SECTION 07 46 33
VINYL SIDING AND SOFFITS
Display hidden notes to specifier. (Don't know how? Click
Here)
Copyright 2002 - 2005 ARCAT, Inc. - All rights reserved
** NOTE TO SPECIFIER ** Alside, Inc., vinyl (polyvinyl chloride)
siding and soffits. . This section is based on the products of
Alside Division of Associated Materials Incorporated, which is
located at: 3773 State Road Cuyahoga Falls, OH 44223 Tel: (800)
257-4335 Fax (330) 922-5387 Email: [email protected]; Web:
www.alside.com [ Click Here ] for additional information. . Alside
introduced the first low-maintenance siding for residential use in
the late 1940s. Since then it has expanded its line to include a
wide array of steel, aluminum, and premium vinyl sidings and
accessories. The company also makes minimum maintenance windows and
other quality products for home and commercial use. This section
covers only their premium vinyl sidings, soffits, trim, and
accessories.
See our SpecWizard: Click Here
PART 1 GENERAL
1.1 SECTION INCLUDES
** NOTE TO SPECIFIER ** Delete items below not required for
project.
A. Vinyl siding.
B. Polypropylene siding
C. Vinyl soffits.
D. Vinyl trim and accessories.
1.2 RELATED SECTIONS
** NOTE TO SPECIFIER ** Delete any sections below not relevant
to this project; add others as required.
A. Section 06 10 00 - Rough Carpentry: Framing and
sheathing.
B. Section 07 90 00 - Joint Protection.
1.3 REFERENCES
** NOTE TO SPECIFIER ** Delete references from the list below
that are not actually required by the text of the edited
section.
A. ASTM D 256 - Test Method for Determining the Pendulum Impact
Resistance of Notched Specimens of Plastics.
B. ASTM D 635 - Test Method for Rate of Burning and/or Extent
and Time of Burning of Self-Supported Plastics in a Horizontal
Position.
C. ASTM D 638 - Test Method for Tensile Properties of
Plastics.
D. ASTM D 648 - Test Method for Deflection Temperature of
Plastics Under Flexural Load.
E. ASTM D 696 - Test Method for Coefficient of Linear Expansion
of Plastics.
F. ASTM D 1929 - Test Method for Ignition Properties of
Plastics.
G. ASTM D 2843 - Test Method for Density of Smoke from the
Burning or Decomposition of Plastics.
H. ASTM D 3679 - Specification for Rigid Poly Vinyl Chloride
(PVC) Siding.
I. ASTM D 4226 - Test Methods for Impact Resistance of Rigid
Poly Vinyl Chloride (PVC) Building Products.
J. ASTM E 84 - Test Method for Surface Burning Characteristics
of Building Materials.
1.4 SUBMITTALS
A. Submit under provisions of Section 01 30 00.
** NOTE TO SPECIFIER ** Delete the following paragraph if
samples are not required.
B. Samples: Siding/soffit design, size, and color for
approval.
C. Manufacturer's installation instructions.
D. Certificate: Manufacturer's certification that siding/soffit
as supplied meets or exceeds the conditions specified herein.
1.5 QUALITY ASSURANCE
A. Manufacturer: Maintain rigorous production quality control
standards to ensure that vinyl siding and soffit will perform as
expected for its intended use.
B. Regulatory Requirements:
** NOTE TO SPECIFIER ** Delete requirements below that do not
apply to the project. Add others as required.
1. National Building Code - BOCA Research No. 93-42.
2. Standard Building Code - SBCCI Compliance Report No.
9632.
3. Uniform Building Code - ICBO Evaluation Report No. 3663.
4. HUD-FHA Minimum Property Standards.
5. Dade County Florida Acceptance No. 03-1105.05.
6. Texas Department of Insurance Evaluation EC-3.
7. Underwriters Laboratories Listing R14214.
8. State of Florida Product Approval - FL12103 and 12143.
9. NYC Department of Buildings, Materials and Equipment
Acceptance (MEA).
10. ICC - ESR-1258, ESR 1133.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Store products in manufacturer's unopened packaging until
ready for installation.
B. Pack siding and soffits two squares per carton and clearly
mark each carton with manufacturer's name, siding style, color,
identifying lot number, and VSI Certification Stamp.
C. Store vinyl siding, soffits, and accessories in clean, dry
area, out of direct sunlight.
D. Handle material to prevent damage. Do not allow cartons to
crease.
** NOTE TO SPECIFIER ** Delete the following article if no
warranties are required, or if work is covered under the terms of a
general project warranty specified elsewhere. You may edit the
article to obtain a warranty from the Contractor only, or to suit
other project-specific criteria.
