INFO 33.8 Development Methods
Specification
1. Before any development of a new system what is carried out to establish whether it is worth while?
2. What is the purpose of a feasibility study?3. What do we mean by ICT systems, what is an ICT System?4. Why are new systems developed?5. What method is most often followed in order to develop an ICT System?6. What is the purpose of the systems Development Life Cycle?7. What is the occupation of the person required to initiate the SDLC?8. What are the 6 main stages of the Systems Development Life Cycle?9. How does the waterfall model of the System Development Life Cycle
differ from the original concept?10. What must be produced at the end of each stage of the life cycle?11. What needs to be established in the analysis phase?12. What methods can be used in order to analyse the current situation?13. What deliverables should be signed off at this stage (the analysis
stage)?14. ----NOTE----
To consolidate you should be able to answer these questions…
15. What needs to be included in the design phase?16. What deliverables should be signed off at this stage (the design stage)?17. What two ways are there to construct an ICT solution?18. What deliverables should be signed off at this stage (the constructing stage)?19. There are 6 types of testing that can be carried out on a system. What are these 6
different tests and briefly explain each.b. What is the difference between white-box and black-box testing? (give examples of each)
20. What deliverables should be signed off at this stage (the testing stage)?21. What should be considered during the installation and conversion stage?22. What deliverables should be signed off at this stage (the installation stage)?23. What 3 types of maintenance are carried out during the review and maintenance
stage?24. If something is done systematically, what does this mean?25. Formal projects must be managed systematically, large tasks should be broken down
into smaller tasks. For each of these smaller tasks what should be considered?26. When project planning what plans need to be drawn up?27. What is Project Management Software and what does it do?28. The development of a project can be categorised into two different methods, what
are they?29. Describe the differences between the two types of methodologies
To consolidate you should be able to answer these questions…
30. What do we mean by prototyping and how can this be an effective development methodology?
31. Explain the Extreme Programming (XP) Methodology
32. Explain the Scrum Methodology33. Explain the Crystal Methodology34. Explain the Rapid Application Development
(RAD) Methodology35. Explain the Dynamic Systems Development
(DSDM) Methodology
To consolidate you should be able to answer these questions…
A feasibility study
7.1 Before any development of a new system what is carried out to establish whether it is worth while?
It’s purpose is to judge whether to go ahead and develop the system
7.2 What is the purpose of a feasibility study?
Systems where the output goes directly to a human or into another ICT system
Their purpose is to
‘get an output and reduce waste in the process’Mr S. Skiff 2011
In other words their purpose is to make a particular ‘process’ within an organization more efficient. They deal with the input and process of data in order to produce information.
E.g. A data processing system that handles payroll
Components of ICT systems:◦ People◦ Data◦ Procedures◦ Software◦ Hardware◦ Information
7.3 What do we mean by ICT Systems, what is an ICT System?
Current one is out of date Technology has moved on Competitors have developed new systems The organisation has grown A new part of the company is established
that requires IT support The company wants to improve the quality
of a repetitive task
7.4 Why are new systems developed?
The Systems Development Life Cycle
7.5 What method is most often followed in order to develop an ICT System?
It is a method / model which aims to maximise the chances of a successful project
7.6 What is the purpose of the Systems Development Life Cycle?
System Analyst
7.7 What is the occupation of the person required to initiate the SDLC?
1. Analysis2. Design3. Constructing the solution4. Testing5. Installing and conversion6. Review and maintenance
7.8 What are the 6 main stages of the Systems Development Life Cycle?
7.9 How does the waterfall model of the System Development Life Cycle differ from the original concept?
Installation & Conversion
Review & Maintenance
Constructing the solution
Analysis
Design
Testing
Analysis
Design
Constructing the solution
Testing
Installation & Conversion
Review & Maintenance
Original Waterfall
The waterfall effect suggests that each stage is not finished off tidily before moving to the next.
There is overlap, e.g. designs may need to be altered if there are difficulties in the construction of the solution
Agreed Deliverables
These should be signed off by the client together with approval to proceed to the next stage.
7.10 What must be produced at the end of each stage of the life cycle?
What is the problem you intend to solve?
What does the existing system do?
What are the strengths and weaknesses of the existing system?
What is required of the new system? (Client/User requirements)
Who will be using the new system and if necessary who will be viewing the final product? (End Users and Audience)
Are there any constraints that may be placed on the new solution, e.g. legal requirements?
7.11 What needs to be established in the analysis phase?
Interviews at all levels Questionnaires/Surveys Analysis of existing paper work Observation of users of the current system
7.12 What methods can be used in order to analyse the current situation?
User Requirements List of tasks and subtasks that need to be
completed A Gantt Chart to show scheduled timings An assessment of user skills Hardware and Software requirements and
limitations Performance indicators of evaluation criteria
matching the client/users requirements An outline of the proposed method of solution
7.13 What deliverables should be signed off at this stage (the analysis stage)?
The analysis phase describes WHAT the project is going to do
The design phase explains HOW it is going to do it
7.14 NOTE
Justification of the software and tools you will use
Data capture and validation methods Designs for the user interface Processing to be carried out Outputs to be produced How the solution will be tested
7.15 What needs to be included in the design phase?
Details of file definitions, data structures and processes
Design of outputs A test strategy and plan
7.16 What deliverables should be signed off at this stage (the design stage)?
Customising a package◦ Using a generic or special purpose package and simply customising
it◦ May require compromises (not able to fully customise)◦ Less risky◦ More help and support available
Writing Code◦ This is when you build the solution from scratch◦ More flexible◦ Likely to take longer◦ Likely chance of errors
Documentation of construction is essential for both
7.17 What two ways are there to construct an ICT solution?
A working system Documentation of the solution Draft version of the user guide
7.18 What deliverables should be signed off at this stage (the constructing stage)?
Module/Unit testing◦ Testing individual sections of the software◦ Written by the programmer◦ White box testing – tester has access to internal data and algorithms
Integration Testing◦ Modules are combined and debugged
Functional Testing◦ Tests the operation of the system◦ Written from a users perspective◦ Black Box Testing – checks a given input produces the correct output
Systems Testing◦ Tests the complete system in preparation for user testing◦ Tests transactions are processed correctly from beginning to end
User Testing◦ Actual end users will test the system and offer comments◦ Final stage of testing◦ Testing user documentation is important at this stage◦ Should result in acceptance by the client and sign off to be installed
Operational Testing◦ Conducted in the environment or simulated version of the environment
7.19 There are 6 types of testing that can be carried out on a system. What are these 6 different tests and briefly explain each.
