Performance Products

www.huntsman.com/performance_products

AdditivesAsphalt, Construction, Gypsum

Asia Pacific Region

Product Name Description Features 1 Dosage

CONCRETE ADDITIVES

BUILDING BLOCK FOR POLYCARBOXYLATE DISPERSANT

DEHSCOFIX® PN-220Nominal 2000 molecular weight polyetheramine with a EO/PO ratio of about 70/30

Used as chemical intermediate or building block for Polycarboxylate dispersant.

-

NAPTHALENE SULFONATE FORMALDEHYDE CONDENSATE (NSF) DISPERSANT

DEHSCOFIX® 108Sodium salt of NSF in liquid form (40% solid)

The latest state of NSF technology to improve the properties of fresh and hardened concrete.

• Reduces the water demand of a concrete mix without reducing workability, allowing greatly increased early and ultimate strengths without additional cement.

• Improves the workability of concrete without increasing water demand.

• Produces economic benefits to the concrete mix design through reducing amount of cement and water without sacrificing workability and strength of concrete.

• Increases productivity, resulting in reduced labour costs

0.5 to 2.0% by weight of cement

DEHSCOFIX® 158 Sodium salt of NSF in powder form

DEHSCOFIX® 101Calcium salt of NSF in liquid form (40% solid)

DEHSCOFIX® 151 Calcium salt of NSF in powder form

DEFOAMERS

JEFFAMINE® M2005Nominal 2000 molecular weight polyetheramine with a EO/PO ratio of about 5/95

Effective for high-temperature climates, compatible with superplasticizers and defoamer based on EO/PO mixed copolymer.

0.5 to 2.0% by volume for 40% active PCE

EMPILAN® PF 7168 EO/PO mixed copolymer

Effective defoamers in reducing air content of concrete.TERIC® 168 EO/PO mixed copolymer

SURFONIC® LF-68 EO/PO block copolymer

JEFFOX® WL660 EO/PO mixed copolymerEffective defoamer in maintaining air content for use in conjunction with Polycarboxylate superplasticizer for concrete application. Effective water soluble defoamer for maintaining air content with additional features in reducing stickiness of concrete and in enhancing concrete surface finish.

2.0 to 4.0% by volume for 40% active Polycarboxylate dispersantJEFFOX® WL5000 EO/PO mixed copolymer

ACCELERATORS AND STRENGTH ENHANCER ADDITIVES

SURFONIC® EDA-4/80 amines

THEED (Tetra hydroxyethyl ethylene diamine)

Provide water reduction up to 8% with normal set time. Increase early and final strength development in concrete.

0.01 to 0.05% by weight of cement

TEA TriethanolamineEnhance early hydration of cement, hence increasing early strength development in concrete.

TIPA TriisopropanolamineImprove compressive strength of concrete at late ages for cement more than 4% C4AF. The strength gain is more pronounced with coarser cement.

MDEA MethyldiethanolamineSpeed up drying and increase early strength development in concrete.

ConstructionHuntsman Performance Products is a global leader in intermediate chemicals essential to producing specialized end products, with emphasis on superplasticizer cement dispersants that improve flow and workability of concrete or mortar. More than a supplier, Huntsman offers direct benefits through both synthesis-based and application research, manufacturing efficiencies and personalized technical support.

1 Features are for reference only. Please approach Huntsman for actual specifications.

1 Features are for reference only. Please approach Huntsman for actual specifications.

Product Name Description Features 1 Dosage

AIR ENTRAINING AGENTS

NANSA® LSS 38/ASAqueous solution of sodium C14-16 α-olefin sulphonate

Provides excellent foaming and detergency properties to a broad spectrum of formulations. Increase freeze/thaw resistance.

0.01 to 0.1% by weight of cement

EMPILAN® 2502 Coco diethanolamideExcellent co-surfactant for foaming agent to improve compressive strength, while maintaining foam volume and foam distribution.

EMPICOL® ESC 3/ZSodium lauryl ether (3EO) sulfate based on a narrow cut primary natural alcohol

Provides excellent foaming and detergency properties to a broad spectrum of formulations. Increase freeze/thaw resistance.

