B 127 BPD Quality Management for Procurement With Vendor Evaluation (2)

Business Process Procedures

AutoEdge

EHP4 for SAP ERP 6.0

March 2011

EnglishEnglish

Quality Management APOfor Procurement with Vendor Evaluation (127)

SPARTA

A KPIT Cummins Company

Corporate Headquarters111 Woodmere Road Suite 200Folsom, CA 95630888-985-0301916-985-0300Business Process Documentation

Contents

5QM for Procurement with Vendor Evaluation (127)

51Purpose

52Prerequisites

52.1Master Data and Organizational Data

62.2Business Conditions

62.3Roles

73Process Overview Table

94Process Steps

94.1Purchasing

94.1.1Display List of Purchase Requisitions to be Assigned and Converted to Purchase Orders

104.1.2Receive Goods from Vendor to the Purchase Order

114.2Quality Inspection

114.2.1Call Inspection Lot Worklist Inspection Instruction and Report

124.2.2Record Results

134.3Goods are OK

134.3.1Usage Decision

154.3.2Evaluate Vendor

164.4Defects and Returns

164.4.1Defects Recording

174.4.2Usage Decision and Quality Notification Creation

184.4.3Create Return Delivery

204.4.4Goods Issue for Return Delivery

214.4.5Complete Notification

224.4.6Evaluate Vendor

245Appendix

245.1Reversal of Process Steps

265.2SAP ERP Reports

265.3Used Forms

QM for Procurement with Vendor Evaluation (127)

1 Purpose

This scenario deals with quality inspection activities during the procurement process.

A customer orders goods from specified vendor 300001. On goods receipt, an inspection lot is generated according to the defined material specification. A usage decision is then made as to whether to accept or reject the material, based on the inspection result (in this scenario, the material is rejected). Processes such as quality notification and vendor evaluation follow.

The scenario focuses on the following activities:

Goods Receipt based on Purchase Order

Inspection Defects Recording

Usage Decision after inspection

Quality Notification creation and completion

Goods Return to Vendor and Return Delivery Creation Vendor Evaluation process

2 Prerequisites

2.1 Master Data and Organizational Data

A range of indispensable master and organizational data was created in your ERP system in the implementation phase, such as the data that reflects the organizational structure of your company, as well as master data that suits its operational focus, for example, master data for materials, vendors, customers, and so on.

This master data usually consists of standardized SAP Best Practices default values and enables you to go through the process steps of this scenario.

Note You can test the scenario with other material, or organizational data for which you have created master data. To find out how to create master data, refer to the Master Data Procedures documentation.Use the following master data in the process steps described in this document:

Manufacturing / TradeMaster dataValueComments

MaterialR120

Plant1000

Vendor300001

PO from Procurement to Stock scenario (130)

2.2 Business Conditions

The business process described in this Business Process Documentation is part of a bigger chain of integrated business processes or scenarios. Consequently, you must have completed the following processes and fulfilled the following business conditions before you can start going through this scenario:

Business conditionScenario

You have completed the following steps described in the Business Process Documentation Prerequisite Process Steps (154):

Roll MM Period to Current Period. Perform this activity if the MM period in the system is not set to the current period. Usually, this activity has to be done once a month.

Product Costing: Costing RunPrerequisite Process Steps (154)

2.3 Roles

Use

The following roles must have been installed to test this scenario in the SAP NetWeaver Business Client (NWBC). The roles in this Business Process Documentation must be assigned to the user or users testing this scenario. You do not need these roles if you are not using the NWBC interface, but the standard SAP GUI.

Prerequisites

The business roles have been assigned to the user who is testing this scenario.

Business roleTechnical nameProcess step

Employee (Professional User)SAP_NBPR_EMPLOYEE-SAssignment of this role is necessary for basic functionality.

Warehouse Clerk SAP_NBPR_WAREHOUSECLERK-S MIGO, VL02N

Quality SpecialistSAP_NBPR_QUALMGR-SQGA3, QA32, QE01, QA11, QF11, QM10

PurchaserSAP_NBPR_PURCHASER-SME61

3 Process Overview Table

Process stepExternal process referenceBusiness conditionBusiness roleTrans-action codeExpected results

Purchasing

Process purchase requisitions to Purchase OrdersProcurement-to-Stock (130)See scenario no. 130See scenario no. 130See scenario no. 130

Receive Goods from Vendor to the Purchase OrderWarehouse ClerkMIGOInspection lot from goods receipt

Quality Inspection

Inspection Report (Check Standard Report)Quality SpecialistQGA3Inspection lot information printed out for review

Call Inspection Lot Worklist (optional)Quality SpecialistQA32Worklist with inspection lots without a usage decision is shown.

