CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH USB …CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH USB PORT English...

CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH USB PORT

English Version

Warning: Watching TV while driving is illegal in most states.

There is a safety feature on this device which enables viewing videos only when parked.

All other features may still be used while driving, such as audio and radio, etc, but must be done with care.

Please contact an authorized installer for professional installation

DP436

2

InstallationWiring Connections 12Install the Unit 13Detach the Unit 14Install the Front Panel 15Detach the Front Panel 16

2

1 Before You StartImportant Safeguards 4 About this manual 4Precautions 5Maintenance 6Location & function of the controls 7Remote control 9 Specifications 11

1

5 Main MenuMain Menu Setup 19 Video Adjust 19Audio Adjust 20System Adjust 20

4

DVD/VCD/MP455DVD/VCD/MP4 Setup 24DVD/VCD/MP4 Play 24Selecting Tracks Fast 24Pause the Playback 24Stop the Playback 24Number Buttons 25Play tracks at Random 25Repeat Playing 25Skip backward/forward/25System Switch 25Slow Motion Playback 25Increase Picture Size 26On Screen Display 26Setting the Playback Time 26Changing Audio Language 27Changing the Subtitle Language 27Changing the Viewing Angle 27Selecting Channel 27Program Playing 28Playing PBC(Menu) 28Selecting Menu 28DVD Setup Menu 28

F.F/F.REW the

Playback

6 CD/MP3/SD/USB

CD/MP3/SD/USB Setup

CD/MP3/SD/USB Play

Selecting Tracks Fast

Repeat Playing

Number Buttons

Selecting Track

Stop Play

Playing Tracks at Random

Pause the backward

Skip backward/Forward/F.F/F.REW

the Playback

34343535353535 353636

Common Operations3To Select Source by Menu 17Reset the Unit 17Turning the Unit On/Off 17Volume Control 17Setting the Sound Characteristics 17Open the Display 17EQ Setting 18Turning Loudness On/Off 18Insert an SD Card 18Eject a Disc 18Mute Function 18Mode Selector 18Infrared Sensor 18Double Function 18

39

09Additional Information

Simple Troubleshooting Guide

No power. Check and make sure whether the fuse is blown, replace with the proper value if necessary.

Some errors occur on the LCD or does not function when pressing the button.

Unable to receive stations.

CDs cannot be loaded.

Sound skips.

Images skip.

Press RESET button.

Check and make sure whether the antenna is inserted or the antenna is properly connected, if not, insert the antenna or connect it properly.

A CD is loaded in the mechanism.

The CD is dirty or damaged.

Improper setting of the color system. Set the color system according to the connected television.

to PAL or NTSC

.

.

.

Note: If any of problems persist after referencing check list, consult your nearest service dealer. Never attempt to disassemble your unit by yourself.

Please double check the connections and installation procedure before using the checklist below.

Problem Cause/Solution

...

Due to continuous product improvement, specifications,

operation,and design are subject to change without prior

notice.

00 Contents

Simple Troubleshooting Guide 39

AUX Touch Screen Menu 38

00

3

Contents

Slow Motion Play 36On Screen Display 36Program Playing 36Eject an SD Card 36Eject a USB 36

AUX8

7 TunerListening to the Radio 35Band Selector 35Selecting The stored Station 35Manual/Automatic Tuning 35DX/LOC Selector 35MO/ST Selector 36Go to FREQ 36Scanning/Memorizing Stations

Automatically 36Number Buttons 36

Additional Information 9

38

08Press SOURCE on the remote or MOD onthe main unit or AV-R on the screen to switch to the AV-R mode as follows:

AUX Touch Screen Menu

Press again to switch to the AV-F mode:

AUX

AV-R

SRCVOL - VOL+

AV-F

SRCVOL - VOL+

Before You Start

IMPORTANT SAFEGUARDS About this manual

Be sure to connect the color coded leads according to the diagram. Incorrect con-nections may cause the unit to malfunct-

, ion or damage the vehicle s electrical sy-stem.

Be sure to connect the speaker (-) leads to the speaker (-) terminal. Never conn-ect the left and right channel speaker c-ables to each other or to the vehicle body.

Make sure all the connections are comp-letely correct before turning on your unit.

When replacing the fuse(s), the replace-ment must be of the same amperage as shown on the fuse holder. Do not block vents or radiator panels. B-locking them will cause heat to build up inside and may result in fire.

This unit features a number of sophisti-cated functions ensuring superior operation. All the functions have beendesigned for the easiest possible use,but many are not self-explanatory. This manual will help you understand the functions and operations of the unit.This manual mainly explains remote

control operation. However, in addition to those functions related withDVD/VCD/CD/MP3/MP4 operation that can only be operated by the remote control, there are also functions that can be operated by the buttons on the main unit.Improvements and changes to this Userguide necessitated by typographical errors,inaccuracies of current information, or improvements to programs and/or equip-ment, may be made by our company at any time and without notice.

To prevent driver distraction, please install the unit in an appropriate place.

Use the unit after starting the engine,otherwise

the electric energy of the battery was used up.

the unit can not be started, be-cause

The unit must be protected from direct sunlight, or the electric energy of the battery will be wasted from the high temperature. Do not use the unit in extreme high tem-peratures or very low temperature condi-tions, and also avoid humidity and direct sunlight.

Take care of the magnetism of the unit.Do no put credit cards, cassettes or w-atches around the unit, or they could be broken or some information in them lost.

