4b./7. Alfra Magneetboormachines (engels)

Quality Tools and Machines

21Part B

PUNCHINGDRILLINGCUTTINGDEBURRING

3. revised

Edition

BNaturally also on the Internet – www.alfra.de

Made in Germany

B/2

BNaturally also on the Internet – www.alfra.de

Index Drilling – Punching – Cutting – Deburring

Cutters, TCT, ALCutters, Rail TCTPage B/51 - B/52

Cutters, TCT, suitablefor FEIN + HitachiPage B/53

RotaSpeed®

Metal Cutting SawRotaCut®

Mobile Band Saw MachinePage B/54 - B/67

Hydraulic Punching Units, Single ActingPage B/68 - B/72

Hydraulic PumpsPage B/73 + B/74 + B/75

Hydraulic Punching Units, Double ActingPage B/74

Metal Core Drilling MachinesPage B/2 - B/29

Machine DimensioningPage B/30 - B/31

Accessories - ArborsPage B/32 - B/33

Accessories Countersinking/CoolantPage B/34

Accessories – TappingPage B/35

Accessories - Chip Removers/Pipe Retainers/Vacuum PlatesPage B/36 - B/37

Deburring Devices/Bevel Edge Milling MachinesPage B/79 - B/101

MillsPage B/94 - B/95

Deburring Machine, SKS-15 AutoPage B/100 - B/101

HSS-Bi-Metal- and TCT-Hole SawsPage B/102 - B/119

Multi-Step DrillsPrecision Conical One-Lip BitsPage B/120 - B/124

Astroflex® Sabre Saw BladesSabre Saw and Jigsaw BladesPage B/125 - B/127

Cutters, HSS BASICPage B/38 - B/41

Cutters, HSS-Co-EcoPage B/42 - B/43

Cutters, HSS-Co RQXPage B/44 - B/45

Cutters, ASP-30 RailPage B/46

Cutters, HSS-Co Eco, suitablefor FEIN + HitachiPage B/47

Cutters, TCT, WeldonPage B/50 - B/51

B/3

B/4

Powerful Motors with high torques and a range from 900 to 2.500W, ergonomic design, perfect technology.

Oilbath Gear Box

Improved magnetic adhesion due to 3 instead of 2 coils.

Soft-Touch Grip Low-vibration – with optimum secure grip (even

with oil-coated gloves).

Pressed-in brass rings for an improved protection of the magnet coils.

Continuously adjustable motor on the slide for a maximum stroke enlargement, when using twist drills, drill chucks and tapping attachments.

Rota-Quick® – quick change arbor – problem-free change of cutter. The decisive advantage compared with other quick change arbors: every usual cutter with Weldon-shank fits.

Durable keyboard with flat cable. Panel slopingly arranged, directly in sight of the user. To feel for the ON/OFF-switch has come to an end. Easy reachability of keyboard, even in narrow U-beams and H-beams.

Newly designed gear-housing with integrated motor support. With built-in height adjustment by means of clamping jaws – there is no better fixing device.

Trouble with ordinary dovetail or pillar guides? Solid brass guide rails guarantee an optimum slide guidance.

The heart of our Magnetic Drilling Machines: Robust electronic switch units, interchangeable between Model 32 – 40 – 60 – 100 and between

40 RL-E – 60 RL-E – 100 RL-E

Manufacturer’s Competence

30 years ox experience

B/5

BALFRA Metal Core Drilling Machines – RQ Series OverviewMade in Germany by ALFRA

pageB/10 pageB/12 pageB/14 pageB/16 pageB/18 pageB/20 pageB/22 pageB/24

Type Rotabest®32RQ Rotabest®40RQ Rotabest®40RL-E Rotabest®60 Rotabest®60RL-E Rotabest®100 Rotabest®100RL-E Rotabest®V32

Prod.-No 18600 18610 18611 18625 18626 18635 18632 18710

Input 1.100Watt 1.200Watt 1.200Watt 1.800Watt 1.800Watt 2.500Watt 1.800Watt 900Watt

Speed 450 250/450 100-250 110/175/ 50-110/75-175165/255/365/570

50-110/75-175/ 450rpm 180-450 245/385 105-245/165-385 105-245/165-385

FullWaveElectronics/ – – ■ – ■ ■ ■ –Thermalprotection

Oil-bathgearbox – ■ ■ ■ ■ ■ ■ –

MotorOverload – – ■ – ■ ■ ■ –

Protection/Over-VoltageSwitch-Off

Right-/LeftRotation – – ■ – ■ – ■ –

FrictionClutch – – – ■ ■ ■ ■ –

Max.ØofCutter 32mm 40mm 40mm 60mm 60mm 100mm 100mm 32mm

Max.CuttingDepth 50mm 50mm 50mm 50mm 50mm 50mm 50mm 25mm

Tapping – M20 M20 M30 M30 M30 M30 –

Countersinking ■ ■ ■ ■ ■ ■ ■ ■

TwistDrillsØmax. 13mm 13mm 16mm 32mm 32mm 32mm 32mm –

Arbor 19mmWeldon 19mmWeldon MT2 MT3 MT3 MT3 MT3 19mmWeldon Rota-Quick® Rota-Quick® quickchangearbor quickchangearbor

Magnetic 11.000N 16.000N 16.000N 20.000N 20.000N 20.000N 20.000N 16.000N

Adhesion rigid rigid rigid 30°swiveling 30°swiveling 30°swiveling 30°swiveling rigid

Min.Material 6mm 6mm 6mm 10mm 10mm 10mm 10mm 6mm

Thickness

SizeofMagnetFoot 70x180mm 80x230mm 80x230mm 80x230mm 80x230mm 80x230mm 80x230mm 95x200mm

Stroke 160mm 170mm 170mm 190mm 190mm 245mm 245mm 45mm

Motoradjustable 85mm 100mm 100mm 60mm 60mm 116mm 116mm –inheight

Weight 11.8kg 16kg 16kg 22kg 22kg 29kg 28kg 12.5kg

B/6

BALFRA Metal Core Drilling Machines – RQ Series OverviewMade in Germany by ALFRA


Type Rotabest®32RQ Rotabest®40RQ Rotabest®40RL-E Rotabest®60 Rotabest®60RL-E Rotabest®100 Rotabest®100RL-E Rotabest®V32

Prod.-No 18600 18610 18611 18625 18626 18635 18632 18710

Input 1.100Watt 1.200Watt 1.200Watt 1.800Watt 1.800Watt 2.500Watt 1.800Watt 900Watt

Speed 450 250/450 100-250 110/175/ 50-110/75-175165/255/365/570

50-110/75-175/ 450rpm 180-450 245/385 105-245/165-385 105-245/165-385

FullWaveElectronics/ – – ■ – ■ ■ ■ –Thermalprotection

Oil-bathgearbox – ■ ■ ■ ■ ■ ■ –

MotorOverload – – ■ – ■ ■ ■ –


Right-/LeftRotation – – ■ – ■ – ■ –

FrictionClutch – – – ■ ■ ■ ■ –



Tapping – M20 M20 M30 M30 M30 M30 –


TwistDrillsØmax. 13mm 13mm 16mm 32mm 32mm 32mm 32mm –

Arbor 19mmWeldon 19mmWeldon MT2 MT3 MT3 MT3 MT3 19mmWeldon Rota-Quick® Rota-Quick® quickchangearbor quickchangearbor

Magnetic 11.000N 16.000N 16.000N 20.000N 20.000N 20.000N 20.000N 16.000N

Adhesion rigid rigid rigid 30°swiveling 30°swiveling 30°swiveling 30°swiveling rigid


Thickness



Motoradjustable 85mm 100mm 100mm 60mm 60mm 116mm 116mm –inheight

Weight 11.8kg 16kg 16kg 22kg 22kg 29kg 28kg 12.5kg

B/7

BALFRA Metal Core Drilling Machines – Eco Series OverviewMade in Germany by ALFRA


Type Piccolo32/50WD Piccolo32/50WD Mini38/50WD Mini38/50WD Mini40/2(HS*)WD Mini40/2(HS*)WD Junior75/4 Junior75/4

Prod.-No 18500 18501 18556 18557 18510;(18512*) 18511(18513*) 18520 18521

Input 1.100Watt 1.100Watt 1.100Watt 1.100Watt 1.200Watt 1.200Watt 1.800Watt 1.800Watt

Speed 450 450 450 450 250/450;(430/780rpm*) 250/450;(430/780rpm*) 110/175/245/385 110/175/245/385rpm

FullWaveElectronics/ – – – – – – – –Thermalprotection

Oil-bathgearbox – – – – ■ ■ ■ ■

MotorOverload – – – – – – – –


Right-/LeftRotation – – – – – – – –

FrictionClutch – – – – – – ■ ■



Tapping – – – – M12 M12 M30 M30


TwistDrillsØmax. 13mm 13mm 13mm 13mm 13mm 13mm 32mm 32mm

Arbor 19mmWeldon 19mmWeldon 19mmWeldon 19mmWeldon 19mmWeldon 19mmWeldon MT3 MT3

MagneticAdhesion 8.000N 8.000N 12.000N 12.000N 12.000N 12.000N 18.000N 18.000N rigid rigid rigid rigid rigid rigid 330°swiveling 330°swiveling


Thickness



Motoradjustable 86mm 86mm 98mm 98mm 120mm 120mm 130mm 130mminheight

Weight 10.4kg 10.4kg 15.5kg 15.5kg 15kg 15kg 25kg 25kg

Foil keypadSwitch keypad


B/8

Schalttastatur

BALFRA Metal Core Drilling Machines – Eco Series OverviewMade in Germany by ALFRA

Switch keypad

*HS(HIGHSPEED)


Type Piccolo32/50WD Piccolo32/50WD Mini38/50WD Mini38/50WD Mini40/2(HS*)WD Mini40/2(HS*)WD Junior75/4 Junior75/4

Prod.-No 18500 18501 18556 18557 18510;(18512*) 18511(18513*) 18520 18521

Input 1.100Watt 1.100Watt 1.100Watt 1.100Watt 1.200Watt 1.200Watt 1.800Watt 1.800Watt

Speed 450 450 450 450 250/450;(430/780rpm*) 250/450;(430/780rpm*) 110/175/245/385 110/175/245/385rpm

FullWaveElectronics/ – – – – – – – –Thermalprotection

Oil-bathgearbox – – – – ■ ■ ■ ■

MotorOverload – – – – – – – –


Right-/LeftRotation – – – – – – – –

FrictionClutch – – – – – – ■ ■



Tapping – – – – M12 M12 M30 M30


TwistDrillsØmax. 13mm 13mm 13mm 13mm 13mm 13mm 32mm 32mm

Arbor 19mmWeldon 19mmWeldon 19mmWeldon 19mmWeldon 19mmWeldon 19mmWeldon MT3 MT3

MagneticAdhesion 8.000N 8.000N 12.000N 12.000N 12.000N 12.000N 18.000N 18.000N rigid rigid rigid rigid rigid rigid 330°swiveling 330°swiveling


Thickness



Motoradjustable 86mm 86mm 98mm 98mm 120mm 120mm 130mm 130mminheight

Weight 10.4kg 10.4kg 15.5kg 15.5kg 15kg 15kg 25kg 25kg

NEW NEW


Foil keypad

B/9

B Metal Core Drilling with

ALFRA ROTABEST ®

32RQ

B/10

BMetal Core Drilling Machine – ALFRA Rotabest® 32 RQ Made in Germany by ALFRA

Technicaldata:CoreDrill: Ø12.0-32.0mmCuttingDepth: 50.0mmTwistdrill: Ø1.0-13.0mmCountersinking: Ø10.0-40.0mmInput: 1.100W1-speedgearbox: 450rpmToolholder: 19.0mmRota-Quick® quickchangearborCoolantSupply: internal,automaticallyVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 11.000NMagnetfoot: 70x180mm(rigid)HeightAdjustable: 85mmStroke: 160mmWeight: 11.8kg

ScopeofSupply:• MetalCoreDrillingMachine32RQ• TransportCase• CoolantUnit• DrillingSpray• DrillchuckØ1-13mm• Chipremover• Safetybelt• HSS-CoCutterØ18mm• EjectorPin• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set® 32 RQ 230 Volt 18600ALFRA Rotabest® Complete Set® 32 RQ 110 Volt 18600.110

Trouble with ordinary dovetail or pillar guides? Solid brass guide railsguarantee an optimum slide guidance.

Rota-Quick® quick change arbor – easy cutter change. The decisive advantage over other quick-change systems: It takes all standard cutters with Weldon shanks.

NEW – durable foil keypad with flat cable, control panel slanted in direct view of operator. An end to groping for the on/off switch. Keypad easily accessible even in narrow U-beams and H-beams.


Pressed in brass rings for an im-proved protection of the magnet coils.

