Candy FINAL BOQ

7/30/2019 Candy FINAL BOQ

1/35

column

length width ht no.s cum

1.2 0.4 26.60 10 127.68

1.2 0.4 20.00 14 134.40

1.2 0.4 6.10 24 70.27

total col 332.35

beam length ht width

beam 1 15.6 x 0.7 x 0.4 15.6 0.7 0.40 12 52.42

beam 2 4.5 x 0.7 x 0.23 4.5 0.7 0.23 18 13.04

beam 3 5.5 x 0.23 x 0.55 5.5 0.55 0.23 6 4.17

69.63stilt ,1st ,2nd 3rd ,terrace floor 5.00 348.16

rcc beam 348.16

footing length width depth no.s qty

footing 3 2 0.70 24 100.80

raft 1000 1 0.30 1 300.00

beam 1 15.6 0.7 0.30 12 39.31

beam 2 4.5 0.7 0.30 18 17.01

beam 3 5.5 0.7 0.30 6 6.93

totla footing 464.05

slab

0.2 736.00 5 736.00

0.2 136.00 1 27.20

slab total 763.20

stiarcase 0.2 64 7 89.6

staircase with paradi 98.56

lift 34.1 2.50 2 170.50

totla lift 170.5

retaining wall 45 4.5 1 202.5

foundation 350 0.70 1 245.00

total rcc 2412.86

column above plinth

column below plinth

terrace (st and lift didct)

stilt,1st 2nd 3rd 4th (st and lift didct)

column above plinth


2/35


3/35

cum

cum

cum

cum

cum


4/35

sqm

sqm

sqm

sqm

sqm

cum

cum

cum

cum

cum

2313.00

cum

cum

cum

cum

cum

cum

cum

cum

cum

ton

sqm

sqm

sqm

sqm

sqm

NO.S

NO.S

NO.S


5/35

Project : merwqan cake factory

Note : All rates are inclusive of taxes

Sr. No. Description Unit Quantity Rate Amount

A SHELL & CORE

A1 EARTH WORK

1 Excavation

Note : All quantities below are inclusive of back filling and banking

with approved good quality earth in plinths, area leveling etc. in

layers each not exceeding 200mm in depth, breaking clods,

watering, compacting each layer with vibratory compactor and at

inaccessible places with wooden/steel raming,etc complete.

a

Excavation soft soil , murrum for foundation by means of

mechanical /manual including removing the excavated materials

upto a distance of 50 meters beyond the building area and lift as

specified, stacking, necessary dewatering unless provided

elsewhere, preparing bed for the foundation and required backfilling with available earth / murum, ramming, watering etc.

complete as directed excluding shoring and strutting, etc.

Cum - 250 0.00

b

Excavation in soft rock, hard murrum for foundation by means of

mechanical /manual including removing the excavated materials

upto a distance of 50 meters beyond the building area and lift as


elsewhere, preparing bed for the foundation and required back

filling with available earth / murum, ramming, watering etc.


CUM R.O 450

c

Excavation in hard rock for foundation by means of mechanical /

manual including removing the excavated materials upto a

distance of 50 meters beyond the building area and lift as





Cum 5,400 2,200 11,880,000.00

2

Murum filling from Contractors murum. Includes filling of murum

earth in layers of 300mm depth, watered, rammed/compacted by

vibrating roller of 25Ton capacity. Compaction should be done

with the use of Vibro rollers.

Sqm 1,200 300 360,000.00

3

Dry rubble soling : Providing and doing 230mm thick dry rubble

soling, voids filled with stone chips and screened with

murrum/sand including compaction with mechanical vibratory

com actor com lete.

Sqm 1,200 300 360,000.00

A2 CONCRETE WORK

R.C.C. ITEMS EXCLUDING REINFORCEMENT AND PLASTER unless

otherwise specified for this tender

Concrete Grade to be M : 25 (1:1:2) unless otherwise specified

Ready Mix Concrete (RMC) : Providing and casting with ready mix

concrete of reputed brand with pump facility upto the job

including shuttering and formwork, casting made as per drawings

with cut outs, voids, projections, levels, inserts, embedments and

deshuttering and curing completed.


6/35

The Contractor must also submit a Ready Mix Conctrete report

(to be obtained from a laboratory by sending a sample of the RMC

to the construction laboratory) for compressive strength prior to

the commencement of work validating the quality of RMC.

The rates for all items covered in this section shall include cost of

dewatering, if required till completion of works upto ground level

and chamfers in RCC works shall be provided wherever required at

no extra cost to the owner.

The rate also includes cost of providing offsets, cut outs, pockets,

construction joints, making holes in or cutting formwork for taking

out dowel bars, hacking the exposed surfaces to receive plaster as

necessary.

No extra will be paid if nominal mix is used instead of design mix.

R.O. - Rate Only

Nos. - Numbers

1

R.M.C. M10 Grade : Providing and laying R.M.C. M10 Grade

concrete for plain cement concrete (PCC) below foundation and

leveling course etc.; including compacting, curing, required

shuttering and its removal, dewatering where required, cleaning,

preparing surfaces, junctions, etc.complete. - For below Footing

Cum 120 5,500 660,000.00

2

R.M.C. Grade M15 : Providing and laying R.M.C. Grade M15

Grade concrete for plain cement concrete (PCC) below foundation

and leveling course etc.; including compacting, curing, required

shuttering and its removal, dewatering where required, cleaning,

preparing surfaces, junctions, etc.complete with trimix finish.- For

Plinth level.