To prevent disturbing of the video frequency, stay far away from the unit when using your phone.

Do not put the remote under high temperature or where the sun strikes it, or else the control can not worknormally.

control

remote

12

1

2

3

4

5

6

7

8

9

10

11

37

07Tuner

RADIO MENUTouching MENU in the monitor shows as follows:

RADIO MENU

AREASTEREOLOCAL

EXIT

PICTURE

You can touch a choice directly on the screen,including AREA,STEREO, LOCAL, PICTURE, RDS AF, RDS TA, REGION,RT SCROLL, TA VOLUME.

Area

You can select EUROPE or USA to search the stations quickly by your current area,also, you can select FM ONLY to receive the FM stations only.

RADIO MENU

AREASTEREOLOCAL

EXIT

PICTUREEUROPEU.S.AFM ONLY

Local

In this menu to search the LOCAL stations, when selected ON, the strong signal localstations can be received, when selected OFF,the week signal out-of-town stations maybe received.

STEREO

You can select "ON" or "OFF" to activatethe STEREO function.

RADIO MENU

AREASTEREOLOCAL

EXIT

PICTUREONOFF

RADIO MENU

AREASTEREOLOCAL

EXIT

PICTUREONOFF

PICTURE

In this menu, select "CAPTURED" to setthe captured picture as wallpaper; select"PRESET" to restore the initial state.

RADIO MENU

AREASTEREOLOCAL

EXIT

PICTURECAPTUREDPRESET

01

5

Before You Start

Handle the disc by its edge to keep the disc clean, and do not touch the surface.

Do not attempt to modify the unit, modifying the unit may cause an accident. Stop the vehicle before carrying out any operation that could interfere with your driving.

Do not use in extremely high or low temperatures. Be sure the temperature inside the vehicle is between +60 C and -10 C before turning on your unit . To enjoy optimum sound and images while playing, handle the discs as follows:

Do not use your CDs with paste residueor ink attached.

Do not use CDs with labels or stickers attached, which may leave a sticky residue while beginning to peel off. (Shown in the picture)

Clean the discs with an optional clean-ing cloth. Wipe each disc from the center out. (Shown in the picture)

PRECAUTIONS

36

07 Tuner

During radio mode, you can press ST button on the remote control MONO mode or STEREO

to select mode.

Stereo reception is charged when MO

disappears. It is switched to MONO mode when MO

appears.

MO/ST Selector

It is only valid on the remote control.

It is only valid in FM tuning.

6

Switch to MONO compulsively to improve the listening quality when the signal is weak.

Note:

*

*

*

Number Buttons

During radio mode, the Number Buttons

(from 1 to 6) can help you store yo-ur favorite station. You can follow the steps below:

Press and hold the AMS button toreceive stations automatically, and store them in 1 to 6 numbers respectively.

24

During radio mode, press the Number Buttons

to receive the stored stations.

4

When receiving a station, press and holdany one of the Number Buttons

(from 1 to 6) until the number app-ears on the LCD, which indicates that station is already stored in the corresp-onding number button.

Press and hold another number button more than 2 seconds when listening in a station in one number button's, thestation will be stored in that number button.

1

2

3

Scanning/Memorizing Stations AutomaticallyDuring radio mode, briefly press AMS button on the remote control to scan each stored station 6 seconds respectively wh-ich are stored in Number Buttons (from 1 to 6). You can press the corresponding N-umber Buttons or AMS button when your desired station is chosen and it starts pl-aying that station.

24

4

When you press and hold the AMS button, it will activate the automatic memory storing function. The radio automatically selects a station and has it stored in any one of the Number Buttons (from1 to 6).

4

24

Note: * The unit can be stored up to 6 stations for each band. * Pressing on the monitor or on the main unit performs the same function.

5

On Screen Display8During radio mode, press OSD to display

the edition information. Note:

* Pressing in the monitor also performs thesame function.

9

Note:

* It is only valid on the remote control.

EQ Setting

Repeatedly press the button to choose the following modes in turn:

While listening to popular music, classic music, or rock music, you select the co-rresponding preset modes to adjust the sou-nd quality touching in the monitor

can

perfectly by

The default setting is OFF.ROCK

CLASSPOP

OFF

2

2

8

Type of disc

VCD

MP3

CD

NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.

DVD

This unit can play the following discs only:

Recorded material

Sound and moving pictures

Sound and moving pictures

Sound only

Sound only

Size of disc

MPEG-4 Sound and moving pictures

Before You Start01

6 35

07Tuner

Listening to the radio

Band IndicatorShows which band the radio is tuned to.

1

EQ2

Shows to which frequency the tuner istuned.

Frequency Indicator3

Note:

FM2

AM2 AM1

FM3FM1

During radio mode, repeatedly press the BAND button to select bands in the following order:

Band Selector

3

(For Two Bands)

Manual/Automatic TuningManual Tuning: Briefly press ( button on the remote control to select thedifferent band.

or )

Automatic Tuning: ress and ) button the radio

a station or respectively and plays when it finds astation.

P hold ( or automatically searches downward upward

Note:

* Pressing BND on the main unit or in the monitor performs the same function.

1

LOC appears on the display and only local stations are available. When "DX" appears both distance and local stations can be received.

DX/LOC SelectorDuring radio mode, press LOC button to select or weak station reception.strong

5

The function is only valid on the remote control.The function is invalid in AM tuning.