1.7 WARRANTY
A. Upon completion, provide a written transferable, lifetime
limited warranty.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Alside / Siding, which is located
at: P. O. Box 2010 ; Akron, OH 44309; Toll Free Tel: 800-922-6009;
Tel: 330-922-5350; Fax: 330-922-5387; Email: [email protected];
Web: www.alside.com
** NOTE TO SPECIFIER ** Delete one of the following two
paragraphs; coordinate with requirements of Division 1 section on
product options and substitutions.
B. Substitutions:Not permitted.
C. Requests for substitutions will be considered in accordance
with provisions of Section 01 60 00.
2.2 MATERIALS
A. Vinyl Siding and Soffits - General Requirements: Produced
from polyvinyl chloride (PVC) compounds meeting ASTM D 3679
requirements for compound class number 2.
1. Vinyl Siding Institute Certified.
2. Average Impact Strength: 3.86 ft. lbs./in. (26.61 kPa) of
notch at 73.4 degrees F (23 degrees C), per ASTM D 256.
3. Average Impact Strength: 2.4 ft. lbs./in. (16.55 kPa) of
notch at 32 degrees F (0 degrees C), per ASTM D 256.
4. Tensile Strength: 6,700 psi (46,195 kPa), per ASTM D 638.
5. Modulus of Elasticity: 410,000 psi (2,826,850 kPa), per ASTM
D 638.
6. Deflection Temperature: 170 degrees F (77 degrees C), per
ASTM D 648.
7. Fire Properties:
a. Average Time of Burning: Less than 5 seconds, when tested in
accordance with ASTM D 635.
b. Average Extent of Burning: Less than 5 mm, when tested in
accordance with ASTM D 635.
c. Flame Spread Index: 20 (Class A), when tested in accordance
with ASTM E 84.
d. Smoke Developed Index: Less than 450, when tested in
accordance with ASTM E 84.
e. Ignition Temperature: When tested in accordance with ASTM D
1929, no self ignition and no flaming; no smoldering at less than
680 degrees F (360 degrees C).
8. Typical Vinyl Siding Properties:
a. Camber: Alside sidings and soffits meet all requirements for
camber per ASTM D 3679.
b. Heat Shrinkage: Alside sidings and soffits meet all
requirements for heat shrinkage per ASTM D 3679.
c. Impact Resistance:60 in-lbf, per ASTM D 4226, Procedure A,
H.25.
d. Weatherability: No surface or structural defects such as
peeling, cracking, or chipping when tested per ASTM D 3679.
e. Coefficient of Linear Expansion: 3.05 by 10-5 in/in F, per
ASTM D 696.
f. Gloss: Alside sidings and soffits meet all requirements .
g. Surface Distortion: No distortion at 120 degrees F (40.5
degrees C), per ASTM D 3679.
9. Interlock: Post-form style lock with positive interlock; both
ends of panels factory cut and notched for overlap.
10. Nail Slots: Elongated 1-inch (25 mm) slots spaced
approximately 1/4 inch (6 mm) apart in nailing hem to allow for
expansion and contraction.
11. Weep Holes: Small holes under the bottom butt of siding
panels to prevent vapor build-up and allow accumulated moisture to
escape.
B. Polypropylene Siding Properties
1. Tensile Strength: 2900 psi @ yield, per ASTM D 638
2. Windload: 160 mph, per ASTM 5206
3. Flextural Modulus: 190,000 psi, per ASTM D 790
4. Flextural Strength: 4,800 psi, per ASTM D 790
5. Notched Izod Impact: 2.0 ft-lbs/in @23 degrees C, per ASTM
D256
6. Gardner Impact: 180 in-lbs @ 23 degrees C, per ASTM D
5420
7. Burn Rate: Horizontal Burn Classified 11.66 MM/Minute, per
ASTM D 635
8. Optical Density of Smoke: 240.4, per ASTM E 662
2.3 SIDING
A. Vinyl Siding: Charter Oak double 4-1/2 inch (114 mm)
clapboard.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the clapboard style
with 3/4 inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red-with BASF additives and modifiers for fade
protection
p. Heather-with BASF additives and modifiers for fade
protection
q. Ivy-with BASF additives and modifiers for fade protection
r. Slate-with BASF additives and modifiers for fade
protection
s. Harbor Blue-with BASF additives and modifiers for fade
protection.
t. Walnut-with BASF additives and modifiers for fade
protection
B. Vinyl Siding: Charter Oak double 4-1/2 inch (114 mm) dutch
lap.
1. 4-1/2 inch (114 mm) dutch lap profile.