Record ResultsQuality SpecialistQE01Result of the quality inspection recorded

Goods are OK

Usage DecisionQuality SpecialistQA11Usage decision for material inspection lot

Evaluate VendorPurchaserME61Vendor evaluation

Defects and Returns

Defects RecordingQuality SpecialistQF11Defect for material recorded

Usage Decision and Quality Notification CreationQuality SpecialistQA11Usage decision for material inspection lot

Create Return DeliveryQuality SpecialistQM10Quality notification entered into the system, return delivery created

Post Goods IssueWarehouse ClerkVL02NReturn goods issue posted

Complete NotificationQuality SpecialistQM11Quality notification completed

Evaluate VendorPurchaserME61Vendor evaluation

4 Process Steps

4.1 Purchasing

4.1.1 Display List of Purchase Requisitions to be Assigned and Converted to Purchase Orders

This step in procurement is the same whether or not you are procuring material with quality management functionality (BPD 127) or without QM functionality (BPD130).

To execute this activity please refer to process step 4.1 4.6 in BPD 130 (Procurement w/o QM).using the master data belowSteps to process from scenario Procurement without QM(130)

Display List of Purchase Requisitions to be Assigned (Requisitions are created because of a demand or low/no stock. There may be sufficient inventory in the system so no requisition exists or are needed for material R120. If so proceed to step Create Purchase Order Manually)Evaluation of the Stock or Requirement List

Convert Assigned Requisitions to Purchase Orders

Create Purchase Order manually

Change Purchase Order

Approval of Purchase Orders

Master Data

Field nameUser action and valuesComment

MaterialR120

Vendor300001

Result

After executing this step, the purchase order is created with reference to each item of the purchase requisition.

Note For printing handling and procedure of purchase orders please see the building block

Procurement without QM (130), section Print Purchase Order4.1.2 Receive Goods from Vendor to the Purchase Order

Use

Take packing slip from container and verify part number on container and quantity matches packing slip information. Also verify number of containers received.

Procedure

1. Access the transaction choosing one of the following navigation options:

Option 1: SAP Graphical User Interface (SAP GUI)

SAP ECC menuLogistics ( Materials Management ( Inventory Management ( Goods Movement ( Goods Receipt ( For Purchase Order ( PO Number Known

Transaction codeMIGO

2. On the Goods Receipt - screen, ensure that Goods Receipt and Purchase Order are selected in the fields on the top of the screen. 3. Enter the purchase order number and choose Enter.

4. Choose 2 Individual slip with inspection text checkbox, to print a goods receipt/issue slip.

Note If multiple lines exist, choose the Close Detail Data button to be able to view all lines. Choose the line and continue the process. If you want to find an item with a particular part number within the PO, enter the part number then choose Search in Item Overview. When a line appears with the correct part number, select the line and continue the process. 5. On the Quantity tab, under item level, enter the quantity to be received.

Note Production data needs to be entered if Batch Management is applicable.6. Change storage location if necessary and enter the text field (optional).

7. If material is serialized: On the Serial Numbers tab, enter serial number. If serial number is unknown, search for one by using the Find button.

8. If material is handled in batches: On the Batch tab, enter the external batch number, or leave empty for internal number assignment.

9. Choose the Item OK checkbox at the bottom of screen.

10. Choose Post.

Option 2: SAP NetWeaver Business Client (SAP NWBC) via business role

Business roleWarehouse Clerk (SAP_NBPR_WAREHOUSECLERK-S)

Business role menuWarehouse Management ( Receiving ( Purchase Order

1. On the All Purchasing Documents Ready for Goods Receipt screen, mark . 2. Choose Create Material Document 3. Choose Individual slip checkbox to print a goods receipt/issue slip.

Note If multiple lines exist, choose the Close Detail Data button to view all lines. Choose the line and continue the process. To find an item with a particular part number within the PO, enter the part number then choose Search in Item Overview. When a line appears with the correct part number, select the line and continue the process. 4. On the Quantity tab, under item level, enter the quantity to be received.

Note Production data needs to be input if Batch Management is applicable.5. On the Where tab, change the storage location if necessary, and enter the text field (optional).

6. If material is serialized: On the Serial Numbers tab, enter serial number. If serial number is unknown, search for one by using the Find icon.