Note:

**

Selecting the Stored StationDuring radio mode, press button to select the stored station upward, press toselect downward.the stored station

27

Note:

Pressing on the main unit also performs the same function.

*

Pressing in the monitor or on the main unit also performs the same function.

* 4

9 AMSPress it to scan the storing stations each5 second, press and hold it to tune automatically.

Briefly press to tune by the presettable range, press and hold to tune automatically.

4

5 SRCPress it to switch to another mode.

6 TIME SHOW

7 MENUPress it to enter MAIN MENU.

8 VOLPress it to mute.

87.50MHz

RADIOFM1

POP

CH1

AMS MENU SRC

VOL:18 06:34

MO DX

4

5

68

7

2 3

1

9

Replacing the FuseMake sure the amperage matches the specified value when replacing the fu-ses. If the fuse is blown, check the po-wer connection and replace with a n-ew one. If the same problem occurs, it may be a malfunction. In such cases,please consult the nearest service dealer.

When the range of the card remote control becomes short or no longerfunctions, replace the lithium battery with a new button cell (CR2025). Check the battery polarity before replacing.

Precautions on Using Lithium Battery Always keep the lithium battery beyond the reach of children. If swallowed, see a doctor immediately.

Clean the battery with a dry cloth to ensure it is perfectly connected.

Make sure the polarity is correct whenloading the battery.

To prevent short circuit, do not use metal tweezers to clip the battery.

Gently pull out the Battery Holder whilepressing the Stopper.

Put the button-type battery with mark(+) upward into the Battery Holder.

Replacing the Battery

Insert the Battery Holder into the Remote Control.

!

Maintenance

WarningNever use the fuse with the rated amperage more than that supplied to you r unit , otherwise i twil l damage the unit.

Warning!

Improper handling of the battery may

lead to explosion.

It cannot be charged ,disassembled or

thrown int o a fire.

!

01

7

Before You Start

Location of the Controls

The Expanding

The Whole6

34

06 CD/MP3/SD/USB

* Pressing in the monitor or on the main unit performs the same function.

Pause the PlaybackDuring CD/MP3/SD/USB playback, press to switch between play and pause. Note:

Press ( or ) on the remote control to perform fast rewind or fast forward.

Skip backward/forward/F.F/F.REW the playback

20

2 X 4 X 8 X 16X

Note:

* Pressing and holding on the main unit also performs the same function.

/

During CD mode, press the OSD button the display shows:

Single elapsed

Total

elapsed

Total

remain

Single remain

Note:

* This function is operated by using the remote control.

On Screen Display

Program PlayingDuring CD mode, press PROG, the TFTdisplays the program menu. Press NUMBER

BUTTONS to select the track Number andthen press to move the cursor to START,press ENTER to start program playing; move the cursor to EXIT and press ENTERto exit the program playing. Move the cursorto and press ENTER to go to the previous page; move the cursor to and press ENTER to go to the next page. During this process, press to cancel the program playing.

13

19

The function is only valid on the remote control.Note:

*

22

* Press CLEAR to clear the mistake input.23

Eject SD modePush SD card to eject it.During SD playing mode, to eject the SD card switch to Disc mode; if there is no disc in the main unit, it will switch to USB mode, or else, it will switch to Radio mode.During other modes, eject the SD card to keepthe previous mode.

Eject USBPull USB to eject it.During USB playing mode, to eject USB switch to Disc mode; if there is no disc in the main unit, it will switch to SD Card mode,or else, it will switch to Radio mode.During other modes, eject the USB to keepthe previous mode.

17 16 15

10 385

41

11

2

129 13

7

ronnie

ronnie

Push the

Before You Start01

8

The Base14

33

06CD/MP3/SD/USB

Selecting Tracks Fast

Note:

During MP3/SD/USB playback, pressto play the previous track, press to play the next track.During CD playback, first press to return to the beginning of the current track, press again within 3 seconds to play the previous track , press to play the next track .

99

9

99

* Pressing / button on the main unit or and in the monitor performs the same function. * In CD/MP3/SD/USB mode, you can press the track's Number or name to play.

4

Repeat PlayingDuring CD/MP3/SD/USB playback, press replay the current track, press it again to cancel this function.

RPT to 16


Note:

* The default setting is Disc Repeat.

* Press CLEAR to clear an input mistake.23

Number ButtonsPress one of the Number Buttons(0~9) to select a track to play automatically.

24

* Press track region and the screen shows the number keys, touch the number to select tracks.

Note:

Selecting Track

2


Note:


During CD playback, first press GOTO, and the TFT shows : disc go to:--:--, press your desired time of the playback by the num-ber buttons.Second press the GOTO button, track go to

:--:-- appears on TFT, also input your desirednumbers to play the current time of yourselection.During MP3/SD/USB mode, first press GOTO and the TFT shows:---. Then press the NUMBER BUTTONS to input the MP3/SD track's Number to play it; secondly press GOTO button, and the TFT shows : --:--, now input the desired time to play the current track at this point.

2

Stop PlayDuring CD/MP3/SD/USB playback, Press the to stop the playback.19

* Pressing in the monitor perform the same function.

Note:


During CD/MP3/SD/USB playback, press the RDM button on the remote control to play any track at random under the directory which you select. Press it again to return to normal playing.

17


Note:

2 EQ

12 USB Socket

11 SEL ButtonPress this button to set the sound effects.

14 Disc Loading Slot

17 LCD Screen

11 /MOD ButtonWhen the unit is off, press this button to turnon. In working status, briefly press to select radio mode or playback mode, press and hold it to turn the unit off.