Cum - 6,500 0.00

3

M25 Grade RMC : Providing and laying well design & mixed M25

Grade RMC and transported to site, pumped / lifted at the

location of pour with the contractors own arrangement,etc.;

including compacting, curing, required shuttering and its removal,

dewatering where required, cleaning, preparing surfaces,junctions, etc.complete. inclding shuttering, shoring, scaffolding

deshuttering ,curing etc complete

a Footings Cum 460 8,500 3,910,000.00

b raft slab Cum 360 8,500 3,060,000.00

c Plinth Beams Cum 70 8,500 591,855.00

d Columns Cum 301 10,000 3,010,000.00

e chajja Cum 14 10,500 141,750.00

f basement verticle wall Cum 60 10,000 600,000.00

g Podium floors- beams finished with trimix)

i beams Cum 87 10,500 913,920.00

iii simple one way slab 0.15 thk ( Finished with trimix) sqm - 975 0.00

Office floors

iv slab 0.20thk sqm 739 2,200 1,625,800.00v capital 1.5 x 1.5 x 0.17 m sqm - 1,105 0.00

e

Trimix flooring : Providing & laying 100 mm thick Trimix flooring

with M20 in panels of size as instructed including laying concrete

,compacting, curing, cleaning, preparing surfaces, junctions, etc.

including placing M.S. channels to make panels,etc. Rate is

including Leveling by mechanical floater machine, making groove

size & depth as instructed by mechanical cutter machine & filling

the same with bitumen of grade approved, all complete at all lifts

and leads as per specifications to the entire satisfaction.

f Staircase INCLUDING PARDI Cum 42 10,000 420,000.00


7/35

g

Overhead water Tank 6m X 3m X 2.5m of 40,000 litres capacity

made of RCC above internal staircase crystalline waterproofing

outside and inside with waterproofing plaster bottom slab 0.2m

thk, RCC side walls 0.23m thk, internal partitions of 0.15m thk.

each and top slab 0.15m thk. Water tight manhole with cast iron

0.45m X 0.6m it.

ltr 50,000 15 750,000.00

h

RCC underground water tank of 9.54m X 8.74m X 2.5m deep

2,00,000 litres capacity as per given drawing. Excavation pit to be

neatly dressed for PCC. Excavated earth to be levelled. Shahabad

ladi for waterproofing for bottom and side RCC raft 0.2m thk

including haunch 0.3m long from all sides to partitions of 0.15m

thk. each RCC wall and top slab to be 0.2m thk. Internal

waterproofing plaster with crystalline waterproofing. Top slab

should be waterproofed from rainwater. 3 nos. of Water tight

manhole with cast iron 0.45m X 0.6m pit for foot valve and

embedded GI steps to clean tank

ltr 200,000 15 3,000,000.00

i

Box type water proofing : Providing and doing proprietary box

type water proofing by approved waterproofing agency; using

rough Shahabad stone cladding process to floors and walls from

outside including required injection grouting if any of concrete all

complete, as per approved method of proprietor / manufacturer.

The system shall be guaranteed for 10 years on Rs. 500 stamp

paper in the proforma approved. (Actual area in plan & elevationas treated shall be measured) (Lift pit/UG Tank). Treatment

Description will be as per below-

sq.m. 1,200 1,200 1,440,000.00

j

Treatment to Horizontal Surfaces -

1) Preparing, cleaning and laying 20 mm thick bed of cement sand

mortar mix ratio 1:4 (1 cement : 4 sand) bedding including

waterproofing compound 2% by weight of cement.

2) Embedding 20 mm to 25 mm size aggregate to finish surfaces to

create key to fix stone and curing the area.

3) Fixing 19 mm thick Shahabad laid by grouting and bedding

with 20 mm thick in cement sand mortar mix 1:4 (1 cement : 4

sand) over keyed surface including adding 2% approved

waterproofing compound by weight of cement; surface cured.

4) Joints pointed and grouted with cement sand mortar and entiresurface bedded with cement sand mortar mix 1:4 (1 Cement : 4

Sand) about 20 mm thick and finished smooth and cured.

5) Where required, pressure release pipes shall be provided during

installing the above system and same shall be pressure grouted on

completion of RCC raft including counter weight if any for the

uplift of the raft to approval. Treatment to

Vertical Surfaces-

1) Preparing the surface including making V grooves at

junctions, joints, cracks etc. providing nozzles and grouting then

under pressure.

2) Fixing 19 mm thick Shahabad stones to walls, by keeping a gap

of 20 mm on rear side, grouting the joints and next day grouting

the entire gap between stone and vertical surface with cement

sand grout mix ratio 1:3 (1 cement : 3 sand) including 2%waterproofing compound by weight of cement.

3) Plastering entire surface with cement sand mortar ratio 1:4 and

2% waterproofing about 20 mm thick and f inished smooth.

kLift machine room for passenger and cargo lift, staircase top,

parapet wall top and chajjacu.m. 140 10,000 1,400,000.00

A3 REINFORCEMENT WORK


8/35

1

Providing,Cutting,bending & fixing in position - M.S. / H.Y.S.D.

/T.M.T. bar reinforcement of various diameters for R.C.C. footings,

foundations, slabs, beams, columns, staircases, chajjas, lintels,

pardies, coping, etc. as per detailed designs, drawings and

schedules, including, cutting, bending, hooking the bars, binding

with wires etc. complete.

MT 390 65,000 25,350,000.00

A4 MASONRY WORK

1

Brick (150mm thick) masonry : Providing and constructing in sub

and superstructure with locally available first quality bricks having

minimum crushing strength 35 Kg/Sq. cm and maximum water

absorption 20%, in cement mortar CM 1:4 (1 cement : 4 Sand)

mixed with approved non-shrinking compound as per

manufacturers instruction in specified courses of approved bond,

curing, doing independent double legged scaffolding as per

specifications etc. at heights and leads.

CUM 140 5,000 700,000.00

2

115mm thick brick masonry : Providing and constructing in sub

and superstructure with locally available first quality bricks having

minimum crushing strength 35 Kg/Sq. cm and maximum water

absorption 20%, in cement mortar CM 1:4 (1 cement : 4 Sand)

mixed with approved non-shrinking compound as per

manufacturers instruction in specified courses of approved bondcomplete with raking out joints, curing, doing independent double

legged scaffolding, all complete as per specifications etc. at

heights, depths and leads. and including providing RCC patli beam

of 115mm x 100 mm at every 1.00m C/C with 2 nos. 8 mm dia Tor

bars and 6 mm dia links at 300 c/c in cement concrete of mix M

20.

Sqm - 600 0.00

3

Random rubble stone masonry in (1:6) cement mortar in

foundations, plinth, trenches, drains, pits etc. as specified

including fair cutting, waste, bonding, plumbing, lining, levelling

the surface to receive damp-proof course, finishing flush or raking

joints etc. required making creep holes, scaffolding, curing, etc. as

indicated in Clause 3.5 of IS:1200 (Part IV); all materials and labour

com lete.