2. Each 9-inch wide horizontal siding panel nominally configured
as two 4-1/2 inch (114 mm) panels in the dutch lap style with 3/4
inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness:0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red-with BASF additives and modifiers for fade
protection
p. Heather-with BASF additives and modifiers for fade
protection
q. Ivy-with BASF additives and modifiers for fade protection
r. Slate-with BASF additives and modifiers for fade
protection
s. Harbor Blue-with BASF additives and modifiers for fade
protection.
t. Walnut-with BASF additives and modifiers for fade
protection
** NOTE TO SPECIFIER ** Select siding style from the paragraphs
below. Delete those not required.
C. Vinyl Siding: Charter Oak double 4-1/2 inch (114 mm)
clapboard, matte finish.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the clapboard style
with 3/4 inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Heather-with BASF additives and modifiers for fade
protection
p. Slate-with BASF additives and modifiers for fade
protection
D. Vinyl Siding: Charter Oak double 4-1/2 inch (114 mm) dutch
lap, matte finish.
1. 4-1/2 inch (114 mm) dutch lap profile.
2. Each 9-inch wide horizontal siding panel nominally configured
as two 4-1/2 inch (114 mm) panels in the dutch lap style with 3/4
inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Heather-with BASF additives and modifiers for fade
protection
p. Slate-with BASF additives and modifiers for fade
protection
E. Vinyl Siding: Charter Oak XL double 4-1/2 inch (114 mm)
clapboard.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9-inch wide horizontal siding panel nominally configured
as two 4-1/2 inch (114 mm) panels in the clapboard style with 3/4
inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 16 feet 8 inches (5.10 m).
5. Width:9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red-with BASF additives and modifiers for fade
protection
p. Heather-with BASF additives and modifiers for fade
protection
q. Ivy-with BASF additives and modifiers for fade protection
r. Slate-with BASF additives and modifiers for fade
protection
s. Harbor Blue-with BASF additives and modifiers for fade
protection.
t. Walnut-with BASF additives and modifiers for fade
protection
F. Vinyl Siding: Charter Oak XL double 4-1/2 inch (114 mm) dutch
lap.
1. 4-1/2 inch (114 mm) dutch lap profile.
2. Each 9-inch wide horizontal siding panel nominally configured
as two 4-1/2 inch (114 mm) panels in the dutch lap style with 3/4
inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 16 feet 8 inches (5.10 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red-with BASF additives and modifiers for fade
protection
p. Heather-with BASF additives and modifiers for fade
protection
q. Ivy-with BASF additives and modifiers for fade protection
r. Slate-with BASF additives and modifiers for fade
protection
s. Harbor Blue-with BASF additives and modifiers for fade
protection.
t. Walnut-with BASF additives and modifiers for fade
protection
G. Vinyl Siding: Charter Oak XXL double 4-1/2 inch (114 mm)
clapboard.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9 inch wide horizontal siding panel nominally configured
as two 4-1/2 inch (114 mm) panels in the clapboard style with 3/4
inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 25 feet (7.60 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red-with BASF additives and modifiers for fade
protection
p. Heather-with BASF additives and modifiers for fade
protection
q. Ivy-with BASF additives and modifiers for fade protection
r. Slate-with BASF additives and modifiers for fade
protection
s. Harbor Blue-with BASF additives and modifiers for fade
protection.
t. Walnut-with BASF additives and modifiers for fade
protection
H. Vinyl Siding: Charter Oak XXL double 4-1/2 inch (114 mm)
dutch lap.
1. 4-1/2 inch (114 mm) dutch lap profile.
2. Each 9 inch wide horizontal siding panel nominally configured
as two 4-1/2 inch (114 mm) panels in the dutch lap style with 3/4
inch (19 mm) butt height.
3. TriBeam panel reinforcement system with double thick rolled
over nail hem.
4. Length: 25 feet (7.60 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red-with BASF additives and modifiers for fade
protection
p. Heather-with BASF additives and modifiers for fade
protection
q. Ivy-with BASF additives and modifiers for fade protection
r. Slate-with BASF additives and modifiers for fade
protection
s. Harbor Blue-with BASF additives and modifiers for fade
protection
t. Walnut-with BASF additives and modifiers for fade
protection
I. Vinyl Siding: Prodigy double 6 inch (152 mm) clapboard.
1. 6 inch (152 mm) clapboard profile
2. Each 12 inch (305 mm) wide horizontal siding panel nominally
configured as two 6 inch (152 mm) panels in clapboard style with
3/4 inch 19 mm) butt height.
3. Stack lock system with double thick rolled over nail hem and
1-1/2 inch (38 mm) thick friction fit EPS foam.
