20
www.catpumps.com Product Quality, Reliability and Support You Expect Pressure Washing Solutions A Pump for Every Pressure Washer
1For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
www.catpumps.com
Product Quality, Reliability and Support You Expect
Pressure Washing SolutionsA Pump for Every Pressure Washer
2 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
One of the most critical components in a pressure wash system is the pump. The pump transfers energy from the engine/motor to move water and wash solutions under pressure to the nozzle. Because the pump sees system pressures and works with a variety of fluids, it has a tough job to do. Specifying the best pump for the application is vital to long trouble-free service. That’s where Cat Pumps comes into play.
Cat Pumps extensive product line provides a solution for every pressure washing application — portable or stationary:
• Direct-drive pumps for gas and electric systems provide economy and a compact footprint.
• Belt-drive pumps offer flexibility in meeting your performance requirement.
• Gearbox pumps mount directly to gas engines for heavy-duty portable washing applications.
• Bell housing and flexible coupling motor-pump units provide a durable direct-drive alternative.
• Custom power units for large industrial pressure cleaning.
• Accessories to match each pump or custom pressure washing system performance.
Cat Pumps Offers Lowest Cost of OwnershipWhen quality counts, Cat Pumps is the #1 choice for pressure washer pumps. Less expensive pumps actually cost more in the long run. Preventing just one hour of downtime covers any price difference. Get more work done — with far fewer hassles — by specifying Cat Pumps.
Cat Pumps customers enjoy the following benefits:
• Higher productivity and less downtime
• Fewer repairs and much less maintenance costs
• Greater confidence in equipment performance
Keep Your Pressure Washer Running with Cat Pumps
For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
3For more information, contact Cat Pumps at (763) 780-5440 • catpumps.comFor more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Cat Pumps designs and builds products to the highest quality levels. Every last design detail is optimized for product life and performance. Examples include the following features:
• Specially formulated seals and high density, polished ceramic plungers typify the attention to design detail that results in thousands of hours of trouble-free service
• Stainless steel valves, seats and springs provide corrosion resistance, positive seating and long life
• Wet seal design increases service life by allowing pumped fluids to cool and lubricate the elastomers on both sides
Quality You Need to Keep Your Equipment Running
A wide range of pump options are available, including a variety of products that meet industry certifications and directives.
• Flow: 0.13 to 240 gpm (0.49 to 908 lpm)
• Pressure: 100 to 10,000 psi (6.9 to 689 bar)
• RPM: 100 to 3450
• Liquid Temperature: -10° to 200°F (-23° to 93°C)
• Manifold Materials: Brass, Nickel Aluminum Bronze, 304 and 316 Stainless Steel, Duplex Stainless Steel. Other materials available on request
• Sealing Material: NBR, FPM, EPDM, PTFE, silicone-free and other materials available upon request
• Drives: Electric, Engine, Hydraulic, Pneumatic
Product Specification Range
Model 356020 gpm (76 lpm), 4000 psi (276 bar)
4 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Pump Model
Shaft Flow Pressure Pump
Size gpm lpm psi bar rpm4DNX25GSI 3/4" 2.5 9.5 3000 207 3450
4DNX27GSI 3/4" 2.7 10.2 3000 207 3450
3DX29GSI 3/4" 2.9 11.0 2500 172 3450
2SF30GS 3/4" 3.0 11.4 2000 138 3450
2SFX30GZ 3/4" 3.0 11.4 2500 172 3450
2SF35GS 3/4" 3.5 13.2 2000 138 3450NOTE: Remove gas adapter plate when mounting pump to 3/4" shaft electric motor. Electric Motor Horsepower (HP) = gpm x psi / 1460. For required Engine Horsepower contact engine manufacturer.
Direct Drive, Hollow Shaft 3/4" Engine and Motor
2SF30GS
Pump Model
Shaft Flow Max. Pressure Pump
Size gpm lpm psi bar rpm4DX15EUF 5/8" 1.5 5.7 2000 138 3450
4DX20EUF 5/8" 2.0 7.6 2000 138 3450
4SP21ELU 5/8" 2.1 7.9 2000 138 1725
2SF22ES 5/8" 2.2 8.3 2000 138 3450
4DX27EUF 5/8" 2.7 10.2 2000 138 3450
4SP29ELU 5/8" 2.9 11.0 1500 103 1725
4DX30EUF 5/8" 3.0 11.4 1500 103 3450
2SF35ES 5/8" 3.5 13.2 1500 103 3450NOTE: All 3450 rpm rated pumps can operate at 1725 rpm, thus reducing flow by 50%. Electric Motor Horsepower (HP) = gpm x psi / 1460
Pump Model
Shaft Flow Max. Pressure Pump
Size gpm lpm psi bar rpm5SP30ELU 1-1/8" 3.0 11.4 3000 207 1725
5SP35ELU 1-1/8" 3.5 13.2 2500 172 1725
5SP40ELU 1-1/8" 4.0 15.1 2000 138 1725
4SF40ELS 1-1/8" 4.0 15.1 3500 241 1725
4SF45ELS 1-1/8" 4.5 17.0 3000 207 1725
4SF50ELS 1-1/8" 5.0 18.9 3000 207 1725
Electric Motor Horsepower (HP) = gpm x psi / 1460
Plunger PumpsDirect Drive, Hollow Shaft 5/8" NEMA 56C
Direct Drive, Hollow Shaft 1-1/8" Electric NEMA 184TC
4DX10ER w/ Electric Motor
5SP35ELU w/ Electric Motor
5For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Plunger Pumps
Pump Model
Shaft Flow Pressure Pump
Size gpm lpm psi bar rpm66DX30G1I 1" 3.0 11.4 4000 275 3400
4SPX32G1I 1" 3.2 12.2 3000 207 3450
66DX35G1I 1" 3.5 13.2 4000 275 3400
66DX40G1I 1" 4.0 15.0 4000 275 3400
4SF45GS1 1" 4.5 17.0 3000 207 3200
4SF50GS1 1" 5.0 18.9 3000 207 3200Electric Motor Horsepower (HP) = gpm x psi / 1460. For required Engine Horsepower contact engine manufacturer.