Sqm R.O. 3,500

A5 PLASTER WORK

1

Internal plaster : Providing and applying 12mm thick plaster in

cement mortar mix ratio CM 1:4 (1 cement : 4 sand) mixed with

approved polypropylene fibres as per recommandations of the

approved manufacturer, to internal surfaces of concrete and

masonry work; including raking out joints, hacking concrete

surfaces , curing for creating a possitive bond, preparing junctions

of concrete / masonry by neat cleaning, pointing / grouting

junctions by pressing square crush aggregate; also providing and

fixing 20 gauge GI chicken mesh @ 150 mm wide to junctions of

concrete and masonry, preparing jambs, sills, grooves, pattas,

wattas, rounding of corners, etc. all complete as per architectural

drawings, specifications and finished smooth with wooden rundha

etc; at all leads,depth and lifts, doing independent double-legged

scaffolding, cleaning of surfaces, curing, etc. complete as per

specification and approval.

Sqm - 300 0.00


9/35

2

External plaster : Providing and applying minimum 20 mm thick

double coat cement sand plaster; first coat to be 10 to 12mm

thick cement sand mortar in mix ratio 1:4 (1 cement : 4 sand) and

second coat to be 8 to 10 mm thick in cement sand mortar of mix

ratio CM 1:3 (1 cement : 3 sand) mixed , finished sand face or as

required to receive specified architectural finish, to correct line,

plumb and level to external faces of walls, sofits/ceiling if any,

including hacking concrete surfaces, applying chemical adhesive

coating and a scrach/dash coat as a possitive bond, curing thesame, racking out junctions of masonry and concrete, pointing and

grouting using non-shrinking compound, joints grouted by

pressing square crushed stone, further providing 150mm wide

20gauge GI chicken mesh at junctions of concrete and masonry

work, doing independent double legged scaffolding etc. Item also

include plastering to precast concrete window sills, RCC cornices

curing, cleaning, etc. all complete to the approval.(to external

surfaces)

Sqm - 500 0.00

B FINISHING WORK

B1 Water Proofing Work

1

Crystalline waterproofingto sunk portions of toilets or any other

required locations with a guarantee of 10 years. complete to the

entire satisfaction. Toilet / Sunk portion shall be tested by ponding

water for 72 hrs.

sq.m. 100 650 65,000.00

2Waterproofing for stilt area with brickbat coba sloping to drain

average thickness 112Sqm - 900 0.00

3

Terrace waterproofing : Designing, providing and installing

proprietary terrace waterproofing consisting of applying approved

make / manufacture cementetious chemical coating to cleaned

prepared, grouted porous surface and further treated with

brickbat cement concrete average thickness 112 mm laid in

required slope (minimum cement consumption 0.5 bag/sqm)

FINISHED good surface to receive anit-skid tiling (Anti Skid Tiling

rate is not included in the waterproofing )outlet and rain water

pipes grouted, including curing, ready to receive floor finish as per

drawings, testing by ponding water about 200 mm high for 72 hrs.

protecting till handover etc. all complete as per specifications or

equivalent as approved. Contractor has to provide guarantee for

10 years on Rs.100/- stamp paper in approved proforma.

Sqm 800 1,000 800,000.00

B2 FLOORING WORK

1

Mirror finish Vitrified tiles : Providing and fixing vitrified mirror

finish tiles ( 600 x 600 mm ) flooring of approved size & thickness

over 35 to 45 mm thick 1 : 6 cement sand bedding including ,

transportation , cleaning, placing, fixing , joint filling ,etc. to

complete upto satisfaction. Note that the laying of IPS toaccomodate raceways (electrical cable tray) is included in this

quantity. ( Workstation and cabin Flooring )

Sqm R.O. 1,200

3

Vitrified tiles : Providing and fixing vitrified tiles ( 600 x 600 mm

) flooring of approved size & thickness over 35 to 45 mm thick 1 :

6 cement sand bedding including , transportation , cleaning,

placing, fixing , joint filling ,etc. to complete upto satisfaction. (

Sqm 2,313 1,200 2,775,600.00


10/35

4

Kota stone : Providing and fixing kota stone ( 600 x 600 mm )

flooring of approved size & thickness over 35 to 45 mm thick 1 : 6

cement sand bedding including , transportation , cleaning,

placing, fixing , joint filling ,etc. to complete upto satisfaction. (

Service area flooring + Balcony Area )

Sqm - 900 0.00

6

Kota stone : Providing and laying polished 20 mm thick Kota stone

for 2 No.s Service staircases landing & midlanding including

cutting, fixing cutting, JOINT FILLING with white cement &

pigment etc. complete upto satisfaction. Providing & laying 18 to

20 mm thk. Kota stone for steps treads. Providing & laying 18 to

20 mm thk. Kota stone skirting for staricase steps . Rate is

including cutting,shifting,placing,polishing,chamfering

,cleaning,etc. complete upto satisfaction.

Sqm 192 1,400 268,800.00

7

kota stone : Providing and laying polished 20 mm thick kota stone

for main staircase landing & midlanding including cutting, fixing

cutting, JOINT FILLING with white cement & pigment etc.

complete upto satisfaction. Providing & laying 18 to 20 mm thk.

kota stone for steps treads. Providing & laying 18 to 20 mm thk.

kota stone skirting for staricase steps . Rate is including

cutting,shifting,placing,polishing,chamfering ,cleaning,etc.

complete upto satisfaction.

Sqm - 1,200 0.00

5

Granite flooring : Providing and fixing granite flooring of

approved size & thickness over 35 to 45 mm thick 1 : 6 cement

sand bedding including , transportation , cleaning, placing, fixing ,

joint filling ,etc. to complete upto satisfaction. ( Entrance lobby

Sqm - 3500 0.00

Anti-skid outdoor tiles on stilt floor and Terrace Floor: Providing

and fixing Anti-skid out door tiles of size 600x600 mm of approved

size and thickness over 45mm on 1:6 cement sand bedding

including transportation, placing, fixing ,epoxy joint f illing and laid

to slo e

1 800 1000 800,000.00

B3 painting work

1

Providing & applying OBD ( oil bound Distemper) at required level

& locations including 2 coat of primer & two coats of paints . Rate

is iclusive all required

materials,labours,tools,tackles,scaffolding,etc. to complete the

work u to satisfaction. Internal Area of Rooms

Sqm R.O. 100

2

Providing & applying LUSTER PAINT at required level & locations

including 2 coat of primer & two coats of paints . Rate is iclusive all

required materials,labours,tools,tackles,scaffolding,etc. to

complete the work upto satisfaction. (Main passage area )

Sqm R.O. 140

3

Providing and applying external SANDTEX MATT paint of

approved make and colour conforming to IS in two coats (surface

and finish acceptable must be achieved by the contractor and any

additional coats if required shall be at the cost of the

contractor);including preparing surfaces ,cleaning and making the

surface dustfree,applying cement based primer coat of paint as

recommended by approved paint manufacturer, applying two

coats of paint (of approved make and shade), requiredconsumables, double leged scaffolding , curing,cleaning and

protecting till the handing over of site to the employer all

complete to entire satisfaction.