4. Length: 16 feet 8 inches (5.10 M).
5. Width: 12 inches (305 mm).
6. Thickness: 0.046 inch (.117 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standard.
8. Color shall be as follows:
a. Glacier White.
b. Antique Parchment.
c. Natural Linen.
d. Platinum Gray.
e. Silver Moss.
f. Coastal Sage.
g. Cape Cod Gray.
h. Mystic Blue.
i. Adobe Cream.
j. Colonial Ivory.
k. Maple.
l. Monterey Sand.
m. Vintage Wicker.
n. Tuscan Clay.
o. Autumn Red.
p. Somerset Wheat.
q. Canyon Drift.
r. English Saddle.
s. Deep Moss.
t. Midnight Blue.
u. Charcoal Smoke.
J. Vinyl Siding: Prodigy double 5 inch (152 mm) dutch lap.
1. 5 inch (127 mm) clapboard profile
2. Each 10 inch (254 mm) wide horizontal siding panel nominally
configured as two 5 inch (152 mm) panels in dutch lap style with
3/4 inch 19 mm) butt height.
3. Stack lock system with double thick rolled over nail hem and
1-1/2 inch (38 mm) thick friction fit EPS foam.
4. Length: 16 feet 8 inches (5.10 M).
5. Width: 10 inches (254 mm).
6. Thickness: 0.046 inch (.117 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standard.
8. Color shall be as follows:
a. Glacier White.
b. Antique Parchment.
c. Natural Linen.
d. Platinum Gray.
e. Silver Moss.
f. Coastal Sage.
g. Cape Cod Gray.
h. Mystic Blue.
i. Adobe Cream.
j. Colonial Ivory.
k. Maple.
l. Monterey Sand.
m. Vintage Wicker.
n. Tuscan Clay.
o. Autumn Red.
p. Somerset Wheat.
q. Canyon Drift.
r. English Saddle.
s. Deep Moss.
t. Midnight Blue.
u. Charcoal Smoke.
K. Vinyl Siding: Prodigy single 7 inch (152 mm) dutch lap.
1. 7 inch (178 mm) clapboard profile
2. Each 7 inch (178 mm) wide horizontal siding panel nominally
configured as one 7 inch (178 mm) panel in clapboard lap style with
3/4 inch 19 mm) butt height.
3. Stack lock system with double thick rolled over nail hem and
1-1/8 inch (28.6 mm) thick friction fit EPS foam.
4. Length: 16 feet 8 inches (5.10 M).
5. Width: 7 inches (178 mm).
6. Thickness: 0.046 inch (.117 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standard.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red
p. Somerset Wheat
q. Deep Moss
L. Vinyl Siding: Board and Batten 7 inch (178 mm) vertical
siding.
1. Length: 10 feet (3.05 m).
2. Width: 7 inches (178 mm); configured as 5-1/2 inch (140 mm)
board width and 1-1/2 inch (38 mm) batten width.
3. Thickness: 0.050 inch (.127 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
4. Color: As selected by Architect from manufacturers
standards.
5. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Coastal Sage
f. Cape Cod Gray
g. Mystic Blue
h. Colonial Ivory
i. Maple
j. Monterey Sand
k. Vintage Wicker
l. Tuscan Clay
M. Vinyl Siding: Williamsport Colonial 6-1/2 inch (165 mm)
Beaded Brand.
1. 6-1/2 inch (165 mm) beaded profile.
2. Each 6-1/2-inch (165 mm) wide horizontal siding panel
nominally configured as one panel in the beaded style with 3/4 inch
butt height.
3. Length: 12 feet 4 inches (3.76 m).
4. Width:6-1/2 inches (165 mm).
5. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Colonial Ivory
j. Maple
k. Monterey Sand
l. Vintage Wicker
m. Tuscan Clay
N. Vinyl Siding: Cypress Creek Variegated Siding double 4 inch
(102 mm) clapboard.
1. 4 inch (102 mm) clapboard profile.
2. Each 8-inch (204 mm) wide horizontal siding panel nominally
configured as two 4 inch (102 mm) panels in the clapboard
style.
3. Staggered double nail slots with double thick rolled over
nail hem.
4. Length: 12 feet 6 inch (3.81 m).
5. Width:8 inches (204 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Colonial Ivory
j. Maple
k. Monterey Sand
l. Vintage Wicker
m. Tuscan Clay
O. Vinyl Siding Cypress Creek Variegated Siding double 5 inch
(127 mm) clapboard.
1. 5 inch (127 mm) clapboard profile.
2. Each 10-inch (254 mm) wide horizontal siding panel nominally
configured as two 5 inch (127 mm) panels in the clapboard style
with 5/8 inch (15.8 mm) butt height.