The jackscrews for the slide guidance are no longer on the front side, but on the back side of the panel. No danger of injuries. Fixing device to fix the slide on each height. For comfortable tool-change, ideal for the machine- transport.

The heart of our Magnetic Drilling Machines: Robust electronic switch units, interchangeable with all types of the new Generation. Easy to approach for a quick service.

Motor adjustable in height on the slide for maximum stroke enlarge-ment when using twist drills and drill chucks.

Left-handed? Reversible handles for right- and left-handed operation.Allen key misplaced? Tool pouch for the Allen key for the motor height adjustment fixing screws.Ruler to check drilling depth.

B/11


ALFRA ROTABEST ®

40RQ

B/12

BMetal Core Drilling Machine – ALFRA Rotabest® 40 RQ Made in Germany by ALFRA

Technicaldata:CoreDrill: Ø12.0-40.0mmCuttingDepth: 50.0mmTwistdrill: Ø1.0-13.0mmCountersinking: Ø10.0-40.0mmTapping: withTappingAttachment:M3-M20Input: 1.200W2-speedgearbox: 250/450rpmToolholder: 19.0mmRota-Quick® quickchangearborCoolantSupply: internal,automaticallyVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 16000NMagnetfoot: 80x230mm(rigid)HeightAdjustable: 100mmStoke: 170mmWeight: 16.0kg

ScopeofSupply:• MetalCoreDrillingMachine40RQ• TransportCase• CoolantUnit• DrillingSpray• DrillchuckØ1-13mm• Chipremover• Safetybelt• HSS-CoCutterØ22mm• EjectorPin• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set 40 RQ 230 Volt 18610ALFRA Rotabest® Complete Set 40 RQ 110 Volt 18610.110


Rota-Quick® quick change arbor – easy cutter change. The decisive advantage over other quick-change systems: It takes all standard cutters with Weldon shanks.




The jackscrews for the slide guidance are no longer on the front side, but on the back side of the panel. No danger of injuries. Fixing device to fix the slide on each height. For comfortable tool-change, ideal for the machine- transport.




B/13


ALFRA ROTABEST ®

40RL-E■ Thecharacteristicfeatureofthisseriesistheright-/left rotation(e.g.forthreadingwithouttappingattachment).

■ Usedwiththreadingquick-changechuckwiththreadedin-serts.

■ Diverseapplications:Drillingwithtwistorcoredrills,thread-ing,countersinkingandrubbing.

■ Withcontrolelectronicsforoptimalspeeds.

■ Robust–precise–versatile.

Tappingattachmentisnotincludedinscopeofsupply.B/14

BMetal Core Drilling Machine – ALFRA Rotabest® 40 RL-EMade in Germany by ALFRA

Technicaldata:CoreDrill: Ø12.0-40.0mmCuttingDepth: 50.0mmTwistDrill: Ø1.0upto16.0mm withMT2quick-clampdrillchuck uptoØ20.0mm withMT2DIN345directinsertionTapping: withTapCollets:M3-M14 withTappingAttachment:M3-M20Countersinking: Ø40.0mmMotor:Input: 1.200W2-speedgear: right/left1.speed 100-250rpm2.speed 180-450rpmArbor: MT2CoolantSupply: viaToolHolderFullWaveElectronics: serialThermalprotection: serialTorqueCutoff: serialHeightAdjustable: 100mmStoke: 170mmVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 16000NMagnetfoot: 80x230mm(rigid)Weight: 16.0kg

ScopeofSupply:• MetalCoreDrillingMachine40RL-E• TransportCase• CoolantUnit• DrillingSpray• Quick-clampdrillchuck1to16mm,MT2• Chipremover• Safetybelt• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set 40 RL-E 230 Volt 18611ALFRA Rotabest® Complete Set 40 RL-E 110 Volt 18611.110

NEW – durable foil keypad with flat cable, control panel slanted in direct view of operator. An end to groping for the on/off switch. Keypad easily accessible even in narrow U-beams and H-beams.Plus: motor control for right-/left rotation.

Especially well-suited to problem-solving and fast threading.







Tappingattachmentisnotincludedinscopeofsupply. B/15

BB Metal Core Drilling with

ALFRA ROTABEST ®

60

Arborisnotincludedinscopeofsupply.B/16

BBMetal Core Drilling Machine – ALFRA Rotabest® 60Made in Germany by ALFRA

Technicaldata:CoreDrill: Ø12.0-60.0mmCuttingdepth: 50.0/110.0mmTwistdrill: Ø1.0-16.0mmwithdrillchuck uptoØ32.0withMorseTaperCountersinking: Ø10.0-55.0mmTapping: uptoM30withTappingAttachmentInput: 1.800W4-speedgearbox: 110/175/245/385rpmArbor: MT3Voltage: 230Voltor110Volt(50-60Hz)Magneticadhesion: 20000NMagnetFoot: 80x230mm,30°adjustableright/left 10mmback/forwardsHeightAdjustable: 60mmStroke: 190mmWeight: 22.0kg

ScopeofSupply:• MetalCoreDrillingMachine60• TransportCase• CoolantUnit• Chipremover• Safetybelt• DrillingSpray• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set 60 230 Volt 18625ALFRA Rotabest® Complete Set 60 110 Volt 18625.110





Adjustable Magnet Foot for better positioning. 10 mm back/forwards. 15° right/left .




Arborisnotincludedinscopeofsupply. B/17


ALFRA ROTABEST ®

60RL-E■Thismachinehasthesamefeaturesasmodel40RL-E

fordrilling–threading(M3toM30)–countersinkinguptoØ55mmorrubbing

■ Evenmorepowerfulandrobustwiththegreatestma-gneticadhesionforyoursafety.

■ Themagnetfootcanbepivote30°rightandleftandcanbeadjusted10mmforwardsandbackwards.

■ Thismeansthegreatestpossibleflexibilityfor positioning: -settingthemachine -securingwithmagnet -andthenprecisepositioning.

■ Motorheightadjustableforgreatestpossiblestroke,especiallyforusewithMTtwistdrills,tapcolletsandextra-longcutters.

Tappingattachmentisnotincludedinscopeofsupply.B/18


Technicaldata:CoreDrill: Ø12.0-60.0mmCutter,extralong110mm: Ø20.0-50.0mmCuttingdepth: 50.0/110.0mmTwistdrill: Ø1.0-16.0mmwithdrillchuck uptoØ32mmwithMorseTaperDIN345Tapping: withTapCollets:uptoM30 withTappingAttachment:uptoM30Countersinking: Ø 10 - 55.0 mmMotor:Input: 1.800W4-speedgearbox: right/left 1.speed 50-110rpm 2.speed 75-175rpm 3.speed 105-245rpm 4.speed 165-385rpmToolholder: MT3CoolantSupply: viaToolHolderFullWaveElectronics: serialThermalprotection: serialTorqueCutoff: serialVoltage: 230Voltor110Volt(50-60Hz)Magneticadhesion: 20000NMagnetFoot: 80x230mm,30°adjustableright/ left,10mmback/forwardsHeightAdjustable: 60mmStroke: 190mmWeight: 22.0kg

ScopeofSupply:• MetalCoreDrillingMachine60RL-E• TransportCase• CoolantUnit• DrillingSpray• Quick-clampdrillchuck1to16mm,MT3• Chipremover• Safetybelt• Operationmanual












ALFRA ROTABEST ®

100


BMetal Core Drilling Machine – ALFRA Rotabest® 100Made in Germany by ALFRA

TechnicalData100:CoreDrill: Ø12.0-100.0mmCuttingDepth: 50.0mm/110mmTwistdrill: Ø1.0-16.0mmwithdrillchuck uptoØ32.0mmwithMorseTaperCountersinking: Ø10.0-55.0mmTapping: uptoM30withTappingAttachmentInput: 2.500W4-speedgearbox: 165/255/365/570rpmToolholder: MT3Voltage: 230Voltor110Volt(50-60Hz)Magneticadhesion: 20000NMagnetFoot: 80x230mm,30°adjustableright/left 10mmback/forwardsHeightAdjustable: 116mmStroke: 245mmWeight: 29.0kg

ScopeofSupply:• MetalCoreDrillingMachine100• TransportCase• CoolantUnit• Chipremover• Safetybelt• DrillingSpray• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set 100 2500 W 230 Volt 18635ALFRA Rotabest® Complete Set 100 2500 W 110 Volt 18635.110











ALFRA ROTABEST ®

100 RL-E



TechnicalData100RL-E:CoreDrill: Ø12.0-100.0mmCuttingDepth: 50.0mm/110mmTwistdrill: Ø1.0-16.0mmwithdrillchuck uptoØ32.0mmwithMorseTaperCountersinking: Ø10.0-55.0mmTapping: withTapCollets:uptoM30 withTappingAttachment:uptoM30Input: 1.800W4-speedgearbox: right/left 1.speed 50-110rpm 2.speed 75-175rpm 3.speed 105-245rpm 4.speed 165-385rpmToolholder: MT3Voltage: 230Voltor110Volt(50-60Hz)Magneticadhesion: 20000NMagnetFoot: 80x230mm,30°adjustableright/left 10mmback/forwardsStroke: 245mmWeight: 28.0kg

ScopeofSupply:• MetalCoreDrillingMachine100RL-E• TransportCase• CoolantUnit• Chipremover• Safetybelt• DrillingSpray• Quick-clampdrillchuck• Operationmanual











Tappingattachmentisnotincludedinscopeofsupply. B/23


ALFRA ROTABEST ®

V32

B/24

BAngular Metal Core Drilling Machine – ALFRA Rotabest® V32Made in Germany by ALFRA

■ Horizontalmetalcoredrillingmachineforthetightestconditions.Perfectforusewhereregularmetalcoredril-lingmachinescannotgoduetotheirheight.

■Applicationareas: Steelconstruction(inbetweengirderflanges),vehicle

construction(truckframes),bridgeconstruction,towerconstruction,tunnelconstruction,terselyeverywhere,whereit´snarrow...

■Thetotalheightisjust227mmandcanevenbereducedto185mmbyremovingthehandle.

■Thespurgearunitisdesignedforrobustuseandisfedusingaratchetleveler.

Reversibleforright-andleft-handedoperation.

■Anotheradvantage:thedesignoftheangledgearunitensurespermanentlubricationandpreventsdryrunning.

■Usedwiththeprovenmotorsand magnetfootcomponentsfromtheRotabest®series.

Technicaldata:CoreDrill: Ø12.0-32.0mmCuttingDepth: 25mmCountersinking: Ø10.0-32.0mm

Input: 900W1-speedgearbox: 450rpmToolHolder: 19mmWeldonCooling: internal,automaticallythroughthespindle thespindleVoltage: 230Voltor110Volt(50-60Hz)MagnetFoot: 95x200mm(rigid)Magnetadhesion: 16000NHeight: 227/185mmPowercord: 3.0mWeight: 12.5kg

ScopeofSupply:• AngularMetalCoreDrillingMachineV32• Coolantunitwithhoseandnipple• transportcase• AllenkeyforWeldonarbor• safetybelt• HSSCoCutterØ18mm,cuttingdepth25mm• Ejectorpin6.35x70mm(specificallyforRotabest®V32)• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set V32 230 Volt 18710ALFRA Rotabest® Complete Set V32 110 Volt 18710.110

Fed using ratchet leveler, reversible for right- and left-handed operation

Suitable for the tightestspaces, wherever it is tight.

Spur gear unit for robust application

Easy to use:Magnet on – Motor on/off

Good view from operator position to drill

Robust rack guides

B/25

BBMetal Core Drilling Machine – ALFRA Rotabest®

Made in Germany by ALFRA

Piccolo 32/50 Weldon

Prod.-No.18501

Weldon held directly in the motor spindle. No tool holder necessary.Ensures the highest concentricity.

Motor adjustable in height on the slide for maximum stroke enlarge-ment when using twist drills and drill chucks.Solid brass guide rails guarantee an optimum slide guidance.

Prod.-No.18500

Switch keypad

Foil keypadTechnicaldata:CoreDrill: Ø12.0-32.0mmCuttingDepth: 50.0mmTwistDrill: Ø1.0-13.0mmDIN338Countersinking: Ø10.0-40.0mmInput: 1.100W1-speedgearbox: 450rpmToolHolder: 19mmWeldonshankCoolantSupply: internal,automaticallyHeightAdjustable: 86mmStroke: 129mmVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 8.000NMagnetFoot: 70x160mMagnetFootAssembly: rigidWeight: 10.4kg

ScopeofSupply:• MetalCoreDrillingMachine Piccolo32/50Weldon• Plastictransportcase• Safetybelt• CoolantUnit• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set Piccolo 32/50 WD 230 Volt 18500ALFRA Rotabest® Complete Set Piccolo 32/50 WD 110 Volt 18500.110ALFRA Rotabest® Complete Set Piccolo 32/50 WD 230 Volt 18501ALFRA Rotabest® Complete Set Piccolo 32/50 WD 110 Volt 18501.110

B/26

BBMini 38/50 Weldon

Metal Core Drilling Machine – ALFRA Rotabest®



Motor adjustable in height on the slide for maximum stroke enlarge-ment when using twist drills and drill chucks.Solid brass guide rails guarantee an optimum slide guidance.