Sqm - 120 0.00

B4 pu pannaling


11/35

1

A External tinted with slab support sq.m. R.O.

Curved surface (included in the above) sq.m. R.O.

B Internal plain with slab support sq.m. R.O.

C External tinted without slab support sq.m. R.O.

DOffice area glazing (taking 3.2m ht. from slab to beam bottom for

6 floors)sq.m. R.O.

2

ACP PANELLING: Aluminium composite panels exterior type along

with necessary filling of epoxy joints, cutting, fixing, finishing

complete. Selection of premimium grade S.S. finish (Terrace

roof/crown+entrance canopy)

sq.m. 260 0.00

B5 DOORS

1

D (1.8m X 2.4m) Building Entrance door sliding both sides

operated by sensor with 8 mm thk planin toughned glass edged

with Epidium Edge buffer

nos. 0 30000 0.00

2

D1 1.2M X 2.1m Door to pump room, e ectr ca room an

service passage on office floors. teak wood flush door with bothsides marine ply 6mm thick with approved design of approved

company (Durian or equivalent) with finished with 1.5 mm thk

laminate both sides teakwood frame 75mm X 100mm with

architrave and door closer, 4 brass hinges, locking systems/ door

knob with lock.

nos. 0 24000 0.00

3

D2 (0.9m X 2.1m) Office cabins and toilet main door. Teakwood

flush door with both sides marine ply 6mm thick with approved

design of approved company (Durian or equivalent) finished with

1.5 mm thk laminate both sides with teakwood frame 75mm X

100mm with architrave and door closer, 4 brass hinges, locking

systems/ door knob with lock.

Note : The office cabin doors will have a visibility glass pane of

450mm X 300mm of tempered glass.

nos. 0 20000 0.00

4

D3 (2m X 2.1m) Office area entrance and refuge area entrance

double leaf swinging door (1.0m X 2.1m each) with aluminium

heavy gauge with 200mm wide frame and centre mulion with

12mm thick tempered glass with aluminium door frame and door

closer, 4 brass hinges, locking systems/ door knobs with lock.

nos. 2 35000 70,000.00

5

D4 (1.5m X 2.1m) Fire escape staircase single leaf door. Mild steel

powder coated door with mild steel frame of approved make

(75mm X 100mm) with door closer, 4 brass hinges, locking

systems/ door knobs with lock.

nos. 2 32000 64,000.00

6

D5 (0.75m X 2.1m) Duct and toilet cubicle door. Teakwood flush

door with both sides marine ply 6mm thick with approved design

of approved company (Durian or equivalent) finished with 1.5 mm

thk laminate both sides with teakwood frame 75mm X 100mm

with architrave and door closer, 4 brass hinges, locking systems/

door knob with lock.

nos. 6 20000 120,000.00

7

D6 (0.95 X 2.1m) Office floor terrace entrance door. Teakwood

flush door with both sides marine ply 6mm thick with approved

design of approved company (Durian or equivalent)finished with

1.5 mm thk laminate both sides with teakwood frame 75mm X

100mm with architrave and door closer, 4 brass hinges, locking

systems/ door knob with lock.

nos. 0 20000 0.00


12/35

8

D7 (0.95 X 2.1m) Physically challenged single leaf toilet door.

Teakwood flush door with both sides marine ply 6mm thick with

approved design of approved company (Durian or equivalent)

finished with 1.5 mm thk laminate both sides with teakwood

frame 75mm X 100mm with architrave and door closer, 4 brass

hin es with manual lockin s stem.

nos. 0 20000 0.00

B6 slding door

1 RS (2.5m X 2.4m) nos. 3 0.00

B7 WINDOWS

1

W1 (1.5m X 2.7m) Staircase window Supplying, fitting and fixing in

position aluminium glazed sliding windows conforming to IS : 1948

at all levels Aluminex or approved equivalent make using extruded

aluminium sections (HE9WP), silver anodised to 20 microns in

matt finish with outer frames of 1.5 mm thick suitable for four

tracks including three 1.5 mm thick sliding glass

shutters and one 1.5 mm thick sliding mosquito proof screen

shutter along with glazing with 4 mm thick clear sheet or float

glass, of approved make

all fittings and fixtures such as lugs, stoppers, spring locks with

handle , glazing beads, clips, packing plates, rubber channels,

weather strips, antilift, safety plate, joinery, screws, etc. all

materials and labour complete to the satisfaction of the Employer.

nos. 17 9000 153,000.00

B8 VENTILATORS

1

V1 (0.6m X 0.6m) Toilet ventilator. Aluminium louvered

ventilators with fixed glass louvres of bajri glass with M.S. grill

outside the window fixed to the wall 12.5mm X 12.5mm square

rods at 100mm c/c with 1 red oxide coat and 2 coats of enamel

paint of Asian make

nos. 0 1500 0.00

2

V2 (0.9m X 0.6m) Electrical room ventilator. Aluminium louvered

ventilators with fixed glass louvres of bajri glass with M.S. grill

outside the window fixed to the wall 12.5mm X 12.5mm square

rods at 100mm c/c with 1 red oxide coat and 2 coats of enamelpaint of Asian make

nos. 9 2000 18,000.00

B9 TOILET

B9a OFFICE GENTS TOILET nos. 3LIST OF FIXTURES FOR ONE TOILET -

All fittings will be executive class, please refer drawing no. F-06.