3. Staggered double nail slots with double thick rolled over
nail hem.
4. Length: 12 feet (3.68 m).
5. Width: 10-inch (254 mm).
6. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Colonial Ivory
j. Maple
k. Monterey Sand
l. Vintage Wicker
m. Tuscan Clay
P. Vinyl Siding: Cypress Creek Variegated Siding double 5 inch
(127 mm) dutch lap.
1. 5 inch dutch lap profile.
2. Each 10 inch wide horizontal siding panel nominally
configured as two 5 inch (127 mm) panels in the dutch lap
style.
3. Length: 12 feet (3.66 m)
4. Width 10 inches (254 mm).
5. Thickness: 0.046 inch (0.12 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Colonial Ivory
j. Maple
k. Monterey Sand
l. Vintage Wicker
m. Tuscan Clay
Q. Vinyl Siding: Cypress Creek Variegated Board and Batten 7
inch (178 mm) vertical siding.
1. Length: 10 feet (3.05 m).
2. Width: 7 inches (178 mm); configured as 5-1/2 inch (140 mm)
board width and 1-1/2 inch (38 mm) batten width.
3. Thickness: 0.050 inch (.127 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
4. Color: As selected by Architect from manufacturers
standards.
5. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Colonial Ivory
j. Maple
k. Monterey Sand
l. Vintage Wicker
m. Tuscan Clay
R. Vinyl Siding: CenterLock double 4-1/2 inch (114 mm)
clapboard.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the clapboard style
with 3/4 inch (19 mm) butt height.
3. Additional center panel locking configuration with double
thick rolled edge nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
S. Vinyl Siding: CenterLock double 4-1/2 inch (114 mm) dutch
lap.
1. 4-1/2 inch (114 mm) dutch lap profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the dutch lap style
with 3/4 inch butt height.
3. Additional center panel locking configuration with double
thick rolled edge nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
T. Vinyl Siding: Odyssey Plus double 5 inch (127 mm)
clapboard.
1. 5 inch (127 mm) clapboard profile.
2. Each 10-inch (254 mm) wide horizontal siding panel nominally
configured as two 5 inch (127 mm) panels in the clapboard style
with 5/8 inch (15.8 mm) butt height.
3. Staggered double nail slots with double thick rolled over
nail hem.
4. Length: 12 feet (3.68 m).
5. Width: 10-inch (254 mm).
6. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
U. Vinyl Siding: Odyssey Plus double 5 inch (127 mm) dutch
lap.
1. 5 inch (127 mm) dutch lap profile.
2. Each 10-inch (254 mm) wide horizontal siding panel nominally
configured as two 5 inch (127 mm) panels in the dutch lap style
with 5/8 inch (15.8 mm) butt height.
3. Staggered double nail slots with double thick rolled over
nail hem.
4. Length: 12 feet (3.68 m).
5. Width: 10-inch (254 mm).
6. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
V. Vinyl Siding: Odyssey Plus double 4 inch (102 mm)
clapboard.
1. 4 inch (102 mm) clapboard profile.
2. Each 8-inch (204 mm) wide horizontal siding panel nominally
configured as two 4 inch (102 mm) panels in the clapboard
style.
3. Staggered double nail slots with double thick rolled over
nail hem.
4. Length: 12 feet 6 inch (3.81 m).
5. Width:8 inches (204 mm).
6. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
W. Vinyl Siding: Odyssey Plus double 4 inch (102 mm) dutch
lap.
1. 4 inch (102 mm) dutch lap profile.
2. Each 8 inch (204 mm) wide horizontal siding panel nominally
configured as two 4 inch (102 mm) panels in the dutch lap
style.
3. Staggered double nail slots with double thick rolled over
nail hem.
4. Length: 12 feet 6 inch (3.81 m).
5. Width: 8 inches (204 mm).
6. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
X. Vinyl Siding: Seneca double 4-1/2 inch (114 mm)
clapboard.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the clapboard
style.
3. Length: 12 feet 1 inch (3.68 m).
4. Width: 9 inches (229 mm).
5. Thickness: 0.042 inch (0.106 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
Y. Vinyl Siding: Coventry by Alside double 4 inch (102 mm)
clapboard.
1. 4 inch (102 mm) dutch lap profile.
2. Each 8-inch (204 mm) wide horizontal siding panel nominally
configured as two 4 inch (102 mm) panels in the dutch lap
style.
3. Staggered double nail slot with double thick rolled edge nail
hem.
4. Length: 12 feet 6 inches (3.81 m).
5. Width: 8 inches (204 mm).
6. Thickness: 0.042 inch (0.106 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
Z. Vinyl Siding: Coventry by Alside double 5 inch (127 mm)
clapboard.
