Date post: | 22-Jan-2015 |
Category: |
Business |
Upload: | british-embassy-madrid |
View: | 367 times |
Download: | 1 times |
Wood Group Renewables
February 2012
Introduction to the Group
38,000
employees
Operations in
50 countries$5.5bn sales
John Wood Group PLCServicing Energy Industries Worldwide
A Global Market Leader in:
• Engineering and Project Management for
Oil and Gas and Renewable Energy
Developments
• Field Operation and Maintenance
• Industrial Turbines
Wood Group Renewables
Engineering – Market Leading Positions
• 40 years of unrivalled offshore expertise
• We have worked on
– 75% of GOM deepwater facilities
– 30% of deepwater facilities worldwide
• We have engineered the WORLD’S DEEPEST
– TLP - Magnolia 4,744’
– SPAR – Perdido 7,800’
– Production platform – Independence Hub
Semi 7,920’
• LARGEST independent SUBSEA technology
group of its kind in the world
• Engineered more than 500,000km of cables &
pipelines
• Engineered, managed or appraised OVER
HALF of all subsea development worldwide
• We have DESIGNED and PROJECT MANAGED
subsea developments in water depths up to
3,000 METRES
• Experienced working in HIGH ENERGY areas –
large waves, currents, cyclones, etc
Structures & topsides Subsea solutions
• Involvement in access of 800 RENEWABLE
ENERGY projects to date
• Assessed OVER 60,000 MW of renewable
energy development internationally
Health, Safety & Environment
“Maintaining the highest standards in safety across
all of our operations worldwide at all times is of paramount importance”
As expressed in our Vision for HSE Excellence,
as an integral part of our business we will
Maintain a healthy workplace
Prevent accidents
Minimise adverse environmental impact
* Total Recordable Case Frequency per million man hours
7.15.8
4.6 4.2 3.9 3.33 3.26 2.94 2.49
2003 2004 2005 2006 2007 2008 2009 2010 2011 Oct
Safety Cases*
5
Wood Group Renewables
Wood Group Renewables - Capabilities
6
Wood Group Renewables
Offshore Project Development
7
Feasibility FEED Detail Design
Measurement
Studies
Concept
Modelling
Layout & Optimisation
Construction Management
& Installation
Foundation & Offshore
Structural Design
Cable Routing & Landfall
Project Management
& Construction
Project Management
Wood Group Renewables
Project Lifecycle – Influence on Expenditure
& Concepts
Advisory Services
INF
LU
EN
CE
EX
PE
ND
ITU
RE
S
Major Influence Decreasing Influence
Project Management
Measurement & Analysis
Construction Management
Concept, FEED and Detailed Design
Low Influence
ENGINEER PROCURE CONSTRUCTSTART UP &
COMMISSIONINGPLAN SELECT DEFINE
Wood Group Renewables
Feasibility Studies
Feasibility & Advisory Services
Due Diligence for lenders, investors and developers
Market and strategy studies
Contract and programme review
Financial modelling and cost assessment
Technology assessments
Permit and tariff analysis
Bank-grade energy yield analysis
Met mast & Lidar specification, installation, data acquisition & management
Modelling including CFD
Wind farm layout design & optimization
Uncertainty analysis & mitigation
9
Wood Group Renewables
FEED & Detail Design
10
Field & device assessment
Concept, FEED & detailed engineering
Foundation and offshore substructure
design
Cable routing & landfall design
Horizontal directional drilling (HDD)
design
Materials engineering & specification
Design verification, technical advisor &
liaison
Wood Group Renewables
Project Management & Construction
Turbine and key component assessment and selection
EPCM (incl Installation Management)
Commissioning
Cost estimation & management
construction management
HSEQ
QA/QC
11
Wood Group Renewables
Marine Energy
Experienced in design for high energy environments
– Landfalls
– Cyclone areas
– Straits of Gibraltar
– Wave & Tidal projects
World leading geotechnical/rock interaction FE capabilities
3D CFD seabed modelling capability to fully understand fluid flow
World leading project experience
– Wave Hub – World’s largest wave farm
– Sound Of Islay – World’s first tidal array
Able to provide rock dump sizing & assessment of cable protection methodologies
Installation & construction methodologies
12
Wood Group Renewables
Reasons for Rock Dumping
Finertia
Fdrag
Flift
Wsub
Friction
Stability
wave
&
current
Vortices
Freespans
Wood Group Renewables
Cable Protection
• Rock dump may be needed for
– On-bottom stability
– Freespan correction
– Cable protection
– Scour protection
– Protection/stabilisation
of structures
• Experience with
– Mattresses
– Uraduct
– Cast Iron Pipe
– Cable trenching tools
Wood Group Renewables
Rock Dump Design Experience
• Experience in high energy environments
– Wave & tidal energy projects
– Cyclone conditions in Perth
– Straits of Gibraltar
– Landfalls throughout the world
Severe Environments
Wood Group Renewables
Offshore Logistics
40 years experience in managing and
delivering offshore maintenance
campaigns
Utilise offshore knowledge to identify
the best methods for deploying
personnel to site
Offshore Interventions are expensive
and potentially dangerous
Planning and training are essential to
the success of offshore interventions
20
Wood Group Renewables
Wood Group Renewables - Key Projects
25
Wood Group Renewables
Relevant ExperienceProject Description
Development of Wave Hub
Project scope
• Conceptual System Design
• Cost Estimating
• Detailed design of subsea cable,
connections, transformers, grid connection
• Procurement and fabrication management
• Project Management
• Construction Supervision
Achievements
Saved client ~£20m (60% of budget) compared to initial bids
Wood Group Renewables
Relevant Experience
Project Description
Kawasaki Tidal Device Design
Project scope
•Conceptual design of foundation and
substructure
•Mooring Analysis
•Cost estimate
•Manufacture review
•Review of installation and O&M strategiesAchievements
Allowed Kawasaki to generate a
robust business case for their
design.
Wood Group Renewables
Case Studies – Wood Group Kenny
MORLMoray Firth Offshore Wind Farm
Gamesa TechnologyOffshore WTG Safety and Risk
RWEGwynt y Mor
Concept engineering of the
MORL 1.5GW Round 3 Zone
including cable routing,
construction, ports and harbours,
access solutions and operations
& maintenance
HSE and lifecycle risk advice to
support development of
Gamesa’s 5MW and 7MW
offshore wind turbines for UK
projects
Review and recommendation of
internal and external cable entry
systems for the proposed WTG
structures including design,
installation, maintenance, cable
protection, material selection and
corrosion protection
28