Sanitary fitting will be of A class and top line fittings of

JaquarBrand or equivalentUNDER COUNTER JAGUAR BASIN FLS-WHT-0401

(SIZE (mm) 545 x 420 x 190)nos. 2 4875 29,250.00

FLR-5025B JAGUAR Single Lever Mini Basin Mixer without Popup

Waste System with 450mm Long Braided Hosesnos. 2 1350 8,100.00

25mm thk. polished granite platform with rounded edge 100mm

wide Granite skirting fixed to platform sq.m. 0.9 2000 5,400.006mm mirror with 75mm ply frame with polyutherene backing

fixed with S.S. screws and covered with S.S. headssq.m. 1.35 2000 8,100.00

JAGUAR URINAL URS-WHT-0702

SIZE (mm) 365 x 315 x 610 with sensory flushnos. 3 1200 10,800.00

20mm thk. granite partition 0.45m X 1.2m chamfered at one

cornersq.m. 1.62 2000 9,720.00

JAGUAR WALL HUNG - WC FLS-WHT-0111 nos. 1 2000 6,000.00

JAGUAR CIB-WHT-31801011X: Slim Concealed Cistern Body, one

piece tank made from PEHD offering specific characteristics of

strength and flexibility

nos. 1 1200 3,600.00


13/35

FLV-1089DFP Metropole Flush Valve Dual Flow 40mm Size

(Concealed Body) with Concealed Shut Off Provision &

Rectangular Dual Flush Plate (ABS Chrome Plated)

nos. 1 1500 4,500.00

ACN-1151N Toilet Roll Holder nos. 1 725 2,175.00

100mm dia S.S. Nahani grill nos. 1 200 600.00

Floor finish : 1.2 x 1.2 size ceramic anti skid tiles sq.m. 10 1000 30,000.00

Wall finish : Glazed Vitrified Tiles 0.3 x 0.6 size cream coloured

mirror finish tiles for dado.sq.m. 16.8 1000 50,400.00

B9b TOILET FOR THE PHYSICALLY CHALLENGED nos. 0LIST OF FIXTURES FOR ONE TOILET -




(SIZE (mm) 545 x 420 x 190)nos. 1 1990 11,940.00




wide Granite skirting fixed to platformsq.m. 0.5 2000 6,000.00

16mm mirror with 75mm ply frame with polyutherene backing



JAGUAR CIB-WHT-31801011X: Slim Concealed Cistern Body, onepiece tank made from PEHD offering specific characteristics of


nos. 1 1200 7,200.00




nos. 1 1500 9,000.00


100mm dia S.S. Nahani grill nos. 1 200 1,200.00

300 X 300 PVC wall mounted Exhaust fan nos. R.O.



mirror finish tiles for dado.sq.m. 17 1000 102,000.00

B9c OFFICE LADIES TOILET nos. 3LIST OF FIXTURES FOR ONE TOILET -




(SIZE (mm) 545 x 420 x 190)nos. 2 1990 11,940.00




wide Granite skirting fixed to platformsq.m. 1 2000 6,000.00


SIZE (mm) 365 x 315 x 610 with sensory flushnos. 2 1200 7,200.00


cornersq.m. 1.62 2000 9,720.00


fixed with S.S. screws and covered with S.S. heads sq.m. 1.65 2000 9,900.00JAGUAR WALL HUNG - WC FLS-WHT-0111 nos. 2 2000 12,000.00




nos. 2 1200 7,200.00




nos. 2 1500 9,000.00


100mm dia S.S. Nahani grill nos. 3 200 1,800.00



14/35




B9d ground floor TOILET nos. 1LIST OF FIXTURES FOR ONE TOILET -




(SIZE (mm) 545 x 420 x 190)nos. 2 1990 3,980.00




wide Granite skirting fixed to platformsq.m. 1 2000 2,000.00







nos. 2 1200 2,400.00




nos. 2 1500 3,000.00


100mm dia S.S. Nahani grill nos. 3 200 600.00





B10 PLUMBING AND DRAINAGE

Plumbing and drainage includes providing and fixing of water

supply pipes and their connection to the fixtures, required valves,

drainage pipes (soil pipes, waste water pipes, vent pipes) nahani

traps, sewer traps). Plumbing and drainage Quotation should be

given onsystem wise basis. System of Water supply, sewage

drainage, waste water drainage and storm water drainage. Rate

includes providing fixing pipes of specified quality no.s and

thickness including start from sanitary ware to finish upto sewage

treatment plant in the compund and water supply pipes will start

from the water meter in undersground and overhead water

meters to sanitary fittings and drainage pipes from nahani traps ,

gully traps, WCs, urinals to the sewage treatment plant or storm

water drainage as per design

B10a Water supply pipe L.S.

Horizontal pipes = 4.5m/podium floor X 6 = 27

Horizontal pipes = 31m/office floor X 6 = 186Down take pipe complete with M.S. clamps @ every 1000mm = 45m X 2 = 90m

B10b Soil pipe L.S.

Horizontal pipes = 13m/office floor X 6 = 78

Horizontal pipes = 0.4m/podium floor X 6 = 2.4

Down take pipe complete with M.S. clamps @ every 1000mm = 45m X 4nos. = 180

B10c Waste water pipe L.S.

Horizontal pipes = 28m/office floor X 6 = 168

Horizontal pipes = 4.02m/podium floor X 6 = 25

Down take pipe complete with M.S. clamps @ every 1000mm = 45m X 2nos. = 90


15/35

B10d

Storm water drain pipe

Note: There needs to be a cutout of 0.3m X 0.7m in the slab for

SWD down take pipes that do not run though the main duct. Refer

dwg for the same.

L.S.

SWD from terrace : 42m X 4 nos. = 168m

SWD from office floors : 39m X 2 nos. = 78m

SWD from stilt floor : 15.9m X 2 nos. = 31.8m

B11 S.S. ITEMS

B11h

All podium columns shall be protected by means of column guards

made of S.S. angle sections 75 X 75 X 6 bolted to each of the fourcorners of the columns from finished floor level to a height of

0.9m

R.m. 0 200 0.00

Providing and Fixing S.S Railing with vertical S.S stands to hold

8mm thk Glass as a railing and top Handrail in S.S good quality as

shown in the detailed drawing.

R.m. 0 1500 0.00

Providind and Fixing S.S railing with 3 horizaontal bars of50 dia. @

300 C/C and vertically supported by 75 dia..S.S pipes good quality

and heavy gauge to protect evident to bang against curtain walling

and shown as per detailed drawing.