White-box testing◦ Concentrates on HOW the programs carry out
what is expected
Black-box testing◦ Concentrates on what the software should DO
rather than how it is done
17.19b What is the difference between white-box and black-box testing? (give examples of each)
Test data and results Modified user guide Client approval to install
7.20 What deliverables should be signed off at this stage (the testing stage)?
The type of changeover (discussed in unit 3.10 Introducing large ICT systems into organisations)
Direct – Company literally switches off the old system and switches on the new one.
Parallel – The company runs both the old and new system in parallel for a time. Once they are sure it is working properly and staff are ready they will do a complete change over.
Phased – Old system is still active but parts of the new system are used e.g. The front end input screens are used but run the old systems back end.
Pilot – complete new system is installed in a small number of departments / branches. They use the system and feedback to the analyst.
Legacy systems
Training
7.21 What should be considered during the installation and conversion stage?
Fully functional solution Full documentation
◦ User guides◦ Technical documentation
7.22 What deliverables should be signed off at this stage (the installation stage)?
Corrective maintenance◦ Putting right any reported errors once the system
is operational
Adaptive maintenance◦ Altering the system to meet new organisation,
legislation or security requirements
Perfective maintenance◦ Where any inefficiencies are tweaked i.e. make
the system even better
7.23 What 3 types of maintenance are carried out during the review and maintenance stage?
Means there is a system – carried out in an organised and logical manner
7.24 If something is done systematically, what does this mean?
A defined timescale A approved budget Resources e.g. staff,equipment
7.25 Formal projects must be managed systematically, large tasks should be broken down into smaller tasks. For each of these smaller tasks what should be considered?
Resource Plan◦ Lists the human resources required e.g. staff skills and roles◦ Lists the equipment resources required e.g. specifications, quantities
Financial Plan◦ Allocates financial budget to each stage
Quality Plan◦ Lists clear quality requirements for each deliverable
Risk Plan◦ Foreseeable risks, what can be done to reduce them and how they will be dealt with if they
arise
Acceptance Plan◦ Criteria and schedule for client acceptance reviews
Communications Plan◦ What method will be used and how often communication between teams will take place
Procurement Plan◦ Good and services obtained externally and processes by which suppliers will be chosen
7.26 When project planning what plans need to be drawn up?
It is software than can be used to manage a project
It allows a project to be broken down into sections, each of which can be planned and then linked to the other sections to produce an overall plan
7.27 What is Project Management Software and what does it do?
Linear and iterative
7.28 The development of a project can be categorised into two different methods, what are they?
Linear methodologies such as the waterfall model are very sequential, they tend to be easy to manage but are inflexible and less able to respond creatively to problems and opportunities that present themselves along the way.
Iterative methodologies such as the scrum method are very agile. Iterative methodologies loop around the stages of the development until the developers and/or client are happy with the solution at that point and can move on to the next stage.
7.29 Describe the differences between the two types of methodologies
It relies on a process of continuous refinement based on experiences at each stage.
Small stages of the solution are built and refined with as much user involvement as possible.
Time and budget is difficult to control
7.30 What do we mean by prototyping and how can this be an effective development methodology?
Based on user stories written by clients as things that the system needs to do for them.
Each of the stories is about three sentences long
Acceptance tests are then created to verify the user story has been correctly implemented
When time comes to implement the ‘story’ developers will receive a detailed description of the requirements
They then work in iterations (of about 3 weeks) until the solution is complete
7.31 Explain the Extreme Programming (XP) Methodology
People in the team fulfil a distinct task that come together to form an effective whole
Short daily meetings are used to address immediate problems and keep tabs on progress.
Sprints (of around 4 weeks) are then carried to work on development
At the end of each sprint the teams come together and present their solutions
7.32 Explain the Scrum Methodology
Focuses on people and teams rather than processes
7.33 Explain the Crystal Methodology
Uses:◦ computerised development tools◦ prototyping, to improve development times and quality at low costs
Uses tools like:◦ GUI builders◦ Computer Aided Software Engineering (CASE) tools◦ Database Management Systems
Aim of this method is to meet the business needs quickly and at acceptable costs rather than most technically sound solution
RAD proposes that the following are effective:◦ Using workshops or focus groups to gather requirements◦ Prototyping and user testing of designs◦ Re-using software components◦ Following a schedule◦ Informal communication
7.34 Explain the Rapid Application Development (RAD) Methodology
An extension of RAD based on:◦ User involvement produces accurate decisions◦ Project team is empowered to make decisions◦ Frequent delivery of products for review◦ Main criteria is delivering a system that addresses
the crucial business needs rather than perfect system
◦ Development is iterative and driven by users’ feedback
◦ Testing is carried out throughout◦ Communication and cooperation must be efficient
and effective
7.35 Explain the Dynamic Systems Development (DSDM) Methodology
Past Paper Questions
Past Paper Questions
Past Paper Questions
Past Paper Questions