Prod.-No.18557

Prod.-No.18556

Switch keypad

Foil keypadTechnicaldata:CoreDrill: Ø12.0-38.0mmCuttingDepth: 50.0mmTwistDrill: Ø1.0-13.0mmDIN338Countersinking: Ø10.0-40.0mmInput: 1.100W1-speedgearbox: 450rpmToolHolder: 19mmWeldonshankCoolantSupply: internal,automaticallyHeightAdjustable: 98mmStroke: 141mmVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 12.000NMagnetFoot: 95x200mmMagnetFootAssembly: rigidWeight: 15.5kg

ScopeofSupply:• MetalCoreDrillingMachine Mini38/50Weldon• Plastictransportcase• Safetybelt• CoolantUnit• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set Mini 38/50 WD 230 Volt 18556ALFRA Rotabest® Complete Set Mini 38/50 WD 110 Volt 18556.110ALFRA Rotabest® Complete Set Mini 38/50 WD 230 Volt 18557ALFRA Rotabest® Complete Set Mini 38/50 WD 110 Volt 18557.110

B/27

BMetal Core Drilling Machine – ALFRA Rotabest®


Mini 40/2 WeldonMini 40/2 HS Weldon


Prod.-No.18511

Prod.-No.18513

Prod.-No.18510

Prod.-No.18512

Switch keypad

Type HS

Foil keypad

Type HS

Technicaldata:CoreDrill: Ø12.0-40.0mmCuttingDepth: 50.0mmTwistdrill: Ø1.0-13.0mmCountersinking: Ø10.0-40.0mmTapping: uptoM20withTappingAttachmentInput: 1.200W2-speedgearbox: 250/450rpm;430/780rpm(TypeHS)Arbor: 19mmWeldonDirectArborCoolantSupply: internal,automaticallyHeightAdjustable: 120mmStroke: 141mmVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 12.000NMagnetFoot: 95x200mmMagnetFootAssembly: rigidWeight: 15.0kg

ScopeofSupply:• MetalCoreDrillingMachine Rotabest®mini40/2• Plastictransportcase• Quick-clampdrillchuck• HSS-CoCutterØ22mm• EjectorPin• CoolantSprayALFRA4000• Coolantunit• Operationmanual Prod. No.

ALFRA Rotabest® Complete Set Mini 40/2 WD 230 Volt 18510ALFRA Rotabest® Complete Set Mini 40/2 WD 110 Volt 18510.110ALFRA Rotabest® Complete Set Mini 40/2 WD 230 Volt 18511ALFRA Rotabest® Complete Set Mini 40/2 WD 110 Volt 18511.110

Prod. No.ALFRA Rotabest® Complete Set Mini 40/2 HS WD 230 Volt 18512ALFRA Rotabest® Complete Set Mini 40/2 HS WD 110 Volt 18512.110ALFRA Rotabest® Complete Set Mini 40/2 HS WD 230 Volt 18513ALFRA Rotabest® Complete Set Mini 40/2 HS WD 110 Volt 18513.110

TypeHS(HIGHSPEED)WeldonisqualifiedfortheuseofTCTCutters.

NEW

NEW

B/28

BJunior 75/4

Metal Core Drilling Machine – ALFRA Rotabest®


Prod.-No.18521

Prod.-No.18520

Switch keypad

Foil keypadTechnicaldata:CoreDrill: Ø12.0-75.0mmCuttingDepth: 50.0mmTwistDrill: Ø32.0mmTap withtappingattachment:uptoM30Countersinking: Ø10.0-55.0mmInput: 1.800W4-speedgearbox: 110/175/245/385rpm.ToolHolder: MT3CoolantSupply: viaToolHolderHeightAdjustable: 130mmStroke: 235mmVoltage: 230Voltor110Volt(50-60Hz)Magnetadhesion: 18.000NMagnetFoot: 95x200mm,movable10mmbackandforth,

330°tobothsidesWeight: 25.0kg

ScopeofSupply:• MetalCoreDrillingMachine Rotabest®Junior75/4• Transportcase• Safetybelt• CoolantUnit• Operationmanual

Prod.-No.ALFRA Rotabest® Complete Set Junior 75/4 230 Volt 18520ALFRA Rotabest® Complete Set Junior 75/4 110 Volt 18520.110ALFRA Rotabest® Complete Set Junior 75/4 230 Volt 18521ALFRA Rotabest® Complete Set Junior 75/4 110 Volt 18521.110


B Machine Dimensions – ALFRA Rotabest®

32 RQ

60 + 60 RL-E 100 + 100 RL-E

Piccolo 32/50 WDV 32

40 RQ + 40 RL-E

B/30

B Machine Dimensions – ALFRA Rotabest®

Mini 38/50 WD

Junior 75/4

Mini 40/2 WD

B/31

BAccessories – Arbors

Prod.-No. 18008/18009

Prod.-No. 18003/18025

Prod.-No. 18025L

Prod.-No. 20230

Prod.-No. 18650 + 18651

Prod.-No. 18107

Prod.-No. 18001/18002

Prod.-No. 18023

Description Prod.-No. 32 RQ 40 RQ 60 100 40 RL-E 60 RL-E 100 RL-E Piccolo 32/50WD Mini 38/50WD Junior 75/4 Mini38/50WD

RQ

DrillchuckwithWeldonshankfortwistdrills 18107 ■ ■

Ø1-13mm

40RL-E

Quick-clampdrillchuckwithMorseTaper2fortwistdrills 18008 ■ ■ ■

Ø1-16mm With

ReducingSleeve

MT3/2

Quick-clampdrillChuckwithMorseTaper3fortwistdrillsᅠ 18009 ■ ■

Ø1-16mm

40RL-E

ToolHolderAMT-2–MorseTaper2forcoredrills 18003 ■ ■ ■

withWeldonshank With With

Ø12-60mm ReducingSleeveReducingSleeve

withautomaticinternalcooling– MT3/2 MT3/2

suitableforallmachineswithdrillspindleMT2

40RL-E

ToolHolderAMT-2MorseTaper2 18001 ■ ■ ■

withoutinternalfilmcooling With With

ReducingSleeveReducingSleeve

MT3/2 MT3/2

SleeveforTappingAttachmentMT 3/2 18023 ■ ■

ToolHolderAMT-3MorseTaper3 18002 ■ ■

withoutinternalfilmcooling

ToolHolderAMT-3–MorseTaper3forcoredrills 18025 ■ ■

withWeldonshankØ12-60mmwithoutinternalcooling–suitableforallmachineswithdrillspindleMT3

ToolHolderAMT-3–elongateddesign 18025L ■ ■

MorseTaper3forcoredrillswithWeldonshankØ12-50mm,CuttingDepth110mmwithautomaticinternalcooling–suitableforallmachineswithdrillspindleMT3

ToolHolderAL3-MorseTaper3 20230 ■ ■

forcuttersstrongconstructionØ51-100mm,withkeywaywithautomaticinternalcooling

40RL-E

QuickChangeToolHolderRota-Quick® 18650 ■ ■ ■

MorseTaper2 With With

withautomaticinternalcooling ReducingSleeveReducingSleeve

suitableforallmachineswithMT2arbor MT3/2 MT3/2

Applicationarea:max.Ø40mmcoredrills

QuickChangeToolHolderRota-Quick® 18651 ■ ■

Morsetaper3withautomaticinternalcooling–suitableforallmachineswithdrillspindleMT3Applicationarea:max.Ø40mmcoredrills

B/32

B

Prod.-No. 20201

Weldon

FEIN/HitachiM18 x 6P 1.5Internal Thread

Accessories – Adaptors

■ You use FEIN Magnet Drilling Machines?■You do not want to do withoutALFRA Rotabest® Cutters?■No Problem – we have the suitable adaptors

Prod.-No.

AdaptorwithinternalthreadM18x6P1.5 20201AdaptorfortheuseofRotabest®HSS-Co-EcoandHSS-CoRQXcuttersfromØ12to32.0mmandRotabestTCTcuttersfromØ14.0to32.0mmon:FEINCoreDrillingMachinesTypeKBM542

Adaptorwithexternalthread(inc.ejectorpin) 20202AdaptorforuseofFeincutterswithinternalthreadM18x6P1.5onMetalCoreDrillingMachineswithWeldonshank.

EjectorpintofitProd.-No.20202–separate 20203

Adaptor 20204AdaptorfortheuseofallcutterswithWeldonshankonFeinQuickINquickchangesystem.

ThisadaptorisunnecessarywhenusingourHSSEcocuttersinseriesProd.No.1909...and2009...

EjectorpinforHSScutter,Cuttingdepth25mm 1950500EjectorpinforHSScutter,Cuttingdepth50mm 1975500

ExtensionAdaptor 20206withWeldonshankandejectorpin.

Fortheuseofcutters25–35–50mmcuttingdepthincaseswhenthesurfaceofthematerialtobedrilledislowerthanthesupportsurfaceofthemachine.Thefirstejectorpinreleasesthesecondejectorpin,thecoolantflowsthroughtheholetothecutter.

TotallengthofAdaptor: 80mmDiameter: 30mmEjectorpin: 6.35x77mm,Prod.-No.1926500

Adaptorcpl.withejectorpin+Allenkey 20210AdaptorfortheuseofcutterswithFEINQuickINshankonMetalCoreDrillingMachineswithWeldontoolholder.

Replacementejectorpin(foradaptoronly)6.35x125mm 1936501

AdaptorforTCTHoleSaws,typeMBS 060WDonMetalCoreDrillingMachineswithWeldontoolholder(incl.ejectorpinProd.No.1950500

Prod.-No. 20202Weldon

FEIN/HitachiM18 x 6P 1.5Internal Thread

Prod.-No. 20204

Weldon FEIN-Quick IN

Prod.-No. 20206

Prod.-No. 20210

WeldonFEIN-Quick IN NEW

NEW

Prod. No. 060WD

B/33

BAccessories – Countersinking/CoolantFor all types

Prod.-No. 18104

Prod.-No. 18103

Prod.-No. 18533

Description Prod.-No. 32 RQ 40 RQ 60 100 40 RL-E 60 RL-E 100 RL-E Piccolo 32/50WD Mini 38/50WD Junior 75/4

HSSCountersinkandDeburrerwithWeldonshank 18533 ■ ■ ■ ■

Ø25mm With With ToolHolder ToolHolder

18003/18025 18003/18025

18650+18651 18650+18651


Ø30mm With With

ToolHolder ToolHolder

18003/18025 18003/18025

18650+18651 18650+18651


Ø40mm With With

ToolHolder ToolHolder

18003/18025 18003/18025

18650+18651 18650+18651

HSSCountersinkandDeburrerwithWeldonshank 18537 ■ ■

Ø 55 mm

Coolantunit,complete(seeillustration) 18104 ■ ■ ■ ■

Coolantunitwithhoseandnipple0.5litre 18103forRotabest®V32

ALFRABio2000 21010 ■ ■ ■ ■

CuttingandDrillingSpraySprayer405ml

ALFRA4000 21040 ■ ■ ■ ■

HighPerformanceCuttingOilSpraySprayer300ml

High-performancewaxpin 09011 ■ ■ ■ ■

Idealforverticalandoverheadcoredrillingsaspastestickstothecutter.

Prod.-No. 21010, 21040, 09011

B/34

BAccessories – TappingFor all types

Prod.-No. 18652 + 18653

Prod.-No. 18680

Prod.-No. 18682 (M6) Prod.-No. 18681

Prod.-No. 18681 – Assembly Note

Description Shank Prod.-No. 40 RQ 60 75/4 100 Mini 40/2TappingAttachmentM3-M12 MT2+RotaQuick® 18652 ■ ■ ■■

Scopeofsupply: with withwith

withRota-Quick®-shankandMT2,interchangeable, reducingsleevereducingsleevereducingsleeve

plasticcase,manualbook MT3/2MT3/2MT3/2

TappingAttachmentM10-M20 MT2+RotaQuick® 18653 ■ ■ ■■

Scopeofsupply: with withwith

withRota-Quick®-shankandMT2,interchangeable, reducingsleevereducingsleevereducingsleeveplasticcase,manualbook MT3/2MT3/2MT3/2

SleeveforTappingAttachment 18023

Tap Collets with Quick Change Inserts for Rotabest® RL-E,models with right/left rotation.