R.m. 0 1000 0.00

B11i

Balcony railing : M.S. powder coated black in colour with 25 X

25mm square tube placed 6" c/c upto 1m ht. with 1.5m c/c

balusters of 50 X 50 square verticals embedded in the concrete

below

R.m. 0 2500 0.00

Skylight : Providing and Fixing 5m Dia Skylight in circular shapewith aluminium heavy sections with polycarbonate sandwiched

panel covering on the top, waterproof with EPDM fixing.

sqm 0 2000 0.00

B12 road sqm 1260 3000 3,780,000.00

B12 gutter sqm 1260

69,719,900.00

6.97

TOTAL AMOUNT


16/35

Sr. No. Description Unit Quantity Rate

A SHELL & CORE

A1 EARTH WORK

1 ExcavationNote : All quantities below are inclusive of back filling and

banking with approved good quality earth in plinths, area

leveling etc. in layers each not exceeding 200mm in depth,

breaking clods, watering, compacting each layer with vibratory

compactor and at inaccessible places with wooden/steel

ramin ,etc com lete.

a

Excavation in hard rock for foundation by means of mechanical

/ manual including removing the excavated materials upto a

distance of 50 meters beyond the building area and lift as





Cum 7,200 1,800

A2 CONCRETE WORK

R.C.C. ITEMS EXCLUDING REINFORCEMENT AND PLASTER unless

otherwise specified for this tender

Concrete Grade to be M : 25 (1:1:2) unless otherwise specified

Ready Mix Concrete (RMC) : Providing and casting with ready

mix concrete of reputed brand with pump facility upto the job

including shuttering and formwork, casting made as per

drawings with cut outs, voids, projections, levels, inserts,

embedments and deshuttering and curing completed.

The Contractor must also submit a Ready Mix Conctrete report

(to be obtained from a laboratory by sending a sample of the

RMC to the construction laboratory) for compressive strength

prior to the commencement of work validating the quality of

RMC.The rates for all items covered in this section shall include cost of

dewatering, if required till completion of works upto ground

level and chamfers in RCC works shall be provided wherever

required at no extra cost to the owner.

Project : merwan

Note : All rates are inclusive of taxes


17/35

e ra e a so n c u es cos o prov ng o se s, cu ou s,

pockets, construction joints, making holes in or cutting

formwork for taking out dowel bars, hacking the exposed

surfaces to receive plaster as necessary.

No extra will be paid if nominal mix is used instead of design

mix.

R.O. - Rate OnlyNos. - Numbers

1

R.M.C. M10 Grade : Providing and laying R.M.C. M10 Grade

concrete for plain cement concrete (PCC) below foundation and

leveling course etc.; including compacting, curing, required

shuttering and its removal, dewatering where required,

cleaning, preparing surfaces, junctions, etc.complete. - For

below Footin

Cum 180 5,400

3

M25 Grade RMC : Providing and laying well design & mixed

M25 Grade RMC and transported to site, pumped / lifted at the

location of pour with the contractors own arrangement,etc.;

including compacting, curing, required shuttering and its

removal, dewatering where required, cleaning, preparing

surfaces, junctions, etc.complete. inclding shuttering, shoring,

scaffolding deshuttering ,curing etc complete

a Footings Cum 464 8,300

b Plinth Beams Cum 70 8,300

c Columns Cum 332 9,000

i beams Cum 87 9,000

Note : Trimix flooring specification is given below

iv slab 0.23 thk sqm 763 2,100

e

Trimix flooring : Providing & laying 100 mm thick Trimix flooring

with M20 in panels of size as instructed including laying

concrete ,compacting, curing, cleaning, preparing surfaces,

junctions, etc. including placing M.S. channels to make

panels,etc. Rate is including Leveling by mechanical floater

machine, making groove size & depth as instructed by

mechanical cutter machine & filling the same with bitumen of

grade approved, all complete at all lifts and leads as per

specifications to the entire satisfaction.

f Staircase INCLUDING PARDI Cum 100 9,000

g

Overhead water Tank 6m X 3m X 2.5m of 40,000 litres capacity

made of RCC above internal staircase crystalline waterproofing

outside and inside with waterproofing plaster bottom slab 0.2m

thk, RCC side walls 0.23m thk, internal partitions of 0.15m thk.

each and top slab 0.15m thk. Water tight manhole with cast iron

0.45m X 0.6m it.

ltr 40,000 16


18/35

h

RCC underground water tank of 9.54m X 8.74m X 2.5m deep

2,00,000 litres capacity as per given drawing. Excavation pit to

be neatly dressed for PCC. Excavated earth to be levelled.

Shahabad ladi for waterproofing for bottom and side RCC raft

0.2m thk including haunch 0.3m long from all sides to partitions

of 0.15m thk. each RCC wall and top slab to be 0.2m thk.

Internal waterproofing plaster with crystalline waterproofing.

Top slab should be waterproofed from rainwater. 3 nos. of

Water tight manhole with cast iron 0.45m X 0.6m pit for foot

valve and embedded GI steps to clean tank

ltr 200,000 16

i

Box type water proofing : Providing and doing proprietary box

type water proofing by approved waterproofing agency; using

rough Shahabad stone cladding process to floors and walls from

outside including required injection grouting if any of concrete

all complete, as per approved method of proprietor /

manufacturer. The system shall be guaranteed for 10 years on

Rs. 500 stamp paper in the proforma approved. (Actual area in

plan & elevation as treated shall be measured) (Lift pit/UG

Tank). Treatment Description will be as per below-

sq.m. - 1,200

j

Treatment to Horizontal Surfaces -

1) Preparing, cleaning and laying 20 mm thick bed of cement

sand mortar mix ratio 1:4 (1 cement : 4 sand) bedding including

waterproofing compound 2% by weight of cement.

2) Embedding 20 mm to 25 mm size aggregate to finish surfaces

to create key to fix stone and curing the area.

3) Fixing 19 mm thick Shahabad laid by grouting and bedding

with 20 mm thick in cement sand mortar mix 1:4 (1 cement : 4

sand) over keyed surface including adding 2% approved

waterproofing compound by weight of cement; surface cured.

4) Joints pointed and grouted with cement sand mortar and

entire surface bedded with cement sand mortar mix 1:4 (1

Cement : 4 Sand) about 20 mm thick and finished smooth and

cured.

5) Where required, pressure release pipes shall be provided

during installing the above system and same shall be pressure

grouted on completion of RCC raft including counter weight if

any for the uplift of the raft to approval.

Treatment to Vertical Surfaces-

1) Preparing the surface including making V grooves at

junctions, joints, cracks etc. providing nozzles and grouting then

under pressure.