Direct Drive, Hollow Shaft 1" Engine
66DX40G1i w/ Engine
Pump Model
Shaft Flow Pressure Pump Engine
Size gpm lpm psi bar rpm rpm740G1 1" 2.8 10.6 5000 345 1700 3465
3CP1120G 3/4" 3.5 13.2 2200 152 1420 3600
5CP3160CSSG1 1" 4.0 15.1 3500 241 1627 3320
60G1 1" 4.2 15.9 4000 275 1570 3200
5CP3120CSSG1 1" 4.5 17.0 3500 241 1645 3353
700G1 1" 4.5 17.0 5000 345 1700 3465
5CP5135CSSG1 1" 5.0 18.9 3500 241 1480 3090
5CP5140CSSG1 1" 5.5 20.8 3500 241 1500 3060
5CP6120CSSG1 1" 6.7 25.4 1600 110 1570 3200
56G1 1" 8.0 30.3 2500 172 1760 3600
5CP6190G1 1" 8.7 32.9 1200 83 1570 3200
7CP6110CSG1 1" 10.0 38.0 2000 138 1667 3400
7CP6170G1 1" 12.0 45.4 1800 124 1600 3264NOTE: All 1" versions are available with 1-1/8" Electric Motor Horsepower (HP) = gpm x psi / 1460. For required Engine Horsepower contact engine manufacturer.
Direct Drive, Gearbox 3/4", 1" and 1-1/8"
5CP3120CSSG1 w/ Engine
6 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Bell Housing/Flex Coupling Mounting Components, NEMA
Pump Model
NEMA Motor Bell Housing Flex Coupling
Frame Assembly Assembly5CP Series 143/145C 76056.5CP 8260
182/184TC 76184.5CP 8230
213/215TC 76215.5CP 8275
254/256TC 76256.5CP 82177FR (Models: 56, 60, 700) 213/215TC 76215.7FR 8375
254/256TC 76256.7FR 83807CP6110 182/184TC 76184.7CP 8370
213/215TC 76215.7CP 8375
254/256TC 76256.7CP 8380NOTE: Contact Cat Pumps for complete motorized pump units (pump, motor, bellhousing & flexible coupling) *IEC Bell Housings also available, contact Cat Pumps
Pump Model
Flow Max. Pressure Pump
gpm lpm psi bar rpm5CP4110CSS 2.2 8.4 4000 276 1750
5CP4112CSS 2.7 10.3 4000 276 1750
740 2.9 11.0 5000 345 1750
5CP4114CSS 3.2 12.1 4000 276 1750
5CP3110CSS 3.6 13.6 3500 241 1725
760 3.6 13.6 5000 345 1750
5CP4116CSS 3.8 14.4 4000 276 1725
5CP4118CSS 4.2 16.0 4000 276 1750
5CP3160CSS 4.3 16.3 3500 241 1750
5CP4120CSS 4.5 17.0 4000 275 1750
60 4.7 17.8 4000 275 1750
700 4.7 17.8 5000 345 1750
5CP3120CSS 4.8 18.2 3000 207 1750
5CP5120 6.0 22.7 2500 172 1750
5CP5140CSS 6.7 25.5 3000 207 1750
5CP6120 7.4 28.0 1200 83 1750
56 8.0 30.3 2500 172 1760
5CP6180CSS 8.2 31.0 1500 103 1750
5CP6190 9.7 36.7 1200 83 1750
7CP6110CS 10.5 39.7 2000 138 1750
7CP6160CS 10.6 40.1 2500 172 1750Electric Motor Horsepower (HP) = gpm x psi / 1460
Plunger PumpsDirect Drive Bell Housing, Electric Motor
5CP3120CSS w/ Bell Housing, Motor
Bell Housing / Flex Coupling
7For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Pump Model
Flow Pressure Pump
gpm lpm psi bar rpm1810 3.0 11.4 10000 689 1500
5CP3120 4.5 17.0 3500 241 1645
5CP3120CSS 4.5 17.0 3500 241 1645
57 4.5 17.0 4000 275 1285
5CP4120CSS 4.5 17.0 4000 275 1750
700 4.5 17.0 5000 345 1700
5CP5120 5.0 18.9 3000 207 1415
550 5.0 18.9 3000 207 1415
56 5.5 20.8 3500 241 1210
5CP5140 5.5 20.8 3500 241 1500
5CP6120 6.0 22.7 1600 110 1400