7. If material is handled in batches: On the Batch tab, enter the external batch number or leave empty for internal number assignment.

8. Select the Item OK checkbox at the bottom of screen.

9. Choose Post.

Result

An inspection lot has been created. It can be viewed by displaying the material document. 4.2 Quality Inspection4.2.1 Call Inspection Lot Worklist Inspection Instruction and ReportUse

The purpose of this activity is to print out the inspection instruction and the inspection report.Procedure



SAP ECC menuLogistics Quality Management Quality Inspection Worklist Inspection Change Data

Transaction codeQA32


Business roleQuality Specialist (SAP_NBPR_QUALMGR-S)

Business role menuQuality Management ( Quality Inspection ( Inspection Lot ( Change data for inspection lot

2. On the Inspection Lot Selection screen, make the following entries, and then choose Enter:


Lot created onFrom-date and to-dateSystem proposes dates

PlantPlant 1(1000)You can also use input help (F4)

List settingsSelect only inspection lots without a usage decision

3. Choose Execute (F8).

The worklist with inspection lots, without a usage decision, is shown. From here, you can perform the following steps directly (instead of accessing the transactions step by step):

1. Print inspection instruction ( Inspection lot ( Inspection instruction2. Print inspection report ( Inspection ReportOn the Result Printout screen, enter the inspection lot number in the Inspection Lot field and form YBUS_QM_INS_RLT in the Form field (section print parameters), then choose Execute.

On the Print: window, enter a printer (for example, LOCL for local printer) in the Output Device field, and then choose Print.Note You can also choose Print Preview to check the layout and details before printing out the report.3. Result recording ( Result button.4. Defect recording ( Defects button.5. Make usage decision ( Usage Decision button.Result

The inspection lot information is printed out for review.4.2.2 Record Results

Use

The purpose of this activity is to record the results of the quality inspection of the goods in the system.

Procedure



SAP ECC menuLogistics Quality Management Quality Inspection Inspection Result For Operation Record

Transaction codeQE01



Business role menuQuality Management ( Quality Inspection ( Inspection Results ( Record characteristic results

2. On the Record Results: Initial screen, make the following entries, then choose Enter:

Field nameDescriptionUser action and valuesComment

Inspection LotInspection lot number determined in the step beforeYou can also use input help (F4)

3. On the Record Results: Characteristic Overview screen, make the following entries, and then choose Enter:


AcceptXFlag checkbox

ResultResult of specification01 (for okay)You can also use input help (F4)

4. Save your entries.5. Choose Back to return to the SAP Easy Access screen.Result

The result of the quality inspection for the material has been recorded.Note From here, you have two options to proceed:

If no defect was recorded, go to section 4.3, Goods are OK to finish the process.

If defects were recorded, go to section 4.4 Defects and Returns.4.3 Goods are OK4.3.1 Usage Decision

Use

Since no defect was recorded during the inspection procedure, the usage decision should be made to accept the material. Subsequently, the material should be sent to unrestricted stock.

Procedure



SAP ECC menuLogistics ( Quality Management ( Quality Inspection ( Inspection Lot ( Usage Decision ( Record




Business role menuQuality Management ( Quality Inspection ( Inspection Results ( Record usage decision

2. On the Record Usage Decision: Initial Screen, enter the inspection lot determined in the previous step and choose Enter to confirm your entries.3. On the Record Usage Decision: Characteristic Overview screen, in the UD code field, in the first open field box, use the input help (F4) to choose YB02-01-Usage Decision at Goods Receipt ( 01 Quality test complied), and confirm with Enter.Note If the dialog box: Reqd characteristics still open! Do you want to force inspection completion? appears, choose Yes. So you do not have to inspect every single item of the whole amount.NoteCurrently the selection of code groups within the input help (F4) is not restricted, so that all available code groups will be listed. To restrict it to the relevant code group (here YB02-01), refer to the configuration guide for this building block under the section Maintain Inspection Type.

4. Choose the Inspection lot stock tab.5. Choose the Proposal button.6. Choose Enter to confirm your entries.7. Choose Save to save the Usage Decision. The system issues the message: Usage Decision for lot Plant_1 (1000) xxxxxxxxxx is saved.8. When saving and if material is serialized: On the Copy Serial Numbers dialog box, delete the serial numbers which should not be posted to the stock use. For example, unrestricted or blocked.