Tapping Set Size 1inwoodencase 18660consistingof:QuickChangeTappingAdaptorSize1MT 21pc.eachofTapColletSize1M3–M4–M5–M6–M8–M10–M12–M14

Tapping Set Size 2Inwoodencase 18680consistingof:QuickChangeTappingAdaptorSize2MT 31pc.eachofTapColletSize2M6–M8–M10–M12–M14–M16–M18–M20–M22

QuickChangeTappingAdaptor Size 1 MT2,separate 18661

QuickChangeTappingAdaptorSize 2MT3,separate 18681

Tap Collets with clutch

Shank-Ø Square Tap Size1 M3 3.5 2.7 DIN371 18662Size1 M4 4.5 3.4 DIN371 18663Size1 M5 6.0 4.9 DIN371 18664Size1 M6 6.0 4.9 DIN371 18678Size1 M8 8.0 6.2 DIN371 18665Size1 M10 10.0 8.0 DIN371 18666Size1 M12 9.0 7.0 DIN376 18667Size1 M14 11.0 9.0 DIN376 18668

Size2 M6 6.0 4.9 DIN371 18682Size2 M8 8.0 6.2 DIN371 18683Size2 M10 10.0 8.0 DIN371 18684Size2 M12 9.0 7.0 DIN376 18685Size2 M14 11.0 9.0 DIN376 18686Size2 M16 12.0 9.0 DIN376 18687Size2 M18 14.0 11.0 DIN376 18688Size2 M20 16.0 12.0 DIN376 18689Size2 M22 18.0 14.5 DIN376 18690

Prod.-No. 18023

B/35

BALFRA – Magnetic Chip Remover

Inastainlesssteelroundrod,youcanmoveamagnetbackandforth.Thestrongmagnetpicksupmetalchips–pullaknobandthechipsfalloff.Formorecleanlinessintheworkplace.

Prod.-No.ALFRAMagneticChipRemover,Length400mm 18654

Prod.-No. 18654

B/36

BAccessories – Mechanical Clamping Devices for PipesFor all types

Description Prod.-No.

"Whenallhellisletloose"onsite-orintheworkshop!Ourmechanicalattachmentforclampingpipeswithtensionchainsena-blestheuseofMagneticCoreDrillingMachinesonpipesfromØ80mm.Theadjustmentiscarriedoutbymeansofclampingjaws.ForpipesofvariousØ.

AttachmentforClampingPipeswith1tensionchainØ80-300mm 18019Baseplateformagnetfoot100x235mm,Weight7.5kg

AttachmentforClampingPipeswith2tensionchainsØ80-900mm 18020Baseplateformagnetfoot100x280mm,Weight12kg

AttachmentforClampingPipeswithtensionbeltØ80-900mm 18021Baseplateformagnetfoot100x235mm,Weight6.5kg

Tension range with double tension belt up to 2000 mm pipe Øon request Prod.-No. 18022

Description Prod.-No.

VacuumAttachmentVacubest 18150

Useonnon-magneticsurfacessuchasaluminium,copper,brass,stainlesssteel,plastics,structuredmaterials(e.g.bulborcheckerplate)Vacuumcapacity: 1.5m3/h-25l/min.Maxvacuum: 200mbar(abs)Overpressure: 300mbarDimensionofvacuumplate: 400x200mm

Scope of Supply:Pump(230V,50Hz),vacuumplate,vacuumhose3m

TIP:Pleaseexplainoperationrange(problems).Wearepleasedtoadvice.

Prod.-No. 18019

Prod.-No. 18020

Prod.-No. 18021

Accessories – Vacubest Vacuum AttachmentFor all types

Vacuum platePump

B/37

►►HSS-BASIC

►►HSS-CO-Eco

►►HSS-CO RQX coated

►►ASP-30 RAIL

B/38

Internal Bore for ejector pin+ coolant supply

Conical Grinding

Optimized tooth shapewith pre- and Post-cutter

Optimized wall thickness

usable cutting depth

Advantages of ALFRA ROTABEST® Cutters

Design Specially designed cutting geometry Advantages ■ Immediate centering ■ No running off center ■ Good concentricity ■ Suitable for NC and CNC machines

Design Optimum regular chip breakAdvantages ■ Smooth cutting ■ Excellent cutting capacity ■ Good chip production at each tooth ■ Regular chip flow

Design Minimum cross section of chip removing surfaceAdvantages ■ Easy cutting ■ Low torque ■ Minimum demand for energy

Design High tooth hardness due to optimum raw material and special heat treatmentAdvantages ■ Long tool life ■ Also suitable for material difficult to cut

Design High toughness of cutter, specially graduated hardnessAdvantages ■ Low risk of tool break, especially under rough working conditions

Industrial scale manufacturing by state-of-the-art CNC technology ■ Best reproducibility ■ Constant quality

B/39

BALFRA Rotabest® – HSS BASIC CuttersWith Weldon shank 19.0 mm

■ WithWeldonshank19.0mm, 2clampingsurfaces,1CountersinkingforRotaQuick®

■ Internalbore:6.35mm■ Steelquality:Specialhigh-capacityspeedsteel■ Groundsection:highperformancetoothingwithpre-andpostcutter

suitable for:ALFRA-Rotabest®(Weldon),ALFRA-RotaQuick®quickchangesystem,BDS,Bux,Ruko,Magnetor,Euroboor,Universal,Nitto,Jancy,Hougen,Magtron,Promac,RotabroachandaswellasforalltypesofmagneticdrillingmachineswithWeldonshank.

Ø in mm Prod.-No Prod.-No.Cutting Depth: 25 mm 50 mm

12.0 1907012025 190701205013.0 1907013025 190701305013.5 1907013525 190701355014.0 1907014025 190701405015.0 1907015025 190701505015.5 1907015525 190701555016.0 1907016025 190701605017.0 1907017025 190701705017.5 1907017525 190701755018.0 1907018025 190701805019.0 1907019025 190701905019.5 1907019525 190701955020.0 1907020025 190702005021.0 1907021025 190702105022.0 1907022025 190702205023.0 1907023025 190702305024.0 1907024025 190702405025.0 1907025025 190702505026.0 1907026025 190702605026.5 1907026525 190702655027.0 1907027025 190702705028.0 1907028025 190702805029.0 1907029025 190702905030.0 1907030025 190703005031.0 1907031025 190703105032.0 1907032025 190703205033.0 1907033025 190703305034.0 1907034025 190703405035.0 1907035025 190703505036.0 1907036025 190703605037.0 1907037025 190703705038.0 1907038025 190703805039.0 1907039025 190703905040.0 1907040025 190704005041.0 1907041025 190704105042.0 1907042025 190704205043.0 1907043025 190704305044.0 1907044025 190704405045.0 1907045025 190704505046.0 1907046025 190704605047.0 1907047025 190704705048.0 1907048025 190704805049.0 1907049025 190704905050.0 1907050025 190705005051.0 – 190705105052.0 1907052025 190705205053.0 – 190705305054.0 – 190705405055.0 1907055025 190705505056.0 – 190705605057.0 – 190705705058.0 – 190705805059.0 – 190705905060.0 1907060025 1907060050

EjectorPin 1926500 1950500Dimensionmm: 6.35x77 6.35x102

Countersinking for RotaQuick® Weldon

High performance toothing with pre- (1) and post (2) cutter

1

2

Dimensions in

inches available

upon request

Dimensions in inches available upon request.B/40

BALFRA Rotabest® – HSS BASIC Cutter SetsWith Weldon shank 19.0 mm

Prod.-No. 1907001050

■ Anassortmentofthemostpopularsizesofcuttersclearlypresentedinasolidplasticcase.

■ Absoluteprotectionoftheteetheveninroughapplicationsonthespotandintheworkshop.

■ WecanmanufactureyourindividualsetsfromØ12.0to30.0mmonrequest.

HSS BASIC Cutter Set Prod.-No.CuttingDepth25 mm 1907003025

6 pc. CutterSet:with1ea.ofØ 12.0 - 14.0 - 16.0 - 18.0 - 20.0 - 22.0 mminsolidplasticcaseincl.1ejectorpinProd.-No.1926500


10 pc. CutterSet:withØ 2 x 12.0 - 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 mminsolidplasticcaseincl.2ejectorpinsProd.-No.1926500




10 pc. CutterSet:withØ 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 - 1 x 24.0 - 1 x 26.0 mminsolidplasticcaseincl.2ejectorpinsProd.-No.1950500

Prod.-No. 1907003050

Prod.-No. 1907001025

Prod.-No. 1907003025

Dimensions in

inches available

upon request

B/41

B

1

2

ALFRA Rotabest® – HSS-Co-Eco CuttersWith Weldon shank 19.0 mm

■ WithWeldonshank19.0mm, 2clampingsurfaces,1CountersinkingforRotaQuick®

■ Internalbore:6.35mm■ Steelquality:Specialhigh-capacityspeedsteel,cobalt■ Groundsection:highperformancetoothingwithpre-andpostcutter

suitable for:ALFRA-Rotabest®(Weldon),ALFRA-RotaQuick®quickchangesystem,BDS,Bux,Ruko,Magnetor,Euroboor,Universal,Nitto,Jancy,Hougen,Magtron,Promac,RotabroachandaswellasforalltypesofmagneticdrillingmachineswithWeldonshank.

Ø in mm Prod.-No. Prod.-No. Prod.-No. Prod.-No.*Cutting depth 25 mm 35 mm 50 mm 110 mm

12.0 1901012025 1901012035 1901012050 –13.0 1901013025 1901013035 1901013050 –13.5 1901013525 – 1901013550 –14.0 1901014025 1901014035 1901014050 –15.0 1901015025 1901015035 1901015050 –15.5 1901015525 – 1901015550 –16.0 1901016025 1901016035 1901016050 –17.0 1901017025 1901017035 1901017050 –17.5 1901017525 – 1901017550 –18.0 1901018025 1901018035 1901018050 –19.0 1901019025 1901019035 1901019050 –19.5 1901019525 – 1901019550 -20.0 1901020025 1901020035 1901020050 190102011021.0 1901021025 1901021035 1901021050 –22.0 1901022025 1901022035 1901022050 190102211023.0 1901023025 1901023035 1901023050 –24.0 1901024025 1901024035 1901024050 190102411025.0 1901025025 1901025035 1901025050 190102511026.0 1901026025 1901026035 1901026050 190102611026.5 1901026525 – 1901026550 –27.0 1901027025 1901027035 1901027050 –28.0 1901028025 1901028035 1901028050 190102811029.0 1901029025 1901029035 1901029050 –30.0 1901030025 1901030035 1901030050 190103011031.0 1901031025 1901031035 1901031050 –32.0 1901032025 1901032035 1901032050 190103211033.0 1901033025 1901033035 1901033050 –34.0 1901034025 1901034035 1901034050 –35.0 1901035025 1901035035 1901035050 190103511036.0 1901036025 1901036035 1901036050 –37.0 1901037025 1901037035 1901037050 –38.0 1901038025 1901038035 1901038050 –39.0 1901039025 1901039035 1901039050 –40.0 1901040025 1901040035 1901040050 190104011041.0 1901041025 – 1901041050 –42.0 1901042025 – 1901042050 –43.0 1901043025 – 1901043050 –44.0 1901044025 – 1901044050 –45.0 1901045025 – 1901045050 190104511046.0 1901046025 – 1901046050 –47.0 1901047025 – 1901047050 –48.0 1901048025 – 1901048050 –49.0 1901049025 – 1901049050 –50.0 1901050025 – 1901050050 190105011051.0 – – 1901051050 –52.0 1901052025 – 1901052050 –53.0 – – 1901053050 –54.0 – – 1901054050 –55.0 1901055025 – 1901055050 –56.0 – – 1901056050 –57.0 – – 1901057050 –58.0 – – 1901058050 –59.0 – – 1901059050 –60.0 1901060025 – 1901060050 –

EjectorPins 1926500 1935500 1950500 2001502Dimensionsmm 6.35x77 6.35x87 6.35x102 8x160

*Attention:HSS-Co-EcoCutterswithcuttingdepth110mmcanonlybeusedwithToolHolderAMT2L(Prod.-No.18003L)orAMT3L(Prod.-No.18025L).