1570 6.0 22.7 6000 414 1350
5CP6190 8.0 30.2 1450 100 1450
1560 9.0 34.0 4000 275 1140
1050 10.0 38.0 2200 152 958
660 10.0 38.0 3000 207 1429
3507 10.0 38.0 5000 345 915
3550 10.0 38.0 6000 414 940
7CP6170 11.0 41.6 2000 138 1450
1050 Alt. 12.0 45.4 1800 124 1150
7CP6170Alt. 12.0 45.4 1800 124 1600
1580 12.0 45.4 3000 207 1180
1530 15.6 59.0 1500 103 1450
1540E 18.0 68.1 1200 83 1100
2510 20.0 75.7 2000 138 1450
3560 20.0 75.7 4000 275 1160
3560 Alt. 25.0 94.6 3000 207 1450Electric Motor Horsepower (HP) = gpm x psi / 1460
Plunger PumpsSolid Shaft Belt, Hydraulic, PTO
5CP5140
8 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
AccessoriesMounting Components, SAE Hydraulics Bell Housing Assembly
Mounting Components, SAE Hydraulics Flexible Coupler Assembly
Pump Series Models SAE
TypeBell Housing
Assembly
3CP Series 3CP1120-1140 A2 76SAEA2.3CP
B2 76SAEB2.3CP
B4 76SAEB4.3CP
5CP Series 5CP3105, 3110, 3160, 3120, 5CP4120, 5120, 6120, 6180CSS, 6190
A2 76SAEA2.5CP
B2 76SAEB2.5CP
B4 76SAEB4.5CP
7CP Series 7CP6110CS, 7CP6170 A2 76SAEA2.7CP
B2 76SAEB2.7CP
B4 76SAEB4.7CP
7FR Series 56, 60, 700, 740, 760 A2 76SAEA2.7FR
B2 76SAEB2.7FR
B4 76SAEB4.7FRBell Housing Assemblies include mounting hardware and flange
SAE TYPE:A2 = SAE "A" 2 Bolt, 3.25" PilotB2 = SAE "B" 2 Bolt, 4" PilotB4 = SAE "B" 4 Bolt, 4" Pilot
Pump Series
SAEType
Flex CouplerAssy
Shaft to Shaft
HPRating
3CP A2 8271 16.5mm x 5/8" 10
B2, B4 8272 16.5mm x 7/8" 10
5CP A2 8273 20mm x 5/8" 10
B2, B4 8274 20mm x 7/8" 10
7CP & 7FR A2 8371 24mm x 5/8" 20
B2, B4 8372 24mm x 7/8" 20
SAE TYPE:A2 = SAE "A" 2 Bolt, 3.25" PilotB2 = SAE "B" 2 Bolt, 4" PilotB4 = SAE "B" 4 Bolt, 4" Pilot
991903
5CP3120CSS w/ SAE Motor
9For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Accessories
34963
Model Clutch Diameter/ Number of Grooves
Belt Type
Pump Shaft Diameter
Pump Models
34960 7" / 1 A 16.5 mm 3CP1120 - 1140
34965 7" / 2 A 16.5 mm 3CP1120 - 1140
34970 7" / 1 A 20.0 mm5CP2120W - 2150W, 3120/3120CSS, 5120 - 5140CSS, 5CP6120 - 619034980 7" / 2 A 20.0 mm
34299 7.3" / 8 Poly-V, L-Style 20.0 mm
34959 7.3" / 8 Poly-V, L-Style 24.0 mm 56, 60, 530, 550, 700, 740, 760
34971 7.3" / 8 Poly-V, L-Style 24.0 mm 7CP6110CS - 7CP6170
76970 10" / 2 B 20.0 mm 5CP2120W - 2150W, 3120/3120CSS, 5120 - 5140CSS, 5CP6120 - 6190
34628 12.4" / 1 B 24.0 mm 56, 60, 700, 740, 760
34630 12.4" / 2 B 24.0 mm 56, 60, 700, 740, 760
34563 12.4" / 2 B 30.0 mm 1050, 1570, 1580
30655 12.4" / 2 B 30.0 mm 2510, 2530
Clutches, 12 VDC
Unloaders, Trapped Pressure Brass Models
Model Flow Range Pressure Range Portsgpm lpm psi bar Inlet/Discharge Bypass
7500S 0.5 - 6.0 1.9 - 23 100 - 2000 6.9 - 138 3/8" NPT(M) 3/8" NPT(F)
7581 0.5 - 6.5 1.9 - 25 800 - 2300 55 - 158 3/8" NPT(M) 3/8" NPT(F)
7583 0.5 - 8.0 1.9 - 30 250 - 2000 6.9 - 138 3/8" NPT(M) 3/8" NPT(F)