9. Choose Back to return to the SAP Easy Access screen.Result

The Usage Decision has been made for the material inspection lot.Note In the stock overview, you can see that the amount in the quality inspection stock has been moved to the unrestricted stock.

SAP GUI: Transaction MMBE

SAP NWBC: Role Warehouse Monitoring (SAP_NBPR_WAREHOUSECLERK-S), path Purchasing ( Goods Movement and Stocks ( Stocks ( Stock Overview.Enter material, plant and storage location from above.4.3.2 Evaluate Vendor

Use

The purpose of this activity is to valuate the vendor after the goods have been inspected and returned.

Procedure



SAP ECC menuLogistics Materials Management Purchasing Master Data Vendor Evaluation Maintain

Transaction codeME61


Business role Purchaser (SAP_NBPR_PURCHASER-S )

Business role menuPurchasing ( Reporting ( Vendor Evaluation ( Maintain Vendor Evaluation

2. On the Maintain Vendor Evaluation: Initial Screen screen, make the following entries:


Purch. Organization1000

VendorNATIONAL_VENDOR1(300001)

3. On the Maintain Vendor Evaluation: Overview of Main Criteria screen, set the Weighting Key to 01.4. On the same screen, choose (NWBC: More () Edit ( Auto. new Evaluation from the menu. The system then evaluates the vendor again, and the score against Quality is increased automatically.

5. Choose Save to confirm your entries.The system ends the vendor evaluation process with the message Evaluation record changed.

6. Choose Back to return to the SAP Easy Access screen.Result

Vendor evaluation is performed.4.4 Defects and Returns

4.4.1 Defects RecordingUse

This is an alternate step if goods inspected are not acceptable. The purpose of this activity is to record the defects of the goods in the system.

Procedure



SAP ECC menuLogistics Quality Management Quality Inspection Defects Record for Inspection Lot

Transaction codeQF11



Business role menuQuality Management ( Quality Inspection ( Defects ( Record defects for inspection lot

2. On the Record Defects for characteristics: Initial Screen, make the following entries then choose Enter:


Inspection LotInspection lot number determined in the step beforeYou can also use input help (F4)

Report Type00000010Defect type and no. of defects (summ.)

3. On the Defect overview for insp. lot: Record screen, make the following entries, and then choose Enter:


Code groupYB02-01You can also use input help (F4)

Code12Defective component

4. Save your entries.5. Choose Back to return to the SAP Easy Access screen.Result

The defect for the material has been recorded.4.4.2 Usage Decision and Quality Notification CreationUse

Since a defect was recorded during the inspection procedure, the usage decision should be made to reject the material. Subsequently, the material should be sent to blocked stock, and a quality notification created to inform the vendor of the rejection.

Procedure



SAP ECC menuLogistics ( Quality Management ( Quality Inspection ( Inspection Lot ( Usage Decision ( Record




Business role menuQuality Management ( Quality Inspection ( Inspection Lot ( Record usage decision

2. On the Record Usage Decision: Initial Screen, enter the inspection lot determined in the previous step and choose Enter to confirm your entries.3. On the Record Usage Decision: Defect Overview screen, in the UD code field, use the input help (F4) to choose YB02-01 Usage Decision at Goods Receipt ( 02 Quality test failed (to blocked stock), and confirm with Enter.Note If the dialog box: Reqd characteristics still open! Do you want to force inspection completion? appears, choose Yes. So you do not have to inspect every single item of the whole amount.Note Currently, the selection of code groups within the input help (F4) is not restricted, so that all available code groups are listed. To restrict the relevant code group (here YB02-01), please refer to the configuration guide of this building block, section Maintain Inspection Type.

4. Select the defects item line, and then choose Activate notification or Ctrl+F2.5. On the Quality Notification: Activate screen, make the following entries:


Priority2High

CodingYB02-01 03Vendor Problem

DescriptionReject for defects inspected

CoordinatorFor Example, your user name

6. Choose Enter to confirm your entries. The system activates the notification and issues the message: Marked defect item(s) activated.7. Choose the Inspection lot stock tab.8. Choose the Proposal button, and enter 1060 in the StLoc field.Note Optional: You can also post the quantity to scrap stock in this step and perform related scrapping steps. These are not described in this scenario.9. Choose ENTER to confirm your entries.10. Choose Save to save the Usage Decision. The system issues the message: Usage Decision for lot xxxxxxxxxx is saved.11. Choose Back to return to the SAP Easy Access screen.Result

The Usage Decision has been made for the material inspection lot.4.4.3 Create Return Delivery

Use

Following rejection of the material, you need to create a return delivery to return the material to the vendor. A customer number is assigned to the vendor as a return customer.

