Ratchets - 120 Positions, 3 Degree Ratcheting Arc The GearWrench 120XP™ Ratchets take access to the next level, making it easier and quicker to complete jobs. The Double-Stacked Pawl design delivers 120 Positions, exceeds ASME torque performance requirements and gives easy access to fasteners, delivering eXtreme Productivity. 120 positions give a 3° ratcheting arc, so you can turn a fastener in tighter confines. ACCESS • Teardrop low profile head and flush mounted on/off switch allow better access in tight spaces • Longer reach handle to access hard to reach fasteners Access SPEED STRENGTH Double-Stacked pawls deliver 180% of ASME torque performance* Low profile head and flush mounted on/off switch allow better access in tight spaces. *Results are based on Apex Tool Group testing of 3/8" drive 120XP Ratchet. GearWrench® • 120 positions, 3° ratcheting arc • The gear is alternately engaged by the double-stacked pawls which give a 3° swing arc for faster work • Highly visible on/off markings on the head Speed • Enclosed head design for extreme resistance to dirt infiltration • Double-stacked pawls engage a 60-tooth gear providing exceptional strength, exceeding ASME specifications Strength • Full polish chrome, balanced handle
Transcript
Ratchets - 120 Positions, 3 Degree Ratcheting Arc
The GearWrench 120XP™ Ratchets take access to the next level, making it easier and quicker to complete jobs. The Double-Stacked Pawl design delivers 120 Positions, exceeds ASME torque performance requirements and gives easy access to fasteners, delivering eXtreme Productivity.
120 positions give a 3° ratcheting arc, so you can turn a fastener in tighter confines.
