Date post: | 02-Jun-2018 |
Category: |
Documents |
Upload: | parveen-jaat |
View: | 236 times |
Download: | 0 times |
of 17
8/11/2019 Ddd Dddd Cccc Ccc
1/17
TRAINING REPORTON
AUTOCAD & SOLIDWORKS
Submitted By:-
Rohit Kumar1811542
8/11/2019 Ddd Dddd Cccc Ccc
2/17
AutoCAD, a product from Autodesk is a
Computer Aided Design (CAD) program
used by just about every Engineering and
Design office in the world.
Autodesks is the industrial leader in CAD
packages, used by Civil Engineers,
Mechanical and Electrical Engineers,Aeronautical Engineers plus many other
disciplines.
Introduction
8/11/2019 Ddd Dddd Cccc Ccc
3/17
Fig- GUI of AutoCAD
8/11/2019 Ddd Dddd Cccc Ccc
4/17
Circle
Arc
Line
Ellipse
Move
Erase Rotate
Mirror
Polygon
Rectangle
Array
Trim
Extend
Break
Fillet Chamfer
Multi line
Ray
Commands
8/11/2019 Ddd Dddd Cccc Ccc
5/17
Distributes object copies into any combination of rows,
columns and levels.
Rectangular Array:-
8/11/2019 Ddd Dddd Cccc Ccc
6/17
Evenly distributes object copies along a path or a portion of
a path.
Path Array
8/11/2019 Ddd Dddd Cccc Ccc
7/17
SolidWorks is a 3D mechanical CAD program
which was developed by SolidWorks Corporation,
headquartered in USA , a subsidiary of Dassault
System.
SolidWorks provides a full range of integrated
modeling, simulation, visualization;
communication and validation tools that
production designers need to develop better
products faster and at low cost.
SolidWorks
8/11/2019 Ddd Dddd Cccc Ccc
8/17
Part Modeling
Assembly modeling
Surface modeling
Sheet Metal Design
Drawing
Modules in Solid Works
8/11/2019 Ddd Dddd Cccc Ccc
9/17
The sketch fillet tool trims away the corner at the
intersection of two sketch entities to create a tangent arc.
Sketch Fillet
8/11/2019 Ddd Dddd Cccc Ccc
10/17
The Sketch Chamfer tool applies a chamfer to adjacent
sketch entities.
Sketch Chamfer
8/11/2019 Ddd Dddd Cccc Ccc
11/17
The Lofted command creates a feature by blending more
than one similar or dissimilar sections together to get a
free form shape
Lofted Boss/Base Feature:-
8/11/2019 Ddd Dddd Cccc Ccc
12/17
Rib adds material of a specified thickness, in a specified
direction between the contour and an existing part.
Creating Rib Feature
8/11/2019 Ddd Dddd Cccc Ccc
13/17
The Revolved Feature creates
the Boss/Base features by
revolving the sketch about a
revolution axis.
Revolved Boss/Base Feature
8/11/2019 Ddd Dddd Cccc Ccc
14/17
The Swept Boss/Basecommand is used to create a
feature by moving a closed profile along an open or a
closed path.
Swept Boss/Base Feature
8/11/2019 Ddd Dddd Cccc Ccc
15/17
Advantages of AutoCAD & SolidWorks
Engineering Drawings developed manually had more
scope of errors. Overruling this shortcoming, drawings
developed by AutoCAD are precise and accurate up to a
greater extent.
Productivity is boosted by a CAD program enabling you to
easily draw polygons, ellipses, multiple parallel lines and
multiple parallel curves that comprise a design.
8/11/2019 Ddd Dddd Cccc Ccc
16/17
Various automatic features like fillets and chamfers helps
in increasing the speed of drawing.
Copy, Rotate and Mirror facilities also come very handy
while drawing symmetrical parts.
8/11/2019 Ddd Dddd Cccc Ccc
17/17
THANK YOU !