Procedure



SAP ECC menuLogistics ( Quality Management ( Quality Notification ( Worklist ( Notification ( Change Data

Transaction codeQM10



Business role menuQuality Management ( Quality Notifications ( Change list of quality notifications

2. On the Change List of quality notifications: Selection of Notifications screen, make the following entries:


OutstandingSet indicator

Notification DateUse the date system proposed

3. Choose Execute to load the notifications.4. Select the applicable notification, and choose the Notification button or Ctrl + Shift + F6.5. On the Change Notification: Vendor-Rel. Defect screen go to (NWBC: More ( ) Notification (Print (Notification.6. Select the ShopPaper 5999 (Rejection Report) and choose Print/Fax (F8) to print the Rejection Report. Note On the Change quality notification: Partners screen enter your user name as partner in the coordinator function and choose return.

7. On the Change List of Qual. Notification: List of Notifications screen, select your notification, and choose Notification.8. On the Change Notification: Vendor-Rel. Defect screen, choose QM: Activity Description in the Action box.9. On the Internal Note screen, enter a description i.e. Return Delivery. 10. Choose Enter to confirm your entries.11. On the Action box, choose Log Telephone Call, and make the following entries in the Outgoing Call window:Field nameDescriptionUser action and valuesComment

StartUse the date system proposed

EndUse the date system proposed

Conversation statusReached

Subject of conversationdescription

12. Confirm with Enter.

13. On the Change Notification: Vendor-Rel. Defect screen, choose the green flag Put in Process.14. Save your entries.15. On the Change List of Qual. Notification: List of Notifications screen, select your notification, and choose Notification.16. On the Change Notification: Vendor-Rel. Defect screen, choose Create Return Delivery in the Action box.17. On the Create Return Delivery screen, enter 0003 in the Reason for Movement field and 1060 in the Stor.loc field.18. Choose Enter to confirm your entries.19. Confirm the following warning message with Yes.20. The system then creates the return delivery with the message Return delivery created with number xxxxxxxxxx.21. Choose Back twice to return to the SAP Easy Access screen.Note If an error occurs during the last step of delivery creation, go back to the SAP Easy Access screen and repeat this step.Result

The quality notification has been entered into the system and return delivery has been created.4.4.4 Goods Issue for Return DeliveryUse

In this activity, you fill in the picking quantity and post the goods issue.

Procedure



SAP ECC menuLogistics ( Logistics Execution ( Outbound Process ( Goods Issue for Outbound Delivery ( Outbound Delivery ( Change ( Single Document

Transaction codeVL02N



Business role menuWarehouse Management ( Shipping ( Outbound Delivery( Change Delivery

2. On the Return Del. To Vendor 8xxxxxxx Change: Overview screen, choose the Picking tab, and enter the following data:


Picked Qty.Picked QuantityEnter your PO quantity

3. Choose Post Goods Issue.

4. The system displays the message: Return Del. To Vendor xxxxxxxxxx has been saved.5. Choose Back to return to the SAP Easy Access screen.Result

The return goods issue is posted.Note The print out of the delivery note is executed automatically and immediately (see settings in transaction VV23 for Output Type LD00, and user setting defaults in transaction SU01).

You can also start the print out manually:

1. On the Display Outbound Delivery Initial Screen, from the menu, choose Outbound Delivery ( Issue delivery Output.2. Choose the line with the message type LD00 Delivery Note.3. Choose the PRINT icon.4.4.5 Complete Notification

Use

After the material is sent back to the vendor, the notification should be closed.

Procedure



SAP ECC menuLogistics ( Quality Management ( Quality Notification ( Worklist ( Notification ( Display Data

Transaction codeQM11



Business role menuQuality Management ( Quality Notifications ( Display List of Quality Notifications

2. On the Display List of Qual. Notification: Selection of Notifications screen, make the following entries:


OutstandingSelect indicator

Notification DateUse the date system proposed

3. Choose Execute to load the notifications.4. Choose Display Change to switch from display to change mode.5. Select the notification with the description: Reject for defects inspected.6. Choose Notification.7. On the Change Notification: Vendor-Rel. Defect screen, choose Complete.8. Confirm the information message with the proposed time and External Origin by choosing Enter.9. The system then completes the notification with the message: Notification xxxxxxxxxx completed.10. Choose Back twice to return to the SAP Easy Access screen.Result

Quality notification is completed.4.4.6 Evaluate Vendor

Use

The purpose of this activity is to valuate the vendor after the goods have been inspected and returned.