3 BND/ (band selector/play, pause) Button During radio mode, press it to select the bands;During playback mode, press it to play orpause.

4 [ / ] / [ ]([Adjust frequency backward,Previous Track / press and hold to eject thedisc] / [Adjust frequency forward,Next Track])

5 AMS

6 Common SD Card Slot

7 EN+/ EN- (Increase volume / Decreasevolume)

8 REMOTE Infrared Sensor

9 RES Button

10 A/V IN

13 LOUD ButtonBriefly press this button to activate the loudnessfunction.

16 MUTE /ANG ButtonPress this button to mute, press and hold itto adjust the screen with / .

15 (release the front panel) Button

01

9

Before You Start

Remote Control

Tips:For more information as to replacing battery, please refer to Replacing the Battery on page 6.

32

06During CD playback, touching the screen shows the following menu:

CD/MP3/SD/USB Setup

Track region

During MP3/SD/USB playback, touching the screen shows the following menu:

Track region

Scan the tracks

CARDCARD It is SD status, touching the screen shows"SD" on the left upper corner of the display,where shows "USB" is in USB mode.Press the "SD" or "USB" is the same to the"DISC".

SELSEL Sound characteristicsDecrease volume level, adjust some items

Increase volume level, adjust some items

Play/pause

Stop

Previous track

Next trackDVD setup menu

MODE Mode selector

CD/MP3/SD/USB PlayInsert a CD/MP3 disc into the slot, the unit will play automatically.Remove the rubber plug USB or SDcard, then insert a USB or SD card which will be played automatically.If a disc/USB/SD card has been loaded, press SOURCE on the remote to switch to play, or back to play source to select menu, press DISC to play. Note:

*

12 6

Press MOD on the main unit to switch to DVDmode. When SD card and USB are inserted, press this key again and again to switch among SD card, USB and disc.

* Pressing to turn to mode switch.

MODE

01:18CD

01 Track02 Track03 Track04 Track05 Track06 Track

CDCDCDCDCDCD

Track 03/16

Track Region: Press this region and the screen shows the following menu:number keys appears, touch the number to select tracks. Touch the " X " to exit this menu.

MP3

MP3

MP3

MP3

MP3

MP3

MP3

DemoamourAutomaticBe natural_s_eCan you celebrclon_bing bing

00:00001/105

00:00

1 2 34 5 67 8 9-- 0 X

00:00001/105

00:00MP3

MP3

MP3

MP3

MP3

MP3

MP3

DemoamourAutomaticBe natural_s_eCan you celebrclon_bing bing

During CD playback, touching the screen's left upper corner will show "DISC". Press it to enter SOURCE menu, and select your desired mode or set it as page 19~20.

CD/MP3/SD/USB

1

2

3

4

5

7

6

8

18

19

20

21

22

23

24

25

2627

17

16

9

10

11

12

13

14 15

DISC

SD

* At present,our products can only support up to 16G on an SD card or USB.

Before You Start

10

011 SOURCE/PWR

4 AMS/MENU(Automatically Memory Storing/menu)

3 BAND/TITLE

5 LOC/SUB -T

6 ST/AUDIO (Stereo or Mono/Languageor Channel selector)

8

Slow Forward/Rewind)

7 ANGLE

13 PROG(Program playing)

12 [P/N]/ ( System adjusting/Capture)

9

ZOOM (zoom in or zoom out)

2 GOTO (playing time/track)

RPT(Repeat Playing)

15

RDM (Playing Tracks at Random)

16

VOL+/VOL-/SEL

14

OSDPress it to show the current information,press and hold it to show the current settinginformation.

30

25

SETUP

19

([F.R/ adjust frequency downwards]/[F.F/adjust frequency upwards] )

20

CLEAR

22

0~9 (Number) Buttons

23

24

18

(Stop Playing)

17

(Pause/Play)

26

21

(Previous/Next Track)

27

ENTER (Left/Right/Up/Down ENTER)

EQ

LOUD

Mute)

31

05DVD/VCD/MP4

---Preferences page--

Default Example showing how to re-set loaded factory setting:

(Press , or , then press ENTER)(Press--Preference Page--

Go To Preference Page Load Factory Setting

TV TypeAudio Subtitle Disc MenuParental Password Default

Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

Reset

01

11

Before You Start

AM Tuner Section

VCD/CD Player Section

530-1710 (KHz)(U.S.A.)

VCD Signal System AUTO/PAL/NTSC

General

FM Section

87.5-108(MHz)(Europe)

87.5-107.9(MHz)(U.S.A.)

10.7MHz

10dBuV

50dB

30dB 1KHz

40 -12KHzHz

Note:Due to continuous product improve-ment, specifications and design are subject to change without prior notice.

Specifications

Power Requirement 14.4V DC(11-16V allowable)

Load Impedance

7dBBass 100HzTreble 10KHz

Tone Controls

Approx.197x178 x 50mm (d/w/h)

Dimensions

Approx.1.76kgWeight

Tuning Range

IF Range

Usable Sensitivity (-30dB)

Signal-to-noise Ratio

Stereo Separation

Frequency Response

450KHzIF Range32dBuVUsable Sensitivity

(-20dB)

60dBSignal-to-noise Ratio55dB(1KHz)Separation0.3%Distortion

Max. Power Output 45W x 4

522-1620(KHz)(Europe)

Frequency Range(Optional)

(Optional)

DVD Player SectionDVD Signal System AUTO/PAL/NTSC

60dBSignal-to-noise Ratio60dBSeparation

2Channels

40Hz to 16KHzFrequency Response

30

05 DVD/VCD/MP4

---Preferences page--

Disc Menu Example showing how to set Disc Menu Language:


Go To Preference Page Preferred Menu Language


Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

Parental Example showing how to set parental control:


Go To Preference Page Set Parental Control


Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

Password Example showing how to set password, and the default password is 8888.