1. 5 inch dutch lap profile.
2. Each 10 inch wide horizontal siding panel nominally
configured as two 5 inch (127 mm) panels in the dutch lap
style.
3. Length: 12 feet (3.66 m)
4. Width 10 inches (254 mm).
5. Thickness: 0.042 inch (0.106 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AA. Vinyl Siding: Coventry by Alside double 4 inch (102 mm)
dutch lap.
1. 4 inch (102 mm) dutch lap profile.
2. Each 8-inch (204 mm) wide horizontal siding panel nominally
configured as two 4 inch (102 mm) panels in the dutch lap
style.
3. Staggered double nail slot with double thick rolled edge nail
hem.
4. Length: 12 feet 6 inches (3.81 m).
5. Width: 8 inches (204 mm) .
6. Thickness: 0.042 inch (0.106 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AB. Vinyl Siding: Coventry by Alside double 5 inch (127 mm)
dutch lap.
1. 5 inch dutch lap profile.
2. Each 10 inch wide horizontal siding panel nominally
configured as two 5 inch (127 mm) panels in the dutch lap
style.
3. Length: 12 feet (3.66 m)
4. Width 10 inches (254 mm).
5. Thickness: 0.042 inch (0.106 mm)
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AC. Vinyl Siding: Coventry by Alside triple 3 inch (76 mm)
clapboard.
1. 3 inch (76 mm) clapboard profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as three 3 inch (76 mm) panels in the clapboard
style.
3. Length: 12 feet 1 inch (3.68 m).
4. Width: 9 inches (229 mm).
5. Thickness: 0.040 inch (0.10 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AD. Vinyl Siding: Conquest double 4-1/2 inch (114 mm)
clapboard.
1. 4-1/2 inch (114 mm) clapboard profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the clapboard style
with 3/4 inch (19 mm) butt height.
3. Additional center panel locking configuration with double
thick rolled edge nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.040 inch (0.10 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AE. Vinyl Siding: Conquest double 4-1/2 inch (114 mm) dutch
lap.
1. 4-1/2 inch (114 mm) dutch lap profile.
2. Each 9-inch (229 mm) wide horizontal siding panel nominally
configured as two 4-1/2 inch (114 mm) panels in the dutch lap style
with 3/4 inch butt height.
3. Additional center panel locking configuration with double
thick rolled edge nail hem.
4. Length: 12 feet 1 inch (3.68 m).
5. Width: 9 inches (229 mm).
6. Thickness: 0.040 inch (0.10 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AF. Vinyl Siding: Architectural 7 inch (178 mm) Shake.
1. Length: 60-3/4 inches (1543 mm).
2. Width: 7 inches (178 mm).
3. Deep cedar grain texture and double rolled over nail hem.
4. 3/4 inch (19 mm) nominal field butt height.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
5. Color: As selected by Architect from manufacturers
standards.
6. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AG. Vinyl Siding: Architectural 7 inch (178 mm) Shakes Outside
Corner Post.
1. Length: 56 inches (1422 mm).
2. Deep cedar grain texture and double rolled over nail hem.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
3. Color: As selected by Architect from manufacturers
standards.
4. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AH. Vinyl Siding: Architectural 6 inch (152 mm) Scallop.
1. Length: 60 inches (1524 mm).
2. Width: 8 inches (203 mm).
3. Cedar grain texture.
4. 5/8 inch (16 mm) nominal field butt height.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
5. Color: As selected by Architect from manufacturers
standards.
6. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AI. Vinyl Siding: Architectural Scallops Starter Strip.
1. Length: 60 inches (1524 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
2. Color: As selected by Architect from manufacturers
standards.
3. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AJ. Vinyl Siding: Architectural 10 inches (254 mm) Staggered
Shake.
1. Length: 62-1/2 inches (1587.5 mm).
2. Width: 10 inches (254 mm).
3. Deep cedar grain texture with double thick rolled over nail
hem.
4. 1 inch (25.5 mm) nominal field butt height.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
5. Color: As selected by Architect from manufacturers
standards.
6. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AK. Vinyl Siding: Architectural 10 inches (254 mm) Staggered
Shakes Outside Corner Post.
1. Length: 60 inches (1524 mm).
2. Deep cedar grain texture with double thick rolled over nail
hem.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
3. Color: As selected by Architect from manufacturers
standards.
4. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AL. Vinyl Siding: Architectural 7 inches (178 mm) Shingle.
1. Length: 60-3/4 inches (1543 mm).
2. Width: 7 inches (178 mm).
3. Milled cedar grain texture with double thick rolled over nail
hem.