Procedure



SAP ECC menuLogistics Materials Management Purchasing Master Data Vendor Evaluation Maintain

Transaction codeME61


Business rolePurchaser (SAP_NBPR_PURCHASER-S)

Business role menuPurchasing ( Reporting ( Vendor Evaluation ( Maintain Vendor Evaluation

2. On the Maintain Vendor Evaluation: Initial Screen, make the following entries, and choose Enter:


Purch. Organization1000

VendorNATIONAL_VENDOR1(300001)

3. On the Maintain Vendor Evaluation: Overview of Main Criteria screen, set the Weighting Key to 01.4. On the Maintain Vendor Evaluation: Overview of Main Criteria screen, choose Edit ( Auto. New Evaluation from the menu. Note In SAP NWBC, choose More first.5. The system then evaluates the vendor again, and the score against Quality is decreased automatically.6. Choose Save to confirm your entries.7. The system ends the vendor evaluation process with the message: Evaluation record changed.8. Choose Back to return to the SAP Easy Access screen.Result

Vendor evaluation is performed.5 Appendix

5.1 Reversal of Process Steps

In the following section, you can find the most common reversal steps, which you can take to reverse some of the activities described in this document.Receive Goods from Vendor to Purchase Order

Transaction code (SAP GUI)MIGO

Reversal:Cancel material document

Transaction code (SAP GUI)MBST


Business role menuWarehouse Management ( Material Documents ( Cancel material document

CommentThe material posting of the material document is reversed. The original document remains in the systems database

Evaluate Vendor

Transaction code (SAP GUI)ME61

Reversal:Evaluate vendor

Transaction code (SAP GUI)ME61

Business rolePurchaser (SAP_NBPR_PURCHASER-S)

Business role menuPurchasing ( Reporting (Vendor Evaluation ( Maintain Vendor Evaluation

Comment

Defects Recording

Transaction code (SAP GUI)QF11

Reversal:Change defects recording

Transaction code (SAP GUI)QF02


Business role menuQuality Management ( Quality Inspection ( Defects ( Record defects for inspection lot

Comment

Usage Decision and Quality Notification Creation

Transaction code (SAP GUI)QA11

Reversal:Change usage decision

Transaction code (SAP GUI)QA12


Business role menuQuality Management ( Quality Inspection ( Inspection Lot ( Change usage decision with History

Comment

Create Return Delivery

Transaction code (SAP GUI)QM11

Reversal:Delete return delivery

Transaction code (SAP GUI)VL02N


Business role menuWarehouse Management ( Shipping ( Outbound Delivery ( Change Delivery

Comment

Post Goods Issue

Transaction code (SAP GUI)VL02N

Reversal:Cancel goods issue

Transaction code (SAP GUI)VL09


Business role menuWarehouse Management ( Shipping ( Outbound Delievry ( Cancel Goods Issue for Delivery Note

Comment

Complete Notification


Reversal:Change notification



Business role menuQuality Management ( Quality Notifications ( Change quality notification

Comment

5.2 SAP ERP Reports

Use

The table below lists the most frequently used reports that help you to obtain additional information on this business process.

Note You can find detailed descriptions of the individual reports in the following BPD documents, which provide a comprehensive compilation of all important reports:

Financial Accounting: SAP ERP Reports for Accounting (221) Logistics Processes: SAP ERP Reports for Logistics (222)Note that the descriptions of some reports that are an indispensable part of the process flow may be located directly in the section where they belong.Reports

Report titleTransaction codeComment

List Display of Purchase RequisitionsME5AA list of all selected purchase requisitions is displayed.

List of NotificationsQM11A list of several notifications, from which you can select one or more notifications for editing or displaying.

Stock OverviewMMBEThe stock overview is displayed.

5.3 Used Forms

Use

In some of the activities of this business process, forms were used. The table below provides details on these forms.

Common form nameForm typeUsed in process step Output typeTechnical name

Delivery NoteSmartFormCreate Return DeliveryLD00YBUS_SDDLN

Result printoutSAPscript formInspection Report (Check Standard ReportYBUS_QM_INS_RLT

Rejection ReportSmartFormYBUS_QMCOM

2011 Sparta ConsultingPage 14 of 14

Date post:	24-Nov-2015
Category:	Documents
Upload:	bcherif003
View:	52 times
Download:	9 times