Go To Preference Page Change Password


Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

Change

2 3 4 5 6 7 8 Off

GPGPG 13PGRRNC 17Adult

English French Spanish Chinese Japanese

Russian Korean

Others

Installation02

12

Wiring Connection

Video Out 1

Rear RCA

Front RCA

Reverse Video Input

(Grey line with yellow head)(Light Grey line with red & white head)(Dark Grey line with red & white head)

(Brown line with yellow head)

The brown wire is connected with brake signal; for safety, the programs can be seen on the monitor after use the parking brake, but the menu and RCA output will function without being parkedIf you do not want to use this function, connect it with the negative pole.Do not connect the pink wire to the battery,otherwise it will use up the power of the battery.

Note:

*

Video Out 2 (Grey line with yellow head)Subwoofer (Brown line with

brown head)

1

Reverse Gear Orange

Red

Yellow

Black

Ignition Key

Battery +

Ground

Rear L Speaker

Front LSpeaker

Green/Black

Green

White/Black

White

Brown

Pink(optional)

Violet/Black

Blue

Violet

Grey/Black

Grey

Parking Brake

Lamp In

AntennaPower +

Rear R Speaker

Front RSpeaker

1

2

Output Plug(Male) 3

Output Socket(Female)

FILTER&FUSE

BOX

4

Fan Window

AUX Audio input (Black line with red & white head)

AUX Video input (Black line with yellow head)

3

2 4

Radio Antenna Receptacle

29

05DVD/VCD/MP4

---Preference page---

TV Type Example showing how to set TV type:


Go To Preference Page Set TV Standard


Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

PALAuto

Audio Example showing how to set Audio language:


Go To Preference Page Preferred Audio Language


Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

Subtitle Example showing how to set subtitle language:


Go To Preference Page Preferred subtitle Language


Auto Eng Eng Eng

--Preference Page--


Auto Eng Eng Eng

NTSC


Russian Others

Korean


Russian Korean

Others

02

13

Installation

Install the Front PanelPut notch (shown as picture) onto shaft , and then slightly press into the right side.B

A

Detach the Front PanelPress button in the upper rightcorner, and then the front panel will be folded down.

A

B

28

05 DVD/VCD/MP4

--Dolby Digital Setup--

Dual Mono Example showing how to set stereo mode:

(Press (Press , or , then press ENTER)--Dolby Digital Setup--

Dual MonoDynamic

Go To Dolby Digital Setup

Dual MonoDynamic

Dual Mono (1+1) Setup

Stereo L-Mono


R-MonoMix-Mono

Dynamic Example showing how to set dynamic range compression:

(Press (Press , or , then press ENTER)--Dolby Digital Setup--

Dual MonoDynamic

Go To Dolby Digital Setup

Dynamic

Set DRC off


1 41 23 4

Dual Mono

Installation

14

02Install the Unit

Bracket supplied to your car

Dashboard or Console

Select a position where the screw holes of the mounting bracket lied with the car and the of the main unit

fitted), and at 2 places on each fasten them to the car.

suppscrew holes become aligned

(are tighten the screws (see side). And then

4

Note: Outer Trim Frame Mounting Sleeve are not used

and for installation method.

Installation Method Installation using the screw holes at

sides of the unit.the

5

1

Bend these clawsoutward for a tight fit, if necessary.

To support the unit

Fire Wall

5

1

1

2

1

27

05DVD/VCD/MP4

--General Setup Page--

Captions Example showing how to set captions on/off:

(Press (Press , or , then press ENTER)--General Setup Page--

TV DisplayAngle MarkOSD LangCaptions Screen Saver

Wide On Eng Off On

Go To General Setup Page


TV DisplayAngle MarkOSD LangCaptions

Wide On Eng Off

Screen Saver On

Closed Captions

Off On

Logo Type Def

Screen Saver Example showing how to set the Screen Saver on/off:



Wide On Eng Off On




Wide On Eng Off On

Screen Saver

On Off Logo Type Def

Logo Type Example showing how to set the Logo Type:



Wide On Eng Off On




Wide On Eng Off On

Logo Type

Default Captured

Logo Type Def Logo Type Def

Logo Type Def

Logo Type Def

02

15

Installation

Detach the Unit

6

M5x5

7

Main Parts List

Mounting Sleeve x1 Rear Mounting Bolt x1 Harness Rubber x1 4 Screws Each

Outer Trim Frame x 1 Connecting Wire x1 Steel Bar x 1

8

Key x 2

1.Take out the Outer Trim Frame afterdetaching the front panel.

Detach the front panel before disassembl-ing the unit. F

efer to the Front

Panel .

or more details regarding this section, r Detach

2.Insert the keys supplied to the unit atboth sides of the unit (shown as illustrat-ed) until they click. Pulling the keys makes it possible to remove the unit from the dashboard.