Dimensions in

inches available

upon request


BALFRA Rotabest® – HSS-Co-Eco Cutter SetsWith Weldon shank 19.0 mm

Prod.-No. 1901001050




HSS-Co-Eco Cutter Set Prod.-No.CuttingDepth 25 mm 1901003025

6 pc. CutterSet:with1ea.of Ø 12.0 - 14.0 - 16.0 - 18.0 - 20.0 - 22.0 mminsolidplasticcaseincl.1ejectorpinProd.-No.1926500

HSS-Co-Eco Cutter Set Prod.-No.CuttingDepth25 mm 1901001025

10 pc. CutterSet:withØ 2 x 12.0 - 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 mminsolidplasticcaseincl.2ejectorpinsProd.-No.1926500




10 pc. CutterSet:withØ 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 - 1 x 24.0 - 1 x 26.0 mminsolidplasticcaseincl.2ejectorpinsProd.-No.1950500

Prod.-No. 1901003050

Prod.-No. 1901001025

Prod.-No. 1901003025

Dimensions in

inches available

upon request

B/43

Dimensions in

inches available

upon request

BALFRA Rotabest® – HSS-Cobalt RQX Cutters, coatedWith Weldon shank 19.0 mm

■ WithWeldonshank19.0mm, 2clampingsurfaces,1Countersinkingfor

RotaQuick®

■ Internalbore:6.35mm■Steelquality:specialqualityhigh-capacity

speedsteelwithcobalt,coated■Groundsection:highperformancetoothing

withpre-andpostcutter

Ø in mm Cutting depth 25 mm Prod.-No.

12.0 190201202513.0 190201302514.0 190201402515.0 190201502516.0 190201602517.0 190201702518.0 190201802519.0 190201902520.0 190202002521.0 190202102522.0 190202202523.0 190202302524.0 190202402525.0 190202502526.0 190202602527.0 190202702528.0 190202802529.0 190202902530.0 190203002531.0 190203102532.0 190203202533.0 190203302534.0 190203402535.0 190203502536.0 190203602537.0 190203702538.0 190203802539.0 190203902540.0 190204002541.0 190204102542.0 190204202543.0 190204302544.0 190204402545.0 190204502546.0 190204602547.0 190204702548.0 190204802549.0 190204902550.0 190205002551.052.053.054.055.056.057.058.059.060.0Ejectorpin6.35x77mm 1926500

suitable for:ALFRA-Rotabest®(Weldon),ALFRA-RotaQuick®quickchangesystem,BDS,Bux,Ruko,Magne-tor,Euroboor,Universal,Nitto,Jancy,Hougen,Magtron,Promac,RotabroachandaswellasforalltypesofmagneticdrillingmachineswithWeldonshank.


12.0 190201205013.0 190201305014.0 190201405015.0 190201505016.0 190201605017.0 190201705018.0 190201805019.0 190201905020.0 190202005021.0 190202105022.0 190202205023.0 190202305024.0 190202405025.0 190202505026.0 190202605027.0 190202705028.0 190202805029.0 190202905030.0 190203005031.0 190203105032.0 190203205033.0 190203305034.0 190203405035.0 190203505036.0 190203605037.0 190203705038.0 190203805039.0 190203905040.0 190204005041.0 190204105042.0 190204205043.0 190204305044.0 190204405045.0 190204505046.0 190204605047.0 190204705048.0 190204805049.0 190204905050.0 190205005051.0 190205105052.0 190205205053.0 190205305054.0 190205405055.0 190205505056.0 190205605057.0 190205705058.0 190205805059.0 190205905060.0 1902060050

Ejectorpin6.35x102mm 1950500



12


BALFRA – HSS-Co RQX Cutter SetsWith Weldon shank 19.0 mm

Prod.-No. 1902001050




HSS-Co RQX Cutter Set Prod.-No.CuttingDepth25 mm 1902003025

6 pc. CutterSet:with1ea.ofØ 12.0 - 14.0 - 16.0 - 18.0 - 22.0 - 26.0 mminplasticboxincl.1ejectorpinProd.-No.1926500

HSS-Co RQX Cutter Set Prod.-No.CuttingDepth 25 mm 1902001025

10 pc. CutterSet:withØ2 x 12.0 - 2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 2 x 22.0 - 1 x 26.0 mminplasticboxincl.2ejectorpinsProd.-No.1926500


6 pc. CutterSet:with1ea.ofØ 14.0 - 16.0 - 18.0 - 20.0 - 22.0 - 26.0 mminplasticboxincl.1ejectorpinProd.-No.1950500


10 pc. CutterSet:withØ2 x 14.0 - 1 x 16.0 - 2 x 18.0 - 1 x 20.0 - 2 x 22.0 - 1 x 24.0 - 1 x 26.0 mminplasticboxincl.2ejectorpinsProd.-No.1950500

Prod.-No. 1902003050

Prod.-No. 1902001025

Prod.-No. 1902003025

HSS-Cobalt Cutters for stack drilling (drilling in sandwich material) on request! (Standard core drills aren't suitable.)

Dimensions in

inches available

upon request

B/45

BALFRA Rotabest® – ASP-30 RailWith Weldon shank 19.0 mm

■ WithWeldonshank19.0mm■ Internalbore:6.35mm■ Steelquality:Cobalthigh-capacityspeed

steelonpowder-metallurgicalbasewithhigh-estpurityandimprovedstrengthcomparedtooldergenerationpowdersteel.

■ Perfectlysuitableforwear-intensiveapplica-tions,suchasdrillingrails.

■ Thesetoolscanalsobeusedonallmagnetdrillingmachines,especiallywithWeldonshank.


14.0 190501402516.0 190501602517.0 190501702518.0 190501802519.0 190501902520.0 190502002522.0 190502202523.0 190502302524.0 190502402525.0 190502502526.0 190502602527.0 190502702527.5 190502752528.0 190502802530.0 190503002531.0 190503102532.0 190503202533.0 190503302534.0 190503402536.0 1905036025Ejectorpin6.35x77mm 1926500

Tip:Well-provenfordrillingHardoxandsimilarhigh-tensilesteels.Nameyourdrillingproblem,wearepleasedtoadvise.

Another Tip:ASP-60for"impossible"drillingjobsonrequest.

Suitable for:allportableMagnetDrillingMachineswith19mmWeldonarbor,butespeciallyforRailDrillingMachinesofthemakes:■ Cembre■ Erico■ KKT■ Dubuis■ Universal■ Magtron■ Rotabroach


14.0 190501405016.0 190501605017.0 190501705018.0 190501805019.0 190501905020.0 190502005022.0 190502205023.0 190502305024.0 190502405025.0 190502505026.0 190502605027.0 190502705027.5 190502755028.0 190502805030.0 190503005031.0 190503105032.0 190503205033.0 190503305034.0 190503405036.0 1905036050Ejectorpin6.35x102mm 1950500

Dimensions in

inches available

upon request

B/46

BALFRA – HSS-Co-Eco Cutters for FEIN-QUICK INSuitable for FEIN Magnet Drilling Machines

■ Suitable for FEIN Magnet Drilling Machines with Quick IN tool holder.■ YouuseFEINMagnetDrillingMachinesanddonotwanttodowithout

ALFRA-Rotabest®Cutters?HereisourrangeofHSS-Co-EcoCutterssuit-ableforthevariousFEINtypesofmachines.

■ Specialshank18.0mmwith4ballrecesses■ Steelquality:Specialhigh-capacityspeedsteel,cobalt■ Internalbore:6.4mm.■ suitablefor:FEINQuick-INquickchangearbor,FEINcoredrillingma-

chineswithQuick-INquick-changesystemoftypesKBM32Q,KBM50Q,KBM65Q,KBM65QF


12.0 190901203513.0 190901303514.0 190901403515.0 190901503516.0 190901603517.0 190901703518.0 190901803519.0 190901903520.0 190902003521.0 190902103522.0 190902203523.0 190902303524.0 190902403525.0 190902503526.0 190902603527.0 190902703528.0 190902803529.0 190902903530.0 190903003531.0 190903103532.0 1909032035

Ejectorpin6.35x106mm 1936500

■ Adaptor with internal thread M18 x 6P 1.5■ Also suitable for Hitachi machines


12.0 190801205013.0 190801305014.0 190801405015.0 190801505016.0 190801605017.0 190801705018.0 190801805019.0 190801905020.0 190802005021.0 190802105022.0 190802205023.0 190802305024.0 190802405025.0 190802505026.0 190802605027.0 190802705028.0 190802805029.0 190802905030.0 1908030050

ALFRA – HSS-Co-Eco Cutters suitable for FEIN + Hitachi

Prod.-No. 1936500

High performance toothing with pre- and post cutter

Dimensions

in inches

available upon

request

Dimensions in

inches available

upon request

B/47

B/48

ALFRA “Chip-breaker system”Very precise drilling in 3 steps.1 pre-cutter2 middle-cutter3 post-cutter

Usable on Magnet Drilling - and Pillar Drilling Machines. For constructional steels, hard-to-cut materials, such as chrome-nickel steels and for non-ferrous metals, such as aluminium or CuZn-alloys and many more.

Advantages of ALFRA ROTABEST® TCT Cutters

■ Good concentricity through solid construction

■ CAD - optimized cutting geometry for regular chip break

■ Specially shaped chip flutes to avoid chip jamming

■ Immediate centering

■ No running off center

■ Low torque

■ Minimum demand for energy

■ Quick core removal through ejector pin

■ Long tool life

B/49

BALFRA Rotabest® – TCT CuttersWith Weldon shank 19.0 mm

■ WithWeldonshank19.0mm■ Internalbore: Ø14-17mm=6.35mm Ø18-50mm=8.0mm■ Groundsection:highperformancetoothing

withpre-middle-andpostcutter■ Perfectlysuitableforwear-intensiveapplica-

tions.■ Thesetoolscanalsobeusedonallmagnetic

drillingmachineswithWeldonshank.


14.0 200301403515.0 200301503516.0 200301603517.0 200301703518.0 200301803519.0 200301903520.0 200302003521.0 200302103522.0 200302203523.0 200302303524.0 200302403525.0 200302503526.0 200302603527.0 200302703528.0 200302803529.0 200302903530.0 200303003531.0 200303103532.0 200303203533.0 200303303534.0 200303403535.0 200303503536.0 -37.0 -38.0 -39.0 -40.0 -41.0 -42.0 -43.0 -44.0 -45.0 -46.0 -47.0 -48.0 -49.0 -50.0-EjectorPin 1935500forØ14-17mm,6.35x87mm

EjectorPin 2001500forØ18-50mm,8x87mm

Suitable for:allmagneticdrillingmachineswithWeldonshank.ALFRA-Rotabest®(Weldon),ALFRA-Rota-Quick®quick-changesystem,onBDS,Bux,Ruko,Magnetor,Euroboor,Universal,Nitto,Jancy,Hougen,Magtron,Promac,Rotabroach,etc.


14.0 200301405015.0 200301505016.0 200301605017.0 200301705018.0 200301805019.0 200301905020.0 200302005021.0 200302105022.0 200302205023.0 200302305024.0 200302405025.0 200302505026.0 200302605027.0 200302705028.0 200302805029.0 200302905030.0 200303005031.0 200303105032.0 200303205033.0 200303305034.0 200303405035.0 200303505036.0 200303605037.0 200303705038.0 200303805039.0 200303905040.0 200304005041.0 200304105042.0 200304205043.0 200304305044.0 200304405045.0 200304505046.0 200304605047.0 200304705048.0 200304805049.0 200304905050.0 2003050050

EjectorPin 1950500forØ14-17mm,6.35x102

EjectorPin 2001501forØ18-50mm,8x102mm

ALFRA “Chip-breaker system”1 pre-cutter2 middle-cutter3 post-cutter

Speed Chart, see catalogue page B/132B/50

BALFRA Rotabest® – TCT CuttersSuitable for all core drilling, pillar drilling and milling machines

■ Heavyindustrialtypewith keyway and feather key■ Inextensivetestseries,thisspecialdesignwithkeywayandfeatherkey

hasprovenoutstandingcomparedtothestandardWeldonshank32mm.Optimalabsorptionofthehightorsionforces.

■ Groundsection:highperformancetoothingwithpre-middle-andpostcutter.

■ Required:Toolholderwithinternalcooling AL3 MT3 Prod.-No.20230 AL4 MT4 Prod.-No.20240 AL5 MT5 Prod.-No.20250■ Uponrequest:100mmcuttingdepthandejectorpin

8x160mmProd.-No.2001502

Ø in mm depth 50 mm Prod.-No.51.0 ■ 200205105052.0 ■ 200205205053.0 ■ 200205305054.0 ■ 200205405055.0 200205505056.0 ■ 200205605057.0 ■ 200205705058.0 ■ 200205805059.0 ■ 200205905060.0 200206005061.0■ 200206105062.0 ■ 200206205063.0 ■ 200206305064.0 ■ 200206405065.0 200206505066.0 ■ 200206605067.0 ■ 200206705068.0 ■ 200206805069.0 ■ 200206905070.0 200207005071.0 ■ 200207105072.0 ■ 200207205073.0 ■ 200207305074.0 ■ 200207405075.0 200207505076.0 ■ 200207605077.0 ■ 200207705078.0 ■ 200207805079.0 ■ 200207905080.0 200208005081.0 ■ 200208105082.0 ■ 200208205083.0 ■ 200208305084.0 ■ 200208405085.0 200208505086.0 ■ 200208605087.0 ■ 200208705088.0 ■ 200208805089.0 ■ 200208905090.0 200209005091.0 ■ 200209105092.0 ■ 200209205093.0 ■ 200209305094.0 ■ 200209405095.0 200209505096.0 ■ 200209605097.0 ■ 200209705098.0 ■ 200209805099.0 ■ 2002099050100.0 2002100050

■NoseriesproductionEjectorpin8x102mm 2001501ToolholderAL2/MT2 20220ToolholderAL3/MT3 20230ToolholderAL4/MT4 20240ToolholderAL5/MT5 20250 Prod.-No. 20230

Shorter, more stable tool setup. ALFRA Design.High concentricity.