SHRINKAGE REDUCING AGENTS

JEFFAMINE® D-230polyetheramine

Polyether diamine with an average molecular weight of about 230

Enhance inhibition of drying shrinkage of cement compositions while providing desired compressive strength of the fully set composition.

1 to 3% by weight of cement

Butyl di-GLYSOLV® Glycol etherReduces concrete cracking due to shrinking (especially on high strength concrete with low w/c ratio)

2 to 4% by weight of cement

MOULD RELEASE AGENTS

DEHSCOFIX® CO95 Castor oil ethoxylates (HLB = 9.5)Emulsifier components for vegetable oils, based on natural feedstock.

10 to 90% of emulsifier blend

DEHSCOFIX® CO125 Castor oil ethoxylates (HLB = 12.5)Emulsifier components for vegetable oils, based on natural feedstock.

EMPILAN® KLA6 Cetyl oleyl alcohol ethoxylatesEmulsifier components for mineral oils, based on natural feedstock.

EMPILAN® KBE3 C12-14 alcohol ethoylatesEmulsifier components for mineral oils, based on natural feedstock

NANSA® EVM 70/2E Calcium dodecyl benzene sulphonate Emulsifier components for mineral oils.

SURFONIC® MW 100 Formulated castor oil ethoxylatesEmulsifier components for vegetable oils, based on natural feedstock.

CEMENT ADDITIVES

TERIC® 421 Formulated blendReady to use cement grinding aids to improve grinding efficiency and improve strength development in concrete

0.01 to 0.05% by weight of cement

SURFONIC® EDA-4/80 amines

THEED (Tetra hydroxyethyl ethylene diamine)

Provide water reducer up to 8% with normal set time. Increase early and final strength development in concrete.

TEA TriethanolamineEnhance early hydration of cement, hence increasing early strength development in concrete.

TIPA TriisopropanolamineImprove compressive strength of concrete at late ages for cement more than 4% C4AF. The strength gain is more pronounced with coarser cement

MDEA MethyldiethanolamineSpeed up drying and increase early strength development in concrete

1 Features are for reference only. Please approach Huntsman for actual specifications.

Product Name Description Features 1 Dosage

MORTAR AND PLASTER ADDITIVES

AIR ENTRAINING AGENTS

NANSA® HS 80/SDried powder sodium dodecyl benzene sulphonate

Air entraining agent for limited introduction of air.

0.05 to 0.03% by weight of cement

NANSA® LSS 495/HDried powder sodium alpha olefin sulphonate

Provides excellent foaming and detergency properties to a broad spectrum of formulations.

EMPICOL® LX/A Dried powder sodium alkyl sulphateAir entrainment improves workability and helps produce dense, uniform, and close textured surface.

EMPICOL® 0045/B Dried powder sodium alkyl sulphateA highly active air entraining agent for spontaneous introduction of the smallest bubbles.

SUPERPLASTICIZERS

DEHSCOFIX® 158 Sodium salts of Napthalene Sulphonate Formaldehyde Condensate (NSF) in powder form

A mortar containing superplasticisers requires less water than usual to get the same consitency, hence improve mortar strength.

0.1 - 0.5% by weight of cementDEHSCOFIX® 161

CO-ADDITIVE FOR EFFLORESCENCE RESISTANCE

ELTESOL® SX93 Sodium aromatic sulphonate powder

Increase solubility of formulation containing calcium stearate, hence producing lower adsorption, increasing water repellency of the mixtures and better overall appearance.

5 to 15% in calcium stearate formulation

WETTING AGENTS

EMPILAN® KM 25/PWFatty alcohol ethoxylates

Enhance wetting and binding ability of cement surface to enhance workability over time for mortar and plaster application

0.1 to 1.0% by weight of cementEMPILAN® KM 50/PW

ADDITIVES FOR TUNNELING UNDERGROUND

FOAMING AGENTS

EMPICOL® ESB 3/MX Sodium alkyl ether sulphate Excellent foaming agent for soil conditioning formulations used in EPB machine to prevent clogging of cutting disc and helps to maintain bored face.