26

05 DVD/VCD/MP4

Example showing how to set picture mode:

(Press (Press , or , then press ENTER)

Captions OSD Lang

OSD LangAngle Mark

TV Display

--General Setup Page--(Press , or , then press ENTER)(Press

Example showing how to set TV Display mode:TV Display



TV Display

Example showing how to set language mode:

(Press (Press , or , then press ENTER)

Screen SaverCaptions

TV DisplayAngle MarkOSD Lang

On Eng Off On

Set OSD Language

English

Angle MarkOSD LangCaptions Screen Saver

Wide On Eng Off On

Logo Type Def

TV Display

Captions Screen Saver

Wide On Eng Off On Def Logo Type

Normal/PSNormal/LBWide


Angle Mark


Wide On Eng Off On

Logo Type Def


Angle Mark

Screen Saver

Wide On Eng Off On

Logo Type Def


TV Display

OSD LangCaptions

On Off

OSD Lang

TV Display Wide Angle Mark On OSD Lang Eng Captions Off Screen Saver On Logo Type Def

--General Setup Page-- --General Setup Page--

Wide TV Display

Logo Type Def

Go To General Setup Page Set TV Display mode

Go To General Setup Page Set Angle Mark


English

Set OSD Language

Logo Type Def

Angle Mark On OSD Lang Eng Captions Off Screen Saver On

16

02 Installation

Cleaning the Connector

If the connector between the main unit and the front panel is dirty, it may result in the unit's ab-normal working condition. To avoid such pro-blems, please detach the front panel, and clean the connector with an swab. Gently clean and avoid damaging the connector.

alcohol

* For safekeeping, always shut down the engine and take out the key from the ignition before cleaning. Never allow your finger or any metal device to touch the connector directly.

Notes:

The main unit

The backside of the front panel

25

05DVD/VCD/MP4

Selecting ChannelDuring VCD mode, repeatedly press the AUDIO button to select from the following channels:

6

Stereo Mono Left

Mono Right

Select the corresponding channels to setthe different sound characteristics.

This function is operated by using the remotecontrol only.

Note:

*

Program PlayingDuring VCD mode, press PROG, the TFT displays the program menu. Press the NUMBER BUTTONS to select the trackNumber and then press to move the cursorto START, press ENTER to start program playing; move the cursor to EXIT and pressENTER to exit the program playing. Movethe cursor to and press ENTER to go to the previous page; move the cursor to and press ENTER to go to the next page.During this process, press to cancel the program playing.

13

19


*

22


*

Playing PBC (Menu)During VCD mode, first press TITLE, PBC playback starts and the menu of the

entire disc appears on the monitor, and then you can select your favorite track by using the Number Buttons. When a track is playing, you can press MENU to return to the menu if you would like to end the track and select others. To cancel PBC playing, press the TITLE button again.

424

3

This function is operated by using the remote control.

Note:

*

PBC playing confirms to version 2.0 of VCD/SVCD disc only.

3

Selecting MENUSelecting Menu: During DVD mode, press MENU to return to the root menu, all of the chapters will appear on the monitor. You can press the or buttons to select your desired chapter.

4

22 24

Selecting Title: During DVD mode, press TITLE to return to the title menu, all of the titles will appear on the monitor. You can also press the or buttons to select your desired chapter.

3

1

2

Under the DVD menu, touch the screen to selectitems.

Note:

*

2224

21

22

Press SETUP on the remote control or MENU on the main unit or on the monitor,main menu and sub-menu will appear on theTFT,press [ ][ ][ ][ ] on the remote control to select your desired items, then press ENTER.

* The selections are the preferred options that will be chosen if they are available on a disc. If the disc that is inserted does not have the preferred option then the discs own preference will be used. * Regarding SETUP MENU, please refer to the following pages for more details. * Some functions vary depending on the types of models or formats of the disc.

DVD SETUP MENU

Notes:

Press to go to the previous one, press SETUP or press [ ][ ][ ][ ] to move the cursoron , then press ENTER to exit the menu setup.

* Touch the screen to select menu, touch it again to select the item.

If the touch menu options are invalid or the discdoes not support touch-TITLE, that is thesame as the buttons on the remote control willdisplay on the screen. Press to go left, press to go right, press to go up, press to go down and press to ENTER.

*

22

ronnie

ronnie

you then

ronnie

ronnie

can

03

17

Common Operations

Reset the UnitWhen operating the unit for the first time or after replacing the car battery, you must reset the unit.

Note:

* When some errors occur on the display, you can also press the RES button to resume to normal, and it will erase the clock setting and some me- morized functions. * This function can only be operated by the main unit.

Release the front panel at first, and thenPress the RES button in the panel with a pointed object, (such as a ballpoint pen) to set the unit to initial status.

9

Press VOL+ button to increase sound level and press VOL- button to decrease sound level.

the

the

Volume Control

* Pressing on the main unit also performs the same function.

1515

Note:

7

Turning the Unit On/OffBriefly press PWR button to turn on the unit, press and hold to turn it off.

1

* Pressing /MOD button on the main unit also performs the same function.

Note:

To Select Source by Menu In any mode(except for DVD, SD, USB mode), press SRC on the monitor, the following menu will appear:

Setting the Sound Characteristics Repeatedly briefly press SEL button to select the mode in the following order:

desired

* Briefly pressing the button on the unit also performs the same function.

main

15

After selecting the desired mode, youadjust the current level by pressing the

.

can VOL

buttons

Note:

11

15

* Pressing EN+/EN- on the main unit also adjusts the current state.