7620 0.5 - 8.0 1.9 - 30 100 - 3200 6.9 - 220 3/8" BSP(M)/BSP(F) 3/8"BSP(F)
7693 2.5 - 10.5 9.5 - 40 230 - 2300 16 - 60 3/8" NPT(F) 3/8" NPT(F)
7694 2.5 - 10.5 9.5 - 40 400 - 4050 28 - 280 3/8" NPT(F) 3/8" NPT(F)
7630 2.0 - 10.5 8 - 40 400 - 5100 28 - 350 3/8" NPT(M)/BSP(F) 1/2" NPT(F)
9970 0.5 - 15.9 1.9 - 60 1160 - 11600 80 - 800 1/2" BSPP(G) 1/2" BSPP(G)
7537 1.0 - 21 3.8 - 80 230 - 2600 16 - 179 1/2" NPT(F) 1/2" NPT(F)
7542 1.0 - 21 3.8 - 80 800 - 4000 55 - 275 1/2" NPT(F) 1/2" NPT(F)
7590 10 - 52 38 - 200 400 - 2175 28 - 150 1" NPT(F) 1" NPT(F)
7592 10 - 52 38 - 200 450 - 2500 31 - 175 1" NPT(F) 1" NPT(F)
7593 10 - 52 38 - 200 750 - 4050 51 - 280 1" BSPP(G) 1" BSPP(G)
9950 50 - 120 189 - 454 100 - 2900 7 - 200 1-1/4" BSPP(G) 1-1/4" BSPP(G)
7537
7694
Converting Unloader into a Relief ValveAll trapped pressure unloaders can be configured as a pressure relief valve by removing the check valve from the discharge fitting. To order a relief valve, add “.100” at the end of the unloader part number. Example: 7537 = Pressure Unloader and 7537.100 = Pressure Relief Valve.
10 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
ModelMax. Flow Pressure Range Max. Relief Setting Ports
gpm lpm psi bar psi bar Inlet/Discharge Bypass
30960 6.0 22.7 300 - 1500 20 - 103 1650 114 1/4" NPT(M) 3/4" Barb
33960 6.0 22.7 300 - 1500 20 - 103 1650 114 3/8" NPT(M) 3/4" Barb
30961 6.0 22.7 1000 - 3000 6.9 - 207 3300 228 1/4" NPT(M) 3/4" Barb
33961 6.0 22.7 1000 - 4000 6.9 - 275 4400 303 1/4" NPT(M) 3/4" Barb
33962 6.0 22.7 1000 - 4000 6.9 - 275 4400 303 3/8" NPT(M) 3/4" Barb
9940 25 95 1000 - 4000 6.9 - 275 4400 303 3/4" NPT(M) 1" Barb
AccessoriesPop-Off Valves Secondary pressure control
Pressure Gauges Brass Models (Brass Fitting and Bourdon Tube, 304 SS Case)
Thermal Valves Brass Models
30961 9940
ModelPressure Range
Max. Temp (°F)Ports
psi bar Inlet6086 0 - 1500 0 - 103 140 1/4" NPT(M)
6088 0 - 3000 0 - 207 140 1/4" NPT(M)
6089 0 - 6000 0 - 415 140 1/4" NPT(M)6088
ModelMax. Flow Max Pressure Temperature Ports
gpm lpm psi bar Max (°F) Inlet Bleed7140 25 95 125 8.6 145 1/4" NPT(M) 1/8" NPT(F)
7141 25 95 125 8.6 145 3/8" NPT(M) 1/8" NPT(F)
7142 25 95 125 8.6 145 1/2" NPT(M) 1/8" NPT(F)
7143 25 95 125 8.6 165 1/4" NPT(M) 1/8" NPT(F)
7144 25 95 125 8.6 165 3/8" NPT(M) 1/8" NPT(F)
7145 25 95 125 8.6 165 1/2" NPT(M) 1/8" NPT(F)
7146 25 95 125 8.6 130 1/4" NPT(M) 1/8" NPT(F)
7170 25 95 125 8.6 180 1/4" NPT(M) 1/8" NPT(F)
7171 25 95 125 8.6 180 3/8" NPT(M) 1/8" NPT(F)
7172 25 95 125 8.6 180 1/2" NPT(M) 1/8" NPT(F)
7175 25 95 125 8.6 190 1/4" NPT(M) 1/8" NPT(F)
7176 25 95 125 8.6 190 3/8" NPT(M) 1/8" NPT(F)
7177 25 95 125 8.6 190 1/2" NPT(M) 1/8" NPT(F)
7142
7140
11For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
AccessoriesShut-off Guns Brass Models
ModelMax. Flow Max Pressure
TypePorts