0.1 to 2.0 kg/m3

NANSA® LSS38/AS Sodium alpha olefin sulphonate

EMPICOL® 0758 Sodium C10 alkyl sulphateImprove foam stability with enhanced lubrication

EMPILAN® 2502 Coco diethanolamide

EMPIGEN® BS/FE Cocoamidopropyl betaineExcellent foaming properties and good compatibility with dissolved salts in solutions.

EMPICOL® XCT 10 Formulated blendExcellent foaming agent for soil conditioning formulations used in EPB machine to prevent clogging of cutting disc and helps to maintain bored face.

ANTI CLAY AGENTS

JEFFAMINE® polyetheramine series

Contain primary amino groups attached to the end of a polyether backbone based on either propylene oxide (PO), ethylene oxide (EO), or mixed PO/EO.

Can be used in clay additives formulations to support anti-clogging and anti-adhesion properties of the foam.

-

Product Name Description Features 1 Dosage

ASPHALT / BITUMEN

CHEMICAL INTERMEDIATE FOR ADHESION PROMOTER AND CATIONIC EMULSIFIER

Aminoethylpiperazine (AEP)

NNH2NH

Chemical intermediate for bitumen antistripping agents to increase the adhesion (active and passive) between the aggregate surface (hydrophilic) and the bitumen surface (hydrophobic) in the manufacture of bituminous mixtures.

-

Triethylenetetramine (TETA) NH2

NH

NH

NH2

Tetraethylenepentamine (TEPA) NH2

NH

NH

NH

NH2

ETHYLENEAMINE EA-300

Mixture of tetraethylenepentamine and higher molecular weight ethyleneamine products

ADHESION PROMOTER

EMPIPHOS® O3/D Oleyl ethoxylate phosphate ester

Highly stable antistripping agent for increasing adhesion between asphalt and aggregates. It has been specifically designed for use in the manufacture of high performance emulsions, cutbacks and hot mix. It may be used in polymer asphalt systems.

0.1 to 1.0% by weight of bitumen

FOAMING AGENT FOR BITUMEN

TERIC® 311 Blended productBitumen foaming agent for road repair. To be used with specialized foam stabilization machinery.

0.5 to 2.5% by weight of bitumen

AMPHOTERIC EMULSIFIER

EMPIGEN® BB Alkyl betaines Creates stable bitumen emulsion in low temperatures, can be applied with cold and damp aggregates.

0.5 to 2.5% by weight of bitumenEMPIGEN® BS/FE Cocoamido propyl betaine

NONIONIC EMULSIFIER

SURFONIC® NB-557 High active nonyl phenol ethoxylatesCreates stable bitumen emulsion in low temperatures, can be applied with cold and damp aggregates.

0.5 to 2.5% by weight of bitumen

GYPSUM PLASTERBOARD

GYPSUM GRINDING AIDS

NANSA® HS80/sDried powder sodium dodecyl benzene sulphonate

Improve wetting and grinding efficiency prior to calcination.

0.01% to 0.25% by weight of gypsum

FLUIDIZERS

MILLIFLUID® CAqueous solution of Naphthalene sulphonate formaldehyde condensate (NSF)

Prevents agglomeration of gypsum particles and reduces energy consumption by reducing high levels of water.

0.1 to 1.0% by weight of gypsum

FOAMING AGENTS

MILLIFOAM® D Formulated blend of ammonium alkyl ether sulphate Avoids areas of weakness and increased-strength board by creating and stabilizing small air bubbles.

0.005% to 0.1% by weight of gypsumMILLIFOAM® H Formulated blend of sodium alkyl ether sulphate

Asphalt and Gypsum

1 Features are for reference only. Please approach Huntsman for actual specifications.

AmericasHuntsman Corporation 10003 Woodloch Forest DriveThe Woodlands, Texas, 77380USATel : +1-281-719-6000Fax : +1-281-719-6055

Asia PacificHuntsman Performance Products 150 Beach Road#37-00 Gateway WestSingapore 189720Tel : +65-6297-3363Fax : +65-6296-3368

Europe, Africa and Middle EastHuntsman Performance Products Everslaan 45 B-3078 EverbergBelgiumTel : +32-2-758-9544Fax : +32-2-758-9946