Advantages of ALFRA TCT Cutters, “Heavy Industrial Type”■ Perfectcuttingbehaviour–evenatthefirstbore■ Excellentcenteringproperties■ Lowcuttingpressure–lowpowerinput■ Vibration-freeworkprocess■ Chipseparation–nojammingofthechips■ Cuttingdepthcanbeachievedinoneworkstep■ Drilledcoreejectedwithouteffort


Dimensions in

inches available

upon request

Not suitable for automatic feed. Dimensions in inches available upon request. B/51

BALFRA Rotabest® – TCT Cutters, RAILWith Weldon shank 19.0 mm

■ WithWeldonshank19.0mm■ Internalbore:6.35mm■ Perfectlysuitableforwear-intensiveapplica-

tions,suchasdrillingrails.■ Groundsection:highperformancetoothing

withpre-middle-andpostcutter


19.0 200501902520.0 200502002521.0 200502102522.0 200502202523.0 200502302524.0 200502402525.0 200502502526.0 200502602527.5 200502752528.0 200502802530.0 200503002531.0 200503102532.0 200503202533.0 200503302534.0 200503402536.0 2005036025Ejectorpin6.35x77mm 1926500

Suitable for:allportableMagnetDrillingMachineswith19mmWeldonarbor,butespeciallyforRailDrillingMachinesofthefollowingmakes:■ Cembre■ Erico■ KKT■ Dubuis■ Universal■ Magtron■ Rotabroach


19.0 200501905020.0 200502005021.0 200502105022.0 200502205023.0 200502305024.0 200502405025.0 200502505026.0 200502605027.5 200502755028.0 200502805030.0 200503005031.0 200503105032.0 200503205033.0 200503305034.0 200503405036.0 2005036050Ejectorpin6.35x102mm 1950500


B/52

BALFRA – HSS Cutters suitable for FEIN + Hitachi

■ 2008... with internal thread M18 x 6P 1.5. Also suitable for Hitachi machines

■ 2009... suitable for FEIN Magnet Drilling Machines with Quick IN tool holder.

Prod.-No. Prod.-No.Ø in mm M18 x 6P 1.5 Quick IN

Cutting Depth 50 mm Cutting depth 35 mm12.0 2008012050 200901203513.0 2008013050 200901303514.0 2008014050 200901403515.0 2008015050 200901503516.0 2008016050 200901603517.0 2008017050 200901703518.0 2008018050 200901803519.0 2008019050 200901903520.0 2008020050 200902003521.0 2008021050 200902103522.0 2008022050 200902203523.0 2008023050 200902303524.0 2008024050 200902403525.0 2008025050 200902503526.0 2008026050 200902603527.0 2008027050 200902703528.0 2008028050 200902803529.0 2008029050 200902903530.0 2008030050 200903003531.0 2008031050 200903103532.0 2008032050 200903203533.0 2008033050 200903303534.0 2008034050 200903403535.0 2008035050 200903503536.0 2008036050 200903603537.0 2008037050 200903703538.0 2008038050 200903803539.0 2008039050 200903903540.0 2008040050 200904003541.0 2008041050 200904103542.0 2008042050 200904203543.0 2008043050 200904303544.0 2008044050 200904403545.0 2008045050 200904503546.0 2008046050 200904603547.0 2008047050 200904703548.0 2008048050 200904803549.0 2008049050 200904903550.0 2008050050 200905003551.0 2008051050 200905103552.0 2008052050 200905203553.0 2008053050 200905303554.0 2008054050 200905403555.0 2008055050 200905503557.0 2008057050 200905703558.0 2008058050 200905803559.0 2008059050 200905903560.0 2008060050 200906003561.0 2008061050 200906103562.0 2008062050 200906203563.0 2008063050 200906303564.0 2008064050 200906403565.0 2008065050 2009065035 Ejectorpin6.35x106mm - 1936500

Thread adaptor M18 x 6P1.5

Prod.-No.1936500

Prod.-No. 2009...

Prod.-No. 2008...


Speed Chart, see catalogue page B/131 B/53

Motorwithhigh-performancegearbox

Continuouslyadjustablemitresupto45°(with5lockingpositions)

Ergonomicallydesignedhandle

SolidbaseplateAutomaticallyretractingbladeguard

B/54

B

Prod.-No. 22411

Theidealmachineforworksiteandworkshop,foralmostburr-freecuttingwithoutcooling.

Forfastandcleancutsinpipes,threadedrods,profiles,wireducts,corru-gatedandtrapezoidalsheets,sandwichpanels,drymortarlessconstructionprofilesandmanymore.

Advantages at a glance:■ 1800Watthigh-performancemotorforexactcutswithoutcoolant.■ Fastandeasychangeofsawblade.■ Continuouslyadjustablecuttingdepthto82mm.■ Thebasebladeisadjustableformitrecutsupto45°.■ Chipcollector.■ Theidealmachineforsiteassemblycompanies,facadebuilders,repair

shops,locksmitheries,rackbuilders,roofers,boothbuilders,weldingshops,plumbingandheatingcontractors.

■ Ideallyapplicable,whereanglegrindersaren´tstrongenoughorcleanenough.

■ Idealforweldpreparationbymitrecutting.■ Withopticallaserforproperalignmentofcuts.

ALFRA RotaSpeed® RS 230A

Sawbladediameter: 230(9”)Sawbladetoolholder: 25.4mm(1“)Power: 1800WattsSpeed,rpm: 2700Mitre: 0-45°Cuttingcapacitymm0°: 82Cuttingcapacitymm45°: 56Max.materialthickness(dependingonmaterial): 8mmVoltage: 230-50HzWeight: 8kg

Prod.-No.AlfraRotaSpeed®RS230A 22411

Scope of Supply:Machinewith2TCTSawBlades(premiumquality),OperationManual,RipFence,SetofTools,DistancesleeveforSawBladeArbor,incardboardbox.

Wereservetherighttomaketechnicalchanges.

ALFRA RotaSpeed® – Metal Cutting Saw RS 230AHand operated

B/55

BALFRA Circular Saw Blades – RotaSpeed®

ALFRA-RotaSpeed® TCT Circular Saw Blades. • Made in Germany

Magnetic Chip Remover

Inastainlesssteelroundrod,youcanmoveamagnetbackandforth.Thestrongmagnetpicksupmetalchips–pullaknobandthechipsfalloff.Formorecleanlinessintheworkplace.

Prod.-No.ALFRAMagneticChipRemover,Length400mm 18654

Prod.-No. 18654

■ Tungstencarbidetipped,suitableformetalcuttingsawsfrom: ALFRA,Flex,Euroboor,Evolution,Hitech,Jepson,Metallkraft,Ridgid,etc.

■ ThesespecialTCTcircularsawsensurefastandcleancutsinpipes,threadedrods,profiles,corrugatedandtrapezoidalsheets,wireducts,sandwichpanels,drymortarlessconstructionprofiles,fasteningprofiles(DINrails),gratesusingdrycuttingmethod.

■ Foruseonmetals,CrNisteel*,aluminium.

■ Highcuttingperformanceandtoollife.Theexcellentprice/performanceratiomakesthesesawshighlyeconomical.

■ Thecorrespondingmanufacturer'smachineguidelinesandnotesonusemustbeobservedwhenusingthesesawblades.

Premium Quality Cutting Application Dimensions mm No. Prod.-No. Ø mm of teeth

180/7“ Steel* 180x20 34 22205180/7“ Aluminium 180x20 48 22206

200/8“ Steel* 200x20 42 22255200/8“ Aluminium 200x20 54 22256200/8“ fortrapezoidalsheets 200x20 68 22257 230/9“ Steel* 230x25.4 48 22305230/9“ Aluminium 230x25.4 62 22306230/9“ fortrapezoidalsheets 230x25.4 80 22307

*Withstainlesssteel,thetoollifewillbelowerinrelationtothematerialthickness.Packagingunit=1piece

B/56

BALFRA RotaDry® – Drycutter 355

Prod.-No. 22420

355 x 2.6 x 25.4 • 90 T • coated

Arguments which are convincing in quality, performance and pricing:■ Foralmostburr-freecuttingofprofilesandpipesoutofsteel,iron, copper,brass,aluminium,plastics,compositesandstainlesssteel withoutcooling.■ Applicatione.g.insteelconstruction,cabinetmaking,interiorfittingsetc.■ Withdepthfenceforaccuratecutting■ Angleandparallelstopperformitrecutsupto45°■ Witharemovablechipcollectingsump■ Witharboradjustmentforchangingthesawblades■ Easytotransport

ALFRA RotaDry® 355

Sawbladediameter 355mmMotor 230V/50HzInput 2200WSpeed 1300rpmCuttingcapacity90° 13mmwallthickness 180x105mmCuttingcapacity90° 13mmwallthickness 120x120mmCuttingcapacity90° 13mmwallthickness 135mmCuttingcapacity45° 13mmwallthickness 110x100mmCuttingcapacity45° 13mmwallthickness 100x100mmCuttingcapacity45° 13mmwallthickness 105mmWeight 23kg

Prod.-No.AlfraRotaDry®355,with1TCTSawBlade72T(teeth) 22420

Accessories:Robust prism jaws 22421Perfect for sawing tubes with thin wall thickness

Spare TCT Circular Saw Blades also suitable for cutting-off machines, such as:

Jepson/Global/Ridgid/Ryobi

TheuniversalTCTsawbladeforfastcuttingof:steel – copper – aluminium– profiles– cable – sheet metal – solid material

■ withoutcoolant■ Regrindable■ Lownoiseduetolaserornaments

Deliverable dimensions Steel Prod.-No.

305x2.2x25.4 60T • 32100305x2.2x25.4 80T • 32101355x2.4/2.0x25.4 72T • 32108355x2.6x25.4 80T • 32103355x2.6x25.4 90T • 32102

355x2.6x25.4 90T coated 32105Othertoothcountsuponrequest.

B/57

Twistfreesawingframe–precisionmilled

Bandsawtensionknob

Robustbaseswithfeet

SteplessMitre0-45°(60°)

High-performancesingle-phase-motor

Ergonomichandle

Clampingvise

B/58

Portable Band Saw Machines for Professionals

There is a variety of portable band saw machines, but only a few of them are suitable for industrial applications or at a construction site.Pricing is usually being more important than relia-bility and durability.

Our new machines have an excellent price-perfor-mance-ratio and are setting new standards. The robust and compact design makes it ideal for handling in the machine shop or the construction site.

Ideally qualified for locksmiths, plumbing, metal-, heating-, pipeline- and mechanical workshops. Also for construction companies, public utilities with or without mobile workshops, power sta-tions, schools, technical learning and teaching facilities.

Special Features:

• Perfect Portable• For mitre cut 0 - 45 ° (60°) stepless• Very fast saw band exchange• Safe material clamping • Robust high-performance motor, rotation speed

continuously adjustable (also ideal for stainless steel)• Adjustable ball-bearing blade guide for accurate

angle cutting• Patented blade tensioning with overload

protection

Mitre stepless up to 45° (60°)Easy to carry handle

Perfect, adjustable blade adjustment Patented band tensioning

B/59

B

DRY - C U T

ALFRA Band Saw Machine – RC 105

Band Saw Machine RC 105 Prod.-No.BandSawMachineRC105 22600

Technical Data:1-phasemotor 950WPower 230VoltCuttingspeed 30bis80min-1

(speedregulationwiththermalandoverloadprotection)Mitre 0-45°Bandsawmeasurements 1335x13x0.65mmWeight 16kg

Scope of Supply:• PortableBandSawMachineRC105-230V• 1HSSBi-MetalBandsawblade• Operationmanual

Prod.-No. 22600

Cuttingcapacity

0° 105 mm 95 x 95 mm 100 x 85 mm45° 65 mm 65 x 65 mm 65 x 60 mm

MAX 105 mm

B/60

B

DRY - C U T


Technical Data:1-phasemotor 1.200WPower 230VoltCuttingspeed 30bis80min-1




Prod.-No. 22610

Cuttingcapacity


MAX 120 mm

B/61

B

DRY - C U T



Applicable for very big cutting widths, up to 205 mm max. perfect for wire ducts (cable trays), wall cable ducts etc.