2) Fixing 19 mm thick Shahabad stones to walls, by keeping agap of 20 mm on rear side, grouting the joints and next day

grouting the entire gap between stone and vertical surface with

cement sand grout mix ratio 1:3 (1 cement : 3 sand) including 2%

waterproofing compound by weight of cement.

3) Plastering entire surface with cement sand mortar ratio 1:4

and 2% waterproofing about 20 mm thick and finished smooth.

kLift machine room for passenger and cargo lift, staircase top,

parapet wall top and chajjacu.m. 170 9,000


19/35

A3 REINFORCEMENT WORK

1

Providing,Cutting,bending & fixing in position - M.S. / H.Y.S.D.

/T.M.T. bar reinforcement of various diameters for R.C.C.

footings, foundations, slabs, beams, columns, staircases, chajjas,

lintels, pardies, coping, etc. as per detailed designs, drawings

and schedules, including, cutting, bending, hooking the bars,

binding with wires etc. complete.

MT 364 65,000

A4 MASONRY WORK

1

Brick (150mm thick) masonry : Providing and constructing in

sub and superstructure with locally available first quality bricks

having minimum crushing strength 35 Kg/Sq. cm and maximum

water absorption 20%, in cement mortar CM 1:4 (1 cement : 4

Sand) mixed with approved non-shrinking compound as per

manufacturers instruction in specified courses of approved

bond, curing, doing independent double legged scaffolding as

per specifications etc. at heights and leads.

CUM 201 5,000

A5 PLASTER WORK

1

Internal plaster : Providing and applying 12mm thick plaster in

cement mortar mix ratio CM 1:4 (1 cement : 4 sand) mixed with

approved polypropylene fibres as per recommandations of the

approved manufacturer, to internal surfaces of concrete and

masonry work; including raking out joints, hacking concrete

surfaces , curing for creating a possitive bond, preparing

junctions of concrete / masonry by neat cleaning, pointing /

grouting junctions by pressing square crush aggregate; also

providing and fixing 20 gauge GI chicken mesh @ 150 mm wide

to junctions of concrete and masonry, preparing jambs, sills,

grooves, pattas, wattas, rounding of corners, etc. all complete as

per architectural drawings, specifications and finished smooth

with wooden rundha etc; at all leads,depth and lifts, doing

independent double-legged scaffolding, cleaning of surfaces,

curing, etc. complete as per specification and approval.

Sqm 2,750 320


20/35

2

External plaster : Providing and applying minimum 20 mm thick

double coat cement sand plaster; first coat to be 10 to 12mm

thick cement sand mortar in mix ratio 1:4 (1 cement : 4 sand)

and second coat to be 8 to 10 mm thick in cement sand mortar

of mix ratio CM 1:3 (1 cement : 3 sand) mixed , finished sand

face or as required to receive specified architectural finish, to

correct line, plumb and level to external faces of walls,

sofits/ceiling if any, including hacking concrete surfaces,applying chemical adhesive coating and a scrach/dash coat as a

possitive bond, curing the same, racking out junctions of

masonry and concrete, pointing and grouting using non-

shrinking compound, joints grouted by pressing square crushed

stone, further providing 150mm wide 20gauge GI chicken mesh

at junctions of concrete and masonry work, doing independent

double legged scaffolding etc. Item also include plastering to

precast concrete window sills, RCC cornices curing, cleaning, etc.

all complete to the approval.(to external surfaces)

Sqm 2,756 600

B FINISHING WORK

B1 Water Proofing Work

1

Crystalline waterproofingto sunk portions of toilets or any

other required locations with a guarantee of 10 years. complete

to the entire satisfaction. Toilet / Sunk portion shall be tested by

ponding water for 72 hrs.

sq.m. 100 500

1 box water proofing sq.m. 2,300 600

3

Terrace waterproofing : Designing, providing and installing

proprietary terrace waterproofing consisting of applying

approved make / manufacture cementetious chemical coating tocleaned prepared, grouted porous surface and further treated

with brickbat cement concrete average thickness 112 mm laid in

required slope (minimum cement consumption 0.5 bag/sqm)

FINISHED good surface to receive anit-skid tiling (Anti Skid

Tiling rate is not included in the waterproofing )outlet and rain

water pipes grouted, including curing, ready to receive floor

finish as per drawings, testing by ponding water about 200 mm

high for 72 hrs. protecting till handover etc. all complete as per

specifications or equivalent as approved. Contractor has to

provide guarantee for 10 years on Rs.100/- stamp paper in

approved proforma.

Sqm 800 1,000

B2 FLOORING WORK

3

PU FLOORING

providing and applying 3mm thk self levling polyurethane

flooring apurva make floregine md after proper surface

preaparation and application of epoxy primer florprime EP.

Sqm 2,630 1,500


21/35

7

kota stone : Providing and laying polished 20 mm thick kota

stone for main staircase landing & midlanding including

cutting, fixing cutting, JOINT FILLING with white cement &

pigment etc. complete upto satisfaction. Providing & laying 18 to

20 mm thk. kota stone for steps treads. Providing & laying 18 to

20 mm thk. kota stone skirting for staricase steps . Rate is

including cutting,shifting,placing,polishing,chamfering

,cleaning,etc. complete upto satisfaction.

Sqm 448 800

Anti-skid outdoor tiles on stilt floor and Terrace Floor:

Providing and fixing Anti-skid out door tiles of size 600x600 mm

of approved size and thickness over 45mm on 1:6 cement sand

bedding including transportation, placing, fixing ,epoxy joint

1 800 1500

B3 painting work

1

Providing & applying OBD ( oil bound Distemper) at required

level & locations including 2 coat of primer & two coats of paints

. Rate is iclusive all required

materials,labours,tools,tackles,scaffolding,etc. to complete the

work upto satisfaction. ( Internal Area of Rooms )

Sqm 2,750 100

3

Providing and applying external SANDTEX MATT paint of

approved make and colour conforming to IS in two coats

(surface and finish acceptable must be achieved by the

contractor and any additional coats if required shall be at the

cost of the contractor);including preparing surfaces ,cleaning

and making the surface dustfree,applying cement based primer

coat of paint as recommended by approved paint manufacturer,

applying two coats of paint (of approved make and shade),

required consumables, double leged scaffolding , curing,cleaning

and protecting till the handing over of site to the employer all

complete to entire satisfaction.