DisclaimerHuntsman Corporation warrants only that its products meet the specifications stated in the sales contract. Typical properties, where stated, are to be considered as representative of current production and should not be treated as specifications. While all the information presented in this document is believed to be reliable and to represent the best available data on these products, HUNTSMAN MAKES NO WARRANTY OR GUARANTEE OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF ANY THIRD PARTY, OR WARRANTIES AS TO QUALITY OR CORRESPONDENCE WITH PRIOR DESCRIPTION OR SAMPLE, AND ANY USER OF PRODUCTS DESCRIBED HEREIN SHOULD CONDUCT A SUFFICIENT INVESTIGATION TO ESTABLISH THE SUITABILITY OF ANY PRODUCT FOR ITS INTENDED USE AND ASSUMES ALL RISK AND LIABILITY WHATSOEVER RESULTING FROM THE USE OF SUCH PRODUCT, WHETHER USED SINGLY OR IN COMBINATION WITH OTHER SUBSTANCES. Products may be toxic and require special precautions in handling. For all products described herein, the user should obtain detailed information on toxicity, together with proper shipping, handling, and storage procedures, and should comply with all applicable safety and environmental standards. The behavior, hazards and/or toxicity of the products referred to in this publication in manufacturing processes and their suitability in any given end-use environment are dependent upon various conditions such as chemical compatibility, temperature, and other variables, which may not be known to Huntsman. It is the sole responsibility of the user of such products to evaluate the manufacturing circumstances and the final products under actual end-use requirements and to adequately advise and warn future purchasers and users thereof.

DEHSCOFIX, ELTESOL, EMPICOL, EMPIGEN, EMPILAN, GLYSOL, JEFFAMINE, JEFFOX, NANSA, SURFONIC and TERIC are registered trademark of Huntsman Corporation or an affiliate thereof in one or more, but not all, countries.

Copyright © 2013 Huntsman Corporation or an affiliate thereof. All rights reserved.

Asia Pacific Sales Offices

Australia New Zealand 61 Market Road P. O. Box 107 083Brooklyn, Airport OaksVictoria 3012, Australia Auckland 2022, New ZealandTel : +61-3-9933-6696 Tel : +64-9-275-8902Fax : +61-3-9933-6656 Fax : +64-9-275-8943

China TaiwanSuites 4907-08 No. 19 49th Floor Maxdo Centre Industrial Third Road8 Xing Yi Road Kuan Yin Industrial DistrictShanghai 200336, P. R. China Taoyuan, Taiwan Tel : +86-21-2325-7988 Tel : +886-3-483-8616Fax : +86-21-2325-7908 Fax : +886-3-483-6412

Singapore (SEA) India150 Beach Road Research & Application House#37-00 Tex Centre, E -Wing, Saki VillageGateway West Chandivali Farm Road, Andheri (East)Singapore 189720 Mumbai 400 072, IndiaTel : +65-6297-3363 Tel : +91-22-4050-6565Fax : +65-6296-3368 Fax : +91-22-4050-6300

Japan Korea6th Floor, 5-5-2 9th Floor, Dukmyung BuildingKIBC South Building 170-9 Samsung-dongMinatojima Minamimachi, Chuo-ku Gangnam-guKobe 650-0047, Japan Seoul, KoreaTel : +81-78-304-3900 Tel : +82-2-3404-6800Fax : +81-78-304-3970 Fax : +82-2-556-3263

Construction

Huntsman Performance Products supports manufacturing and marketing efforts within the construction chemical industry. We focus on joint developments with our customers to solve R&D issues and manufacturing challenges. The innovations that arise from this work include building blocks for polycarboxylate dispersants, defoamers, accelerators, air entrainers and shrinkage reducing agents.

Asphalt

As a global provider of intermediate chemicals, Huntsman Performance Products supplies ethylenamines to the asphalt industries for asphalt emulsifier and adhesion promoters. We also provide tolling services, which allow our customers to order and take delivery of predetermined chemistry shipments, whenever and wherever they want them.

Gypsum plasterboard

MILLIFOAM® and MILLIFLUID® are the respective trade names for our gypsum foaming agents and fluidizers. Our expertise and resources allow the development of these systems to suit production, drying times and other economic, performance and aesthetic considerations.