Technical Data:1-phasemotor 1600WPower 230VoltCuttingspeed 60/80min-1

Mitre 0-45°Bandsawmeasurements 1735x13x0.9mmWeight 36kg


Prod.-No. 22650

Cuttingcapacity


MAX 205 mm

MAX

120

mm

MAX 205 mm

B/62

B

DRY - C U T

Band Saw Machine RCP 120 Prod.-No.BandSawMachineRCP120 22620



Scope of Supply:• PortableBandSawMachineRCP120-230V• 1HSSBi-MetalBandsawblade• Operationmanual

ALFRA Band Saw Machine – RCP 120

Prod.-No. 22620

Cuttingcapacity

0° 120 mm 112 x 112 mm 120 x 102 mm45° 80 mm 78 x 78 mm 78 x 78 mm60° 50 mm 43 x 43 mm 50 x 43 mm

CUTTING

T I M E

-60%

MAX 120 mm

B/63

B

DRY - C U T






Prod.-No. 22630

Cuttingcapacity


CUTTING

T I M E

-40%

MAX 150 mm

B/64

B

DRY - C U T



(konstantdurchelektr.Regelung)Mitre 0-60°Bandsawmeasurements 2140x19x0.9mmWeight 150kg

WorkbenchforRCP170incl.coolingdeviceandfiltration



Prod.-No. 22640

Cuttingcapacity

0° 170 mm 170 x 170 mm 198 x 55 - 190 x 130 mm45° 110 mm 110 x 110 mm 150 x 110 mm60° 75 mm 75 x 75 mm 100 x 70 mm

CUTTING

T I M E

-40%

MAX 170 mm

B/65

BALFRA HSS-Bi-Metal Saw Blades

suitablefor Dimension Prod.-No.

RotacutRC105

1335x13x0.65 mm 6 tpi 341-13065-1335-0600

1335x13x0.65 mm 8/12 tpi 341-13065-1335-0812

1335x13x0.65 mm 14 tpi 341-13065-1335-1400

RotacutRC120

1440x13x0.65 mm 6 tpi 341-13065-1440-0600

1440x13x0.65 mm 8/12 tpi 341-13065-1440-0812

1440x13x0.65 mm 14 tpi 341-13065-1440-1400

RotacutRC205

1735x13x0.9 mm 8/12 tpi 341-13090-1735-0812

1735x13x0.9 mm 14 tpi 341-13090-1735-1400

RotacutRCP120

1440x13x0.65 mm 6 tpi 341-13065-1440-0600R

1440x13x0.65 mm 8/12 tpi 341-13065-1440-0812R

1440x13x0.65 mm 14 tpi 341-13065-1440-1400R

RotacutRCP150

1735x13x0.9 mm 6 tpi 341-13090-1735-0600R

1735x13x0.9 mm 6/10 tpi 341-13090-1735-0610R

1735x13x0.9 mm 14 tpi 341-13090-1735-1400R

RotacutRCP170

2140x20x0.9 mm 4/6 tpi 341-20090-2140-0406R

2140x20x0.9 mm 6/10 tpi 341-20090-2140-0610R

2140x20x0.9 mm 14 tpi 341-20090-2140-1400R

B/66

BALFRA Workbench – RCT 6542

Prod.-No. 22601

Workbench RCT 6542 Prod.-No.WorkbenchRCT6542 22601

Advantages at a glance:

■ Inexpensive,collapsibleworkbench■ idealforconstructionsites■ Madefromsteelprofiles■ Three-levelheightadjustment740-820-870mm■ Forwiderangeofapplications■ Tablesize650x420mm■ ForallportableRotacutbandsawmachines■ Collapsible,portable■ Weight11kg

Scope of Supply:• PortableWorkbenchRCT6542• OperationManual

B/67

Double Acting

Single Acting

APS-120

APS-110-D

B/68

►► Easily portable, fully automatic Hydraulic Punching Units for steel-, bridge-, container, crane- and metal construction

►►Mobile use, no transport of material

►►Almost noiseless punching

►► Easy Positioning through Stop-funktion of punch

►► For choice: Single or Double Action

Hydraulic Punching Units - Press

APS-70 Eco – Set

B/69

BALFRA PRESS Hydraulic punches – OverviewMade in Germany by ALFRA

PageB/72 PageB/72 PageB/72 PageB/74 PageB/75

APS60 APS70 APS120 APS110D APS70Eco

Prod.-No. 23001 23002 23004 23181 23002.Eco

Max.holeØ 18mm 22mm 25mm 25mm 22mm 11/16“ 7/8“ 1-1/16“ 1-1/16“ 7/8“

Max.oblonghole – 22x14mm 25x18mm 25x18mm 22x14mm – 7/8”x9/16” 1”x11/16” 1”x11/16” 7/8”x9/16”

Max.materialthickness 10mm 13mm 16mm 16mm 13mm410-490N/mm2 3/8” 1/2“ 5/8“ 5/8“ 1/2“

Totalpunchingtimewithpump… SC05II-B:approx.7sec. SC05II-B:approx.10sec. SC05II-B:approx.16sec. SC17D:approx.8sec. SC03:approx.18sec. SC17:approx.4sec. SC17:approx.4sec. SC17:approx.5sec.

Throatdepth 60mm 70mm 110mm 110mm 70mm 2-3/8“ 2-3/4“ 4-3/8“ 4-3/8“ 2-3/4“

Max.pressure 700bar 700bar 700bar 700bar 700bar 10.150psi 10.150psi 10.150psi 10.150psi 10.150psi

Punchingforce 22t 30t 44t 44t 30t

Punchstroke 16mm 18mm 25mm 25mm 18mm 5/8“ 11/16“ 15/16“ 15/16“ 11/16“

Weight 17kg/37lbs 21kg/46lbs 35kg/77lbs 35kg/77lbs 21kg/46lbs

Scopeofdelivery Hydraulichose5m/Spanner Hydraulichose5m/Spanner Hydraulichose5m/Spanner Hydraulichose5m/Spanner Hydraulichose3m/Spanner Punch/dieØ14mm Punch/dieØ18mm Punch/dieØ22mm Punch/dieØ22mm Depthadjustment Depthadjustment,suspensionbracket Depthadjustment,suspensionbracket Depthadjustment,suspensionbracket

SC05II-B SC17 SC17D SC03

Prod.-No. 23007 23170 23186 23006

Max.pressure 750bar/10670psi 750bar/10670psi 750bar/10670psi 700bar/10150psi

Pumpingcapacity 0.94l/minat2770rpm 1.5l/minat1370rpm 1.4l/minat1370rpm 0.52l/minat2720rpm

Motorpower 1100W,230V(50Hz)* 1500W,230V(50Hz)* 1500W,230V(50Hz)* 550W,230V(50Hz)*

*Onrequest:230V(60Hz);110V(50Hz);110V(60Hz) *Onrequest:230V(60Hz);110V(50Hz);110V(60Hz)

Oilquantity 5l 17l 17l 2.5l

Weightincl.oil 27kg 45kg 47kg 17kg

ALFRA – Hydraulic PumpsMade in Germany by ALFRA

*Onrequest230V(60Hz);110V(50Hz);110V(60Hz)B/70

B

PageB/72 PageB/72 PageB/72 PageB/74 PageB/75

APS60 APS70 APS120 APS110D APS70Eco

Prod.-No. 23001 23002 23004 23181 23002.Eco

Max.holeØ 18mm 22mm 25mm 25mm 22mm 11/16“ 7/8“ 1-1/16“ 1-1/16“ 7/8“

Max.oblonghole – 22x14mm 25x18mm 25x18mm 22x14mm – 7/8”x9/16” 1”x11/16” 1”x11/16” 7/8”x9/16”

Max.materialthickness 10mm 13mm 16mm 16mm 13mm410-490N/mm2 3/8” 1/2“ 5/8“ 5/8“ 1/2“

Totalpunchingtimewithpump… SC05II-B:approx.7sec. SC05II-B:approx.10sec. SC05II-B:approx.16sec. SC17D:approx.8sec. SC03:approx.18sec. SC17:approx.4sec. SC17:approx.4sec. SC17:approx.5sec.

Throatdepth 60mm 70mm 110mm 110mm 70mm 2-3/8“ 2-3/4“ 4-3/8“ 4-3/8“ 2-3/4“

Max.pressure 700bar 700bar 700bar 700bar 700bar 10.150psi 10.150psi 10.150psi 10.150psi 10.150psi

Punchingforce 22t 30t 44t 44t 30t

Punchstroke 16mm 18mm 25mm 25mm 18mm 5/8“ 11/16“ 15/16“ 15/16“ 11/16“

Weight 17kg/37lbs 21kg/46lbs 35kg/77lbs 35kg/77lbs 21kg/46lbs

Scopeofdelivery Hydraulichose5m/Spanner Hydraulichose5m/Spanner Hydraulichose5m/Spanner Hydraulichose5m/Spanner Hydraulichose3m/Spanner Punch/dieØ14mm Punch/dieØ18mm Punch/dieØ22mm Punch/dieØ22mm Depthadjustment Depthadjustment,suspensionbracket Depthadjustment,suspensionbracket Depthadjustment,suspensionbracket

SC05II-B SC17 SC17D SC03

Prod.-No. 23007 23170 23186 23006

Max.pressure 750bar/10670psi 750bar/10670psi 750bar/10670psi 700bar/10150psi

Pumpingcapacity 0.94l/minat2770rpm 1.5l/minat1370rpm 1.4l/minat1370rpm 0.52l/minat2720rpm

Motorpower 1100W,230V(50Hz)* 1500W,230V(50Hz)* 1500W,230V(50Hz)* 550W,230V(50Hz)*

*Onrequest:230V(60Hz);110V(50Hz);110V(60Hz) *Onrequest:230V(60Hz);110V(50Hz);110V(60Hz)

Oilquantity 5l 17l 17l 2.5l

Weightincl.oil 27kg 45kg 47kg 17kg

ALFRA PRESS Hydraulic punches – OverviewMade in Germany by ALFRA

B/71

BALFRA Press – Hydraulic Punches, single-actingMade in Germany by ALFRA

ALFRA-Press APS 60 Prod.-No.HydraulicPunchingUnitwith 23001automaticreturnbymeansofneoprenespring,nooblongholes

Technical data:max.holeØmm 18mmmax.materialthicknesswithDINS275 10mmTotalpunchingtime:withpumpSC05IIB approx.7sec.withpumpSC17 approx.4sec.Throatdepth 60mmmax.pressure 700bar(10.000psi)Punchingforce 22tPunchstroke 16mmWeight 17kgScope of Supply: punchingunit,controlcable,hydraulichose5m,spanner,1punchanddieeach,Ø14mm

ALFRA-Press APS 70 Prod.-No.HydraulicPunchingUnitwith 23002automaticreturnbymeansofneoprenespring

Technical datamax.holeØmm 22mmOblongholesmax. 22x14mmmax.materialthicknesswithDINS275 13mmTotalpunchingtime:withpumpSC05IIB 10sec.withpumpSC17 4sec.Throatdepth 70mmmax.pressure 700bar(10.000psi)Punchingforce 30tPunchstroke 18mmWeight 21kgScope of Supply: punchingunit,controlcable,hydraulichose5m,spanner,1punchanddieeach,Ø18mm,1depthadjustment,1suspensionbracket

ALFRA-Press APS 120 Prod.-No.HydraulicPunchingUnitwith 23004automaticreturnbymeansofneoprenespring

Technical datamax.holeØmm 25mmOblongholesmax. 25x18mmmax.materialthicknesswithDINS275 16mmTotalpunchingtime:withpumpSC05IIB 16sec.withpumpSC17 5sec.Throatdepth 110mmmax.pressure 700bar(10.000psi)Punchingforce 44tPunchstroke 25mmWeight 35kgScope of Supply: punchingunit,controlcable,hydraulichose5m,spanner,1punchanddieeach,Ø22mm,1depthadjustment,1suspensionbracket

Importanttechnicalnotice:Thestandardpunchingunitsarenotsuitableforpunchinghigh-tensiletoolsteels,stainlesssteelsorboilerplates.Askforourtechnicaladviceforpunchingjobsinthisapplicationrange.