Sqm 2,756 120

B4 PU WALL

PU WALL PANNAL 6 INCH Sqm 720

B5 DOORS

1

D1 (0.9m X 2.1m) toilet entry door.





hinges, locking systems/ door knob with lock.

Note : The office cabin doors will have a visibility glass pane of

450mm X 300mm of tempered glass.

nos. 13

1

D2 (1.0m X 2.1m)Fire escape staircase single leaf door.

Mild steel powder coated door with mild steel frame of

approved make (75mm X 100mm) with door closer, 4 brass

hin es, lockin s stems/ door knobs with lock.

nos. 14


22/35

1

D3(0.75m X 2.1m) toilet cubicle door.





hinges, locking systems/ door knob with lock.

nos. 18

B6 SLIDING DOOR SHUTTER

1

RS (4.3m X 8.5 m) Supplying, fitting and fixing in position at all

M.S. laths of convex corrugations, complete with pressed side

guide channels, suspension shaft with side brackets, hood made

out of 18 guage sheet ball bearings, locking arrangement on the

inside as well as outside etc. with one shop coat of red oxide zinc

chromate paint and two or more finishing coats of approved

make and shade synthetic enamel paint to give even and

uniform surface; all materials and labour complete.

Mechanically operated with operating lever and arrangements

for operating from inside and outside.

nos. 4

B7 WINDOWS

1

W1 (2.0m X 1.35m) Staircase window Supplying, fitting and

fixing in position aluminium glazed sliding windows conforming

to IS : 1948 at all levels Aluminex or approved equivalent make

using extruded aluminium sections (HE9WP), silver anodised to

20 microns in matt finish with outer frames of 1.5 mm thick

suitable for four tracks including three 1.5 mm thick sliding glass

shutters and one 1.5 mm thick sliding mosquito proof screen

shutter along with glazing with 4 mm thick clear sheet or float

glass, of approved make

all fittings and fixtures such as lugs, stoppers, spring locks with

handle , glazing beads, clips, packing plates, rubber channels,

weather strips, antilift, safety plate, joinery, screws, etc. all

materials and labour complete to the satisfaction of the

Employer.

nos. 61

B8 VENTILATORS

1

V1 (0.6m X 0.6m) Toilet ventilator.

Aluminium louvered ventilators with fixed glass louvres of bajri

glass with M.S. grill outside the window fixed to the wall

12.5mm X 12.5mm square rods at 100mm c/c with 1 red oxide

coat and 2 coats of enamel paint of Asian make

nos. 18

2

V2 (0.9m X 0.6m)BAEMENT ventilator.

Aluminium louvered ventilators with fixed glass louvres of bajri

glass with M.S. grill outside the window fixed to the wall

12.5mm X 12.5mm square rods at 100mm c/c with 1 red oxide

coat and 2 coats of enamel paint of Asian make

nos. 18

B9 TOILET

B9a GENTS TOILET nos. 3


23/35

LIST OF FIXTURES FOR ONE TOILET -




(SIZE (mm) 545 x 420 x 190)nos. 2


Waste System with 450mm Long Braided Hosesnos. 2


wide Granite skirting fixed to platformsq.m. 1


fixed with S.S. screws and covered with S.S. headssq.m. 1


SIZE (mm) 365 x 315 x 610 with sensory flushnos. 2


cornersq.m. 1.62

JAGUAR WALL HUNG - WC FLS-WHT-0111 nos. 2JAGUAR CIB-WHT-31801011X: Slim Concealed Cistern Body, one



nos. 2




nos. 2

ACN-1151N Toilet Roll Holder nos. 2

100mm dia S.S. Nahani grill nos. 3

Floor finish : 1.2 x 1.2 size ceramic anti skid tiles sq.m. 12


mirror finish tiles for dado.sq.m. 30

B9b LADIES TOILET nos. 3




Ja uarBrand or e uivalentUNDER COUNTER JAGUAR BASIN FLS-WHT-0401

(SIZE (mm) 545 x 420 x 190)nos. 2






fixed with S.S. screws and covered with S.S. headssq.m. 1.4

JAGUAR WALL HUNG - WC FLS-WHT-0111 nos. 2




nos. 2




nos. 2





24/35



B9c GENTS TOILET ground floor nos. 1





(SIZE (mm) 545 x 420 x 190)nos. 2








SIZE (mm) 365 x 315 x 610 with sensory flushnos. 2


cornersq.m. 1.62

JAGUAR WALL HUNG - WC FLS-WHT-0111 nos. 1JAGUAR CIB-WHT-31801011X: Slim Concealed Cistern Body, one



nos. 1




nos. 1






B9d LADIES TOILET ground floor nos. 1LIST OF FIXTURES FOR ONE TOILET -



Ja uarBrand or e uivalentUNDER COUNTER JAGUAR BASIN FLS-WHT-0401

(SIZE (mm) 545 x 420 x 190)nos. 2







JAGUAR WALL HUNG - WC FLS-WHT-0111 nos. 1




nos. 1




nos. 1



25/35





B9f DRIVER'S TOILET nos. 1


Sanitary fitting will be o f B class and B line fittings of Hindware

Brand or equivalent

490mm dia Hindware standard Basin with Jaquar Tap nos. 1

Hindware white Indian squatting Pan (Catalogue No.20003) 49

long X 28.5 wide X 24cm depthnos. 1

Hindware white Sleek Smart PVC Cistern of size 445x125x380

and a capacity of 10 litres flushingnos. 1

Hindware Chrome finish Bib Cock With Jet Spray Wall Flange

Catalogue No.(F110002)nos. 1


Floor finish : 0.6 x 0.6 size ceramic anti skid tiles of approved

colour and makesq.m. 4.71


mirror finish tiles for dado.sq.m. 16.3

TOTAL AMOUNT

TOTAL AMOUNT


26/35

AmountHead

Amount

12,960,000


27/35

972,000

3,851,200

581,000

2,988,000

783,000

1,602,300

900,000

640,000


28/35

3200000

1,530,000


29/35

23,660,000

1,005,000

880,000


30/35

1,653,600

50,000

1,380,000

800,000

3,945,000


31/35


32/35

-

-

-

-

-


33/35


34/35

0


35/35

65,545,220

Date post:	14-Apr-2018
Category:	Documents
Upload:	jnanam
View:	224 times
Download:	1 times

Candy FINAL BOQ

Documents