gpm lpm psi bar Inlet Bleed33425 8 30 2900 200 Front Load 3/8" NPT(F) 1/4" NPT(F)
76165 8 30 4000 275 Shut-off 3/8" NPT(F) 1/4" NPT(F)
35150 8 30 5000 345 Shut-off 3/8" NPT(F) 1/4" NPT(F)
31260 8 30 5100 350 Pressure Compensating 3/8" NPT(F) 1/4" NPT(F)
32300 10 38 3000 207 Dump, w/15" Lance 3/8" NPT(F) 1/8" NPT(F)
32301 10 38 3000 207 Dump, w/39" lance 3/8" NPT(F) 1/8" NPT(F)
31137 10 38 4500 310 Horizontal 3/8" NPT(F) 1/4" NPT(F)
31811 10.5 40 4500 310 Shut-off 3/8" NPT(F) 1/4" NPT(F)
36140 10.5 40 5000 345 Shut-off 3/8" NPT(F) 1/4" NPT(F)
31265 13 49 3650 252 Pressure Compensating 3/8" NPT(F) 1/4" NPT(F)
39410 21 80 7250 500 Shut-off 1/2" BSP(F) 1/2" BSP(F)
39415 32 121 1750 120 Shut-off 1/2" BSP(F) 1/2" BSP(F)
39420 53 200 2900 200 Shut-off 1/2" BSP(F) 1/2" BSP(F)
31137
31260
36140
Valve Plug Adapters
Model Models Used Port Material76135 4DX, 4DNX, 4SPX, 4SP 1/4" NPT (F) BB
35758 66DX 3/8" NPT (F) BB
998954 3CP Series 3/8" NPT (F) BB
76658 310, 5CP2120, 2150W 3/8" NPT (F) BB
34549 45, 5CP3105 - 3160CSS, 5120 - 5140 3/8" NPT (F) BB
45939T 56-60 3/8" NPT (F) BB
34447 7PFR, 15PFR, 5CP6120, 7CP 3/8" NPT (F) BB
997878 3560 1/4" NPT (F) BB
34549
12 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Accessories
ModelsSuction/Pressurized Flow Screen Ports
gpm lpm Mesh Material Inlet DischargeWHITE OR CLEAR NYLON BODY
7104 / 7104.4* 6/10 23/38 80 S 1/2" NPT(F) 1/2" NPT(F)
7105 / 7105.5* 15/20 57/76 80 S 3/4" NPT(F) 3/4" NPT(F)
7106 / 7106.6* 20/25 76/95 80 S 1" NPT(F) 1" NPT(F)
7107 / 7107.7* 35/50 133/189 80 S 1-1/4" NPT(F) 1-1/4" NPT(F)
7108 / 7108.8* 60/75 227/284 80 S 1-1/2" NPT(F) 1-1/2" NPT(F)
WHITE OR CLEAR NYLON BODY (MICRO)
7203 / 7203.3* 10 gpm max 38 80 S 1/2" NPT(M) 1/2" NPT(M)
7204 / 7204.4* 10 gpm max 38 80 S 1/2" NPT(F) 1/2" NPT(F)
REINFORCED COMPOSITE BODY (w/ brass threaded ports, 1/4” BSP(F) auxiliary port)32738 8 gpm max 30 50 SS 1/2" BSP(F) 1/2" BSP(M)
32748 8 gpm max 30 50 SS 1/2" BSP(F) 1/2" BSP(F)*Clear Nylon Body
Filters
ModelsMaximum Pressure Engaging Pressure Voltage
RangeMaximum
AMPInletPortpsi bar psi bar
STAINLESS STEEL - NPT PORTS
31615 3650 250 215 15 12 - 250 6 1/4" NPT(M)
31625 3650 250 360 25 12 - 250 6 1/4" NPT(M)
31640 3650 250 580 40 12 - 250 6 1/4" NPT(M)
7203
7107
7104.4
31615
Pressure Switches
13For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Accessories
Models NozzleSIZE
Flow Range Pressure RangePort
gpm lpm psi barTURBO-NOZZLES (with ceramic nozzle)