TRE

BAL

BAS

VOL FAD

Press and hold ANG on the main unit until "Angle" appears, then press the / buttons to adjust the angle of the screen.

Adjust the Display

* Pressing and holding the ANG button on the remote with the button also perform the same function.

Note:

16

BT IPOD

TV

4

2522

05

24

DVD/VCD/MP4

During DVD mode, press the GOTO buttonto set the playing time, when the TFT dis-plays: title/chapter/audio/subtitle/angle

/title time/chapter time/repeat/time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press the NU-

MBER BUTTONS or [ ][ ] to set the current status.

2

22

22

During VCD mode, press the GOTO buttonto set the playing time, when the TFT dis-plays: /disc time/track time/repeat

/time disp. Press [ ][ ] to select the options, press ENTER to set the status. Then press NUMBER BUTTONS or [ ][ ] to set the current status.

track

2

22

22

24

Setting the Playback Time

During MP4 playback, first, press GOTO, and the monitor shows : ---, press your desired track by using the number buttons and press EN-

TER to set the status. Second, press the GOTO

button, and the monitor shows: -:--:--, input your desired time, then press ENTER.

2

* This function is operated by using remote control.

theNote:


Changing audio language (Multi-audio)DVDs can provide audio playback with different languages. With DVDs featuring multi-audio recordings, you can pressAUDIO to switch between language and audio systems during playback.

AUDIO 1 AUDIO 2 AUDIO 3...... Selection options switch as follows:


the

* This function only operates with DVDs featuring multi-audio recordings.* The number in the mark on a DVD's package indicates the number of recorded languages/audio systems.

2

Note:

6

Changing the subtitle language (Multi-subtitle)

With DVDs featuring multi-subtitle recor-dings. You can press SUB-T to switch between subtitle languages during playback.

Subtitles 1 Subtitles 2 Subtitles OFF

Selection options switch as follows:


the

* This function only operates with DVDs featuring multi-subtitle recordings.* The number in the mark on a DVD's package indicates the number of recorded subtitle languages.

2

Note:

5

......

ANGLE 1 ANGLE 2 ANGLE 3......

Changing the viewing angle (Multi-angle)With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, youcan press ANGLE to switch among vie-wing angles during playback.Selection options switch as follows:


the

* This function only operates with DVDs featuring multi-angle recordings.* The mark on a DVD's package indicates it features multi-angle scenes. The number in the mark indicates the number of angles from which scenes were shot.* It is invalid to press ANGLE during fast forward/fast reverse or pause.

3

7

Notes:

3

Press it to select your desired item.If you want to listen to music on an SD card,press SD on the monitor; if it did not enter into, that means the unit does not include the function or the SD Card is not inside.

* If the font is displayed in red, that means this function is null.

Note:

DISC USB SD

RADIO AV-R AV-FSET

EXIT

ronnie

ronnie

press the

ronnie

18

03 Common Operations

Mode Selector

* Briefly pressing MOD on the main unit also performs the same function.

Note:

Repeatedly briefly pressing the SOURCE button to select the different modes available.

1

Receptor on the main unit for the card remote control.

Infrared Sensor8

Press the button to shut off the sound output. And appears on the LCD. Press it again to resume to the previous volume level.

Mute Function

Pressing MUTE on the main unit also performsthe same function.

14

Note:

*

Insert an SD CardBe sure the unit is off, then press onthe unit and detach the front panel, insert a common SD card into the SD slot and the programs on the card will be played.

6

Eject a DiscPress the button to eject or insert a disc.

Note:


24

23

05DVD/VCD/MP4

Slow motion playbackDuring DVD mode, press to slow play. The speeds are as follows:

During VCD/MP4 mode, press to slow play. The speeds are as follows:


*

During DVD/VCD/MP4 mode, press ZOOM to increase the picture in size. The sizes are as follows, Each press increases the zoom until the maximum size is reached.

Increase the size of picture10

No Change


*

2X 3X 4X

To remove the image by pressing button.* 22

On Screen DisplayDuring DVD mode, press the OSD buttonand the display shows:

8

Title elapsed

Chapter

elapsed

Chapter

remaining

Title remaining

Display off

During VCD mode, press the OSD button and the display shows:

Single elapsed

Total

elapsed

Total

remain

Single remain

Display off

Note:

Display off


Single

elapsed

Single

remain

During MP4 mode, press the OSD button and the display shows:

04

19

Main Menu

19

Set up Main MenuPress SET on the menu, the monitor will display the main menu as follows:

You can touch a choice directly on the screen,including VIDEO, SYSTEM.AUDIO,

1.Audio AdjustAfter selecting AUDIO, the sub menu willappear as follows:

You can adjust BALANCE, FAD, BASS,TREBLE, LOUD and EQ.For example, press TREBLE, the settings menu will appear as follows:

Press and to adjust the size, then press BACK to save the settingand return to the previous menu.

on the screen

Note:

* Adjusting other options performs the same operation.* Pressing VOL+/VOL- on the remote or press EN+/EN- button on the main unit also performs the same function.