Prod.-No. 23002

Prod.-No. 23004

Type A B C D E F G H I J K L M N

APS60 60 17 12 51 73 92 75 40 74 162 360 552 110 135

APS70 70 24 15 51 85 100 80 40 80 204 382 562 125 135

APS120 110 25 18 51 111 110 90 68 100 285 442 585 144 135

Prod.-No. 23001

B/72

BALFRA Press – Hydraulic Punches, single-actingMade in Germany by ALFRA

ALFRA – Hydraulic PumpsMade in Germany by ALFRA

Prod.-No. 23007

Prod.-No. 23170

SC 17

For the use of our Punching Units, there are two Hydraulic Pumps available

ALFRA Hydraulic Pump SC 05 II-B for APS 60, 70, 120

Prod.-No.ALFRAHydraulicPumpSC05II-B 230V50Hz 23007ALFRAHydraulicPumpSC05II-B 230V60Hz 23007.230-60Hz*ALFRAHydraulicPumpSC05II-B 110V50Hz 23007.110-50Hz*ALFRAHydraulicPumpSC05II-B 110V60Hz 23007.110-60Hz*

Technical data:Operatingpressuremax. 750bar(10.670psi)Pumpingcapacity 0.94l/minat2.770rpmOilquantity 5.0lSingle-phasemotor2770rpm 1100W110Vor230V50Hzor60HzWeightincl.oil 27kg

*Onrequest

ALFRA Hydraulic Pump SC 17 for APS 60, 70, 120

Prod.-No.ALFRAHydraulicPumpSC17 230V50Hz 23170ALFRAHydraulicPumpSC17 230V60Hz 23170.230-60Hz*ALFRAHydraulicPumpSC17 110V50Hz 23170.110-50Hz*ALFRAHydraulicPumpSC17 110V60Hz 23170.110-60Hz*Completewithcontrolandswitchbox.

This new pump was especially developed to drastically reduce the punch-ing time.Speciallysuitablefortheuseintheworkshop.

Technical data:Operatingpressuremax. 750bar(10.670psi)Pumpingcapacity at50Hz1.50I/minat1.370rpmOilquantity 17lSingle-phasemotor1450rpm 1500W230V50HzWeightincl.oilandtransportrollers 45kgDimensionsLxWxH 550x370x560mm

*Onrequest

B/73

BALFRA Press – Hydraulic Punching Units, double-actingMade in Germany by ALFRA

Prod.-No. 23181

Prod.-No. 23186

Connector for double hose package

SC 17 D

Importanttechnicalnotice:Thestandardpunchingunitsarenotsuitableforpunchinghigh-tensiletoolsteels,stainlesssteelsorboilerplates.Askforourtechnicaladviceforpunchingjobsinthisapplicationrange.

Type A B C D E F G H I J K L M N

APS110D 110 24 18 55 90 112 73 41 78 295 387 468 141 124

ALFRA-Press APS 110D Prod.-No.HydraulicPunchingUnitwithautomaticreturn 23181

Technical datamax.holeØmm 25mmOblongholesmax. 25x18mmmax.materialthicknesswithDINS275 16mmTotalpunchingtimewithpumpSC17-D 8sec.Throatdepth 110mmmax.pressure 700bar(10.000psi)Punchingforce 44tPunchstroke 25mmWeight 35kg

Scope of Supply: Punchingunit,controlcable,hydraulichose5m,spanner,1punchanddieeach,Ø22mm,1depthadjustment,1suspensionbracket

ALFRA Hydraulic Pump SC 17D for APS 110DDouble Acting

Prod.-No.ALFRAHydraulic-PumpSC17D 230V50Hz 23186ALFRAHydraulic-PumpSC17D 230V60Hz 23186.230-60Hz*ALFRAHydraulic-PumpSC17D 110V50Hz 23186.110-50Hz*ALFRAHydraulic-PumpSC17D 110V60Hz 23186.110-60Hz*Completewithcontrolandswitchbox.

*Onrequest

With connector for double hose package.Thisnewpumpwasespeciallydevelopedtodrasticallyreducethepunch-ingtime.Speciallysuitablefortheuseintheworkshop.

Technical data:Operatingpressuremax. 750bar(10.670psi)Pumpingcapacity at50Hz1.40I/minat1.370rpmOilquantity 17lSingle-phasemotor1450rpm 1.500W230V50HzWeightincl.oilandtransportrollers 47kgDimensionsLxWxH 550x370x560mm

B/74

BALFRA Press – Hydraulic Punching Units, EcoMade in Germany by ALFRA

Prod.-No. 23002.Eco

Prod.-No. 23003 Eco-Set

Prod.-No.. 23006

Prod.-No. 03866-B

ALFRA Press APS 70 Eco Prod.-No.HydraulicPunchingUnitwith 23002.Ecoautomaticreturnbymeansofneoprenespring

Technical data:max.holeØmm 22mmmax.materialthicknesswithDINS275 13mmTotalpunchingtimewithPumpSC03 approx.18sec.Throatdepth 70mmmax.pressure 700bar(10.150psi)Punchingforce 30tPunchstroke 18mmWeight 21kgScope of Supply: APS70Ecohydraulicpunchingunit,controlcable,hydraulichose3m,spanner,depthadjustment

ALFRA Hydraulic Pump SC 03 for APS 70 Eco

Prod.-No.ElectrohydraulicpumpSC03 230V50Hz 23006ElectrohydraulicpumpSC03 230V60Hz 23006.230-60Hz*ElectrohydraulicpumpSC03 110V50Hz 23006.110-50Hz*ElectrohydraulicpumpSC03 110V60Hz 23006.110-60Hz*completewithhandswitch,2.0mhydraulichosewithquickcoupling*Onrequest

Optional: Prod.-No.Footswitchwith2-pedals,start-stopfunction 03866-B

Technical data:Motorvoltage: 230V/50Hz;230V/60Hz; 110V/50Hz;110V/60HzMotorpower: 0.55KW,2.720rpmMax.operatingpressure: 700barPumpcapacity: 62l/min.at60Hz 0.52l/min.at50HzTankvolume: 2.5l/useable:1.5lTemperatureswitch: 80°C+/-5°Weight: 17kgDimensionsLxWxH: 330x180x350mm

ALFRA Press APS 70 Eco-Set Prod.-No.Completeset 23003

Scope of Supply:ALFRAAPS70EcoHydraulicPunchingUnitALFRAHydraulicPumpSC03,230V/50HzHydraulichose,3mFootswitchSpanner

B/75

B

ALFRA – Service-BoyMade in Germany by ALFRA

ALFRA – Spring Hoists

For ALFRA Press Hydraulic Punching Units Prod.-No.withlocking device,springfracturesafetydevice,cable2.0m9362B 15-20kg 231509363B 20-25kg 231519366B 35-45kg 23152

Note:ActuationofspringhoistonlywithsuspendedPunchingUnitresp.underload.

for APS hydraulic pump bracket, all types – TÜV-tested –

Thishandytime-andenergysavingcartmakesthehandlingofourHydrau-licPunchingUnitsmorecomfortable.Absolutelynecessaryforeverystructuralsteelworker-evenwhereourHydraulicPunchingUnitsarealreadyused.

■ EasypositioningofthePunchingHeadatthesteelgirderduetogaspressureshockabsorber.

■ BeinglocatedontheServiceBoythehydraulicpumpdoesnotneedtobecarriedanylonger.

■ Toolcabinetwithdrawersforcleanarrangementofthepunchingtoolsandaccessories.

■ SolidandsafeconstructionwithTÜVcertificate(testedbytheGermanTechnicalSupervisionAuthority)-lessexpensivethanany“self-made”construction.

■ Dimensions(LxWxH):900x530x2000mm

Prod.-No.Completewithtoolcabinetanddrawers 23160

■ IMPORTANT: Please indicate the punch model with your order (APS 70 – 120 – 110 D)

Prod.-No. 23152

Prod.-No. 23160 (Tools and Punching Unit/Pump not included)

B/76

BALFRA – Original ToolsMade in Germany by ALFRA

Punches for APS 120/120 Eco APS 70/70 Eco APS 60 Ø mm Prod.-No. APS 110D ■ ■ ■ 7 23-01-07 ■ ■ ■ 8 23-01-08 ■ ■ ■ 9 23-01-09 ■ ■ ■ 10 23-01-10 ■ ■ ■ 11 23-01-11 ■ ■ ■ 12 23-01-12 ■ ■ ■ 13 23-01-13 ■ ■ ■ 14 23-01-14 ■ ■ ■ 15 23-01-15 ■ ■ ■ 16 23-01-16 ■ ■ ■ 17 23-01-17 ■ ■ ■ 18 23-01-18 ■ ■ - 19 23-01-19 ■ ■ - 20 23-01-20 ■ ■ - 21 23-01-21 ■ ■ - 22 23-01-22 ■ - - 23 23-01-23 ■ - - 24 23-01-24 ■ - - 25* 23-01-25

*)withtensionnutProd.-No.23004-056B

Dies for APS 120/120 Eco APS 70/70 Eco APS 60 Ø mm Prod.-No. APS 110D ■ ■ - 7 23-02-07 ■ ■ - 8 23-02-08 ■ ■ - 9 23-02-09 ■ ■ - 10 23-02-10 ■ ■ - 11 23-02-11 ■ ■ - 12 23-02-12 ■ ■ - 13 23-02-13 ■ ■ - 14 23-02-14 ■ ■ - 15 23-02-15 ■ ■ - 16 23-02-16 ■ ■ - 17 23-02-17 ■ ■ - 18 23-02-18 ■ ■ - 19 23-02-19 ■ ■ - 20 23-02-20 ■ ■ - 21 23-02-21 ■ ■ - 22 23-02-22 ■ - - 23 23-02-23 ■ - - 24 23-02-24 ■ - - 25 23-02-25 - - ■ 7 23-03-07 - - ■ 8 23-03-08 - - ■ 9 23-03-09 - - ■ 10 23-03-10 - - ■ 11 23-03-11 - - ■ 12 23-03-12 - - ■ 13 23-03-13 - - ■ 14 23-03-14 - - ■ 15 23-03-15 - - ■ 16 23-03-16 - - ■ 17 23-03-17 - - ■ 18 23-03-18

Important:FormaterialDINS233:max.materialthickness=0.8xholeØFormaterialDINS275:max.materialthickness=0.5xholeØ

Prod.-No. 23-01-..

Prod.-No. 23-02-..

Tip:Punches and Dies are interchangeable with Nitto/Selfer Punching Systems.

Tip:Please oil punch from time to time, when mate-rial is heavily oxidized.

B/77

BALFRA – Original ToolsMade in Germany by ALFRA

Prod.-No. 23-02-..

Prod.-No. 23-01-..

Prod.-No. 23015

Prod.-No. 23020

Prod.-No. 23004-056A Prod.-No. 23004-056BFor punch Ø 7 - 24 mm For punch Ø 25 mm

5°-bevelled Dies for APS 120 APS 70 Ø mm Prod.-No. APS 110D ■ ■ 10 23-04-10 ■ ■ 11 23-04-11 ■ ■ 12 23-04-12 ■ ■ 13 23-04-13 ■ ■ 14 23-04-14 ■ ■ 15 23-04-15 ■ ■ 16 23-04-16 ■ ■ 17 23-04-17 ■ ■ 18 23-04-18 ■ ■ 19 23-04-19 ■ ■ 20 23-04-20 ■ ■ 21 23-04-21 ■ ■ 22 23-04-22 ■ - 23 23-04-23 ■ - 24 23-04-24 ■ - 25 23-04-25

Oblong tools for APS 120 APS 70 Punch Diemm APS 110D Prod.-No. Prod.-No.16x8 ■ ■ 23-01-1608 23-02-160818x9 ■ ■ 23-01-1809 23-02-180918x11 ■ ■ 23-01-1811 23-02-181120x10 ■ ■ 23-01-2010 23-02-201020x12 ■ ■ 23-01-2012 23-02-201220x14 ■ ■ 23-01-2014 23-02-201422x11 ■ ■ 23-01-2211 23-02-221122x14 ■ ■ 23-01-2214 23-02-221424x12 ■ - 23-01-2412 23-02-241225x9* ■ - 23-01-2509 23-02-250925x12* ■ - 23-01-2512 23-02-251225x13* ■ - 23-01-2513 23-02-251325x14* ■ - 23-01-2514 23-02-251425x18* ■ - 23-01-2518 23-02-2518

*)withtensionnutProd.-No.23004-56BOtherdimensionsonrequest

Spare parts Prod.-No.Sparehigh-pressureconnectionhose, 3 m (forEcoseriesonly) 23010completewithcontrolcableandcoupling

Sparehighpressureconnectionhose, 5 m 23015completewithcontrolcableandcoupling Sparehighpressureconnectionhose,*10 m 23016completewithcontrolcableandcoupling Sparehigh-pressureconnectionhose, *15 m 23017completewithcontrolcableandcoupling

Sparehighpressureconnectionhose, 5 m 23020ForAPS110D(double-acting)completewithcontrolcableandcoupling

Note:Thepressurebuildupis4seclongerwith10m,6seclongerwith15m

TensioningnutforpunchØ7-24mm 23004-056ATensionnutforpunchesØ25mm(onlyAPS120) 23004-056BTensioningnutforpunchØ26mm(onrequest) 23004-056C

Prod.-No. 23-04-.. (for girders with bevelled beams)

B/78

Date post:	09-Mar-2016
Category:	Documents
Upload:	techprof-service
View:	228 times
Download:	0 times

4b./7. Alfra Magneetboormachines (engels)

Documents