Aliva®-304 Shotcrete manipulator Durable pivot bearing and 10m range The rotation of the Aliva®-304 spray arm is hydraulically controlled by two gear racks. This design is very robust. With three extensions the telescopic boom has a reach of up to 10m. Customisable Where space is limited, the height of the column can be reduced according to customer requirements. Optionally we supply a hydraulic power pack with control cabinet or the complete assembly set with a rotor machine or concrete pump. For mines and small tunnels The Aliva®-304 telescopic spraying arm is suitable for mines and tunnels. Shotcrete can be applied quickly, efficiently and safely. The standard version is supplied with cable remote control and LED headlights.
Transcript
Aliva®-304 Shotcrete manipulator
Durable pivot bearing and 10m range The rotation of the Aliva®-304 spray arm is hydraulically controlled by two gear racks. This design is very robust. With three extensions the telescopic boom has a reach of up to 10m.
Customisable Where space is limited, the height of the column can be reduced according to customer requirements. Optionally we supply a hydraulic power pack with control cabinet or the complete assembly set with a rotor machine or concrete pump.
For mines and small tunnels The Aliva®-304 telescopic spraying arm is suitable for mines and tunnels. Shotcrete can be applied quickly, efficiently and safely. The standard version is supplied with cable remote control and LED headlights.
BENEFITS Simple construction Simple operation Easy maintenance Up to DN80 pump hose
STANDARD EQUIPMENT Cable remote control (15m Cable)
LED headlight Valve block
OPTIONS Control cabinet & hydraulic power pack Radio remote control Further accessories like Converto Robospray, additive/air hoses etc. see Aliva® Converto spare parts catalogue
WORKING AREAAliva®-302.1 on Aliva®-520
Type of drive Hydraulic
Max. oil pressure 210 bar ±5 bar
Required oil flow min.38 l/minmax.50 l/min
Required power 11 kW
Boom extension 4 m
Pivoting range 360°
Raise / lower range +67° / -44°
Rotation Sprayhead
Axial 360°
Radial 240°
Nozzle rotation
Transport dimension
lenght 3100 mm
height 2050 mm
width 1250 mm
Weight 860 kg
Prior to use or processing, always consult the current product data sheet of the products used. The current version of our respective General Terms and Conditions applies.
