+ All Categories
Home > Documents > Easy commissioning SIP Trunks and Endpoints Fax...

Easy commissioning SIP Trunks and Endpoints Fax...

Date post: 12-Apr-2018
Category:
Upload: lephuc
View: 215 times
Download: 1 times
Share this document with a friend
4
Easy commissioning Very fast startup – small, manageable number of configuration parameters Easy administration via browser in Lync-styled control panel Simplified certificate creation Preset default routing SIP Trunks and Endpoints Preconfigured list of SIP Trunk providers eliminates consuming integration test Integration of non-Microsoft certified SIP endpoints, such as ATA adapters, SIP-enabled DECT - and wireline devices Built-in emergency routing enables telephony without associated Lync or SBA Fax Receiving Receive and forward incoming faxes to the mailbox of the associated e-mail address Assignment of e-mail address via LDAP LDAP eliminates user configuration Connect local faxes via ATA adapter Presence synchronisation Presence status of locally connected devices is shown in Skype for Business Skype for Business users can see if someone is speaking on their DECT, SIP or analog telephones Busy on Busy for registered devices + Expand Skype for Business to Enterprise Voice + Easy and fast commissioning in record time! + Integration of standard SIP devices and SIP Trunks + Also for hybrid cloud configuration + No user administration - low TCO + Microsoft® - BASIC Lync certification Compact SIP-Gateway for Microsoft® Skype for Business™ Unified Communications UCBox Gateway SIP BRESSNER Technology GmbH Phone: +1-561-953-1866 E-Mail: [email protected] www.bressner.de Last Update: Juli 2016 Specifications subject to change
Transcript

Easy commissioning

■ Very fast startup – small, manageable number of configuration parameters■ Easy administration via browser in Lync-styled control panel■ Simplified certificate creation■ Preset default routing

SIP Trunks and Endpoints

■ Preconfigured list of SIP Trunk providers eliminates consuming integration test■ Integration of non-Microsoft certified SIP endpoints, such as ATA adapters, SIP-enabled DECT - and wireline devices■ Built-in emergency routing enables telephony without associated Lync or SBA

Fax Receiving

■ Receive and forward incoming faxes to the mailbox of the associated e-mail address■ Assignment of e-mail address via LDAP■ LDAP eliminates user configuration■ Connect local faxes via ATA adapter

Presence synchronisation

■ Presence status of locally connected devices is shown in Skype for Business■ Skype for Business users can see if someone is speaking on their DECT, SIP or analog telephones■ Busy on Busy for registered devices

+ Expand Skype for Business to Enterprise Voice+ Easy and fast commissioning in record time!+ Integration of standard SIP devices and SIP Trunks+ Also for hybrid cloud configuration+ No user administration - low TCO+ Microsoft® - BASIC Lync certification

Compact SIP-Gateway forMicrosoft® Skype for Business™

Unified Communications UCBox Gateway SIP

BRESSNER Technology GmbH Phone: +1-561-953-1866E-Mail: [email protected]

www.bressner.deLast Update: Juli 2016Specifications subject to change

Global Parameter Settings

■ Configuration of the local phone numbers on single page■ Configured in minutes■ Low maintenance during operation■ No expertise needed■ Prevents typical configuration errors

Configuration SIP Trunk

■ Drop-down list for preconfigured SIP providers■ Fast - only a few parameters to configure■ Other providers can be added by administrators

FAX and LDAP configuration

■ Incoming faxes are forwarded to e-mail inbox via AD access■ No user management necessary■ Integrated test function

Administration UCBox Gateway SIP

www.bressner.com Phone: [email protected]

Scenarios UCBox Gateway SIP

Integrate standard SIP Trunks with Skype for Business or Lync

The standard scenario is the expansion of your Skype for Business or Lync system using a UCBox Gateway to Connect standard SIP Trunks to a provider of your choice.

Integrate local SIP devices

The UCBox Gateway SIP can also be used to connect non-Microsoft certified, SIP-enabled devices with SfB or Lync. For example you can connect the following devices via certified UCBox Gateway SIP:■ Standard-SIP telephones■ ATA adapter for fax machines and indoor bells■ Existing SIP-enabled DECT systems■ SIP-enabled door intercoms

Presence display

The UCBox Gateway SIP can be used in conjunction with the FonComfort server presence option to display the pre-sence status for all registered devices in Lync and Skype for Business. This also allows the combination of a parallel ringing DECT phone and SfB/Lync client with simultaneous Busy on Busy regardless of whether a call has been accepted on Skype client or on the DECT phone.

Hybrid topology with Office 365 or hosted Skype for Business

In combination with a local Skype for Business server the SIP gateway can also be integrated with Office 365 or anotherprovider for hosted Skype for Business. So you can use all the benefits of an in-house solution like „real“ emergency calling, customized extensions of Skype for business and lower WAN bandwidth, combined with the safe operation of Skype for Business in the cloud.

www.bressner.com Phone: [email protected]

Additional information UCBox Gateway SIP

CompatibilityQualified for Microsoft Lync: https://technet.microsoft.com/en-us/office/dn788945.aspxCompatible with standard SIP Trunks, Skype for Business 2015 Lync 2010.2013,Microsoft Exchange and other SMTP email servers. Silverlight-enabled browserrequired.

More informationFor more information and other add-on products to Microsoft Skype for Businessand Lync ™, please visit our website: http://www.bressner.com/

UCBox product family

Skype for Business Lync 2013 Lync 2010 Exchange 2010 Exchange 2013 SIP-Telefone

www.bressner.com Phone: [email protected]


Recommended