7265.20 2.0 1.1 - 1.7 4.1 - 6.4 1200 - 3000 83 - 207 1/4" BSP(F)7265.30 3.0 1.6 - 2.6 6.0 - 9.8 1200 - 3000 83 - 207 1/4" BSP(F)7265.35 3.5 1.9 - 3.0 7 - 11 1200 - 3000 83 - 207 1/4" BSP(F)7265.40 4.0 2.2 - 3.5 8.3 -13 1200 - 3000 83 - 207 1/4" BSP(F)7265.45 4.5 2.4 - 3.9 9 - 14.8 1200 - 3000 83 - 207 1/4" BSP(F)7265.50 5.0 2.8 - 4.4 10.6 - 16.7 1200 - 3000 83 - 207 1/4" BSP(F)7265.55 5.5 3.0 - 4.8 11.1 - 18.2 1200 - 3000 83 - 207 1/4" BSP(F)7265.60 6.0 3.2 - 5.2 12.1 - 19.7 1200 - 3000 83 - 207 1/4" BSP(F)7265.65 6.5 3.6 - 5.7 13.6 - 21.6 1200 - 3000 83 - 207 1/4" BSP(F)7270.45 4.5 3.0 - 5.0 11.4 - 18.9 2000 - 5000 138 - 345 1/4" BSP(F)7270.55 5.5 3.8 - 6.2 14.4 - 23.5 2000 - 5000 138 - 345 1/4" BSP(F)7270.65 6.5 4.6 - 7.3 17.4 - 27.6 2000 - 5000 138 - 345 1/4" BSP(F)7270.80 8.0 5.6 - 8.9 21.2 - 33.7 2000 - 5000 138 - 345 1/4" BSP(F)7270.90 9.0 6.4 - 10 24.2 - 37.9 2000 - 5000 138 - 345 1/4" BSP(F)
ROTATING NOZZLES (with ceramic insert)
7625.30 3.0 1.6 - 2.9 6.1 - 11 1200 - 3650 83 - 252 1/4" BSP(F)7625.35 3.5 1.9 - 3.3 7.2 - 12.5 1200 - 3650 83 - 252 1/4" BSP(F)7625.40 4.0 2.2 - 3.8 8.3 - 14.4 1200 - 3650 83 - 252 1/4" BSP(F)7625.45 4.5 2.4 - 4.3 9.1 - 16.3 1200 - 3650 83 - 252 1/4" BSP(F)7625.50 5.0 2.8 - 4.8 10.6 - 18.2 1200 - 3650 83 - 252 1/4" BSP(F)7625.55 5.5 3.0 - 5.2 11.4 - 19.7 1200 - 3650 83 - 252 1/4" BSP(F)7625.60 6.0 3.2 - 5.7 12.1 - 21.6 1200 - 3650 83 - 252 1/4" BSP(F)7625.65 6.5 3.6 - 6.2 13.6 - 23.5 1200 - 3650 83 - 252 1/4" BSP(F)7625.70 7.0 3.8 - 6.7 14.4 - 25.4 1200 - 3650 83 - 252 1/4" BSP(F)7625.80 8.0 4.4 - 7.7 16.7 - 29.1 1200 - 3650 83 - 252 1/4" BSP(F)7632.35 3.5 2.8 - 3.9 10.6 - 14.8 2600 - 5100 180 - 350 1/4" BSP(F)7632.40 4.0 3.2 - 4.5 12.1 - 17 2600 - 5100 180 - 350 1/4" BSP(F)7632.45 4.5 3.6 - 5.1 13.6 - 19.3 2600 - 5100 180 - 350 1/4" BSP(F)7632.50 5.0 4.0 - 5.6 15.1 - 21.2 2600 - 5100 180 - 350 1/4" BSP(F)7632.55 5.5 4.4 - 6.2 16.7 - 23.5 2600 - 5100 180 - 350 1/4" BSP(F)7632.60 6.0 4.8 - 6.7 18.2 - 25.4 2600 - 5100 180 - 350 1/4" BSP(F)7632.65 6.5 5.2 - 7.3 19.7 - 27.6 2600 - 5100 180 - 350 1/4" BSP(F)7632.70 7.0 5.6 - 7.9 21.2 - 29.9 2600 - 5100 180 - 350 1/4" BSP(F)
Rotating Nozzles
7625.55
7265.50
14 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Accessories
ModelsFlow Range Pressure Range
Type Portgpm lpm psi bar
FOAMER, WITH AND WITHOUT BOTTLE
32017 2 - 4 7.6 - 15.2 750 - 2900 52 - 200 W/O Bottle 1/4" BSP(F)
39234 2 - 4 7.6 - 15.2 750 - 2900 52 - 200 W/1 Liter Bottle 1/4" BSP(F)
39196 2 - 4 7.6 - 15.2 750 - 2900 52 - 200 W/2 Liter Bottle 1/4" BSP(F)
Foamers
ModelsOrifice Size Flow Range Maximum Pressure Ports
mm gpm lpm psi bar Inlet DischargeBRASS - ADJUSTABLE
7182 1.8 mm 2 - 4 7.6 - 15 3500 241 3/8" NPT(M) 3/8" NPT(M)
7192 1.8 mm 2 - 4 7.6 - 15 3500 241 M18 x 1.0 3/8" NPT(M)
7183 2.1 mm 3 - 5 11.4 - 19 3500 241 3/8" NPT(M) 3/8" NPT(M)
7193 2.1 mm 3 - 5 11.4 - 19 3500 241 M18 x 1.0 3/8" NPT(M)
7184 2.3 mm 3 - 6 11.4 - 23 3500 241 3/8" NPT(M) 3/8" NPT(M)
7194 2.3 mm 3 - 6 11.4 - 23 3500 241 M18 x 1.0 3/8" NPT(M)
7224 2.3 mm 3 - 6 11.4 - 23 3500 241 M22 x 1.5 3/8" NPT(M)
Chemical Injectors
39234
7192
15For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Custom Engineered Power UnitsYou define. We design.