MAIN MENU

AUDIOVIDEOSYSTEM

EXIT

AUDIO SETUP

BALANCEFADBASS

BACK

LOUDEQ

TREBLE

AUDIO SETUP

BALANCEFADBASS

BACK

LOUDEQ

TREBLE

TRE 00

2.Video AdjustAfter selecting VIDEO, the sub menu willappear as follows:

You can adjust BRIGHT, CONTRAST,COLOR and HUE.For example, press CONTRAST, the settings menu will appear as follows:

VIDEO SETUP

BRIGHTCONTRASTCOLOR

BACK

HUE

VIDEO SETUP

BRIGHTCONTRASTCOLOR

BACK

HUECON 30

Press and to adjust the size, then press BACK to save the settingand return to the previous menu.

on the screen

Note:

* Adjusting other options performs the same operation.* Pressing VOL+/VOL- on the remote or press EN+/EN- button on the main unit also performs the same function.

05

22

DVD/VCD/MP4

During DVD/VCD/MP4 playback, press to switch between play and pause; During stop mode, press this button to resume playback mode.

Pause the Playback

18

Note:

* Pressing in the monitor or on the main unit performs the same function.

Stop the playbackDuring DVD/VCD playback, first press, , then press or on the remote control to replay; press twice to stop playing completely, then the unit will return to the beginning of the current track.During MP4 playback, press first, thenpress to return to the beginning of thecurrent track.

* Pressing in the monitor performs the same function.

Note:

Repeat PlayingDuring DVD playback, press

ing RPT on

the remote control to perform the replayfunction as follows:

* This function is only valid on the remote control.

16

Note:

Chapter Title Off

During VCD/MP4 playback, press RPT on the remote control to TRACK REPEAT.


During DVD/VCD/MP4 playback, RDM button on the remote control to play

random under the directory which you select. P return to

press the any track at

ress it again to normal playing.

17


Note:

Note:

Press ( or ) on the remote controlto perform fast reward or fast forward. Each pressing will change as follows:

Skip backward/forward/F.F/F.REW the playback

20

16X 2X 4X 8 X

During DVD/VCD mode, press P/N on the remote control to set the TV standard to PAL or NTSC or AUTO system.

System Switch12

NTSC

PAL

AUTO


/

The function can be operated by selecting theDVD MENU SETUP.

Note:

*

Main Menu04

20

3.System AdjustAfter selecting SYSTEM, the sub menu willappear as follows:

In this menu you can adjust CLOCK SYS,CLOCK ADJ, KEY BEEP, REV POLASCREEN .AD

PREFERENCE

CLOCK SYS

KEY BEEP

BACK

REV POLA

CLOCK AD J

SCREEN ADJ

J

Clock System

Press CLOCK SYSTEM on the monitor toset 12 HOUR or 24 HOUR in this menu.

PREFERENCE

CLOCK SYS

KEY BEEP

BACK

REV POLA

CLOCK AD J

SCREEN ADJ

12 HOUR24 HOUR

Clock Adjust

Press CLOCK ADJ on the monitor toadjust the clock.

PREFERENCE

CLOCK SYS

KEY BEEP

BACK

REV POLA

CLOCK AD J

SCREEN ADJ00:00:00

Key Beep

In this menu you can adjust KEY BEEP, press it on the monitor and select ON or OFF,the default setting is ON, it means when you press the keys, they sound.

PREFERENCE

CLOCK SYS

KEY BEEP

BACK

REV POLA

CLOCK AD J

SCREEN ADJ

ONOFF

Setting REVERSE POLA in this menu. The signal is +12V when you back a car, please press BATTERY in the monitor; if the signal is 0V, please press GROUND.

Reverse PolaPREFERENCE

CLOCK SYS

KEY BEEP

BACK

REV POLA

CLOCK AD J

SCREEN ADJ

GROUNDBATTERY

Adjust Screen

Press ADJ to display the above menu, there is a square button in the top left corner . Press the square button at place ,then the button will move to placepress it at place , it will move to place , then place .

SCREEN

,

ADJUST SCREEN

SAVE

++

+ +

05

21

DVD/VCD/MP4

During DVD/VCD/MP4 playback, touch the screen anywhere shows the following menu:

DVD/VCD/MP4 Setup

Play/pauseStop Decrease volume levelIncrease volume levelDVD setup menuMode selector

DVD/VCD/MP4 PlayInsert a disc into the slot , the unit will automatically switch on, if a disc is loaded, press SOURCE to start the playback. If the unit is in another menu, press DVD to switch to disc play.

Press MOD on the main unit to switch to DVDmode. When SD card and USB are inserted, press this key again and again to switch among SD card, USB and disc.

14

Note:

*

Pressing in the monitor performs the same function.

*

Selecting Tracks Fast9

Note:

During DVD/MP4 playback, pressto play the previous track, press to play the next track.During VCD playback, first press to return to the beginning of the currenttrack, press again within 3 secondsto play the previous track , press toplay the next track .

9

9

99

* Pressing / on the main unit or press left/right twice continuously in the monitor also performs the same function.

4

Note:

* Press right screen to play the next track( shows), press left screen to play the previous track( shows).

DISC

DISC Press it to enter the SOURCE menu,and select your desired mode orset it as page 19~20.

Press one of the Number Buttons(0~9)

to select a track, it will be played auto-matically.

24

*

Number Buttons

Note:


1 2 34 5 67 8 9-- 0 X

Press this region and the screen shows the following menu: number keys appears, touch the number to select tracks. Touch the " X " to exit this menu.

Track region

ronnie

ronnie

When an

ronnie

ronnie

ronnie

on

Date post:	11-Mar-2020
Category:	Documents
Upload:	others
View:	8 times
Download:	0 times

CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH USB …CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH USB PORT English...

Documents