Boundary Conditions : 2000 lb on the top surface
Boundary Conditions :
1. 2000 lb on the top surface
2. 1 Atm Pressure on the outer surfaces
Modifications:
1. Included two longitudinal ribs
2. Attached two Triangular ribs on four corners
11
2
Boundary Conditions :
• 2000 lb on the top surface
• 1 Atm Pressure on outer surfaces
Modifications:
1. Included radial rib in the middle
2. Removed the two Triangular ribs on four corners
3. Reduced the lengths of the plates on the top.
1
Symmetry Works !!!!!
FE Model : Puffing Latest1
Stresses above 13 ksi ( Allowable stress )
Modifications:
1. Included top plate to hold valves
2. Added ribs on the corners
3. Working Stress is 24 Ksi ( 6061 T6 Al)
1
2