CONCRETE MIXERS

CO

NC

RE

TE M

IXE

RS

1

CO

NC

RE

TEM

IXE

RS A world leader in concrete pump technology now brings you the

ultimate in mixing and delivery vehicles. Our Pro Series standard ready mix truck and Bridge Maxx Series booster axle mixers reach new levels of durability and performance through innovative design.

Our engineers started with no legacy models and no preconceptions. They designed these mixers strictly for the attributes customers prize most:

DISCOVER NEW HEIGHTS OF

DURABILITY AND PERFORMANCE

• Durability for years of reliable performance

• High payloads and productivity

• Reliable controls with redundant backups ensure payload will always be delivered

• Ease of use and serviceability

With exclusive Ergonic® Mix Control (EMC), both Pro and Bridge Maxx Series mixers deliver the full power of technology, from the batch plant to the jobsite, for efficient, high-quality performance on every project.

EMC is smart and capable – and fully programmable to suit your specific needs. It can operate in either a manual or automatic mode.

The control seamlessly balances engine speed with hydraulic pump output to achieve the optimum drum speed, reducing drum wear and saving fuel. Minimum and maximum drum speeds are programmable to batch plant preference. The user selects the drum speed, and EMC does the rest. Guesswork is eliminated with a display that shows actual drum speed at all times.

ERGONIC ® MIX CONTROL: SMARTER

PERFORMANCE THROUGH TECHNOLOGY

Drum speed is limited to 1 rpm when the vehicle is traveling above a specified speed limit (adjustable from 5 to 10 mph), improving highway safety and preventing accidental discharge. A manual mode lets skilled operators exert the direct control they’re used to, while programmed interlocks make sure the mixer always operates safely and efficiently.

The closed-loop drum control constantly and precisely monitors drum speed comparing actual versus demanded speed. Fuel economy is maximized by keeping PTO speed to the minimum required under any condition. A dash-mounted monitor shows key operating parameters along with warning lights and alarms. The ergonomically located joystick and illuminated pushbutton controls are at the driver’s fingertips and easy to operate.

2 3

PRO SERIES STANDARD FEATURES

BODY• AR 200 steel drum

• Tubular pedestal base frames – front and rear

• Frame-mounted chute extensions

• 7-position, spring loaded chute pin

• Hydraulic chute brake

• Hydraulic double-acting chute lift

• Greasable rollers with pressurized seal

• Polyethylene black fenders

• Side frame-mounted water tank

• Tank-mounted water sight gauge

HYDRAULICS• Feedback control 90cc hydraulic pump

• Hydac EL3 hydraulic cooler

ELECTRICAL• Exclusive Putzmeister Ergonic Mix Control with weatherproof

rear keypad and in cab display

• LED stop, turn, tail, backup and work lights

DRUM• 10 yd3 Capacity

• 11 yd3 Capacity

• 47" Paver opening

• 1/4" Fins

• 1/4" Shell

BODY• 60" Lined main chute

• Hydraulic lift charge hopper, platform accessible

• Drop charge hopper

• Lined collection hopper

• Centralized lubrication for rollers

• Aluminum or polyethylene lined extension chute

• Polythylene paintable fenders

PRO SERIES OPTIONS

PRO SERIES STANDARD 10.5

Drum

Capacity 10.50 yd3

Head Diameter 78"

Opening Diameter 43"

Head Thickness 1/4"

Shell Thickness 3/16"

Fin Thickness 3/16”

Surge Fin Thickness 3/16" bolt-in

Chutes

Main 60" steel

Fold-over 24" steel

Extension 48" steel

General Specifications

Charge Hopper 45"

Rollers 8-3/8" x 4-3/4"

Work Platform 5.6 ft2

Water Tank 125 gal steel

Hydraulic Specifications

Transmission ZF Ecomix II CML 10

Reservoir 7 gal steel

HYDRAULICS• Manual control 90cc pump

• P7300 Transmission

• PK7500 Transmission

• PMB 7.1R Transmission

WATER TANKS• 80 gal steel or aluminum

• 100 gal steel or aluminum

• 150 gal steel or aluminum

• Overhead mounting

• Analog or digital water metering

ELECTRICAL CONTROLS• Tethered pendent

• Radio remote

• Auxilary keypad

• Auxilary display

• Remote slump meter

• Manual drum control

BRIDGE MAXX SERIES STANDARD FEATURES

BODY• AR 200 steel drum

• Tubular pedestal base frames – front and rear

• Rear pedestal chute extension mounting

• 7-position, spring loaded chute pin

• Hydraulic chute brake

• Hydraulic double-acting chute lift

• Greasable rollers with pressurized seal

• Polyethylene black fenders

• Cross mount water tank

• Tank-mounted water sight gauge

BOOSTER• Tubular ladder-type subframe

• Hendrick steerable axle

HYDRAULICS• Feedback control 90cc hydraulic pump

• Hydac EL3 hydraulic cooler

ELECTRICAL• Exclusive Putzmeister Ergonic Mix Control with weatherproof

rear keypad and in cab display

• LED stop, turn, tail, backup and work lights

DRUM• 10 yd3 Capacity

• 11 yd3 Capacity

• 43" Opening

• 1/4" Fins

• 1/4" Shell

BODY• 60" Lined main chute

• Hydraulic lift charge hopper, platform accessible

• Drop charge hopper

• Lined collection hopper

• Centralized lubrication for rollers

• Aluminum or polyethylene lined extension chute

• Polythylene paintable fenders

• Frame mounted extension chute

BRIDGE MAXX SERIES OPTIONS

BRIDGE MAXX SERIES STANDARD 10.5

Drum

Capacity 10.50 yd3

Head Diameter 78"

