460 190 301

7 Spacer bushing 460 190 482 2-pack

9 Cylinder boot 460 190 460 2-pack

10 Cross over tube* 336 190 294

11 Retaining plate 460 190 468 10-pack


12 Clamping strap 460 190 464

13 Spacer 336 190 068

14 Nipple* 460 190 582

15 Protective ring 460 190 219 10-pack

16 Handle section 96 514-51 2-pack

17 Nut 336 190 244 10-pack

18 Cylinder valve* 98 420-12

19 O-ring* 460 190 403

20 Clamping strap assy. 336 190 146

21 Spacing washer 460 190 470 2-pack

7

7

16

16

18

14

21

21

20

3�

CYLIndER STEEL - PACK 326

2

11

3

15

17

19

19

6

10

6

3

2

8, 5

11

12

12

13

13

8, 5

15

15

15

9

1

4

2

4


• Cylinder pack 2x6 l 336 190 615


2 Screw 336 190 241 10-pack

3 Guide washer 460 190 512 2-pack

4 Screw 336 190 243 10-pack

5 Washer 460 190 580 2-pack

6 Gasket* 460 190 301

7 Spacing rod 460 190 620

8 Screw 460 190 581 2-pack

9 Cylinder boot 96 513-51 2-pack

10 Cross over tube* 460 190 473



12 Tension strap 96 500-51 2-pack

13 Spacer 331 100 475

14 Nipple* 460 190 582


16 Handle section 460 190 583 2-pack

17 Nut 336 190 244 10-pack

18 Cylinder valve* 336 190 978 n/a

19 O-ring* 466 190 334 10-pack

16

16

18

14

7

3�

CYLIndER ComPoSITE - PACK 326.7


• Cylinder pack 2x6.7 l 98 857-01

1 Spacing rod 97 501-51

2 Screw 336 190 241 10-pack

3 Guide washer 97 857-52

4 Guide washer 97 857-51

5 Screw 336 190 243 10-pack

6 Gasket* 460 190 301 10-pack

7 Screw 97 825-51

8 Screw 97 506-51

9 Nut 97 507-51

10 Weight shaft 97 502-51



12 Tension strap 97 513-51

13 Spacer 460 190 474

14 Washer 460 190 624 10-pack


16 Handle section 97 337-51 2-pack

17 Nut 336 190 244 10-pack

18 Cylinder valve* 98 420-08

19 O-ring* 460 190 304 10-pack

20 Nipple* 96 412-51 10-pack

21 Cross over tube* 97 358-01

22 Cylinder boot 460 190 463

23 Screw 336 190 243 10-pack

24 Interspiro label 460 190 230 10-pack

2

32

23

1

5

7

8, 14

9

10

11

11

12

12

13

13

4

8, 14

15

15

15

15

17

22

dIvAToR LITE

19

19

6

21

6

2

23

24

16

16

20

18

3�


1 Valve slug 336 922 108 5-pack

2 Valve stem 460 190 355

3 Gland seal 336 190 260 10-pack

4 Gland nut 460 190 356

5 O-ring 336 190 221 10-pack

6 Washer 336 922 104 10-pack

7 Spring 336 922 105 10-pack

8 Hand wheel 460 190 243

9 Screw 336 190 297 10-pack

10 Washer 336 190 296 10-pack

11 Plug w. O-ring 460 190 220 Incl. #13

12 Discharge plug/Drain plug 331 190 800

13 O-ring 336 190 220 10-pack

14 Cylinder support 346 190 230 5-pack


15 O-ring 460 190 304 10-pack

16 Blank plug 460 190 358

17 Burst disc rubber plug 336 190 262 10-pack

18 Safety plug, 300 bar* 331 100 176

19 Burst disk kit* 460 190 225

20 Valve stem set 336 190 298 Incl. #2, 9, 10


A Service kit for 1 apparatus 460 190 914 Cylinder valve, Type I – 1 singular item of each of #1/3/5

B Service kit for 10 apparatus 460 190 915 Cylinder valve, Type I – 10 singular items of each of #1/3/5

16

15

14

17

CYLIndER vALvE, ComPoSITE

13

1

9

46710

5 23

8

1211

19

18

Cylinder valveType I

40

CYLIndER vALvE, ComPoSITE

# DEScRIPTION ORDERING NO. NOTES

1 a. Hand wheel cover, black 460 190 359 5 pack b. —||— , blue 97763-51 5 pack

2 Spring 336 922 105 10 pack

3 Washer 336 922 104 10 pack

4 Gland nut 97 852-51

5 Back-up ring 97 847-51 10 pack

6 O-ring 97 851-51 10 pack

7 Glide washer 97 853-51 10 pack

8 Valve stem 97 849-51

9 Valve slug 97 850-51

10 a. Hand wheel assy, black 460 190 243 b. —||— , blue 95 719-52

11 Washer 336 190 296 10 pack

12 Screw 336 190 297 10 pack

13 Screw 460 190 684 10 pack

The standard hand wheel cover is black. A blue hand wheel cover is used to identify cylinders equipped with an Excess Flow Valve (EFV).

19

1817

# DEScRIPTION ORDERING NO. NOTES

16 O-ring 97 868-51 10 pack

17 Blank plug with O-ring 460 190 220 Incl. #19

18 Discharge plug 331 190 800

19 O-ring 336 190 220

20 a. O-ring, M17 460 190 331 b. O-ring, M18 460 190 304

21 Dust pipe 97 855-51

22 Dust pipe with EFV 97 856-51

23 Blank plug 97 854-51

24 Burst disc 97 399-51 # SERvIcE KIT ORDERING NO.

A Service kit for 1 apparatus 460 190 686 Cylinder valve - Type II – 1 singular item of each of #5-7/9

B Service kit for 10 apparatus 460 190 687 Cylinder valve - Type II – 10 singular items of each of #5-7/9

11211

10

23

13

14a

14b

9

4

5678

16

15

24

23

20

21

22

Cylinder valveType II

41

7


• Weight, 13.8 kg 97 520-51 For 326.7 Incl. 1 pcs of #3 & #5, 2 pcs of #2 & #4

• Weight, 9.3 kg 97 520-53 For 323.4 Incl. 1 pcs of #3 & #5, 2 pcs of #2 & #4

1 Weight, lower, 2.1 kg 97 522-52

2 Weight, lower, 3.3 kg 97 522-51

3 Weight, upper, 7.2 kg 97 521-51

4 Screw 97 528-51

5 Hair Pin Assy. 460 190 570

6 Weight substitute 97 869-51

7 Weight, lower, 1.1 kg 97 522-53

8 Weight substitute 97 869-52

wEIghT, ComPoSITE

3 2 1

4

4

6

5

78

Date post:	13-May-2020
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

336100528E01 SPARE PARTS LIST - arwell.fi MK II... · MANUAL in regard to procedure and handling of...

Documents