4. 5/8 inch (16 mm) nominal field butt height.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
5. Color: As selected by Architect from manufacturers
standards.
6. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AM. Vinyl Siding: Architectural 7 inches (178 mm) Shingles
Outside Corner Post.
1. Length: 56 inches (1422 mm).
2. Milled cedar grain texture with double thick rolled over nail
hem.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
3. Color: As selected by Architect from manufacturers
standards.
4. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AN. Vinyl Siding: Architectural Double 5 inch (178 mm)
Shingle.
1. Length: 62-3/4 inches (1587.5 mm).
2. Width: 5 inches (127 mm).
3. Milled cedar grain texture with double thick rolled over nail
hem.
4. 5/8 inch (16 mm) nominal field butt height.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
5. Color: As selected by Architect from manufacturers
standards.
6. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AO. Vinyl Siding: Architectural Double 5 inch (178 mm) Shingle
Outside Corner Post.
1. Length: 60 inches (1524 mm).
2. Milled cedar grain texture with double thick rolled over nail
hem.
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
3. Color: As selected by Architect from manufacturers
standards.
4. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
AP. Polypropylene Siding: Pelican Bay single 7 inch (178 mm)
Traditional Shake.
1. 7 inches cedar shake
2. Each 14-1/4 inches (362 mm) panel nominally configured as two
7 inch (178 mm) with 5/8 inch (16 mm) nominal butt height.
3. Natural cedar texture.
4. Length: 81 inches (2057 mm).
5. Width: 14 inches (356 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Platinum Gray
d. Coastal Sage
e. Cape Cod Gray
f. Adobe Cream
g. Maple
h. Monterey Sand
i. Vintage Wicker
j. Tuscan Clay
k. Autumn Red
l. Heather
m. Ivy
n. Slate
o. Harbor Blue
p. Walnut
AQ. Polypropylene Siding: Pelican Bay 6-3/4 inch (159 mm)
scallop.
1. 6-3/4 inches (157 mm) cedar scallop
2. Each 15-1/2 inch (394 mm) panel nominally configured as two
7-3/4 inches (197 mm) with 1/2 inch (12.5 mm) niminal butt
height.
3. Natural cedar texture.
4. Length: 76 inches (1930 mm).
5. Width: 18-7/8 inches (479 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Platinum Gray
d. Coastal Sage
e. Cape Cod Gray
f. Adobe Cream
g. Maple
h. Monterey Sand
i. Vintage Wicker
j. Tuscan Clay
k. Autumn Red
l. Heather
m. Ivy
n. Slate
o. Harbor Blue
p. Walnut
AR. Polypropylene Siding: Pelican Bay 9-1/16 inches hand split
shake.
1. 9-1/16 inches deep cedar shake.
2. Each 18-7/16 inches panel nominally configured as two 9-1/16
inches with 1-7/16 inches butt height.
3. Deep natural cedar texture.
4. Length: 40-5/8 inches.
5. Width: 18-7/16 inches.
6. Thickness: .100 inch (25 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Platinum Gray
d. Cape Cod Gray
e. Adobe Cream
f. Monterey Sand
g. Tuscan Clay
h. Heather
2.4 SOFFIT
** NOTE TO SPECIFIER ** Select soffits from the paragraphs
below. Delete those not required.
A. Vinyl Soffit: Greenbriar beaded D4 inch soffit.
1. Each 8 inch (204 mm) wide panel nominally configured as two 4
inch (102 mm) panels with an accent bead in both aerated and solid
panels with 5/8 inch (15.9 mm) butt height.
2. Aerated panels invisibly perforated with 3.2 sq. inch (21 sq.
cm) net free area per l/ft.
3. Length: 12 feet 6 inches (3.81 m).
4. Width: 8 inches (204 mm).
5. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Platinum Gray
d. Monterey Sand
B. Vinyl Soffit: Charter Oak T3.33 inch invisibly vented,
reinforced soffit.
1. Each 10-inch (254 mm) wide panel nominally configured as
three 3.33-inch (85 mm) panels in both aerated and solid panels
with 3/4 inch (19 mm) butt height.
2. Aerated panels invisibly perforated with 3.2 sq. inch (21 sq.
cm) net free area per l/ft.
3. TriBeam panel reinforcement system.
4. Length: 12 feet 0 inches (3.68 m).
5. Width: 10 inches (254 mm).
6. Thickness: 0.042 inch (0.106 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
7. Color: As selected by Architect from manufacturers
standards.
8. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. Autumn Red with BASF additives and modifiers for fade
protection
p. Heather with BASF additives and modifiers for fade
protection
q. Ivy with BASF additives and modifiers for fade protection
r. Slate with BASF additives and modifiers for fade
protection
s. Harbor Blue with BASF additives and modifiers for fade
protection
t. Walnut with BASF additives and modifiers for fade
protection
u. London Brown with BASF additives and modifiers for fade
protection
C. Vinyl Soffit: Alliance T4 inch soffit.
1. Each 12-inch (305 mm) wide panel nominally configured as
three 4-inch (102 mm) panels in both aerated and solid panels.
2. Aerated panels lanced with 2.3 sq. inch (15 sq. cm) (center
vented panel) or 7 sq. inch (45 sq. cm) net free area (full vented
panel) per l/ft.
3. Length: 12 feet 6 inches (3.81 m).
4. Width: 12 inches (305 mm).
5. Thickness: 0.040 inch (0.10 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. London Brown
D. Vinyl Soffit: Superspan D5 inch soffit.
1. Each 10-inch (254 mm) wide panel nominally configured as two
5-inch (127 mm) panels in both aerated and solid panels with 5/8
inch (15.9 mm) butt height.
2. Aerated panels lanced with 7 sq. inch (45 sq. cm) net free
area per l/ft.
3. Length: 12 feet (3.66 m).
4. Width: 10 inches (254 mm).
5. Thickness: 0.044 inch (0.11 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
b. Antique Parchment
c. Natural Linen
d. Platinum Gray
e. Silver Moss
f. Coastal Sage
g. Cape Cod Gray
h. Mystic Blue
i. Adobe Cream
j. Colonial Ivory
k. Maple
l. Monterey Sand
m. Vintage Wicker
n. Tuscan Clay
o. London Brown
E. Vinyl Soffit: 2-T Triple 4 inch soffit.
1. Each 12-inch (305 mm) wide panel nominally configured as
three 4 inch (102 mm) panels in both aerated and solid panels.
2. Aerated panels lanced with 7 sq. inch (45 sq. cm) net free
area per l/ft.
3. Length : 12 feet 6 inches (3.81 m).
4. Width 12 inches (305 mm)
5. Thickness: 0.040 inch (0.10 mm).
** NOTE TO SPECIFIER ** Select one of the following two
paragraphs for color. If second paragraph is used, select color
required and delete those not required. If more than one color is
required, select the colors required and indicate the location of
each on the Drawings.
6. Color: As selected by Architect from manufacturers
standards.
7. Color shall be as follows:
a. Glacier White
2.5 ACCESSORIES
A. Standard Accessories:
1. Consistent with shape, size, and properties shown on the
drawings and as required for complete installation.
2. Produced from the same compound materials and with comparable
properties as the siding.
3. Color: Matching or color coordinated with siding.
B. Wide Pocket Accessories
1. 4 inch (102 mm) traditional outside corner post with foam
insert
2. 3 inch (76 mm) beaded corner starter
3. 7 inch (178 mm) lineal
4. 1-1/2 inch (38 mm) j-channel
5. Two piece j-channel
** NOTE TO SPECIFIER ** For additional architectural detail
select Trimworks decorative accessories as required from the
following paragraphs. Delete the paragraphs not required.
C. Trimworks Decorative Accessories:
1. 2 inch (51 mm) beaded corner starter.
2. 2-1/2 (64 mm) inch wide face j-channel.
3. Custom crown molding.
4. Soffit crown molding.
5. 45 degree bay/bow corner.
6. 3-1/2 (89 mm) inch H-trim.
7. 6 inch (152 mm) belly band.
8. Color: Matching or color coordinated with siding.
PART 3 EXECUTION
3.1 EXAMINATION
A. Confirm that all critical dimensions are as specified on the
drawings.
B. Beginning installation indicates Installer's acceptance of
substrate as suitable to accept siding and soffits.
3.2 PREPARATION
A. Repair substrate flaws or defects before applying siding or
soffits.
B. Where necessary, fur surfaces to an even plane and free from
obstructions before application.
3.3 INSTALLATION
A. Install siding and soffits in accordance with the latest
edition of "Vinyl Siding Installation Manual," published by the
Vinyl Siding Institute (VSI) and special details from the
drawings.
B. Install vinyl siding, soffits, and accessories in accordance
with best practice, with all joint members plumb and true.
3.4 FIELD QUALITY CONTROL
A. After installation of siding and soffits, check entire
surface for obvious flaws or defects.
B. Replace and repair any problem areas, paying close attention
to the substrate for causes of the problem.
3.5 CLEANING
A. After application of siding and soffits, clean as necessary
to remove all fingerprints and soiled areas.
B. Upon completion of siding application, clean entire area,
removing all scrap, packaging, and unused materials related to this
work.
END OF SECTION
07 46 33 - 1