For over 25 years, Cat Pumps has been the industry leader in providing custom-engineered pumping systems to meet a wider range of application needs. By selecting Cat Pumps for your next pumping system, customers eliminate the hassle and expense of designing, multiple source buying, fabrication and testing. The technical sales team assists with proper component selection, as well as installation, operation and maintenance support.
All systems are designed, built and pressure tested in the Cat Pumps Minneapolis location. To begin the quoting process, call the main office at (763) 780-5440 or submit the custom system quote form at catpumps.com.
With thousands of installations running around the world, Cat Pumps is the supplier of choice for custom pumping systems.
Base System design starts with choosing the base that best fits the application. Numerous base configurations are available to meet space, portability, sound and material demands.
• Standard • Vertically Stacked • Enclosed • Multiple Pump
Power Source A qualified technical staff with extensive experience can assist in recommending the correct product for any power source available.
• Electric • Gas • Diesel • Hydraulic • Pneumatic
Drive Package A wide variety of drive packages are available to complement any power source of choice.
• Belt • Direct Drive • Gearbox • Clutch
Accessories Choose from hundreds of high-quality genuine Cat Pumps accessories for optimum system performance and life.
• Regulator • Relief / Pop-off Valve • Pressure Gauge • Pulsation Dampener • Inlet Filter / Strainer • Oil
System Configuration
With extensive experience building thousands of systems, Cat Pumps can help determine the best configuration for any application.
Advanced Control Options
Ask about advanced control options designed to provide maximum system performance as well as system protection. Options include:
• Variable Frequency Drives (VFD)
• PID Loop (varies speed of pump to maintain system pressure)
• Multiple Pump Systems
• Low-Pressure Seal Monitors
• Auto Shutdowns (Temperature and Low Inlet Pressure)
Other control options are available upon request.
16 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
.3400 High Temperature and Run-Dry Capabilities
Ultimate Protection for Pressure Washer Storage
Handles Liquids up to 200° F (93° C) High temperature liquids place extraordinary demands on system components, especially the pump. Premature pump failure can lead to production downtime, added maintenance costs, damaged final product and increased personnel hazards. Cat Pumps high temperature seals can handle liquids up to 200° F (93° C) and perform in intermittent run dry conditions. Pumps are available in a wide variety of flows and pressures handling a variety of applications.
Features and Benefits Applications• Suitable in intermittent run dry conditions.
• Pumps are field proven and designed for continuous duty applications.
• Brass and stainless steel construction to meet application requirements .
• Wide range of drive options include belt, direct, clutch and gearbox drives.
• Pump family ranges from 0.5 – 25 gpm (1.9 – 95.0 lpm) at 100 – 5000 psi (6.9 – 345 bar) meeting a wide range of applications.
• Easy to order, add .3400 to end of pump model number.
• Carpet cleaning
• In-plant cleaning and sanitizing
• Vehicle cleaning
• Conveyor belt cleaning
• Oil rig wash down
• Contractor cleaning
• Hood vent cleaning
• Tank cleaning
Cat Pumps Pressure Washer Pump Protector guards your pressure washer pump during extended storage — there is no better way to protect your pump. Order part number 6208 for a case of six bottles (12 fluid ounces each).
Features:• Excellent winterizer: protects pumps from freezing to -25° F • Lubricates seals, valves and valve seats to prevent sticking • Inhibits corrosion and mineral deposits • Environmentally friendly — 100% biodegradable
Learn more at our YouTube channel at: youtube.com/user/catpumps1968
17For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Cat Pumps Oil – Better than the Rest
Cat Pumps Integral Unloaders are Long Lasting and Easy to Service
Cat Pumps oil is the only lubricant exclusively designed for and thoroughly tested in all models of Cat Pumps. Premium base stocks are the formulation’s “backbone” that provides superior lubricity that protects internal pump components.
Anti-wear additives prolong pump life by protecting internal pump surfaces from metal to metal wear. Cat Pumps hydraulic oil is formulated with premium anti-corrosion additives that offer protection in all operating environments.
Cat Pump oil is readily available in a variety of container sizes through any Cat Pumps distributor or OEM.
Easy to Service
• No special tools required
• Drop-in replacement components for quick service
• Repair kits are preassembled with only four (4) parts
• Repair kits are on-the-shelf for 24-hour shipping
Unloader Valve Maintenance
Pumps with built-in integral unloader valves have a smaller footprint and also reduce potential leak paths. What’s more, the Cat Pumps design is easy to service. No special tools are required and each repair kit is preassembled with only four parts!
Like all Cat Pumps products, kits are in stock for 24-hour shipping.