Opening Diameter 47" paver

Head Thickness 1/4"

Shell Thickness 3/16"

Fin Thickness 3/16”

Surge Fin Thickness 3/16" bolt-in

Chutes

Main 60" steel

Fold-over 24" steel

Extension 48" steel

General Specifications

Charge Hopper 45"

Rollers 8-3/8" x 4-3/4"

Work Platform 3.6 ft2

Water Tank 125 gal steel

Booster Specifications

Axle 13,000 lbs

Tires 11x22.5

Hydraulic Specifications

Transmission ZF Ecomix II CML 10

Reservoir 7 gal steel

HYDRAULICS• Manual control 90cc pump

• P7300 Transmission

• PK7500 Transmission

• PMB 7.1R Transmission

WATER TANKS• 80 gal steel or aluminum

• 100 gal steel or aluminum

• 150 gal steel or aluminum

• Overhead mounting

• Side frame mounting

• Analog or digital water metering

ELECTRICAL CONTROLS• Tethered pendent

• Radio remote

• Auxilary keypad

• Auxilary display

• Remote slump meter

• Manual drum control

Fully hydraulic control enhances reliability and reduces maintenance. Hydraulic system temperature is continuously monitored and heated or cooled for optimal lubrication, oil life, and efficiency.

The ZF Ecomix II CML 10 mixer transmission cures dynamic seal failures, has larger bearing surfaces, offers greater tolerance for frame flex, and operates at lower rpm, reducing internal wear. It is structurally stronger yet lightweight, affording you more payload capacity. Designed with an emphasis on serviceability, the motor and gearbox are modular, contain fewer parts, and are easily accessed for service.

The Pro Series features a 5.6 ft2 platform, and the Bridge Maxx Series has a 3.6 ft2 platform – the industry’s largest, providing more work space for cleanout and other tasks.

HYDRAULIC CONTROL

TOUGHER, LIGHTER TRANSMISSION

LARGE PLATFORM

Made from AR 200 steel, the drum has a 1/4-inch-thick one-piece pressed and dished head 78 inches in diameter. The drum body is 3/16-inch thick with one-piece pressed blades and weep holes for easy cleaning.

Both models are available with a standard 43-inch discharge opening and a 47-inch paver discharge opening – the industry’s largest – for quicker charging and discharging.

The 78-inch drum head allows placement of the center of gravity for maximum loading of front axle. Drum, pedestal and hydraulics design allows precise placement for optimum weight distribution: center of gravity forward on three-axles, maximum booster load on four axles, and maximum pusher loads on five axles or more.

The TimkenTM-approved roller bearing system is greaseable, rebuildable, and sealed for long, trouble-free performance. A pressurized grease cavity and retained labyrinth seals eliminate contamination.

The Bridge Maxx Series booster axle has a hydraulic suspension powered by a pressure-compensating variable-displacement pump for excellent axle loading consistency, reduced frame stress, and safer highway travel.

DURABLE DRUM

LARGE DRUM OPENING

OPTIMIZED CENTER OF GRAVITY

SEALED ROLLERS

IMPROVED BOOSTER AXLE

The tubular pedestal base frame of the Pro and Bridge Maxx Series provides strength, lower weight and better load distribution, while an enhanced high-strength tubular ladder subframe design on the Bridge Maxx Series resists torsion for a more stable truck. This construction uses fewer weldments, reducing cost and enhancing parts interchangeability.

HIGH-STRENGTH MODULAR CONSTRUCTION

DE SIGNED TO L A ST | PUTZMEISTER TOUGHENED THESE MIXERS SO THEY ENDURE WHERE OTHERS FAIL

8

6

9

12

5

1110

4

7

© Putzmeister America, Inc. 2013 Printed in the USA (2.51301)RM 4456 US

Putzmeister America, Inc. Phone (262) 886-3200

1733 90th Street Toll-free (800) 884-7210

Sturtevant, WI 53177 USA Fax (262) 884-6338

PutzmeisterAmerica.com pmr@putzam.com

Authorized Distributor

BRIDGE MAXX SERIES

PRO SERIES

Photos and drawings are for illustrative purposes only.

All Putzmeister Concrete Mixers are backed by Putzmeister America’s worldwide Customer Support Group and distributor network.

Find out how Putzmeister Concrete Mixers can enhance your efficiency and sharpen your performance.

Phone: (262) 886-3200Toll-free: (800) 884-7210

QUALIT Y SERVICE AN Y WHERE

14

13