+ All Categories
Home > Documents > CATALOG CABLINE-UY E - I-PEX · 2020-05-25 · CATALOG_CABLINE-UY_E.pdf Author: I-PEX Created Date:...

CATALOG CABLINE-UY E - I-PEX · 2020-05-25 · CATALOG_CABLINE-UY_E.pdf Author: I-PEX Created Date:...

Date post: 04-Aug-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
6
CABLINE ® - UY 2-way plug options (Cable plug and FPC SMT plug*) Small & low height design, suitable for narrow spaces SMT plug* can be used for digital signal and multi-line RF signal 2-way plug options (Wire plug and FPC SMT plug) Mating type Right angle vertical Wire (FPC) pitch (mm) 0.35 Board pitch (mm) 0.35 Mated size (mm) Height 0.76 +/- 0.06 Width Formula Cable plug : 2.15 + (0.35 * ?p) SMT plug : 2.02 + (0.35 * ?p) Depth Cable plug : 3.10 SMT plug : 2.42 Wiping length (mm) 0.10 Applicable wire for Cable plug (AWG#) Micro-coax for signals 45ohm : #40 or smaller 50ohm : #42 or smaller Twincoax - Discrete #36 or smaller Contact point - Performance (Reference only) USB 3.1 Gen 1 (5 Gbps) V-By-One HS 1.4 (4 Gbps) HDMI 1.3 (3.4 Gbps) (Cable plug & SMT plug*) Pin counts: Range Up to 25p Available Cable plug : 5, 10p SMT plug : 5p *Please inquire for pin counts not listed or outside of the pin count range. *CABLINE-UY SMT plug is sold and supplied by the I-PEX licensed manufacturer. The same receptacle can be mated to Micro-coaxial cable plug or FPC plug Receptacle Cable Plug SMT Plug* Flexible Micro-coaxial cable harness is suitable for small applications with a hinge design. *CABLINE-UY SMT plug is sold and supplied by the I-PEX licensed manufacturer. 0.35 mm pitch, Right angle vertical mating type Micro-coaxial Cable & FPC Connector Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0 SMT plug* can be used for digital signal and multi-line RF signal Small and low height design, suitable for narrow spaces 0.82 mm max. 5p : 3.90 mm 10p : 5.65 mm 3.10 mm 0.82 mm max. 5p : 3.77 mm 2.42 mm Size comparison image of 5p plug with a one-cent coin Connector mated size SMT Plug* 3.77 mm Cable Plug 3.90 mm Cable plug mated size SMT plug* mated size 19.05 mm 10.0 mm Fewer connector components Smaller harness space G S G S G S G (Line layout image) CABLINE ® -UY SMT plug* Example image of THREE RF lines using ONE 5-pin SMT plug FPC harness SMT type Micro-RF connector
Transcript

CABLINE®- UY2-way plug options (Cable plug and FPC SMT plug*)Small & low height design, suitable for narrow spacesSMT plug* can be used for digital signal and multi-line RF signal

2-way plug options (Wire plug and FPC SMT plug)

Mating type Right angle verticalWire (FPC) pitch (mm) 0.35

Board pitch (mm) 0.35

Matedsize

(mm)

Height 0.76 +/- 0.06Width

FormulaCable plug : 2.15 + (0.35 * ?p)

SMT plug : 2.02 + (0.35 * ?p)

Depth Cable plug : 3.10SMT plug : 2.42

Wiping length (mm) 0.10

Applicablewire for

Cable plug(AWG#)

Micro-coax for signals

45ohm : #40 or smaller50ohm : #42 or smaller

Twincoax -Discrete #36 or smaller

Contact point -

Performance(Reference only)

USB 3.1 Gen 1 (5 Gbps)V-By-One HS 1.4 (4 Gbps)

HDMI 1.3 (3.4 Gbps)

(Cable plug & SMT plug*)Pin counts:Range Up to 25pAvailable Cable plug : 5, 10p

SMT plug : 5p*Please inquire for pin counts not listed or outside of the pin count range.*CABLINE-UY SMT plug is sold and supplied by the I-PEX licensed manufacturer.

The same receptacle can be mated to Micro-coaxial cable plug or FPC plug

Receptacle

Cable Plug SMT Plug*

Flexible Micro-coaxial cable harness issuitable for small applications with a hinge design.

*CABLINE-UY SMT plug is sold and supplied by the I-PEX licensed manufacturer.

0.35 mm pitch, Right angle vertical mating typeMicro-coaxial Cable & FPC Connector

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

SMT plug* can be used for digital signal and multi-line RF signal

Small and low height design, suitable for narrow spaces

0.82 mm max.

5p : 3.90 mm10p : 5.65 mm3.10 mm

0.82 mm max.

5p : 3.77 mm 2.42 mm

Size comparison image of 5p plug with a one-cent coinConnector mated size

SMT Plug*

3.77 mm

Cable Plug

3.90 mm

Cable plug mated size SMT plug* mated size

19.05 mm

10.0 mm

Fewer connector componentsSmaller harness space

G S G S G S G(Line layout image)

CABLINE®-UY SMT plug*Example image of THREE RF lines using ONE 5-pin SMT plug FPC harness

SMT type Micro-RF connector


CABLINE®-UYComponent Parts Detail

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Component Parts:Connector parts Plug parts

PLUG HOUSING ASSEMBLY

PLUG SHELL-ACABLE PLUG

RECEPTACLE


Plug for Cable Assembly :

Rev.1Rev.3

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Rev.3


Plug Housing Assembly :

Rev.1

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Plug Shell-A :

Rev.2


Receptacle Assembly :

Rev.2Rev.3

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Rev.3


Rev.1Rev.3

I-PEX, MHF, CABLINE, NOVASTACK, EVAFLEX, MINIFLEX, ISH, IARPB, IASLP, ESTORQ, i-Fit and ISFITare registered trademarks of I-PEX Inc. Please note that the contents in the catalog might bechanged without prior notification. I-PEX Inc. assumes no responsibility for any inaccuracies orobligation to update Information on these documents. Please be sure to read and understand thelatest "Precautions for Use" and "Instruction Manual" before you use our products. We shall not beresponsible for any defects, damages or troubles in case you use our products without followingthe precautions for use. Please feel free to contact our sales representatives when you use ourproducts for any applications that require very high reliability and safety, or that relate to humanlife (ex. nuclear power control, aerospace, transportation, medical equipment, safety equipment etc.).

Contact your sales representative for more detailed information. [ i-pex.com ]

Copyright © I-PEX Inc. 2020. All rights reserved.

202008R0


Recommended