18 For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Properly maintaining your pressure washer is the key to enjoying years of trouble-free service. Cat Pumps is here to help you all the way. Make the Cat Pumps Pressure Washer Center your go-to resource for pressure washer information.
www.catpumps.com/pressure-washer-center.asp
• Troubleshooting Guide
• Pump Identification
• Long-Term Storage
• Repair Tips
• FAQ’s
Cat Pumps Pressure Washer Center
Online Service and Support Videos
Pressure Washer Center is a new resource available on Cat Pumps website. You can find the link on the top right of the Cat Pumps home page. The Pressure Washer Center contains useful information about pressure washer pumps and systems, such as...
Cat Pumps offers a variety of training and support services to our sales partners and customers. High-pressure systems require special attention to achieve safe and reliable operation. Optimum performance of the pump depends upon the entire system, determined by proper design, component selection, installation, and maintenance of the pump as well as system accessories. With proper design, installation, and care, high-pressure pumps and systems from Cat Pumps can provide thousands of hours of trouble-free service.
Training VideosInformative “Whiteboard Sessions” videos cover a variety of technical topics in short and easy-to-comprehend lessons conducted by Cat Pumps engineering. Find them at these links:
www/catpumps.com/whiteboard-sessions.asp www.catpumps/youtube
Service VideosLearn how to service seal and valve kits in these authorized Cat Pumps videos, hosted on Cat Pumps YouTube channel and website. Find them at these links:
www.catpumps.com/service www.catpumps/youtube
19For more information, contact Cat Pumps at (763) 780-5440 • catpumps.com
Customer Service – Another Cat Pumps Difference
When customers do business with Cat Pumps, they benefit not only from long-lasting dependable products, but also from excellent customer service and support. Cat Pumps customers enjoy the following benefits:
• 99.4% order fill rate, supported by world-class inventory management system
• 99.9% shipping accuracy, which means customers receive what they ordered
• 99.8% of orders ship within 24 hours for fast on-the-job delivery
• Worldwide distribution network stocking genuine Cat Pumps products and parts
• Industry-leading customer service with “live” support, from phone operators to Technical Services
• Experienced staff on call to assist with inquiries, from designing power units to system troubleshooting
• “Account Access” on-line portal provides 24/7 access to registered customers to enter purchase orders, receive up-to-date pricing, and track orders. Contact Cat Pumps for more information.
• Email [email protected] for fast response to questions and requests or call (763) 780-5440
Sales and service support is provided by highly qualified distribution network covering the U.S., Canada, and Mexico. Cat Pumps has an international presence with sales offices in the U.K., Belgium and Germany as well as a worldwide distribution channel.
Pumps and parts are stocked for off-the-shelf delivery. Wherever customers are in the world, Cat Pumps service and support are never far away. Long-lasting products backed by excellent customer service are why Cat Pumps is the best choice for high-pressure pumps and systems.
Complete, Accurate and Fast Order Shipping
CUST
OMER
SERVICE PERFORMANCE
99.9%Shipping AccuracyCU
STOM
ER SE
RVICE PERFORMANCE
99.4%Fill Rates CU
STOM
ER SE
RVICE PERFORMANCE
99.8%On-time Delivery
CAT PUMPS1681 - 94TH LANE N.E. MINNEAPOLIS, MN 55449-4324PHONE (763) 780-5440 — FAX (763) 780-2958e-mail: [email protected]
For International Inquiries go to www.catpumps.com and navigate to the “Contact Us” link. PN 992220 Rev K 7/18
ABOUT CAT PUMPS Proven Quality, Customer FocusedCat Pumps is the world leader in the design, manufacture and marketing of the most dependable high-pressure positive displacement reciprocating triplex pumps and systems in the market. Our mission to exceed customer expectations for quality, reliability, availability, delivery, technical expertise and aftermarket support to assure the best value in all the industries served.
LOCATIONS Worldwide HeadquartersCat Pumps 1681 94th Lane Northeast Minneapolis, MN 55449 USA
P: 763-780-5440 F: 763-780-2958 [email protected] www.catpumps.com
Territories Served U.S., Canada
International DivisionP: 763-780-5440 F: 763-785-4329 [email protected] www.catpumps.com
Territories Served Africa, Asia, Australia, Central and South America, Mexico, Middle East, New Zealand, Turkey
Cat Pump (U.K.) Ltd. 1 Fleet Business Park, Sandy Lane Church Crookham FLEET, Hampshire GU52 8BF England
P: +44 1252 622031 F: +44 1252 626655 [email protected] [email protected] www.catpumps.co.uk
Territories Served U.K. and Ireland
Cat Pumps International N.V. Heiveldekens 6A 2550 Kontich Belgium
P: 32 3 450 71 50 F: 32 3 450 71 51 [email protected] www.catpumps.be
Territories Served Western Europe (except U.K., Germany, and Austria)
Cat Pumps Deutschland GmbH Buchwiesse 2, D-65510 Idstein Germany
P: +49 6126 9303 0 F: +49 6126 9303 33 [email protected] www.catpumps.de
Territories Served Austria, Commonwealth of Independent States (CIS), Germany and Eastern Europe
SALES, DISTRIBUTION, SERVICE
Call today for product and application assistance. 763-780-5440 or visit us at www.catpumps.com
